OBZOR Production Cooperative Zlin 5 D F W O D AR R ... switch Obzor... · With the transfer of...
Transcript of OBZOR Production Cooperative Zlin 5 D F W O D AR R ... switch Obzor... · With the transfer of...
Production Cooperative Zlin
Na Slanici 378764 13 Zlín - Louky
Czech Republic
Phone: +420 577 195 138Fax: +420 577 195 152
E-mail: [email protected]
www.obzorzlin.com
CAMSWITCHES
Rev
isio
n 0
8/2
01
5. S
ub
ject
to
mo
dif
i cat
ion
s.
OBZORProduction Cooperative Zlin
OBZOR is a stable and reliable supplierof products and services since 1965.
Traditional Czech producer of cam switches, house switches and sockets and other electrical accessories.
A major supplier of plastic components for Automotive industry. The company has excellent machinery, also
off ers product assembly cooperation.Employer of physically challenged people.
The aim of the company is to constantly improve the quality, declared by following certifi cates: CSN EN
ISO 9001:2009 and ISO 14001:2005.
EXTEND
ED W
ARRANTY PERIOD FOR VSN AND VSR
5YEARS
Tradition since 1965
Suitable for safe disconnection
OBZOR Zlin ... for 50 years always within reach
Production Cooperative was established fifty years ago. During this time, OBZOR Zlin has ranked among top producers and distributors of small electromechanical products, automotive parts, metal parts, injection-molded plastic parts and gasket segments.
With the transfer of production of cam switches from the national company SVA in Kutna Hora followed by purchase of license for French BACO cam switches in 1970, the company expanded with developers, toolmakers, designers and other professionals and in 1972 started to produce own VS line of cam switches. The biggest customers were national company ROMO Fulnek and TATRAMAT Poprad. Since 1995, OBZOR became an exclusive representative of Austrian cam switch producer Kraus + Naimer (6 - 2000 A) for Czech Republic and Slovakia. In 2009, the original VS series were upgraded and replaced by a new range of VSN 10 A - 150 A and VSR 10 A - 20 A. Since 2014, VSN series expanded to 250 A. All OBZOR cam switches comply with standard EN 60947-3, Art. 2.3 for safe disconnection, so they can be used as well as disconnectors (designated both on the switch body and the front label).
At present, the Cooperative has its plants in Zlin, Uherske Hradiste, Olomouc and Sumperk, together employing approximately 260 workers. Company‘s portfolio also includes medical products, mostly pill organizers and dental boxes. Since 2003 began production of house switches and sockets.
Our goal is to constantly improve the quality of products and therefore in 1997 we achieved quality system certification according to DIN EN ISO 9001:1995, in 2000 followed by quality management system according to DIN EN ISO 9002 and currently has certificates according to DIN EN ISO 9001: 2009 and ISO 14001: 2005.
Camswitches
House electroinstallation
Medical products
Injection molding
Engineering services
Otherservices
NEXT GENERATION CAM SWITCHES - VSN, VSR
As purely Czech manufacturer of cam switches with more than 50-year tradition in switches production, we launched the new VSN and VSR product line in 2009.The product line design has been based on reli-able and time-tested technical solutions of the previous VS product line.
Comparing to the previous VS line, the VSN and
VSR product lines off er:
wider range of amperages
new type of back mounting panel, allowing for
mounting the switch both using screws and
to a DIN batten
higher nominal voltage and current values
higher mechanical and electrical endurance values
IP20 as a standard protection of connecting
terminals and IP65 on the front side
modern design of control elements, front
panels and new protection covers
square-shaped switch body (former circle-shaped
VS switches)
facile access when connecting conductors into the
switch terminals thanks to inclined terminals
of VSN 10 - VSN 20 switches
suitable for safe disconnection
5-year warranty for VSN and VSR switches!
(for VSN and VSR switches delivered after
1. 1. 2011)
All types of extensions and accessories of the originalVS product line are supplied in a new design of VSN andVSR product lines, therefore all individual requirementsof customers can be accommodated.
The original VS product line was replaced with VSR or VSN cam switches in 2011. However we have available spare parts and accessories for VS 10-16-25-32-63-100: control elements and front panels, locks, rear fi tting panel for DIN rail and protection covers. Only while stock lasts.
OBZOR, Production Cooperative Zlin, Na Slanici 378, 764 13 Zlín, Czech RepublicTel.No. 577 195 138, fax No. 577 195 152, www.obzorzlin.com, [email protected]
VSN 10 - 16 - 20
VSN 25 - 32
VSR 10 - 16 - 20
VSN 40 - 63 - 75
VSN 80 - 100 - 125 - 150 VSN 250
Shaft sealingIP65 in standard model
New front panel andcontroller design
3
VSN 10 - 16 - 20 7
VSR 10 - 16 - 20 10
VSN 25 - 32 15
VSN 40 - 63 - 75 17
VSN 80 - 100 - 125 - 150 19
VSN 250 21
Accessories and special models 23
Protection covers 26
Control elements and front panels 27
Cam switch diagrams 32
0
12
4
8
10
2
6
11 -
3 -
7 -
9 -
1 -
5 -
Content
4
The difference between VSN and VSR 10-20 is in terminals.VSR 10-20 terminals are horizontally with the axis of the switch, the screws are tightened perpendicularly to the axis.VSN 10-20 terminals are askew to the axis of the switch, the screws are tightened at an angle of approx. 45°Technical parametres are identical.VSN 25-150 terminals are horizontally with the axis of the switch, the screws are tightened perpendicularly to the axis.
Technical support:Tel.: +420 577 195 138, e-mail: [email protected]
*switches in K1, K2, SKN and SKV covers are always designed for back mounting - Z
V S N - X X X X X X X X A X - V - X X X
amperage (type series) - switching diagram + angle(switching program) - mounting
method - front panel
VSR 10VSR 16VSR 20VSN 10VSN 16VSN 20VSN 25VSN 32VSN 40VSN 63VSN 75VSN 80VSN 100VSN 125VSN 150VSN 250
XXXX4-digit scheme is for standard types
according to catalogue(chosen by customer)
XXXXXXXX8-digit scheme is assigned by
manufacturer, used for custom made switch schemes.
AXSwitching angle is a variable
value chosen by customerfrom scheme list.
Vbuilt-in, panel mounted
*Zback mounting, using screwsor DIN rail
V22central mounting in a 22,5mm diameter hole, switchcontrolled by:- controller (lever) - key
ANCsmall front panel 50x50 (black)
ANZsmall front panel 50x50 (yellow)
PNCmedium front panel 66x66 (black)
PNZmedium front panel 66x66 (yellow)
HNClarge front panel 84x84 (black)
HNZlarge front panel 84x84 (yellow)
Cam switch specification
DIN RAILPANEL thickness 1 - 5 mm lockable extension
NVZ1X, NVZ2X, NVZ3X
PANEL
BZ, EZfront panel ANX, PNX, HNX
controller, leverNMX, NSX, NOX, KSX, KOX, ZSX
5
- S X X X - X X X - X X X X X -
- label designation - controller - accessories - covers
S001-999defi ned by producer- label designation according to switch position
SPECdefi ned by customer- custom label designation
NMRarrow small red
NMSarrow small grey
NMCarrow small black
NSRarrow mid-size red
NSSarrow mid-size grey
NSCarrow mid-size black
NORarrow large red
NOSarrow large grey
NOCarrow large black
KSRlever mid-size red
KSSlever mid-size grey
KSClever mid-size black
KORlever large red
KOSlever large grey
KOClever large black
ZSRlockable arrow red
ZSSlockable arrow grey
ZSClockable arrow
OK4VSR 10-20 up to 4 levels
OK6VSR 10-20 up to 6 levels
OKVVSR 10-20 up to 6 levels
K1CSVSN 10-20 up to 4 levels
K1DMVSN 10-20 up to 3 levels
K1DVVSN 10-20 up to 6 levels
K2CMVSN 25-75 up to 2 levels
K2CSVSN 25-75 up to 4 levels
K2CVVSN 25-75 up to 6 levels
K2DMVSN 25-75 up to 3 levels
K2DVVSN 25-75 up to 6 levels
SKNVSN 80-150 up to 4 levels
SKVVSN 250
K2Jcover with circuit breakerVSN 10-75
K2Pcover with fuse switchVSN 10-32
K2PB0cover with hole for fuse switch VSN 10-75
K2Zcover with socket (4 or 5 pin) VSN 10-32
K2Rcover with inlet (4 of 5 pin)VSN 10-32
K2XXSGcover with indicator
NOTE:Covers suppliedwith/without PG outlets.
