3122

.2

D 5800 -10

D3241-09e1

D2983-09 GSO /1785 :2007

ISO 199011:2005

ISO 199012:2004

ISO 199014:2003

Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels Standard Test Method for LowTemperature Viscosity of Lubricants Measured by Brookfield Viscometer Lubricating Oils for internal Combustion Engines Comparison evaluation of oxidation stability for base oil and lubricating oil by oxidation glass cell Petroleum and natural gas industries -Specific requirements for offshore structures -- Part 1: Metocean design and operating considerations Petroleum and natural gas industries -Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria Petroleum and natural gas industries -Specific requirements for offshore structures -- Part 4: Geotechnical and foundation design considerations

- : - - - 2: - - 4:

.3

.4 .5 .6

.7

.8

.9

3122

ISO 199015:2003 ISO 19903:2006 ISO 199041:2006 ISO 10416:2008 ISO Guide 73:2009 ISO 3010:2009 ISO 31000:2009 ASTM D404504 ASTM D513408 ASTM D704210

Petroleum and natural gas industries -Specific requirements for offshore structures -- Part 5: Weight control during engineering and construction Petroleum and natural gas industries -Fixed concrete offshore structures Petroleum and natural gas industries -Floating offshore structures -- Part 1: Monohulls, semi-submersibles and spars Petroleum and natural gas industries -Drilling fluids -- Laboratory testing Risk management Vocabulary Risk management Ris Assessment Techniques Risk management Principles and Guidelines Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of

- - 5: - - : 1 - - - - - - ) (

.:

.21 .22 .23 .24 .25 .26 .27

.28

.29

3122

Kinematic Viscosity) ISO 3771 :1994 Petroleum products -- Determination of base number -- Perchloric acid potentiometric titration method Petroleum products -- Determination of bromine number of distillates and aliphatic olefins -- Electrometric method Crude petroleum and liquid petroleum products -- Laboratory determination of density -- Hydrometer method. Crude petroleum and petroleum products -- Determination of density -- Oscillating U-tube method Petroleum product Determination of carbon residue Ramsbott1om method Petroleum product Determination of oxidation stability of gasoline Induction period method. Petroleum products - Determination of boiling range distribution - Gas chromatography method Test method for water vapour content of gaseous fuels using electronic moisture analyzer - - - - .2:

3839 :1996 ISO

.31

ISO 3675:1998 ISO 12185:1996 ISO 4262:1993

.32

.33 .34

ISO 7536:1994

.35

GSO ISO 3924:2008 ASTM D5454-04

.36

.37

3122 .38

Preparation of steel substrates before ISO 8504 - 2 application of paints and related products Abrasive blast-cleaning methods Preparation of steel substrates before application of paints and related products ISO 8504 - 3 Hand- and power-tool cleaning methods Crude petroleum and petroleum products -- Transfer accountability -- Assessment ISO 8697:1999 of on board quantity (OBQ) and quantity remaining on board (ROB) Crude petroleum and petroleum products - Transfer accountability - Assessment of ISO vessel experience factor on loading 13740:1998 (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels Crude petroleum -- Transfer ISO 9403:2000 accountability -- Guidelines for cargo inspection Crude petroleum and petroleum products ISO -- Bulk cargo transfer -- Guidelines for 11563:2003 achieving the fullness of pipelines Petroleum and natural gas industries -ISO10431:1993 Pumping units Specification Petroleum & Natural Gas Industries; SAES-A-111 Borrow Pit Requirements

- - - - ( ) ( ) - - ( ) ( ) - - - -

.39

.3:

.41

.42

.43 .44 .45

3122 .46 .47 .48 .49 .4: .51 .52

SAES-A-115 SAES-D-116 ISO 10442 32-SAMSS016 ISO 13709 01-SAMSS035 SAEP-1132

Petroleum and natural gas industries Groundwater Monitoring Well Design Petroleum and natural gas industries Underground Storage Tank SystemPetroleum & Natural Gas Industries; Integrally-Geared Centrifugal Air Compressors

:

Petroleum & Natural Gas Industries; Self-Cleaning Air Filters Petroleum & Natural Gas Industries; Centrifugal pumps for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries specifications Line Pipe Petroleum and natural gas industries Instructions for Using the Relief Valve Test Stand Petroleum and natural gas industries Relief Valve Technician Certification Petroleum and natural gas industries Air Dispersion Modeling and Emission Inventory Petroleum and natural gas industries Project Environmental Impact Assessments Petroleum and natural gas industries Solid Waste Landfill Standard

SAEP-1134

.53

SAEP-340

.54

SAEP-13 SAES-S-007

.55 .56

3122 .57 .58 .59

SAEP-1661 17-SAMSS006 SAEP-1161

SAES-A-004

Petroleum and natural gas industries Waste Minimization Opportunity Assessments Petroleum and natural gas industries Galvanic Anods for Cathodic Protection Petroleum and natural gas industries Testing and Inspection (T&I) Reporting Procedure Petroleum and natural gas industries General Requirements for Pressure TestingPetroleum and natural gas industries Certification Review and Registration of Project Welders

- - ) ( ( RTR) - -

.5:

SAEP-324

.61

SAMSS

SMASS

SMASS

SMASS

Petroleum and Natural gas Industries: Cathodic Protection of Above ground storage Tanks Petroleum and Natural gas Industries: Reinforced Thermoset Resin (RTR) Pipe and Fittings in water and Hydrocarbon Services Petroleum and Natural gas Industries: Design of Nonmetalic Piping in water and Hydrocarbon Injection Systems Petroleum and Natural gas Industries: Construction of Nonmetalic Piping in water and Hydrocarbon Injection

