Omega Series for seawater applications - hyxo.fi · Seals Synthetic rubber, NBR Control Brass,...
Transcript of Omega Series for seawater applications - hyxo.fi · Seals Synthetic rubber, NBR Control Brass,...
features:
flowrates filtration degrees inlet/outlet diameter minimum operating pressure
200 m3/h up to 5,000 m3/h (880 gpm up to 22,000 gpm)
500-10 micron 8” - 24” 2 bar (28 psi)
• Based on Amiad’s leading suction scanning screen filtration technology
• Highly efficient self-cleaning mechanism; fine filtration requirements, down to 10 micron
• Significant cost reduction per filtered cubic meter of water
• Smaller footprint
• Higher flow per unit
• ASME design optional
• Applications: Tertiary (Wastewater Treatment), Potable Water Treatment, Membrane Protection, Ballast Water, Oil&Gas, Industrial Water and Irrigation
• EX-proof available by request
Automatic self-cleaning multi-screen filter series provides higher efficiency and smaller footprint combines Amiad’s superior Suction Scanning mechanism with a multi-screen design.
Omega Seriesfor seawater applications
How the Omega Filter Works
GeneralThe Amiad Omega Series are automatic filters, with multiple screens operated by a single electric self-cleaning mechanism. The “Omega” filters range in flowrates of up to 5,000 m³/h (22,000 gpm) and from 500-10 micron filtration degree. Inlet/Outlet flanges are available from 8”-24” diameter.
The Filtration Process Raw water enters from the filter inlet and passes through the multi-screens. Clean water flows through the filter outlet. The gradual dirt buildup on the inner multi screen surface causes a filter cake to develop, with a corresponding increase in the pressure differential across the multi-screens. A pressure differential switch senses the pressure differential and when it reaches a pre-set value, the self-cleaning process begins.
The Self-Cleaning Process Cleaning of the filter is carried out by multiple suction scanners with an option for SLN (Spring Loaded Nozzles) which scans across the multi-screens by a common gear operated by up to 3 electric motors. The DP switch signals to open the exhaust valves creating a high velocity suction stream at the nozzle tip which “vacuums” the filter cake from the multi screens. During the self-cleaning process, which takes approximately 25 seconds, filtered water continues to flow downstream.
The Control System The Omega operation and cleaning cycle is controlled and monitored by a Programmable Logic Control (PLC).The PLC allows maximum flexibility in control options and has many features that can be incorporated per customer’s requirements. During the self-cleaning cycle the PLC controls a solenoid that operates the exhaust valves by means of an hydraulic command or compressed air.
The self-cleaning cycle begins under any one of the following conditions:1. Receiving a signal from the Pressure Differential Switch2. Time interval parameter set at the control board3. Manual Start
The control board also provides:
• Optional continuous flush mode
• Flush cycles counter
• Alarm output – may be used to open a bypass, shut-off a pump, etc.
Omega I / Omega II (Omega SeaWater)
Technical Specifications (flow data at 50 micron)
Filter Type Omega I Omega I E* Omega II Omega II E*
General Data
Maximum flowrate 340 m³/h 450 m³/h 675 m³/h 900 m³/h
Minimum working pressure 2 bar 2 bar 2 bar 2 bar
Maximum working pressure 10 bar (16 bar upon request)
10 bar (16 bar upon request)
10 bar (16 bar upon request)
10 bar (16 bar upon request)
Filtration area 13,500 cm2 18,000 cm2 27,000 cm2 36,000 cm2
Inlet/Outlet diameter8” – 10”
(Flange standards as per request)
8” – 10” (Flange standards
as per request)
12” – 14” (Flange standards
as per request)
12” – 14” (Flange standards
as per request)
Filter housing 610 mm (24”) 610 mm (24”) 813 mm (32”) 813 mm (32”)
Weight [empty/full] 450 / 900 kg 520 / 980 kg 800 / 1700 kg 925 / 1900 kg
Flushing Data
Exhaust valve 3” 3” 4” 6”
Flushing cycle time 25 sec 25 sec 25 sec 25 sec
Reject water volume per flush cycle 280 liter 350 liter 480 liter 560 liter
Minimum flow for flushing 40 m³/h 50 m³/h 70 m³/h 80 m³/h
Control and Electricity
Control voltage 24 VAC, 24 VAC,
Electric motor 1 HP – 0.72kW 1 HP – 0.72kW
Rated operation voltage 3 phase, 220/380/440 VAC 50/60 Hz 3 phase, 220/380/440 VAC 50/60 Hz
Current consumption 2.1 Amp 2.1 Amp
Construction Materials
Filter housing Carbon steel, rubber lined
Filter lid Carbon steel, rubber lined
Screens Weavewire 316L or SMO 254
Cleaning mechanism Stainless steel 316L or SMO 254
Exhaust valve Epoxy-coated cast iron, natural rubber
Seals Synthetic rubber, NBR
Control Brass, stainless steel, nylon
Standard Filtration Degrees
316 or SMO 254 Stainless Steel Weavewire Screen
micron 500 300 200 130 100 80 50 25 10
mm 0.5 0.3 0.2 0.13 0.1 0.08 0.05 0.02 0.01
mesh 30 50 75 120 155 200 300 450 600
* Extended Model.
