O-Ringe / o-rings€¦ · 3 O-Ringe / o-rings ISO 3601-1, Klasse B und ISO 3601-3, Sortenmerkmal N...

45
1 Beschreibung Der O-Ring ist ein aus gummielastischen Werkstof- fen endlos gepresster Rundring mit kreisförmigem Querschnitt. Description The o-ring is a round ring of circular cross-section made as an endless pressing from elastic rubber materials. Anwendung O-Ringe werden sowohl zur statischen als auch dynamischen Abdichtung in der Pneumatik und Hydraulik eingesetzt. Applications O-rings are used for static and dynamic sealing in pneumatics and hydraulics. Standardqualität NBR 70 Basis: Acrylnitril-Butadien-Kautschuk Härte: ca. 70 Shore A Temperatur: -30° C bis + 120° C Medien: Mineralöl, mineralische, tierische und pflanzliche Fette, Druckluft, Kaltwasser Standard grade NBR 70 Base: Acryl-nitrile butadiene rubber Hardness: approx. 70 Shore A Temperature: -30° C to +120° C Media: mineral oil, mineral greases, arimal and vegetable fats, compressed air, cold water. O-Ringe / o-rings Sonderausführungen/Special grades 40+/-5 50+/-5 60+/-5 80+/-5 90+/-5 FKM 75 und -80 Basis: Fluor-Kautschuk Härte: ca. 75/80 Shore IRHD FKM 75 and -80 Base: Fluorine rubber Hardness: approx. 75/80 Shore IRHD ISO 3601-1, Klasse B und ISO 3601-3, Sortenmerkmal N / DIN3771/1

Transcript of O-Ringe / o-rings€¦ · 3 O-Ringe / o-rings ISO 3601-1, Klasse B und ISO 3601-3, Sortenmerkmal N...

  • 1

    BeschreibungDer O-Ring ist ein aus gummielastischen Werkstof-fen endlos gepresster Rundring mit kreisförmigem Querschnitt.

    DescriptionThe o-ring is a round ring of circular cross-section made as an endless pressing from elastic rubber materials.

    AnwendungO-Ringe werden sowohl zur statischen als auch dynamischen Abdichtung in der Pneumatik und Hydraulik eingesetzt.

    ApplicationsO-rings are used for static and dynamic sealing in pneumatics and hydraulics.

    StandardqualitätNBR 70Basis: Acrylnitril-Butadien-KautschukHärte: ca. 70 Shore ATemperatur: -30° C bis + 120° CMedien: Mineralöl, mineralische, tierische und pflanzliche Fette, Druckluft,Kaltwasser

    Standard gradeNBR 70Base: Acryl-nitrile butadiene rubberHardness: approx. 70 Shore ATemperature: -30° C to +120° CMedia: mineral oil, mineral greases, arimal and vegetable fats,compressed air, cold water.

    O-Ringe / o-rings

    Sonderausführungen/Special grades

    40+/-5 50+/-5 60+/-5 80+/-5 90+/-5

    FKM 75 und -80 Basis: Fluor-Kautschuk Härte: ca. 75/80 Shore IRHD

    FKM 75 and -80 Base: Fluorine rubber Hardness: approx. 75/80 Shore IRHD

    ISO 3601-1, Klasse B und ISO 3601-3, Sortenmerkmal N / DIN3771/1

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 2

    O-Ringe / o-ringsISO 3601-1, Klasse B und ISO 3601-3, Sortenmerkmal N / DIN3771/1

    SilikonkautschukKurzbezeichnung: VMQHärte: 30, 50, 60, 70, 80, 85Beschreibung: Das Einsatzgebiet ergibt sich aus hervorragender Temperaturbeständigkeit (-55°C bis +200°C), welche allerdings nicht auf Heißwasser oder Dampf übertragen werden darf. Obwohl die Ölbeständigkeit ungefähr der von NBR gleicht, wer-den die physikalisch-mechanischen Eigenschaften nicht erreicht. *** Lebensmittelqualität

    Ethylen-Propylen-Dien-KautschukKurzbezeichnung: EPDMHärte: 60, 70, 80, 85Beschreibung: Der Einsatzbereich ist dort an-gezeigt, wo hohe Heißwasser- und Dampfbe-ständigkeit gefordert wird. Gute Alterungs- und Ozonbeständigkeit. Gute Kältebeständigkeit. Das Verhalten gegen Öle, Schmierfette und Lösungs-mittel entspricht etwa dem von NBR. Die Chemika-lienbeständigkeit, auch gegen oxydierend wirkende Agenzien ist sehr gut. Temperaturbereich von -40°C bis +140°C. ***auch peroxidisch vernetzt

    PolytetrafluorethylenKurzbezeichnung: PTFEHärte: 95Beschreibung: Universelle Beständigkeit außer ge-gen flüssige Alkalimetalle und Fluorgas unter Druck. Gute Gleiteigenschaften, geringer Verschleiß, Temperaturbeständigkeit von -200°C bis +260°C. Da PTFE jedoch die Härte von 95° Shore besitzt, ist der Einbau von O-Ringen in geteilten Nuten zu empfehlen. Wegen der geringen Elastizität auch mit Elastomerkern lieferbar.

    PerfluorkautschukKurzbeschreibung: FFKMHärte: 60, 65, 70, 75, 80, 85, 90Beschreibung: Ausgezeichnete und nahezu univer-selle Chemikalienbeständigkeit. Weiter Temperatur-bereich -30°C bis +327°C. Verbindet die elastischen Eigenschaften von Fluorkautschuk mit der chemi-schen und thermischen Beständigkeit von PTFE. ***FDA Zulassung

    Silicone rubberShortcut: HNBRHardness: 30, 50, 60, 70, 80, 85Description: The application arises from an excel-lent temperature resistance (-55°C to +200°C), which however must not be transferred to hot water or steam. Although the oil resistance approximate-ly similar to that of NBR, the physical-mechanical properties are not achieved. *** Food Quality

    Ethylene-propylene-diene rubberShortcut: EPDMHardness: 60, 70, 80, 85Description: The application area is indicated when high hot water and steam resistance is required. Good aging and ozone resistance. Good resistance to cold. The behavior to oils, greases and solvents is approximately that of NBR. The chemical resis-tance, is also very good against oxidising agents. Temperature range from -40°C to +140°C. *** peroxide crosslinked

    PolytetrafluoroethyleneShortcut: PTFEHardness: 95Description: Universal resistance except against li-quid alkaline metals and fluorine gas under pressu-re. Good sliding properties, low wear, temperature resistance from -200°C to +260°C. However, since PTFE has hardness of 95 Shore, the incorporation of O-rings in split grooves is recommended. Be-cause of the low elasticity with elastomer core also available.

    Perfluoro rubberShortcut: FFKMHardness: 60, 65, 70, 75, 80, 85, 90Description: Excellent and almost universal che-mical resistance. Wide temperature range -30°C to +327°C. Combines the elastic properties of fluorocarbon rubber with the chemical and thermal resistance of PTFE. *** FDA approval

    Hydrierter NitrilkautschukKurzbezeichnung: HNBRHärte: 75Beschreibung: Hohe Beständigkeit gegen additiv-haltige technische Öle, geringe Dampf- und Gas-durchlässigkeit, gute Kälteflexibilität bis -40°, gute Ozonbeständigkeit sowie hohen Abriebwiderstand. Hitzebeständigkeit bis +145°

    Hydrogenated nitrile rubberShortcut: HNBRHardness: 75Description: High resistance to technical oils con-taining additives, low vapor and gas permeability, good cold flexibility to -40 degrees, good ozone resistance and high abrasion resistance. Heat resis-tant up to +145 °

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 3

    O-Ringe / o-ringsISO 3601-1, Klasse B und ISO 3601-3, Sortenmerkmal N / DIN3771/1

    FluorsilikonkautschukKurzbeschreibung: FVMQHärte: 60, 65, 70, 75, 80Beschreibung: Material basierend auf Fluorsilikon, auch mit einer leitfähigen Füllung aus Silber, Nickel, Glas, Kupfer, Aluminium. Einsetzbar über weiten Temperaturbereich von -56°C bis +175°C und in Fällen einer Aussetzung aggressiver Medien, wie Öle, Kraftstoffe, Lösungsmittel ohne Beein-trächtigung der physikalischen und elektronischen Eigenschaften. Hervorragende Korrosionsresistenz. Leitfähiges Elastomer mit ausgezeichneter Ab-schirmleistung.

    Aflas®Kurzbeschreibung: TFE/PHärte: 75Beschreibung: Außergewöhnliche Beständigkeit ge-genüber einer Vielzahl von Medien und Chemikali-en wie Heißwasser, Wasserdampf, Säuren, Laugen, Ammoniak, Gasen, Ölen, Aminen, Motorölen, und oxidierenden Medien. Einsatztemperatur ähnlich denen der Fluorelastomere von -20°C bis +200°C.

    Acrylat KautschukKurzbeschreibung: ACMHärte: 70, 80Beschreibung: Ausgezeichnete Hitze- und Heißöl-beständigkeit. Resistent gegen Motoröle Getrie-beöle, Schmierfette usw. Hohe Oxidations- und Ozonbeständigkeit. Temperaturbereich von -40°C bis +200°C.

    ChloroprenkautschukKurzbeschreibung: CRHärte: 50, 60, 70, 80Beschreibung: Die chemischen und physikalischen Eigenschaften ähneln denen des NBR. Die Mineral-ölbeständigkeit ist geringer, die Alterungs-, Ozon-, Säuren-, und Alkalienbeständigkeit jedoch ausge-zeichnet. Temperaturbereich von -40°C bis +120°C.

    PolyurethankautschukKurzbeschreibung: AUHärte: 75, 80, 90Beschreibung: Sehr gute Beständigkeit gegen Kraftstoffe und vielen technisch gebräuchlichen Ölen, Sauerstoff und Ozon. Hohe Gasdichtigkeit. Temperaturbeständigkeit von -30°C bis + 125°C.

    Fluorosilicone rubberShortcut: FVMQHardness: 60, 65, 70, 75, 80Description: Fluorosilicone based material, also with a conductive filling made of silver, nickel, glass, copper, aluminum. Can be used over a wide tempe-rature range from -56°C to +175°C and in cases of suspension of aggressive media, such as oils, fuels, solvents without affecting the physical and elec-tronic properties. Excellent corrosion resistance. Conductive elastomer with excellent shielding.

    Aflas®Shortcut: TFE/PHardness: 75Description: Exceptional resistance to a variety of media and chemicals such as hot water, steam, acids, alkalis, ammonia, gases, oils, amines, motor oils, and oxidizing media. Operating temperature similar to those of fluoroelastomers from -20°C to +200°C.

    Acrylate rubberShortcut: ACMHardness: 70, 80Description: Excellent heat and hot oil resistance. Resistant to engine oils, gear oils, greases, etc. High oxidation and ozone resistance. Temperature range from -40°C to +200°C.

    Chloroprene rubberShortcut: CRHardness: 50, 60, 70, 80Description: The chemical and physical properties are similar to those of NBR. The oil resistance is low, the resistance to aging, ozone, acids, and alkali resistance howeveris excellent. Temperature range from -40°C to +120°C.

    Polyurethane rubberShortcut: AUHardness: 75, 80, 90Description: Very good resistance to fuels and oils, many common technically, oxygen and ozone. High gas-tightness. Temperature resistance from -30°C to +125°C.

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 4

    Fertigungstoleranzen /manufacturing tolerances

    Sortenmerkmale

    Sortenmerkmal N(Normalausführung)

    Diese O-Ringe erfüllen hohe Qualitätsansprüche und sind sowohl für den statischen als auch für den dynamischen Einsatz geeignet.

    O-Ringe in Normalausführung sind bevorzugt lieferbar.

    Sortenmerkmal S(Sonderausführung)

    Diese O-Ringe erforden einen erheblich größeren Fertigungs- und Kontrollaufwand. Sie sind daher wesentlich teurer als die Normalausführung.

    Nur bei höchsten Anforderungen an Ausführung und Dichtheit verwenden.

    O-Ringe in Sonderausführung sind nicht ab Lager lieferbar.

    Types

    Type 1(standard version)

    These O-rings meet very stringent quality require-ments and are suitable for both static and dynamic uses.

    O-rings of the standard type are available on prefe-rential terms.

    Type S(special version)

    These O-rings require much more sophisticated production and quality control. As a result they are considerably more costly than the standard version.

    They should only be used to meet the very highest production and sealing requirements.

    O-rings of special kinds are not available from stock.

