old rates
-
Upload
harleen-kaur -
Category
Documents
-
view
214 -
download
0
Transcript of old rates
-
7/30/2019 old rates
1/7
Supply Erection Total
1 Pipes and Valves etc.
2Fire Fighting Equipment & Accessories for
External Hydrant
3 Fire Brigade Connection/Miscellaneous
4 Civil Works for Fire Protection System
5
Fire Pumps, Mechanical & Electrical
Accessories diesel pump and fire pumps andpanels.
TOTAL
DESCRIPTIONS. No.
MAHINDRA & MAHINDRA - Swaraj Foundry Division
FIRE FIGHTING WORKSS U M M A R Y
-
7/30/2019 old rates
2/7
NEW OLD
SH-01 PIPES AND VALVES
1 Pipes for External Fire Fighting/Yard Hydrant System
Supply, installation, Testing & Commissioning of M.S.
Black ERW Heavy grade piping as per IS: 1239. The
pipes complete with necessary specials such as tees,
bends, flanges, reducers, etc. Rate quoted shall include
for painting of pipe with a coat of primer and two coats of
synthetic enamel paint of approved colour / make for
aboveground piping and coating & wrapping for
underground piping as per the NBC/ IS standards and
local fire service department requirements, complete in
all respects.Underground piping with necessary flanges & fittings
such as elbows, tees alongwith pipe coating and
wrapping of underground pipes with 4 mm thick & 100
mm wide approved bitumen based wrapping material
(Pypkote)
a) 100mm dia R.M. 78 1,280 1,152
-
2
Above ground piping with necessary flanges & fittings
such as elbows, tees and Painting with synthetic enamel
paint two coats with one primer coat as per the
requirement of local fire service department
-
a) 200 mm dia R.M. 6 1,968 1,771
b) 150mm dia R.M. 18 1,825 1,643
c) 100mm dia R.M. 260 1,280 1,152
d) 80mm dia R.M. 12 850 765
e) 25 mm dia R.M. 12 375 338
-
3
Providing & fixing Sluice valve (double flanged) of CI
body and brass non-rising type sprindle for PN 1.6 rating,
conforming to IS:14846 complete in all respects.
a) 200mm dia Each 2 19,800
4
Providing and Fixing Butterfly Valve (Double Flanged)
with C.I. Body & disc stainless steel / carbon steel, shaft
hand lever operated PN: 1.6 rating confirming to IS
13095 / BS 5155a) 150mm dia Each 2 8,625 7,763
b) 100mm dia Each 4 6,750
c) 80 mm dia Each 1 4,980
5Providing and fixing gunmetal non-return valves vertical
or horizontal tested to 20 Kg/cm2 as per IS:778
a) 150 mm dia Each 2 6,900
b) 100 mm dia Each 1 6,670
c) 80 mm dia Each 1 4,750
Supply
PROJECT
FIRE FIGHTING WORKS
MAHINDRA & MAHINDRA FOUNDRY
S.No Description Unit Qty.
-
7/30/2019 old rates
3/7
NEW OLD A
SupplyS.No Description Unit Qty.
6
Providing, fixing and testing ofexternal fire hydrants
with 63 mm dia single outlets and with instantaneous
type pipe threaded make coupling for connection to hose
conforming to IS:5290 Type-A (Oblique) inlets flanged,
mounted on a 80mm dia stand post with companion
flanges, 1.6mm thick compressed asbestos gasket,
bolts, nuts and washers complete as per approved
design.The stand post to be tapped from the external
ring, supported on a pedestal.
Each 7 6,050
7
Providing and fixing external fire hose box, wall
mounting or free standing type, made out of Mild Steel
18 SWG sheet, of approved colour of 30"x24"x10" size to
accommodate two 15m length of delivery hoses and a
branch pipes with glass fronted double door with lock
and keys and break glass recess for keys, all complete.
Each 7 3,400
8
Providing and fixing standard short size branch pipe
with hand operated gunmetal 20mm nominal bore outlet
with standard instantaneous type 63mm dia coupling as
er IS: 903.
a) Gunmetal branch pipe & nozzle. Each 5 1,850
9
Providing and fixing first aid fire hose reel (with wall
mounting swinging-type drum complying to IS:884), fitted
with Thermo Plastic Synthetic Reinforced material
conforming to IS:12585-1988 Type II 20 mm bore, with
standard size brass outlet and shut off valve, brackets,
complete in all respects.