LOCKABLE EXTENSION
NVZ1Rmid-size 66x66 forVSN(R) 10-20 red controller
NVZ1Smid-size 66x66 forVSN(R) 10-20 grey controller
NVZ1Cmid-size 66x66 forVSN(R) 10-20 black controller
NVZ3Rmid-size 66x66 forVSN(R) 25-150 red controller
NVZ3Smid-size 66x66 forVSN(R) 25-150 grey controller
NVZ3Cmid-size 66x66 forVSN(R) 25-150 black controller
NVZ2Rlarge 84x84 for VSN 25-150 red controller
NVZ2Slarge 84x84 for VSN 25-150 grey controller
NVZ2Clarge 84x84 for VSN 25-150 black controller
BZ - block lock, key can be pulled out only in locked position
EZ - block lock, key can be pulled out also in opened position
REVERSIBLE MECHANISM for VSN(R) 10-20R21, R81, R812, R78, R32,R78, R32, R7832, R8132,R7821
UNIDIRECTIONAL ROTATIONJO - for VSN 10-20
SPLIT CONTROLDO - for VSN(R) 10-150
E - switches mounted in parallel
T - switches mounted in series
6
TV
SN
10
VSR
10
VS
N 1
6
VSR
16
VS
N 2
0
VSR
20
VS
N 2
5 V
SN
32
VS
N 4
0V
SN
63
VS
N 7
5V
SN
80
VS
N 1
00V
SN
125
VS
N 1
50
4 kV
4
kV
4 kV
6
kV
6 kV
6 kV
6 kV
6 kV
6 kV
6 kV
6 kV
6 kV
690
V69
0 V
690
V69
0 V
690
V69
0 V
690
V69
0 V
690
V69
0 V
690
V69
0 V
T15
A
10 A
20 A
16 A
25 A
20 A
30 A
40 A
50 A
70 A
90 A
100
A12
5 A
150
A17
5 A
T10
A16
A20
A25
A32
A40
A63
A75
A80
A10
0 A
125
A15
0 A
40
0/50
0 V
AC
400
/500
V A
C
4
00/5
00 V
AC
4
00/5
00 V
AC
AC
2110
A16
A20
A25
A32
A40
A63
A75
A80
A10
0 A
125
A16
0 A
AC
23
10 A
16 A
20 A
25 A
30 A
35 A
40 A
45 A
50 A
55 A
60 A
65 A
AC
38
A12
A14
A18
A
22 A
25 A
30 A
33 A
35 A
40 A
45 A
50 A
200
A23
0 A
280
A30
0 A
450
A50
0 A
750
A10
00 A
1000
A15
00 A
2000
A25
00 A
Ká
kný
300
A40
0 A
50
0 A
600
A75
0 A
900
A12
00 A
1500
A15
00 A
2000
A25
00 A
3000
A
50
Hz
50
Hz
50
Hz
50 H
z
1 - 4
mm
2
4 -
10 m
m2
10
- 25
mm
2
2
5 - 7
0 m
m2
1
2
12
12
8
1
2
12
12
6
2
4
24
24
12
150
000
100
000
80 0
00 3
70 0
00
60 0
00
40 0
00
30 0
00
10 0
00
15 0
0012
000
6
000
5 00
0
100
000
70 0
00
50 0
00
50 0
00
40 0
00
fr
30 0
00
fr
20 0
006
000
250
000
250
000
250
000
150
000
150
000
100
000
100
000
100
000
100
000
100
000
100
000
100
000
IP
20
IP
20
IP 2
0IP
20
IP 2
0IP
20
IP 2
0
IP
65
IP
65
IP 6
5IP
65
IP 6
5IP
65
IP 6
5
900
8
00
300
2
50
1
20
- 40
/ +55
°C
- 4
0 / +
55 °
C
- 40
/ +55
°C
-
40 /
+55
°C
Nr
Nr
Nr
Nr
1 N
m
3 N
m
3
Nm
4 N
m
30 m
m
30
mm
/ 50
mm
30
mm
/ 50
mm
50 m
m
Mzo
lová
e
10
mm
13
mm
1
3 m
m
20
mm
General technical dataC
am s
wit
ches
tec
hn
ical
dat
a (a
cc. t
o C
SN
EN
60
94
7-3
)
All cam switches meet the requirements of CSN EN 60 947-3, Section 2.3 - disconnectors.
All cam switches can be used for nominal voltage levels of 400 V AC and 500 V AC.
Requirement for application of VSN 10 - VSN 75 in the 500 V AC network must be declared in the order..
Con
duct
or d
iam
eter
in m
m (u
nder
the
scre
w),
only
for C
oppe
r con
duct
ors
VS
N 2
50
6k V
690
V
250
A
250
A
400/
500
V A
C
250
A
100
A
55 A
4000
A
4500
A
50 H
z
lug
conn
ecto
r Ø
12
mm
8 4 8
6 ×
6 m
m
200
for a
ll ca
tego
ries
1 40
0
IP 0
0
IP 6
5
60
- 40
/ +55
°C
any
M12
alle
n sc
rew
- 4
Nm
M12
scr
ew -
14 N
m
153
x 97
mm
50 m
mde
pend
ant
on te
rmin
al lu
g
(poč
et c
yklů
)
�ype
rang
e
Impu
ls w
ithst
and
�ol
tage
(�im
p)
Viso
latio
n �
olta
ge (�
i)
�he
rmal
cur
rent
with
out c
o�er
(Ith
)
�he
rmal
cur
rent
with
co�
er (I
the)
)e�( egatlo� daol-no lani
moN �
orki
ng
curr
ent (
Ie)
Sho
rt-ci
rcui
t sw
itchi
ng c
apac
ity (I
cm)
Sho
rt-te
rm w
ithst
and
curre
nt (I
cw /
1s)
Wor
king
freq
uenc
y
Max
imum
num
ber o
f swi
tchi
ng p
ositio
ns
Max
imum
num
ber o
f lev
els
Max
imum
num
ber o
f con
tact
s
Con
trol s
haft
size
Ele
ctric
al e
ndur
ance
in A
C3
and
AC
23 c
lass
es a
cc.
to C
SN
EN
609
47-3
(num
ber o
f cyc
les)
Mec
hani
cal e
ndur
ance
(num
ber o
f cyc
les)
Pro
tect
ion
of c
amsw
itch
From
Fro
nt
Max
imum
sw
itchi
ng fr
eque
ncy
/ h
Wea
ther
resi
stan
ce
Mou
ntin
g po
sitio
n
Con
nect
ion
scre
w
Max
imum
tigh
teni
ng to
rque
Dim
ensi
ons
Fro
nt m
ount
ing
pitc
h
Max
. len
gth
of c
ondu
ctor
stri
ppin
g
8
1 1 - 2 38,3
2 3 - 4 50,3
3 5 - 6 62,3
4 7 - 8 74,3
5 9 - 10 86,3
6 11 - 12 98,3
7 13 - 14 110,3
8 15 - 16 122,3
9 17 - 18 134,3
10 19 - 20 146,3
11 21 - 22 158,3
12 23 - 24 170,3
1 1 - 2 39,3
2 3 - 4 51,3
3 5 - 6 63,3
4 7 - 8 75,3
5 9 - 10 87,3
6 11 - 12 99,3
7 13 - 14 111,3
8 15 - 16 123,3
9 17 - 18 135,3
10 19 - 20 147,3
11 21 - 22 159,3
12 23 - 24 171,3
1 1 - 2 35,1
2 3 - 4 47,1
3 5 - 6 59,1
4 7 - 8 71,1
5 9 - 10 83,1
6 11 - 12 95,1
7 13 - 14 107,1
8 15 - 16 119,1
9 17 - 18 131,1
10 19 - 20 143,1
11 21 - 22 155,1
12 23 - 24 167,1
1 1 - 2 67
2 3 - 4 79
3 5 - 6 91
4 7 - 8 103
5 9 - 10 115
6 11 - 12 127
7 13 - 14 139
8 15 - 16 151
9 17 - 18 163
10 19 - 20 175
11 21 - 22 187
12 23 - 24 194
ø 4,3
51
31
VSN 10 - 16 - 20
Cam switches, front mounted (embedded)
Length of the control shaft can be extended at customer´s discretion in 12 mm sections.