    Schnurdurchmesser / Section diameter

    0,00 1,80 0,081,81 2,65 0,092,66 3,55 0,103,56 5,30 0,135,31 7,00 0,15

    7,01 8,00 0,168,01 8,60 0,178,61 9,00 0,189,01 10,00 0,1910,01 11,00 0,20

    11,01 12,00 0,2212,01 13,00 0,2313,01 14,00 0,2414,01 15,00 0,2615,01 16,00 0,27

    16,01 18,00 0,3018,01 20,00 0,3320,01 24,00 0,3824,01 25,00 0,39

    Innendurchmesser / Int. diameter

    0,00 2,80 0,132,81 4,00 0,144,01 5,30 0,155,31 7,10 0,167,11 8,50 0,17

    8,51 9,75 0,189,76 10,60 0,1910,61 11,80 0,2011,81 13,20 0,2113,21 15,00 0,22

    15,01 16,00 0,2316,01 17,00 0,2417,01 19,00 0,2519,01 20,60 0,2620,61 21,20 0,27

    21,21 22,40 0,2822,41 23,60 0,2923,60 25,00 0,3025,01 26,50 0,3126,51 28,00 0,32

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 5

    Innendurchmesser / Int. diameter

    28,01 29,00 0,3229,01 30,00 0,3430,01 31,50 0,3531,51 33,50 0,3633,51 34,50 0,37

    34,51 35,50 0,3836,51 37,50 0,3937,51 38,70 0,4038,71 40,00 0,4140,01 41,20 0,42

    41,21 42,50 0,4342,51 45,00 0,4445,01 46,20 0,4546,21 47,50 0,4647,51 48,70 0,47

    48,71 50,00 0,4850,01 51,50 0,4951,51 53,00 0,5053,01 54,50 0,5154,51 56,00 0,52

    56,01 58,00 0,5458,01 60,00 0,5560,01 61,50 0,5661,51 63,00 0,5763,01 65,00 0,58

    65,01 67,00 0,6067,01 69,00 0,6169,01 71,00 0,6371,01 73,00 0,6473,01 75,00 0,65

    75,01 77,50 0,6777,51 80,00 0,6980,01 82,50 0,7182,51 85,00 0,7185,01 87,50 0,74

    87,51 90,00 0,7690,01 92,50 0,7792,51 95,00 0,7995,01 97,50 0,8197,51 100,00 0,82

    100,01 103,00 0,85103,01 106,00 0,87106,01 109,00 0,89109,01 112,00 0,91112,01 115,00 0,93

    Innendurchmesser / Int. diameter

    115,01 118,00 0,95118,01 122,00 0,97122,01 125,00 0,99125,01 128,00 1,01128,01 132,00 1,04

    132,01 136,00 1,07136,01 140,00 1,09140,01 142,50 1,11142,51 145,00 1,13145,01 147,50 1,14

    147,51 150,00 1,16150,01 152,50 1,18152,51 155,00 1,19155,01 157,50 1,21157,51 160,00 1,23

    160,01 162,50 1,24162,51 165,00 1,26165,01 167,50 1,28167,51 170,00 1,29170,01 172,50 1,31

    172,51 175,00 1,33175,01 177,50 1,34177,51 180,00 1,36180,01 182,50 1,38182,51 185,00 1,39

    185,01 187,50 1,41187,51 190,00 1,43190,01 195,00 1.46195,01 200,00 1,49200,01 203,00 1,51

    203,01 206,00 1,53206.01 212,00 1,57212,01 218,00 1,61218,01 224,00 1,65224,01 227,00 1,67

    227,01 230,00 1,69230,01 236,00 1,73236,01 239,00 1,75239,01 243,00 1,77243,01 250,00 1,82

    250,01 254,00 1,84254,01 258,00 1,87258,01 261,00 1,89261,01 265,00 1,91265,01 268,00 1,92

    Fertigungstoleranzen /manufacturing tolerances

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 6

    Fertigungstoleranzen /manufacturing tolerances

    Innendurchmesser / Int. diameter

    268,01 272,00 1,96272,01 276,00 1,98276,01 280,00 2,01280,01 283,00 2,03283.01 286,00 2,05

    286,01 290,00 2,08290,01 295,00 2,11295,01 300,00 2,14300,01 303,00 2,16303,01 307,00 2,19

    307,01 311.00 2,21311,01 315,00 2,24 315,01 320,00 2,27320,01 325,00 2,30325,01 330,00 2,33

    330,01 335,00 2,36335,01 340,00 2,40340,01 345,00 2,43345,01 350,00 2,46350,01 355,00 2,49

    355,01 360,00 2,52360,01 365,00 2,56365,01 370,00 2,62370,01 375,00 2,62375,01 379,00 2,64

    379,01 383,00 2,67383,01 387,00 2,70387,01 391,00 2,72391,01 395,00 2,75395,01 400,00 2,78

    400,01 406,00 2,82406,01 412,00 2,85412,01 418,00 2,89418,01 425,00 2,93425,01 429,00 2,96

    429,01 433,00 2,99433,01 437,00 3,01437,01 443,00 3,05443,01 450,00 3,09450,01 456,00 3,13

    456,01 462,00 3,17462,01 466,00 3,19466,01 470,00 3,22470,01 475,00 3,25475,01 479,00 3,28

    Innendurchmesser / Int. diameter

    479,01 483,00 3,30483,01 487,00 3,33487,01 493,00 3,36493,01 500,00 3,41500,01 508,00 3,46

    508,01 515,00 3,50515,01 523,00 3,55523,01 530,00 3,60530,01 538,00 3,65538,01 545,00 3,69

    545,01 553,00 3,74553,01 560,00 3,78560,01 570,00 3,85570,01 580,00 3,91580,01 590,00 3,97

    590,01 600,00 4,03600,01 608,00 4,08608,01 615,00 4,12615,01 623,00 4,17623,01 630,00 4,22

    630,01 640,00 4,28640,01 650,00 4,34650,01 660,00 4,40660,01 670,00 4,47670,01 680,00 4,53

    680,01 690,00 4,59690,01 700,00 4,65700,01 710,00 4,71710,01 720,00 4,77720,01 730,00 4,83

    730,01 740,00 4,90740,01 750,00 4,96750,01 760,00 5,02760,01 770,00 5,08770,01 780,00 5,14

    780,01 790,00 5,20790,01 800,00 5,26800,01 810,00 5,33810,01 820,00 5,39820,01 830,00 5,45

    830,01 840,00 5,51840,01 850,00 5,57850,01 860,00 5,63860,01 870,00 5,69870,01 880,00 5,75

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 7

    Stoßversatz Gratausbildung Einkerbung Entgratungsbreite

    Fließlinien Sonstige Fehler

    Fehlerart / Type of defect Oberflächen-ausführung /Surface Type

    Stoßversatz, Grat / Joining Error, burr formation f

    Einkerbung /Notching

    Entgratungsbreite / Deburring Width h

    Fließlinien in Umfangsrichtung /Flow lines in circumferential direction

    Sonstige Fehler / Other defects

    Rauhtiefe der Oberfläche / Surface peak-to-valley height

    Flecken / Stains

    Breite / Widht g Tiefe / Depth t

    Breite / Widht gTiefe / Depth t

    Länge / Lenght aTiefe / Depth t

    Länge / Lenght aTiefe / Depth t

    Länge / Lenght aTiefe / Depth t

    Länge / Lenght aTiefe / Depth t

    RZ / RZ

    NS

    N

    NS

    NS

    NS

    S

    N

    S

    N

    S

    0,060,05

    0,120,09

    0,1 - d0,05

    0,1 - d0,05

    0,05 - d0,09

    0,05 - d0,09

    0,40,4

    1,20,7

    0,1 - D0,03

    0,1 - D0,06

    0,05 - D0,06

    0,05 - D0,03

    0,3 - d0,05

    0,3 - d0,09

    0,1 - d0,06

    0,1 - d0,03

    10 µm 5 µm

    16 µm 8 µm

    zulässig / permissiblezulässig / permissible

    Zul. Fehlergrößen für Ringdicken d /Permissible size of defect for ring of thickness d

    ≤ 2,65 > 2,65

    Die in der Tabelle angeführten Fehlergrößen dienen als Richtwerte für den Hersteller und den Anwen-der. Als Grundlage für die Kontrolle dienen Grenz-muster, die nach der Tabelle bestimmt wurden.

    Es sind verschiedene Fehlerarten gleichzeitig zulässig.

    Auswahl der geeigneten O-Ring-GrößeDer Innendurchmesser ist so zu wählen, dass weder eine Dehnung von 6%, noch eine Stauchung von 3% überschritten wird. Es tritt sonst eine zu große Querschnittsverringerung und innen eine zu große Abflachung ein. Bei zu großer Stauchung besteht die Gefahr der Ringverwerfung.

    The defect sizes given in the chart are for guidance of manufacturer and user. Specimens exhibiting the limits given in the table are used as the basis for control.

    Different types of defect occuring sumultaneously are permissible.

    Choosing rightsized O-ringsThe choosen internal diameter must be such as ensure the ring is not streched by more than 6% or compressed by more than 3%. Otherwise the cross-section will be reduced too much and the inside will be flattened exessively. If compressed too much, there is a danger the ring will be distorted.

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 8

    Einbaumaße /Installation dimensions

    Schnurdicke /Cross section

    W mm

    Radial dynamisch und statisch /radial dynamic and static

    Axial-statisch /axial-static

    Radius R¹ /Radius R¹

    Nuttiefe /Groovedepth

    E¹ mmTol. + 0,1

    Nutbreite /Groovewidth

    F³ mmTol. + 0,2

    ohne Stützring /withoutback-upring

    mm

    mitStützring /withback-upring

    mm

    Nuttiefe /Groovedepth

    E mmTol. + 0,05

    F mmTol. + 0,2

    mit 1Stützring /with 1back-upring

    mm

    mit 2Stützringen /with 2back-uprings

    mm

    Nutbreite / Groove width

    0,40 0,50 0,60 1,00 und 1,02 1,10, 1,12 und 1,15 1,20 125 und 1,27 1,30 142 und 1,45 1,50 und 1,52 1,57, 1,60 und 1,63 1,78 und 1,80 1,83 1,90, 198, 2,00 und 2,02 2,08 und 2,10 2,20 und 2,21 2,26 2,30 2,40 2,46 2,50 2,60, 2,62 und 2,70 2,70 und 2,75 2,95 und 3,00 3,15 3,30, 3,53 und 3,60 4,00 4,50 5,00 5,33 5,50 5,70 und 5,80 6,00 6,50 7,00 7,50 8,00 8,40 9,00 9,5010,0012,0014,0015,00

    0,28 0,35 0,45 0,80 0,90 0,95 1,00 1,05 1,15 1,25 1,30 1,45 1,50 1,55 1,75 1,85 1,90 1,95 2,05 2,10 2,15 2,25 2,30 2,60 2,70 3,05 3,50 4,00 4,40 4,70 4,80 5,00 5,30 5,70 6,10 6,60 7,10 7,50 8,10 6,60 9,1011,0012,2013,20

    0,60 0,70 0,80 1,40 1,50 1,70 1,80 1,80 1,90 2,00 2,20 2,40 2,40 2,50 2,80 2,90 3,00 3,00 3,20 3,30 3,40 3,60 3,70 3,90 4,00 4,80 5,40 6,00 6,70 7,10 7,30 7,70 8,20 8,90 9,5010,4011,0011,7012,5013,3013,5016,8019,0020,00

    - - - - - - - - - - - 3,80 3,80 3,90 4,30 4,30 4,40 4,40 4,60 4,70 4,80 5,00 5,10 5,30 5,40 6,20 7,10 7,70 8,40 8,80 9,00 9,40 9,9010,6012,0012,9013,5014,2015,0015,8016,0019,3021,5022,50

    -----------5,205,205,305,605,705,805,806,006,106,206,406,506,706,807,608,809,4010,1010,5010,7011,1011,6012,3014,5015,4016,0016,7017,5018,3018,5021,8024,0025,00

    0,26 0,35 0,40 0,65 0,75 0,80 0,85 0,90 0,95 1,10 1,20 1,40 1,40 1,50 1,45 1,55 1,55 1,60 1,75 1,80 1,90 2,00 2,00 2,30 2,30 2,70 3,10 3,50 3,90 4,10 4,30 4,40 4,70 5,10 5,50 5,90 6,30 6,97 7,10 7,50 7,90 9,4011,6211,80

    0,30 0,70 0,80 1,40 1,50 1,70 1,80 1,80 1,90 2,20 2,20 2,40 2,40 2,80 2,80 2,90 3,00 3,00 3,30 3,35 3,40 3,50 3,70 4,00 4,00 4,60 5,20 5,80 6,40 6,80 7,00 7,40 7,60 8,20 8,80 9,4010,0010,7811,3011,8012,4015,1017,7718,60

    - - - 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,4 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,6 0,6 0,8 0,8 1,0 1,0 1,0 1,0 1,2 1,2 1,2 1,2 1,2 1,5 1,5 1,5 2,0 2,0 2,0 2,0 3,0 3,0 3,0

    - - - - - - - - - - - 0,2 0,2 0,2 0,2 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,4 0,4 0,4 0,4 0,4 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • 9

    Stützringe /Back-up rings

    Stützringe

    Stützringe werden zusammen mit O-Ringen für dy-namische und statische Anwendungen eingesetzt, um ein Einpressen in den Dichtspalt zu vermeiden.

    Der Einbau wird grundsätzlich empfohlen, wenn mindestens eine der folgenden Betriebsbedingun-gen vorliegt:- Hoher Druck - normalerweise sogar ab 50 bar u.U. auch bei geringeren Drücken- Große Toleranzen zwischen den abzudichtenden Teilen- Hohe Hubgeschwindigkeit oder schnelle Hubfol ge- Hohe Betriebstemperatur- Hohe Temperaturschwankungen- Hoher Verschmutzungsgrad im System

    Bei einseitig wirkendem Druck genügt der Einbau eines Stützringes auf der dem Druck abgewandten Seite, während bei doppelseitiger Beaufschlagung je ein Stützring zu beiden Seiten des O-Ringes verwendet werden muss (Einbaumassnahme siehe Tabelle).Stützringe werden vorwiegend aus dem Werk-stoff PTFE (Polytetrafluoräthylen) und speziellen Modifikationen gefertigt. Diese Werkstoffe besitzen hervorrangende Gleiteigenschaften, chemische Beständigkeit und die Fähigkeit, Fremdkörper, wie Späne etc., einzubetten.Drei Standardausführungen stehen zur Verfügung:- Ungeschlitzt (endlos) (a)- Geschlitzt (b)- Spiralförmig (c)Spiralförmige oder geschlitzte Stützringe sind einfach zu montieren. Besondere Werkzeuge sind nicht erforderlich.

    Back-up rings

    Back-up rings are used together with O-Rings in both static and dynamic applications to avoid extrusion of the O-Ring into the gap.

    The additional expenditure is justified by the longer life of the sealing components, and the therefore more economical performance. The use of back-up rings is advantageous under any of the following conditions:- high pressure; over 50 bar, and under certain circumstances, even lower pressures- large tolerances between the parts to be sealed- high speed of frequencies- high temperatures- large fluctuations in temperature- in especially dirty systems

    If pressure arises on only one side of the Quad-Ring, it will suffice to fit one back-up ring on the unexposed side. Two back-up rings, one on each side are necessary if the pressure rises on both sides of the Quad-Ring. It is recommended to instll two back-up rings in all instances in order to avoid problems.Back-up rings are usually made from Polytetrafluo-roethylene (PTFE), which can be modified for spe-cial applications. These materials have low friction, extremely good chemical resistance and are able to embody burrs and other foreign particles.The three standard versions we offer are:- uncut (a)- cut (b)- spiral (c)

    Spiral and cut back-up rings can be installed easi-ly. No special tooling is necessary.

