OFFICE OF THE PRINCIPAL: GOVERNMENT POLYTECHNIC: MAYURBHANJ: TIKARPADA. (Camp office: P.C.I.T.I., Station Bazar, Baripada)Website: www.gpmayurbhanj.org.in Email id-principalgpmayurbhanj@gmail.com Tender Notice No- 122 /GPM, Dated the, Baripada, 11thMarch, 2016. The Principal, Government Polytechnic, Mayurbhanj, Tikarpada invites Sealed Tenders from various reputed Firms/ publishers/Distributors/Authorized Dealers/Agencies having valid TIN/ SRIN/ PAN for the followings(As detailed vide Package-A & Package-B).

Complete Bidding documents can only be downloaded from our website www.gpmayurbhanj.org.in and are required to be submitted along with the non-refundable bidding amount of Rs.1000.00 (Rupees One Thousand) only for each package in shape of demand draft from any Nationalised Bank in favour of “Principal, Government Polytechnic, Mayurbhanj, Tikarpada”, payable at Baripada. Further, the tender must be accompanied by the Earnest Money Deposit (EMD) or Bid Security @ 1%of the total quoted value in shape of demand draft or Bank Guarantee in Annexure-I(Enclosed) from any Nationalised Bank in favour of “Principal, Govt. Polytechnic Mayurbhanj, Tikarpada”, payable at Baripada with copies of valid VAT Clearance Certificate, Income Tax Clearance Certificate and other relevant documents of the bidder failing which the bid will liable for rejection. The EMD shall be refunded to all unsuccessful bidders within 07 (Seven) days from the finalisation of tender. In case of successful bidder the same will be refunded within 15(Fifteen) days after completion of his supply/work. The EMD as well as Bid Amount any other forms like Cash, personal cheque etc. will not be accepted & in such case the bid shall be summarily rejected. Further, Tender submitted without or insufficient Bid amount or EMD is also liable for rejection. Bidders of the outside state are required to submit Odisha VAT clearance certificate along with the valid ITCC from the competent authority.

The Bidders can submit their Sealed Tender by speed post/Registered post or can drop their bids in the sealed box kept in the Camp Office of the Principal, Government Polytechnic, Mayurbhanj, At-Purna Chandra Industrial Training Institute, Station Bazar, P.O.-Baripada, Dist.-Mayurbhanj (ODISHA), PIN-757001 during all working days from 12.03.2016 to 29.03.2016 during Office hours & upto 12.00 noon of 29.03.2016. The same will be opened at 4.00 P.M. on 29.03.2016 in the aforesaid camp office in presence of the Bidders or their authorized representatives who ever may be present. Tender received after due date and time will not be entertained and the authority shall not be held responsible for delay or missing of the tender during postal/any other transit. Tender by E-mail/Fax shall not be entertained. If the office happens to be closed on the date of receipt & opening of the tender specified; then the same will be received & opened on the next working day as per the scheduled time & venue. The Bidder should sign full in each page of Bid documents with seal as token of acceptance of all terms and conditions of tender. The purchaser and the supplier shall agree that the competent court at Baripada shall have the jurisdiction to try and decide anything between the parties and they may approach the competent court at Baripada, if required, at any time. Bidder can quote for any one or both the packages in duplicate (i.e. one original bid and other copy bid) package-wise. For different Bids separate packets should be used kept in one outer envelope superscribing the following:

Tender Notice No._122/GPM/Dt.11.03.2016 1-Tender for Supply of Library Books/Library Automation 2-Due Date and time of submission of the Tender_______ 3-Due date & time of opening of the tender----------- 4-Name & detailed address of the firm/agency with Contract Number----- Bidder’s seal & signature. Page 01 of 20

PACKAGE- A Library Books (approx. cost 10.00 lakh).

(REFER ANNEXURE-III FOR LIST OF BOOKS). TERMS & CONDITIONS 1. Flat Rate of discount on publisher’s price to be offered on all books. 2. Publisher’s Price list of books is to be submitted if printed price is not available on the book.

3. Books to be delivered on FOR basis free of transportation cost / delivery cost. 4. Validity of the offer should not be less than four months. 5. The Books must be of latest Editions. 6. Period of delivery after placement of order should be specified. 7. Any other charges not mentioned in the offer will not be considered for payment. 8. The tenderer should have up-to-date TIN/SRIN/PAN clearance certificates. 9. The tenderer should have to furnish his performance statement in supply of Library Books etc. in the Performance statement format in Annexure-II (Enclosed). 10. The annual turnover of the tenderer should be more than one Crore last year (Enclose proof). 11. Any other document, if required.

12. The Undersigned reserves the right to reject or accept any or all offers without assigning any reason thereof.

PACKAGE- B Library Automation on Turnkey basis

Job Description a) Asset Tagging. (Generation of code for each book and stock keeping unit) b) Compilation / inflow of all the book / journals in to the library data base software. c) Creation of terminal for the students & Librarian (Computer will be provided by the institute). d) Hands on Training for the Institute on the library management. e) Providing Library management software, Barcode printer (Reputed Brand) & Barcode scanner. f) Generating complete book database. g) Spare printer, Barcode scanner, Barcode Roll, Barcode ribbon.

TERMS & CONDITIONS 1. The total cost of the work on turnkey basis may be quoted.

2. The party has to provide warranty on the hardware &soft ware at least 1(One) year from the date of completion of the work.

3. The firm has to provide AMC on both hardware & soft ware after expiry of the warranty period. The cost of AMC should be stated for comparison.

4. Period of completion of work to be mentioned. Beyond the due date 1% of the quoted price will be deducted from the tendered price for each 7 days delay in completing the work.

5. Any other charges not mentioned in the offer will not be considered for payment. 6. The tenderer should have up-to-date VAT/IT clearance certificates. 7. The tenderer should furnish his performance statement in Annexure-II (Enclosed). 8. Any other document, if required.

The Undersigned reserves the right to reject or accept any or all offers without assigning any reason thereof.

Principal, Govt. Polytechnic, Mayurbhanj.