Number of levels
Number of levels
Number of levels
Number of levels
Number of switchingsystems
Number of switchingsystems
Number of switchingsystems
Number of switchingsystems
Length L(mm)
Length L(mm)
Length L(mm)
Length L(mm)
Cam switches, central mounted
VSN 10-16-20 switches with central mounting to the opening with diameter of 22.5 mm are available in two models:- with key control- with arrow controlAt key controlled switches, the key can be removed in all postions when switching angle equals to 45° and 90°.
PANEL
Cam switches, back mounted using screws
Length of the control shaft can be extended at customer´s discretion in 12 mm sections.
Cam switches, back mounted on DIN batten
With the back mounted extension, VSN can be fi xed using screws or to the batten of 35 × 7,5 mm according to DIN EN 50022.Length of the control shaft can be extended at customer´s discretion in 12 mm sections.
Note: with key control, the switches can be applied only upto 4 levels.
9
45°
Accessories and specialmodels VSN 10 -16 -20
Back mounting panel for pro VSN 10 - 16 - 20
Universal model for both mounting using screws and on a DIN batten.
One-way turning cam switches - JO type
One-way turning can be carried out onlyfor VSN 10-16-20 under the switching angle of 45° a 90° with front or back moutning.The device prevents reverse turning of theswitch. Length of the switch is increasedby 12 mm.
Automatic reverse movement cam switches - R-type
VSN 10 - 16 - 20 cam switch can be fi tted with automatic reverse movement device (for pulse switching).Automatic reverse movement can be applied to switches up to 4 switching levels, i. e. 8 switching circuits. Other applications should be consulted with the manufacturer.R81 identifi cation defi nes automatic reverse movement from position 8 to position 1. R812 identifi cation indicates automatic reverse movement from positon 8 to position 1 and from position 2 to position 1.Reverse positions are marked with arrows, all other positions are locked.Length of the switch L is increased by 12 mm.
10
ø 4,3
51
31
1 1 - 2 34,5
2 3 - 4 46,5
3 5 - 6 58,5
4 7 - 8 70,5
5 9 - 10 82,5
6 11 - 12 94,5
7 13 - 14 106,5
8 15 - 16 118,5
9 17 - 18 130,5
10 19 - 20 142,5
11 21 - 22 154,5
12 23 - 24 166,5
1 1 - 2 39,3
2 3 - 4 51,3
3 5 - 6 63,3
4 7 - 8 75,3
5 9 - 10 87,3
6 11 - 12 99,3
7 13 - 14 111,3
8 15 - 16 123,3
9 17 - 18 135,3
10 19 - 20 147,3
11 21 - 22 159,3
12 23 - 24 171,3
1 1 - 2 35,1
2 3 - 4 47,1
3 5 - 6 59,1
4 7 - 8 71,1
5 9 - 10 83,1
6 11 - 12 95,1
7 13 - 14 107,1
8 15 - 16 119,1
9 17 - 18 131,1
10 19 - 20 143,1
11 21 - 22 155,1
12 23 - 24 167,1
1 1 - 2 67
2 3 - 4 79
3 5 - 6 91
4 7 - 8 103
5 9 - 10 115
6 11 - 12 127
7 13 - 14 139
8 15 - 16 151
9 17 - 18 163
10 19 - 20 175
11 21 - 22 187
12 23 - 24 194
VSR 10 - 16 - 20
Cam switches, front mounted (embedded)
PANEL
Number of levels
Number of levels
Number of levels
Number of levels
Number of switchingsystems
Number of switchingsystems
Number of switchingsystems
Number of switchingsystems
Length L(mm)
Length L(mm)
Length L(mm)
Length L(mm)
Length of the control shaft can be extended at customer´s discretion in 12 mm sections..
With the back mounted extension, VSR can be fi xed using screws or to the batten of 35 × 7,5 mm according to DIN EN 50022.Length of the control shaft can be extended at customer´s discretion in 12 mm sections.
Cam switches, back mounted on DIN batten
Cam switches, back mounted using screws
VSR 10-16-20 switches with central mounting to the opening with diameter of 22.5 mm are available in two models:- with key control- with arrow controlKey controlled switches - key can be removed in all postions when switching angle equals to 45° and 90°.
Note: with key control, the switches can be applied only upto 4 levels.
Cam switches, central mounted
Length of the control shaft can be extended at customer´s discretion in 12mm sections.
11
VSN 10 - 16 - 20 cam switch can be fi tted with automatic reverse movement device (for pulse switching).Automatic reverse movement can be applied to switches up to 4 switching levels, i. e. 8 switching circuits. Other applications should be consulted with the manufacturer.R81 identifi cation defi nes automatic reverse movement from position 8 to position 1. R812 identifi cation indicates automatic reverse movement from positon 8 to position 1 and from position 2 to position 1.Reverse positions are marked with arrows, all other positions are locked.Length of the switch L is increased by 12 mm.
Automatic reverse movement cam switches - R-type
Universal model for both mounting using screws and on a DIN batten.
Back mounting panel for VSR 10 - 16 - 20
Accessories and specialmodels VSR 10 -16 -20
12
K2DM 101
K2DV 168
K1DM 90
K1DV 127
Protection cover K1CSPROTECTION COVER VSN 10 - 16 - 20 VSR 10 - 16 - 20K1CS for VSN (VSR) 10 - 16 - 20up to max. 4 levels
- IP 65, installation on vertical surface- for switches without additional devices (switch with indicator, block lock switches, ...)- outlets placed in the upper and lower part of the cover (front view) max. 2 x PG 16 (1 x PG 21)- cover fi tted with N, PE conductors terminals- plastic material - suitable also for mounting on materials of B, C1, C2 fl ammability grades
Protection cover K1D
PROTECTION COVER VSN 10 - 16 - 20 VSR 10 - 16 - 20Produced in two sizes:1. K1DM for VSN (VSR) 10 - 16 - 20 do max. 3 levels2. K1DV for VSN (VSR) 10 - 16 - 20 do max. 6 levels- IP 65, installation on vertical surface- for switches with addition- outlets placed in the upper and lower part of the cover max. 2 x PG 16 (1 x PG 21)- cover fi tted with N, PE conductors terminals- plastic material - suitable also for mounting on materials of B, C1, C2 fl ammability grades
Protection cover K2D
PROTECTION COVER VSN 10 - 16 - 20 VSR 10 - 16 - 20Produced in two sizes:1. K2DM for VSN (VSR) 10 - 16 - 20 up to max. 4 levels2. K2DV for VSN (VSR) 10 - 16 - 20 up to max. 9 levels- IP 65, installation on vertical surface- for switches with additional devices (switch
with indicator, block lock switches, ...)- outlets placed in the upper and lower part of the cover (front view) max. 2 x PG 29- cover fi tted with N, PE conductors terminals- plastic material - suitable also for mounting on materials of B, C1, C2 fl ammability grades
Protection covers VSN 10 - 16 - 20 VSR 10 - 16 - 20
Cover
Cover
L (mm)
L (mm)
1 68
2 80
3 92
4 104
5 116
Number of levels Length L (mm)
Cylindrical protection cover OKV
CYLINDRICAL PROTECTION COVERVSN 10 - 16 - 20- IP 65, installation on vertical surface- for switches without addition- Outlets placed in the back - 2x pg 16- plastic materialL80
30
10
4,3
95
9579
79
4,3
102
95
145
79
129
4,3
L
152
190
174
136
4,3
L
L80
30
10
4,3
13
Protection cover OK4PROTECTION COVER VSN 10 - 16 - 20 VSR 10 - 16 - 20
OK4 for VSN (VSR) 10 - 16 - 20up to max. 4 levels
- IP 54, installation on horizontal surface- 2 x PG 21 outlets, standardly embedded on the back of the cover- cover fi tted with N, PE conductors terminals- plastic material
Protection cover OK6PROTECTION COVER VSN 10 - 16 - 20 VSR 10 - 16 - 20
OK6 for VSN (VSR) 10 - 16 - 20up to max. 6 levels
- IP 54, installation on horizontal surface- 2 x PG 21 outlets, standardly embedded on the back of the cover- cover fi tted with N, PE conductors terminals- for switches with additional devices (block
lock switches, max. up to 2 levels, cover fi tted for vertical surface installation, outlets placed
in the bottom of the cover)- plastic material
Protection covers VSN 10 - 16 - 20VSR 10 - 16 - 20
16
ø 4,3
68
48
1 1 - 2 50,5
2 3 - 4 67
3 5 - 6 83,5
4 7 - 8 100
5 9 - 10 116,5
6 11 - 12 133
7 13 - 14 149,5
8 15 - 16 166
9 17 - 18 182,5
10 19 - 20 199
11 21 - 22 215,5