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    0,5 10,7 0,50,7 0,50,73 1,020,74 1,02

    0,75 10,8 1,250,8 1,60,8 20,85 2

    0,9 0,530,97 0,331 0,41 0,51 0,6

    1 0,71 11 21,02 1,781,07 1,21

    1,07 1,271,1 21,15 11,2 11,2 2

    1,22 1,071,24 2,621,27 1,021,3 11,3 1,1

    1,3 2,41,42 1,521,44 1,011,46 1,581,5 1

    1,5 1,021,5 1,51,5 1,61,5 1,751,5 2

    1,6 11,77 1,011,78 0,891,78 1,021,78 1,19

    AbmessungenDimensionsd1 d2

    3 23 2,43 33 4,53 5

    3 63 83,05 1,273,1 0,883,1 1,6

    3,15 1,83,17 1,783,2 1,53,2 1,63,2 1,8

    3,2 2,53,25 1,853,3 13,3 1,53,3 2,4

    3,35 1,783,4 0,83,4 1,33,4 1,73,4 1,8

    3,4 1,93,45 2,023,5 0,93,5 13,5 1,1

    3,5 1,23,5 1,53,5 1,63,5 1,83,5 1,9

    3,5 23,5 33,5 43,53 1,023,55 1,6

    3,55 1,83,56 1,273,6 1,23,6 1,33,6 1,9

    AbmessungenDimensionsd1 d2

    1,78 1,681,78 1,781,8 11,8 1,021,8 1,2

    1,85 1,51,9 1,251,9 1,352 1,52 1,6 1,85 1,51,9 1,251,9 1,352 1,52 1,6

    2 1,82 22 32,01 1,62,06 2,62

    2 12 1,52 1,62 1,82 2

    2,24 1,782,24 1,82,3 0,852,3 1,22,3 1,3

    2,31 1,52,35 12,39 1,272,4 1,32,4 1,5

    2,4 1,92,4 2,82,5 12,5 1,22,5 1,3

    2,5 1,52,5 1,62,5 1,752,5 1,82,5 2

    AbmessungenDimensionsd1 d2

    2,5 2,42,54 1,022,57 1,782,6 12,6 1,2

    2,6 1,32,6 1,42,6 1,62,6 1,82,6 1,9

    2,6 22,6 2,42,65 1,62,66 1,972,69 1,37

    2,7 12,7 1,52,7 1,62,7 1,92,75 1,6

    2,79 1,022,8 12,8 1,52,8 1,62,8 1,8

    2,82 1,522,84 1,782,84 2,622,85 2,322,9 0,85

    2,9 1,052,9 1,22,9 1,252,9 1,52,9 1,75

    2,9 1,783 13 1,23 1,253 1,35

    3 1,53 1,63 1,73 1,83 1,85

    AbmessungenDimensionsd1 d2

    3,6 1,93,6 23,6 2,43,6 2,73,62 1,64

    3,63 2,623,66 1,193,66 1,93,68 1,253,68 1,78

    3,7 13,7 1,63,7 1,83,7 1,93,7 2

    3,72 1,023,75 1,83,8 1,253,8 1,53,8 2,1

    3,86 1,19 3,9 1,53,9 1,83,9 2,43,95 1,78

    4 14 1,14 1,24 1,54 1,55

    4 1,64 1,754 1,84 1,854 2

    4 2,24 2,54 34 44 5

    4 5,54 64 84,1 1,64,1 1,7

    10

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    AbmessungenDimensionsd1 d2

    AbmessungenDimensionsd1 d2

    AbmessungenDimensionsd1 d2

    AbmessungenDimensionsd1 d2

    10

    4,20 1,904,30 2,404,30 2,404,34 3,534,40 1,10

    4,42 2,624,48 1,784,50 1,004,50 1,504,50 1,70

    4,50 1,804,50 2,004,50 2,504,60 1,854,60 2,00

    4,60 2,304,60 2,404,70 1,004,70 1,104,76 1,78

    4,80 1,504,80 1,804,90 1,904,93 1,504,95 1,28

    5,00 1,005,00 1,205,00 1,255,00 1,405,00 1,50

    5,00 1,755,00 1,905,00 2,005,00 2,505,00 3,00

    5,00 3,505,00 5,005,05 1,555,10 1,105,10 1,60

    5,23 2,625,28 1,785,30 2,405,30 4,305,30 5,00

    5,37 1,785,50 1,005,50 1,505,50 1,605,50 1,80

    5,50 2,005,50 3,005,56 1,595,60 2,405,70 1,90

    5,80 1,505,80 2,605,82 1,205,94 3,536,00 1,00

    6,00 1,506,00 2,006,00 2,106,00 2,206,00 2,30

    6,00 2,506,00 3,006,00 3,506,00 4,006,00 4,50

    6,00 5,506,00 6,006,00 6,506,02 2,626,03 1,88

    6,07 1,306,07 1,786,10 1,606,16 2,676,20 1,00

    6,20 4,106,30 2,406,30 2,60

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    6,35 1,786,35 2,56,36 1,586,4 1,86,4 1,9

    6,4 2,56,5 16,5 1,56,5 1,66,5 1,9

    6,5 26,5 2,26,5 2,56,5 36,5 3,2

    6,5 46,5 56,55 16,55 1,16,55 3,7

    6,6 2,46,7 1,86,75 1,786,8 1,66,8 1,9

    6,8 26,8 2,46,9 1,87 17 1,2

    7 1,37 1,57 1,77 1,87 2

    7 2,27 2,57 37 3,47 4

    7 57 67,01 1,197,1 1,67,1 1,8

    AbmessungenDimensionsd1 d2

    8,5 18,5 1,58,5 1,88,5 1,98,5 2

    8,5 2,58,5 38,5 3,58,51 1,788,6 2,4

    8,6 38,64 2,038,7 28,7 38,73 1,78

    8,76 1,88,8 1,28,8 1,58,8 1,98,8 2,4

    8,8 3,28,9 1,98,9 2,68,9 2,78,92 1,83

    9 19 1,29 1,59 1,69 1,8

    9 1,859 29 2,29 2,259 2,5

    9 39 3,59 49 4,59 5

    9 5,59 69 109,02 1,789,1 1,6

    AbmessungenDimensionsd1 d2

    7,2 17,2 1,97,2 2,27,3 1,27,3 1,78

    7,3 2,27,3 2,37,3 2,47,4 27,5 1

    7,5 1,177,5 1,37,5 1,47,5 1,57,5 1,7

    7,5 1,87,5 1,857,5 1,97,5 27,5 2,2

    7,5 2,47,5 2,57,5 37,5 3,57,5 5

    7,5 5,337,5 6,757,52 3,537,6 1,27,6 1,3

    7,6 1,67,6 1,87,6 1,97,6 2,47,6 2,62

    7,6 47,64 1,637,65 1,027,65 1,377,65 1,63

    7,65 2,627,66 1,787,66 2,47,7 1,57,7 1,9

    AbmessungenDimensionsd1 d2

    7,75 2,627,8 1,257,8 1,757,8 1,97,8 2,45

    7,8 2,67,8 6,37,9 1,67,9 2,37,9 2,5

    7,9 4,77,92 2,627,94 1,788 18 1,1

    8 1,28 1,258 1,58 1,68 1,7

    8 1,88 1,98 28 2,28 2,4

    8 2,58 2,68 2,88 38 3,5

    8 3,78 48 4,58 58 6

    8 88,04 18,1 1,68,13 1,788,15 1,02

    8,2 1,58,3 18,3 1,68,3 2,48,4 2,5

    AbmessungenDimensionsd1 d2

    9,1 1,99,12 3,539,13 2,629,14 1,529,15 3

    9,19 2,629,2 3,59,25 1,789,25 1,859,3 1,5

    9,3 1,69,3 2,49,4 1,029,5 19,5 1,25

    9,5 1,49,5 1,59,5 1,69,5 1,89,5 2

    9,5 2,59,5 2,759,5 39,5 4,39,5 4,5

    9,5 59,52 1,789,52 2,59,6 2,49,6 2,5

    9,6 4,89,66 1,789,7 19,7 1,39,7 1,6

    9,75 1,789,8 19,8 1,59,8 1,99,8 2,4

    9,8 2,59,8 4,59,85 2,959,92 1,839,92 2,62

    11

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    10 110 1,210 1,310 1,510 1,8

    10 210 2,110 2,210 2,410 2,5

    10 2,610 2,810 310 3,110 3,3

    10 3,510 410 4,510 510 6

    10 6,510 810 1,610 1,710 1,8

    10,2 2,510,3 1,210,3 2,410,4 110,45 2

    10,46 5,3310,5 110,5 1,510,5 1,5510,5 1,75

    10,5 1,810,5 210,5 2,310,5 2,510,5 2,7

    10,5 310,5 4,510,5 5,910,52 1,8310,6 1

    AbmessungenDimensionsd1 d2

    12 2,512 312 3,212 3,512 4

    12 4,512 4,612 512 5,512 6

    12 712 812 1012,07 5,3612,1 1,6

    12,1 1,712,1 2,112,1 2,712,19 112,2 1,3

    12,2 1,712,29 3,5312,3 2,112,3 2,412,37 2,62

    12,4 212,42 1,7812,5 112,5 1,512,5 1,6

    12,5 1,812,5 212,5 2,112,5 2,2512,5 2,5

    12,5 3 12,5 3,512,5 4,812,6 2,412,6 3,25

    12,7 2,6212,7 9,9212,78 6,0512,8 2,412,8 3,2

    AbmessungenDimensionsd1 d2

    10,6 1,810,6 2,410,64 1,1210,69 3,5310,7 1,1

    10,78 2,6210,8 1,210,8 1,810,8 1,910,8 2,40

    10,8 2,610,8 310,82 1,2810,82 1,7810,9 1,25

    10,9 2,0311 111 1,211 1,311 1,5

    11 1,5511 1,811 211 2,211 2,5

    11 2,7511 2,811 311 3,511 4

    11 4,211 4,511 511 5,211 5,5

    11 611 711 811 911,08 1,8

    11,1 1,611,11 1,5911,11 1,7811,11 2,3811,18 1,27

    AbmessungenDimensionsd1 d2

    11,2 1,811,2 2,311,2 2,511,3 1,211,3 1,3

    11,3 2,411,3 311,4 4,411,5 111,5 1,3

    11,5 1,511,5 1,611,5 211,5 2,411,5 2,5

    11,5 2,811,5 311,5 411,6 1,711,6 2,4

    11,6 2,811,6 2,911,6 6,3511,65 1,511,7 5,8

    11,8 1,511,8 1,811,8 1,911,8 2,111,8 2,3

    11,8 2,411,8 2,511,8 2,811,8 3,5311,84 2,4

    11,89 1,9811,91 1,611,91 2,6212 112 1,2

    12 1,512 1,712 1,912 212 2,25

    AbmessungenDimensionsd1 d2

    12,9 1,2413 113 1,2513 1,313 1,4

    13 1,513 1,713 213 2,1513 2,5

    13 2,613 313 3,513 3,613 3,8

    13 413 4,513 513 613 8

    13,1 1,613,1 2,6213,2 1,613,2 1,813,2 1,9

    13,2 213,2 2,513,25 1,513,3 1,5513,3 1,8

    13,3 2,413,34 1,3413,34 1,813,4 1,913,4 2,7

    13,44 2,113,44 2,513,46 2,0813,5 113,5 1,5

    13,5 213,5 2,413,5 2,513,5 2,7513,5 3

    12

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    13,5 3,413,5 513,6 213,6 2,213,6 2,4

    13,6 2,513,6 2,713,6 2,7513,6 313,64 5,33

    13,65 2,6213,8 213,8 2,113,8 2,413,87 3,53

    13,9 2,413,95 2,6214 114 1,2514 1,5

    14 1,614 1,6514 1,714 1,7814 2

    14 2,314 2,414 2,514 2,614 2,65

    14 2,714 314 3,214 3,514 4

    14 4,114 4,214 514 614 8

    14,01 2,6214,1 1,614,2 2,614,3 1,7514,3 2,4

    AbmessungenDimensionsd1 d2

    16 1,2516 1,516 1,816 1,916 2

    16 2,516 2,6516 2,716 316 3,5

    16 416 4,2516 4,416 4,516 5

    16 5,516 5,616 616 716 8

    16 1016 1216,1 1,616,1 1,816,25 1,98

    16,3 2,416,36 2,2116,4 1,416,5 116,5 1,5

    16,5 216,5 2,2516,5 2,516,5 2,716,5 3

    16,5 416,55 2,1316,56 1,716,6 116,6 2,4

    16,7 1,416,7 2,516,76 1,216,79 116,8 2,2

    AbmessungenDimensionsd1 d2

    14,3 414,4 114,4 214,43 1,7814,5 1

    14,5 1,514,5 1,614,5 1,6514,5 1,814,5 2

    14,5 2,514,5 314,5 414,5 514,5 5,8

    14,6 2,414,6 2,614,68 1,0214,7 1,5714,8 1,5

    14,8 2,414,8 3,314,81 1,7814,85 1,515 1

    15 1,515 1,615 1,7815 1,815 2

    15 2,115 2,1515 2,2515 2,515 2,6

    15 2,6515 2,815 2,915 315 3,2

    15 3,515 3,815 415 515 5,6

    AbmessungenDimensionsd1 d2

    15 615 715 815 915 10

    15,08 2,6215,1 1,615,1 2,715,2 1,315,2 1,8

    15,2 2,815,22 2,6215,24 5,3315,3 1,7815,3 2,4

    15,4 1,315,4 1,515,47 3,5315,5 115,5 1,5

    15,5 1,5515,5 2,2515,5 2,415,5 2,515,5 3

    15,5 3,2515,5 3,515,5 3,815,5 4,215,5 4,5

    15,54 2,6215,6 1,7815,6 2,315,6 2,415,6 3,4

    15,8 2,415,8 4,115,8 7,215,88 1,7815,88 2,62

    15,88 3,9615,9 2,315,9 2,716 116 1,1

    AbmessungenDimensionsd1 d2

    16,8 2,416,81 5,316,9 2,716,9 2,717 1

    17 1,217 1,517 1,717 217 2,3

    17 2,517 317 3,317 3,517 3,8

    17 417 4,517 517 5,317 5,5

    17 617 717 817 1017,04 3,5

    17,1 1,317,1 1,617,13 2,617,16 1,717,2 1,5

    17,2 317,25 1,217,27 4,0117,3 2,417,4 2,8

    17,4 3,517,4 817,46 2,617,5 117,5 1,5

    17,5 1,817,5 217,5 2,417,5 2,517,5 3

    13

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    17,5 3,1517,5 3,2517,5 3,517,5 417,5 4,2

