Oct. 1st - Dec. 31st, 2019 SHOP NOW INSCO · Magnetic Nut Driver Set- Cushion Grip Handles 646M-KLN...

Global® AmRad®

Turbo200 & TES5 2-Pack CapacitorCPT200-GTS

This is the most universal capacitor set you can buy. This pairing allows for micro-farad coverage from a lowly 2.5mfds up to 324mfds and many, many in-between. Nev-er have to make a second trip to the parts store with this two pack of capacitors.

Global® AmRad®

Turbo200X & TES5 2-Pack CapacitorCPT200X-GTS

This is the most universal capacitor set you can buy. This pairing allows for micro-farad coverage from a lowly 2.5mfds up to 324mfds and many, many in-between. Nev-er have to make a second trip to the parts store with this two pack of capacitors.

Mueller®

36” 1/2” M x 1/2” M Stainless Steel Gas ConnectorG012SS101036-MUE

• Reduces the need for fi ttings• Quick and easy installation• Neck free design for maximum

bending fl exibility• Corrugated stainless steel design is fl exible to

accommodate changes in construction specs• 100% leak tested for quality assurance

Fresh-Aire®

UV247™ UV Light SystemUV24-TEI

The UV247™ is the easy way to add germ-killing UV light to any central air sys-tem. The kit includes everything you need.Just connect to a low voltage transformer and install the UV light where needed. By reducing mold growth inside the HVAC system UV247 saves energy and reduces the need for system maintenance.

FEATURED New Products Instruments & Tools Closeouts

INSCO.COMOct. 1st - Dec. 31st, 2019 SHOP NOW INSCO.COM

NEW

NEW

NEW

NEW

Inventory and images may vary. While supplies last.

Order easier! Text-to-Order now available at all branches.Use your branch’s phone number to text in any order.

add a reme halo to my order

Insco

Your message has been received

John has read your message

John: Everything is ready to go

8:45am

8:46am

8:48am

8:58am

Thx. That was easy!9:00am

/ 1 NEW PRODUCTS

Mueller®

Gas Ball Valve110-223HC-MUE - 1/2” Handle110-224HC-MUE - 3/4” Handle

• 200 PSI, 20° - 300° range• Quarter-turn lever handle for positive on/off

operation• Coated aluminum handle for corrosion and

solvent resistance• Multi-directional fl ow• Two-piece body design• Chrome-plated brass ball

Mueller®

48” 5/8” OD x 1/2” ID Stainless Steel Gas Connector w/ValveG012YE103348

• Yellow epoxy coated• Reduces the need for fi ttings• Quick and easy installation• Neck free design for maximum



ProLine®

1/2” FLX x 1/2” MIP BrassGas ConnectorG038-10-MUE

• Zinc-plated steel S45C• Does not leak within tightened torque of

1,040 inch-pounds

Mueller®

1/2” MIP x 1/2” FIP Stainless Steel Gas ConnectorG038YE101118-MUE - 18”G038YE101124-MUE - 24”G038YE101136-MUE - 36”



accommodate changes in construction specs

Mueller®

36” 1/2” MIP x 1/2” MIP Stainless Steel Gas ConnectorG012YE101036-MUE




/ 2 NEW PRODUCTS

NEW

NEW

NEW

NEW

NEW

Bundle & Save!With a Mitsubishi Mini-Split Kit

New 16 SEER Systems Include Indoor & Outdoor Units with Pad, Cover Guard Kit, Wire & Line set

$962Starting at

BTU Voltage Outdoor Indoor 25’ Lineset 50’ Lineset

9,000 208/230 MUZ-WR09NA-U1 MSZ-WR09NA-U1 $962 $1,015

12,000 208/230 MUZ-WR12NA-U1 MSZ-WR12NA-U1 $1,072 $1,125



BTU Voltage Outdoor Indoor 25’ Lineset 50’ Lineset

9,000 115 MUZ-JP09WA-U1 MSZ-JP09WA-U1 $1,069 $1,122

12,000 115 MUZ-JP12WA-U1 MSZ-JP12WA-U1 $1,162 $1,215

REFRIGERANT RECLAIM PROGRAM | OVER 15,000 ITEMS IN-STOCK | EQUIPMENT FLOOR PLANS | REWARDS PROGRAMS | INCENTIVE TRIPS

VISIT INSCO.COM/TRAINING For Complete Course Listings

t 30+ Unique Courses - We offer a wide variety of courses from Airflow Fundamentals to Zoning.

t Continuing Education Credits Available - NATE & TDLR credits are available on most classes.

t 100+ Years of Combined Experience - Our training staff are factory certified and have over 100 years of combined experience.

t 4 State-of-the-Art Training Centers - With working Ruud, York and Mitsubishi Electric equipment.

t Live, Working Equipment - Hands-on training that properly prepares you for service in the field.