Bidder’s seal & signature. Page 02 of 20

GOVERNMENT POLYTECHNIC,MAYURBHANJ.

ANNEXURE-I BID SECURITY FORM

WHERE AS........................................ (Here in after called “the Bidder”) has submitted its bid

dated....................... (Date of submission of Bid) for the supply of/execute the award of contract.................................... (Name and/or description of goods/Works) (Herein after called “the Bid”).

KNOW ALL PEOPLE by these presents that, WE...................................................................... (name of bank)of...........................(name of country). Having our registered office at.............................(address of bank)(here in after called “the bank”), are bound unto..................................(name of purchaser )(herein after called “the purchaser”), in the sum of ..................................................................for which payment well and truly to be made to the said purchaser, the Bank binds itself, its successors, and assigns by these presents. Sealed with the Common Seal of the said Bank this...................day of ................2016. THE CONDITIONS of this obligation are:

1. If the Bidder (a) Withdraws its Bid during the period of bid validity specified by the Bidder on the Bid form or (b) Does not accept the correction of errors in accordance with the Quotation; or 2. If the Bidder, having been notified of the acceptance of its bid by the purchaser during the period of bid

validity: (a) Fails or refuses to execute the contract. We undertake to pay the Purchaser up to the above amount upon receipt of its first written demand, without the purchaser having to substantiate its demand, provided that in its demand the purchaser will note that the amount claimed by it is due to it, owing to the occurrence of one or both of the two conditions, specifying the occurred condition or conditions. This guarantee will remain in force up to and including Ninety (90) days after the period of the bid validity, and any demand in respect thereof should reach the Bank not later than the above date. .......................................... (Signature of the Bank) Note: The Bank guarantee (Submitted by Indian Bidder) should be executed on stamp paper in accordance with stamp Act. The stamp paper should be in the name of executing bank. Bidder’s seal & signature page 03 of 20

ANNEXURE-II GOVERNMENT POLYTECHNIC, MAYURBHANJ.

PERFORMANCE STATEMENT (In proof of eligibility of bidders for the period of last three years)

Order placed by the Organization with address.

Order no. & Date.

Value of Order. Date of completion of delivery/ execution of contract.

Remarks indicating reasons for late delivery/execution of contract, if any.

Bidder’s seal & signature page 04 of 20

ANNEXURE-III( PACKAGE-A)