    17,5 4,517,5 5,2517,5 6,2517,6 117,6 2,4

    17,7 117,7 1,317,74 1,7817,8 1,517,8 2,4

    17,8 2,617,8 1017,86 2,6217,93 1,7817,93 2,46

    17,96 2,6218 118 1,1518 1,318 1,5

    18 1,6518 1,818 218 2,218 2,5

    18 2,6518 2,7518 2,818 318 3,15

    18 3,518 3,5518 3,618 418 4,5

    18 518 5,7518 618 6,7518 7

    AbmessungenDimensionsd1 d2

    19,8 2,319,8 2,419,8 3,619,99 5,3320 1

    20 1,320 1,520 220 2,220 2,25

    20 2,420 2,520 2,6520 2,820 2,9

    20 320 3,1520 3,520 3,5520 3,6

    20 420 4,320 4,520 520 5,5

    20 5,720 620 6,520 6,7520 7

    20 820 1020,1 1,620,12 220,2 1,78

    20,2 320,22 3,5320,22 4,0420,24 1,7820,29 2,62

    20,3 2,420,3 4,920,3 9,220,35 1,7820,5 1

    AbmessungenDimensionsd1 d2

    18 7,2518 818 8,518 9,518 11

    18,1 1,618,2 1,718,2 318,2 3,818,29 4,75

    18,3 2,418,3 2,6218,3 3,6018,3 418,4 2,7

    18,42 1,0218,42 5,3318,5 118,5 1,218,5 1,5

    18,5 218,5 2,518,5 318,6 2,418,6 2,7

    18,64 3,5318,7 318,72 2,6218,75 1,218,77 1,78

    18,8 1,8518,8 2,418,8 319 119 1,5

    19 1,619 1,719 1,719 1,819 2

    19 2,219 2,419 2,519 2,6519 3

    AbmessungenDimensionsd1 d2

    19 3,219 3,519 419 4,519 4,8

    19 519 619 719 819 9

    19 1019,05 1,7819,05 2,6219,1 1,619,18 2,46

    19,2 2,519,2 319,3 2,419,4 1,319,4 2,4

    19,45 819,46 2,0319,5 119,5 1,519,5 1,78

    19,5 219,5 2,419,5 2,519,5 2,719,5 3

    19,5 3,519,5 419,5 5,319,5 619,5 8

    19,5 8,419,6 2,419,6 3,5319,6 419,6 6,2

    19,7 3,519,7 3,619,8 1,319,8 1,7819,8 1,98

    AbmessungenDimensionsd1 d2

    20,5 1,520,5 220,5 2,420,5 2,520,5 3

    20,5 3,220,5 420,6 2,420,62 4,7820,63 2,62

    20,8 2,421 121 1,521 221 2,4

    21 2,521 321 3,521 421 4,5

    21 4,7521 521 621 6,521 8

    21 8,521 1021 1221,1 1,621,1 1,9

    21,2 1,7821,2 2,521,2 2,6521,2 321,2 3,55

    21,2 4,921,3 2,421,3 3,621,4 421,5 1

    21,5 1,521,5 1,721,5 221,5 2,421,5 2,5

    14

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    21,5 2,521,5 321,5 421,5 4,521,5 7,2

    21,59 5,321,6 2,421,6 14,421,7 121,8 1,5

    21,8 2,421,8 321,82 3,521,89 2,621,9 2,3

    21,92 2,921,95 1,722 122 1,222 1,3

    22 1,422 1,522 1,822 222 2,3

    22 2,522 2,622 322 3,522 4

    22 4,522 522 5,522 622 6,722 7,5

    22 822 922 11,22,1 1,6

    22,16 5,322,2 322,22 2,622,22 3,522,26 6,3

    AbmessungenDimensionsd1 d2

    24 4,824 524 5,524 624 8

    24 8,7524 924 1024,2 324,3 2,4

    24,3 4,224,5 124,5 1,524,5 1,824,5 2

    24,5 2,424,5 2,524,5 324,5 3,6524,5 4,5

    24,6 1,824,6 2,424,6 2,924,6 324,6 3,4

    24,6 3,624,66 1,7824,7 1,724,7 2,6724,77 5

    24,77 5,3324,8 124,8 1,524,8 2,224,9 3,6

    24,99 3,5325 125 1,225 1,425 1,5

    25 225 2,425 2,525 2,625 2,65

    AbmessungenDimensionsd1 d2

    22,3 2,422,3 2,722,33 1,0222,4 1,522,4 2,65

    22,4 3,1522,4 3,5522,42 1,7822,5 122,5 1,5

    22,5 222,5 2,522,5 322,5 3,2522,5 3,5

    22,5 422,5 4,522,5 722,6 1,122,6 1,8

    22,6 3,222,67 1,7822,7 1,522,7 1,7822,7 2,6

    22,8 1,522,9 1,4523 123 1,223 1,4

    23 1,523 1,723 223 2,523 323 3,5

    23 3,623 423 4,523 5

    23 5,323 5,523 623 6,523 7

    AbmessungenDimensionsd1 d2

    23 823 923 1023 1123,17 5,33

    23,3 2,423,35 1,7823,4 3,5323,4 5,823,47 2,62

    23,47 2,9523,5 123,5 1,223,5 1,523,5 1,78

    23,5 223,5 2,423,5 2,523,5 323,5 3,5

    23,5 523,5 5,2523,5 623,5 6,523,5 8,4

    23,53 1,7823,59 123,6 2,6523,6 3,1523,6 3,2

    23,6 3,5523,7 3,523,81 1,7823,81 2,6223,99 2,62

    24 124 1,224 1,524 224 2,1

    24 2,524 324 3,524 424 4,5

    AbmessungenDimensionsd1 d2

    25 325 3,225 3,525 3,5525 4

    25 4,325 4,525 525 5,725 6

    25 6,525 725 7,525 825 9

    25 1025 1225 1325 1525,04 2,95

    25,07 2,6225,1 1,625,12 1,7825,12 2,0325,2 1,8

    25,2 325,3 1,625,3 2,425,4 3,5325,5 1

    25,5 1,525,5 1,625,5 1,825,5 225,5 2,5

    25,5 325,5 3,525,5 3,725,67 1,7825,8 3,53

    26 126 1,226 1,526 226 2,1

    15

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    26 2,526 326 3,526 3,726 4

    26 4,526 526 5,526 626 6,5

    26 726 826 8,7526,2 2,326,2 3

    26,2 3,626,3 2,426,34 5,3326,5 1,226,5 1,5

    26,5 226,5 2,526,5 2,6526,5 326,5 3,15

    26,5 3,526,5 3,5526,5 426,5 826,58 3,53

    26,59 2,9526,64 2,6226,7 1,7826,8 326,8 6,6

    27 127 1,327 1,527 227 2,5

    27 2,6727 2,8327 327 3,227 3,5

    AbmessungenDimensionsd1 d2

    29 4,529 529 5,229 629 8

    29 1629,1 1,629,1 2,529,2 329,3 3,6

    29,5 129,5 1,229,5 1,529,5 229,5 2,3

    29,5 2,529,5 329,5 4,529,5 529,5 5,5

    29,5 5,729,5 8,529,51 5,3329,6 2,429,7 1

    29,7 329,7 6,529,74 2,9529,75 129,75 3,53

    29,82 2,6229,87 1,5229,87 1,7830 130 1,2

    30 1,530 1,830 230 2,430 2,5

    30 2,6530 330 3,1530 3,530 4

    AbmessungenDimensionsd1 d2

    27 427 4,527 527 5,527 6

    27 6,527 727 827 1227,1 6

    27,2 5,727,3 2,427,3 2,727,3 3,227,4 2,5

    27,4 2,727,4 3,5327,5 127,5 1,127,5 1,5

    27,5 227,5 2,327,5 2,427,5 2,527,5 3

    27,5 3,227,5 4,527,5 6,827,56 3,1727,6 2,4

    27,8 1,527,8 2,127,8 3,227,8 3,627,8 8

    27,93 5,3328 128 1,528 1,728 1,9

    28 228 2,528 2,6228 2,6528 3

    AbmessungenDimensionsd1 d2

    28 3,1528 3,528 3,6528 3,728 4

    28 4,328 4,528 528 628 6,25

    28 728 828 8,528 8,7528 10

    28 1328,1 2,6228,1 4,328,17 3,5328,2 1

    28,2 328,25 2,6228,25 2,828,3 1,7828,3 2,4

    28,42 2,6228,5 128,5 1,528,5 228,5 2,5

    28,5 328,5 3,328,5 4,528,5 7,928,5 10

    28,58 9,5328,7 3,529 129 1,529 1,8

    29 229 2,529 329 3,529 4

    AbmessungenDimensionsd1 d2

    30 4,430 4,530 530 5,530 6

    30 730 7,530 830 930 10

    30 1130 1230 1330 17,530,1 2,62

    30,2 130,2 330,3 2,430,3 5,730,35 3,6

    30,4 4,830,43 1,7830,5 1,530,5 2,530,5 2,62

    30,5 2,930,5 330,5 3,6530,5 1530,8 3,53

    30,8 3,630,8 3,730,81 3,7830,95 2,6431 1,5

    31 231 2,231 2,531 331 3,5

    31 3,831 431 4,531 531 5,5

    16

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    31 631 831 9,531 1431,1 4,3

