NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate...

41
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !! ! ! ! ! ! ! ! ! ! ! ! ! ! !! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 7 1 9 2 4 5 3 8 6 10 11 : 0 80 40 Miles NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and Portland Cement Concrete Release Date: 3/2/2020 * Map extent does not include all currently approved out-of-state aggregate sources for NYSDOT. Consult the tabular List of Approved Aggregate Sources for a complete listing of currently approved sources. Basemaps from USGS, National Geographic, and ESRI. For descriptions of the geologic map symbols, visit https://pubs.usgs.gov/ds/424/ Garrity, C.P., and Soller, D.R., 2009, Database of the Geologic Map of North America; adapted from the map by J.C. Reed, Jr. and others (2005): U.S. Geological Survey Data Series 424 National Geographic, Esri, Garmin, HERE, UNEP-WCMC, USGS, NASA, ESA, METI, NRCAN, GEBCO, NOAA, increment P Corp. tpf The online interactive Materials Supplier Map Viewer is updated daily and is the definitive source of Aggregate Source Approval Status.

Transcript of NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate...

Page 1: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

!!

!

!!

!!

!

!

!

!

!

!

!

!

!

!!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!!

!

!

!

!

!

!

!!

!

!

!

!

!

!!

!

!

!

!

!

!

!!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!!

!

!

!

!

!

!

!!

!

!

!!

!

!

!

!

!

!

!

!

!

! !!!!!

!! !

!!

!

!

!

!!

!

!

!

!

!

!

!

!

!!

!!

!

!!

!

!!!

!

!!!

!

!

!

!

!!

!!!

!

!

!!

!

!! !

!

!

!!

!

!

!

!

!

!

!

!

!

!!!

!!

!!

!

!

!! !!!

! !!! !

!!!

!!

!!

!

!

!!!

!!

!!

!

!! !! !!

! !!! !

!

!

!!

!!!

!

!

! !

!!

!

!!!

!

!

!

!

!!

!

!

!!!!

!

!!

!!

!

!

!!!

!

!

!

!

!

!!

!

!! !

!!

!!

!

!

!

!!!!

!

!! !!

!!!

!!!

!!

!!!

!!

!

!!!

!

!

!!

!!

!

!

!

!

!

!

!

!

!

!

!

!!

!

!

!

!

!

!

!

!!

!

!

!

!

!

!!!

!!!

!

!

!

!

!

!

!!

!

!!

!

!

!

!

!

!!

!

!

!

!

!

!

!!

!!

!

!

!!!

!

!

!

!

!!

!

!

!

!!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!!

!

!!

!!

!

!!!

!

! !

!

!

!

!!

!!

!

!

!

!

!

!

!

! !

!!

!

!

!

!

!

!

!

!

!!!

!

!

!

!

!

!

!!!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

! !

!

!!!!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

! !

!

!!

!!

!!!

!

!

!!

!

!

!

!!!!

!!

!

!!

!

! !

!!!

!!

!

!

!!

!

!!

!

!!!

7

1

9

2

4

5

3

8

6

1011

:0 8040

Miles

NYSDOT Approved Aggregate Sources*for Hot Mix Asphalt and Portland Cement Concrete

Release Date: 3/2/2020

* Map extent does not include all currently approvedout-of-state aggregate sources for NYSDOT.Consult the tabular List of Approved Aggregate Sourcesfor a complete listing of currently approved sources.

Basemaps from USGS, National Geographic, and ESRI.

For descriptions of the geologic map symbols,visit https://pubs.usgs.gov/ds/424/

Garrity, C.P., and Soller, D.R., 2009,Database of the Geologic Map of North America;adapted from the map by J.C. Reed, Jr. and others(2005): U.S. Geological Survey Data Series 424National Geographic, Esri, Garmin, HERE,UNEP-WCMC, USGS, NASA, ESA, METI,NRCAN, GEBCO, NOAA, increment P Corp.

tpf

The online interactive Materials SupplierMap Viewer is updated daily and is thedefinitive source of Aggregate Source

Approval Status.

Page 2: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

Department-assigned aggregate source number

(NYSDOT Region #) - (Location #) followed by aggregate type/category (see below):

F = Fine aggregate (natural sand-sized deposit).

FM = Fines manufactured as a by-product of crushing one of the aggregate types below.

G = Gravel.

L = Lightweight aggregate.

R = Rock (aka bedrock, stone, or ledgerock).