CIVIL ENGINEERING

I MECHANICS OF MATERIAL

SL NO TITLE OF BOOK AUTHER PUBLISHER @ Rate REMARKS

1 Strength of Material R.Subramanian ------ Per No

2 Strength of material R.K RAJPUT ------ Per No

3 Engineering Mechanics & Strength of Materials S.Ramamrutham ------ Per No

4 Strength of Material R.S.KHURMI ------ Per No

5 Strength of Material Dr. Sadhu Singh ------ Per No

6 Mechanics of material H.C.HIBBLER ------ Per No

7 Engineering Mechanics & Strength of Materials R.K.BANSAL ------ Per No

7 Strength of Material G.H.RYDER ------ Per No

8 Element s of strength of materials. S.P. Timoshenko, D.H.Young ------ Per No

9 Strength of Material James Gere & Goodno ------ Per No

II FLUID MECHANICS & HYDRAULIC MACHINES

1 A Text Book of Hydraulics, Fluid Mechanics &Hydraulic machines R.S.KHURMI ------ Per No

2 Hydraulics and fluid Mechanics Abdulla Sheriff ------ Per No

3 Fluid Mechanics Modi & seth ------ Per No

4 Hydraulics, Fluid mechanics and Fluid machines S Ramamrutham ------ Per No

5 Fluid Mechanics and Machinery

R Berndtsson,CSP OJHA,P N Chandramouli ------ Per No

6 Fluid Mechanics R.K BANSAL ------ Per No

7 Fluid Mechanics RK RAJPUT ------ Per No

8 A Text Book on Hydraulics JAGDISH LAL ------ Per No

III SURVEY-1

1 Surveying and Leveling R.Subramanian ------ Per No

2 Surveying,Vol.-I,II&III Dr.B.C.Punmia. ------ Per No 3 Plane Surveying ALAK DE ------ Per No

4 A text Book of Surveying &Leveling R.Agor ------ Per No

5 Surveying & Leveling Hussain& Nagraj. ------ Per No

6 Surveying & Leveling N.N Basak. ------ Per No

7 Surveying & Leveling S.C Rangawalla; ------ Per No

8 Surveying & Leveling T.P. Kanetkar & S.V.Kulkarni ------ Per No

IV CIVIL ENGINEERING MATERIALS

1 Text Book of materials RANGAWALA ------ Per No Page- 05 of 20 2 Engineering materials R K Rajput ------ Per No

3 Building materials S.K.Basu& A.K.Ray ------ Per No

4 A Textbook of Material Science and Metallurgy O.P.Khanna ------ Per No

5 Material science& process S K Hazrachoudhry ------ Per No

6 Civil Engineering Materials ------ TTTI,CHANDIGA

RGH Per No

V CONSTRUCTION TECHNOLOGY

1 Building Construction S C Rangawala ------ Per No

2 A text book of Building Construction

R.S Despande and G.V.Vartak ------ Per No

3 A text book of Building Construction

S.P.Arora and S.P.Bindra ------ Per No

4 A text bookof Building construction S.K.Sharmaand B.K.Kaul ------ Per No

5 A text book of Building Construction G.J.Kulkarni ------ Per No

6 A text book of Building Construction Susil Kumar ------ Per No

7 A text book of Building Construction N.K.R. Moorthy ------ Per No

8 Construction Equipment its Planning and application verma & mahesh ------ Per No

9 Construction Technology for Civil Engineering Technicians P.L.Monkckton ------ Per No

VI ANALYSIS OF STRUCTURE

1 Theory of structure R.S.Khurmi ------ Per No

2 Structural Analysis I S.S. Bhavikatti ------ Per No

3 Theory of structure S.Rammrutham, ------ Per No

4 Analysis of Structures-Vol.I&II - V.N.Vazirani & M.M. Rathwani ------ Per No

5 Theory of structure Timeshenko and Young. ------ Per No

6 Intermediate Structural Analysis C.K.WANG ------ Per No

7 Basic Structural Analysis C.S.Reddy. ------ Per No

VII GEOTECHNICAL ENGINEERING

1 Principles of Geotechnical Engineering Braja M. Das ------ Per No

2 Geotechnical Engineering T.N.Ramamurthy&T.G.Sitaram ------ Per No

3 Soil Mechanics & Foundation Engineering Dr. B.C.Punmia ------ Per No

4 Soil Mechanics& Foundation Engineering Dr. K.R.Arora ------ Per No

5 Soil Mechanics& Foundation Engineering,Vol-I Dr. V.N.S. Murthy ------ Per No

6 Principle of Foundation Engineering Braja M. Das ------ Per No

7 Geotechnical Engineering Gulhati & Dutta ------ Per No

8 Basic And Applied Soil Mechanics Ranjan Gopal & A. S. R. Rao ------ Per No

VIII IRRIGATION ENGINEERING

1 Irrigation Engineering & Hydraulics Structures S.K.Garg ------ Per No

Page- 06 of 20

2 Introductory Irrigation Engineering Dr. B.C.Punmia, ------ Per No

3 Irrigation Engineering N.N.Basak. ------ Per No

4 Fundamentals of Irrigation Engineering Bharat Singh. ------ Per No

5 Irrigation Engineering R.K.Sharma&T.K.Sharma ------ Per No

6 Irrigation & Water Power Engineering Das and Saikia ------ Per No

IX WATER SUPPLY AND WASTE WATER ENGINEERING

1 Text book on water supply and sanitary engineering G.S.Birdie ------ Per No

2 Elements of Environmental Engineering K.N.Duggal ------ Per No

3 Environmental Engineering N.N Basak ------ Per No

4 Environmental Engineering A.K. Chatterjee ------ Per No

5 Water Supply Engineering S.K.Garg ------ Per No

6 Waste Water Disposal Engg. S.K.Garg ------ Per No

7 Public Health Engg. S.K.Hussain ------ Per No

8 CPHEEO manual Water supply

by Ministry of Urban Development,Govt. of India. ------ Per No

9

CPHEC Manual- Sewage & Sewage Treatment - by Ministry of Urban Development, Govt.of India.