Each 7 6,950
10
Providing and fixing 63mm dia 15m long rubberized
fabric lined hose including gunmetal male and female
instantaneous type coupling approved by fire authority,
machine wound with copper wire complete in all respects
hose to IS:636 type-II and coupling to IS: 903 with ISI
certification.
Each 14 4,400
11
Providing and fixing fire brigade suction hose coupling
(draw out connection) with nut for female coupling as
per I.S:902-1974 complete with foot valve (To be
connected to static tank)
Each 1 14,500
-
7/30/2019 old rates
4/7
NEW OLD Amou
SupplyS.No Description Unit Qty.
12
Excavating (All kinds of soil) trenches of required width
for pipes, cables, etc including excavation for sockets,
and dressing of sides, ramming of bottoms, depth upto1.5m including getting out the excavated soil, and then
returning the soil as required, in layers not exceeding
20cm in depth including consolidating each deposited
layer by ramming, watering, etc. and disposing of surplus
excavated soil as directed, within a lead of 50m :
APipes, Cables etc, exceeding 80mm dia. but not
exceeding 300mm dia.R.M. 150 0
13
Constructing masonry Chamber 100x100x100 cm, inside
with 75 class designation brick work in cement moryar
1:5 ( 1 cement : 5 fine sand ) for sluice valve, with
C.I.surface box 100mm top diameter, 160mm bottom
diameter and 180mm deep (inside) with chained lid andRCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size) necessary
excavation foundation concrete 1:5:10 ( 1 cement : 5
coarse sand : 10 graded stone aggregate 40mm nominal
size) and inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand ) 12mm thick finished with a
floating coat of neat cement complete as per standard
design.
Each
14
Providing and laying reinforced cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 stone aggregate 20mm
nominal size) for anchor/thrust blocks, complete i/c
shuttering, centering curing, and reinforcement includingremoval of shuttering complete.
Cum.
15 Fire Pumps & Accessories
Supplying, installation, testing & commissioning of
electric driven fire pump suitable for automatic operation
consisting of the following (as per specification).
Horizontal split casing single/ multistage, single/
multioutlet pumping set complete with bronze impeller
with C.I. body, SS shaft and sleeve and connected by a
flexible coupling to a tatally enclosed fan cooled squirrel
cage induction motor Mounted on common bed plate of
fabricated mild steel channel with cushy foot mountingwith all pump accessories complete as per specification
including pressure gauges, mechanical seal, lubricated
grease bearing, gun metal isolation valves etc.
Motor to be suitable for 415V, 50Hz, AC supply of
required H.P (or as per pump efficiency) rating for the
above pumps. Motor shall accept +/- 10% variation in
voltage and +/- 3% variation in frequency.
-
7/30/2019 old rates
5/7
NEW OLDSuppS.No Description Unit Qty.
(A) Main fire Pump HYDRANT
Type : Horizontal Split casing centrifugal suctiontype
Speed (rpm) : 2900 rpm
Capacity : 2280 lpm
Head : 56 m
HP- 60 hp Each 1 169,500
(B) Jockey Pump
Type : Horizontal Split casing centrifugal suctiontype
Speed (rpm) : 2900 rpm
Capacity : 180 lpm
Head : 56 m
HP : 10 HP Each 1 58,500
C Main DIESEL PUMP
Type : Horizontal Split casing centrifugal suctiontype
Speed (rpm) : 1800 rpm
Capacity : 2280 lpm
Head : 56 m
82 Bhp Each 1 378,500
WITH FUEL TANK 240 LTRS
WITH 12 VOLT BATTERIES
WITH OILS LIKE ENGINE,COOLENT,MOBILEOIL
16 Panel for ABOVE FIRE PUMPS Set 1 168,000
for automation as per pump requirement
ACESSORIES L&T, ANALOG MEETERING
AND REQD ACESSORIES
17 Pressure Vessel for Fire Pump
Supply, Installation, Testing & Commissioning double
flanged vertical air vessel fabricated from 10mm M.S.