* 40 micron screens available upon request.
Omega III / Omega IV (Omega SeaWater)
Technical Specifications
Filter Type Omega III Omega III E* Omega IV Omega IV E*
General Data
Maximum flowrate 1350 m³/h 1800 m³/h 2025 m³/h 2700 m³/h
Minimum working pressure 2 bar 2 bar 2 bar 2 bar
Maximum working pressure 10 bar (16 bar upon request)
10 bar (16 bar upon request)
10 bar (16 bar upon request)
10 bar (16 bar upon request)
Filtration area 54,000 cm2 72,000 cm2 81,000 cm2 108,000 cm2
Inlet/Outlet diameter14” – 16”
(Flange standards as per request)
14” – 18” (Flange standards
as per request)
16” – 18” (Flange standards
as per request)
18” – 24” (Flange standards
as per request)
Filter housing 1200 mm (48”) 1200 mm (48”) 1380 mm (55”) 1380 mm (55”)
Weight [empty/full] 1200 / 3000 kg 1500/ 3800 kg 1800 / 4300 kg 2000 / 5000 kg
Flushing Data
Exhaust valve 2x4” 2x6” 3x4” 3x6”
Flushing cycle time 2x25 sec 2x25 sec 3x25 sec 3x25 sec
Reject water volume per flush cycle 2x480 liter 2x560 liter 3x480 liter 3x560 liter
Minimum flow for flushing 2x70 m³/h 2x80 m³/h 3x70 m³/h 3x80 m³/h
Control and Electricity
Control voltage 24 VAC, 24 VAC,
Electric motor 2x(1 HP – 0.72kW) 3x(1 HP – 0.72kW)
Rated operation voltage 3 phase, 220/380/440 VAC 50/60 Hz 3 phase, 220/380/440 VAC 50/60 Hz
Current consumption 2x2.1 Amp 3x2.1 Amp
Construction Materials
Filter housing Carbon steel, rubber lined
Filter lid Carbon steel, rubber lined
Screens Weavewire 316L or SMO 254
Cleaning mechanism Stainless steel 316L or SMO 254
Exhaust valve Epoxy-coated cast iron, natural rubber
Seals Synthetic rubber, NBR
Control Brass, stainless steel, nylon
Standard Filtration Degrees
316 or SMO 254 Stainless Steel Weavewire Screen
micron 500 300 200 130 100 80 50 25 10
mm 0.5 0.3 0.2 0.13 0.1 0.08 0.05 0.02 0.01
mesh 30 50 75 120 155 200 300 450 600
* Extended Model.
* 40 micron screens available upon request.
3" Flushing Valve
INLET 8"OUTLET 8"
8" OMEGA I - 13.5K (RL/Sp. Coat.) FILTER ISO10ZZRD-55001
8" OMEGA I - 13.5K (RL/Sp. Coat.) - GA Drawing
FOR INFORMATION ONLY960+40
O76
010
20 (4
0.1”
)14
60 (4
.8”) 18
80+1
20
~250
0 m
ax.S
ER
VIC
E H
EIG
HT
340
(13.
4”)
500
+100
DESCRIPTION LAST REVISIONSDATENAMEREV SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
SCALE:
DRW. NO.
A4HSIZE -
APPROVED
DRAWN RudyK 17/04/2012
11 QTY: CAT #: CLIENT: OC #:
NO
Ø 610 (24”)
1880
(74”
) *2
500
(98.
4”)
12" Omega II 27,000 ISO10
12" OUTLET
FOR INFORMATION ONLYALL DIMENSIONS IN - mm
12" INLET
OMEGA II BW
1500 1500
2400
2100
Max
(82.
7”)
*250
0 (9
8.4”
)98
4 ~
2500
0 M
ax S
ervi
ce H
eigh
t
260(
10.2
”)
345
(13.
