OC/ 9&..55,5 - Avcovalve...Email:[email protected] The design submission, tracking number...

TECHNICAL STANDARDS & SAFETY AUTHORITY 345 CARLINGVIEW DRIVE TORONTO ON M9W 6N9

Attn: TANYA FRANCIS

Re: Application for Design Registration

505 - 6th Street, Suite 200 New Westminster, BC V3L OE1

Toll Free: 1-866-566-SAFE

Fax: (778) 396-2064 www.safetyauthority.ca

Date: February 2, 2017 Account#: 35231 Journal #: 67241 Our File#: 5611120

The design, as detailed in your, TSSA SR# 2015958, for a Fitting is accepted for registration as follows:

Registered To:AVCO VALVES & CONTROLS INC CRN: OC19055.51

MDMT: -20 deg F

Drawing #:Avco Catalog, Reg'n Scope Shts Drawing Revision: 0

Conditions Of Registration: Registration of Avco Ball Valve Catalog as per scope of registration sheets (3 pages)

This design was registered based on a technical review performed by the province of initial registration in accordance with the Association of Chief Inspectors policy on reciprocal recognition of design review.

Reviewer's Notes: As required by CSA 851 4.2.1, this registration expires on January 05, 2027. This CRN is valid until the expiry date as long as the Manufacturer maintains a valid quality control program verified by an acceptable third-party agency until that date. Should the certification of the quality control program lapse before the expiry date, this registration shall become void.

Contact me if you have any questions. The invoice for registration will be forwarded under separate cover.

SHARON PETERS

[email protected] Design Administration

cc:

(PROD) 30400-20 GST #: 87391 2802 RT0001

AVCO VALVES & CONTROL, INC. 3210 S. SUSAN ST. SANTA ANA, CALIFORNIA USA, 92704

Product AVCO Design Description Series Code

Three Piece Ball 1100 ASMEB16.34 Valve 1900

Three Piece Ball 1100 ASME 816.34 Valve 1900

Bottom Entry and 1700 ASME 816.34 Side Entry Diverter 1800

Valve

Bottom Entry and 1700 ASME B16.34 Side Entry Diverter 1800

Valve

Flanged Ball Valve 9100 ASME B16.34 9900

Flanged Ball Valve 9100 ASME 616.34 9900

....

THIS IS PART OF RN OC/_9&..55",5

.;LJ:echnical Standards & Safety Authority lers & Pressure Vessels

Safety Program

~sceeeiBE'BRN~REG'r&:mAmt~Nf:

Size Range Body End Connection Material MAWP Class i(Note 1,2,3) Specification (Note 4) (pslg) (Note 5)

1/4" thru 1-1/4" 600 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 1480 psig at 100F CL.150, CL300, ASTM A351-CF8M Stainless Steel 1440 psig at 100F CL.600 Flanged, ASTM A351-CF3M Stainless Steel 1440 pslg at 100F

Buttweld ,ASTM A351-CN7M Alloy 20 1200 psig at 100F ASTM A494-M35-1 Monel400 1200 psig at 100F ASTM A494-CW12MW Hastelloy C 1200 psig at 100F

1-1/2" thru 4" 300 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 740 psig at 100F CL.150, CL.300 ASTM A351-CF8M Stainless Steel 720 psig at 100F

Flanged, Buttweld ASTM A351-CF3M Stainless Steel 720 psig at 100F ASTM A351-CN7M Alloy 20 ,600 psig at 100F ASTM A494-M35-1 Monel400 600 psig at 100F ASTM A494-CW12MW Hastelloy C 800 psig at 1 OOF

1/4" thru 1-1/4" 600 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 1480 psig at 100F CL.150, CL.300, ASTM A351-CF8M Stainless Steel 1440 psig at 100F Cl.600 Flanged, ASTM A351-CF3M Stainless Steel 1440 psig at 100F

Buttweld ASTM A351-CN7M Alloy 20 1200 psig at 100F ASTM A494-M35-1 Monel400 1200 psig at 100F ASTM A494-CW12MW Hastelloy C 1200 psig at 100F

1-112" thru 4" 300 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 740 psigat 100F CL.150, CL.300 ASTM A351-CF8M Stainless Steel 720 psig at 1 OOF

Flanged, Buttweld ASTM A351-CF3M Stainless Steel 720 psig at 1 OOF ASTM A351-CN7M Alloy 20 600 psig at 100F

· ASTM A494-M35-1 Monel400 600 psig at 100F ASTM A494-CW12MW Hastelloy C 800 psig at 1 OOF

1/2" thru 1 O" 150 CL.150 Flanged ASTM A216-WCB Carbon Steel '285 psig at 100F ASTM A351-CF8M Stainless Steel 275 psig at 100F ASTM A351-CN7M Alloy 20 230 psig at 100F ASTM A494-M35-1 Monel 400 230 psigat 100F ASTM A494-CW12MW Hastelloy C 230 psigat 100F

1/2" thru 1 o· 300 CL.300 Flanged ASTM A216-WCB Carbon Steel 740 psig at 100F ASTM A351-CFBM Stainless Steel 720 psig at 100F ASTM A351-CN7M Alloy 20 600 psig at 100F

ASTM A494-M35-1 Monel 400 600 psig at 100F ASTM A494-CW12MW Hastelloy C 600 psig at 1 OOF

05-Jan-17

PAGE 1 OF 3

MDMT (F)

-20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20


HIS IS PART OF RN OC./ Jos-S, hnical Standards & Safety Authority

Boilers & Pressure Vessels Safety Program

15-Dec-16

PAGE20F 3

· ·· ··. :SGep&ilfG8-mRE:Gtslflli@Jt,.:es.tA1Fmm:

Product AVCO Design Size Range Body · End Connection Material MAWP MDMT

Description Series Code Class .'Note 1,2) Soec:lflcatlon ltpslg} (F)

ASME BPE Three 2100 ASME BPE, 1/2" thru 4" N/A ASME BPE Clamp ASTM A351-CF8M Stainless Steel Slze1/2" thru 2-1/2" -20

Piece Ball Valve, 2700 ASMEB31.3. Ferrule (Note 6) ASTM A351-CF3M Stainless Steel 200 psig at 1 OOF

Bottom Entry and 2800 ASTM A351-CN7M Alloy 20 165 psia at 250F

Side Entry Diverter 2900 IASTM A494-M35-1 Monel 400 Slze3"

Valve. ASTM A494-CW12MW Hastelloy C 200 psig at 1 OOF 150 psia at 250F Slze4" 200 psig at 1 OOF 125 psig at 250F

ASME BPE Three 2100 ASMEBPE, 1/2" thru 4" N/A Tube End, Sizes 112" ASTM A351-CF8M Stainless Steel Size 1/2" thru 1" -20

Piece Ball Valve, 2700 ASMEB31.3. thru 3": 0.065" wall ASTM A351-CF3M Stainless Steel 1500 psig at 100F

Bottom Entry and 2800 tube, Size 4": 0.085" Size 1-112'' and 2"

Side Entry Diverter 2900 wall tube (Note 7) 1000 psig at 100F

Valve. Size2-1/2" 800 osia at 100F Slze3" 700 psig at 1 OOF Slze4" 650 psia at 1 OOF

ASME BPE Three 2100 ASMEBPE, 1/2" thru 4" N/A Tube End, Sizes 1/2" ASTM A494-CW12MW Hastelloy C Size 1/2" thru 1'" -20

Piece Ball Valve, 2700 ASMEB31.3. thru 3": 0.065" wall 1500 psig at 100F

Bottom Entry and 2800 tube, Size 4": 0.085" Size 1·112" and 2"

Side Entry Diverter 2900 wall tube (Note 7) 1000 psig at 100F

Valve. Size 2·1/2" 850 psig at 1 OOF Size3" 700 psig at 100F Slze4'" 700 psia at 1 OOF

' I



ASME BPE Three 2100 ASMEBPE, Piece Ball Valve, 2700 ASME 931.3. Bottom Entry and 2800

Side Entry Diverter 2900 Valve.

HIS IS PART OF RN CC-tJoSS..

Standards & Safety Authority Boilers & Pressure Vessels

Safety Program

. < 'S. ri:~h:e····r~'r!i~'fi'N. ·;:-n:)"'ro.~·s·!JRA-r.l· ~lii1;;.t:-·"'"'~IN. •;te· 1"\ .· ~, .Xii":W.r:= ~~W.C*.'>A· _. <JX'C-:UI ~::II· _Uf~*:-V.'\:J'I,~¥: . :\:1 ,·JJ:'

Size Range Body End Connection Material MAWP Class lNote 1,2) Specification psi g)

1/2" thru 4" N/A Tube End, Sizes 112" ASTM A351-CN7M Alloy 20 Size 1/2" thru 1" thru 3": 0.065" wall ASTM A494-M35-1 Monel 400 1500 psig at 100F

tube, Size 4": 0.085" Size 1·1/2" wall tube (Note .7) 1000 psig at 100F

Size2" 850 psig at 1 OOF Size 2·1/2" 700 psig at 1 OOF Size3" 550 psig at 1 OOF Slze4" 550 psi.g at 1 OOF

-----

Nota 1: In all cases the pressure-temperature ratings of the valves may be limited by the seat and seal materials. Consult AVCO literature.

Note 2: In all cases the pressure-temperature ratings of a flanged valve are limited by the pressure-temperature ratings of the flange

Note 3: Consult factory for valve ratings with buttweld end connections below ASME 816.10M schedule 10.