by Ministry of Urban Development,Govt. of India. ------ Per No

X ESTIMATING & COST

EVALUATION – I

1 Estimating, Costing, specification &Valuation in Civil Engineering M.Chakraborty. ------ Per No

2 A text Book of Estimating & Costing D.Kohli &R.C Kohli ------ Per No

3 Estimating &Costing B.N.Dutta ------ Per No

4 Estimating &Costing Birdi &Ahuja ------ Per No

XI CONSTRUCTION MANAGEMENT

1 Professional construction Management Donald S Berry ------ Per No

2 Construction planning and management PS Gahlot & BM Dhir ------ Per No

3 Construction Management & account Harpalsingh

Tata McGraw Hill Per No

4 A management guide to PERT/ CPM

Ferdinand K Levy Ferdinand K Levy Per No

5 construction equipment and its management SC Sharma

Khanna Publishers Per No

6 Management and construction industry PP Dharwadker Per No

7 Construction Planning equipment and method

Robert L Peurifoy & willium b ledbetter Per No

8 Construction Management Practice VK Raina Tata McGraw Hill Per No Page-

07 of 20 9 Construction Management Roy Pilcher Per No

10 Construction Management and planning Sengupta & Guha

Tata McGraw Hill Per No

11 Construction of Structures management & works S.C. Rangwala Per No

12 Building, planning, designing and scheduling Gurucharan Singh Per No

13 Project planning by CPM & PERT B.C. Punmia & Khandelwal Per No

XII STRUCTURAL DESIGN

1 Reinforced Concrete Structures I.C.Syal &A.K. Goel. Per No

2 Reinforced Concrete Structures Pillai & Menon. Per No

3 Reinforced Concrete HJ Saha. Per No

4 Fundamentals of Reinforced Concrete N.C.Sinha,S.K.Roy Per No

5 Limit State Method (RCC Design ) A.K.Jain. Per No

6 Design of Steel Structures B.N.Duggal Per No

7 Design of Steel Structures S.S. Bhavikatti. Per No

8 Design of Steel Structures N. Subramanian. Per No

9 Elements of Steel & Timber Design Samal & Panigrahi. Per No

6 IS:456-2000 BIS Publication Per No

7 SP-16 BIS Publication Per No

XIII HIGHWAY ENGINEERING

1 A Text Book Of Transportation Engineering S.P.Chandola. Per No

2 Highway Engineering S.K.Khanna & C.E.G. Justo Per No

3 A course on Highway engineering S.P.Bindra. Per No

4 Highway Engineering Dr.N.K.Vaswani Per No

XIV CONCRETE TECHNOLOGY

Per No

1 Concrete technology M.L.Gambhir; Tata McGraw Hill. Per No

2 Concrete technology M.S Shetty,

S.Chand &Company Limited,New Delhi Per No

3

Concrete technology A.M.Neville ELBS Per No

4 Concrete Mix design Krishna Raju. Per No

5 Concrete technology A.M.Neville&J.J.Brook Per No

6 Concrete technology A R Santhakumar Per No

XV RAILWAY & BRIDGE ENGINEERING

1 A text book of transportation engineering N.L. Arora Per No

2 A text book of transportation engineering S.P.Chandola Per No

4 Roads, railways, bridges and tunnel engineering

B.L.GUPTA AND AMIT GUPTA Per No Page-

08 of 20 5 Roads, railways, bridges and tunnel Ahuja and Birdi Per No

engineering

6 Bridge Engineering S.P. Bindra Per No

7 A Text book of Railway Engineering - S.C.Sexena&S.P.Arora, Per No

8 Principles and practice of Bridge engineering S.P. BINDRA Per No

I

MECHANICAL ENGINEERING

THERMAL ENGINEERING

SL NO TITLE OF BOOK AUTHER PUBLISHER @ Rate

REMARKS

1 Engineering Thermodynamics P. Chattopadhyay ------ Per No

2 A text book of thermal Engineering Domkundwar ------ Per No

3 Engineering Thermodynamics, P K Nag ------ Per No

4 THERMAL ENGINEERING R.S.Khurmi ------ Per No

5 THERMAL ENGINEERING R.K.RAJPUT ------ Per No

6 THERMAL ENGINEERING Y.CENGEL ------ Per No

7 THERMAL ENGINEERING A.S.SARAO ------ Per No

8 THERMAL ENGINEERING E.RATHAKRISHANNA ------ Per No

9 THERMAL ENGINEERING D.S.KUMAR ------ Per No

10 THERMAL ENGINEERING Y.V.C RAO ------ Per No

11 THERMAL ENGINEERING P.L BALLENY ------ Per No

12 Thermal Engineering M Rathore , Mahesh ------ Per No

13 I.C. ENGINE & GAS TURBINE R. yadav

Per No

14

I.C. ENGINE & GAS TURBINE v. ganeshan

Per No

15

I.C. ENGINE & GAS TURBINE mathur & sharma

Per No

16

I.C. ENGINE I.C. Gupta

Per No

17

GASTURBINE Rogers

Per No

18

STEAM TABLE & CHARTS K.K.Ramalingam

Per No

19

STEAM TABLE & CHARTS R.S. Khurmi

Per No

20

HEAT TRANSFER J.p. Holman

Per No

II THEORY OF MACHINES

1 Theory of Machines R S Khurmi ------ Per No

2 Theory of Machines R K Rajput ------ Per No

3 Theory of Machines S R Rattan ------ Per No

4 Theory of machine THOMAS BEVAN ------ Per No

5 Theory of Machines P L Ballaney ------ Per No

III MANUFACTURING TECHNOLOGY

1 Work shop Technology Hazra Choudhary Vol.-I, Vol.-II ------ Per No

Page 09 of 20

2 Production Technology, Vol- I & II O.P. Khanna DHANPAT RAI Per No

3 Manufacturing Technology P. N. Rao, Vol.- I, Vol.- II ------ Per No

4 MANUFACTURING TECHNOLOGY P.C.SHARMA ------ Per No

5 Workshop technology, Vol- I & II B.S Raghuwanshi DHANPAT RAI Per No

6 Production Technology, R.K.JAIN ------ Per No

7 Manufacturing Technology A.K.GHOSH&MALLICK ------ Per No

8 Work shop Technology Part-I & II W.A.S Chapman ------ Per No

IV MACHINE DESIGN

1 A text book of Machine Design R.S. Khurmi & J.K. Gupta S.Chand Per No

2 A text book of Machine Design P.C. Sharma & D.K. Aggarwal

S.K Kataria & Sons Per No

3 Design of machine element V.B. Bhandari TMH Per No

4 MACHINE DESIGN P.KANHAiA Per No

5 Design data handbook S. Md. Jalaludeen Anuradha Publication Per No

6 MACHINE DESIGN Sigley

Per No V APPLIED THERMODYNAMICS

1 Refrigeration and air conditioning R.S. Khurmi S. Chand Per No

2 Refrigeration and air conditioning S.C. Domkundwara and Arora

Dhanpat Rai & Sons Per No

3 Refrigeration and air conditioning R.K.RAJPUT ------ Per No

4 MECHANICAL Vibration v.p.singh ------ Per No

5 HEAT TRANSFER R.K.RAJPUT ------ Per No

6 POWER PLANT ENGG. R.K.RAJPUT ------ Per No

7 HEAT TRANSFER P.K.NAG ------ Per No

8 POWER PLANT ENGG. S.C. Domkundwara and Arora ------ Per No

9 Refrigeration and air conditioning C.P Arora TMH Per No

10 Refrigeration & Psychometric chart sc jain,S.S. Banwait

Per No 11 Refrigeration & Psychometric chart R.s. Khurmi

Per No

Per No

Per No

VI

INDUSTRIAL ENGG.& QUALITY CONTROL

1 Industrial Engineering & Management O.P. Khanna

DHANPAT RaI Per No

2 Industrial Engg. & Production Management TELSANG S.Chand Per No

3 Statistical Quality Control M.MAHAJAN DHANPAT RAI Per No

VII AUTOMOBILE ENGG. Per No

1 Automobile Engineering R.B.Gupta Satya Prakashan Per No

2 Automobile Engineering Vol- I & II Dr Kirpal Singh Standard Publishers Per No

Page 10 of 20

3 Automobile Engineering C.P.Nakra Dhanpat Rai Publication Per No

4 Automotive Engine W.H.Course McGraw Hill Per No

5 Automobile Engineering G.B. Narang

Per No

6

Automobile Engineering R.K. Rajput

Per No

7

Automobile Engineering K.M. Gupta

Per No

VIII CAD& CAM 1 CAD& CAM Mikel P.Groover PEARSON Per No

2 CAD& CAM Dr. P.N. Rao TMH Per No

ELECTRICAL ENGINEERING

II BASIC ELECTRICAL ENGG. SL

NO TITLE OF BOOK AUTHER PUBLISHER @ Rate REMARK

S

1 BASIC ELECTRICAL ENGINEERING T.K.NAGSARKAR &M.S.SUKHIJA

OXFORD UNIVERSITY PRESS Per No

2 ABC OF ELECTRICAL ENGINEERING JAIN&JAIN DHANPAT RAI PUBLICATION Per No

3 FUNDAMENTAL OF ELECTRICAL ENGINEERING AND ELECTRONICS J.B GUPTA Per No

4 BASIC ELECTRICAL ENGINEERING V.N.MITTLE TMH PUBLICATION Per No

5 ELECTRICAL TECHNOLOGY EDWAR HUGHES PERSON EDUCATION,NEW DELHI Per No

6 BASIC ELECTRICAL ENGINEERING CHAKRABORTY MGRAW HILL Per No

7 BASIC ELECTRICAL ENGINEERING V.K.MEHETA,ROHIT MEHETA ----- Per No

A TEXT BOOK OF ELECTRICAL TECHNOLOGY VOL-I ----- Per No

8 A TEXT BOOK OF ELECTRICAL TECHNOLOGY VOL-II B.L.THERAJA&A.K.THERAJA ----- Per No

BASIC ELECTRICAL ENGG.

