OD-7009 / OD-7010 OD-7009 / OD-7010 - Manelco,...
-
Upload
phungduong -
Category
Documents
-
view
223 -
download
0
Transcript of OD-7009 / OD-7010 OD-7009 / OD-7010 - Manelco,...
112
IP65 F
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent/tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
OD-7009 / OD-7010 OD-7009 / OD-7010
Wall/Ceiling Mount Light
2
OD-7009
OD-7010
113
COMPACT FLUORESCENTOrdering Code: 7009-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7009-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7010-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
COMPACT FLUORESCENTOrdering Code: 7010-0-3-438-XXTC-TEL Gx24q-4 2x42W (2x3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7009-0-2-493-XXTC-TSE E27 15W (900 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7010-0-2-496-XXTC-TSE E27 2x23W (2x1500 lm)
INCANDESCENTOrdering Code: 7009-0-2-111-XXA60 E27 60W (730 lm)
TUNGSTEN HALOGEN Ordering Code: 7010-0-2-242-XXQT32 E27 100W (1550 lm)
30
99 cd/KIm
7009-0-3-414-XX
30
85 cd/KIm
7009-0-3-423-XX
30
105 cd/KIm
7010-0-3-428-XX
30
87 cd/KIm
7010-0-3-438-XX
30
106cd/KIm
7009-0-2-111-XX
30
181 cd/KIm
7010-0-2-242-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high- pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For tungsten halogen / discharge lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For discharge lamp and B2 class for compact fluorescent lamps. Electronic superimposed ignitor from Vossloh Schwabe - Germany / ENEC approved. Ignition voltage 1.8-2.3kV 220-240V 50-60Hz. For 35W - 70W discharge lamp. Power factor correction for discharge lamp from Vossloh Schwabe - Germany or from Electronicon - Germany. ENEC approved. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Double silicone insulation ignition wire. Tinned copper condutor. Impulsive voltage 5kV. Connector in PA6.6 nickle-plated brass insert. 600V/24A. - 40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
114
IP65 F
2
OD-7011 / OD-7012 OD-7011 / OD-7012
Wall/Ceiling Mount Light
OD-7011
OD-7012
115
METAL HALIDEOrdering Code: 7012-0-3-711-XXHIE-CE E2770W (5900 lm)
HIGH PRESSURE SODIUMOrdering Code: 7012-0-3-611-XXHSE-1 E27 70W (6000 lm)
MERCURY VAPOUROrdering Code: 7012-0-3-511-XXHME E27 80W (4000 lm)
COMPACT FLUORESCENTOrdering Code: 7011-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7011-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7012-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
COMPACT FLUORESCENTOrdering Code: 7012-0-3-438-XXTC-TEL Gx24q-4 2x42W (2x3200 lm)
30
102 cd/KIm
7012-0-3-711-XX
30
56 cd/KIm
7011-0-3-414-XX
30
49 cd/KIm
7011-0-3-423-XX
30
70 cd/KIm
7012-0-3-428-XX
30
65 cd/KIm
7012-0-3-438-XX
E27 COMPACT FLUORESCENTOrdering Code: 7011-0-2-493-XXTC-TSE E27 15W (900 lm)
COMPACT FLUORESCENTOrdering Code: 7012-0-2-496-XXTC-TSE E27 2x23W (2x1500 lm)
INCANDESCENTOrdering Code: 7011-0-2-111-XXA60 E27 60W (730 lm)
TUNGSTEN HALOGENOrdering Code: 7012-0-2-242-XXQT32 E27 100W (1550 lm)
30
61 cd/KIm
7011-0-2-111-XX
30
114 cd/KIm
7012-0-2-242-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high- pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent/tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
116
IP65 F
2
OD-7013 / OD-7014 OD-7013 / OD-7014
Wall/Ceiling Mount Light
OD-7013
OD-7014
117
COMPACT FLUORESCENTOrdering Code: 7013-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7013-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7014-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
COMPACT FLUORESCENTOrdering Code: 7014-0-3-438-XXTC-TEL Gx24q-4 2x42W (2x3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7013-0-2-493-XXTC-TSE E27 15W (900 lm)
COMPACT FLUORESCENTOrdering Code: 7014-0-2-496-XXTC-TSE E27 2x23W (2x1500 lm)