Note 4: For valve series 1100, 1700, 1800, 1900, 9100 and 9900 other ASME 816.34 materials may be supplied. When this is the case the pressuretemperature ratings of the valves are in accordance with the applicable ASME 816.34 Table 2 ratings.

Note 5: For valve series 1100, 1700, 1800, 1900, 9100 and 9900 the pressure-temperature ratings above 100F are in accordance with the applicable ASME 816.34 Table 2 ratings.

Note 6: The assembly clamp is not part of the CRN. Pressure-Temperature ratings may be limited by the clamp type used in the joint assembly Consult Clamp Manufacturer for clamp Pressure-Temperature ratings.

Note 7: Above 100F the pressure-temperature ratings of tube end valves are to be calculated in accordance with para. 304.1 of ASME 831.3.

15-Dec-16

PAGE 3 OF3

MDMT (F)

-20

9410- 20 Ave N.W.

the pressure equipment safety authority

Edmonton, Alberta, Canada T6N OA4

Tel: (780) 437-9100 I Fax: (780) 437-7787

March 14, 2017

Attention: Tanya Francis

TECHNICAL STANDARDS & SAFETY AUTHORITY

345 CARLINGVIEW DRIVE

TORONTO, ON M9W 6N9

Email:[email protected]

The design submission, tracking number 2017-00590, originally received on February 01, 2017 was surveyed and accepted for registration as follows:

CRN: OC19055.52

Reg Type: New Design

Accepted on: March 14, 2017

Expiry Date: January 05, 2027

Drawing No.: CATALOG- AVCO BALL VALVES As Noted

Fitting type: VALVE

Design registered in the name of: AVCO VALVES & CONTROL INC

The registration is conditional on your compliance with the following notes:

As indicated on A8-41 Statutory Declaration form and submitted documentation, the code of construction are 816.34 and ASME 831.3.

This registration is valid only for fittings fabricated at the location(s) covered by the QC certificate attached to the accepted A8-41 Statutory Declaration form.

This registration is valid only until the indicated expiry date and only if the Manufacturer maintains a valid quality management system approved by an acceptable third-party agency until that date.

Should the approval of the quality management system lapse before the expiry date indicated above, this registration shall become void.

The registration is for the valves only and do not include clamp. The 8EP ferrule is not to be used alone. The clamp used for the ferrule connection shall have its CRN rated equal or higher than the ferrule valve and is suitable for the ferrule connection.

An invoice covering survey and registration fees will be forwarded from our Revenue Accounts.

Enclosed are stamped prints for your reference.

Sincerely,

LIU, XING, P. Eng.

2017-00590 Page 1 of 1

STATUTORY DECLARATION Registration of Fittings

I, MARK WEINER CEO

In this space, show facsimile of manufacturer's logo or trademark as it will appear on the fitting.

(name of applicant) (position title) (must be in a position of authority)

of AVCO VALVES & CONTROL, INC. (name of manufacturer)

located at 3210 S. SUSAN ST., SANTA ANA, CA, 92704 (plant address)

do solemnly declare that the fittings listed hereunder, which are subject to the Safety Codes Act (check one)

comply with the requirements of ASME 816.34, ASME 831.3 which specifies the dimensions, (title of recognized North American Standard)

materials of construction, pressure/temperature ratings and identification marking of the fittings, or

D are not covered by the provisions of a recognized North American standard and are therefore manufactured

to comply with

attached

as supported by the

(title of code of construction or other applicable document)

data which identifies the dimensions, materials of construction, pressure/temperature ratings and the basis

for such ratings, and the marking of the fittings for identification.

I further declare that the manufacture of these fittings is controlled by a quality control program which has been

verified by the following authority, IS0:9001 :2015 ANA8 as being suitable for the manufacture of these

fittings to the stated standard. The fittings covered by this declaration, for which I seek registration, are

CATEGORY C- VALVES (brief description of fittings)

In support of this application, the following information, calculations and/or test data are attached:

SCOPE OF CRN REGISTRATION, DESIGN REPORTS, DRAWINGS, CALCULATIONS

DECLARED before me at in the of ----~(~city~)~------ --------------- (province or state)

this day of -------------- ----~(M~o~n~th~)----- (Year)

(print) ---(r.:a'c.-::o=m=m:;::is-::;si-=:on=-=e::-r :::~of!?O'-=a:r.:th::-s~or:-;N:;-:o::;::ta=-=ry-:opn.u7t::b"-lic=-) -----

(sign) ---:--:::----:---:--~-:-:-~-:-:---=-:-::--:----(a Commissioner of Oaths or Notary Public) (signature of applicant)

For ABSA Office Use Only:

NOTES:

0)

Date Registered: ?fJI7- {}3- I r Expiry Date: }ot,7--o/ ~tJ_S-

CALIFORNIA JURAT

A notary public or other officer completing this certificate verifies only the identity of the individual who signed

the doc~ment, to which this certificate is attached, and not the truthfulness, accuracy, or validity of that

document.

STATE OF CALIFORNIA }

COUNTY OF Oi..A .... /Ct c::- }

Subscribed and sworn to (or affirmed} before me on this / f~ day of __ H __ ~--~-~---'~{ ~ Dott MDII~ Ytor

bv HA-(2,((

·.:::.- Nonw of Slgrwn

proved tQ me on the basis of satisfactory evidence to be the persoflw> appeared before me:

-~a a a a 0 n 0 a n 0 a 0 0 0 0 a c 0 a

••••.. .. HILLAL BARADEHI ~ •. . COMMISSION #21292651 i Notary Public • California i % . · ORANGE COUNTY o

· My Commission Expires -NOVEM13ER 4, 2019

Seol Ploce Notory Seol Above

·-----····--·-··-·····················--··········· ()J»lri()~~L ------------·-·---------------~-------------------· . Thoug_h this section is optionol, completing this information con deter olterotion of the document or fraudulent

ent of this form to on unintended document.

Description of A hed Document

Title or Type of Docu

oc

AVCO VALVES & CONTROL, INC. 3210 S. SUSAN ST. SANTA ANA, CALl FORN lA USA, 92704


Three Piece Ball 1100 ASME B16.34 Valve 1900



Valve


Valve



-- ------ -~

y l') 0 ~~ ~ 'l II' -~ v li v

05-Jan-17

PAGE 1 OF 3

seoe:e.Q:f CRN ijEGIS"tRATIQN' r

Size Range Body End Connection Material MAWP MDMT Class (Note 1 ,2,3) Specification (Note 4) (psig) (Note 5) (F)

1/4" thru 1-1/4" 600 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 1480 psig at 100F -20 CL.150, CL.300, ASTM A351-CF8M Stainless Steel 1440 psig at 100F -20 CL.600 Flanged, ASTM A351-CF3M Stainless Steel 1440 psig at 100F -20

Buttweld ASTM A351-CN7M Alloy 20 1200 psig at 1 OOF -20 ASTM A494-M35-1 Monel 400 1200 psig at 100F -20 ASTM A494-CW12MW Hastelloy C 1200 psig at 100F -20

1-1/2" thru 4" 300 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 7 40 psig at 1 OOF -20 CL.150, CL.300 ASTM A351-CF8M Stainless Steel 720 psig at 1 OOF -20

Flanged, Buttweld ASTM A351-CF3M Stainless Steel 720 psig at 100F -20 ASTM A351-CN7M Alloy 20 600 psig at 1 OOF -20 ASTM A494-M35-1 Monel400 600 psig at 100F -20 ASTM A494-CW12MW Hastelloy C 600 psig at 1 OOF -20

1/4" thru 1-1/4" 600 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 1480 psig at 100F -20 CL.150, CL.300, ASTM A351-CF8M Stainless Steel 1440 psig at 100F -20 CL.600 Flanged, ASTM A351-CF3M Stainless Steel 1440 psig at 100F -20

Buttweld ASTM A351-CN7M Alloy 20 1200 psig at 100F -20 ASTM A494-M35-1 Monel 400 1200 psig at 100F -20 ASTM A494-CW12MW Hastellov C 1200 psig at 1 OOF -20


Flanged, Buttweld ASTM A351-CF3M Stainless Steel 720 psig at 1 OOF -20 ASTM A351-CN7M Alloy 20 600 psig at 1 OOF -20 ASTM A494-M35-1 Monel 400 600 psig at 100F -20 ASTM A494-CW12MW Hastellov C 600 psig at 1 OOF -20

1/2" thru 1 0" 150 CL.150 Flanged ASTM A216-WCB Carbon Steel 285 psig at 1 OOF -20 ASTM A351-CF8M Stainless Steel 275 psig at 100F -20 ASTM A351-CN7M Alloy 20 230 psig at 1 OOF -20 ASTM A494-M35-1 Monel 400 230 psig at 1 OOF -20 ASTM A494-CW12MW Hastelloy C 230 psig at 100F -20

1/2" thru 1 0" 300 CL.300 Flanged ASTM A216-WCB Carbon Steel 7 40 psig at 1 OOF -20 ASTM A351-CF8M Stainless Steel 720 psig at 100F -20 ASTM A351-CN7M Alloy 20 600 psig at 1 OOF -20 ASTM A494-M35-1 Monel 400 600 psig at 1 OOF -20 ASTM A494-CW12MW Hastelloy C 600 psig at 1 OOF -20

- ----


Product Description

ASME BPE Three Piece Ball Valve, Bottom Entry and

Side Entry Diverter Valve.


Side Entry Diverter Valve.