1 GROB'S BASIC ELECTRONICS MITCHEL E.SCHULTZ,10TH EDITION TATA MCGRAW HILL Per No

2 PRINCIPLE OF ELECTRONICS V.K MEHETA&ROHIT MEHTA S.CHAND &COMPANY LTD Per No

3 ELECTRONIC DEVICE & CIRCUIT THEORY ROBERT L.BOYLESTAD &LOUIS NASHELSKY PEARSON PUBLICATION Per No

4 ELECTRONICS DEVICES &CIRCUITS DAVID A.BELL OXFORD UNIVERSITY PRESS Per No

5 ELETRONIC CIRCUIT Dr.R.S.SIDHA S.CHAND & COMPANY LTD Per No

II Analog Electronics and OP-AMP

1 Electronics device & CIRCUIT Sanjeev Gupta Dhanpat ray publication Per No

III Circuit and Network Theory

1 CIRCUIT & NETWORKS A. Sudhakar & Shyam Mohan S Palli Tata McGraw Hill Per No

3 CIRCUIT THEORY A.CHAKRABRATY DHANPAT ROY Per No

4 CIRCUIT THEORY P.K SATPATHY TMH Per No

5 CIRCUIT THEORY S.GHOSH PHI Per No

6 A COURSE IN ELECTRICAL CKT &ANALYSIS Sony Gupta, DHANPATROY Per No

Page 11 of 20

7 CIRCUIT THEORY RAMESH BABU SCITECH Publication Pvt. Ltd. Per No

8 CIRCUIT THEORY S.K.BHATTACHARYA PEARSON Per No

9 NETWORK ANALYSIS & SYNTHESIS FRAKLIN F. KUA Per No

10 Circuit and Networks [For modules:- 1,3,4,5,7,8 and 9.] Sakhija & Nagsarkar ----- Per No

IV Elements of Mechanical Engineering

1 Thermal Engineering R. S. Khurmi ----- Per No

2 Hydraulics & Hydraulic M/Cs A. R. Basu ----- Per No

3 Thermal Engineering A. S. Sarad ----- Per No

4 Hydraulics & Hydraulic M/Cs R. K. Bansal ----- Per No

V Electrical Engineering Material

1 Electrical Engg. Material & Electronic components

K.B.Raina,S.K. Bhattacharya, T. Joneja S. K. Kataria & Sons Per No

2 Electrical Engineering Materials R.K.Shukla, Archana Singh Mc Graw Hill Per No

I ENERGY CONVERSION – I

2 Electrical Technology J.B.GUPTA KATARIA Per No

3 Electric Machine Ashfaq Husain DHANPAT RAY Per No

4 Electrical Machine S. K. Bhattarcharya DHANPAT RAY Per No

5 Electrical Machine V.K.MEHETA & ROHIT MEHETA S.CHAND Per No

6 Electrical Machine S.GHOSH PEARSON Per No

7 Electrical Machine P.S.BIMBRA KHANNA Per No

8 Electrical Machine NAGRATH &KOTHARI TMH Per No

9 A test of practical in electrical Engg. N.K.JAIN DHANPATRAI Per No

10 Testing maintenance and repair of electrical machine and equipment JAGGI Per No

II ELECTRICAL MEASUREMENT & MEASURING INSTRUMENTS

1 Electric Measurement and Measuring instruments A.K. Sawhney Dhanpat Per No

2

Electrical and Electronics Measuring instruments and Measurement J. B. Gupta KATARIA Per No

3 ELECTRONIC INSTRUMETATION & MEASUREMENT W.O.COPPER ----- Per No

4 Electrical Measurement and Measuring instruments

E.W. Golding & H Widdis ----- Per No

GENERATION TRANSMISSION & DISTRIBUTION

1 Electrical power V. K. Mehta SCHAND Per No

2 Power System Engineering D. P. Kothari TMH Per No

3 A course of electrical power system S. L. Uppal KHANNA Per No

4 Electrical power system C.L.WADHWA NEW AGE Per No

5 Electrical power S.N.SINGH PHI Per No Page 12 of 20 6 A course of electrical Power Sony Gupta, Bhat Nagar ----- Per No

III INSTRUMENTATION & CONTROL

1 Control System A. Ananda Kuamr PHI Per No

2 Control System Engg. NAGRATH &GOPAL NEW AGE Per No

3 Linear control system B.S.MANKEY KHANNA Per No

IV DIGITAL ELECTRONICS Per No

1 Digital Electronics MORRISH MENU PEARSON Per No

2 Digital Electronics R.k.gaour Dhanpat ray Per No

3 Fundamental of Digital Electronics Ananda Kumar PHI Per No

4 Digital Electronics – Principal & Application S. K. Mondal TMH Per No

5 Digital Electronics B. R. Gupta & V. Singhal S. K. Katteria Per No

6 Digital Electronics P. Raja Sci Tech Per No

IV POWER ELECTRONICS AND DRIVES

1 Power Electronics M. D. Singh and K.B Khanchandani TMH Per No

2 Power Electronics Dr. P. S. Bhimbhra Khanna Publisher Per No

3 Power Electronics M H Rashid PHI Per No

4 Power Electronics P C Sen TMH Per No

Power Electronics Hari babu SCITECH Publication Pvt. Ltd. Per No

5 Power Electronics N Mohan Willey (India) Per No

V MICROPROCESSOR & ITS INTERFACING

1 Micro processor and Inter facing Sunetra Choudhury & S. P. Chowdhury Scitec Per No

2 Micro processor and Micro controller S. K. Mandala TMH Per No

3 Fundamentals of Microprocessor & Micro Computers B.Ram, Danpatri Per No

4

Micro processor Architecture programming & Application with 8085 R.S Gaonkar Peneram Per No

