On Location Recorder Instructions
description
Transcript of On Location Recorder Instructions
Swtich The Recorder On (switch on side).
Plug in the headphones & the Mic. Make sure there are batteries in both the recorder & the MIC.
Use 'Rec Level' buttons to set the peak level between -6 and 0. Always monitor the levels through the headphones.
Select input 1 (lit up in picture). Press 'Rec' once to
Press 'Rec' again to start recording! Press stop button to stop the
Connect the Recorder to the mac using the usb lead in the kit.
Use the scroll wheel to select 'storage' from the options. dePress the scroll wheel to
The recorder will appear on the desktop as a new drive.
In finder, select your audio file from the stereo>folder 1 location on the new drive.
Import into FCP X as normal.
When finished, eject the drive from the mac as normal.