12 23 - 24 232
1 1 - 2 53
2 3 - 4 69,5
3 5 - 6 86
4 7 - 8 102,5
5 9 - 10 119
6 11 - 12 135,5
7 13 - 14 152
8 15 - 16 168,5
9 17 - 18 185
10 19 - 20 201,5
11 21 - 22 218
12 23 - 24 234,5
1 1 - 2 48
2 3 - 4 64,5
3 5 - 6 81
4 7 - 8 97,5
5 9 - 10 114
6 11 - 12 130,5
7 13 - 14 147
8 15 - 16 163,5
9 17 - 18 180
10 19 - 20 196,5
11 21 - 22 213
12 23 - 24 229,5
VSN 25 - 32
Cam switches, front mounted (embedded)
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Cam switches, back mounted on screws
Number of levels
Number of levels
Number of levels
Number of switchingsystems
Number of switchingsystems
Number of switchingsystems
Length L(mm)
Length L(mm)
Length L(mm)
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Cam switches, back mounted on DIN batten
With the back mounted extension, VSN can be fi xed using screws or to the batten of 35 × 7,5 mm according to DIN EN 50022.Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
18
ø 4,3
68
48
1 1 - 2 50,5
2 3 - 4 67
3 5 - 6 83,5
4 7 - 8 100
5 9 - 10 116,5
6 11 - 12 133
7 13 - 14 149,5
8 15 - 16 166
9 17 - 18 182,5
10 19 - 20 199
11 21 - 22 215,5
12 23 - 24 232
1 1 - 2 53
2 3 - 4 69,5
3 5 - 6 86
4 7 - 8 102,5
5 9 - 10 119
6 11 - 12 135,5
7 13 - 14 152
8 15 - 16 168,5
9 17 - 18 185
10 19 - 20 201,5
11 21 - 22 218
12 23 - 24 234,5
1 1 - 2 48
2 3 - 4 64,5
3 5 - 6 81
4 7 - 8 97,5
5 9 - 10 114
6 11 - 12 130,5
7 13 - 14 147
8 15 - 16 163,5
9 17 - 18 180
10 19 - 20 196,5
11 21 - 22 213
12 23 - 24 229,5
Cam switches, front mounted (embedded)
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Cam switches, back mounted on screws
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Cam switches, back mounted on DIN batten
With the back mounted extension, VSN can be fi xed using screws or to the batten of 35 × 7,5 mm according to DIN EN 50022.Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
VSN 75 switches are available only without the contact jumper wires.
Number of levels
Number of levels
Number of levels
Number of switchingsystems
Number of switchingsystems
Number of switchingsystems
Length L(mm)
Length L(mm)
Length L(mm)
To fulfi l IP20 requirements, all idle terminals of VSN 40-75 cam switches shall be covered with plugs as standard.
VSN 40 - 63 - 75
20
104.3
50
79
98.5
98.5
79
28
28
28
L
L
L
864.3
1 1 - 2 67
2 3 - 4 100
3 5 - 6 133
4 7 - 8 166
5 9 - 10 199
6 11 - 12 232
1 1 - 2 72,5
2 3 - 4 105,4
3 5 - 6 138,4
4 7 - 8 171,4
5 9 - 10 204,4
6 11 - 12 237,4
1 1 - 2 65,5
2 3 - 4 99,5
3 5 - 6 132,5
4 7 - 8 165,5
5 9 - 10 198,5
6 11 - 12 231,5
VSN 80 - 100 - 125 - 150
Cam switches, front mounted (embedded)
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Cam switches, back mounted on screws
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Cam switches, back mounted on DIN batten
With the back mounted extension, VSN can be fi xed using screws or to the batten of 35 × 7,5 mm according to DIN EN 50022.Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Number of levels
Number of levels
Number of levels
Number of switchingsystems
Number of switchingsystems
Number of switchingsystems
Length L(mm)
Length L(mm)
Length L(mm)
To fulfil IP20 requirements, all idle terminals of VSN 80 - 150 cam switches shall be covered with plugs as standard.
22
Cam switches, front mounted (embedded)
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Cam switches, back mounted on screws
Length of the control shaft can be extended at customer´s discretion in 16.5 mm sections.
Protection of connecting terminals IP 00.
VSN 250
Number of levels Number of switchingsystems
Length L(mm)
1 1 - 2 100
2 3 - 4 166
3 5 - 6 232
Number of levels Number of switchingsystems
Length L(mm)
1 1 - 2 105,4
2 3 - 4 171,4
3 5 - 6 237,4
4 7 - 8 303,4
23
4.3
24
4.3
30
2122 L 17
10
L2832
17
64
57.5
72 100
33
49 58.5
83.15
R
10
30 mm VSN, VSR 10 - 16 - 20
50 mm VSN 25 - 50
30 mm
50 mm VSN 25 - 75
VSN, VSR 10 - 16 - 20
L
79
50
10 4.3
L + L
79
L67 -5
Accessories and special models VSN 10 - 250 , VSR 10 - 16 - 20
Cam switches, with block locks - BZ type
Block lock cam switches of BZ type are available:a) with lock inserts for various number of keys (BZX)a) with lock inserts for the same number of the key (BZY)Block locks of BZ type are not available for the central mounted cam switches.
At VSN 10 - 150, VSR 10 - 16 - 20 cam switches, the block lock of BZ type is capable of locking at the switch switching angle of 45 Dgr or 90 Dgr one (any) position, or all positions. At other switching angles, only a position of 12, 3, 6, or 9 o'clock may be locked. The key can be removed only when the switch is in the locked position.
R
R
Type range
Type range
Block lock cam switches - EZ type
EZ type block locks can be used under the same conditions as BZ block locks. The only diff erence is that the key can be removed from the lock also in the switch unlock position.
Cam switches, with split control - DO type
The split control cam switch can be mounted so that the control element is fi xed on the removable or turning panel, whilst the cam switch is fi rmly fi xed in the cabinet or switchboard. The cam switch can be back mounted. Distance of the front panel from the cam switch body is 62 - 67 mm.
Cam switches, mechanically mounted in series - T type
By connecting two switches in series to the common shaft, two cam switches of various amperages and sizes can be simultaneously controlled,e. g. common switching of power and control contacts.Control contacts of an additional switch can be switched in advance, or with delay compared to the main contacts.
24
Accessories and special modelsVSN 10 - 150 , VSR 10 - 16 - 20
Cam switches, mechanically mounted in parallel - E type
Typová řada A (mm)
Various switching problems can be solved with an extension connecting two cam switches in parallel. For instance, in case the mounting space is limited, two shorter switches can be used instead of one longer, or in case the switching program requires more than 24 contacts (switching levels), switching can be split between cam switches. In both cases, the switches are controlled via one control arrow.
VSN 10 - 16 - 20 + VSN 10 - 16 - 20 120
VSR 10 - 16 - 20 + VSR 10 - 16 - 20 120
VSN 25 - 32 + VSN, VSR 10 - 16 - 20 120
VSN 40 - 63 - 75 + VSN, VSR 10 - 16 - 20 147
VSN 25 - 75 + VSN 25 - 75 147
Type range A (mm)
Additional connecting terminal VSN 40 - 150
Cam switches with front panels 45 x 52 mmVSN, VSR 10 - 16 - 20 cam switches up to 3 switching levels can be mounted with the front panel of 45 x 52 mm to a range of module devices with the module thickness of 17,5 mm. To keep the modul device height (44 mm), the switches are fi tted with switching levels with no contacts, if needed.
In case more switching levels are needed, the total length of 44 mm will be increased by 12 mm per each additional level. In sucha case, the switches are supplied witha standard NM control lever.
52
45
44
60
71,5
Connecting terminal allows connectionof conductors with diameter 1 - 4 mm2.- protection IP 00- supplied only as a spare part
Additional connecting terminal for cable lug VSN 80 - 150Additional connecting terminal allows connection of conductors using cable lug endings and M8 screws.- supplied only as a spare part- protection IP 00
*) - minimum allowed distance between cable lugs that must be kept when mounting.For mezzanine connection of terminals using additional connecting terminals, it is necessary to use a special connectors that need to be ordered in the same amount as the number of standard connectors between levels of the switch.
newnew
25
Accessories and specialmodels VSN 25 - 250
Back mounting panel for VSN 25 - 75
Universal model for both mounting using screws and on a DIN batten.