6”)
1100
(43.
3”)
570
LOW
ER
SE
RV
ICE
HE
IGH
T16
00U
PP
ER
SE
RV
ICE
HE
IGH
T
1150
O980
+50
SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
DESIGNED
SCALE: A3HSIZE -
DATENAME
APPROVED
DRAWN
DESCRIPTION LAST REVISIONSDATENAMEREV
RudyKRudyK
04/03/2012
04/03/2012
12inch Omega II 27.000 cm2
11AMIAD FILTRATION SYSTEMS LTD. \\a-s
erve
r\R&
D\P
roje
cts\
P00
55\A
lfa L
aval
\om
ega
alfa
lava
l\om
ega
II\re
v 2\
assy
alfa
lava
l rev
2.as
m
CAT NO.
NO
Ø 813 (32”)
4" Flushing Valve
SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
DESIGNED
SCALE: A3HSIZE -
DATENAME
APPROVED
DRAWN
DESCRIPTION LAST REVISIONSDATENAMEREV AMIAD FILTRATION SYSTEMS LTD.
12" Omega II 27,000 ISO10
12" OUTLET
FOR INFORMATION ONLYALL DIMENSIONS IN - mm
12" INLET
OMEGA II BW
260
(10.
2”)
345
(13.
6”)
1095
(43.
1”)
572
LOW
ER
SE
RV
ICE
HE
IGH
T
1148
O979
+50
RudyKRudyK
04/03/2012
04/03/2012
12inch Omega II 27.000 cm2
11 \\a-s
erve
r\R&
D\P
roje
cts\
P00
55\A
lfa L
aval
\om
ega
alfa
lava
l\om
ega
II\re
v 2\
assy
alfa
lava
l rev
2.as
m
CAT NO.
NO
2250
Ø 813 (32”)
2250
(88.
5”)
* 25
00 (9
8.4”
) 6" Flushing Valve
14" OMEGA III 54.0K Filter ISO10
14" OMEGA III 54.0K - GA DrawingZZRD-55003
FOR INFORMATION ONLYALL DIMENSIONS IN mm
2 x 4" Flushing Valve
14" INLET14" OUTLET
2070
(81.
5”)
*250
0 (9
8.4”
)16
40 (6
4.5”
)O
1405
380
(15”
)
1060
(41.
7”)
1603
2500
mm
max
. ser
vice
hei
ght
DESCRIPTION LAST REVISIONSDATENAMEREV SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
SCALE:
DRW. NO.
A4HSIZE -
APPROVED
DRAWN RudyK 16/05/2012
11 QTY: CAT #: CLIENT: OC #:
AMIAD FILTRATION SYSTEMS LTD.
NO
Ø 1200 (48”)
DESCRIPTION LAST REVISIONSDATENAMEREV SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
SCALE:
DRW. NO.
A4HSIZE -
APPROVED
DRAWN
QTY: CAT #: CLIENT:OC #:
AMIAD FILTRATION SYSTEMS LTD.
14" OMEGA III 54.0K Filter ISO10
14" OMEGA III 54.0K - GA DrawingZZRD-55003
FOR INFORMATION ONLYALL DIMENSIONS IN mm
2 x 6" Flushing Valve
14" INLET14" OUTLET
1640
(64.
5”)
1405
380
(15”
)
1056
(41.
5”)
1603
2500
mm
max
. ser
vice
hei
ght
RudyK 16/05/2012
11NO
2320
(91.
3”)
*250
0 (9
8.4”
)
Ø 1200 (48”)
DESCRIPTION LAST REVISIONSDATENAMEREV SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
SCALE:
DRW. NO.
A4HSIZE -
APPROVED
DRAWN
QTY: CAT #: CLIENT:OC #:
24" OMEGA IV - 81.0K (RL/Sp. Coat) FILTER ISO10
24" OMEGA IV - 81.0K (RL/Sp. Coat) - GA DrawingZZRD-5504
FOR INFORMATION ONLYALL DIMENSIONS IN - mm
3 x 4" Flushung valves
1625 ref
1762
±50
1350O OD
RudyK 24/05/2012
11NO
2710
(106
.7”)
* 3
000
(118
”)22
30 (8
7.8”
)
Ø 1350 (53”) OD
550
(21.
6”)
3 x 6" Flushing Valve
DESCRIPTION LAST REVISIONSDATENAMEREV SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
SCALE:
DRW. NO.