Side Entry Diverter

r\ r 1 IJ \..;, l

Valve.

AVCO Series

2100 2700 2800 2900

2100 2700 2800 2900

2100 2700 2800 2900

Design Code

ASME BPE, ASME B31.3.

ASME BPE, ASME 831.3.

ASME BPE, ASME B31.3.

Size Range Body Class

1/2" thru 4" NIA

1/2" thru 4" N/A

1/2" thru 4" N/A

15-Dec-16

PAGE20F3

End Connection Material MAWP MDMT

(Note 1,2) Specification (pslg) (F)

ASME BPE Clamp ASTM A351-CF8M Stainless Steel Size 1/2" thru 2-1/2" -20

Ferrule (Note 6) ASTM A351-CF3M Stainless Steel 200 psig at 100F ASTM A351-CN7M Alloy 20 165 psig at 250F ASTM A494-M35-1 Monel400 Slze3" ASTM A494-CW12MW Hastelloy C 200 psig at 100F

150 psig at 250F Size4" 200 psig at 1 OOF 125 psig at 250F

Tube End, Sizes 1/2" ASTM A351-CF8M Stainless Steel Size 1/2" thru 1'" -20

thru 3": 0.065" wall ASTM A351-CF3M Stainless Steel 1500 psig at 100F tube, Size 4": 0.085" Size 1-1/2" and 2" wall tube (Note 7) 1000 psig at 100F

Size 2-1/2" 800 psig at 1 OOF Size3" 700 psig at 1 OOF Size4" 650 psig at 1 OOF

Tube End, Sizes 1/2" ASTM A494-CW12MW Hastelloy C Size 1/2" thru 1" -20

thru 3": 0.065" wall 1500 psig at 1 OOF tube, Size 4": 0.085" Size 1-1/2" and 2"

wall tube (Note 7) 1000 psig at 100F Size 2-1/2" 850 psig at 100F Size3" 700 psig at 1 OOF Size4" 700 psig at 1 OOF



ASME BPE Three 2100 ASME BPE, Piece Ball Valve, 2700 ASME B31.3. Bottom Entry and 2800


Size Range Body End Connection Material Class I<Note 1,2) Specification

1/2" thru 4" N/A Tube End, Sizes 1/2" ASTM A351-CN7M Alloy 20 thru 3": 0.065" wall ASTM A494-M35-1 Monel 400

tube, Size 4": 0.085" wall tube (Note 7)

Note 1: In all cases the pressure-temperature ratings of the valves may be limited by the seat and seal materials. Consult AVCO literature

Note 2: In all cases the pressure-temperature ratings of a flanged valve are limited by the pressure-temperature ratings of the flange.

Note 3: Consult factory for valve ratings with buttweld end connections below ASME B16.10M schedule 10.

MAWP (psi g) Size 1/2" thru 1" 1500 psig at 1 OOF Size 1-1/2" 1 000 psig at 1 OOF Size2" 850 psig at 1 OOF Size 2-1/2" 700 psig at 100F Size3" 550 psig at 1 OOF Size4" 550 psig at 1 OOF

Note 4: For valve series 1100, 1700, 1800, 1900, 9100 and 9900 other ASME B16.34 materials may be supplied. When this is the case the pressure· temperature ratings of the valves are in accordance with the applicable ASME B16.34 Table 2 ratings.

Note 5: For valve series 1100, 1700, 1800, 1900, 9100 and 9900 the pressure-temperature ratings above 1 OOF are in accatdance with the· applicable--AS ME B16.34 Table 2 ratings. t ·.

I

15-Dec-16

PAGE30F3

MDMT (F)

-20

Note 6: The assembly clamp is not part of the CRN. Pressure-Temperature ratings may be limited by the clamp type used inJJw.ioTrl! (s$~nfuly.- · · -- T ;c;: Oi- /\LCERTA Consult Clamp Manufacturer for clamp Pressure-Temperature ratings. ·

r~:~ Note 7: Above 100F the pressure-temperature ratings of tube end valves are to be calculated in accordance with para. 301.1 of ASME B31.3.

' I

,.; ": r·-=:~rr: ~\1 ~~-~~s

OC19055 5~ )- I L: "• : •' • • • ·~ ..) •

! ·- .,., :=:.c. ::•. ~-loL.~ ~~~·=~·>.• .·• ~~,P ,,~.;.~,.,.,_,.,.,_,...,.. ... .,r_..._""' __

~ ' . :·;:c.:;:, ' : ,_ ' -_}/~~-·-·---·· ------~-

1 Jltl!~p3_::}!/' ! · .ecce·.··.··~ ___ J l '"'~"' ~icS'~· :~G;,-~1~! t::Y::::~::::R, _

Inspection and Technical Services Manitoba 508 - 401 York Avenue Winnipeg Manitoba R3C OP8 T (204) 945-3373 F (204) 948-2309 www.firecomm.gov.mb.ca/codes_steam_pressure.html

April10, 2017

TSSA 345 Carlingview Drive Toronto, ON M9W6N9

Attn: Tanya Francis

REGISTRATION OF VALVES AND FITTINGS

Manufacturer: A VCO VALVES & CONTROL

The design(s) for the following Valves/Fittings has been received by us and has been examined and accepted for registration in the Province of Manitoba as follows.

DRAWING/CATALOGUE CRN FILE AVCO BALL VALVES CATALOGUE

SEE ATTACHED STAMPED "THlS IS PART OF OC19055.54 37518 CRN" FOR SCOPE OF REGISTRATION 3 PAGES

An invoice covering survey and registration fees is enclosed.

NOTE: CRN registered under reciprocal agreement & is conditional based on compliance with the notes set by the original issuing Jurisdiction: TSSA. This registration expires January 5, 2027.

This registration is valid until the indicated expiry date only if the Manufacturer maintains a valid quality management system approved by an acceptable third-party agency until that date. Should the approval of the quality management system lapse before the expiry date indicated above, this registration shall become void.

The registration of this design does not relieve the manufacturer, the owner or his agent of the responsibility for the design or construction of a fitting in accordance with the applicable Acts, Codes and Standards. Inspection and Technical Services assumes no responsibility by registering designs, examining plans and/or inspecting equipment or facility.

Ryan Orleskyj Design Surveyor Office of the Fire Commissioner Inspection and Technical Services Manitoba 508-401 York Avenue Winnipeg, Manitoba, R3C OP8 Phone: 204-945-3373 Email: [email protected]

TECHNICAL STANDARDS & SAFETY AUTHORITY

Show facsimile of manufacturer's logo or trademark, as it will appear on the fitting, in the space below

14th Floor, Centre Tower 3300 Bloor Street West Toronto, Ontario Canada MSX 2X4

STATUTORY DECLARATION Registration of Fittings

1, MARK WEINER, CEO (Name and Position, e.g. President, Plant Manager, Chief Engineer)

of AVCO VALVES & CONTROL, INC. (Name of Manufacturer)

Located at 3210 S. SUSAN ST., SANTA ANA, CA, 92704 (Plant Address)

714-427-osn

(Telephone No.)

714-427-6392

(Fax No.)

rzJ do solemnly declare that the fittings listed hereunder, which are subject to the Technical Standards and Safety Act, Boilers and Pressure Vessels Regulation, comply with all of the requirements of ASME 816.34, ASME 831.3

(Title of recognized Norlh American Standard)

which specifies the dimensions, materials of construction, pressure/temperature ratings, identification marking the fittings and service;

D or are not covered bv the orovisions of a recognized North American standard and are therefore manufactured to comply with _____________ as supported by the attached data which identifies the dimensions, material of construction, pressure/temperature ratings and the basis for such ratings, the marking of the fitting for identification and service.

I further declare that the manufacture of these fittings is controlled by a quality system meeting the requirements of IS0:9001 :2015 ______ which has been verified by the following authority, _A_N_A_B _________________ ""'

The items covered by this declaration, for which I seek registration, are catego~y C - VALVES type fittings. In support of

this application, the followinq information and/or test data are attached as follows: SCOPE OF CRN REGISTRATION, DESIGN REPORTS, DRAWINGS, CALCULATIONS

(drawings, calculations, test reports, etc.)

Declared before me at ______________ in the---------- of ______ _

the------day of _______ Ao 20 __ _

Commissioner for Oaths:

(Printed name)

(Signature of Declarer)

FOR OFFICE USE ONLY

CRN:

Registered by: .- ".~:-::::-, '"· \.~-: :.;. _ _;;§

·,:~/ifl&~t'l?J:;/Mr Dated:

PV 09553 (06/04)

CALIFORNIA JURAT

A notary public or other officer completing this certificate verifies only the identity of the individual who signed

the doc~ment, to which this certificate is attached, and not the truthfulness, accuracy, or validity of that

document.

STATE OF CALIFORNIA }

COUNTY OF OLP:rJ"'-

Subscribed and sworn to (or affirmed) before me on this \ ~ day of _ _...;.."'...:.:~:...!....4::;:___.fo\ l.c, Dorf! Month

·:;::.-_ Nome of Signers

proved to me on the basis of satisfactory evidence to be the perso~ho appeared before me:

Seal Place Notary Seal Above

·-----------------------------------·------·------- 0 PTIO N A L -------------------·---------.-------------------. Though this section is optional, completing this information con deter alteration of the document or fraudulent

ent of this form to on unintended document.