/ 5 TOOLS

Receive double Tool Buck redemptions on every item in the Tools Section of this product guide.

$50

$50

$50

$50

$50

$50

$50

$50

$50

$50

EARN PUNCHES. SAVE MONEY!Earn 1 punch per every $50 spent

on qualifying purchases*

Technician Tool Bucks

*Restrictions apply. Expires 12/31/19. See reverse for complete details.

10001

$10 OFFYour next tool purchase upon completion.

Introducing

Insco Tool Days Every Tuesday

MARKETING SUPPORT | DEDICATED SALES TEAM | FACTORY CERTIFIED TECHNICAL SUPPORT | 24/7 EMERGENCY BRANCH OPENING

Fieldpiece®

Knife Style Pocket ThermometerSPK2-FIIThe newly designed SPK2 Folding Pocket Thermometer is great for taking quick air temperatures. It fi ts directly in your pocket so you’re ready for common temperature checking. The folding rod has a hanging hook so you can easily hang it in a duct or on a grille. The large display shows Min/Max/Hold, has measurements in both Fahrenheit and Celsius, and has a low battery indicator. It also quickly calculates T1-T2, as well as features an Auto Power Off function to save battery power.

Fieldpiece®

Micron Vacuum GaugeSVG3-FII

The SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVACR professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberized case, and a hook n the top that allows it to be hung at any angle.

Fieldpiece®

Refrigerant ScaleSRS1-FII

The SRS1 refrigerant scale is big enough to comfortably fi t a canister, but compact and light weight enough to carry easily. Up to 110 pound capacity. Thick aluminum walls to maintain accuracy, and rubber pad & feet to soften the impact of daily use offer great durability for the HVAC industry.

Fieldpiece®

Classic Style Digital Multimeter2960662

This manual ranger covers the parameters and ranges you need for most HVACR applications. The LT17A meter measures current, resistance, voltage, capacitance, frequency, continuity and temperature. Test leads store in the meter body and, with the probe tips removed, connect to any Fieldpiece accessory head. The body is made out of durable ABS plastic and comes with a bright blue backlight for poorly lit test areas.

Fieldpiece®

Dual In-Duct PsychrometerSDP2-FII

The SDP2 Dual In-Duct Psychrometer is more than just your everyday HVACR psychrometer. It gives HVACR professionals more insight into HVAC evaporator performance than any other psychrometer, because it takes four evaporator measurements at one time: supply wet bulb, sup-ply dry bulb, return wet bulb, and return dry bulb.

Fieldpiece®

Essential Clamp Meter w/ True RMS MagnetSC440-FII

The mid-size essential clamp meter has virtually every parameter for electrical and thermal HVAC/R testing in one meter. This auto and manual ranger includes a host of safety features including a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder with detachable leads, and alligator probe tips for easy one-handed testing.

Yellow Jacket®

60” x 1/4” Plus II™ Hoses29985 - 3pk.

• Full flow valve• Uses standard gasket and valve opener• UL recognized assemblies (File SA9737)• Rated for 4000 psi minimum burst and

800 psi maximum working pressure• Operating temperature of -20° to 180°F• Minimum bending radius: 6″• Made in the USA

Fieldpiece®

Wireless 3-Port SMAN™ RefrigerantManifold and Micron GaugeSM380V-FIIYears of feedback from HVAC/R specialists is combined with Fieldpiece’s laser focus on continuous improvement to bring you the toughest, most advanced digital refrigerant manifold on the market. From the extremely rugged overmold casing, reinforced hook, and hermetically sealed sight glass, to the wireless capabilities, data logging, and tightness test, the SM380V is built so you can do your job easier, faster and better.

Fieldpiece®

Wireless 4-Port SMAN™ RefrigerantManifold and Micron GaugeSM480V-FIIYears of feedback from HVAC/R specialists is combined with Fieldpiece’s laser focus on continuous improvement to bring you the toughest, most advanced digital refrigerant manifold on the market. From the extremely rugged overmold casing, reinforced hook, and hermetically sealed sight glass, to the wireless capabilities, data logging, and tightness test, the SM380V is built so you can do your job easier, faster and better.

