OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of...

57

Transcript of OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of...

Page 1: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.
Page 2: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

OBJECTIVESOBJECTIVES

1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.2. Identify PV system maintenance requirements and demonstrate service procedures for modules, arrays, batteries, power conditioning equipment, safety systems, and weather sealing systems.3. Demonstrate how to measure PV system performance and compare with specifications.4. Demonstrate how to perform PV diagnostic procedures and troubleshooting skills.5. Demonstrate how to identify PV performance safety issues, and implement corrective measures.6. Demonstrate how to test and verify PV system installation functionality and integrity using proper wire labeling, wire mapping, wire placements, input/output verifications, and prior documentation.7. Demonstrate when to communicate with technical support, and what information is relevant.

(continued)

Page 3: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

OBJECTIVES (CONTINUED)OBJECTIVES (CONTINUED)

8. Compile, maintain, and deliver appropriate manuals and documentation (records of system operation, performance, and maintenance activities) to the client upon the completion of the PV installation.9. Identify demarcation issues, along with the responsibilities of associated trades and/or utilities.

Page 4: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Has it been cloudy for several days? Maybe the battery bank simply needs recharging.

Is the array blocked (shaded) by something, or is it dirty?

Are any fuses or circuit breakers blown or tripped?

If the PV system fails, determine:

Any loose connections?

Are any connections corroded?

Is the wiring system operating with proper polarity?

(continued)

Page 5: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Is the system operating under proper voltage and current?

Are the modules and batteries properly connected (series and parallel configuration)?

Are any of the components physically damaged?

If the PV system fails, determine: (continued)

Page 6: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Analyze the problem thoroughly enough to be able to create a clear problem statement. With a clear problem statement in mind, define the observed symptoms and their potential causes.

11

Gather enough facts in order to help isolate the possible causes of the problem.

22

Consider the possible problem causes based on the facts gathered.

33

The following steps help to round out the general problem-solving process.

(continued)

Page 7: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Create an action plan based on those causes. Begin with the most likely problem, and devise a plan in which only one variable will be manipulated.

44

Implement the action plan, performing each step carefully while testing to see whether the symptom disappears.

55

Analyze the results to determine whether the problem is resolved.

66

The following steps help to round out the general problem-solving process. (continued)

(continued)

Page 8: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Terminate the process if the problem is resolved.

77

If the problem is not resolved, create an action plan based on the next most probable cause, and return to Step 4 to repeat the process until the problem is solved.

88

The following steps help to round out the general problem-solving process. (continued)

Page 9: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-1: Digital Multimeter

Page 10: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-2: DC Voltage Check

Page 11: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

WARNINGWARNING

When setting the meter, it is normal practice to first set the meter to its highest voltage range, to make certain that the voltage level being measured does not damage the meter.

Page 12: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-3: Testing an Outlet

Page 13: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

WARNINGWARNING

Remember to keep the power off. Unlike the voltage check, resistance checks are always made with power removed from the system.

Page 14: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-4: Measuring Current

Page 15: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

The various sections of a photovoltaic system include components such as:

Photovoltaic cells. These are thin squares, discs, or films of semiconductor material that generate voltage and current when exposed to sunlight.

Panels. These are various configurations of individual PV cells, laminated between a clear glazing.

(continued)

Page 16: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

The various sections of a photovoltaic system include components such as: (continued)

Arrays. These consist of one or more panels, wired together to provide a specific voltage. Figure 7-5 illustrates how cells, modules, panels, and arrays are related.

Charge controllers. These are equipment components that regulates battery voltage.

Battery storage. The medium used to store direct current electrical energy.

(continued)

Page 17: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-5: Photovoltaic Cell, Module, Panel, and Array Example

Page 18: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

The various sections of a photovoltaic system include components such as: (continued)

Inverters. These are electrical devices that change direct current into alternating current.

DC loads. These are appliances, motors, and equipment powered by direct current.

AC loads. These are appliances, motors, and equipment powered by alternating current.

Page 19: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

The various arrangements of PV modules and panels include:

Strings. A string consists of a number of PV panels connected in series.

Arrays. An array consists of a number of PV strings connected in parallel.

Page 20: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-6: Cleaning the PV Module

Page 21: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-7: Partial Shading of a 36-Cell PV Module

Page 22: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-8: A Combiner Box

Page 23: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Voltages between strings should match closely when the sunlight is consistent. Keep the following key points in mind:

NEC 690.7(A) requires that the open circuit voltage be multiplied by a correction factor based on the lowest expected ambient temperature.

Convention dictates that the lowest expected ambient temperature is the same as the minimum recorded temperature.

Voltages over 600V are not permitted in one and two family dwellings, as per NEC690.7(C).

(continued)

Page 24: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Voltages between strings should match closely when the sunlight is consistent. Keep the following key points in mind: (continued)

For the majority of New York State, if the nominal Voc is over 480Vdc then the system will exceed the 600V limit.

Voc over 600Vdc can damage inverters, insulation, and switchgear.

Open circuit voltage of PV panels is temperature dependent, generally –0.4%/° C.

(continued)

Page 25: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Voltages between strings should match closely when the sunlight is consistent. Keep the following key points in mind: (continued)

Voc is not a strong function of irradiance and it comes up pretty quickly at dawn before any direct radiation hits or heats the PV modules.

Night sky radiation actually cools the modules a few degrees below the ambient temp and that is why you get frost above 32° F.

The lowest daily temperatures generally occur just before sunrise.