.62

.63

.64

.65

3122

Systems Test Method for Standard Determination of Total Volatile Sulfur in Hydrocarbons and Liquefied Gaseous Petroleum Gases and Natural Gas by Fluorescence Ultraviolet Standard Terminology Relating to Gaseous Fuels / /

ASTM D7551-10

.66

ASTM D4150-08

.67

Standard Test Method for Total Sulfur D ASTM Hydrogenolysis and in Gaseous Fuels by 4468-85(2006) Rateometric Colorimetry Standard Practice for Total Sulfur ASTM D7166On-line/At-line for Analyzer Based 10 Sulfur Content of Gaseous Fuels ASTM Test Methods for Relative Standard D1070 03 Density of Gaseous Fuels (2010) Standard Practice for On-line/At-line ASTM of Gaseous Determination Heating Value D7164-10 Fuels by Gas Chromatography Practice for Determination of Standard ASTM the Heating Value of Gaseous Fuels D7314-10 Calorimetry and On-line/At-line using Sampling

.68

.69

.6:

.71

.72

3122

ASTM D7165 10 ASTM D1071 83(2008) ASTM D4931 06 ASTM D478493(2010) ASTM D62282010 ASTM D446885(2006)

Practice for Gas Standard Chromatograph Based On-line/At-line Content of Gaseous Analysis for Sulfur Fuels Test Methods for Volumetric Standard Measurement of Gaseous Fuel Samples Test Method for Gross Standard Coke Petroleum Moisture in Green Specification for LNG Standard Density Calculation Models Standard Test Method for in Determination of Sulfur Compounds Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection Standard Test Method for Mercaptans Length-of-Stain in Natural Gas Using Detector Tubes QUALITY REQUIREMENT FOR PROCUREMENTS OF MATERIALS FOR OIL AND GAS INDUSTRY QUALITY REQUIREMENT FOR PROJECTS IN OIL AND GAS INDUSTRY

/

.73

.74 .75 .76

.77

.78

.79

.7:

3122 .81 .82

External coating of riser Petroleum and natural gas industries: Corrosion Inhibitors and their Injection Package for Oil and Production Petroleum and natural gas industries : Fabrication, Inspection and installation of Cabon, Carbon-Manganes and low alloy Ferritic Steel Process Pipework Petroleum and natural gas industries: Fabrication, Inspection and installation of Austenitic and 25% Cr Supper Duplex Stainless Steel, Copper Base and Nickel Base Alloy Process Pipework Internal coating and lining of steel Pressure Vessels Petroleum, and natural gas industries -Materials selection and corrosion control for oil and gas production systems Refrigerated light hydrocarbon fluids -Sampling of liquefied natural gas -Continuous and intermittent methods Refrigerated light hydrocarbon fluids -General requirements for automatic level gauges -- Part 2: Gauges in refrigeratedtype shore tanks Petroleum, and natural gas industries

: : , : 52% : :

.83

.84

ISO 21457:2010 ISO 8943:2007

.85 .86

.87

ISO 181322:2008

.88

.89

3122

Pipeline Internal coating lining part 1 : liquid Epoxy coating Petroleum, and natural gas industries: Pipeline Internal coating lining part 2: Fusion Bonded Epoxy coating TECHNICAL SPECIFICATION FOR CLEANING, GAUGING AND FLOODING OF NEW PIPELINES TECHNICAL SPECIFICATION FOR HYDROSTATIC TESTING OF NEW PIPELINES PRE-COMMISSIONING AND COMMISSIONING OF PIPELINES Petroleum, petrochemical and natural gas ISO industries -- Reciprocating positive 13710:2004 displacement pumps Petroleum and natural gas industries -ISO 19901 - 3 : Specific requirements for offshore 2008 structures -- Part 3: Topsides structure Petroleum and natural gas special ISO 19901 - 6 : requirements of offshore installations 2008 Part VI - Naval operations Petroleum and natural gas industries -ISO15546:2007 Aluminum alloy drill pipe Petroleum and natural gas industries -ISO 15156Materials for use in H2S-containing 1:2006 environments in oil and gas production --

: : : : - - - -- : 1 -- H2S

.8:

.91

.92 .93 .94

.95

.96 .97 .98

3122

Part 1: General principles for selection of cracking-resistant materials Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2 : cracking-resistant carbon and low alloy steels, and the use of cast irons Petroleum and natural gas industries -Materials for use in H2S -containing environments oil and gas production part3 :Cracking -resistant CRAs (corrosion-resistant alloys) and other alloys. Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures Petroleum products -- Fuels (class F) classification -- Part 1: Categories of marine fuels Petroleum products -- Fuels (class F) -Specifications of marine fuels Salt in crude oil ( electronetric method ) Saybolt colour of prtroleum products ( saybolt chromometer method ) Refrigerated non-petroleum-based

- 2 : - H2S - 3: - ( ) . : -) - ( - - - ( )-

ISO 151562:2006

.99

ISO 151563:2006

.9:

/

ISO 20340:2009 /

.:1

.:2 .:3 .:4 .:5 .:6

3122

liquefied gaseous fuels -- Dimethylether (DME) -- Method of manual sampling onshore terminals / Fireproofing of Structural Steel Work Unification of flow meter accuracy in petroleum industries Fire protection system and safety equipment Petroleum, petrochemical and natural gas industries -- Sector-specific quality management systems -- Requirements for product and service supply organizations Petroleum and natural gas industries -Cements and materials for well cementing -- Part 1: Specification Petroleum and natural gas industries -Drilling and production equipment -Part 4: Practices for side-pocket mandrels and related equipment Petroleum, petrochemical and natural gas industries - Method of test for fire dampers

- - - - 1 - - : 4 - - .:7 .:8 .:9

/

.::

.211

.212

.213

213

22131 1 1 312 1 ) (DS