Description o ached Document Title or Type of Doc ·






Valve


Valve


Flanged Ball Valve 9100 ASME B16.34 QQ()()

lnopec:llon _8 r,.toos ~ :e of the Flr8 Technical 6< Manitoba

Lilnh4~ u ...

THIS IS PART OF CRN

{J'CttfO ~~- ~1 --

05-Jan-17

PAGE1 OF3

SCOPE OF CRN REGISTRATION

Size Range Body End Connection Material MAWP MDMT Class (Note 1 ,2,3) Specification (Note 4) (psig) (Note 5) (F)

1/4" thru 1-1/4" 600 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 1480 psig at 100F -20 CL.150, CL.300, ASTM A351-CF8M Stainless Steel 1440 psig at 100F -20 CL.600 Flanged, ASTM A351-CF3M Stainless Steel 1440 psig at 1 OOF -20

Buttweld ASTM A351-CN7M Alloy 20 1200 psig at 100F -20 ASTM A494-M35-1 Monel 400 1200 psig at 100F -20 ASTM A494-CW12MW Hastelloy C 1200 psig at 100F -20


Flanged, Buttweld ASTM A351-CF3M Stainless Steel 720 psig at 100F -20 ASTM A351-CN7M Alloy 20 600 psig at 1 OOF -20 ASTM A494-M35-1 Monel 400 600 psig at 1 OOF -20 ASTM A494-CW12MW Hastelloy C 600 psig at 1 OOF -20

1/4" thru 1-1/4" 600 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 1480 psig at 100F -20! CL.150, CL.300, ASTM A351-CF8M Stainless Steel 1440 psig at 100F -20 CL.600 Flanged, ASTM A351-CF3M Stainless Steel 1440 psig at 100F -20

Buttweld ASTM A351-CN7M Alloy 20 1200 psig at 1 OOF -20 ASTM A494-M35-1 Monel 400 1200 psig at 100F -20 ASTM A494-CW12MW Hastelloy C 1200 psig at 100F -20

1-1/2" thru 4" 300 FNPT, Socket Weld, ASTM A216-WCB Carbon Steel 740 psig at 100F -20 CL.150, CL.300 ASTM A351-CF8M Stainless Steel 720 psig at 100F -20

Flanged, Buttweld ASTM A351-CF3M Stainless Steel 720 psig at 1 OOF -20 ASTM A351-CN7M Alloy 20 600 psig at 100F -20 ASTM A494-M35-1 Monel 400 600 psig at 1 OOF -20 ASTM A494-CW12MW Hastelloy C 600 psig at 1 OOF -20

1/2" thru 1 0" 150 CL.150 Flanged ASTM A216-WCB Carbon Steel 285 psig at 1 OOF -20 ASTM A351-CF8M Stainless Steel 275 psig at 1 OOF -20 ASTM A351-CN7M Alloy 20 230 psig at 100F -20 ASTM A494-M35-1 Monel 400 230 psig at 100F -20 ASTM A494-CW12MW Hastelloy C 230 psig at 100F -20

1/2" thru 1 0" 300 CL.300 Flanged ASTM A216-WCB Carbon Steel 7 40 psig at 1 OOF -20 ASTM A351-CF8M Stainless Steel 720 psig at 1 OOF -20 ASTM A351-CN7M Alloy 20 600 psig at 1 OOF -20 ASTM A494-<'M35-1 Monel 400 600 psig at 1 OOF -20 ASTM A494-CW12MW Hastelloy C 600 psig at 100F -20









----

In~&- Oftlcllaflllaflle Techni!llll ~ COinRollilllliU Manitoba

MooU.oba-THIS IS PART OF CRN

)t'C tcto.J'~ ~f -~~ ~~

15-Dec-16

PAGE2 OF 3

SCOPE OF CRN REGISTRATION CONTINUED

Size Range Body End Connection Material MAWP MDMT Class (Note 1,2) Specification (psig) (F)

1/2" thru 4" N/A ASME BPE Clamp ASTM A351-CF8M Stainless Steel Size 1/2" thru 2-1/2" -20 Ferrule (Note 6) ASTM A351-CF3M Stainless Steel 200 psig at 1 OOF

ASTM A351-CN7M Alloy 20 165 psig at 250F ASTM A494-M35-1 Monel 400 Size3" ASTM A494-CW12MW Hastelloy C 200 psig at 1 OOF

150 psig at 250F Size4" 200 psig at 1 OOF 125 psig at 250F

1/2" thru 4" N/A Tube End, Sizes 1/2" ASTM A351-CF8M Stainless Steel Size 1/2" thru 1" -20 thru 3": 0.065" wall ASTM A351-CF3M Stainless Steel· 1500 psig at 1 OOF

tube, Size 4": 0.085" Size 1-1/2" and 2" wall tube (Note 7) 1000 psig at 100F

Size 2-1/2" 800 psig at 1 OOF Size3" 700 psig at 1 OOF Size4" 650 psig at 1 OOF

1/2" thru 4" N/A Tube End, Sizes 1/2" ASTM A494-CW12MW Hastelloy C Size 1/2" thru 1" -20 thru 3": 0.065" wall 1500 psig at 100F

tube, Size 4": 0.085" Size 1-1/2" and 2" wall tube (Note 7) 1000 psig at 1 OOF

Size 2-1/2" 850 psig at 1 OOF Size3" 700 psig at 1 OOF Size4"

L_ ____ -- ------- - ----- L_ - - ------ -~ ---- -~

ZOQ_p_si!;J at__!(JOF _____ -------






Size Range Body End Connection Material Class (Note 1,2) Specification

1/2" thru 4" N/A Tube End, Sizes 1/2" ASTM A351-CN7M Alloy 20 thru 3": 0.065" wall ASTM A494-M35-1 Monel 400

tube, Size 4": 0.085" wall tube (Note 7)

Note 1: In all cases the pressure-temperature ratings of the valves may be limited by the seat and seal materials. Consult AVCO literature.

Note 2: In all cases the pressure-temperature ratings of a flanged valve are limited by the pressure-temperature ratings of the flange

Note 3: Consult factory for valve ratings with buttweld end connections below ASME B16.1 OM schedule 10.

MAWP (psig) Size 1/2" thru 1" 1500 psig at 100F Size 1-1/2" 1 000 psig at 1 OOF Size2" 850 psig at 1 OOF Size 2-1/2" 700 psig at 1 OOF Size3'" 550 psig at 100F Size4" 550 psig at 100F

Note 4: For valve series 1100, 1700, 1800, 1900, 9100 and 9900 other ASME B16.34 materials may be supplied. When this is the case the pressure· temperature ratings of the valves are in accordance with the applicable ASME B16.34 Table 2 ratings.

Note 5: For valve series 1100, 1700, 1800, 1900, 9100 and 9900 the pressure-temperature ratings above 100F are in accordance with the applicable ASME B16.34 Table 2 ratings.

Note 6: The assembly clamp is not part of the CRN. Pressure-Temperature ratings may be limited by the clamp type used in the joint assembly Consult Clamp Manufacturer for clamp Pressure-Temperature ratings.

Note 7: Above 1 OOF the pressure-temperature ratings of tube end valves are to be calculated in accordance with para. 304.1 of ASME B31.3.

lnepecllon & Olftce of the Flnl Teehnlca!SoMcoll CorMllssloner Manitoba

Marntoba~ THIS IS PART OF CRN

fc_;qoss-: )/j

15-Dec-16

PAGE3 OF3

MDMT I

(F) -20

TSSf

TECHNICAL STANDARDS &SAFETYAUTHORITY14th Floor, Cenlre Tower3300 Bloor Sheel WestToronto, OntarioCanada M8X2X4

Showfacsimile of manufacturer's logo ortradernark, as itwillappear on the fitting, in the space bdcxrv

ñcoSTATUTORY DECLARATION

Registration of Fitt¡ngs

t, MARKWEINER, CEO

(Nane and Posilion, e.g. Pres¡dent, Plant Manage4 Chief Engineer)

of AVCO VALVES & CONTROL, INC.

(Name of Manufacturer)

Located at 3210 S. SUSAN ST., SANTAANA, CA, 92704 714-427-0877 714-427-6392

(Plant Address) (Telephone No.) (Fax No.)

ø do solemnly declare that the littings listed hereunder, which are subject to the Technlcal Standards and SafetyÁcf, Boilersand Pressure Vessels Regulation, comply w¡th all of the requirements ofASME 816.34, ASME 831.3

(T¡ile of recognized Noñh Ameñcan Standard)

wtriú specifies the dimensions, materials of ænstrudion, pæsuæ/tempemfure rat¡ngs, identificatìon nra*ing the fittings and service;

or are not covered bv the orovisions of a recognized Norlh American standard and are therefore manufaclured to comply with

*,,*",."'*,."*","*n åïä,i.[io,:I,l!: :ffi"l*ff F#ä ;,ii#',i::,triffi ï:Ï:ilä'ff::" constru ction'

I further declare that the manufacture of these fittings is controlled by a qualþ system meeting fte requirements e¡ ISO:9001:2015

r¡vtûú has been verified by hefollowing autnrity, ANAB

The ite¡m oovered by tris dedaration, for wt¡iú I seek regislraltux, are catqoryhis applicatim, ü.e follr¡ilíng infonnation andlor te$ data are attad¡ed as follows:

SCOPE OF CRN REGISTRATION, DESIGN REPORTS. DRAWINGS, CALCULATIONS

C - VALVES type fitlings. ln support of

(drawìngs, calculations, test repons, etc.)

the _ day of AD 20_.