RS = Rock (select). Selectively quarried rock.

S = Slag.Current Biennial Test Number

Department test number. The letter "C" after the test number denotes crushed gravel; "S" denotes selective quarrying.

Non-Carbonates - Suitable for pavement friction-demand applications.

Anything other than Limestone, Dolomite, or Marble.

Carbonates - Consult project documents for pavement friction-demand applications.

All Limestones, Dolomites, and Marbles.

Gravels (Multiple lithologies) - Consult project documents for pavement friction-demand applications.

Crushed Gravel - For use in pavement or concrete, NYSDOT requires a minimum percentage of crushed particles having broken, angular faces.

For #2 size, minimum 75% of the particles (by weight) must be crushed.

For #1 size, minimum 85% of the particles (by weight) must be crushed.Screened Gravel is inadequately crushed (generally round) gravel and is not acceptable for use in Portland cement concrete or bituminous concrete on NYSDOT projects.

% Non-Carbonate (Gravel)

Percent Non-Carbonate particles (by weight) in gravel.

AIR Acid Insoluble Residue. The percent (by weight) of an aggregate sample not dissolved in hydrochloric acid.

Bulk SSD: Specific gravity measured under water saturated, surface dry conditions.

Bulk Dry: Specific gravity measured under completely dried conditions.

Apparent: Specific gravity not including the volume or mass of any void spaces within the aggregate particles.

Absorption (%) Amount of water that can be absorbed by the aggregate.

Ballast Rating Railroad ballast classification. Based on American Railway Engineering Maintenance-of-Way Association specifications.

List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

Alkali-Silica Reactivity Potential. Aggregates designated as such are restricted from use in Portland cement concrete with cement having an alkali content in excess of 0.70%, unless a portion of the cement is replaced by approved pozzolan.

New York State Department of Transportation

Legend

Primary Lithology of Coarse Aggregates

Office of Technical Services - Materials Bureau

NYSDOT Aggregate Source Number

Aggregate Size Type/Category

Specific Gravities

ASR Potential

Legend

Page 3: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

F = Fine aggregate. Any natural deposit of unconsolidated sand.GFM = Gravel fines, manufactured. Any natural deposit of gravel that is crushed into sand sized particles.LFM = Lightweight fines, manufactured. Lightweight aggregate (such as expanded shale) crushed into sand sized particles.RFM = Rock fines, manufactured. Quarried bedrock/ledgerock crushed into sand sized particles. RSFM = Rock (select) fines, manufactured. Selectively quarried rock crushed into sand sized particles.G = Gravel. Any natural deposit of unconsolidated gravel.L = Lightweight aggregate. Typically a thermally expanded shale that is vitrified and has high porosity and low specific gravity.R = Rock (also known as bedrock, stone, or ledgerock).

RS = Rock (select). Selectively quarried rock, to include or exclude a specific different lithology that is present at the source. Used when a bedrock quarry contains multiple rock units that have different qualities or end-use restrictions.

S = Slag. By-product of metal smelting.Example A: 01-001GFM: Region 1 source, number 001, fine aggregate (sand sized) manufactured as a by-product from gravel crushing operations.Example B: 06-940RS: Region 6 source, number 940, selectively quarried bedrock which is a specific lithology. An example is a sandy limestone (high in silica) which is distinct from an adjacent layer of pure limestone. Department test number. The letter "C" after the test number denotes crushed gravel; "S" after the test number denotes selective quarrying operation.Example A: 18AR 001S = 2018 (Year Sampled) AR (Aggregate, Rock) test number 001. Selectively quarried.Example B: 18AG 999C = 2018 (Year Sampled) AG (Aggregate, Gravel) test number 999. Crushed gravel.Example C: 18AF 001 = 2018 (Year Sampled) AF (Aggregate, Fine) test number 001.Non-Carbonates tend to resist polishing and are typically suitable for pavement friction-demand applications.Any primary lithology that does not include Limestone, Dolomite, or Marble can be considered a Non-Carbonate lithology.Common Non-Carbonates include sandstone, traprock, and granite.Carbonates tend to polish at a faster rate than non-carbonates. Depending on the amount of acid insoluble residue and degree of alteration from calcium-rich to magnesium rich, carbonate rocks may or may not be suitable for pavement friction-demand applications. Consult project documents for pavement friction-demand applications.All Limestones, Dolomites, and Marbles are considered Carbonate lithologies.Note: Carbonate sources having Acid Insoluble Residue in excess of 20% will include notation in the source listing to designate them as High A.I.R rock to assist in aggregate selection for friction-demand applications.Gravels (Multiple lithologies in unconsolidated deposits)Consult project documents for pavement friction-demand applications.Crushed Gravel - The percent of non-carbonate particles determines a gravel source's suitability for pavement friction-demand applications.For use in pavement or concrete, NYSDOT requires a minimum percentage of crushed particles having broken, angular faces. For #2 sized coarse aggregate (generally between ½ inch and 1 inch), a minimum of 75% of the particles must be crushed.For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be crushed.Screened Gravel is the term used to denote uncrushed or inadequately crushed (generally round) gravel and is not acceptable for use in Portland cement concrete or bituminous concrete on NYSDOT projects.