INCANDESCENTOrdering Code: 7013-0-2-111-XXA60 E27 60W (730 lm)
TUNGSTEN HALOGENOrdering Code: 7014-0-2-242-XXQT32 E27 100W (1550 lm)
30
86 cd/KIm
7013-0-3-414-XX
30
74 cd/KIm
7013-0-3-423-XX
30
91 cd/KIm
7014-0-3-428-XX
30
94 cd/KIm
7013-0-2-111-XX
30
153 cd/KIm
7014-0-2-242-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent/tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
118
IP65 F
2
OD-7015 / OD-7016 OD-7015 / OD-7016
Wall/Ceiling Mount Light
OD-7015
OD-7016
119
COMPACT FLUORESCENTOrdering Code: 7015-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7015-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7016-0-3-424-XXTC-D G24d-3 26W (1800 lm)
COMPACT FLUORESCENTOrdering Code: 7016-0-3-436-XXTC-TEL Gx24q-4 42W (3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7015-0-2-493-XXTC-TSE E27 15W (900 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7016-0-2-495-XXTC-TSE E27 23W (1500 lm)
INCANDESCENTOrdering Code: 7015-0-2-111-XXA60 E27 60W (730 lm)
TUNGSTEN HALOGENOrdering Code: 7016-0-2-242-XXQT32 E27 100W (1550 lm)
30
47 cd/KIm
7015-0-3-423-XX
30
53 cd/KIm
7016-0-3-436-XX
30
66 cd/KIm
7015-0-2-111-XX
30
125 cd/KIm
7016-0-2-242-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent/tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
120
IP65 F
2
OD-7047 / OD-7017 OD-7047 / OD-7017
Wall/Ceiling Mount Light
OD-7047
OD-7017
265 125
121
COMPACT FLUORESCENTOrdering Code: 7047-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7047-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7017-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
COMPACT FLUORESCENTOrdering Code: 7017-0-3-438-XXTC-TEL Gx24q-4 2x42W (2x3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7047-0-2-493-XXTC-TSE E27 15W (900 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7017-0-2-496-XXTC-TSE E27 2x23W (2x1500 lm)
INCANDESCENTOrdering Code: 7047-0-2-111-XXA60 E27 60W (730 lm)
TUNGSTEN HALOGENOrdering Code: 7017-0-2-242-XXQT32 E27 100W (1550 lm)
30
86 cd/KIm
7047-0-3-414-XX
30
74 cd/KIm
7047-0-3-423-XX
30
91 cd/KIm
7017-0-3-428-XX
30
94 cd/KIm
7047-0-2-111-XX
30
153 cd/KIm
7017-0-2-242-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent/tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
122
IP65 F
2
OD-7037 / OD-7038 OD-7037 / OD-7038
Wall/Ceiling Mount Light
OD-7037
OD-7038
265 125
360 170
NEW ITEM
123
COMPACT FLUORESCENTOrdering Code: 7037-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7037-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7038-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
COMPACT FLUORESCENTOrdering Code: 7038-0-3-438-XXTC-TEL Gx24q-4 2x42W (2x3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7037-0-2-493-XXTC-TSE E27 15W (900 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7038-0-2-496-XXTC-TSE E27 2x23W (2x1500 lm)
INCANDESCENTOrdering Code: 7037-0-2-111-XXA60 E27 60W (730 lm)
TUNGSTEN HALOGENOrdering Code: 7038-0-2-242-XXQT32 E27 100W (1550 lm)
30
86 cd/KIm
7037-0-3-414-XX
30
74 cd/KIm
7037-0-3-423-XX
30
91 cd/KIm
7038-0-3-428-XX
30
94 cd/KIm
7037-0-2-111-XX
30
153 cd/KIm
7038-0-2-242-XX
NEW ITEM
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-3 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
124
IP65 F
2
OD-7021 / OD-7041 / OD-7021 / OD-7041 / OD-7042 / OD-7043 OD-7042 / OD-7043 Wall/Ceiling Mount Light
OD-7021OD-7021
OD-7041 OD-7041
OD-7042OD-7042
OD-7043OD-7043
125
COMPACT FLUORESCENTOrdering Code: 7021-0-3-415-XX7041-0-3-415-XX7042-0-3-415-XX7043-0-3-415-XXTC G23 2x11W (2x900 lm)
COMPACT FLUORESCENTOrdering Code: 7021-0-3-428-XX7041-0-3-428-XX7042-0-3-428-XX7043-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm) 30
105 cd/KIm