Declared before me at in the

(Printed name)

(S ig nature of De cl a re r)

of

(Sígn1ture)

Gommissioner for Oaths:

FOR OFFICE USE ONLYTo the best of my knrrwledge and beliel the application mæts he requirements of the

I

NoTE: This reqistration exÞ¡res on -Tt4rj - .f , 2 ? Z ]

oe l9e,f{'5

I

Regulation, andn

TktJ, Ð 2p(] føa, ç

CRN

Registered by:

:

Dated:

Technlcal Standards and SafefyAcf, Boilers and PressureVessels

CSA Standard 851 and is accepted for registration in Category

vv0ss53(06!oq) //61/e. &A I ) PAqf J ócofL {EÇtsrß*noxt frrrkffEÐ,<blq

AVCO VALVES & CONTROL, INC3210 S. SUSAN ST.SANTA ANA, CALIFORNIAusA,92704

ñcoTHIS IS PART OFcRN oc/9e5J;5Tæhnical Standards & SafetyAuthority

Boilers & Pressure VessetsSafety Program

05-Jan-17

PAGE I OF 3

SCOPE OF CRN REG¡STRATION

MDMTlF)

-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20

MAWP(psis) (Note 5l1480 psiq at 100F1440 psiq at 100F1440 psiq at 100F1200 psis at 100F1200 psis at 100F1200 psis at 100F740 psis at 100F720 psis at l00F720 psis at 100F600 psiq at 100F600 psiq at 100F600 psiq at 100F1480 psiq at 100F1440 psiq at 100F1440 psiq at 100F1200 ps¡q at 100F1200 psiq at 100F1200 psiq at 100F740 psiq at 100F720 psiq at 100F720 psiq at 100F600 psiq at 100Fô00 psiq at 100F600 psiq at 100F285 psio at 100F275 psiq at 100F230 psiq at 100F230 psis at 100F230 psis at 100F740 psis at 100F720 psig at 100F600 psis at 100F600 psig at 100F600 psis at 100F

MaterialSpecification (Note 4)ASTM 4216-WCB Carbon SteelASTM 4351-CFBM Stainless SteelASTM 4351-CF3M Stainless SteelASTM 4351-CN7M Allov 20ASTM 4494-M35-1 Monel 400ASTM 4494-CW12MW Hastellov CASTM 4216-WCB Carbon SteelASTM A351-CF8M Stainless SteelASTM 4351-CF3M Stainless SteelASTM 4351-CN7M Alloy 20ASTM A494-M35-1 Monel 400ASTM A494-CW12MW Hastellov CASTM A216-WCB Carbon SteelASTM 4351-CF8M Stainless SteelASTM A351-CF3M Stainless SteelASTM 4351-CN7M Alloy 20ASTM 4494-M35-1 Monel 400ASTM 4494-CW12MW Hastelloy CASTM A216-WCB Carbon SteelASTM 4351-CF8M Stainless SteelASTM A35l-CF3M Stainless SteelASTM A351-CN7M Alloy 20ASTM 4494-M35-l Monel 400ASTM 4494-CW12MW Hastelloy CASTM 4216-WCB Carbon SteelASTM 435'l-CF8M Stainless SteelASTM 4351-CN7M Alloy 20ASTM 4494-M35-1 Monel 400ASTM 4494-CW12MW Hastellov CASTM 4216-WCB Carbon SteelASTM 4351-CF8M Stainless SteelASTM 4351-CN7M Allov 20ASTM A494-M35-1 Monel 400ASTM 4494-CW12MW Hastellov C

End Connection(Note 1,2,3)FNPT, Socket Wdd,

c1.150, C1.300,CL.600 Flanged,

Buttweld

FNPT, Socket Weld,c1.150, C1.300

Flanged, Buttweld

FNPT, Socket Weld,c1.150, C1.300,CL.600 Flanged,

Buttweld

FNPT, Socket Weld,c1.150, C1.300

Flanged, Buttweld

CL.150 Flanged

CL.300 Flanged

BodyGlass

600

300

600

300

150

300

Size Range

1l4" thru 1-114"

1-112" lhru 4"

114" lhru 1-114"

1-112" thru 4"

1/2" thru 10"

1/2" thru 10"

DesignCode

ASME 816.34

ASME 816.34

ASME 8I6.34

ASME 816.34

ASME 816.34

ASME 816.34

AVCOSeries

I 1001900

1 1001900

17001800

17001800

91009900

91 009900

ProductDescription

Three Piece BallValve

Three Piece BallValve

Bottom Entry andSide Entry Diverter

Valve

Bottofn Entry andSide Entry Diverter

Valve

Flanged Ball Valve

Flanged Ball Valve

THIS IS PART OFCRN OCt 9e î5"Tæhnical Standards & SafetyAuthorityBoilers & Pressure Vessels

Safety Program

AVCO VALVES & CONTROL, INC.3210 S. SUSAN ST.SANTA ANA, CALIFORNIAusA,92704 /ryco

15-Dec-16

PAGE 2 OF 3

SCOPE OF CRN REGISTRATION CONTIT{UED

MDMTfF)

-20

-20

-20

MAWP

Size 1/2" th¡u2-112"200 psig at 100F165 psis at 250FSize 3"200 psig at 100F150 psis at 250FSize ¡f"200 psig at 100F125 psis at 250FSize l/2" thru l"1500 psiq at 100FSizel-112" and2"1000 psiq at 100FSize2-112"800 psiq at 100FSize 3"700 psiq at 100FSize 4"650 psiq at 100FSize 1l2" thru l"1500 psig at 100FSize l-ll2" and 2"1000 psig at 100FSize2-112"850 psig at 100FSize 3"700 psig at 100FSize 4"700 psiq at 100F

MaterialSpecificationASTM 4351-CF8M Stainless SteelASTM 4351-CF3M Stainless SteelASTM A3sl-CN7M Alloy 20ASTM A494-M35-1 Monel 400ASTM 4494-CW12MW Hastelloy C

ASTM 4351-CF8M Stainless SteelASTM 4351-CF3M Stainless Steel

ASTM 4494-CWl2MW Hastelloy C

End ConnectionlNote 1.21

ASME BPE ClampFerrule (Note 6)

Tube End, Sizes 1/2"thru 3": 0.065" wa||

tube, Size 4": 0.085"wall tube (Note 7)

Tube End, Sizes 1/2"thru 3": 0.065" wall


BodyClass

N/A

N/A

N/A

Size Range

112" lhru 4"

112" lhru 4"

112" lhru 4"

DesignGode

ASME BPE,ASME 831.3.



AVCOSeries

2100270028002900

2100270028002900

2100270028002900

ProductDescription

ASME BPE ThreePiece Ball Valve,Bottom Entry and

Side Entry DiverterValve.





AVCO VALVES & CONTROL, INC.3210 S. SUSAN ST.SANTA ANA, CALIFORNIAusA,92704 /ryco

THIS IS PART OFCRN Ø/ jo,fi€.Technical Standards & Safety AuthorityBoilers & Pressure Vessels

Safety Program

15-Dec-16

PAGE 3 OF 3


Note 1: ln all cases the pressure-temperature ratings of the valves may be limited by the seat and seal materials. Consult AVCO literature,

Note 2: ln all cases the pressure-temperature ratings of a flanged valve are limited by the pressure-temperature ratings of the flange

Note 3: Consult factory for valve ratings with buttweld end connections below ASME 816.lOM schedule 10.

Note 4: For valve series I 100, 1 700, 1800, 1900, 9100 and g900 other ASME 816.34 materials may be supplied. When this is the case the pressure.temperature ratings of the valves are in accordance with the applicable ASME 816.34 Table 2 ratings.

Note 5: For valve series 1 100, I 700, 1800, 1900, 9100 and 9900 the pressure-temperature ratings above 100F are in accordance with the applicableASME 816.34 Table2 ratlngs.

Note 6: The assembly clamp is not part of the CRN. Pressure-Temperature ratings may be limited by the clamp type used in the joint assemblyConsult Clamp Manrrfacturer for clamp Pressure-Temperature ratings.

Note 7: Above 100F the pressure-temperature ratings of tube end valves are to be calculated in accordance with para. 304.1 of ASME 831.3.