Cliplight®

Multi-Functioning LED Work Light24-460-CLP - Camo24-458-CLP - Yellow

• 28 LED faced worklight• 5 LED top flashlight• 360° swivel hook• Magnetic base• 3 AA batteries included

Klein Tools®

11-in-1 Screwdriver Nut Driver with Schrader® Bit32527-KLN• Versatile 11-in-1 tool• Includes unique style bit for installation/

removal of common TR-4 Schrader® valves and aggressive thread extractor tip for backing out broken cores

• Blast finish bit tips provide a firm hold and reduce cam out

/ 6 TOOLS / 7 TOOLS

SALES SUPPORT TEAM (SST) | CERTIFIED CLASSROOM TRAINING | PARTS CONSIGNMENT FLOOR PLANS | FREE DELIVERY | COMMERCIAL QUOTING

Malco®

Scratch Awl5150024

Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, even light gauge metal. Blades are high carbon, alloy tool steel fully polished to resist rust. Blade tapers to a fi ne point and may be resharp-ened many times. Easy-to-spot orange handles are shock and shatter resistant. Shallow fl uted handles with large end bearing surface provide a sure, comfortable grip. User has choice of large diameter or regular grip handles.

Channellock®

Adjustable Wrench1811318 - 8”1811323 - 10”

Channellock adjustable wrenches have and endless amount of uses. Strong, reliable and versatile-it’s exactly what America has come to ex-pect from Channellock. With Code Blue® handles for durability and comfort.

Channellock®

7” Lap Joint Cutting Plier1810540

Not all cutting edges are the same. Only Channellock uses precision machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life. The Channellock knife and anvil cutters ensure proper cutting edge alignment, resulting in a clean cut every time. Most manufacturers use two sharp edges which can become misaligned, losing their cutting effec-tiveness. Experience the difference for yourself.

Klein Tools®

All-Purpose Pliers with CrimperJ207-8CR-KLN

• Strips, cuts, loops, crimps and shears• Strips 10-18 AWG Solid and 12-20 AWG

Stranded wire• 6-32 and 8-32 screw shearing• Crimps non-insulated connectors, lugs

and terminals• Dual material Journeyman™ handles

provide better grip• Long nose for extended reach, grabbing

and looping wire

Klein Tools®

Magnetic Nut Driver Set- Cushion Grip Handles646M-KLN

• Includes 1/4 in and 5/16 in hex size nut drivers

• Nut driver has hollow shaft withrare-earth magnetic tip

• Cushion grip handle offers greatcomfort and torque

Klein Tools®

25 ft. Double-Hook MagneticTape Measure86225-KLN• 25 ft tape measure has easy-to-read

bold lines markings• Double magnetic hooks attach to con-

duit for precise measurement• Blade has nylon coating to safeguard

the printings

Klein Tools®

Wireless Bluetooth SpeakerAEPJS1-KLN• 32.8-foot connectivity range• 10-Hour battery life• Drop protected up to 6.6-foot• Powerful rear magnet holds speaker

to metal surfaces (panels, ducts, etc.)

CPS® ABM EasyHOOD®

Airfl ow HoodABM-HOOD-200-AAB

The ABM EasyHood works with the ABM-100 or ABM-200 to turn the ABM meter into a powerful airfl ow capture hood. Using your smartphone as a display, the ABM EasyHood takes real-time airfl ow readings in a matter of seconds at a fraction of the cost compared to traditional hoods.

/ 8 TOOLS

Simply Smart—Bosch Inverter Drive Air-to-Air Heat Pump Systems

18.5Up to

56As low as

SEER dBA Sound

t 18 SEER/9.5 HSFP—High-Efficiency Inverter Driven System Delivers Up to 18.5 SEER Providing Unparalleled Comfort and Cost Savings

t Fully-Modulating Inverter Drive—Variable Speed From 25% to 110%, in 1% Increments

t 2 Condensing Units—3 ton and 5 ton

t 4 Air Handler Units—2, 3, 4, & 5 ton

t 10-Year Residential Limited Warranty

t No Special Thermostat Required

t Low Amp Start-Up—No Locked Rotor Amp

t Simple Retrofit Installation—Requires 4 Wires to Condenser & AH, Suction Line Sizing

t 56 dBA—One of the Quietest and Most Com-pact Air-To-Air Systems with Sound Levels as Low as 56 dBA

t Electric Heat—Available as a Field Installed Option

Hot New Pricing on Cost Competitive 14 SEER Air Conditioners

PLAN & SPEC TAKE-OFFS | DUCT BOARD FABRICATION MACHINES | CUSTOMER DEFINED PART NUMBERS | FLEXIBLE CREDIT OPTIONS

Bacharach®

Refrigerant Leak Detector3015-8004-BTS - H-10 PROThe H-10 PRO is ultra-sensitive to all halogen-based, non-fl ammable CFC, HFC and HCFC refrigerants for reliable use in a wide range of refrigerant leak detection applications. The H-10 PRO has a long probe for detecting leaks in hard-to-reach areas, visual and audible indicators to show relative leak sizes and an auto-zeroing feature for fi nding leaks in backgrounds where target gas is present. It has an internal sensor calibration reference to ensure optimum performance.