    31,12 5,3331,2 331,34 1,9831,34 3,5331,42 1,5

    31,42 2,6231,47 1,7831,5 1,231,5 1,531,5 1,75

    31,5 231,5 2,531,5 2,6531,5 331,5 3,15

    31,5 3,531,5 3,5531,5 3,6531,5 431,5 4,5

    31,5 531,5 631,5 6,531,6 2,431,63 2

    31,75 2,0331,75 3,1731,8 131,8 1,532 1

    32 1,132 1,332 1,532 1,632 2

    32 2,232 2,432 2,532 2,832 3

    AbmessungenDimensionsd1 d2

    34 334 3,2534 3,534 434 4,5

    34 534 5,534 5,7534 634 7

    34 7,534 834 1034 1234,1 3,6

    34,2 2,334,2 334,29 1,1934,29 5,3334,42 2,95

    34,5 1,534,5 1,734,5 234,5 2,534,5 2,65

    34,5 334,5 3,6534,5 3,734,5 4,534,5 5,5

    34,52 3,5334,59 2,6234,6 2,434,65 1,7834,7 4,3

    34,93 6,3535 135 1,235 1,535 2

    35 2,135 2,1535 2,235 2,535 2,8

    AbmessungenDimensionsd1 d2

    32 3,232 3,532 432 4,232 4,5

    32 532 5,532 632 6,232 7

    32 832 932 1032 1132 12

    32 13,532,1 1,632,2 1,432,2 332,3 6,2

    32,5 1,532,5 1,832,5 232,5 2,232,5 2,4

    32,5 2,532,5 2,6532,5 332,5 3,5532,5 3,6

    32,5 432,6 1,232,6 2,432,69 5,3332,7 1,3

    32,75 1,5732,92 2,3932,92 3,5333 1,233 1,5

    33 233 2,533 2,6233 333 3,5

    AbmessungenDimensionsd1 d2

    33 433 4,533 533 5,733 6

    33 6,533 733 833 933 10

    33 1233,05 1,7833,12 1,5233,21 3,5333,27 1,78

    33,3 2,433,3 433,3 533,32 3,5333,34 2,38

    33,4 2,933,4 333,4 4,333,5 133,5 1,5

    33,5 233,5 2,533,5 2,6533,5 333,5 3,15

    33,5 3,5533,5 433,55 3,7133,6 1,7833,7 3,7

    33,99 2,3434 134 1,134 1,234 1,5

    34 234 2,334 2,534 334 3,25

    AbmessungenDimensionsd1 d2

    35 335 3,235 3,535 435 4,5

    35 535 5,335 635 735 8

    35 935 1035 1535,1 1,635,2 1

    35,2 2,435,2 2,535,2 335,2 535,2 5,7

    35,31 2,6235,5 2,535,5 2,6235,5 2,6535,5 3

    35,5 3,1535,5 3,5535,5 435,5 4,535,52 2,53

    35,6 3,635,7 2,6235,97 1,7836 1,536 1,78

    36 236 2,336 2,536 336 3,2

    36 3,536 436 4,536 536 5,7

    17

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    36 636 736 836 936 10

    36 1136 1636,1 3,5336,17 2,3836,17 2,62

    36,2 1,5236,2 2,436,2 2,6536,2 336,2 5,7

    36,27 1,7836,5 136,5 236,5 2,536,5 2,65

    36,5 336,5 3,536,5 3,5536,5 3,7536,7 2

    36,8 136,8 1,236,8 336,9 5,337 1

    37 1,537 237 2,537 2,637 3

    37 3,537 437 4,537 537 5,5

    37 637 837 937 1037 15

    AbmessungenDimensionsd1 d2

    39,4 6,639,4 1039,45 1,7839,5 1,239,5 1,5

    39,5 239,5 2,539,5 339,5 5,539,5 6

    39,6 2,439,6 3,739,69 2,3839,69 3,5339,7 4,35

    39,9 3,5340 140 1,240 1,540 1,6

    40 1,840 240 2,540 340 3,15

    40 3,240 3,540 3,5540 440 4,5

    40 540 5,2540 5,340 5,540 6

    40 740 7,540 840 1040 11

    40 1240 1340,04 2,6240,2 340,2 5,3

    AbmessungenDimensionsd1 d2

    37,1 137,1 1,637,2 337,2 5,737,21 2,62

    37,3 3,537,3 3,637,47 337,47 5,3337,5 1,25

    37,5 1,537,5 237,5 2,537,5 2,6537,5 3

    37,5 3,1537,5 3,5537,5 4,537,5 8,237,5 9

    37,5 1037,6 2,437,69 3,5337,7 2,937,7 3

    37,7 5,5337,77 2,6237,8 237,82 1,7837,9 2,75

    38 138 1,238 1,538 1,738 2

    38 2,538 338 3,538 438 4,5

    38 538 5,338 638 6,538 7

    AbmessungenDimensionsd1 d2

    38 838 938 1038 1238,3 4

    38,4 1,638,4 238,4 438,5 1,538,5 2

    38,5 2,538,5 338,5 3,538,5 438,5 6,5

    38,5 8,538,7 2,6538,7 3,5538,9 1,4539 1

    39 1,539 1,639 1,7839 239 2,5

    39 339 3,239 3,539 439 4,5

    39 539 5,539 639 6,339 6,5

    39 1039,1 1,339,2 339,2 3,739,2 3,9

    39,2 539,2 5,739,2 639,34 2,6239,37 2,34

    AbmessungenDimensionsd1 d2

    40,5 2,540,5 3,540,5 4,540,59 2,6240,6 3,2

    40,65 5,3340,87 3,5340,95 2,6240,99 5,3341 1

    41 1,541 1,641 1,7541 1,7841 2

    41 2,541 341 3,541 441 4,5

    41 541 641 7,541 841 15

    41,2 341,2 4,741,2 5,741,25 1,2541,28 3,53

    41,28 4,7641,3 2,441,4 5,341,5 1,541,5 2,9

    41,5 341,5 3,1541,5 641,6 1,7841,6 2,4

    41,82 3,5342 142 1,542 242 2,5

    18

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    42 2,742 342 3,542 442 4,5

    42 542 5,542 642 6,442 6,5

    42 742 842 942 1042 11,7

    42 1342 1442 1642 2042,2 1,5

    42,2 342,4 1,242,5 1,7842,5 342,5 3,15

    42,5 3,5542,5 5,342,52 2,6242,57 3,5342,8 3,7

    42,86 3,5342,92 2,6143 1,543 1643 2

    43 2,543 2,743 2,843 343 3,5

    43 443 4,543 543 5,243 5,5

    AbmessungenDimensionsd1 d2

    46 1046 1146,04 3,5346,2 246,2 3

    46,2 3,5546,2 5,346,4 5,446,5 1,846,5 2

    46,5 5,3346,5 7,247 1,547 1,647 2

    47 2,1347 2,547 347 3,247 3,5

    47 3,747 447 4,547 547 5,33

    47 5,547 647 747 847 9

    47 1047,2 5,747,22 3,5347,29 2,6247,37 1,78

    47,4 447,4 4,847,5 1,747,5 3,247,5 3,5

    47,5 447,5 5,347,5 5,7547,5 6,547,6 2,4

    AbmessungenDimensionsd1 d2

    43 643 843 1043 2043,3 4,15

    43,4 1,543,4 1,843,4 3,643,5 1,543,5 3

    43,5 443,69 343,7 3,543,7 3,5543,7 5,3

    43,82 5,3343,99 2,0144 1,544 244 2,5

    44 344 3,544 444 4,544 5

    44 5,544 644 6,544 844 11

    44,04 3,5344,12 2,6244,17 1,7844,2 244,2 3

    44,2 5,144,2 5,744,3 5,744,4 4,844,45 3,53

    44,5 2,444,5 344,5 3,1844,5 644,5 6,25

    AbmessungenDimensionsd1 d2

    44,5 8,544,6 2,444,7 3,545 145 1,5

    45 245 2,545 345 3,545 3,55

    45 445 4,545 545 5,345 5,5

    45 645 745 845 9 45 10

    45 1245 1545,2 345,2 5,745,3 5,7

    45,36 3,5345,5 1,545,5 445,5 5,545,69 2,62

    45,7 1,545,84 1,7846 146 1,546 2

    46 2,546 346 3,546 446 4,5

    46 546 5,3446 646 746 8

    AbmessungenDimensionsd1 d2

    47,63 3,547,7 1,547,7 4,7547,8 347,96 2,36

    48 148 1,248 1,548 1,748 2

    48 2,548 348 3,548 3,648 3,65

    48 448 4,548 548 5,548 6

    48 6,548 748 848 948 10

    48 1348 1648,1 1,248,32 5,3348,5 1,5

    48,5 348,5 448,5 648,7 3,5548,7 5,3

    48,9 2,6249 149 1,549 249 2,5

    49 349 3,549 449 4,549 5

    19

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    49 5,549 649 6,549 749 9

    49,1 6,849,2 1,849,2 349,2 5,749,21 3,53

    49,22 3,9649,3 5,749,4 849,5 2,549,5 3

    49,6 2,449,6 5,749,7 2,549,7 5,350 1,5

    50 250 2,550 350 3,2550 3,5

    50 3,5550 450 4,550 550 5,3

    50 5,3350 5,550 5,750 650 6,5

    50 6,750 750 850 950 10

    50 10,550 1150 1250 1550 16

    AbmessungenDimensionsd1 d2

    53,65 2,6253,67 1,7853,97 4,7653,97 5,1653,98 3,53

    53,98 6,3554 154 1,554 254 2,5

    54 354 3,254 3,554 454 4,9

    54 554 5,554 654 754 8

    54,2 1,6554,2 354,2 5,754,3 1,7854,3 5,7

    54,38 1,1954,4 5,354,5 354,5 3,5554,5 5,3

    54,5 754,6 2,454,61 3,354,75 255 1

    55 1,255 1,555 255 2,555 3

    55 3,255 3,555 3,755 455 5

    AbmessungenDimensionsd1 d2

    50,16 5,3350,17 1,7850,2 350,25 3,650,3 2,4

    50,4 3,5350,47 2,6250,5 2,450,5 350,5 6,3

    50,5 2050,52 1,7850,8 1,7850,8 3,5351 1,5

    51 251 2,551 351 3,251 3,5

    51 3,651 451 4,551 551 5,2

    51 5,551 651 951 1051,2 5,7

    51,35 1,7851,5 1,551,5 3,5551,5 5,351,5 10

    51,6 2,451,6 4,651,8 351,94 3,5351,99 2,77

    52 152 1,552 252 2,552 2,8

    AbmessungenDimensionsd1 d2

    52 352 3,552 452 552 6

    52 6,552 752 852 952 9,5

    52 1052 1252,07 2,6252,1 152,1 6,6

    52,2 352,2 5,752,3 1,752,3 5,752,39 3,53

    52,5 1,7852,5 3,552,5 5,752,9 5,3353 1

    53 1,553 253 2,553 353 3,5

    53 3,5553 453 4,553 553 5,3

    53 653 753 853 1053 17

    53,09 353,19 3,5353,34 5,3353,5 1,253,57 3,53

    AbmessungenDimensionsd1 d2

    55 655 6,555 755 7,555 8

    55 1055 13,555,2 355,2 5,755,25 2,62

    55,3 5,755,5 355,56 3,5355,7 3,7555,88 2,03

    56 1,556 256 2,556 356 3,2

    56 3,556 3,5556 456 4,356 4,5

    56 556 5,256 5,356 5,856 6

    56 856 1056 1256,16 5,3456,2 3

    56,25 2,6256,5 256,5 756,5 1556,52 5,33

    56,74 3,5356,8 656,82 2,6256,87 1,7857 1,3

    20

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    57 1,557 257 2,557 357 3,5

    57 457 4,557 557 5,557 5,7

    57 657 6,557 757 857 9,5

    57 1057,15 2,057,15 3,557,2 357,2 5,7

    57,3 1,557,3 5,257,5 257,5 3,557,5 4,3

    57,5 757,6 1,457,6 2,457,61 2,157,75 4

    58 158 1,558 258 2,558 3

    58 3,258 3,558 3,558 458 5

    58 5,358 5,558 658 758 8

    AbmessungenDimensionsd1 d2

    61 4,561 561 5,961 661 10

    61 1261 1361,01 2,461,2 5,761,24 3,5

    61,5 3,561,5 5,361,6 161,6 2,461,6 2,6

    61,6 2,761,83 2,361,9 3,561,9 6,361,94 2,2

    62 1,562 1,7862 262 2,562 3

    62 3,262 3,562 462 4,562 5

    62 5,562 5,762 662 6,562 7

    62 7,562 1062 1162 1262,2 3

    62,2 5,762,3 3,262,3 5,762,33 1,7862,5 1,3

    AbmessungenDimensionsd1 d2

    58 1058,39 1,7858,4 1,358,42 2,6258,44 1,78

    58,5 358,5 5,3358,6 758,7 6,358,72 6,35

    58,74 3,5358,8 4,259 1,559 1,6259 2,4

    59 2,559 359 3,559 459 5

    59 5,559 659 759 1059,2 5,33

    59,2 5,759,3 559,3 5,759,36 359,39 3,53

    59,4 2,859,5 1,7859,5 359,5 459,5 5

    59,5 659,5 6,559,52 2,6259,6 2,459,7 5,33

    59,7 5,759,8 8,559,9 2,6259,9 5,259,92 3,53

    AbmessungenDimensionsd1 d2

    59,98 6,3560 160 1,2560 1,360 1,5

    60 1,960 260 2,560 2,6260 3

    60 3,360 3,560 3,5560 460 4,2

    60 4,560 560 5,360 5,460 5,7

    60 660 760 860 960 10

    60 1160 1260 1360 1560 18

    60,04 1,7860,2 360,3 1560,33 3,5360,5 2,25

    60,8 7,461 1,561 1,961 261 2,1

    61 2,561 361 3,261 3,561 4

    AbmessungenDimensionsd1 d2

    62,5 1,862,5 562,6 5,762,87 2,0362,87 5,33

    63 1,263 1,563 263 2,563 3

    63 3,263 3,563 3,5563 463 4,5

    63 563 5,363 5,563 663 7

    63 863,09 3,5363,17 2,663,22 1,563,22 1,7

    63,4 163,5 3,163,5 3,563,5 3,763,5 5

    63,5 5,363,5 5,564 1,564 1,664 2

    64 2,564 2,664 364 3,564 4

    64 4,364 4,564 564 5,764 6

    21

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    64 864 1664,2 1,664,2 1,964,2 5

    64,2 5,764,3 1,564,3 5,764,39 1,7864,4 4

    64,5 1,564,5 1,864,5 264,5 2,764,5 3

    64,5 5,564,6 1,5564,6 2,464,7 364,77 2,62

    64,9 6,665 1,565 1,865 265 2,5

    65 2,7565 365 3,565 3,5565 4

    65 4,565 4,865 565 5,365 5,5

    65 665 765 7,565 865 9

    65 1065 10,565 1265 1365,1 3,53

    AbmessungenDimensionsd1 d2

    69,2 5,769,22 5,3369,3 5,769,4 2,869,4 5,2

    69,44 3,5369,5 369,5 3,569,5 469,5 5

    69,5 13,569,52 2,6269,57 1,7869,6 2,469,85 3,53

    69,9 3,1770 170 1,570 1,7870 1,8

    70 270 2,570 370 3,270 3,37

    70 3,570 470 4,570 4,670 5

    70 5,570 5,770 670 6,570 7

    70 7,570 870 1070 1170 15

    70 17,570 2070,2 5,770,5 2,470,5 3

    AbmessungenDimensionsd1 d2

    65,32 1,5665,35 1,5565,5 1,565,5 1,5565,5 3,5

    65,5 565,5 865,5 1565,6 5,366 1,5

    66 266 2,566 366 3,566 3,8

    66 466 4,566 566 666 6,5

    66 7,566 866 9,566,04 1,7866,04 5,33

    66,2 5,766,27 3,5366,35 2,6266,4 1,7866,45 9,39

    66,5 2,566,6 5,766,67 3,5366,7 266,7 3,2

    66,7 5,566,87 3,5367 1,567 267 2,1

    67 2,567 2,767 2,867 367 3,5

    AbmessungenDimensionsd1 d2

    67 3,5567 467 4,367 567 5,33

    67 5,567 667 767 867,2 5,7

    67,6 2,467,95 2,6268 1,568 1768 2

    68 2,468 2,568 368 3,568 4

    68 4,568 568 5,568 668 7

    68 868 1068 1568,26 3,568,5 4

    68,6 2,268,95 5,369 1,569 269 2,5

    69 369 469 4,569 569 5,3

    69 5,769 669 7,569 869 11

    AbmessungenDimensionsd1 d2

    71 1,671 1,6571 271 2,571 2,65

    71 371 3,571 3,5571 471 4,5

    71 571 5,371 771 8,571 9

    71 9,571 1071,12 2,6271,2 271,2 5,7

    71,44 3,5371,5 1,571,5 271,5 672 1,5

    72 272 2,572 372 3,572 4

    72 572 5,572 672 6,9972 7

    72 872 972 1072 1172 12

    72,19 5,3372,2 5,772,4 5,3372,5 3,572,5 8

    22

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    72,62 3,5372,69 2,6272,76 1,7873 1,273 1,5

