OEM Manufactured Power Systems - unitedoilservices.com · a Oil & Gas OEM Partner Company Contact...
Transcript of OEM Manufactured Power Systems - unitedoilservices.com · a Oil & Gas OEM Partner Company Contact...
a Oil & Gas OEM Partner Company
Contact us for more information, with design requirementsOr for pricing at www.subcoe.com or [email protected]
SUBCOE is a specialized Manufacturer and Supplier of Oilfield Electrical Equipment for the Artificial Lift Industry. We focus on OEM product manufacturing and development for our customers including• Variable frequency drive systems, standard, low harmonic & active• Advanced power distribution systems including controls devices• Switchboards and Motor Control Centers (MCC)• In-house manufacture of electronics for monitoring & control• Skid manufacturing & integration of Customer owned components• Fully integrated power generation & distribution systems • Mechanical & Electrical design & prototyping capabilities
OEM Electronic Control Products• We build our own dedicated high temp controllers • CUBE Intelligent Motor Controllers for Direct On
Line starters (DOL) & Variable Frequency Drive (VFD) applications
• Backspin & Ground Fault Sensor & Relay• VFD Current Monitoring Relay, Harmonics Immune• RS 232/485 Converter & 12VDC PSU• VFD HMI & Data Logger
VFDs and Power Equipment • All SUBCOE products are designed & engineered
to meet specific applications & environments• 380VAC to 480VAC, 600VAC & MV VFD systems• NEMA 1, 3R & 4 VFD or IP rated electrical panels• Input (IEEE) harmonic & output sine wave filters • 600V to 5000V switchboards• MV VFD, switchgear and junction boxes• SUBCOE manufactures passive heat exchangers
Remote Application VFD Skid Packages• Variable frequency drive skids, 380V to 34kV• Fully autonomous control systems• PWM VFD options with 6, 12, 18 or 24 Pulses• Active Front End - Regenerative drives• Harsh environment duty, -40 to +60 DegC rating• Passive or air conditioned enclosures• ESP, PCP, Pump Jack & Industrial applications• Solar panel and battery powered VFD systems
for off-grid pumping
OEM Manufactured Power Systems
a Oil & Gas OEM Partner Company
Contact us for more information, with design requirementsOr for pricing at www.subcoe.com or [email protected]
SUBCOE is dedicated to exceeding the Control & Automation
needs of the ALS Industry
• In-house R&D and Manufacture
• Modular IP portfolio allowing for rapid development of products
• Common core devices with application specific CUBE controllers
• CUBE DOL (Direct On Line)
• For any across the line starter systems
• Full 3 Phase Voltage & Current Power Monitoring
• Built in Backspin detection
• CUBE VFD (Variable Frequency Drive)
• Monitors and Controls VFD Chassis Drives• Dedicated onboard DIO & AIO
• Digital Inputs and advanced control logic
• CUBE VFD HMI (Human Machine Interface)
• Monitors and Controls VFD Chassis Drives
• Multiple Serial Ports for DHT & Modbus Device
• Flexible Base Unit with Expansion Modules
• SUBCOE drive systems can control, operate monitor and report any electric motor application
• Operating Temperature Range -40C to +70C• High Contrast Backlit Display (4x20 LCD)• 200Mb memory for logging and trending• RS232 or RS485 ports (Modbus master/slave)• USB ports suitable for data downloading • Down Hole Tool Connectivity (RS232 / RS485)• Onboard High Intensity LED Status Lights
OEM Manufactured Control Systems
SUBCOE also manufactures:
• Reverse Rotation Relay & Shunt for ESP Backspin & Ground Fault Detection
• Voltage & Current Monitor (VAM) for accurate VFD Output Monitoring LV or MV at all Voltages & Frequencies
• Resonance Analyzer to establish the resonance point of long cable length ESP Wells
• 232/485 Comms Adapter & 24VDC PSU
a Oil & Gas OEM Partner Company
Contact us for more information, with design requirementsOr for pricing at www.subcoe.com or [email protected]
SUBCOE is proud to be a YASKAWA Factory Authorized Oil & Gas OEM
SUBCOE VFD’s have been exclusively powered by YASKAWA for 8 years
• SUBCOE stocks a range of YASKWA VFD Chassis
• Function seamlessly with SUBCOE CUBE Controllers
• Are inherently suitable for all forms of Artificial Lift
Rugged, Reliable & Easy to use
• Customized application firmware available to add ALS
features to standard factory HMI or SUBCOE CUBE
• SUBCOE manufactures with all series predominantly
P1000 (Pump), A1000 (Industrial PCP/SRP)
U1000 (AFE, Low Harmonic, Regenerative)
• Permanent Magnet Motor Capable
• Chassis made in USA / JAPAN
• Industry leader in VFD technology
• Industry leader for VFD reliability
• CUBE Controller significantly improves functionality• Backspin relay Modbus data gives motor voltage & frequency
• Ground fault actively measured through backspin system
• Pump release function with F/R and F/S/R/S
• Real time clock and logging of all events and user interaction
• 16 trending channels including down hole tool (DHT) data
• Auto restart with individual logic and timers by alarm type
• Connectivity with all mainstream down hole monitoring tools
• Very flexible speed control from current or DHT variables
YASKAWA Oil & Gas OEM Partner
SUBCOE provides repair & retrofit services, call us for details of how we
can help you with your new, repair or rehabilitation application
a Oil & Gas OEM Partner Company
Contact us for more information, with design requirementsOr for pricing at www.subcoe.com or [email protected]
SUBCOE is an OEM Manufacturer of Active Front End VFD Systems
Our proven MATRIX technology Low Harmonic EnerDRIVE has been extensively tested and meets
the power system quality guidelines of IEEE519. The advantages to using a SUBCOE AFE drive
include:
Low Harmonic VFD Systems
• Proven field performance in NEMA4 55C desert applications,
over 500 systems deployed
• EnerDRIVE AFE power system is more cost effective than the
components needed to operate an 18 pulse or filtered systems
that must include an extra cost phase shift transformer, filters or
both and must be installed and cabled together.
• EnerDRIVE AFE is substantially smaller than VFD with 18P
phase shift transformer or compliant filters so it will use
substantially less space than 18P or IEEE519 filtered system,
reducing well site preparation costs.
• EnerDRIVE AFE can be NEMA4, passive cooled, 18P or
IEEE519 filtered systems cannot.
• EnerDRIVE AFE is quicker & easier to install
• EnerDRIVE AFE has excellent harmonic mitigation of
<5% VTHD & <5% ITHD
60HP, 480V, 90% Speed, 80% Load
Summary:
Input Condition Vac Vthd Iac Ithd Rated (100% Speed & 100% Load) 476 1.8% 58 1.6% Reduced (90% Speed & 80% Load) 477 1.6% 43 4.5%
As shown, the U1000 adheres to stringent IEEE519 levels (full speed and full load) for the input supply side.