% Non-Carbonate (Gravel)

% Non-Carbonate material in gravel. These values are determined from visual petrographic analysis and used for friction-provision determinations on gravel coarse aggregate. Conservative values from each aggregate source's testing history are shown.

AIR Acid Insoluble Residue is the portion of an aggregate sample not dissolved in hydrochloric acid. Used for friction-provision determinations on carbonate bedrock coarse aggregate, and all fine aggregate.

Values shown in the NYSDOT List of Approved Aggregate Sources are from biennial samples tested in the NYSDOT Central Laboratories. When designing mixes, use specific gravities representative of current aggregate production.

Bulk SSD: Specific gravity measured under water saturated, surface dry conditions. Includes the volume and the mass of any water-filled voids. Used in Portland cement concrete mix design.Bulk Dry: Specific gravity measured under completely dried conditions. Includes the volume but not the mass of any void spaces within the aggregate particles. Used in hot mix asphalt (HMA) formula design.Apparent: Specific gravity not including the volume or mass of any void spaces within the aggregate particles. Used in bituminous concrete (asphalt) mix design.For certain aggregates, the specific gravities can be highly variable and must be monitored frequently for proper mix design adjustments to ensure performance.

Absorption (%) Measure of the amount of water that can be absorbed by the aggregate. Used in determining appropriate water/cement ratios in Portland cement concrete and asphalt binder calculations.Ballast Rating Railroad ballast classification. Based on American Railway Engineering Maintenance-of-Way Association specifications.

The ASR potential is based on petrographic determinations on the amount of chert in non-carbonate rocks or the percent insoluble residue in carbonate rocks.

Static Stockpile OnlyThis designation indicates only a specific stockpile of aggregate is approved for use in NYSDOT projects based on test results and individual pile acceptance. Static stockpiles are numbered and photographed and approval expires upon depletion. Producers must report stockpile depletion and end-use application to the NYSDOT Regional Materials Engineer and seek new approvals on new stockpiles.

Redundant Restrictions

End-use retsrictions are assigned based on test results and/or processing operations and may be added or removed as appropriate. This is why some apparently redundant restrictions are shown, such as "Not for Portland Cement Concrete" (for soundness test results) along with "Screened Gravel Only" which implies Not for Portland Cement Concrete. If processing operations change to meet crushing requirements, then the Screened Gravel Only restriction could be removed but the "Not for Concrete" restriction would remain. Likewise for ASR. The ASR restriction is based on petrographics, while the Not for Concrete restriction is based on soundness testing.

ASR Potential

New York State Department of Transportation - Office of Technical Services - Materials Bureau - Engineering GeologyList of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

X: This aggregate has been determined to have a potential for alkali-silica reaction and is restricted from use in Portland cement concrete with cement having an alkali content in excess of 0.70%, unless a portion of the cement is replaced by approved pozzolan. For identification of cement regarding alkali content, see BR-280 "Cement Shipment Certification" or contact the Materials Bureau.

Descriptions and Examples

Aggregate Source Naming Convention

Current Biennial Test Number

Primary Lithology of Coarse Aggregates

Specific Gravities

Descriptions

Page 4: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 00

Lightweight 1-1L AlbanyNorlite, LLCCohoes, NY

Lightweight - 18AL 1703-10, Lightweight Aggregate. Specific

gravities vary.42.7546 -73.7075

Region 00

Lightweight 1-1LFM AlbanyNorlite, LLCCohoes, NY

- - 19AFL1 -703-10, Lightweight Aggregate. Fine

aggregate produced from 1-1L. Specific gravities vary.