    73 273 2,573 373 3,573 3,55

    73 473 4,573 573 5,373 6

    73,02 3,5373,39 5,3373,5 4,6573,5 7,2573,8 4,5

    74 174 1,574 274 2,574 2,7

    74 374 3,1574 3,374 3,574 4

    74 4,574 574 5,774 674 7

    74 7,574 7,974 874 1074 14

    74,14 2,6274,2 5,774,3 2,6274,3 5,774,5 3

    AbmessungenDimensionsd1 d2

    78,5 678,74 2,6278,74 5,3378,97 3,5379 1,5

    79 1,7879 279 2,179 2,579 2,6

    79 379 3,579 3,979 479 5

    79 5,779 679 779,05 2,6279,2 2,7

    79,2 5,779,3 5,379,3 5,779,4 4,7579,5 2,3

    79,5 2,579,5 379,5 5,279,5 779,77 5,33

    80 1,2580 1,380 1,580 1,7580 1,78

    80 280 2,580 2,880 380 3,2

    80 3,580 3,5580 3,880 480 4,3

    AbmessungenDimensionsd1 d2

    74,6 3,5374,63 5,3375 1,575 1,7875 2

    75 2,575 2,775 375 3,575 3,55

    75 475 4,575 4,975 575 5,3

    75 5,575 5,875 675 775 7,5

    75 875 975 1075 12,575 16

    75 275,5 275,57 5,3375,7 9,575,8 3,53

    75,87 2,6275,92 1,7876 176 1,576 2

    76 2,576 376 3,576 476 4,1

    76 4,2276 4,576 4,7676 576 6

    AbmessungenDimensionsd1 d2

    76 776 7,6576 876 1076 11

    76 1376 1576,2 6,876,3 2,476,5 2,5

    76,8 1,277 1,577 277 2,577 3

    77 3,577 477 577 5,577 10

    77,2 5,777,4 6,677,5 1,477,5 2,577,5 2,62

    77,5 3,5577,5 5,377,5 678 1,278 1,5

    78 1,7878 278 2,578 378 3,5

    78 478 4,378 578 5,578 6

    78 1078 1378,5 1,7878,5 2,578,5 5,8

    AbmessungenDimensionsd1 d2

    80 4,580 4,880 580 5,380 5,5

    80 680 6,580 880 1080 12

    80 1580 16,580,42 2,6280,5 1,7580,5 2,4

    80,5 580,5 780,6 2,6280,8 2,380,8 2,6

    81 1,581 1,981 281 2,581 3

    81 481 4,581 581 681 7

    81 1481,2 1,281,2 5,781,5 1,2581,5 1,5

    81,5 281,5 481,5 681,7 1,7881,7 7

    81,92 5,382 1,3582 1,582 282 2,4

    23

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    82 2,582 382 3,582 482 5

    82 5,582 6,582 782 882 10

    82,14 3,5382,2 5,782,22 2,6282,27 5,3382,28 1,78

    82,5 3,5582,5 482,5 582,5 5,382,6 2,2

    82,8 582,87 5,3383 183 1,583 2

    83 2,583 383 3,583 483 4,5

    83 583 5,583 983,05 3,5183,2 2,62

    83,5 1,2583,5 383,8 2,6284 1,584 2

    84 2,984 384 3,584 484 5

    AbmessungenDimensionsd1 d2

    88 7,588 888 1288 1588,1 3,6

    88,27 5,3388,3 2,6288,3 788,49 5,5788,5 3,53

    88,5 1088,57 2,6288,6 10,588,62 1,7888,9 3,96

    88,9 1589 1,589 289 2,489 2,5

    89 389 3,589 489 4,589 5

    89 5,789 689 789 889 8,5

    89 1189 1289,1 5,189,1 5,889,2 3

    89,2 5,789,3 5,789,4 289,5 289,5 2,5

    89,5 389,5 7,589,6 3,1589,69 5,3390 1

    AbmessungenDimensionsd1 d2

    84 5,784 684 884 984,2 5,7

    84,3 2,684,3 5,784,5 384,5 585 1,5

    85 1,7885 285 2,585 385 3,5

    85 3,5585 485 4,585 4,985 5

    85 5,385 5,585 685 6,585 7

    85 885 1085 1285 1485 16

    85,09 5,3385,3 185,32 3,5385,34 1,7885,5 2,5

    85,5 685,6 3,286 1,286 1,586 1,7

    86 286 2,586 2,786 386 3,5

    AbmessungenDimensionsd1 d2

    86 486 4,186 4,586 586 6

    86 6,486 786 7,586 886 12

    86,3 2,686,5 386,5 686,7 387 1,5

    87 287 2,587 387 3,587 4

    87 4,487 587 787 887,1 2,4

    87,2 2,587,2 5,787,35 2,6287,5 3,5587,5 4

    87,5 587,5 5,387,5 6,288 1,588 2

    88 2,288 2,588 388 3,588 4

    88 588 5,588 5,788 688 7

    AbmessungenDimensionsd1 d2

    90 1,590 290 2,590 2,990 3

    90 3,590 3,5590 490 4,590 4,6

    90 590 5,390 5,590 690 6,25

    90 6,390 790 7,590 890 8,5

    90 990 1090 1190 1490 15

    90,3 490,77 491 1,591 291 2,5

    91 391 3,591 491 591 8

    91,2 5,791,44 5,3391,67 3,5391,7 1,7892 1

    92 1,592 292 2,592 392 3,2

    24

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    92 3,592 492 4,592 592 5,3

    92 5,592 692 792 7,592 8

    92 8,592 1092,2 5,792,5 292,5 3,55

    92,5 5,392,62 5,3392,99 2,0393 1,593 1,78

    93 293 2,593 2,893 393 3,5

    93 493 593 693 6,593 12

    93 2093,2 9,593,5 4,593,75 294 1

    94 1,594 294 2,394 2,594 3

    94 3,594 494 594 5,794 7

    AbmessungenDimensionsd1 d2

    98 7,598 998,02 3,5398,05 1,7898,5 1,5

    98,5 5,399 1,599 299 2,599 3

    99 3,599 499 599 5,599 5,7

    99 699 799 899 1299,1 2,4

    99,2 5,799,3 5,799,4 6,399,5 3100 1

    100 1,3100 1,5100 2100 2,5100 2,65

    100 3100 3,5100 3,55100 4100 4,5

    100 4,7100 5100 5,33100 5,5100 5,8

    100 6100 6,5100 7100 7,5100 8

    AbmessungenDimensionsd1 d2

    94 894 994 10,594 1294 20

    94,2 5,794,3 5,794,5 394,62 5,3394,84 3,53

    94,93 2,6294,97 1,7895 195 1,595 1,8

    95 295 2,595 395 3,595 3,55

    95 495 4,595 595 5,395 5,5

    95 695 6,395 795 7,595 8

    95 1095 1295 1495 1595,25 4,76

    95,5 395,5 495,5 695,5 1595,64 6,99

    96 1,596 1,796 296 2,596 2,62

    AbmessungenDimensionsd1 d2

    96 396 3,596 496 4,396 5

    96 5,3396 696 796 896,11 2,62

    96,5 2,6296,5 6,597 1,597 1,697 2

    97 2,597 397 3,597 3,897 4

    97 597,2 5,797,5 1,7597,5 297,5 3,55

    97,5 4,597,5 597,5 5,397,5 5,597,5 6

    97,79 6,3597,8 3,5397,8 5,3398 198 1,5

    98 298 2,598 398 3,598 4

    98 4,598 598 5,598 5,898 6

    AbmessungenDimensionsd1 d2

    100 10100 12100 12,5100 16100,5 2,4

    100,5 3,5100,5 4,5100,5 5,3100,97 5,33100,97 6,99

    101 2101 2,5101 3101 3,5101 4

    101 4,3101 4,5101 5101 5,33101 6

    101 7101,2 3,53101,2 57101,27 2,62101,34 1,78

    101,5 3101,6 3,2101,6 5,7101,8 3,4102 2

    102 2,5102 3102 3,5102 4102 5

    102 8102 14102,5 2,4102,5 2,5102,5 9,3

    102,8 9,5103 1,5103 2103 2,5103 3

    25

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    103 3,5103 3,55103 4103 4,5103 5 103 5,3103 6103 10103 12103,3 5,7

    103,5 1,5103,5 4103,5 4,5104 1,5104 1,78

    104 2,5104 2,9104 3104 3,5104 4

    104 4,5104 5104 5,7104 6104 7

    104 8104 13104 16104,14 5,33104,14 6,99

    104,2 3104,2 5,7104,37 3,53104,4 1,78104,5 3

    104,5 6104,6 4,4104,6 5,7105 1,78105 2

    105 2,5105 3105 3,5105 4105 4,5

    AbmessungenDimensionsd1 d2

    110 3110 3,5110 4110 4,5110 4,6

    110 5110 5,5110 6110 6,5110 7

    110 7,5110 8110 9110 10110 11

    110 12110 15110 20110,3 2,4110,49 5,33

    110,72 3,53110,74 1,78111 2,5111 3111 3,5

    111 4111 5111 6111 15111,5 2,5

    111,5 3111,5 5111,8 3,53112 1,5112 2

    112 3,5112 3112 3,5112 3,55112 4

    112 4,5112 5112 5,3112 6112 6,3

    AbmessungenDimensionsd1 d2

    105 5105 5,5105 5,8105 5,9105 6

    105 7105 7,25105 7,5105 8105 9,5

    105 10105 14105 15105,1 2105,1 4,5

    105,5 2,1105,5 2,4106 2106 2,5106 2,62

    106 3106 3,5106 3,55106 4106 4,5

    106 5106 5,3106 5,5106 6106 6,3

    106 7106 8106 10106 12106,5 2,4

    106,5 4,75106,5 4,8106,6 6,4106,7 5,7107 2

    107 2,5107 3107 3,5107 4107 4,3

    AbmessungenDimensionsd1 d2

    107 5107 7107 9107 14107 15

    107,32 5,33107,54 3,53107,6 3,6107,63 2,62107,7 1,78

    108 2,5108 3108 3,2108 3,5108 4

    108 4,5108 5108 5,8108 6108 7

    108 8108 10108 11108 12108,3 3,8

    109 2109 2,5109 3109 3,5109 3,55

    109 4109 5109 5,3109 5,5109 5,7

    109 9109,2 5,7109,3 5,7109,5 3109,54 5,33

    110 1,5110 1,78110 2110 2,25110 2,5

    AbmessungenDimensionsd1 d2

    112 8113 2113 2,5113 3113 3,5

    113 4113 5113 5,8113 8113,02 2,62

    113,1 2,45113,5 2113,5 5,33113,5 6,8113,67 5,33

    113,67 6,99113,7 1,9113,9 3,53113,98 2,62114 1,3

    114 1,5114 1,6114 1,78114 2114 2,5

    114 3114 3,5114 4114 5114 5,5

    114 5,7114 6114 6,5114 7114 8

    114 9114 10114 10,5114 12114 14

    114 15114 17114,2 5,7114,3 4,7114,3 5,7

    26

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    114,3 15114,4 3,8114,5 3114,5 3,3114,5 4

    114,6 5,7114,7 6,99115 2115 2,5115 3

    115 3,5115 3,55115 3,6115 4115 4,1

    115 4,5115 5115 5,1115 5,3115 5,5

    115 6115 6,5115 7115 7,5115 8,5

    115 9115 15115 20115,7 5,7115,8 5,8

    116 2,5116 3116 3,5116 4116 5

    116 6116 7,5116 10116 12116 14

    116,4 3,17116,7 4,4116,84 5,33116,84 6,99117 2,5

    AbmessungenDimensionsd1 d2

    122 5122 5,3122 5,5122 6122 8

    122 18122 20122,5 2122,5 5,8123 2,1

    123 2,5123 3123 3,3123 3,5123 4

    123 5123 6123 6,3123 6,5123 7

    123 12123,2 5,33123,2 6,99123,26 3,68123,3 2,8

    123,42 3,53123,44 1,78123,5 3,5123,5 4123,8 3,2

    123,8 5,33124 2,5124 3124 3,2124 3,5

    124 4124 4,5124 5124 5,4124 5,7

    124 6124 8124 18124,2 5,7124,2 6,99

    AbmessungenDimensionsd1 d2

    117 2,75117 3117 3,5117 4117 4,2

    117 5117 7117 8117 10117,07 3,53

    117,07 4,4117,1 1,78117,48 5,33117,5 4117,5 5

    117,5 5,33118 2118 2,5118 2,62118 3

    118 3,5118 3,55118 4118 4,2118 4,5

    118 5118 5,3118 6118 13118,4 4

    118,5 3119 2119 2,5119 3119 3,5 119 4119 5119 5,7119 6,2119 7

    119 8119 10119,2 5,2119,2 5,7119,3 5,7

    AbmessungenDimensionsd1 d2

    119,5 3119,5 7120 2120 2,2120 2,5

    120 3120 3,2120 3,5120 4120 4,5 120 5120 6120 6,5120 7120 8,5

    120 10120 16120 20120,02 5,33120,02 6,99 120,25 3,53120,33 2,62120,4 1,78120,5 6,8120,5 12 120,7 5,33120,82 2,62121 2,5121 3121 3,5

    121 4121 5121,5 1,2121,5 2,2121,5 4

    121,5 5,7122 1,25122 1,3122 2122 2,5

    122 3122 3,5122 3,55122 4122 4,5

    AbmessungenDimensionsd1 d2

    124,3 5,7124,5 3124,5 4124,5 5124,6 3,5

    124,6 5,7124,6 6,99125 1,5125 2125 2,5

    125 3125 3,5125 3,55125 4125 5

    125 5,3125 6125 7125 7,5125 8

    125 8,5125 9125 10125 12,5126 2,2

    126 2,4126 2,5126 3126 3,5126 4

    126 4,5126 5126 6126 7126 10

    126,37 5,33126,37 6,99126,5 3126,57 5,33126,6 3,53

    126,67 2,62126,76 1,78126,9 6,4127 2,5127 3

    27

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    127 3,5127 4127 5127 5,33127 8