MDMT(F)

-20

MAWP(psis)Saze 112" thru 1"1500 psig at 100FSize 1-112"1000 psig at 100FSize 2"850 psig at 100FSize2-112"700 psig at 100FSize 3'550 psig at 100FSize 4"550 osiq at 100F

MaterialSpecificationASTM 4351-CN7M Alloy 20ASTM 4494-M35-1 Monel 400

End Gonnection(Note l.2lTube End, Sizes 1/2"thru 3": 0.065" wall


BodyClass

N/A

Size Range

112" thru 4"

DesignGode


AVCOSeries

2100270028002900

ProductDescription



;902-368-5526

UNIFORM STATUIOR.V DECLARATION FORM FOR tHE REGISTRATION OF FITTING DESIGNS

NEW 61\UNSWICK NUNAVUT

MANUFACTURERS NAME:

.MANUFACTURERS ADDRESS:

pt.A~ LOCATIONS:

NOVA SCOTIA YUKON

PRINCe EDWARD ISlAND NORTHWEST TERRITQRII:S

AVCO VALVES & CONTROL, INC,

3210 S. SUSAN ST., SANTA ANA, CA, 92704

SAME AS ABOVE !i:~IIi~QB! OE Ellli~!;Z~ IQ BE B501SI§B~I2· Clf!C~g Qt!E CATS.GO!r( Qt!!,V·

A P!po. nttlngs, Including coupU,g.s, lee~. elbows, Vs, plugs, unions, pipe caps, or roiluclltl e Flanges: ·au nanga, ©Valves: all line valvo.s D Ex'panalon Joints, nexlbte connacllons, and ho~e assomblles: ott typos E Stralnot3, nltecs, sapatators, and steam traps F Meuurlng dovtc:es,lneludlnri prossuro gaug"~' level gaugos, &lght gtasso1,1avet~. or

pro~ aura transmlllers G Co~IOod capacltY·IIlted prossuro rollol devices acceplablo u primary ovar preuuro prolocllon on

.boller:t, pnuauro ve•nola, piping and fuslbla plugs H P~~·sure retaining c:ornponents that do not fall Into one of the above cstogorll!s N Nuclear components; Glass 1 0 Class 2 C Class 3 0, (Meeting CNSC or ASME iequlrernents)

• SHOW MMIUFACTURE1RS NAME TRADEMARK. OR lOG • AS 'WIL APPEAR ON THe PROD C

Qvco LIST OF I'll GDOC IMI AND IDENT FICATION OF THE ACT lA\. lTEMS TC' ee

·SCOPE OF CRN REGISTRATION, DESIGN REPORTS, DRAWINGS, CALCULATIONS

. DECLARATION:

NEWFOUNOI.ANO ANO \.ABAAOOR

lll.ii • . IQN.

• ASME B16.34 ·ASMEB31.3

i~ POAO!D~ We\.IIEQ ~ WROUCI1T fl( C:AST Ol'IIER Oa&CRIII OTHtll;

# 2/ 14

I MA~KWEINER."CI:;O llteMte3J employed by AVCOVALVES & CONTROL and ~elng tho porson.havlng full authority and resppnslbillty for \he quality or the end product do solemnly dactarolhal the ,lnformallon. contained In this form 1.& true and to the bosl of my .~nowlo~ge repre~ents t.h!-! product forwhlc!i regl~traUon .Is sought. The.dimf!!lSICio.s.malerrats of construction, prossure tampcrall!re raU.ng&, andJdon~IOcallon markings .are In accordance with tl)e her~ln 11a~ed standards, 1. further declare t~al t~e manufacture of these fittings Is re·gulated by a Qtiall\y Control Prog~m whiCh extends touch plant where fabrication occurs In whole or In part and has been voriOed by IS0:9001 :2015 ANAB ~s being suitable fo( !ha~ purpose end I mal<e I his solomo declaration con:sclenllo ;"believing llto be true, and knowing lh3llt 111 of lha senie force and affect as If made under 03lh.

Slgnatur!'l of ~ecloror: . ~ • ·

Declared before me at USE'rHt·~-l SPt,,~!! r-~,.·

This day or __ ........ ___ AD-~--- 0 F F I ( I /I. ~ :~ ,. :. :

Commissioner of Oaths or Notary Pubilc: (sign)-------------

This space for Rogulatory Authority use This registration musl be revalidated aflor ten (10) years ftom the dale of acceptance,

CRN: _O_C_19_0_5_S_. _5 _

FlO#: _1_5_4_1_6 ---

No! as: 1. All fittioge shall be rBglslered In lha name orthe Manura~lurar. 2. Each category shall be supported with lwo Statutory Declaration terms ilnd ono copy of aupportln9 documentation. ~. Tho declaration eMil ba m11de by the person having lull authority and raspcn1lblllly for lha quality ollhe end producL 4. Quality control program' ahall bo resubmillod lor valldallon at a m11xlmum Interval of five (5} ye3rs.

ACCEI'TED PROVINCE OFl'lUNCE 'EDWARD ISLAND coMMUN'fl'lES, WID & BNVllU)NMEN'l'

C.ll.N. _ o c. \ C\ b 5 S • 5 't DATE: ~4= t; A0'"'1

19024288770 Labour &Advanced Education 03:52:35 p.m. 02-09-2017

UNIFORM STATUTORY DECLARATION FORM FOR THE REGISTRATION OF FITIING DESIGNS

NEW BRUNSWICK NUNAVUT

MANUFACTURERS NAME:

MANUFACTURERS ADDRESS:

PlANT LOCATIONS:

NOVA SCOTIA YUKON

I'RINCE EDWARD ISlAND NORTHWEST TERRITORIES

AVCO VALVES & CONTROL, INC.


SAME AS ABOVE C~!!;GORY DE EtniNGS TO BE BEGIST§BED, CIRC~E ONE C6!EGORV ON~Y ·

A P!pe Rtllngs, Including couplings, lees, elbows, Ys, plugs, unions, pipe capa, or reducers B Flange•: all flanges © Valves: allllria valves . D Expansion Joints, ftaltlble connections, and hose assemblies: alllypes E Strainers, filters, separators, and steam traps F Measuring devices, Including pressure gauges, laval gauges, alghl glasses, levels, or

pressure transmitters 0 Cartiqed capacity-rated pressure relief devices accaptabla as primary over pressure protection on

boilers, pressure vessels, piping and luslbla plugs H P(essura relalrilng ccimpcirianls that do not fall !nto one of the above categories

NEWFOUNDlAND AND lABRADOR

11TlE OF THE !!TANQ(\RO QF CONSTRUCTION

• ASME 916.34 ·ASME 631.3

N Nuclear components: Class 1 0 Clas~ 2 0 Class 3 Cl, (Mealing CNSC or ASME requirements)

SHOW MANUFACTURERS NAME rRADEMARK. OR LOGO AS_lT WILL APPEAR ON THE PRODUCT DPE OF CDtlSTRUCTIQ.!:I

Q.VCO FOliOED~ W!LDEO 0( W~OUGHT D( CAST .Olltl!l\ C DESCRIBE OTIII!R:

LIST.OF SUPPORTING DOCUMENTATION AND IDENTIFICATION ~F THE A~TUAL ITEMS !0 BE BEGIS!ERED;

·SCOPE OF CRN REGISTRATION, DESIGN REPORTS, DRAWINGS, CALCULATIONS

. DECLARATION: j MARK WEINER." CEO 1iaa no1o11 employed by AVCO VALVES & CONTROL and ~elng the person havlrig full auihority and responsibility ror \he qua lily or the end product do sol~mnly declare that the .lnform!Jtlori contained In this form I~ \rue and to the best of my knowledgE! represents lh~ prQduct for which regl~lration is sought. Toe ~dl~!!!!lSI~ns, rn~!erlals _of CQnstruclton, pressure temperature ratings, and ld~ntl~c~tlon marking!! .1\re In accordance with the herein n~IT\ed standard~. I f~rlher declare that the manufacture of these 'fittings Is regulated by a Qtiallly Control Program which extends to each plant where fabrication occurs In whole or'ln part and has been VfilrlOed by 150:9001:2015 ANAB es being suitable for that purpose end I make this solemn declaration consclenllo · bellevh1g lllo be true, and knowhig \hal Ills of ihe same force and effect as If made under oath.

Signature of ~~clarer: .... ·lt..!.rt.J~~~.L:.~~~-----Declared before me at

This ____ day of------ AD-----

Commissioner of Oaths or Notary Public: (sign)------------

eRN: _o..:...c 1_9_o_s_5_. 5 __

FlO#: _1_54_1_6 __ _

Notes: 1. All fittings shall be registered In the name ol the Manufacturer. 2. Each category shall be supported Vlllh lwo Statutory Declaration lorms and on11 copy ol supporting documentallan. 3. The declaration shall be made by lhe person having lull authority and rasp on slblllly for lhe quality altha end product. 4. Quality control programs shall be resubmitted lor~alldallon ala maximum Interval ollive (5) years.

U S 1.: T H I S S P r\ ·~ !:. r- '·' orFI(Ir'l.."~r:.l

8/36

UNIFORM STATUTORY DECLARATION FORM FOR THE REGISTRATION OF FITTING DESIGNS

NEW BRUNSWICK NUNAVUT.

NOVA SCOTIA YUKON

PRINCE EDWARD iSLAND NORTHWEST TERRITORIES

NEWFOUNDLAND AND LABRADOR

MANUFAcTURERS NAME: AVCO VALVES & CONTROL, INC.

MANUFACTURERS ADQRESS: 3210 S. SUSAN ST., SANTA ANA, CA, 92704

PLANT LocAtioNs: SAME AS ABOVE CATEGORY OF F!TTI~GS TO BE REGISTERED.· CIRCLE ONE CATEG()RY ONLY· . TITLE OF THE STANDARD OF CONSTRUCTION

A Pipe fittings, including couplings, tees, elbows, Vs, plugs, unions, pipe caps, orreCiucers - ASME 816.34 B Flanges: all flanges @ Valves:. ali line 11aives . . . . - ASME B31.3

D Expansion joints, flexible connections, and hose assemblies: all types E Strainers; filters, separators, and steain traps F Measuring devices, including pressure gauges, level gauges, sight glasses, leveis, or

pressure transmitters · G Certme~ capacit)i-i'ated pressure relief devices acceptable as primary over pressure protection on

boilers, pressure VE!SS.:,Is, piping and fusible plugs H PtessLire retaliii~g con1p~nlliils thatdo iiot fall !nto one of the 11bove categories N Nuclear coinpoiierits: Plass 1 D. Clas~ 2 0 Class 3D, (Meeting CNSC or ASMf: rj!qLiireinents)

SHOW MANUFACTURERS NAME TRADEMARK. OR LOGO AS IT WILL APPEAR ON THE PRODUCT !!Pii OF CQN~TB!J~TjQN

(AVC{l' FOliOED~ WELDED IX WROUGHT ~ C~ST OTHER. 0 .DESCRIBE Ol:HER:

·~ .. ·· ... · .. .

