OGR Document Anatomy of the Olliepede
-
Upload
olivergadsby -
Category
Documents
-
view
220 -
download
0
Transcript of OGR Document Anatomy of the Olliepede
-
8/4/2019 OGR Document Anatomy of the Olliepede
1/11
-OGR -
GREENLIGHT REVIEWUNIT ONE:
ANATOMY
Introduction to the Olliepede
OLIVER GADSBYCG Arts and Animation (BA Hons)
-
8/4/2019 OGR Document Anatomy of the Olliepede
2/11
Contents Page:1.Eye designs
2.Chosen eye design+
3.Head/Face designs4.Chosen Head/Face design
+
5.Upper body/Arm designs6.Chosen Upper body/Arm design
+
7. Lower body/Leg designs8.
Chosen Lower body/Leg design+
9.Conclusion of the overall creature and its progression
-
8/4/2019 OGR Document Anatomy of the Olliepede
3/11
CThis page shows the direction the favourite thumbnails for the EYE DESIGNS, have taken me. I chose to incorporate24,29 and 30 to create the best design possible, taking into account the proportions, the spacing and the overallcharacteristics of the optics millipedes eye.
24
was used as the
base idea for how the
eye is built up using the
optics of the eye, 29
gave me the idea of
segmentation, kind of
like treating the iris and
pupil as if it were an
orange.30
Gave to me
the feeling of closeness
towards the remainder
of the human eye and
how it would to used to
sprout its hybridised
form. The next page
is the outcome and
what Id like to use
on the finalised
creature.
1.
-
8/4/2019 OGR Document Anatomy of the Olliepede
4/11
This is the end design for the hybridized eye. 2.
-
8/4/2019 OGR Document Anatomy of the Olliepede
5/11
These are the favourite thumbnails for my humanoid head and face. I chose these three because of
the depth of character they held due to their interesting adaptations, as with the eye designs, I chose
to incorporate the best parts of 9,10 and 11 to create what was suitable for my hybrid.
9 is the base
idea of which I
add aspects of
the other two, 9
in general is the
most human
and that needs
to be kept
because my
right eye is
going to remainhuman, also.
10 gives me
the broadness I
need for the jaw
and the antenna
shape whereas
11 gives me
the antenna
positioning andbetter jaw
construct.
3.
-
8/4/2019 OGR Document Anatomy of the Olliepede
6/11
This is the humanoid head and face I shall use on for my hybrid,
includes the human eye as well as the millipede eye.
Olliepede Photoshop
variation, one.Olliepede Photoshop
variation, two.
Note: The Photoshop designs were
created before the centred design,
other digital paintings will follow in
its footsteps.
4.
-
8/4/2019 OGR Document Anatomy of the Olliepede
7/11
5 I felt was my only viable thumbnail as well as the
aesthetics design of 23.
5 is basically
making use of
the strength,
flexibility and
durability of
the Millipedes
body
structure.
Linking with
the arms and
shoulders (The
exoskeletonalso morphs
around the
upper back).
23 implies the
use of hybrid
based
blemishes that
latch out from
the limbs andonto the body.
The end result
is as follows.
5.
-
8/4/2019 OGR Document Anatomy of the Olliepede
8/11
The refined and chosen idea, Ill use for the end
design.
Note: The Ollie-esqueproperties have taken placein this design; I am left-handed so my left arm ispredominantly better thanthe right.
6.
-
8/4/2019 OGR Document Anatomy of the Olliepede
9/11
These are the lower body and leg designs. This in the final part to my carefully set, millipede
jigsaw, and the image below is comprised of the favourite thumbnail sketches which I found fit
to amalgamate into the end design like the previous pieces of segments.
4, one of my very first
ideas and one Im proud of
due to its biological
enthusiasm, the Minotaur
stylisation really relates
and feels at home with the
hybridisation as a whole.
40 is the sleek adaptation
of 4, minus the all
important legs, 39 is the
most controversial
because my theory is that
when the millipede wasspliced with myself,
dormant ancestral genes
from its pre-historic
cousin are activated,
creating the flatter and
more jagged exoskeleton.
39 is down to evolutionary
understanding, when a
creature evolves, it usually
does so in order to protect
itself, reducing the risk of
being killed basically, theunderbelly shall be
protected by overlaps of
exoskeleton,protruding
towards to front. The next
consists of the final key
piece to the Ollie +
Millipede, hybrid.
7.
-
8/4/2019 OGR Document Anatomy of the Olliepede
10/11
This is the end design for the lower body and
legs of which Id like to use for the hybrid.
8.
-
8/4/2019 OGR Document Anatomy of the Olliepede
11/11
The combination of these segments
shall be concluded as a whole once
the structure and the more scientific
approach to this design is made and
calculated. By this I mean the linking
of the skeletal frame, both internal and
external. If any changes are made it ll
be due to reinforcement but Im pretty
certain that the design right now isstructurally sound, I love physics so I
that is a part Im sure Ill get right as I
progress, thank you and I hope you
enjoy this review and found it a useful
insight into the building of the
Olliepede.
9.