Back mounting panel for VSN 80 - 100 - 125 - 150
Universal model for both mounting using screws and on a DIN batten.
Back mounting panel for VSN 250
Universal model for mounting using screws.
9 8 . 5
26
K2CM 101
K2CS 134
K2CV 168
K2DM 101
K2DV 168
Protection cover K2C
PROTECTION COVER VSN 25 - 75Produced in three sizes:
1. K2CM for VSN 25 - 75 max. up to 2 levels2. K2CS for VSN 25 - 75 max. up to 4 levels3. K2CV for VSN 25 - 75 max. up to 6 levels- IP 65, installation on vertical surface- for switches without auxiliaries- outlets placed in the upper and lower part of the cover max. 2 x PG 21 (1 x PG 29)- cover fitted with N, PE conductors terminals- plastic material - suitable also for mounting
on materials of B, C1, C2 flammability grades
Protection cover K2D
PROTECTION COVER VSN 25 - 75Produced in two sizes:
1. K2DM for VSN 25 - 75 up to max. 3 levels2. K2DV for VSN 25 - 75 up to max. 6 levels- IP 65, installation on vertical surface- for switches with additional devices (switch
with indicator, block lock switches, ...)- outlets placed in the upper and lower part of the cover (front view) max. 2 x PG 29- cover fi tted with N, PE conductors terminals- plastic material - suitable also for mounting
on materials of B, C1, C2 fl ammability grades
Protection cover SKN
PROTECTION COVER VSN 80 - 150SKN for VSN 80 - 150 max. up to 3 levels.
- IP 65, installation on vertical surface- for switches with additional devices- outlets placed in the upper and lower part of the cover (front view) max. 2x PG 36- cover fi tted with N, PE conductors terminals- plastic material
Protection covers VSN 25 - 150
Cover
Cover
L (mm)
L (mm)
152
190
174
136
4,3
L
Protection cover SKV
120
120
104
104
4,3
L
PROTECTION COVER VSN 250SKV for VSN 250 max. up to 3 levels.
- IP 65, installation on vertical surface- outlets placed in the upper and lower part of the cover (front view) max. 2 x PG 48- cover fi tted with N, PE conductors terminals- plastic material
Number of levels L (mm)
1 132
2 242
3 297
132
187
242
L (mm)
number of switch levels 2
number of switch levels 3
number of switch levels 4
Cover
27
Control elements and front panels
Controller and front panel - small
Controller and front panel - medium
Controller and front panel - large
Controller (lever) and front panel - medium
Controller (lever) and front panel - large
ANZ ANC
PNZ PNC
HNZ HNC
PNZ PNC
HNZ HNC
7,535
50
8,6
9,8
8,2
48
4.3
30
50
30
5060
9,4
4850
4,3
30
5084 60
48 50
4.3
60
5084
66
60504830
4.3
30
35
66
3050
NMR NMS NMC
NSR NSS NSC
NOR NOS NOC
KSR KSS KSC
KOR KOS KOC
29 21.6
2939
49 36.3
65.6
28.5
39
49 49
38.8
98.5
22.7
28.6
124
3922
.752
.5
16.7
28
NM NS NO
AN
PN
PN/Z*
HN
controllerfront panel
NVZ1R
NVZ3R
NVZ1S
NVZ3S
NVZ1C
NVZ3C
NVZ2R NVZ2S NVZ2C
PNZ PNC ZSR ZSS ZSC
66 36.8
4.3
4.3
4.3
4.3
10
10
10
30
30
30
66
66
84 45.6
304850
50
30 4866 5036.8
6684
39 29.6
5
52.8
22.7
Lockable control elements
Lockable controller - medium
Lockable controller - medium
Lockable controller - large
Lockable controller - medium
Allocation of controllers (for VSN 10 - 250, VSR 10 - 20 switches):
* as a spare part only
Allocation of controllers to front panels(for VSN 10 - 250, VSR 10 - 20 switches):
Note:NS/5, NS/6, ZS/5, ZS/6, KS/5 a KS/6 - final number 5, 6 indicates a shaft type - the number to be mentioned only when ordering a controller separately (not when ordering together with a switch).The table defines fitness of controllers to be used with the corresponding front panels up to the front panel thickness of 5 mm.
1-6 7-12 1-6 7-12 1-6 7-12 1-3 4-6
VSN typecontroller VSN 10 - 16 - 20
NM
NS/5
ZS/6
ZS/5
NS/6
NO
KS/5
KS/6
KO
NVZ1
NVZ2
NVZ3
VSN 25 - 32 VSN 40 - 63 - 75 VSN 80 - 100 - 125 - 150
number of switch levels
VSN 250
1-2 3-4
ZS KS KO
AN
PN
PN/Z*
HN
controllerfront panel
29
304850
78,8
63,8 5,3
81,1
66 9,35
304850
48
91,894
,1
9,3566
63,8 5,3
Model examples
Additional data plate for central front panelcombined with the central mounting.
Additional data plate for central front panelcombined with the central front panel.
Additional data plate for central front panelcombined with the lockable extension.
Accessories for front panelsVSN 10 - 250 a VSR 10 - 16 - 20
Front panel with a small additonal plate
Front panel with a large additonal plate
Front panels (PN) and locking equipment(NVZ1,NVZ3) of 66x66 mm can be supplemented with an additional front panel with a plate.Additional front panels are black, platesare silver.Specification:PPNC1 (front panel with a small plate)PPNC2 (front panel with a large plate)
MAIN SWITCH
CONTROL MODEPUMPSMAIN SWITCH
31
4.3
190
174
L
136
174
190
4.3
L
152
136
Special models of cam switches in covers
Cam switch in the protection cover with a fuse disconnector - K2P typeThe cam switches VSN10 - 32 (VSR 10 - 20) with IP 65 in the protection cover are available with a fuse controller or a three-pole circuit breaker.
Cam switch in the protection cover with a socket - K2Z typeThe cam switches VSN 16 - 32 with IP 65 inthe protection cover are available with a socket(3P+PEN, 3P+PE+N).
Cam switch in a protection cover with inlet - type K2RAvailable for cam switches VSN 16 - 32 with IP cover 54 and inlet (3P + PEN, 3P + PE + N).