plate with dished ends from 10mm M.S. plate, outside
with one coat of primer and two coats of synthetic
enamel paint of approved shade, complete with
approved quality and sufficient number of pressure
switches, air release valve, tripod type stand, pressure
gauge with ball valve, drain ball valve of 50mm dia with2.0 meter long GI (H) piping complete as required and all
other required accessories to operate commonly main
fire pump, diesel fire pump and Jockey pump at drop of
pressure, automatically at required pressure setting;
Recommended dia. : 200mm
Height of shell :1500mm Each 1 17,500
-
7/30/2019 old rates
6/7
NEW OLD
SupplyS.No Description Unit Qty.
18
Supplying and fixing of following powder coated
perforated type cable tray system including fittings and
accessiores on existing structural supports, fabricated
from min. 2mm thick CRCA MS sheets inluding the cost
of powder coatings of approved shade of min. 50 micron
film thickness on MS surface cleaned and perepared
twith 7 tank process and including the cost of provinding
loop earthing with 2 nos. 25mm x 6mm GI earth strips
complete as per specifications and inluding the cost of
approved arrangement of cable tray hangers fabricated
from galvanized MS angles/flats/rods including jointg the
steel section of the suupport arrangement with nuts and
bolts/welding and including securing the support to the
structural ceiling by dash fasteners etc.complete with
spacing of 600mm for 900mm/1200mm and 750mm forlower sizes, as required, and as below.
a) 300mm x50mmx50mm trays Metre 30 385
b) 150mmx50mmx50mm trays Metre 25 290
20Providing and fixing Expansion bellows with required
flanges and fasteners for delivery header of pumps
a) 150mm dia (min. 150 mm length) Each 2 4,950
b) 80 mm dia (min. 150 mm length) Each 1 3,980
21.0
Providing and fixing pressure gauge (for operation at 0-
14 Kg./sqcm) with necessary flanges and fittings such
as tees elbows and painting and supports etc. complete
a) 100 mm dia Each 3 1,800
22.0
Providing and fixing pressure switch (for operation at 0-
15 Kg/sqcm) with required fittings and accessories
complete
a) Standard type Each 3 1,650
23.00
Providing and fixing heavy duty copper armored cables
1.1 KVA grade including necessary support clamps at
ceiling level and connection legs complete in all
respects.
a) Control cable 6 core 1.5 Sq.mm Metre 20 250
b) Control cable 4 core 1.5 Sq.mm Metre 20 220
c) Control cable 2 core 1.5 Sq.mm Metre 20 180 MATERIAL REQUIRED FOR PUMP ,PANEL,MOTOR
AND VESSEL EARTHING WITH PETROL PUMP
24
Providing and fixing heavy duty Aluminum armored
cables 1.1 KVA grade including necessary support
clamps at ceiling level, connection lugs and double
compression glands, complete in all respects.
a) Power cable 3 core 16 Sq.mm Metre 30 665
b) Power cable 3 core 95 Sq.mm Metre 30 885
-
7/30/2019 old rates
7/7
Sl Item Descriptions Make
1 Pipes for External Fire Fighting/Yard Hydrant
System
TATA
2 Wrapping & Coating PIPKOTE (IWL)
3 Paint BERXER/ASIIAN
4 Butterfly Valve AUDCO
5 Gunmetal non-return valves SANT
6 External fire hydrants MINIMAX/NEWAGE
7 Landing valve hydrants MINIMAX/NEWAGE
8 First aid fire hose reel MINIMAX/NEWAGE
9 Rubberized fabric lined hose MINIMAX/NEWAGE
10 Fireman axe MINIMAX/NEWAGE
11 FIRE BRIGADE CONNECTIONS MINIMAX/NEWAGE
12 Electric Fire Pump KIRLOSKER/CROMPTON
13 Jockey Pump KIRLOSKER/CROMPTON
14 Diesel Engine Driven Fire Pump KIRLOSKER/CROMPTON
15 Motor KIRLOSKER/CROMPTON
16 Control Panel L&T
17 Pressure gauge WAREE
18 Copper armored cables HAVELS/EICO
19 panels L&T20 wires HAVELS/EICO