JB Industries®

Platinum® 2-Stage Vacuum PumpDV-285N-JBI - 10CFMThe best pump in the industry. Designed for the serious air conditioning and refrigeration technician, the Platinum® vacuum pump features a gas ballast and blank off valve. American made and subjected to JB’s rigorous performance standards, this pump is the top of the line for both quality and durability. Featuring direct-drive technology.

Veto Pro Pac®

Closed Top Tool BagMC-VPPThe MC allows technicians and contractors the ability to set up multiple job specifi c bags that can also feed out of our LC, XL or XXL-F size bags. The MC holds plenty of essential tools for different types of work and is convenient enough to carry everywhere and get into tight spaces.

Veto Pro Pac®

Leather Backed Tool PouchMP1-VPPThe MP1 is a compact tool pouch with a leather “Pocket Pad” to slip into your back pocket for a quick and easy carry. It also has a “Fold-Over” leather belt loop with snap for a more permanent connection and comes with a stainless steel metal tape measure clip.

Ulmer®

Fan Blade Puller8425000• Patented all steel contruction• Chrome molybdenum drive shaft• Ball bearing drive shaft for protection

of shaft tip• Has special line-up holes that line

up the tool on the fan hum to make shaft line-up easy

• Will accept 5” shaft overhang• Pushes shaft completely out of hub

• Durable Construction

• Quiet Operation

• Efficient Performance

• 5 Year Parts Warranty

$615Starting at

WA1418AJ1NA

Size Model Price

1.5 Ton WA1418AJ1NA $615

2.0 Ton WA1424CJ1NA $635

2.5 Ton WA1430BJ1NA $690

3.0 Ton WA1436BJ1NA $705

3.5 Ton WA1442BJ1NA $791

4.0 Ton WA1448BJ1NA $922

5.0 Ton WA1460AJ1NA $1,098

Dormont®

5/8” OD, 1/2” ID Stainless Steel Gas Connector Flare-Flare Male-Male2280012 - 12”2280018- 18”2280024- 24”2280030 - 30”2280036 - 36”2280048- 48”

This durable, corrosion resistant stainless steel gas connector is confi gured with 1/2” MIP x 1/2” MIP adapters. Designed with safety in mind, this CSA approved gas connector is yellow coated.

Dormont®

5/8” OD, 1/2” ID Stainless Steel Gas Connector Flare-Flare Male-Male2280550 - 24”2280562 - 36”2280566 - 48”

This 5/8 inch OD, 1/2 inch ID, durable, corro-sion-resistant stainless steel gas connector is confi gured with 1/2 inch MIP x 1/2 inch MIP adapters and is 24 inches in length. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and gas furnaces.

Smart Electric®

Liquid Line Filter Drier 3/8”SK083S - 8 cu. in.SK163S - 16 cu. in• Protects systems from harmful moisture,

acids, and solid particles• Solid core drier with 80% 3A molecular sieve

with 20% activated alumina; perfect for systems operating at high condensing tem-peratures and requiring high drying capacity

• Corrosion resistant shell with copper stubs is UL approved

• Maximum working pressure up to 610 PSIG

Smart Electric®

Solid Core Bi-Directional Heat Pump Drier 3/8” SolderSBD163S

• Includes internal check valve which• allows fl ow and fi ltration in both directions• Epoxy powder paint• 680 PSIG• Bursting pressure 3400 PSIG• Effectively removes moisture, acid

and solid contaminants• Copper ends

Sporlan®

Liquid Line Filter Drier 3/8”2SS3S-SPO - 1/2 to 2 tons3SS3S-SPO - 1 to 3 tons5SS3S-SPO - 2 to 5 tons• Steel construction• R-22 & R-410A compatible• Single core• 100 Percent Molecular Sieve• Solid Core• Rated 650 PSIG

Mill-Rose®

Tube Brush7000024 - 1/2”7000032 - 5/8”7000040 - 3/4”7000064 - 1 1/8”7000072 - 1 3/8”7000088 - 1 5/8”

Mill-Rose standard and heavy duty plumbing and refrigeration brushes ar the fi rst choice in price and quality. Features include heavy-gauge galvanized stem wire and single stem, sin-gle-spiral construction as well as double stem, double spiral construction.