32
Type line of cam switches diagrams
HOW TO BUILD A SWITCH DESIGNATION
SWITCHES, CHANGE-OVER SWITCHES
RESISTOR CHANGE SWITCHES
MEASURING DEVICE SWITCHES
ONE-PHASE MOTOR SWITCHES
THREE-PHASE ASYNCHRONOUS MOTOR SWITCHES
SPECIFICATION OF A TAILOR-MADE SWITCHING PROGRAM
33
34
51
52
56
57
61
VSR 10 - 16 - 20
VSN 10 - 16 - 20
VSN 25 - 32
VSN 40 - 63 - 75
VSN 80 - 100 - 125 - 150
VSN 250
BY A CUSTOMER
33
EXAMPLE OF FORMINGA TYPE NUMBER
EXAMPLES OF SWITCHING PROGRAMMULTIPLICITY AND SPECIFICATION TYPE
Diagram number
Plate acc. to switching position number
Con
tact
Co
nta
ct
Con
tact
Co
nta
ct
Co
nta
ct
Diagram number Diagram number Diagram number
36
Co
nta
ctC
on
tact
Diagram number Identifi cation on plate
SWITCHES, CHANGE-OVER SWITCHES
Warning
Warning
Idle contact
Idle contact
Diagram number
Diagram number
40
Co
nta
ct
Diagram number Identifi cation on plate
SWITCHES, CHANGE-OVER SWITCHES
Warning
Warning
Idle contact
Idle contact
Diagram number
Diagram number
Co
nta
ct
44
4152
4151
1 2 3 5 97 114 6 108
t
B 1A 1
C 1
(30° )
(30° )
1
1
1
33
83
5
5
6
6
7
78
8
6
99
5
11
11
11
10
10
10
4
4
94
22
72
12
28
44
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
2
14
30
6
11 -
27 -
43 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
1 -
13 -
29 -
5 -
1
25
9
33
17
41
5
29
13
37
21
3
27
11
35
19
43
7
31
15
39
23
2
26
10
34
18
42
6
30
14
38
22
4
28
12
36
20
44
8
32
16
40
24
4102
4101
10 2 3 5 97 114 6 108 B 1A 1
(30° ) 0
0 22
4
4
5
5
6
67
7 898
911
11
10
103
31
1
12
28
44
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
2
14
30
6
11 -
27 -
43 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
1 -
13 -
29 -
5 -
1
25
9
33
17
41
5
29
13
37
21
3
27
11
35
19
43
7
31
15
39
23
2
26
10
34
18
42
6
30
14
38
22
4
28
12
36
20
44
8
32
16
40
24
4101
4151
21 - 22
21 - 22
SWITCHES, CHANGE-OVER SWITCHES
Co
nta
ct
Diagram number Identifi cation on plate
Warning
Warning
Idle contact
Idle contact
Diagram number
Diagram number
Co
nta
ct
45
4252
4251
1 2 3 5 97 114 6 108 12
12
28
44
4
16
32
48
8
18
34
22
38
20
36
24
40
10
26
42
2
14
30
46
6
11 -
27 -
43 -
3 -
15 -
31 -
47 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
1 -
13 -
29 -
45 -
5 -
B 1A 1
(30° ) 1
1 33
5
5
6
6
7
78
8 99 12
12
11
11
10
10
4
42
21
25
9
33
17
41
5
29
13
37
21
45
3
27
11
35
19
43
7
31
15
39
23
47
2
26
10
34
18
42
6
30
14
38
22
46
4
28
12
36
20
44
8
32
16
40
24
48
SWITCHES, CHANGE-OVER SWITCHES
Co
nta
ct
Diagram number Identifi cation on plate
46
5307
5306
5305
5304
5308
5301
5303
5302
10 2 3
12
28
44
48
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
46
2
14
30
6
11 -
27 -
43 -
47 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
45 -
1 -
13 -
29 -
5 -
B 1
B 8
B 6
A 1
A 8
A 6
M 8
B 4
V 8
A 4
(30° )
(45° )
(60° )
(45° )
(90° )
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2 2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
25
9
33
17
41
45
5
29
13
37
21
3
27
11
35
19
43
47
7
31
15
39
23
2
26
10
34
18
42
46
6
30
14
38
22
4
28
12
36
20
44
48
8
32
16
40
24
B 1
B 8
B 6
A 1
A 8
A 6
M 6
B 4
V 8
A 4
(30° )
(45° )
(60° )
(60° )
(45° )
(90° )
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
5211
5212
5206
5205
5204
5203
5202
5201
5207
5208
5209
5210
10 2
12
28
44
48
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
46
2
14
30
6
11 -
27 -
43 -
47 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
45 -
1 -
13 -
29 -
5 -
1
25
9
33
17
41
45
5
29
13
37
21
3
27
11
35
19
43
47
7
31
15
39
23
2
26
10
34
18
42
46
6
30
14
38
22
4
28
12
36
20
44
48
8
32
16
40
24
5301
5303
5305
5307
5 - 6
17 - 18
29 - 30
41 - 42
SWITCHES, CHANGE-OVER SWITCHES
Diagram number Identifi cation on plate
Co
nta
ctC
on
tact
Warning
Idle contactDiagram number
47
5504
5503
5501
5502
10 2 3 54
12
28
4
16
32
8
18
34
22
38
20
36
24
40
10
26
2
14
30
6
11 -
27 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
1 -
13 -
29 -
5 -
B 1
B 8
B 6
A 1
M 1
A 8
A 6
(30° )
(30° )
(45° )
(60° )
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
3
3
3
3
33
3
3
1
1
1
1
1
1
1
1
1
25
9
33
17
5
29
13
37
21
3
27
11
35
19
7
31
15
39
23
2
26
10
34
18
6
30
14
38
22
4
28
12
36
20
8
32
16
40
24
5405
5404
5406
5401
5403
5402
10 2 3 4
12
28
44
48
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
46
2
14
30
6
11 -
27 -
43 -
47 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
45 -
1 -
13 -
29 -
5 -
B 1
B 8
B 6
A 1
A 8
A 6
(30° )
(45° )
(60° )
0
0
0
0
0
0
2
2
2
2
2
2
4
4
4
4
4
4
3
3
3
3
3
3
1
1
1
1
1
1
1
25
9
33
17
41
45
5
29
13
37
21
3
27
11
35
19
43
47
7
31
15
39
23
2
26
10
34
18
42
46
6
30
14
38
22
4
28
12
36
20
44
48
8
32
16
40
24
SWITCHES, CHANGE-OVER SWITCHES
Diagram number Identifi cation on plate
Co
nta
ctC
on
tact
48
Diagram number Identifi cation on plate
5703
5701
5702
10 2 3 5 74 6
12
28
44
4
16
32
8
18
34
22
38
20
36
24
40
10
26
2
14
30
6
11 -
27 -
43 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
1 -
13 -
29 -
5 -
B 1
B 8
A 1
A 8
(30° )
(45° )
0
0
0
0
2
2
2
2
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
3
3
3
3
1
1
1
1
1
25
9
33
17
5
29
13
37
21
3
27
11
35
19
43
7
31
15
39
23
2
26
10
34
18
6
30
14
38
22
4
28
12
36
20
44
8
32
16
40
24
5603
5604
5601
5602
10 2 3 54 6
12
28
44
48
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
46
2
14
30
6
11 -
27 -
43 -
47 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
45 -
1 -
13 -
29 -
5 -
B 1
B 8
A 1
A 8
(30° )
(45° )
0
0
0
0
2
2
2
2
4
4
4
4
5
5
5
5
6
6
6
6
3
3
3
3
1
1
1
1
1
25
9
33
17
41
45
5
29
13
37
21
3
27
11
35
19
43
47
7
31
15
39
23
2
26
10
34
18
42
46
6
30
14
38
22
4
28
12
36
20
44
48
8
32
16
40
24
5701
5703
13 - 14
41 - 42
SWITCHES, CHANGE-OVER SWITCHES
Co
nta
ctC
on
tact
Warning
Idle contactDiagram number
49
5902
5901
10 2 3 5 974 6 8
12
28
4
16
32
8
18
34
22
20
36
24
10
26
2
14
30
6
11 -
27 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