II APPLIED ELECTRONICS AND CONTROL

1 Integrated Electronics, Analog and digital systems J MILIMAN,CHRISTIS C. Tata McGraw Hill Per No

2 Electronic Devices and Circuit Motor Shed PHI Per No

3 Electronic Devices and Circuits G. K. Mithal Kalyani Publishers Per No

4 Power Electronics Rashid PHI Per No

5 Digital circuits and system Doughlas V Hall Tata McGraw Hill Per No

6 Digital Electronics R K Gour Dhanpatrai Per No

7 Digital System Design MANO ----- Per No

8 Microprocessor Gaonkar ----- Per No

9 Microprocessor B. Ram Dhanpatrai Per No

10 Industrial Electronics Paul B. Zaber ----- Per No

11 Mechanical Measurement & Measuring Circuit S. Khedhar ----- Per No Page

13 of 20 12 Instrumentation Nakara Choudhary Tata McGraw Hill Per No

13 Industrial Electronics S. N. Biswas Dhanpatrai Per No

14 Mechanical and Industrial Measuring Circuit R. K. Jain Khanna Publishers Per No

15 Industrial Instrumentation Fibrace ----- Per No

16 Electrical and Electronic Instrumentation A. K. Sawhney Dhanpatrai Per No

17 Industrial Electronics G. K. Mithal Khanna Publishers Per No

18 Thyristors P. C. Sen ----- Per No

III ELECTRICAL TECHNOLOGY Per No

1 Electrical Technology, E. Hughes, ELBS Publications Per No

2 Electrical Technology, H Cotton, Pitman Publications Per No

IV SWITCH GEAR AND PROTECTIVE DEVICES

1 Principle of power system V.K.MEHETA S.CHAND Per No

2 Electrical power Soni, Gupta and Bhatnagar DHANPAT RAY Per No

3 Power system protection & switch gear Bhuvanesh Oza TMH Per No

4 Electrical power S. L. Uppal khanna Per No

5 Protection and Switchgear RAGHURAMAN SCITECH Publication Pvt. Ltd. Per No

V UTILIZATION OF ELECTRICAL ENERGY AND TRACTION

1 Utilization of Electrical Energy G. C. Garg Traction Khanna Per No

Utilization of Electrical Energy J. B. Gupta S K Kataria and Sons Per No

2 Utilization of Electrical Energy E. I. Taylor ----- Per No

3 A Text book on Power system ENGINEERING

SONY GUPTA BHATNAGAR DHANPATRAI Per No

VI ELECTRICAL INSTALLATION AND ESTIMATING Per No

1 Electrical Installation and Estimating Surjit Singh Dhanpatrai and sons Per No

2 A course in Electrical Installation, Estimating and costing J.B.GUPTA S K Kataria and Sons Per No

VII TESTING AND MAINTENANCE OF ELECTRICAL MACHINE

1

Installation Commissioning &Maintenance of Electrical Equipments Tarlok Singh S. K. Kataria & Sons, Per No

2

Testing Commissioning Operation and Maintenance of Electrical Equipments S Rao Khanna Publisher Per No