7021-0-3-428-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high- pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
126
IP65 F
2
OD-7023 OD-7023
Wall/Ceiling Mount Light
127
COMPACT FLUORESCENTOrdering Code: 7023-0-3-415-XXTC G23 2x11W (2x900 lm)
COMPACT FLUORESCENTOrdering Code: 7023-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
30
110 cd/KIm
7023-0-3-415-XX
30
82 cd/KIm
7023-0-3-428-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high- pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q-4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For discharge lamp and B2 class for compact fluorescent lamps. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
128
IP65 F
2
OD-7024 / OD-7032 OD-7024 / OD-7032
Wall/Ceiling Mount Light
OD-7024
OD-7032
129
COMPACT FLUORESCENTOrdering Code: 7024-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7024-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7024-0-3-424-XXTC-D G24d-3 26W (1800 lm)
COMPACT FLUORESCENTOrdering Code: 7032-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
COMPACT FLUORESCENTOrdering Code: 7032-0-3-438-XXTC-TEL Gx24q-4 2x42W (2x3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7032-0-2-496-XXTC-TSE E27 2x23W (2x1500 lm)
TUNGSTEN HALOGENOrdering Code: 7032-0-2-242-XXQT32 E27 100W (1550 lm)
30
101 cd/KIm
7024-0-3-423-XX
30
113 cd/KIm
7032-0-3-428-XX
30
100 cd/KIm
7032-0-6-438-XX
SPECIFICATION
CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1
Electrical protection class 1. IP65.
BODY: Housing and cover ring in corrosion resistant high-pressure
die-cast aluminium ADC12 alloy.
OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate
diffuser. with UV stabilized additive. Material from Bayer -
Germany or Teijin - Japan.
PROTECTION: Weather proof and durable silicone gasket.
Service temperature -40 to +200 C.
FASTENING: All external screw is in 316 stainless steel with silicone
grease dipping.
CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized
rubber grommet for H07RN-F cable 3G x1.0 Possible for
through wiring.
LAMP HOLDER: G23/G24d-2-3/Gx24q-4 holder in PBT phosphor bronze
contact from AAG Stucchi - Italy / ENEC approved. For
compact fluorescent lamp. T140 rating 2A-250V.
E27 ceramic nickle-coated contact from Vossloh Schwabe
- Germany / ENEC approved. For tungsten halogen lamp.
T270 rating 4/250/5kV.
CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC
approved. 230V 50Hz tw130. For discharge lamp and B2
class for compact fluorescent lamps.
High frequency electronic ballast from Vossloh Schwabe -
Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2
EEI class. For 4 pins compact fluorescent lamp.
WIRING: 1x0.75 tinned copper silicone rubber insulated cable from
CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C
service temperature. Connector in PA6.6 nickle-plated
brass insert. 600V/24A. -40 to +130 C service temperature.
Cross section 2.5mm. VDE approved. Wiring provided
with earth connection.
PAINTING: First Stage: Chromatization treatment, resistant to corrosive
and extreme environment.
Second Stage: Coated with UV stabilized polyester powder
in automatic chamber.
Third Stage: Baked in digital temperature control room at
200 C for 30 minutes.
AVAILABLE COLOR:
Black - RAL9005 (replace last 2 digits on ordering code with 01)
Graphite - RAL7016 (replace last 2 digits on ordering code with 02)
Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03)
Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04)
White - RAL9010 (replace last 2 digits on ordering code with 06)
130
IP65
F
2
OD-7033 / OD-7034 OD-7033 / OD-7034 Wall/Ceiling Mount Light
OD-7033
OD-7034
NEW FOR 2006 THIS IS PROVISION DATA ONLY.
ACTUAL DIMENSION AND LOOK
MAY DIFFER FROM THIS.