19 -
35 -
23 -
9 -
25 -
1 -
13 -
29 -
5 -
B 1A 1
(30° ) 0
0 22
4
4
5
5
6
67
7 898
9
3
31
11
25
9
33
17
5
29
13
21
3
27
11
35
19
7
31
15
23
2
26
10
34
18
6
30
14
22
4
28
12
36
20
8
32
16
24
5803
5801
5802
10 2 3 5 74 6 8
12
28
44
48
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
46
2
14
30
6
11 -
27 -
43 -
47 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
45 -
1 -
13 -
29 -
5 -
B 1A 1
(30° ) 0
0 22
4
4
5
5
6
67
7 88
3
31
11
25
9
33
17
41
45
5
29
13
37
21
3
27
11
35
19
43
47
7
31
15
39
23
2
26
10
34
18
42
46
6
30
14
38
22
4
28
12
36
20
44
48
8
32
16
40
24
SWITCHES, CHANGE-OVER SWITCHES
Diagram number Identifi cation on plate
Co
nta
ctC
on
tact
50
6102
6101
10 2 3 5 97 114 6 108
12
28
44
4
16
32
8
18
34
22
38
20
36
24
40
10
26
42
2
14
30
6
11 -
27 -
43 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
41 -
1 -
13 -
29 -
5 -
B 1A 1
(30° ) 0
0 22
4
4
5
5
6
67
7 898
911
11
10
103
31
11
25
9
33
17
41
5
29
13
37
21
3
27
11
35
19
43
7
31
15
39
23
2
26
10
34
18
42
6
30
14
38
22
4
28
12
36
20
44
8
32
16
40
24
6002
6001
10 2 3 5 974 6 108
12
28
4
16
32
8
18
34
22
38
20
36
24
40
10
26
2
14
30
6
11 -
27 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
37 -
19 -
35 -
23 -
39 -
9 -
25 -
1 -
13 -
29 -
5 -
B 1A 1
(30° ) 0
0 22
4
4
5
5
6
67
7 898
9
10
103
31
11
25
9
33
17
5
29
13
37
21
3
27
11
35
19
7
31
15
39
23
2
26
10
34
18
6
30
14
38
22
4
28
12
36
20
8
32
16
40
24
6101 21 - 22
SWITCHES, CHANGE-OVER SWITCHES
Diagram number Identifi cation on plate
Co
nta
ct
Warning
Idle contactDiagram number
51
10 2 3
7202
4
8
2
6
3 -
7 -
1 -
5 -
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
3
3
3
3
1
1
1
1
1
5
3
7
2
2
6
6
4
4
8
10 2 3
7204
4
8
2
6
3 -
7 -
1 -
5 -
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
3
3
3
3
1
1
1
1
1
5
3
7
4
4
6
22 6
8
10 2 3
7207
4
8
2
6
3 -
7 -
1 -
5 -
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
3
3
3
3
1
1
1
1
1
5
3
7
4
6
2
8
10 2 3
7211
12
4
8
10
2
6
11 -
3 -
7 -
9 -
1 -
5 -
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
3
3
3
3
1
1
1
1
1
9
5
3
11
7
2
10
6
4
12
8
10 2 3
7607
4
8
2
6
3 -
7 -
1 -
5 -
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
3
3
3
3
1
1
1
1V 1
W 1
W 2 U1
U2
V 2
1
5
3
7
4
6
2
8
RESISTOR CHANGE SWITCHES
Diagram number Identifi cation on plate
Co
nta
ctC
on
tact
Co
nta
ctC
on
tact
Co
nta
ct
ALTERNATIVE 1
ALTERNATIVE 1
ALTERNATIVE 2
ALTERNATIVE 2
WIRING
0 OFF 1 R
1
2 R2
3 R1 +R
2 IN SERIES
WIRING
0 OFF 1 R
1 + R
2 IN SERIES
2 R2
3 R1
WIRING
0 OFF 1 R
1 + R
2 IN SERIES
2 R1
3 R1 + R
2 IN PARALLEL
WIRING
0 OFF 1 R
1
2 R1 + R
2 IN SERIES
3 R2
WIRING
0 OFF 1 R
1
2 R2
3 R1 + R
2 IN PARALLEL
WIRING
0 OFF 1 R
1
2 R1 + R
2 IN PARALLEL
3 R1 + R
2 + R
3 IN PARALLEL
WIRING
0 OFF 1 R1 between R and S 2 R1 between R and S, R
2 between S a T
3 R1, R
2 a R
3 v D
POSITION POSITION
POSITION POSITION
POSITION
POSITION
POSITION
52
Diagram number Identifi cation on plate
L 1L 20 21
8052
4
8
2
6
3 -
7 -
1 -
5 -
1
5
3
7
2
6
4
8
A
ti2
ti1
B 8A 8
A 4
C 8
B 4
(45° )
(90° )
(45°)
0
0
0
0
0
2
2
2
2
2
11
1
1
1
C 4
(90° )
0
21
L 10 1
8051
4
2
3 -
1 -
1 32 4
A
ti
B 8A 8
A 4
D 4
B 4
(45° )
(90° )
(90° )
0
0
0
0
0
11
1
1
1
0 21 3 4
8101
12
4
16
8
10
2
14
6
11 -
3 -
15 -
7 -
9 -
1 -
13 -
5 -
t
L 1L 2L 3L 41
9
5
13
3
11
7
15
2
10
6
14
4
12
8
16
A
ti3
ti4
ti2
ti1
B 8A 8
E 4
(45° )
(90° )
0
0 2
2
2
4
4
4
3
3
3
11
1
8053
B 8A 8
A 4
C 8
B 4
(45° )
(90° )
(45° )
0
0
0
0
0
2
2
2
2
2
11
1
1
1
C 4
(90° )
0
21
1 L 12 L 20
12
4
8
10
2
6
11 -
3 -
7 -
9 -
1 -
5 -
1
9
5
3
11
7
2
10
6
4
12
8
A
ti2
ti1
Co
nta
ctC
on
tact
Co
nta
ctC
on
tact
MEASURING DEVICE SWITCHES
53
L 1L 2L 30
8164
12
4
16
8
18
10
2
14
6
11 -
3 -
15 -
7 -
17 -
9 -
1 -
13 -
5 -
1
9
17
5
13
3
11
7
15
2
10
18
6
14
4
12
8
16
B 4A 4
0
0
L 1
L 1
L 3
L 3L 2
L 2
A
(90° )
L 1 L 3L 1L 2
L 2L 30
8151
12
4
8
10
2
6
11 -
3 -
7 -
9 -
1 -
5 -
1
9
5
3
11
7
2
10
6
4
12
8
A
B 4A 4
(90° ) 0
0
B 8A 8
(45° ) 0
0
L 2
L 2
L 2
L 2
L 3
L 3
L 3
L 3
ti3
ti2
ti1
L 1 L 1
L 1
L 1
L 1 L 3L 1L 2
L 2L 30
8157
12
4
16
8
20
10
2
14
6
11 -
3 -
15 -
7 -
19 -
9 -
1 -
13 -
5 -
1
9
5
13
3
11
19
7
15
2
10
6
14
4
12
20
8
16
A
B 4A 4
(90° ) 0
0
B 8A 8
(45° ) 0
0
L 2
L 2
L 2
L 2
L 3
L 3
L 3
L 3
ti3
ti2
ti1
L 1 L 1
L 1
L 1
L 1L 2L 3L 40 L 2L 1 L 3 L 4
8102
4
8
2
6
3 -
7 -
1 -
5 -
1
5
3
7
2
6
4
8
A
ti3
ti4
ti2
ti1
B 8A 8
E 4
(45° )
(90° )
0
0 L 2
L 2
L 2
L 4
L 4
L 4
L 3
L 3
L 3
L 1L 1
L 1
MEASURING DEVICE SWITCHES
Diagram number Identifi cation on plate
Co
nta
ctC
on
tact
Co
nta
ctC
on
tact
54
0
8359
12
4
16
8
10
2
14
6
11 -
3 -
15 -
7 -
9 -
1 -
13 -
5 -
C 80
L1L3 2
L1L1 3
L1L2 3 L 2L2 3
L 2L1 2
L 1L1 3
1
9
5
13
3
11
7
15
2
10
6
14
4
12
8
16
2L1
2L21L2
1L1
1L32L3
V
0
8351
4
8
2
6
3 -
7 -
1 -
5 -
1
5
3
7
2
6
4
8L2
L1L3
V
B 4A 4
(90° ) 0
0
B 8A 8
(45° ) 0
0
L L2 3
L L2 3
L L2 3
L L2 3
L L1 3
L L1 3
L L1 3
L L1 3
L L1 2 L L1 2
L L1 2
L L1 2
0
8357
12
4
8
10
2
6
11 -
3 -
7 -
9 -
1 -
5 -
C 80
L N2
L N1L L1 2
L N3L L1 3
L L2 3
1
9
5
3
11
7
2
10
6
4
12
8
N
L2
L1
L3
V
8256
10 2 3
12
4
8
10
2
6
11 -
3 -
7 -
9 -
1 -
5 -B 4A 4
(90° ) 0
0
23
32
1
1
B 8A 8
(45° ) 0
0 2
23
3
111
9
5
3
11
7
2
10
6
4
12
8U2U1 U3
V
MEASURING DEVICE SWITCHES
Diagram number Identifi cation on plateC
on
tact
Co
nta
ctC
on
tact
Co
nta
ct
55
ti3
ti2
ti1
tu1
tu2
ti2
ti1
Co
nta
ctC
on
tact
Co
nta
ctDiagram number Identifi cation on plate
MEASURING DEVICE SWITCHES
56
Diagram number Identifi cation on plate
1 0 2
9101
4
8
10
12
2
6
3 -
7 -
9 -
11 -
1 -
5 -
1
9 11
5
3
7
2
10 12
6
4
8
V 1
V 2
U1 U2
C 8
C 4
(45° )
(90° )
0
0
2
2
1
1L4
10 2
9051
4
8
2
6
3 -
7 -
1 -
5 -
1
5
3
7
2
6
4
8
B 8
C 8
A 8
B 4A 4
(45° )
(45° )
(90° )
0
0
0
0
0
2
2
2
2
2
1
1
1
1
1
C 4
(90° )
0
21
10 2
9455
4
2
6
3 -
1 -
5 -
1
5
32
6
N4
Z1Z2
U1
U2
M1~
B 8A 8
B 4A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
11
1
1
10 2
9501
4
8
10