42.7546 -73.7075

Region 00

Slag 3-1S CayugaTMS International

Auburn, NY (Nucor Steel)Slag - 18AS 1 3.204 3.110 3.432 3.0 Approved for bituminous concrete only; 703-0204, Crushed Slag. 42.9553 -76.5721

Region 00

Lightweight 8-2L UlsterNortheast Solite Corp.

Mount Marion, NYLightweight - 19AL001

703-10, Lightweight Aggregate. Specific gravities vary.

42.0445 -73.9719

Region 00

Lightweight 8-2LFM UlsterNortheast Solite Corp.

Mount Marion, NY- - 19AFL002 -

703-10, Lightweight Aggregate. Fine aggregate produced from 8-2L. Specific

gravities vary.42.0445 -73.9719

Page 1 of 38 3/2/2020

Page 5: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 01

Crushed Bedrock

1-2RS1 AlbanyCallanan Industries Inc.South Bethlehem, NY

Limestone - 13AR 86S 2.699 2.683 2.727 0.6 Not for Portland Cement Concrete; High A.I.R. limestone. 42.5212 -73.8555

Region 01

Crushed Bedrock

1-2RS2 AlbanyCallanan Industries, Inc.

South Bethlehem, NYLimestone - 19AR012S 2.701 2.682 2.735 0.7 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.5212 -73.8555

Region 01

Crushed Bedrock

1-3R EssexMitchell Stone Products LLC

Tahawus, NYGranite - 19AR092 3.251 3.218 3.329 1.0 NY3 Specific gravities vary. 44.0497 -74.0526

Region 01

Crushed Bedrock

1-7R RensselaerCallanan Industries Inc.

Cropseyville, NYQuartzite - 18AR 33 2.697 2.684 2.719 0.5 NY2 42.7678 -73.5283

Region 01

Crushed Bedrock

1-8R SaratogaPallette Stone Corp.Saratoga Springs, NY

Dolomite & Limestone

- 19AR049 2.773 2.760 2.795 0.4 NY4 43.0768 -73.8371

Region 01

Crushed Bedrock

1-10R WashingtonPeckham Materials Corp.

Hudson Falls, NYLimestone & Dolomite

- 19AR004 2.803 2.794 2.819 0.3 NY4 XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;43.3502 -73.5707

Region 01

Crushed Bedrock

1-11R WarrenPeckham Materials Corp.

Chestertown, NYGranite - 19AR008 2.738 2.727 2.756 0.4 43.6237 -73.8062

Region 01

Crushed Bedrock

1-23R AlbanyCarver Sand & Gravel, LLC

Ravena, NYLimestone - 19AR087 2.660 2.645 2.684 0.6 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.4911 -73.8294

Region 01

Crushed Bedrock

1-24R Out of StatePike Industries, Inc.

New Haven, VTLimestone & Dolomite

- 19AR108 2.723 2.707 2.749 0.6 NY4 44.0948 -73.1836

Region 01

Crushed Bedrock

1-26R SaratogaPompa Brothers Inc.Saratoga Springs, NY

Limestone & Dolomite

- 19AR050 2.773 2.763 2.791 0.4 NY4 43.0779 -73.8452

Region 01

Crushed Bedrock

1-28R EssexUpstone Materials, Inc.

Saranac Lake, NYGranite - 19AR041 2.850 2.841 2.867 0.3 NY4 44.3659 -74.1141

Region 01

Crushed Bedrock

1-30R GreenePeckham Materials Corp.

Catskill, NY (Route 9W Quarry)Limestone - 19AR069 2.669 2.656 2.691 0.5 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.1784 -73.9148

Region 01

Crushed Bedrock

1-30RS GreenePeckham Materials Corp.

Catskill, NY (Route 9W Quarry)Limestone - 19AR070S 2.697 2.691 2.706 0.2 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.1784 -73.9148

Region 01

Crushed Bedrock

1-39R SaratogaPeckham Materials Corp.

Greenfield, NYGranite - 17AR 33 2.759 2.747 2.779 0.4 NY1 43.1296 -73.9312

Region 01

Crushed Bedrock

1-42R RensselaerWilliam E. Dailey, Inc.

Hoosick, NYLimestone & Dolomite

- 18AR 4 2.710 2.694 2.737 0.6 NY2 42.8880 -73.2786

Region 01

Crushed Bedrock

1-43R WashingtonPeckham Materials Corp.

