Oceanlift Cranes and Davits 2016

www.oceanlift.com

2

The Oceanlift® Difference

Oceanlift® Cranes & Davits

One size does not fit all, so we design every Oceanlift® crane to easily transfer the load or tender to the water and back on deck, without touching the boat or rail. We visit the boat (depending upon location) or tailor fit from plans to work out the best design and dimensions for your crane. Our unique components and systems allow a wide range of customisation and innovation at little or no extra cost.

The word Oceanlift and the Oceanlift logo above are the registered trademarks and exclusive property of Oceanlift Services Ltd, New Zealand.

All Oceanlift® models are custom designed and manufactured individually (boom length, pedestal height, standpipe length, manual or hydraulic, and other features.

Finished in durable gloss white Duratec® baked over an etch primer to prevent

corrosion and look good for decades Constructed of marine grade high tensile aluminium with stainless steel fittings Boom, pedestal and standpipe are electrically isolated to prevent corrosion and shock All bearings are self lubricating eliminating the need for grease or metal to metal

contact Electric Cranes are fitted with the durable and quiet Comeup® and Superwinch®—12

& 24 volt — with Auto Anchor hand held remote. Winches are Oceanlift

® protected to preserve and prevent corrosion and water ingress

A hand winch option is available on all electric cranes Dynex

® winch line is fitted with counter weight & hook on all electric cranes

Oceanlift® cranes and davits have been manufactured in New Zealand since 1997 for recreational, commercial and infrastructure vessels.

3

Dimensions flexible made to order Boom reach between 1.5M—2.5M Height off deck 500mm up to 750mm (stowed height) Standpipe up to 2.0M below deck. 12V Winch left, right or under boom Colour optional - White standard

The LD is our most popular model, a standpipe mounted crane adaptable to many different situations - foredeck, flybridge, boarding platform, dockside. Dimensions of the boom, pedestal and standpipe, winch position, colour are all case sensitive so we can give you the best tailored fitting at little or no extra cost. A standpipe with deck flange pierces the deck and the bottom end locates onto a foot casting attached to the structure of the boat. We can adapt an LD crane to fit many different mounting locations and styles on boats, docks, jetties.

Oceanlift® LD electric winch crane 200kg & 400kg safe working load options

4

Dimensions flexible made to order - Boom reach between 1.5M—3.5M (depending on SWL required) Height off deck 500mm up to 1200mm (stowed height) Many options – rotation stop, raised pedestal base, flange base pedestal, powered slew, manual winch. Manual slew standard, & gas stay assist boom raise up to working angle 12 or 24VDC electric winch standard mounted left, right or under boom with remote control & Dynex® load cable, hook & counterweight . Standpipe length as required. Colour optional - White standard

Oceanlift® LD electric winch crane 500Kg SWL

The LD 500 shares many well proven design features with our popular LD400 model. The LD500 can be standpipe or flange base mounted. All aspects of this design can be modified to fit this crane to a wide variety of uses, loadings, mountings and reach. We can configure this structure to suit many different applications on commercial, recreational and infrastructure vessels. Installation examples - *33M ferry (rescue crane) 3.5M reach @325Kg SWL *15M Police tender crane 3.0M reach @500Kg SWL, *16M, 18M, & 21M gamefishers foredeck tender lift.

Standpipe 114mm OD Deck flange 350mm OD Standpipe foot 114mm OD or 200mm flange.

5

Oceanlift® LDF electric winch crane flange base 200kg, 400kg options.

Dimensions flexible made to order Boom reach between 1.5M-3.0M Height off deck 500mm up to 750mm Flange base between 300mm & 460mm Cylindrical or tapered square. Manual slew standard, powered slew optional. 12 or 24VDC electric winch standard mounted left, right or under boom with remote control & Dynex® load cable, hook & counterweight . Colour optional - White standard

The LDF has a square or circular flat flange that bolts directly to the deck pad with 8, 10, or 12 bolts, Flanges between 300mm - 500mm square or circular. The LDF is used where it is not possible or desirable to use a deck piercing standpipe. Good for overhanging flybridge decks and foredecks where below deck configuration prevents the use of a standpipe and where the deck is strong enough to support the surface loading. Tailored to suit, winch position, height, reach, flange, colour.

6

Oceanlift® BW electric winch crane bulwark rail mounted, 200kg, 400kg options.

Dimensions flexible made to order—Boom reach between 1.5M—2.6M

Stowed height above rail - 200mm - boom stays horizontal, optional raised working angle.

12 or 24 volt winch below deck or on side of boom with hand held remote

Mounting footprint 270mm diameter

153mm diameter mounting tube below deck

Optional hydraulic telescoping boom

Optional hydraulic slew (Manual slew standard)

Optional cordless remote

The BW mounts on top of a Rail or Bulwark or in a Portofino locker. Requires a minimum of 400mm below the mounting point to accommodate the rotation and mounting structure. The bulwark must be sufficiently strong enough to take the loads imposed in the required arc of rotation.

We can tailor the BW crane to fit many different mounting locations and styles. Standard packages for Squadron, Fairline, Sunseeker, Azimut etc, where passerelles have been removed from transoms. Winch & slew mechanisms hidden below deck.