3 Hand book of Inspection, for all type of Electrical Instruments Er. R. N. Sahoo

Orissa Power Generationconsultants and services Per No

Page 14 of 20

METTALURGICAL ENGINEERING

SL NO TITLE OF BOOK AUTHER PUBLISHER @ Rate

REMARKS

I MINERAL DRESSING

1 Principle of Mineral Dressing Gaudin A. M Tata McGraw Hill Per No

2 Non – Ferrous Metallurgy H. S. Roy, Shridhar & Abrahom EWP Per No

3 Mineral Processing Technology B. A. Wills ----- Per No

4 Fundamentals of Mineral Dressing C.Mohapatra,JJTP,Bhubaneswar JJTP Per No

II FUELS AND REFRACTORIES

1 Refractories Cheisty ----- Per No

2 Refractories M. L. Mishra ----- Per No

3 Refractories Gill Christ ----- Per No

4 Fuels & Combustion Samir Sankar ----- Per No

5 Fuels Himus ----- Per No

III MATERIAL TESTING

1 Testing of Metallic Material Surya Narayan ----- Per No

2 Mechanical Metallurgy Deiter Tata McGraw Hill Per No

3 Introduction to Physical Metallurgy Avner Tata McGraw Hill Per No

4 X – ray diffraction BD Culity ----- Per No

5 Experimental Technique in Physical Metallurgy

V. T. Cherepis & A. K. Mallick ----- Per No

6 Mechanical Testing Of Engineering Materials C.Mohapatra JJTP,Bhubaneswar Per No

IV IRON MAKING

1 Iron & Steel (Vol-1) Basforth ----- Per No

2 Ferrous production Brick ----- Per No

3 Iron Making Tupkaray R. H Khanna Publications Per No

4 Iron Making Frier ----- Per No

5 Iron & Steel Making A. K. Biswas ----- Per No

6 Iron ore reduction E. R. Rogers ----- Per No

7 An introduction to physical chemistry of iron & steel making Ward ----- Per No

8 Blast Furnace Iron Making A. K. Biswas SBA Publications Per No

V PHYSICAL METALLURGY

1 Engineering Physical Metallurgy Laktin ----- Per No

2 Physical Metallurgy Reed Hill ----- Per No

3 Material Science and Engineering Raghavan Prentice Hall of India Pvt Ltd. Per No

Physical metallurgy AVNER Tata McGraw Hill Per No

4 Physical Metallurgy Smallman Per No

5 Introduction to Engineering Materials C.Mohapatra JJTP,Bhubaneswar Per No

VI

PRINCIPLES OF EXTRACTIVE METALLURGY

Page 15 of 20

1 Introduction to Chemical Metallurgy R. S. Parket ----- Per No

2 Extraction Metallurgy J. Newton ----- Per No

3 Principle of Extractive Metallurgy A. Ghosh & H. S. Roy ----- Per No

4 Metallurgy Thermodynamics R. H. Trupkary Khanna Publications Per No

VII MANUFACTURE OF SPONGE IRON AND FERRO ALLOYS

1 Sponge iron Production by Direct Reduction of Iron oxide Amit Chattergee PHI Per No

2 DRI Process and its relevance to India

S. Dasgupta, T. K. Ray & B. Ray

M. N. Dastur & companies Pvt Ltd Per No

3 DRI Process in Rotary kiln Alis Chalmers USA Per No

4 Production of Ferro alloys A. Riss, Y. Khodorrosky ----- Per No

5 Fundamentals of Sponge Iron making

C.Mohapatra & D. Patnaik JJTP BBSR Per No

VIII POWDER METALLURGY

1 Introduction to Powder Metallurgy A.K.Sinha Dhanpatrai Per No

2 Powder Metallurgy R.L.Sande & C.R.Sha Geore Newton Ltd. London Per No

3 Applied Metallurgy for Engineers Curton ----- Per No

4 Manufacturing Process Badman ----- Per No

IX

HEAT TRANSFER, FLUID FLOW & FURNACES

1 Elements of Fluid Mechanics V.C.Sheshadri & U. Patankar. ----- Per No

2 Heat Transfer Isa Chenkov, Oxipoka & Sukomel Mir Publishers Per No

3 Metallurgical Furnaces Krivandrim & Markov. Mir Publishers Per No

X HEAT TREATMENT OF METAL AND ALLOYS

1 Physical metallurgy Raghavan. ----- Per No

2

Physical Metallurgy for Engineers Clark & Varney. ----- Per No

3 Heat Treatment Rajan &Sharma ----- Per No

4 Physical Metallurgy Raghavan. ----- Per No

5 Practical Physical Metallurgy Surajbhan ----- Per No

6 Practical Physical Metallurgy Rawlings ----- Per No

7 Practical Heat Treatment Lakhtin. ----- Per No

XI STEEL MAKING

1 Steel Making R.H.Tupkary ----- Per No

2 Steel Making A.K.biswas ----- Per No

3 Manufacture of iron & Steel VoL II Basforth. ----- Per No

4 Elementary Metallurgy (Steel) Frier. ----- Per No

5 Metal Process engineering P.Polukrint ----- Per No Page 16 of 20 6 Steel Honeycomb ----- Per No

7 Steel Fedrick & Deca ----- Per No

8 CHEMESTRY BodsWorth ----- Per No

9 STEEL MAKING V. A. Kudrin ----- Per No

XII NON-FERROUS EXTRACTIVE METALLURGY

1

Non Ferrous Production Metallurgy Bray J.L. ----- Per No

2

Non-Ferrous Metallurgy of metal Dannis W.H. ----- Per No

4 Rare Metal Extraction W. D. Jamrack. ----- Per No

XIII FOUNDRY ENGINEERING 1 FOUNDRY TECHNOLOGY LAL ----- Per No

2 FOUNDRY TECHNOLOGY GOEL ----- Per No

3 FOUNDRY Salman and Simons. ----- Per No

4 Principle at Metal casting Heine and Rosenthal. ----- Per No

5 FOUNDRY TECHNOLOGY Raghu Vansi ----- Per No

XIV MECHANICAL METALLURGY

1 Mechanical metallurgy Dieter ----- Per No

4

Mechanical Treatment of metals R.N. Parkins. ----- Per No

5 Mechanical Testing of Materials C.Mohapatra, ----- Per No

XV METAL JOINING

1

Introduction to Powder Metallurgy A.K.SINHA ----- Per No

2 Powder Metallurgy by R.L.Sande & C.R.Sha

Published by Geore Newton Ltd. London. Per No

3

Applied Metallurgy 1or Engineers Curton. ----- Per No

4 Manufacturing Process BADMAN ----- Per No

5

The Metallurgy of Welding, razing and Soldering J.Lankaster. ----- Per No

6 Welding Technology O. P. Khanna. ----- Per No