Mill-Rose®

Maroon 4x6” Abrasive Pad70199-MRC

Premium quality hand pad for aggressive cleaning and deburring. Ideal for general cleaning and deburring where a fast initial cut is desired. Made from non-woven nylon webbing that is completely impregnated with a very fi ne grit abrasive. This pad is stronger, more resilient and resists tearing or snagging. Easily washed or rinsed, can be used wet or dry. Solvent resistant. Ideal for cleaning copper tubing before brazing.

Ecobee®

Ecobee4™ Wi-Fi Enabled Smart Thermostat w/ Room SensorEB-STATE4P-01-ECB

With a room sensor and built-in Amazon Alexa Voice Service, ecobee4 is more than a smart thermostat. Using built-in Alexa Voice Service, ecobee4 can listen to your voice commands and respond. Have it set a timer, read you the news, adjust the temperature, and more. It also comes with a room sensor that helps manage hot and cold spots in your home, delivering comfort in the rooms that matter.

Mill-Rose®

1.5” Throw-Away Brush1550008

Mill-Rose poly chip brushes are an economical and disposable brush with natural, undyed bris-tles mounted in wooden handles set in epoxy. Chip brushes are ideal for use with resins, glues, acetone and other solvents. Use Mill-Rose chip brushes to clean parts, apply touch-up paint, paint trim, and many other boat, workshop, and household uses.

Mill-Rose®

#2 Acid Brush7000104

These brushes are made with durable, coated in tin paste metal handles. The handles are stamped fi rmly to the bristles to eliminate bristle fall-out. They are offered in three convenient sizes with pure, stiff black-graded natural horsehair.

/ 10 CLOSEOUTS / 11 CLOSEOUTS

BEST PRODUCTS. BEST SERVICE. BEST PEOPLE. | AND SO MUCH MORE… | THAT’S THE INSCO ADVANTAGE! | theInscoAdvantage

No special orders on closeouts. Closeouts limited to quantities on hand.No special orders on closeouts. Closeouts limited to quantities on hand.

50 %

OFF

50 %

OFF

50 %

OFF

50 %

OFF

50 %

OFF

50 %

OFF

50 %

OFF

50 %

OFF

$55SAVE

50 %

OFF

Dormont®

FIP Straight Gas Shutoff Valve2280612 - 1/2”2280614 - 3/4”

This FIP straight gas shutoff valve is constructed with a forged brass body to eliminate the possibility of leaks associated with cast products. It is approved and design certifi ed by CSA for use with natural, manufactured, mixed liquefi ed petroleum gases, and LP gas-air mixtures.

Dormont®

1/2 In FIP X 1/2 In FIP Full Port Gas Shutoff Valve94-3232

This 1/2 inch FIP x 1/2 inch FIP full port gas shutoff valve is constructed with a forged brass body to eliminate the possibility of leaks associated with cast products. It is approved and design certifi ed by CSA for use with natural, manufactured, mixed liquefi ed petroleum gases, and LP gas-air mixtures.

Dormont®

FIP Gas Connector Shutoff Valve2280610 - 1/2” x 1/2”2280620 - 5/8” x 3/4”

These forged brass body valves are100% factory leak tested and design certifi ed by CSA for use with natural, manufactured, mixed liquefi ed petroleum gases and LP gas-air mixtures.

Dormont®

5/8” OD Flare FIP GasConnector Adapter2280900 - 1/2”2280908 - 3/4”

This 5/8 inch OD fl are FIP gas connector adapt-er is constructed of zinc plated carbon steel. It is approved and design certifi ed by CSA for use with natural, manufactured, mixed liquefi ed petroleum gases, and LP gas-air mixtures.

Dormont®

5/8” OD Flare MIP Tapped GasConnector Adapter2281000 - 1/2”2281020 - 3/4”

This 5/8 inch OD fl are MIP tapped FIP gas connector adapter is constructed of zinc plated carbon steel. It is approved and design certifi ed by CSA for use with natural, manufactured, mixed liquefi ed petroleum gases, and LP gas-air mixtures.

/ 12 CLOSEOUTS

No special orders on closeouts. Closeouts limited to quantities on hand.

50 %

OFF

50 %

OFF

50 %

OFF

50 %

OFF

50 %

OFF

Oct. 1st - Dec. 31st, 2019 SHOP NOW INSCO · Magnetic Nut Driver Set- Cushion Grip Handles 646M-KLN...

Documents

Transcript of Oct. 1st - Dec. 31st, 2019 SHOP NOW INSCO · Magnetic Nut Driver Set- Cushion Grip Handles 646M-KLN...