Easton, NY (Easton Quarry)Dolomite & Limestone

- 18AR 50 2.766 2.745 2.804 0.8 NY4 43.0657 -73.5315

Region 01

Crushed Bedrock

1-44R EssexUpstone Materials, Inc.

Lewis, NY (Oak Hill Quarry)Granite - 19AR054 2.989 2.980 3.007 0.3 NY4 Specific gravities vary. 44.3057 -73.5846

Region 01

Crushed Bedrock

1-48R RensselaerR.J. Valente

Cropseyville, NY (Grafton Quarry)Quartzite - 18AR 32 2.704 2.689 2.731 0.6 NY2 42.7639 -73.5210

Region 01

Crushed Bedrock

1-49R GreeneCarver Sand & Gravel LLC

Ashland, NYGraywacke - 19AR083 2.653 2.631 2.689 0.8 42.3002 -74.3349

Region 01

Crushed Bedrock

1-52R WashingtonJointa Galusha, LLC

Hartford, NY (Smiths Basin Mine)Limestone & Dolomite

- 19AR093 2.851 2.836 2.879 0.5 NY2 XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;43.3773 -73.4720

Region 01

Crushed Bedrock

1-56R SaratogaPompa Brothers Inc.

Greenfield, NYGranite - 18AR 31 2.710 2.696 2.733 0.5 NY4 43.1251 -73.9364

Region 01

Crushed Bedrock

1-57R Out of StateGray Rock Quarry, LLC

Milton, VTDolomite - 19AR085 2.801 2.785 2.829 0.6 NY2 44.6250 -73.1585

Region 01

Crushed Bedrock

1-61R WashingtonAzzil Granite Materials, LLC

Whitehall, NYGranite - 18AR 64 2.777 2.762 2.804 0.6 NY4 43.4815 -73.4375

Region 01

Crushed Bedrock

7-15R Out of StatePike Industries Inc.

Swanton, VTLimestone - 19AR006 2.739 2.730 2.755 0.3 NY2 Assigned to Region 1. 44.9115 -73.1202

Page 2 of 38 3/2/2020

Page 6: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 01

Crushed Gravel

1-3G RensselaerTroy Sand & Gravel Co., Inc.

Stephentown, NY (Tayer Road (Boyle) Bank)

- 100 17AG 58C 2.673 2.644 2.721 1.1 - 42.5090 -73.4934

Region 01

Screened Gravel

1-9G SchenectadyCranesville Aggregates Co., Inc.

Scotia, NY (Plant 5, Village of Scotia)- 70 14AG 13C 2.614 2.577 2.675 1.4 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

42.8450 -73.9837

Region 01

Screened Gravel

1-68G Out of StatePike Industries Inc.

Middlebury, VT- 85 18AG 28 2.612 2.585 2.656 1.0 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

44.0519 -73.0913

Region 01

Screened Gravel

1-73G SchenectadyCranesville Aggregates Co., Inc.

Scotia, NY (Van Buren Bank, T. of Glenville)- 75 12AG 21C 2.620 2.591 2.678 1.3 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

42.8554 -74.0199

Region 01

Crushed Gravel

1-75G SaratogaPompa Brothers IncChatfield Corner, NY

- 95 18AG 25C 2.684 2.663 2.719 0.8 - 43.1147 -73.9322

Region 01

Crushed Gravel

1-81G Out of StateJ.P. Carrara & Sons, Inc.

Middlebury, VT- 85 17AG 27C 2.605 2.581 2.644 0.9 - 44.0061 -73.0949

Region 01

Crushed Gravel

1-85G WashingtonPeckham Materials Corp.

West Fort Ann, NY (Finch-Pruyn Bank)- 70 18AG 42C 2.665 2.639 2.709 1.0 - 43.3946 -73.6095

Region 01

Crushed Gravel

1-90G SaratogaPeckham Materials Corp.

Chatfield Corner, NY- 95 19AG055C 2.798 2.781 2.828 0.6 - 43.1212 -73.9292

Region 01

Crushed Gravel

1-97G WashingtonJointa Galusha, LLCPattens Mills, NY

- 65 19AG048 2.618 2.608 2.634 0.4 - Check % crushed prior to intended use. 43.3945 -73.6032

Region 01

Crushed Gravel

1-104G WarrenFort Miller Aggregates

Glens Falls, NY (Dream Lake Pit)- 70 19AG041 2.663 2.637 2.708 1.0 - 43.3841 -73.6358

Region 01

Crushed Gravel

1-120G EssexPeckham Materials Corp.