A4HSIZE -
APPROVED
DRAWN
QTY: CAT #: CLIENT:OC #:
24" OMEGA IV - 81.0K (RL/Sp. Coat) FILTER ISO10
24" OMEGA IV - 81.0K (RL/Sp. Coat) - GA DrawingZZRD-5504
FOR INFORMATION ONLYALL DIMENSIONS IN - mm
3 x 4" Flushung valves
1934
(76.
1”)
1444
(56.
8”)
550
(21.
6”)
387
(15.
2”)
30
00 m
m m
ax. s
ervi
ce h
eigh
t
956
+100
1625 ref
1762
±50
1350O OD
2337
+100
RudyK 24/05/2012
11NO
Ø 1350 ( 53”) OD
2410
(94.
8”)
* 30
00 (1
18”)
3 x 4" Flushing Valve
*Approx. length required for maintenance.Dim. in mm (inch)
Extended ModelsStandard ModelsOmega I
Omega II
Omega III
Omega IV
DESCRIPTION LAST REVISIONSDATENAMEREV SHEET- OF-
SUBJECT :
PART NAME:
MATERIAL :
REV
SCALE:
DRW. NO.
A4HSIZE -
APPROVED
DRAWN
QTY: CAT #: CLIENT:OC #:
INLET 8"OUTLET 8"
8" OMEGA I - 13.5K (RL/Sp. Coat.) FILTER ISO10
ZZRD-550018" OMEGA I - 13.5K (RL/Sp. Coat.) - GA Drawing
FOR INFORMATION ONLY956+40
760
RudyK 17/04/2012
11NO
2250
(88.
5”)
*250
0 (9
8.4”
)
1630
1020
(40.
1)
Ø 610 (24”)
3" Flushing Valve
340
(13.
4”)
IndustryMunicipal Irrigation
W A T E R S Y S T E M S
06.2012www.amiad.com
HeadquartersAmiad Water Systems Ltd. D.N. Galil Elyon 1, 12335, Israel,Tel: 972 4 690 9500, Fax: 972 4 690 9391,E-mail: [email protected]
North AmericaMain Office and Manufacturing:120-J Talbert Road, Mooresville, NC 28117,Tel: 1 704 662 3133, Fax: 1 704 662 3155, Toll Free: 1 800 24 FILTERE-mail: [email protected] www.amiadusa.com
West Coast Sales Office and Warehouse:2220 Celsius Avenue, Oxnard, California 93030Tel: 805 988 3323, Fax: 805 988 3313, Toll Free: 1 800 969 4055
ChileAmiad Andina, Carretera General San Martín 16.500 No 30,Loteo Industrial Los Libertadores, Colina, Santiago de Chile,Tel: 56 2 489 5100, Fax: 56 2 489 5101,E-mail: [email protected]
BrazilE-mail: [email protected]
Amiad Oil & Gas,E-mail: [email protected]
EuropeAmiad Water Systems Europe SAS,Ilot No4 ZI La Boitardière, 37530 Chargé, France,Tel: 33 (0) 2 47 23 01 10, Fax: 33 (0) 2 47 23 80 67,E-mail: [email protected]
Germany
Amiad Filtration Solutions (2004) Ltd. Zweigniederlassung
Deutschland Prinz-Regent-Str. 68 a 44795 Bochum,
Tel: 49 (0) 234 588082-0, Fax: 49 (0) 234 588082-12,
E-mail: [email protected]
TurkeyFTS – Filtration & Treatment Systems, Istanbul yolu 26 Km,Yurt Orta Sanayii, Saray, Ankara, Tel: 90 312 8155266/7,Fax: 90 312 8155248, E-mail: [email protected]
IndiaAmiad Filtration India Pvt Limited, 305 Sai Commercial BuildingGovandi St Rd, Govandi Mumbai 400 088, Tel: 91 22-67997813/14,Fax: 91 22-67997814, Email: [email protected]
ChinaAmiad China (Yixing Taixing Environtec Co., Ltd.) 70 Baihe Chang, Xingjie Yixing Jiangsu, 214204,Tel: 86 510 87134000, Fax: 86 510 87134999,E-mail: [email protected]
South-East AsiaFiltration & Control Systems Pte. Ltd., 19B Teo Hong Road,088330 Singapore, Tel: 65 6 337 6698, Fax: 65 6 337 8180,E-mail: [email protected]
AustraliaAmiad Australia Pty Ltd. 138 Northcorp Boulevard,Broadmeadows, Victoria 3047,Tel: 61 3 93585800, Fax: 61 3 93585888,E-mail: [email protected]