12
2
6
3 -
7 -
9 -
11 -
1 -
5 -
1
9L 4 11
5
3
7
2
10 12
6
4
8
V 1
V 2
Y 2
Y 1
X 1
X 2
U1
U2
B 8
C 8
A 8
B 4A 4
(45° )
(45° )
(90° )
0
0
0
0
0
2
2
2
2
2
1
1
1
1
1
C 4
(90° )
0
21
1 2
9256
4
8
10
2
6
3 -
7 -
9 -
1 -
5 -1
9 11
5
3
7
2
10 12
6
4
8
A
DB
C
B 8A 8
B 4
D 4 M 4
A 4
(45° )
(90° )
(90° )
22
2
222
2
1
1
1
11
1
1
M1~
SWITCHES FOR ONE-PHASE MOTORS
Co
nta
ctC
on
tact
Co
nta
ctC
on
tact
Co
nta
ct
Reverse change-over switch
1 In-series winding (220 V)2 In-parallel winding (110 V)
POLOHA CONNECTION
1 In-series winding (220 V) 2 In-parallel winding (110 V)
57
YY 0
9153
12
4
16
8
18
20
10
2
14
6
11 -
3 -
15 -
7 -
17 -
19 -
9 -
1 -
13 -
5 -
1
9
17
5
13
3
11
19
7
15
2
10
18
6
14
4
12
20
8
16
M3~
C 8
(45° )
0Y Y
-
V 1
W 1
W 2 U1
U2
V 2
1 0 2
9151
4
8
10
2
6
3 -
7 -
9 -
1 -
5 -
1
9
5
3
7
2
10
6
4
8
V 1V 2
W 1
W 2 U1
U2
M3~
C 8
C 4
(45°)
(90°)
0
0
2
2
1
1
Y
9352
4
8
10
2
6
3 -
7 -
9 -
1 -
5 -
1
9
5
3
7
2
10
6
4
8
M3~
B 8
B 4
M 4
A 8
A 4
D 4
(45° )
(90° )
(90° )
Y
Y
Y
Y
Y
Y
Y
-
V 1
W 1
W 2 U1
U2
V 2
9551
1
9
5
13
3
11
7
15
2
10
6
14
4
12
8
16
M3~
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
Y
Y
Y
Y
-
V 1
W 1
W 2 U1
U2
V 2
Y0
12
4
16
8
10
2
14
6
11 -
3 -
15 -
7 -
9 -
1 -
13 -
5 -
SWITCHES FOR THREE-PHASEASYNCHRONOUS MOTORS
Diagram number Identifi cation on plate
Co
nta
ctC
on
tact
Co
nta
ctC
on
tact
Reverse change-over switch
Reverse change-over switch
Change-over switch
Change-over switch
58
11 0 22
9154
12
4
16
8
18
22
20
24
10
2
14
6
11 -
3 -
15 -
7 -
17 -
21 -
19 -
23 -
9 -
1 -
13 -
5 -1
9
17
5
13
21
3
11
19
7
15
23
2
10
18
6
14
22
4
12
20
8
16
24
1V
1W2W
1U
2U2V
M3~
C 8
(45°)
0
221 1
(DAHLANDER)
10 2
9552
12
4
16
8
10
2
14
6
11 -
3 -
15 -
7 -
9 -
1 -
13 -
5 -
1
9
5
13
3
11
7
15
2
10
6
14
4
12
8
161V
1W2W
1U
2U2V
M3~
(DAHLANDER)-
C 8
(45° )
021
C 4
(90° )
0
21
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
1
1
1
1
M 4D 4
(90° ) 222
1
1
1
B 8
B 4
A 8
A 4
(45° )
(90° )
2
2
2
2
1
1
1
1
9354
1
9
5
13
3
11
7
15
2
10
6
14
4
12
8
161V
1W2W
1U
2U2V
M3~
(DAHLANDER)-
1 2
12
4
16
8
10
2
14
6
11 -
3 -
15 -
7 -
9 -
1 -
13 -
5 -
SWITCHES FOR THREE-PHASEASYNCHRONOUS MOTORS
Diagram number Identifi cation on plateC
on
tact
Co
nta
ct
Pole reverse change-over switch
Pole change-over switch
Pole change-over switch
59
SWITCHES FOR THREE-PHASEASYNCHRONOUS MOTORS
Diagram number Identifi cation on plate
Co
nta
ctC
on
tact
Co
nta
ct
Pole change-over switch
Pole change-over switch
Pole change-over switch
WINDING B
WINDING B
WINDING B
WINDING A
WINDING A
WINDING A
60
Co
nta
ct
10 2
9553
12
4
16
8
10
2
14
6
11 -
3 -
15 -
7 -
9 -
1 -
13 -
5 -
1
9
5
13
3
11
7
15
2
10
6
14
4
12
8
16
1V 1
2V 1
1W
2W
1U
2U
1V 2
2V 2
VINUTÍ A
VINUTÍ B
B 8
B 4
A 8
C 8
A 4
(45° )
(45° )
(90° )
0
0
0
0
0
2
2
2
2
2
1
1
1
1
1
C 4
(90° )
0
21
10 2 3
9567
12
4
16
8
18
22
20
10
2
14
6
11 -
3 -
15 -
7 -
17 -
21 -
19 -
9 -
1 -
13 -
5 -
1
9
17
5
13
21
3
11
19
7
15
2
10
18
6
14
22
4
12
20
8
16
V 1
W 1
W 2
U1
U2
V 2
L 2
L 1
L 3
M3~
( )-- -
B 8
B 4
A 8
A 4
(45° )
(90° )
0
0
0
0
2
2
2
2
3
3
3
3
1
1
1
1
10 2 3
9557
4
12
28
4
16
32
8
18
34
22
20
36
24
10
26
2
14
30
6
11 -
27 -
3 -
15 -
31 -
7 -
17 -
33 -
21 -
19 -
35 -
23 -
9 -
25 -
1 -
13 -
29 -
5 -1
25
9
33
17
5
29
13
21
3
27
11
35
19
7
31
15
23
2
26
10
34
18
6
30
14
22
4
28
12
36
20
8
32
16
24
1V
1V
1W
1W
2W
2W
1U
1U
2U
2U
2V
2V
VINUTÍ B
VINUTÍ A
B 8A 8
(45° ) 0
0 2
2 4
4
3
3
11
( )-- -
SWITCHES FOR THREE-PHASEASYNCHRONOUS MOTORS
Co
nta
ctC
on
tact
Diagram number Identifi cation on plate
Pole change-over switch 2 separate windings
Pole change-over switch
Pole change-over switch
WINDING B
WINDING A
WINDING A
WINDING B
SPECIFIKACE ATYPICKÉHO PROGRAMU SPÍNÁNÍCustomer
Address
Contact person
Tax IDCompany ID
Fax
Tel. No.
Date
The switch is inteded for
Switching angle (circle)
Type range
Standard linksStandard links for connection of two
contacts on the same level and between
to adjacent levels.
Closed contact.
Closed contact in two (or more) consecutive positions, with intermediate
position interruption.
Closed contact in two (or more) consecutive positions, without
intermediate position interruption.
Overlapping contacts: one contact closes (or opens) only after the latter
contact closed (or opened).
Pulse contact: Closed in the intermediate positon for the time interval
needed to change the position.
Contact
number
Teoretical position identification
Required position identification
One-way turning
Initial position - mark with arrow
Reverse movement - mark with arrow in direction of return (only for 45 °)
45° a 90°: Recommended initial position 1 or 7, nevertheless, it can be placed in any marked position.
30°: Recommended initial position 1 or 10.
Allocation of controllers to front panels (for VSN 10 - 250 switches):
front panel
front panel
controller
controller
* as a spare part only
Notes:
Accessories:
Diagram drawing number Customer drawing number
CUSTOM CAM SWITCH SPECIFICATION
Production Cooperative Zlin
Na Slanici 378764 13 Zlín - Louky
Czech Republic
Phone: +420 577 195 138Fax: +420 577 195 152
E-mail: [email protected]
www.obzorzlin.com
CAMSWITCHES
Rev
isio
n 0
8/2
01
5. S
ub
ject
to
mo
dif
i cat
ion
s.
OBZORProduction Cooperative Zlin
OBZOR is a stable and reliable supplierof products and services since 1965.
Traditional Czech producer of cam switches, house switches and sockets and other electrical accessories.
A major supplier of plastic components for Automotive industry. The company has excellent machinery, also
off ers product assembly cooperation.Employer of physically challenged people.
The aim of the company is to constantly improve the quality, declared by following certifi cates: CSN EN
ISO 9001:2009 and ISO 14001:2005.
EXTEND
ED W
ARRANTY PERIOD FOR VSN AND VSR
5YEARS
Tradition since 1965
Suitable for safe disconnection