ODU F ORMULA SAE S TATUS U PDATE 2. Submitted Budget on November 2 nd Currently organizing for...
-
Upload
vernon-lyons -
Category
Documents
-
view
214 -
download
0
Transcript of ODU F ORMULA SAE S TATUS U PDATE 2. Submitted Budget on November 2 nd Currently organizing for...
ODU FORMULA SAE STATUS UPDATE 2
Company Logo
• Submitted Budget on November 2nd
• Currently organizing for fabrication phase• Addition of an Aero team
Management
Gantt Chart
SUSPENSION
Company Logo
• .625 X .035 4130 round steel tube• 3/8” Heim joints• Completely modeled• Jigging in progress• Heims have been ordered
• Wheels and tires have been processed
Control Arms
• Uprights have been modified considerably• Bracket from top to a point outside of the wheel• Control arms had to be modified to accept new upright design
Uprights
Suspension Design
• Designed to accommodatenew uprights and A-Armdesign
Rockers
• Redesigned to save weight
• Optimize motion ratios
CONTROLS TEAM
Company Logo
• Prototyped mechanical aspects of electronic shifting in the shop.• Designed the actuator mount in SolidWorks.• Compiled the order form for the actuator and actuator mount material.
Shifting
• Some issues have caused Pedal Assembly not to be finished• Throttle and clutch pedals will be thinner version of brake pedal• Order forms for steering have been completed and turned in
Pedal Assembly
ENGINE TEAM
INTAKE MANIFOLD
Mark Griffin and Aaron Kun Mu
Company Logo
• Q (Volumetric Flow Rate)• Range Tested: 350 to 3500 • RPM: Idle at 1300 rpm to 10000 rpm
Test Phase in Solidworks
- Currently Underway- Flange to Runner Transition Piece 3D Print - Foundry Fabrication
Production Phase
Production Phase
COOLING AND FUEL SYSTEM
Company Logo
• Finalized design choices for ordering parts for cooling and fuel systems
• Choices are based on needs, quality of products and budget considerations
• Radiator: Speedway Universal Ford / Mopar– 19” x 22” x 2.25”– 2 rows of coolant tubes– Highly efficient due to use of maximum fins
per Inch to increase air cooling surface area
– Cost effective at 129$• Fan: 14” Electric Fan
– 1500cfm• 3” x 9” over flow tank• Coolant hoses and associated
adapters
Cooling
• Completed Solid Works 3D design – design utilizes 2mm (to support welding) and 5052 aluminum to keep weight low.• To be donated by Bauer Compressors
• Finalized design choices and completed cost list for ordering parts• New Pressure gauge (0-100psi , Aeromotive)• Materials to fabricate a fuel filler neck and vent • PTFE SS Fuel hoses – chosen for its compatibility with high Octane fuels
• Durable, chemically and heat resistant• Blank fuel rail for fuel injection• Fuel cell safety foam – a modification in sloshing control from baffles
Fuel Cell
EXHAUST
Company Logo
• Exhaust redesigned to reduce losses and fix interface
• Order forms completed• Awaiting funding to
purchase parts
Exhaust Progress
• Fabrication• Wrap headers• Final Assembly
What’s Left