LIST. OF SU~PORTING DOCUMENTATION AND IDENTIFICATION OF THE ACTUAL.ITEMS TO BE REGISTERED:

-SCOPE OF CRN REGISTRATION, DESIGN REPORTS, DRAWINGS, CALCULATIONS

DECLARATIO~: j MARK WEINER. CEO 1sea note3J employed by AVCO VALVES & CONTROL and beinQ the person having full ~Uthority and respp\isibility for the quality of the en(t produCt do. sol~mnly declare 'that theJnform~tiori eon.alried in ttiis'forrit 'is tiue ari<:l to'the best or my ~nowiE~dS!e represent~ Jhe p_rocjuct for wllich regi~tration is sought. The dimensions. rni!ltedal~ of e()n!ltruqion, pressure tem.peratllre ratings, ariel Jd~ntm~tion markings ~re in a¢cordarice With the herein' 11a[iled s(anclard~ .. l (~rther ~ecl;are that the manufacture of these fittings Is teglllated by a Quality Control Program whiCh ~~ends to 'each plaht where fabrication occurs in whole ori11 par:t and has been vf:!iified by IS0:9001:2015 ANAB as being st.Jitabte forthat purp(>se and 1 make this solemn declaration consdentio · · l>eiieving it to be tr~e~ arid knowing that it is otthe same force and effect as if made under oath.

Signature of Decl;:.rer~ Declared before me at

This.~ ___ day of _______ AD------

Commissioner of Oaths or Notary Public: (sign)_· --------------

Thjs space for Regulatory Authority use T

CRN:

FID#:

This registration must be revalidated after ten (10) years from ta£$11..-tlllA'f~V

oc19oss.s CIUI (J;:::IqoSS.S+_

15416 -=-~ · for

Notes: 1, Ail fittings shall be registered in the name of.the Manufacturer. 2. Eachc:~tegc:;ry shiill be supported with two Statuiory Declaration forms ;~nd one copy of supportil19 doc.;.mentation. 3. The declaration shall be inade by the person having full authority and responsibility for the quality of the end product. 4. 'Quality control programs shall be resubmitted forvalidalion at a maximum interval of five (5) years.

CHI£F BOILER lt.a.we<:TOR

o}(T!:d /lo /Jo/1-o 8LRs 0


NEW BRUNSWICK IM-lAVUT

MANUFACTURERS NAME:

MANUFACTURe;RS ADDRESS:

PLANT LOCATIONS:

NOVA SCOTIA YUKON

PRINCE EDWARD ISLAND NORTHWEST TERRITORIES

AVCOVN.VES & CONTROL, INC.


SAME AS ABOVE C6JEgORX Qf Elllii:!QS !Q BE B§G §TI:iB!a!, CIB!;Il.!i ONE Cti!§!:ZQBV Qt!L V

A P!pa fillings, Including coupUngs, tees, elbows, Ys, plugs, unions, pips caps, or reducers B Flanges: allllanges @Valves: all line valves D Expansion }olnh~o, nelCible connections, and hose assemblies: all types E Sl111lners, filtetrs, teparators, and steam traps F Meuvrlng devices, Including pressure gaugn,level gauges, atghlglasses,tevels, or

pressure llansmltters tl Certified capaclty·ratad pressure relief devices accaplable u primary over pressure protecllon on

boUers, pressure veasels, piping and fusible plugs H Pressure retaining components that do not fall into one of the above categories N Nuclear components: Class 1 Cl Class 2 0 Class 3 0, (Meeting CNSC or ASME requirements)

SHOW MANUFAC UR!<RS NAM!;. T !.lhi=MA AIC OR LOGO AS IT WILl. APPEAR ON THE bann11r


ll F F

• ASME 616.34 ·ASMEB31.3

lf!Y&IlO!i

ION

fORQIIO~ YIELD~!) 0( WROUQHT X . Qvco CAST OTHER 0 DESCRI8 DTIIER.

LIST OF SUPPOJUINQ OOCUMENTAIION AND IDElfiiFICATION QF THE; ACTUAL ITEMS TO B§ REGISTERED;

• SCOPE OF CRN REGISTRATION, DESIGN REPORTS, DRAWINGS, CALCULATIONS

.

DECLARATION: l MARKVVEINER,-CEO rs .. nc~• ~)employed by AVCO VN.VES & CONTROL and belng lhe person having full authority and responsibility for the quality of the end product do solemnly declare that the Information contained In this form Is true and to the best or my knowledge represents the prO<Juct for which registration is sought. The. ~lm~l)sions, ma·lerlals of construction, pressure temperature raUngs, and ldentiOcatlon markings are In accordance wltt"l the herein named standards. I further qeclare that the manufacture of these fittings \$ regulated by a Qliallly Corilrol Program which extends lo each plant where fabrication occurs In whole or In part and has been verified by IS0;9001:2016ANAB as being suitable for thai purpose and I make this solemn dedanolloo cooscleon~= U to bolt\Jo, and koowtog that U lo of the oamo force alld effect as If m ... ullder oo1h.

Signature of Declarer: ~ ~ Declared before me at U S l: T 1-1 I S $ P ."1 '· \:. I' ~ •

This dayof ______ AD ____ _ 0 f F I (. I ,'1. 1• ·~ ,. :. •

Commissioner of Oaths or Notary Public: (sign)-------------

This spaco lor Regulatory Authority use This reglstraUon must be revalidated after ten (10) years from the date>of acceplance.c:f2

eRN·. __ o_c_l_9_o_s_s_._s__ MewfO:~~~n~ LclnU<lor

FlO#: 15416 SorviceNL

Noles; 1. All fittings shall be registered In the name olthe Manufacturer. 2. Each calagcry shall be supported wllh lwo Slalulory Oeclarallon forms and one copy or supporting dotl.lmentallcn. 3. lhe dectaraUon shaU be made by lhe person having full authority and responsibility lor !he quallly of lhe end product. 4. Oual\ty control programs shall be resubmitted lor validation at a maximum Interval ol five (5) years.

R e.g l~t!ft!d ....._.~-~.:F-,_.:;..,;::;;-..;...;:;

Regtstcred · r.z.~~~;;b:::;;--j-~IDER THE AUTHOR'

1\HkiC SAFI':TY .·.C N THE SOllER PRESSURE - MID

COI.l?P.rs:iCUJm.ll Fmln9S~ 0612ooJ



MANUFACTURERS NAME:

MANUFACTURE:"RS ADDRESS:

PLANT LOCATIONS:

NOVA SCOTIA YUKON

PRINCE EDWARD iSLAND NORTHWEST TERRITORIES



SAME AS ABOVE CATEGORY OF FITTINGS TO BE REGISTERED.· CIRCLE ONE CATEGORY ONLY·

A P!pa fittings, Including couplings, tees, elbows, Ys, plugs, unions, pipe caps, or reducers B Flanges: all flanges ©Valves: all line valves D Expansion Joints, flexible connections, and hose assemblies: all types E Strainers, filters, separators, .and steam traps F Measuring devices, Including pressure gauges, level gauges, sight glasses, levels, or

pressure transmitters G Certified capacity-rated pressure relief devices acceptable as primary over pressure protection on

boilers, pressure vessels, piping and fusible plugs H P~essure retaining compo'rients .that do not fall !nto one of the above categories


TIThE QF Tlj~ STANDARD QF CONSTRUCT!Q~

• ASME 816.34 • ASME 831.3

N Nuclear components: Class 1 0 Class 2 0 Class 3 0, (Meeting CNSC or ASME requirements)

SHOW MANUFACTURERS NAME TRADEMARK OR LOGO ASJT WILL APPEAR ON THE PRODUCT J:XPE OF CQNSJ.B.Yla!P.!i

<Avco FORGED~ WELDED !>(WROUGHT~ CAST OTHER 0 DESCRIBE OTHER:

.. ..

LIST OF SUPPORTING DOCUMENTATION AND IDENTIFICATION OF THE ACTUAL ITEMS TO BE REGISTERED;


.

DECLARATION: I MARK WEINER." CEO (seo note 31 employed by AVCO VALVES & CONTROL and ~ein~ the person having full authority and responsibility for the quality of the end product do soiem·nty declare that the ,lnform11tlon contained In this form Is true and to the best of my knowledge represents 1he product for which registration is sought. The dime~nsions, rnaterfals of construction, pressure temperature ratings, and identification markings ~:~re In accordance with the herein named. standards. I further elect are that the manufacture of these fittings is regulated by a Quality Control Program which extends to each plant where fabrication occurs in whole orin part and has been v~i'ified by IS0:9001:2015 ANA8 as being suitable for that purpose and I make this solemn declaration conscientio · believing It to be true, and knowing that It Is of the same force and effect as If made under oath.

Signature of Declarer: (A/2 Declared before me at u s t: r H 1 s s P r; .: 1:. r ! ,

This day of _______ AD _____ . 0 F F I C I ,, !. :·: ,. :.

Commissioner of Oaths or Notary Public: (sign)---------,.--------

This space for Regulatory Authority use This registration must be revalidated after ten (10) years from the date of acceptance.