270
27
0
76
360
36
0
140
131
COMPACT FLUORESCENTOrdering Code: 7033-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7033-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7033-0-3-424-XXTC-D G24d-3 26W (1800 lm)
COMPACT FLUORESCENTOrdering Code: 7034-0-3-428-XXTC-D G24d-3 2x26W (2x1800 lm)
COMPACT FLUORESCENTOrdering Code: 7034-0-3-438-XXTC-TEL Gx24q-4 2x42W (2x3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7034-0-2-496-XXTC-TSE E27 2x23W (2x1500 lm)
TUNGSTEN HALOGENOrdering Code: 7034-0-2-242-XXQT32 E27 100W (1550 lm)
30
101 cd/KIm
7033-0-3-423-XX
30
113 cd/KIm
7034-0-3-428-XX
30
98 cd/KIm
7034-0-6-438-XX
NEW FOR 2006 THIS IS PROVISION DATA ONLY.ACTUAL DIMENSION AND LOOK MAY DIFFER FROM THIS.
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-2-3/Gx24q-4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For discharge lamp and B2 class for compact fluorescent lamps. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50-60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
132
IP65 F
2
OD-7035 / OD-7036 OD-7035 / OD-7036
Wall/Ceiling Mount Light
OD-7035
OD-7036
NEW FOR 2006 THIS IS PROVISION DATA ONLY.ACTUAL DIMENSION AND LOOK MAY DIFFER FROM THIS.
270
270
76
360
360
140
133
NEW FOR 2006 THIS IS PROVISION DATA ONLY.ACTUAL DIMENSION AND LOOK MAY DIFFER FROM THIS.
COMPACT FLUORESCENTOrdering Code: 7035-0-3-414-XXTC G23 2x9W (2x600 lm)
COMPACT FLUORESCENTOrdering Code: 7035-0-3-423-XXTC-D G24d-2 18W (1200 lm)
COMPACT FLUORESCENTOrdering Code: 7035-0-3-424-XXTC-D G24d-3 26W (1800 lm)
COMPACT FLUORESCENTOrdering Code: 7036-0-3-424-XXTC-D G24d-3 26W (1800 lm)
COMPACT FLUORESCENTOrdering Code: 7036-0-3-436-XXTC-TEL Gx24q-4 42W (3200 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7036-0-2-495-XXTC-TSE E27 23W (1500 lm)
TUNGSTEN HALOGENOrdering Code: 7036-0-2-242-XXQT32 E27 100W (1550 lm)
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high- pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-3 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
134
IP65 F
2
OD-7026 OD-7026
Wall/Ceiling Mount Light
135
COMPACT FLUORESCENTOrdering Code: 7026-0-3-415-XXTC G23 2x11W (2x900 lm)
COMPACT FLUORESCENTOrdering Code: 7026-0-3-424-XXTC-D G24d-3 26W (1800 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7026-0-2-495-XXTC-TSE E27 23W (1500 lm)
INCANDESCENTOrdering Code: 7026-0-2-111-XXA60 E27 60W (730 lm)
30
100 cd/KIm
7026-0-3-415-XX
136
IP65 F
2
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high- pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. LAMP HOLDER: G23/G24d-3 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR:Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
OD-7027 OD-7027
Wall/Ceiling Mount Light
137
COMPACT FLUORESCENTOrdering Code: 7027-0-3-415-XXTC G23 2x11W (2x900 lm)
COMPACT FLUORESCENTOrdering Code: 7027-0-3-424-XXTC-D G24d-3 26W (1800 lm)
E27 COMPACT FLUORESCENTOrdering Code: 7027-0-2-495-XXTC-TSE E27 23W (1500 lm)
INCANDESCENTOrdering Code: 7027-0-2-111-XXA60 E27 60W (730 lm)
30
100 cd/KIm
7027-0-3-415-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 and tested by UL Demko laboratory in Denmark. Electrical protection class 1. IP65. BODY: Housing and cover ring in corrosion resistant high- pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Self-extinguishing high impact resistant opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for t hrough wiring. LAMP HOLDER: G23/G24d-3 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class. WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
138
IP65 F
2
OD-7028 OD-7028
Wall/Ceiling Mount Light
139
COMPACT FLUORESCENTOrdering Code: 7028-0-3-415-XXTC G23 2x11W (2x900 lm)
COMPACT FLUORESCENTOrdering Code: 7028-0-3-424-XXTC-D G24d-3 26W (1800 lm)
30
112 cd/KIm
7028-0-3-415-XX