    127 10127,5 3127,5 4127,5 5,8127,5 6,8

    128 2128 2,5128 3128 3,5128 3,55

    128 4128 4,5128 5128 5,3128 6

    128 6,6128 7,5128 8,5128 9128 10

    128 13128 15,5128,5 3,5128,5 4129 2,5

    129 3129 3,5129 4129 5129 5,5

    129 8129,2 5,7129,3 5,7129,4 1,78129,5 3

    129,5 5129,54 5,33129,54 6,99129,77 3,53130 1,5

    AbmessungenDimensionsd1 d2

    134 4134 4,5134 5134 6134 6,8

    134,2 4134,2 5,7134,3 5,7134,47 2,62134,5 3

    134,5 4,5134,5 5134,5 6,99134,6 5,7135 1,5

    135 2135 2,5135 3135 3,5135 4

    135 4,1135 4,5135 5135 6135 7

    135 7,5135 10135 10,2135 17,5135,7 3,53

    135,76 1,78135,9 5,33135,9 6,99136 2,5136 3

    136 3,5136 3,55136 4136 4,25136 5

    136 5,3136 6136 7136 8136 12

    AbmessungenDimensionsd1 d2

    130 2130 2,5130 3130 3,5130 4

    130 4,2130 4,3130 4,5130 5130 5,5

    130 6130 6,35130 6,5130 7130 7,5

    130 8130 10130 10,8130 12130 20

    130,18 5,33130,5 4130,7 2131 1,58131 1,7

    131 2131 2,5131 3131 3,5131 4

    131 4,5131 5131 5,3131 10131 10,2

    131,2 5,7131,5 4,5131,57 1,78131,6 5,7131,8 1,78

    132 1,5132 1,7132 1,8132 2132 2,5

    AbmessungenDimensionsd1 d2

    132 3132 3,5132 3,55132 4132 4,5

    132 5132 5,3132 5,65132 6132 8

    132,2 5,7132,5 1,6132,72 5,33132,72 6,99132,8 5,8

    132,9 2,5132,94 3,53133 2,5133 2,62133 3

    133 3,2133 3,25133 3,5133 4133 4,4

    133 4,5133 5133 7133 10133 12

    133 13133,07 1,78133,2 5,7133,3 6,4133,35 5,33

    133,5 4133,5 7133,6 2,2133,8 8,4133,82 2,62

    134 1,6134 2,5134 3134 3,2134 3,5

    AbmessungenDimensionsd1 d2

    136,08 2,62136,12 3,53136,5 4136,53 5,33137 2,5

    137 2,62137 3137 3,5137 4137 4,5

    137 5137 6,5137 7137 8137,5 2,5

    138 2,1138 2,5138 3138 3,5138 4

    138 5138 5,3138 6138 7138 8

    138 10138 10,2138 19138,5 6,55138,94 1,78

    139 2,5139 3139 3,5139 4139 5

    139 6139 7139,07 5,33139,07 6,99139,2 5,7

    139,2 6139,3 3,53139,3 5,7139,38 2,62139,5 3

    28

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    139,6 5,7139,7 4,75139,7 5,33139,7 15140 1,5

    140 1,78140 2140 2,5140 3140 3,5

    140 3,55140 3,75140 4140 4,3140 4,5

    140 5140 5,3140 6140 7140 7,5

    140 8140 10140 12140 14140 15

    140 16140,46 4,88140,5 4,5141 2,5141 3

    141 3,5141 4141 4,5141 5141 7

    141,5 3142 2,5142 2,62142 3142 3,5

    142 4142 5142 6142 6,3142 7

    AbmessungenDimensionsd1 d2

    148,46 1,78148,5 4148,5 5148,5 7,5148,6 5,33

    148,6 6,99148,82 3,53149 2,5149 2,7149 3

    149 3,5149 4149 5149 7149,1 8,4

    149,2 3,2149,2 5,7149,2 6,2149,23 5,33149,3 5,7

    149,5 2149,5 3150 1,2150 2150 2,5

    150 3150 3,5150 3,55150 4150 4,5

    150 5150 5,3150 5,4150 5,5150 6

    150 6,35150 7150 8150 9150 12

    150 15151 3151 3,5151 4151 5

    AbmessungenDimensionsd1 d2

    142 7,5142 10142,11 1,78142,24 5,33142,24 6,99

    142,47 3,53142,5 3142,5 5142,8 5,8142,88 5,33

    143 1,78143 2143 2,5143 3143 3,5

    143 3,97143 4143 5143 5,7143,5 1,6

    143,5 1,78144 2,5144 3144 3,5144 3,7

    144 4144 4,5144 5144 8144,1 8,4

    144,2 5,7144,3 5,7144,5 3144,6 5,7145 1,5

    145 2,5145 3145 3,5145 3,55145 4

    145 4,2145 5145 5,3145 6145 7

    AbmessungenDimensionsd1 d2

    145 7,5145 8145 10145 12145,29 1,78

    145,42 5,33145,42 6,99145,45 6,55145,65 3,53145,72 2,62

    145,77 1,78146 2146 2,5146 3146 3,5

    146 4146 4,57146 5146 6146 7

    146 8146 10,2146 12146,05 5,33146,5 4

    147 1,78147 2,5147 3147 3,5147 4

    147 5147 5,7147 15147,5 3148 1,78

    148 2148 3148 3,5148 4148 5

    148 5,5148 6148 7148 8148 10

    AbmessungenDimensionsd1 d2

    151,64 1,78151,77 5,33151,77 6,99151,99 3,53152 2

    152 2,5152 3152 3,5152 4152 5

    152 5,5152 7152 7,5152 10152 12

    152,07 2,62152,2 5,5152,4 4,87152,5 2,5152,5 7

    152,7 1,7153 2153 2,5153 3153 3,5

    153 4153 4,5153 5153 6153 10

    153,5 1,6153,5 3153,5 5153,5 6,8154 3

    154 3,5154 4154 5154 6154 7

    154,1 8,4154,2 5,7154,3 5,7154,4 4154,5 3

    29

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    154,81 1,78155 1,5155 1,7155 2,5155 3

    155 3,5155 3,55155 4155 4,5155 5

    155 5,3155 5,33155 5,7155 6155 7,5

    155 8155 15155,5 6155,5 7155,6 6,99

    156 2156 2,5156 3156 3,5156 4

    156 5156 6156 10156 12156 16

    156,11 6,22156,3 5,7157 3157 3,5157 4

    157 5157 6157 6,55157 8,3157 10,5

    157 20158 1,78158 3158 3,5158 4

    AbmessungenDimensionsd1 d2

    164,47 5,33164,47 6,99164,5 2164,5 3164,7 3,53

    164,78 2,62165 2165 2,4165 2,5165 3

    165 3,5165 3,55165 4165 4,5165 5

    165 5,3165 5,5165 6165 6,5165 7

    165 7,5165 8165 10165 14165 16

    165 20165,1 3,17165,4 5,33165,5 4166 1,78

    166 3166 3,5166 4166 5166 6

    166,7 6,99166,75 2167 2,5167 3167 3,5

    167 4167 5167 7167,51 1,78167,7 5,33

    AbmessungenDimensionsd1 d2

    158 5158 6158 7158 8158 11

    158 12158,12 2,62158,12 5,33158,12 6,99158,35 3,53

    158,41 2,62158,75 6,35158,88 2,62158,88 15,9159 3

    159 3,5159 4159 5159 6159 7

    159 9159,1 8,4159,2 5,7159,2 7159,3 5,7

    159,5 3159,5 6,99160 1,6160 2160 2,3

    160 2,5160 3160 3,5160 3,55160 4

    160 4,5160 5160 5,25160 5,3160 5,7

    160 6160 7160 7,2160 7,5160 7,7

    AbmessungenDimensionsd1 d2

    160 8160 9160 10160 12160 14

    160 16161 3161 3,5161 4161 5

    161,16 1,78161,3 5,33161,9 6,99162 2,3162 2,5

    162 3162 3,15162 3,5162 3,53162 4

    162 5162 6162 7162 8162 11

    162,5 4163 3163 3,5163 4163 5

    163 8163 9163,5 8163,6 2,2163,7 8,6

    164 2164 3164 3,5164 4164 5

    164 12164,1 8,4164,2 5,7164,3 5,7164,34 1,78

    AbmessungenDimensionsd1 d2

    168 3168 3,5168 4168 4,5168 5

    168 7168 12168 15168,3 5,7168,3 6,99

    168,3 15168,5 3168,5 6,25168,7 8,6169 2,4

    169 3169 3,5169 4169 5169 6

    169 15169,1 8,4169,2 5,7169,2 6,2169,3 5,7

    169,5 3170 1,78170 2170 2,4170 2,5

    170 2,62170 3170 3,5170 3,55170 4

    170 5170 5,3170 6170 7170 7,5

    170 8170 8,5170 10170 11170,3 4,7

    30

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    170,4 4170,69 1,78170,82 5,33170,82 6,99171 2,5

    171 3171 3,5171 4171 5171 7

    171 10171 11171,05 3,53171,13 2,62171,4 3,2

    172 2,5172 2,8172 3172 3,5172 4

    172 4,5172 5172 6172 6,3172 7

    172 8172,5 2,5173 3173 3,5173 4

    173 5173,5 5173,87 1,78174 2,5174 3

    174 3,5174 4174 5174 5,25174 5,33

    174,1 8,4174,2 5,7174,3 5,7174,5 3174,6 6,99

    AbmessungenDimensionsd1 d2

    182 4182 5182 6182 7182 8

    182,3 7183 3183 3,5183 4183 5

    183,5 5,7183,52 5,33183,52 6,99183,75 3,53183,83 2,62

    184 3184 3,5184 4184 5184 6

    184 7184 8184 15184,1 8,4184,15 6,35

    184,2 5,7184,3 5,7184,5 3185 2185 2,62

    185 3185 3,5185 3,55185 4185 4,5

    185 5185 5,3185 6185 7,5185 8

    185 10185,4 5,33186 3186 3,5186 4

    AbmessungenDimensionsd1 d2

    175 2175 2,5175 3175 3,5175 3,55

    175 4175 5175 5,3175 6175 7

    175 8175,5 3176 2,7176 3176 3,5

    176 3,6176 4176 5176 6176,2 7

    176,8 3,6177 1,5177 2,5177 2,62177 3

    177 3,5177 4177 5177 7177,17 5,33

    177,17 6,99177,4 3,53177,4 5,5177,47 2,62177,8 4,7

    177,8 4,76177,8 6,35177,8 6,6177,9 8178 2

    178 3178 3,5178 4178 4,5178 5

    AbmessungenDimensionsd1 d2

    178 8178 10178 12179 2,5179 3

    179 3,5179 4179 5179,1 8,4179,2 5,7

    179,3 5,7179,5 3179,5 5179,6 5,1179,6 5,4

    180 1,5180 2180 3180 3,5180 3,55

    180 4180 4,3180 4,5180 4,8180 5

    180 5,3180 5,4180 6180 7,5180 8

    180 9180 10180 12180 14180 15

    181 3181 3,5181 4181 5181 6,35

    181 6,99181,8 2,4182 2182 3182 3,5

    AbmessungenDimensionsd1 d2

    186 4,5186 5186 6186 7186,5 8,5

    187 3187 3,5187 4187 5187 6

    187 7187,3 6,99187,5 4187,62 2,62187,7 1,7

    187,74 3,53188 1,5188 2188 3188 3,5

    188 4188 5188 6188 12188 15

    188,7 10,8189 3189 3,5189 4189 4,5

    189 5189,1 8,4189,2 5,7189,3 5,7189,5 3

    189,5 4,5189,87 5,33189,87 6,99190 2190 2,6

    190 2,7190 3190 3,5190 3,55190 4

    31

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    190 4,5190 4,6190 5190 5,3190 5,5

    190 6190 6,3190 7190 8190 8,5

    190 10190,1 3,53190,18 2,62191 3191 3,5

    191 4191 5191 5,5191,1 6192 2

    192 2,5192 3192 3,5192 4192 4,5

    192 5192 8 192,22 6,99193 2193 2,62

    193 3193 3,5193 4193 5193 6

    193 8193,5 4193,5 4,8193,5 5193,5 5,33

    193,7 6,99194 2194 2,2194 3194 3,5

    AbmessungenDimensionsd1 d2

    202 4202 5202 5,5202 6202,57 5,33

    202,57 6,99202,79 3,53202,87 2,62203 1,78203 3

    203 3,5203 4203 5203 6203 6,35

    203 7203,2 3,2203,2 11203,5 4203,5 6

    204 3204 3,5204 4204 5204 6

    204 13204,1 8,4204,2 5,7204,5 3204,6 5,2

    205 1,5205 2205 3205 3,5205 3,6

    205 4205 5205 5,5205 6205 7

    205 7,5205 8205 20206 3206 3,5

    AbmessungenDimensionsd1 d2

    194 4194 5194 5,33194 7194,1 8,4

    194,2 5,7194,3 5,7195 3195 3,2195 3,5

    195 3,55195 4195 5195 5,3195 6

    195 7195 7,5195 8195 10195 11

    196 3196 3,3196 3,5196 4196 5

    196 6196 6,55196 7196,22 5,33196,22 6,99

    196,44 3,53196,53 2,62197 3197 3,5197 4

    197 4,5197 4,8197 5197 13198 3

    198 3,5198 3,8198 4198 5198 6

    AbmessungenDimensionsd1 d2

    198 7198 7,5198 8198 10198 17

    199 3199 3,5199 4199 5199 10

    199,1 8,4199,2 5,7199,3 3199,3 5,7199,5 3

    199,8 6,99200 2200 3200 3,5200 3,55

    200 4200 4,5200 5200 6200 6,3

    200 6,5200 7200 8200 10200 12

    200 14200 16200,7 6,99201 3201 3,5

    201 4201 5201 6201 7201 9

    201 10201,5 4,6202 3202 3,5202 3,6

    AbmessungenDimensionsd1 d2

    206 4206 5206 6,99206 7206 8

    206 10206 12207 3207 3,5207 4

    207 4,5207 5207 7,4207,5 5,5207,5 7,5

    208 3208 3,5208 4208 4,5208 5

    208 6208 7208 8208 9208,92 5,33

    208,92 6,99209 3209 3,5209 4209 5

    209 7209,1 8,4209,14 3,53209,2 5,7209,23 2,62

    209,3 5,7209,5 3210 2210 2,5210 3

    210 3,5210 4210 5210 5,15210 5,5

    32

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    210 6210 6,5210 7210 8210 9