Ticonderoga, NY- 50 18AG 41C 2.684 2.661 2.725 0.9 - 43.9040 -73.4372

Region 01

Crushed Gravel

1-121G Out of StateWilliam E. Dailey, Inc.South Shaftsbury, VT

- 25 18AG 43C 2.630 2.551 2.769 3.1 - 42.9646 -73.1950

Region 01

Crushed Gravel

1-130G Out of StatePike Industries Inc.

Danby, VT- 60 17AG 26C 2.700 2.678 2.738 0.8 - 43.3908 -73.0019

Region 01

Screened Gravel

1-138G WashingtonCharles Friedman Excavating, Inc.

Fort Ann, NY- 75 18AG 21 2.697 2.667 2.750 1.1 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

43.4897 -73.4914

Region 01

Crushed Gravel

1-142G EssexPat Armstrong Inc.

Ticonderoga, NY- 50 19AG040C 2.716 2.698 2.748 0.7 - 43.8971 -73.4464

Region 01

Crushed Gravel

1-143G SaratogaTroy Sand & Gravel Co., Inc.

Providence, NY- 90 19AG056C 2.688 2.671 2.717 0.6 - 43.0897 -74.0105

Region 01

Crushed Gravel

1-145G1 Out of StateBerkshire Concrete Corp.

Hinsdale, MA- 75 17AG 42C 2.675 2.654 2.712 0.8 - 42.4383 -73.1155

Page 3 of 38 3/2/2020

Page 7: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 01

Natural Sand 1-3F RensselaerTroy Sand & Gravel Co., Inc.

Stephentown, NY (Tayer Road (Boyle) Bank)

- - 19AF147 2.650 2.623 2.696 1.0 - 42.5090 -73.4934

Region 01

Manufactured Sand

1-3RFM EssexMitchell Stone Products LLC

Tahawus, NY- - 19AF146 3.209 3.200 3.231 0.3 - Fine aggregate produced from 1-3R. 44.0497 -74.0526

Region 01

Natural Sand 1-5F SaratogaCranesville Aggregates Co., Inc.

Moreau, NY (South Glens Falls Plant)- - 17AF 38 2.685 2.666 2.719 0.7 - 43.2235 -73.7006

Region 01

Manufactured Sand

1-8RFM SaratogaPallette Stone Corp.Saratoga Springs, NY

- - 19AF061 2.735 2.707 2.785 1.0 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 1-8R. 43.0768 -73.8371

Region 01

Natural Sand 1-9F SchenectadyCranesville Aggregates Co., Inc.

Scotia, NY (Plant 5, Village of Scotia)- - 18AF115 2.615 2.583 2.669 1.3 - 42.8450 -73.9837

Region 01

Manufactured Sand

1-10RFM WashingtonPeckham Materials Corp.

Hudson Falls, NY- - 19AF007 1.890 1.881 1.902 0.5 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 1-10R. 43.3502 -73.5707

Region 01

Natural Sand 1-11F WarrenPeckham Materials Corp.

Chestertown, NY- - 19AF013 2.661 2.629 2.716 1.2 - Not for Portland Cement Concrete; 43.6248 -73.8040

Region 01

Manufactured Sand

1-11RFM WarrenPeckham Materials Corp.

Chestertown, NY- - 19AF014 2.729 2.723 2.740 0.2 - Fine aggregate produced from 1-11R. 43.6237 -73.8062

Region 01

Natural Sand 1-14F RensselaerTroy Sand & Gravel Co., Inc.

Schaghticoke, NY (Hemstreet Park Bank)- - 19AF103 2.660 2.627 2.715 1.2 - 42.8815 -73.6653

Region 01

Manufactured Sand

1-23RFM AlbanyCarver Sand & Gravel, LLC

Ravena, NY- - 19AF009 2.608 2.537 2.731 2.8 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 1-23R. 42.4911 -73.8294

Region 01

Manufactured Sand

1-24RFM Out of StatePike Industries, Inc.

New Haven, VT- - 19AF170 2.688 2.670 2.719 0.7 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 1-24R. 44.0948 -73.1836

Region 01

Manufactured Sand

1-26RFM SaratogaPompa Brothers Inc.Saratoga Springs, NY

- - 18AF 43 2.756 2.738 2.789 0.7 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 1-26R. 43.0779 -73.8452

Region 01

Manufactured Sand

1-28RFM EssexUpstone Materials, Inc.