CRN: _O_C_l 9_0_5_5_._5 __

FID#: _1_5_4_1_6 ___ _

Notes: 1, All fittings shall be registered In the name of the Manufacturer. 2. Each category shall be supported with two Statutory Declaration forms and one copy of supporting documentation. 3. The declaration shall be made by the p'erson having full authority and responsibility for the quality of the end product. 4. Quality control programs shall be resubmitted for validation at a maximum interval of five (5) years. · Sect. 1.0 ·Fillings Rev. 1 06/2003

UNIF?R¥ STA"fUTORY OECLA~TIONFOR.M FOB THE REGISTRATION dE FITTING DESIGNS


NOVA SCOTIA YUKON

PRINCE EDWARD ISLAND NOR"'fHWEST TERRITOFUES

MANUFACTURERS NAME; AVCO VN...VES & CONTROL, INC.

MANUFACTURERS AOORESS: 3210 S. SUSAN ST., SANTA ANA, CA, 92704

PLANT LOCATIONS: ·' ~.AME AS ABOVE

:ATEGORY DF : TC BE REGIS rERED CIRC E ONE C ON V' ..... A Plpo lllllnga, 1!'1Clu~lng couplings, tees, elbows, Y;, plug5, unions, pipe c~pG, or roduc'ora e Flaoge:s: all nange, © V111ve;: ell Rrio valva& b Exponsion Joints, 'nexlbte eonna·cllons, ancf ho$o as&emblles: alllype3 E Slrolnors, nltlliS, separators, ond ataam lrapa F Moaa'urlng device~, Including pressure gaugo5, level g~ugc&, sight gla~ses, levels, or

pressuro transmlllors G Cor110ed copoclt~NDlacl pres!luro rollof dovlcee oc;cept~blo B3 primary ovar prusuro protacllon on

bollol31 pressure v~::.::o~a. P,lplng and fuslbl9 pluga H P(euurG retaining corn~ononls that do not fall Into one of the above categotl~& N Nuclear components: :Class 1 0 Class 2 0 Clus:~ 3 0, (MaaUng CNSC or A.SME iequlroments)

NEWFOUNDLANO AND I.ABAAOOR

IT

·ASME 616.34 ·ASME 631.3

lS.!iOWMANUFACTUIU!RS NAME<. TRADEMARK. OR ~AS IUl!ll.!. APP568 Qf:! !H§ PROD!.!S:I

ION

. . . :Iai,&DQii

Q.Vco FCROeO~ W!!LDEO C( WROUOHl ~

' CA3T OTHeR 0 D!!~CRIIile OTHCA;

. . .. LIST OF SUPfOBTING QOCU't'EN!ATION AND IOENTIFICA.!ION OF Ttl~ ACTUI)~ ITEM§ TO B.E BEGJS,li!REDl


DECLARATION; I MARK WEINER. CEO tin IIQtt ~I employed by AVCO VALVES & CONTROL sni:l ~cl.ng ihe person hUvlng full aulhorlly and responsibility for the qua lily of tho enc! product do solemnly declaro.thetthe lllformiltlori.containEid.ln tlils'rorin I& true ilrid to the best or my knowlo~ge repres·ants lh~ prQ~Uc! f~r W~icn regl~lratlon )s sough!. rhe ~lm.Qnslons, lt1~'~r!als 9r cons\tUe\l~n, pressure temperal~rt~ ratings, aiJd ld~n!!qc~l!on m.arklng~ ~reIn accordance with lhe har~ln na!f1ed. s.\andard~.l further ~eel are \hat !he manul.,eture of these fittings. Is tegula\ed by a Quallly Corilrol Program whlcl'! extends to ea~h plallt where fabrication occurs In whole or In part and has ber;:n verlned by 180:9001:2015 ANAB as being suitable for !hal purposa end I make this solemn declaration eo~seloriu~:: II to be lrue, and knowing thalli Is of the same Ioree end effect as If made under oath.

Signature ofD\'elaror: ~ ~ Declared before me at This dayof ______ AD ____ _


U S E: T H I S \-) I, t, ,; ~- F I'•

0 I~ F I ( I ,\ t :·: ,. :. 1

This spaca tor Regulatory Authority uae /' ~ , ,. This reglslrallon muat be revalidated after ten (10) years from tbe dale or aecepta "¢~st.

1 Nor! w-., 0Cl9055 5 / TQ:rt~ton~

eRN:__:::....:...::...:._::_..~·-- REGISTERED

FlO#: 15416 UNDE.R THE AUTHORE~i~~ T'·IE BOILER AND PR

Nola:~: 1. All filling~ .shall bo roglstored In lho name ol lhe Manulacluror. 2. Each category ohall be 9Upponod wllh two Statutory Oeclaralion forms and ono copy of auppottlng doeumenlsllon. 3. The declaration shall bJI m<~de by !he per~ on having fuO aulhotlly and re~pon~lblllly lor lhe qua lily of tho ond product 4, Quallly control progr:~ms shall be rasubmitle!S for validation e\ o maxlrnum lnterv::il of five (5) yeers.

U' I 1.7. it /I.I.M/ll/QQ~ 18JlU8"1 1"1\-1'01

\ I VESSEL ACT- ..r

\ ~;~ Qfl'l(!ft.,-.0

{E:~-~~. 1.0 • Fll ev. 1 0612003

•!11(\J.J' "'0•07 1 /l_ar\_7(\

I I

I I

UNIFORM STATUTORY DECLARATION FORM FOR THE REGISTRATION OF FITTlNG DESIGNS . . . .


MANUFACTURERS NAME:

.MANUFACTURERS. ADDRESS:

.PLANT LOCATIONS:

NOVA SCOTIA YUKON

PRINCE EDWARD ISlAND NORl_"HWEST TERRITORIES


3210 S. SUSAN ST., SANTA ANA, CA. 92704

SAME AS M30VE CATEG()RY OF FITTINGS TO BE REGISTEREq. CIRCLE ONE CATEGORY ONLY·

A Ptpe fittings, Including couplings, l$es, elbows, Ys, plugs, unions, pipe caps, or reduears B Flanges: all flanges ©Valves: all line valyes 0 Expansion Joints, ·nexlble connections, and hose assemblies: all types E Strainers, filters, separators, and steam traps F Measuring devices, Including pressure· gauges, level gauges, sight glasses, levels, or

pressure transmitters G Cer\lf!ed capacity-rated pressure relief devices acceptable as primary over pressure protection on

bollel$, pressure vessels, piping and fusible plugs H P(essure retaining components that cjo not fall Into one of the above categories


TlHE OF JH§ STAHDARO OF CONSIRUCTION

- ASME 816.34 - ASME 831."3

N Nuclear components: Class 1 D Cla_s~ 2 D Class 3 0, (Meeting CNSC or,ASME requirements)

SHOW MANUFACTURERS NAME TRADEMARK OR OGO AS IT Wlt L APPEAR ON THE PRODUCT JYPE OF COI<.!ii~

FORGED~ WELDED 0( WROUGHT X

Q.vco CAST ,OlliE~ 0 DESCRIBE OTHER: .

.. LIST OF SUPPORTING DOCUMENTATION AND IDENTIFICATION OF THE ACTUAL ITEMS TO BE REGISTERED;

-SCOPE OF CRN REGISTRATION, DESIGN REPORTS, DRAWINGS, CALCULATIONS

DECLARATION: I MARKINEINER:CcO (seono~e3J employed by AVCOVALVES & CONTROL and !;lelng the person having full authority and responsibility for the qu·auty"of the end product do solemnly declare that the .lnformalioh.contained.ln this form i.s true bnd to the best or my knC)wledge represents the prc;>duct for w~lch regi~tration i~ sought. The 'dlm~l"\slons, m<~lerfals of construction, press-ure temperature ratings, ar:td _lden!lf!cation m_arklngs are In accordance with the herein 11amedstandar~s.t f~uther c!eclare t)lat the manufacture of these fittings_ Is regulated by a Quality Control Program which extends to each plaht where fabrication occurs In whole or in part and has been verified by 180:9001:2015 ANA8 as being suitable for !hat purpo~e and I make this solemn declaration co~scienti~ It to be true, and knowing that It is of the same force and effect as if made under oath.

Signature of Declarer: c4 . Declared before rne at U S t: T H \ S S P ,; ·~ !:. I~ ! •

Thls ____ dayof ______ AD ____ _ 0 F F 1 ( I .~ !.. :~ I" :.


This space for Regulatory Auth?rity use t\.1 U This registration must be revalidated after ten (10) years from the ~ate of accepfa~ce.

\

ll " ,:J. . Botlers and cRN:_~o~c_1_9_os_s_. s__ '-.'·:: ".'·.· .. .?~t. p e'"'·~··r"' ·v·essels Act i\U.,'\U r.::--vU'o ~·

FlO#; 15416 REG\STERED

Notes: · "! 0~\ oss.sN .}:

1. All fillings .shall be registered In the name of the Manufacturer. 2. Each category shall be supported with two Statutory Declaration forms and one copy of supporting documentation.

.:e -~~e..~b~t o::::.J...:, d;s,;(l..;..\ 1-~---~ 3. The declaration shall be made by the person having full authority and responsibility lor the quality of the end product. 4. Qualily control programs shall be resubmitted for validation at a maximum Interval of five (5) years.

OC/ 9&..55,5 - Avcovalve...Email:[email protected] The design submission, tracking number...

Documents

Transcript of OC/ 9&..55,5 - Avcovalve...Email:[email protected] The design submission, tracking number...