Page 26: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Table 7-1: Color Coding for AC and DC PV Circuits

Page 27: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-9: Multi-contact PV Connectors

Page 28: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-10: A Solarlok Junction Box

Page 29: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-11: Huber+Suhner Connectors

Page 30: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Table 7-2: IP Ratings

Page 31: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-12: A Basic PV Wiring Example

Page 32: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-13: PV System Fuses for 600Vdc and 1000Vdc Systems

Page 33: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-14: Normal PV Module Operations

Page 34: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-15: A Shaded PV Module Hot Spot with No Bypass Diodes

Page 35: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-16: A Shaded PV Module Hot Spot with Bypass Diodes

Page 36: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-17: Module IV Curves With and Without Bypass Diodes

Page 37: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-18: Bypass Diodes Housed In Module Junction Boxes

Page 38: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Blocking reverse current flow from the battery through the module at night. In battery charging systems, the module potential drops to zero at night, and the battery could discharge all night backwards through the module. This would not be harmful to the module, but would result in loss of precious energy from the battery bank. Diodes placed in the circuit between the module and the battery can block any nighttime leakage flow.

11

Two situations in which blocking diodes can help prevent the phenomenon include:

(continued)

Page 39: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Blocking reverse current flow through damaged modules during the day, originating from parallel modules. In high-voltage systems during daylight conditions, blocking diodes can be placed at the head of separate series-wired strings. If one string be comes severely shaded, or if there is a short circuit in one of the modules, the blocking diode prevents other strings from losing current backwards through the shaded/damaged string. The shaded/damaged string is “isolated” from the others, and more current reaches the load. In this configuration, blocking diodes are called “isolation diodes.”

22

Two situations in which blocking diodes can help prevent the phenomenon include: (continued)

Page 40: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the voltage level is too low at the point where the battery storage system connects to the PV system, then there are several options to consider:

The PV system is not supplying enough current to the battery system to keep it charged up – a PV panel or string is not functioning, the disconnect(s) are open, one of the monitoring devices is faulty, or an overcurrent device has blown or tripped.

(continued)

Page 41: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the voltage level is too low at the point where the battery storage system connects to the PV system, then there are several options to consider: (continued)

One or more of the batteries in the system is failing – when a cell within a battery fails, the entire battery may fail (refusing to take a charge) or it may simply produce a lower than specified output voltage. In either case, you will have to isolate the defective battery and replace it with a working one. In complex storage systems, this will involve isolating the terminals of each battery one-by-one to test its output.

(continued)

Page 42: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the voltage level is too low at the point where the battery storage system connects to the PV system, then there are several options to consider: (continued)

There has simply not been enough light present to produce sufficient output to charge the battery storage system – check for dirty panels or shading that may be diminishing the output of the PV array.

Page 43: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-19: Battery Storage System Connection Point

Page 44: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the input voltage is correct, but no (or improper) output voltages are present, there are several possibilities to consider:

The battery storage system is configured improperly (incorrect series-parallel connections)

(continued)

There are bad connections or devices between the charge controller and the battery storage system, causing the charge controller to not sense the presence of the batteries (charge controllers shut down when no load is connected to them)

Page 45: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the input voltage is correct, but no (or improper) output voltages are present, there are several possibilities to consider: (continued)

One or more of the batteries in the storage system are defective

The Charge Controller is defective (or it could be incorrectly sized for the panel array/battery storage system configurations)

Page 46: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-20: A Simple Charge Controller

Page 47: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-21: Load Diverter Duties

Page 48: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the inverter’s input voltage to the inverter is low (or missing), check the battery storage system to determine the cause of the low voltage. Possible causes can include:

The battery storage system is configured improperly (incorrect series-parallel connections). Verify the battery system configuration and rewire as necessary to achieve the correct configuration.

(continued)

Page 49: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the inverter’s input voltage to the inverter is low (or missing), check the battery storage system to determine the cause of the low voltage. Possible causes can include: (continued)

There are bad connections or devices between the inverter and the battery storage system (or the charging controller), causing excessive voltage drop between the battery system and the inverter. Make sure the cabling is large enough to handle the current flow from the battery storage system or the PV system. Tighten all the connections between the batteries and the inverter.

(continued)

Page 50: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the inverter’s input voltage to the inverter is low (or missing), check the battery storage system to determine the cause of the low voltage. Possible causes can include: (continued)

One or more of the batteries in the storage system are defective. Replace the battery with a working unit.

(continued)

Page 51: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the inverter’s input voltage to the inverter is low (or missing), check the battery storage system to determine the cause of the low voltage. Possible causes can include: (continued)

The inverter’s load is too large and is pulling AC current out of the inverter faster than the battery/PV array systems can produce DC current to replace it. Disconnect the load and check the output of the inverter without it. Manually reset the unit by turning it off and then back on.

(continued)

Page 52: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the inverter’s input voltage to the inverter is low (or missing), check the battery storage system to determine the cause of the low voltage. Possible causes can include: (continued)

The Charge Controller or Diverter/Regulator output voltage is too high, causing the inverter to shut down for self-protection purposes.

(continued)

Page 53: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

If the inverter’s input voltage to the inverter is low (or missing), check the battery storage system to determine the cause of the low voltage. Possible causes can include: (continued)

The input vents for the inverter’s fan may be clogged causing it to shut down due to overheating - clear the vents so that cooling air can move freely through the inverter. Allow the inverter to cool off before restarting it.

Page 54: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

CAUTIONCAUTION

Always make sure to disconnect the AC source before disconnecting any of the DC connections.

Page 55: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Documentation that was originally organized or created by the installation team, or previous repair personnel.

11

Troubleshooting documentation exists in two categories:

Documentation that you, the troubleshooting technician must generate during any repair scenario.

22

Page 56: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-22: A Residential Solar PV Wiring Diagram with Overlay

Page 57: OBJECTIVES 1. Identify the three general steps required for the diagnostics and troubleshooting of PV systems and demonstrate knowledge of their use.

Figure 7-23: A Cable Tester