    210 10210 11211 3211 3,5211 4

    211 5212 2,5212 3212 3,5212 4

    212 5212 6212 6,3212 6,5212 7

    212 8212 10212 12212,4 7,3213 2,4

    213 3213 3,5213 4213 5213 5,4

    213 7213 8,5214 2214 3214 3,5

    214 4214 5214 8214,3 5,7214,5 3

    214,9 8,1215 3215 3,5215 4215 4,5

    AbmessungenDimensionsd1 d2

    225 5,7225 6225 6,3225 7225 8

    226 3226 3,5226 4226 5226 6

    226 8227 3227 3,3227 3,5227 4

    219 4,5219 5219,1 8,4219,2 5,7219,3 5,7

    219,5 3219,5 5,33220 2220 3220 3,5

    220 4220 5220 6220 7220 7,5

    220 8220 10220 14221 3221 3,5

    221 4221 5221 6221,5 5,7221,62 5,33

    221,62 6,99221,84 3,53221,93 2,62222 3222 3,2

    AbmessungenDimensionsd1 d2

    215 5215 5,7215 6215 7215 8

    215 10215 20215,27 5,33215,27 6,99215,49 3,53

    215,58 2,62215,67 5,33215,9 6,35216 2216 3

    216 3,5216 4216 5216 6217 3

    217 3,5217 3,7217 4217 5217 5,2

    217 6217 8218 3218 3,5218 4

    218 4,5218 5218 5,8218 6218 7

    218 12218,5 4,5219 3219 3,5219 4

    219 4,5219 5219,1 8,4219,2 5,7219,3 5,7

    AbmessungenDimensionsd1 d2

    219,5 3219,5 5,33220 2220 3220 3,5

    220 4220 5220 6220 7220 7,5

    220 8220 10220 14221 3221 3,5

    221 4221 5221 6221,5 5,7221,62 5,33

    221,62 6,99221,84 3,53221,93 2,62222 3222 3,2

    222 3,5222 4222 5222 7222 18

    222,94 2,6223 7224 3224 3,2224 3,5

    224 3,8224 6,3224 7225 2,8225 3

    225 3,5225 4225 4,5225 5225 5,5

    AbmessungenDimensionsd1 d2

    222 3,5222 4222 5222 7222 18

    222,94 2,6223 7224 3224 3,2224 3,5

    224 3,8224 6,3224 7225 2,8225 3

    225 3,5225 4225 4,5225 5225 5,5

    225 5,7225 6225 6,3225 7225 8

    226 3226 3,5226 4226 5226 6

    226 8227 3227 3,3227 3,5227 4

    227 4,5227 5227 5,33227,4 2,62227,97 5,33

    227,97 6,9228 3228 3,5228 4228 5

    33

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    228 7228 8228 10228,19 3,53228,28 2,62

    228,47 7,66229 3229 3,5229 4229 4,3

    229 5229 6229 12229,1 8,4229,2 5,7

    229,3 5,7229,5 3230 2230 3230 3,5

    230 4230 5230 5,7230 6230 7

    230 7,5230 8230 9230 10230 15

    230 16230 20231 3231 3,5231 4

    231 5232 2,5232 3232 3,5232 4

    232 5233 3233 3,2233 3,5233 4

    AbmessungenDimensionsd1 d2

    243 5243 7243 8,5243,5 1,78243,5 6

    244 2244 3244 3,5244 4244 5

    244 6244 7245 2245 2,62245 3

    245 3,5245 4245 4,5245 5245 6,5

    245 10245 11245 12245,2 5,7246 2

    246 3246 3,5246 4246 5247 3

    247 3,5247 4247 5247 6247 6,99

    247 8,5247 14247,02 5,33247,24 3,53247,33 2,62

    248 3248 3,5248 4248 5248 14

    AbmessungenDimensionsd1 d2

    233 5233 7234 3234 3,5234 4

    234 5234,1 8,4234,3 5,7234,32 5,33234,32 6,99

    234,54 3,53234,63 2,62235 3235 3,5235 4

    235 5235 5,34235 6235 7235 8

    235 10235 15236 3236 3,5236 4

    236 5236 5,8236 6236 7236 14

    236,55 4,33237 3237 3,5237 4237 5

    237 6237 7237 7,5237,5 6238 2

    238 3238 3,5238 4238 5238 6

    AbmessungenDimensionsd1 d2

    238 7238 8239 3239 3,5239 4

    239 5239,1 8,4239,2 5,7239,3 5,7239,3 6,5

    239,5 3239,5 7,5240 2,5240 3240 3,5

    240 4240 5240 5,7240 6240 6,5

    240 7240 7,7240 8240 12240,1 3,9

    240,67 5,33240,67 6,99240,89 3,53240,98 2,62241 3

    241 3,5241 4241 5241 6,4242 3

    242 3,5242 4242 5242 6242 7

    242 8242 8,5243 3243 3,5243 4

    AbmessungenDimensionsd1 d2

    249 3249 3,5249 4249 6249 7,2

    249 15249,1 8,4249,2 5,7249,3 5,7249,5 3

    250 2,5250 3250 3,5250 4250 4,5

    250 4,6250 5250 5,33250 6250 7

    250 8250 10250 18250,5 5,8251 3

    251 3,5251 4251 5251 7251,14 6,99

    252 3,5252 4252 5252,8 3,6253 3,5

    253 4253 5253 7253 8253 12

    253,57 5,33253,57 6,99253,59 1,78253,59 3,53253,77 7

    34

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    254 3254 3,5254 4254 5254 19

    254,5 3254,6 7,9255 2255 3255 3,5

    255 4255 4,2255 5255 5,6255 5,7

    255 7256 2,5256 3,5256 4256 5

    256 7,2256,5 8,5257 3257 3,5257 4

    257 5258 3,5258 4258 5258 6

    258 7258 8258 12259 3,5259 4

    259 5259 6259,2 5,7259,24 3,5259,3 5,7

    259,5 5259,7 6,9260 2,5260 3260 3,5

    AbmessungenDimensionsd1 d2

    271 3271 3,5271 4271 5271 5,33

    272 2,5272 4272 5272 7272,4 6,99

    272,64 3,53273 3,5273 4273 4,5273 5

    274 2274 3274 3,5274 4274 5

    274 6,5274 8,6274,5 4275 2,5275 3

    275 3,5275 4275 5275 7,5275 8

    275 16275,6 3,53275,8 8276 2276 3,5

    276 4276 5276 5,34276 7276 8

    277 3,5277 4277 5277 9278 3,15

    AbmessungenDimensionsd1 d2

    260 3,53260 4260 5260 6260 6,5

    260 7260 8260 10260 11261 3,5

    261 4261 5261 5,33261,5 6,4261,5 8

    262 2262 3262 3,5262 4262 5

    262 6262 8262 12262 14262,34 3,53

    263 3,5263 4263 5263 10264 1,78

    264 3264 3,5264 4264 5264 18

    264,1 8,4265 2265 3265 3,5265 4

    265 4,4265 5265 6265 6,5265 7

    AbmessungenDimensionsd1 d2

    265 8265 9265 10266 3,5266 4

    266 5266 6266 7266,07 5,33266,07 6,99

    266,3 3,53266,7 6,35267 2,7267 3,5267 4

    267 4,5267 5267 14267,5 5,5268 3,5

    268 4268 5268 7268 8269 2,5

    269 3269 3,5269 4269 5269 6

    269,2 5,7269,3 5,7269,5 6269,7 6,35270 2,5

    270 3270 3,5270 4270 5270 5,34

    270 6270 7270 8270 10270,7 4,3

    AbmessungenDimensionsd1 d2

    278 3,2278 3,3278 3,5278 4278 5

    278 6278 8278 12278,77 5,33278,77 6,99

    279 3,53279 4279 5279 7279,1 8,4

    279,2 5,7279,3 2,62279,3 5,7280 2,5280 3

    280 3,5280 4280 4,5280 5280 6

    280 6,3280 7280 8280 9280 10

    281 3,5281 4281 5282 3,5282 4

    282 5283 3,5283 4283 5284 3,5

    284 4284 5284 6284 9284 10

    35

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    284,2 5,7284,5 2,62284,5 4285 3285 3,5

    285 4285 5285 5,33285 6285 7

    285 14285 15285 16285 17285,1 6,99

    285,75 7,94286 3,5286 4286 5286 6,2

    286 7286,6 7,8287 3,5287 4287 5

    288 3,5288 3,53288 4288 5288 6

    289 3,5289 4289 5289,2 5,7289,3 5,7

    290 2290 2,5290 3290 3,5290 4

    290 5290 5,34290 6290 7290 8

    AbmessungenDimensionsd1 d2

    305 3305 3,5305 4305 4,5305 5

    305 6305 7305 15305 17305,8 9,5

    306 3,5306 4306 5307 3,5307 4

    307 5307 7307,57 3,53308 3,5308 4

    308 5308 6308 8308 9308,86 5,33

    309 3,5309 4309 5310 2,5310 3

    310 3,5310 4310 5310 6310 6,6

    310 6,9310 7310 8310 10310 12

    310,5 6,99311 3,5311 4311 5311 6

    AbmessungenDimensionsd1 d2

    290 10291 3291 3,5291 4291 5

    291,47 5,33291,47 6,99291,7 3,53292 3,5292 4

    292 5292 7292 10292,1 4,76293 3,5

    293 4293 5294 2,7294 3,5294 4

    294 5294 6295 3,5295 4295 5

    295 6295 7295 10295 20296 2,5

    296 3,5296 4296 5296 5,33296 6

    297 3,5297 4297 5297 7297 8,8

    297,8 6,99298 3,5298 4298 5298 7

    AbmessungenDimensionsd1 d2

    298 10299 3,5299 4299 5299,2 5,7

    299,3 5,7300 2300 3300 3,5300 4

    300 5300 6300 6,5300 7300 7,5

    300 8300 9300 10300 12,5300 15

    301 1,78301 3,5301 4301 5301 6

    302 3,53302 4302 4,3302 5303 3,5

    303 4303 5303 6303 8304 2

    304 3304 3,5304 4304 5304 8

    304 8,4304,1 5,7304,17 5,33304,17 6,99304,39 3,53

    AbmessungenDimensionsd1 d2

    312 3,5312 4312 5312 6,3312 18

    313 3,5313 4313 5313 10314 3

    314 3,5314 4314 5314 6314 12

    314 16315 2,5315 3315 3,5315 4

    315 4,5315 5315 5,33315 6315 7

    315 10315 20315,6 6,99316 3,5316 4

    316 5316 7316 9316,87 6,99317 3,5

    317 4317 5317 7317 9317,5 3,2

    318 3,5318 4318 5319 3,5319 4

    36

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    319 5319 5,7319 7319 8,4319 10

    319,2 3,53319,2 5,7319,3 5,7320 2,5320 3

    320 3,5320 4320 5320 5,5320 6

    320 6,5320 7320 8320 10321 3,4

    321 3,5321 4321 5321 5,33322 3,5

    322 4322 5322 9323 3,5323 4

    323 5323,2 6,99324 3,5324 4324 5

    324 5,34324 6324 7324 8324 17

    325 3325 3,5325 3,52325 4325 5

    AbmessungenDimensionsd1 d2

    340 8,6340 10340 12341 3,5341 4

    341 5342 3,2342 3,5342 4342 5

    342 7342 8342,27 6,99342,9 5,34343 3,5

    343 4343 5343 7343 10344 1,6

    344 2,5344 3,5344 4344 5344 8,4

    345 2345 3345 3,15345 3,5345 4

    345 5345 5,34345 6345 7345 10

    346 3346 3,5346 4346 5346 9,5

    347 3,5347 4347 5347 9348 3,5

    AbmessungenDimensionsd1 d2

    325 6325 7325 8325 9325 10

    326 3,5326 4326 5327 3,5327 4

    327 5328 2,5328 3,5328 4328 5

    328 6328 12328,5 6328,6 8329 3,5

    329 4329 5329,2 5,7329,57 5,33329,57 6,99

    329,8 3,53330 3330 3,5330 4330 5

    330 5,7330 6330 6,5330 7330 8

    330 10330 14330,2 6,35331 3331 3,5

    331 3,53331 4331 5331 6332 3,5

    AbmessungenDimensionsd1 d2

    332 4332 5332,22 9,5333 3,5333 4

    333 5333 6333,4 8,6334 3,5334 4

    334 5334,7 8,6335 3335 3,5335 4

    335 5335 6335 7335 8335 9,2

    335,9 6,99336 3,5336 4336 5336,55 4,33

    336,6 3,18337 3,5337 4337 5338 3,5

    338 4338 5338 6339 3,5339 4

    339 5339 8,4339,2 5,7339,3 5,7340 3,5

    340 4340 5340 6340 7340 8

    AbmessungenDimensionsd1 d2

    348 4348 5348 6348 8348 11

    349 2,5349 3,5349 4349 5349,2 5,7

    350 2350 2,5350 3350 3,5350 4

    350 5350 6350 6,5350 8350 10

    350 12350 14350 15351 3,5351 4

    351 5351 7352 3352 3,5352 4

    352 5353 3,5353 4353 5353,37 3,53

    354 3354 3,5354 4354 5354,97 5,33

    354,97 6,99355 3355 3,5355 4355 4,5

    37

    http://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editorhttp://tracker-software.com/product/pdf-xchange-editor

  • AbmessungenDimensionsd1 d2

    355 5355 6355 6,5355 7355 7,5

    355 12355,2 3,53356 3,5356 4356 5

    357 3,5357 4357 5358 3,5358 4