7

Oceanlift® 2F folding crane 200kg & 400kg safe working load options

Two part folding cranes that stow approx. 220mm—250mm above the deck or can be stowed in a deck cavity or locker. *Below deck bearing socket minimum 400mm deep, 153mm outside diameter. *270mm diameter deck flange with water resistant skirt. *Boom reach optional up to 2.2M *Pedestal height optional—height to match lift geometry—as photo above. *350 degree rotation by hand. *12 or 24VDC Cable winch with handheld remote control. *Pedestal, boom reach and below deck dimensions are all tailored to achieve the best fit. Optional *Cordless remote control *Hydraulic or electric powered rotation (below deck)

8

Oceanlift® 3F folding crane 200kg & 400kg safe working load options

Three part folding cranes that stow approx. 220mm—250mm above the deck or can be stowed in a deck cavity or locker. *270mm diameter deck flange with water resistant skirt. *Pedestal height to match lift geometry—as photo above. *350 degree rotation by hand. *12 or 24VDC Cable winch with handheld remote control. *Pedestal, boom reach and below deck dimensions are all tailored to achieve the best fit. Optional *Cordless remote control *Hydraulic or electric powered rotation (below deck)

9

Oceanlift® Custom cranes.

Here’s some other examples of our cranes

10

Oceanlift® LLD 250kg or 500kg SWL crane 2.5M - 3.5M boom reach.

Variable boom luff angle - Electric/Hydraulic operation.

12 or 24VDC cable winch, concealed.

Hand operated slew up to 350°

Optional Electric/Hydraulic telescoping boom length.

Low level when stowed, 680mm above the deck.

High tensile marine aluminium construction with stainless steel standpipe, one piece

and waterproof.

Durable baked on, DURATEC® gloss finish over an etch bonded primer.

Minimal maintenance, self lubricating permanent bearings.

Options tailored to suit Boom lengths between 2.5M and 3.5M Deck flange height - flat or raised Colour - any Duratec colour Lighting Electric/Hydraulic boom raise & lower Electric/Hydraulic boom length telescoping

11

Oceanlift® H250kg and H500kg SWL crane 2.0M - 3.5M boom reach.

Variable boom luff (raise & lower) angle - Electric/Hydraulic operation up to 40degrees

12 or 24VDC cable winch.

Slew electric or hydraulic powered up to 270 degrees.

Optional hydraulic telescoping boom length.

Stowed height 625mm above the deck for slew below deck or 800 for above deck

slew mount.

Deck flange diameter 450mm.

Durable baked on, DURATEC® gloss finish over an etch bonded primer.

Minimal maintenance, self lubricating permanent bearings.

Options tailored to suit Boom lengths between 2.0M and 3.5M Pedestal height 300mm minimum, up to 600mm Colour - white standard or any other Duratec® colour. Lighting Electric/Hydraulic boom length telescoping Winch position- L or R side of boom or below deck.

12

Oceanlift® PC pipe davit 1.1M reach & 1.6M height to eye holes 12VDC Nilsson CH400 capstan 152mm OD x 100mm deep deck socket , 200mm diameter deck flange, with UHMWPE rotation bearing & thrust washer Gunwhale brace with UHMWPE bearing, 500mm length High tensile aluminium heavy wall pipe , gloss white Duratec or anodised finishes. 100Kg SWL. Ronstan hanging block. 10mm or 12mm cables made to order POA extra charge Optional -deck switches, remote, solenoids.

Oceanlift® PC

Deck socket

Gunwale brace

13

Oceanlift® Cranes & Davits

How to order an Oceanlift® crane Oceanlift® cranes are made to custom dimensions. We do this to ensure that the crane is able to lift the dinghy clear of the deck, over the rail and into the water with clearance over the rail and the side of the boat. In most cases this does not make any change from the standard price. If your boat is located in Auckland, Northland, BOP or Taupo we will visit (at no extra cost) to work out the best crane dimensions and model for you. For any other locations, we can take details from our questionnaire or a boat plan. We produce a drawing of the proposed crane to work out the best dimensions and design for you so that you know how your Oceanlift® crane will look, stow and function. Installation: We suggest that a boat builder installs the crane on your boat, dock, or seawall and we are happy to meet with and to advise your installer.

14

Mothership A……………………………………Height - rail foot to proposed mounting centre B……………………………………Rail height B minus A ……………………… Rail top down to mounting centre C……………………………………Mounting centre to gunwale belting D……………………………………Reach Mounting centre to COG tender E………………………………….. Sheer - mounting centre to where tender passes over rail F……………...…………………….Standpipe length below deck.

Port Starboard Voltage ?..................................................... …………………………………………………………………...

Tender F……………………………………..Tender beam G…………………………………….Tender height at COG H……………………………………..Tube diameter I………………………………………LOA length overall Outboard HP, brand & weight…………………………………………….…… Dry weight tender…………………………………………………………………

Dimensions and details required

15

Dimensions and details required

Safer and easier with an Oceanlift crane

16