7 Welding Technology Richard Little. ----- Per No

XVI

COROSSION AND ITS PREVENTION

1

Introduction to electrometallurgy and corrosion Saran & Narayan ----- Per No

2 Corrosion Engineering M.G. Fontana and Green. ----- Per No

3 Hand book of corrosion Uhlig ----- Per No

XVII ENVIRONMENT STUDIES

1 Textbook of Environmental studies, Erach Bharucha, #UGC ----- Per No

2 Fundamental concepts in Environmental Studies, D.D. Mishra, S.Chand & Co-Ltd, Per No

Page 17 of 20

Bidder’s seal & signature page 18 of 20

3 Text book of Environmental Studies K.Raghavan Nambiar, SCITECH Publication Pvt. Ltd. Per No

4 Environmental Engineering V.M.Domkundwar Dhanpat Rai & Co. Per No

5 Environmental Engineering & Safety B.K.Mohapatra. ----- Per No

XVIII ENTREPRENEURSHIP & MANAGEMENT

1 Industrial Engineering & Management O.P.Khanna ----- Per No

2 Entrepreneurship for Engineers B.Badhai ----- Per No

3 Principles & Practice of Management L.M.Prasad ----- Per No

4 Industrial Engineering & Management : Banga & Sharma ----- Per No

5 Mercantile Law N.D.Kapoor ----- Per No

6 Industrial Engineering & production Management M.Mahajan ----- Per No

PHYSICS

Sl No TITLE OF BOOK AUTHER PUBLISHER @ Rate REMARKS

1 TEXT BOOK OF +2 PHYSICS-VOL-1 &VOL-2 BARIK,DAS& SHARMA KALYANI PUBLISHERS Per No

2 ENGINEERING PHYSICS GAUR & GUPTA DHANPAT RAI& CO,NEW DELHI Per No

3 FUNDAMENTAL OF PHYSICS HALLIDAY,RESNICK & WALKER WILLEY TOPPAN PUBLISHERS Per No

4 ENGINEERING PHYSICS B.L.THERAJA S.CHAND PUBLISHERS Per No

5 MODERN PHYSICS R.MURUGESHAN S.CHAND PUBLISHERS Per No

6 FIBER OPTICS D.A HILL Per No

7 FUNDAMENTAL OF PHYSICS FOR +2 VOL-1&VOL-2

V.K MEHETA,ROHIT MEHETA S.CHAND PUBLISHERS Per No

8 ENGINEERING PRACTICAL PHYSICS S.PANIGRAHI,B.MALLICK S.PUBLISHER Per No

CHEMISTRY

Sl No TITLE OF BOOK AUTHER PUBLISHER @ Rate REMARKS

1 TEXT BOOK OF INTERMEDIATE CHEMISTRY PART-1 & PART-2 NANDA,DAS,SHARMA KALYANI PUBLISHERS Per No

2 ENGG.CHEMISTRY B.K.SHARMA KRISHNA PRAKASHAN MEDIA PVT.LTD Per No

3 ENVIRONMENTAL CHEMISTRY Dr.SUNAKAR PANDA Per No

4 ENGINEERING CHEMISTRY Y.R.SHARMA,P.MITRA KALYANI PUBLISHERS Per No

5 ENGINEERING CHEMISTRY JAIN&JAIN DHANPAT ROY AND SONS Per No

6 ENVIRONMENTAL CHEMISTRY A.K.DEY Per No

7 ENGG.CHEMISTRY R.K MOHAPATRA PHI Per No

8 PRACTICAL INTERMEDIATE CHEMISTRY Dr.BICHITRANANDA NANDA Dr.BICHITRANANDA NANDA Per No

9 ELEMENTARY EXPERIMENTAL CHEMISTRY Y.R.SHARMA,A.K.DAS

Y.R.SHARMA,A.K.DAS KALYANI PUBLISHERS Per No

MATHEMATICS

1 ELEMENT OF MATHEMATICS-VOL-1&VOL-2

ODISHA STATE BUREAU OF TEXT BOOK PREPARATION&PRODUCTION Per No

2 A TEXT BOOK OF ENGINEERING MATHEMATICS

Dr.CHITTARANJAN MALLICK&S.MALLICK KALYANI PUBLISHER Per No

3 A TEXT BOOK OF ENGINEERING MATHEMATICS KREIZIG WILLEY Per No

4 HIGHER ENGINEERING MATHEMATICS Dr.B.S.GREWAL khana publisher Per No

ENGG. MECHANICS

1 ENGINEERING MECHANICS A.R.BASU TMH PUBLICATION DELHI Per No

2 ENGINEERING MECHANICS BASUDEV BHATTACHARYA OXFORD UNIVERSITY PRESS Per No

3 TEXT BOOK OF ENGG.MECHANICS R.S KHURMI S.CHAND PUBLICATION Per No

4 APPLIED MECHANICS&STRENGTH OF MATERIAL I.B PRASAD Per No

5 ENGG.MECHANICS TIMOSHEENKO,YOUNG &RAO Per No

6 ENGG.MECHANICS BEER&JOHNSON Per No

COMPUTER APPLICATION

1 COMPUTER FUNDAMENTALS&PROGRAMMING IN ''C'' REEMA THAREJA OXFORD UNIVERSITY PRESS Per No Page

19 of 20 2 PROGRAMMING IN ANSI C A.N KAMTHANE PEARSON PUBLICATION Per No

Bidder’s seal & signature page 20 of 20

3 COMPUTER APPLICATION KALYANI PUBLICATION Per No

4 LET US C Y.KANETKAR BPB Per No

5 COMPUTER FUNDAMENTALS E.BALAGURUSWAMY TMH Per No

6 PROGRAMMING IN C SCHAUM'S OUT LINE SERIES Per No

7 COMPUTER FUNDAMENTALS P.K SINHA &PREETI SINHA Per No

8 PROGRAMMING IN C DENNIS RITCHIE Per No

9 Object Oriented programming C++ Balguru Swamy Per No

10 Object Oriented programming C++ Benugopal Per No

11 Object Oriented programming C++ Ashok Kamthane Per No

COMMUNICATIVE ENGLISH

1 COMMUNICATION SKILLS SANJAY KUMAR AND PUSPALATA OXFORD UNIVERSITY PRESS Per No

2 INVITATION TO ENGLISH,BOOK-1,(FOR +2 STUDENTS),(2012 EDITION) CSHE,ODISHA Per No

3 Communicative English-I ABHISEK & ARORA KALYANI PUBLISHERS Per No

4 COMMUNICATION SKILLS SaNJAY KUMAR AND PUSPALATA

OXFORD UNIVERSITY PRESS Per No

ENGINEERING DRAWING

1 MACHINE DRAWING BASUDEV BHATTACHARYA OXFORD UNIVERSITY PRESS Per No

2 A TEXT BOOK OF ENGINEERING DRAWING Dr.R.K.DHAWAN Per No

3 A TEXT BOOK OF ENGINEERING GRAPHICS &AUTO CAD K.VENUGOPAL Per No

4 A TEXT BOOK OF ENGINEERING DRAWING N.D.BHATT Per No

5 ENGINEERING DRAWING P.S.GILL Per No

6 A INTRODUCTION TO AUTO CAD-2012 GEORGE OMURA WILLEY INDIA PUBLISHERS Per No

7 Machine Drawing N.D. Bhatt Per No

WORKSHOP PRACTICE

1 WORKSHOP TECHNOLOGY S.K.HAJARA CHOUDHRAY

MEDIA PROMOTERS PUBLISHERS,NEW DELHI Per No

2 WORKSHOP TECHNOLOGY B.S.RAGHUBANSHI DHANPAT RAI & SONS,NEW DELHI Per No

3 WORKSHOP TECHNOLOGY H.S.BAWA TMH Per No

4 WORKSHOP FAMILIARIZATION E WILKINSON Per No

5 SHEET METAL SHOP PRACTICE BRUCE & MEYER Per No

6 WORKSHOP TECHNOLOGY R.S.KHURMI & J.K.GUPTA S.CHAND Per No

MATERIAL SCIENCE

1 Material science G.B. Narang Per No

2 Material science V. Rajendran Per No

3 Material science M.s. Vijaya Per No