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 Electrical protection class 1. IP65. BODY: Cover plate in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. Housing in cast aluminium. OPTIC COVER: Self-extinguishing high impact resistant prismatic/opal polycarbonate diffuser. with UV stabilized additive. Material from Bayer - Germany or Teijin - Japan. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Protected by weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 LAMP HOLDER: Gx24d-2 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For tungsten halogen lamp. T270 rating 4/250/5kV. CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class.WIRING: 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
140
IP65 F
2
OD-7029 / OD-7030 OD-7029 / OD-7030
Wall/Ceiling Mount Light
OD-7029OD-7029
OD-7030 OD-7030
141
COMPACT FLUORESCENTOrdering Code: 7029-0-3-443-XX7030-0-3-443-XXTC-T Gx24d-2 18W (1200 lm)
TUNGSTEN HALOGENOrdering Code: 7029-0-2-241-XX7030-0-2-241-XXQT32 E27 60W (840 lm)
SPECIFICATION CONSTRUCTION: Fixture is manufactured in compliance with IEC 60598-1 Electrical protection class 1. IP66. BODY: Housing and cover ring in corrosion resistant high-pressure die-cast aluminium ADC12 alloy. OPTIC COVER: Impact resistant frost prismatic safety tempered glass. Able to stand sudden change in temperature of up to 250 C. PROTECTION: Weather proof and durable silicone gasket. Service temperature -40 to +200 C. FASTENING: All external screw is in 316 stainless steel with silicone grease dipping. CABLE ENTRY: Two IP67 M20 brass nickle cable gland for H07RN-F cable 3G x1.5 Possible for through wiring. LAMP HOLDER: G12 holder in ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For discharge lamp. T270 rating 4/250/5kV. G24d-3/Gx24q-4 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A- 250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For tungsten halogen lamp. T270 rating 4/250/5kV.CONTROL GEAR: Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For discharge lamp and B2 class for compact fluorescent lamps. Electronic superimposed ignitor with automatic switch-off feature from Vossloh Schwabe - Germany / ENEC approved. Ignition voltage 4-5kV 220-240V 50-60Hz. For ceramic/quartz discharge lamp. Power factor correction for discharge lamp from Vossloh Schwabe - Germany or from Electronicon - Germany. ENEC approved. High frequency electronic ballast from Vossloh Schwabe - Germany / ENEC approved. 220-240V 0-50- 60Hz tc70 A2 EEI class. For 4 pins compact fluorescent lamp.WIRING: 1x0.75 silicone rubber insulated cable with fiberglass braid from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. Double silicone insulation ignition wire. Tinned copper condutor. Impulsive voltage 5kV. Connector in glass-fiber reinforced PA6.6 from BM - Italy / ENEC approved. Service temperature up to 200 C. Cross section 4mm. Rating 4A/400V. Wiring provided with earth connection.PAINTING: First Stage: Chromatization treatment, resistant to corrosive and extreme environment. Second Stage: Coated with UV stabilized polyester powder in automatic chamber. Third Stage: Baked in digital temperature control room at 200 C for 30 minutes.
AVAILABLE COLOR: Black - RAL9005 (replace last 2 digits on ordering code with 01) Graphite - RAL7016 (replace last 2 digits on ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits on ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits on ordering code with 04) White - RAL9010 (replace last 2 digits on ordering code with 06)
142
IP66 F
2
OD-7051 OD-7051
Robust Wall/Ceiling Mount Light
NEW FOR 2006 THIS IS PROVISION DATA ONLY.ACTUAL DIMENSION AND LOOK MAY DIFFER FROM THIS.
254
138
295
143
METAL HALIDEOrdering Code: 7051-0-3-751-XXHIT-CE G12 35W (3300 lm)
COMPACT FLUORESCENTOrdering Code: 7051-0-3-436-XXTC-TEL Gx24q-4 42W (3200 lm)
COMPACT FLUORESCENTOrdering Code: 7051-0-3-424-XXTC-D G24d-3 26W (1800 lm)
TUNGSTEN HALOGENOrdering Code: 7051-0-2-242-XXQT32 E27 100W (1550 lm)
NEW FOR 2006 THIS IS PROVISION DATA ONLY.ACTUAL DIMENSION AND LOOK MAY DIFFER FROM THIS.