Saranac Lake, NY- - 18AF 24 2.921 2.913 2.935 0.3 - Fine aggregate produced from 1-28R. 44.3659 -74.1141

Region 01

Natural Sand 1-29F RensselaerTroy Sand & Gravel Co., Inc

West Sand Lake, NY- - 19AF169 2.621 2.570 2.707 2.0 - 42.6495 -73.6031

Region 01

Manufactured Sand

1-30RFM GreenePeckham Materials Corp.

Catskill, NY (Route 9W Quarry)- - 19AF094 2.665 2.638 2.712 1.0 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 1-30R. 42.1784 -73.9148

Region 01

Manufactured Sand

1-30RSFM GreenePeckham Materials Corp.

Catskill, NY (Route 9W Quarry)- - 19AF095 2.681 2.664 2.710 0.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 1-30RS. 42.1784 -73.9148

Region 01

Manufactured Sand

1-38RFM RensselaerTroy Sand & Gravel Co., Inc.

West Sand Lake, NY- - 19AF174 2.714 2.680 2.776 1.3 - Fine aggregate produced from 1-38R. 42.6532 -73.6038

Region 01

Manufactured Sand

1-39RFM SaratogaPeckham Materials Corp.

Greenfield, NY- - 18AF 48 2.744 2.732 2.766 0.4 - Fine aggregate produced from 1-39R. 43.1296 -73.9312

Region 01

Manufactured Sand

1-42RFM RensselaerWilliam E. Dailey Inc.

Hoosick, NY- - 18AF 7 2.786 2.765 2.823 0.8 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 1-42R. 42.8880 -73.2786

Region 01

Manufactured Sand

1-44RFM EssexUpstone Materials, Inc.

Lewis, NY (Oak Hill Quarry)- - 18AF 76 3.109 3.103 3.124 0.2 - Fine aggregate produced from 1-44R. 44.3057 -73.5846

Region 01

Manufactured Sand

1-52RFM WashingtonJointa Galusha, LLC

Hartford, NY (Smiths Basin Mine)- - 19AF148 2.750 2.744 2.762 0.2 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 1-52R. 43.3773 -73.4720

Region 01

Manufactured Sand

1-57RFM Out of StateGray Rock Quarry, LLC

Milton, VT- - 19AF130 2.782 2.771 2.803 0.4 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 1-57R. 44.6250 -73.1585

Region 01

Manufactured Sand

1-61RFM WashingtonAzzil Granite Materials, LLC

Whitehall, NY- - 18AF114 2.823 2.817 2.835 0.2 - Fine aggregate produced from 1-61R. 43.4815 -73.4375

Region 01

Natural Sand 1-63F RensselaerWarren Fane Trucking, Inc.

Wynantskill, NY- - 18AF 64 2.630 2.591 2.697 1.5 - 42.6862 -73.6177

Region 01

Natural Sand 1-68F Out of StatePike Industries Inc.

Middlebury, VT- - 18AF 91 2.623 2.598 2.665 1.0 - 44.0519 -73.0913

Page 4 of 38 3/2/2020

Page 8: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 01

Natural Sand 1-70F EssexUpstone Materials, Inc.

St. Armand, NY (Cassavaugh Bank)- - 18AF 52 2.688 2.686 2.692 0.1 - Not for Portland Cement Concrete; 44.3711 -74.0996

Region 01

Natural Sand 1-73F SchenectadyCranesville Aggregates Co., Inc.

Scotia, NY (Van Buren Bank, T. of Glenville)- - 18AF116 2.621 2.584 2.682 1.4 - 42.8554 -74.0199

Region 01

Natural Sand 1-75F SaratogaPompa Brothers IncChatfield Corner, NY

- - 18AF 44 2.695 2.683 2.717 0.5 - 43.1147 -73.9322

Region 01

Natural Sand 1-81F Out of StateJ. P. Carrara & Sons, Inc.

Middlebury, VT- - 19AF171 2.640 2.623 2.668 0.6 - 44.0061 -73.0949

Region 01

Natural Sand 1-85F WashingtonPeckham Materials Corporation

West Fort Ann, NY (Finch-Pruyn Bank)- - 18AF134 2.648 2.621 2.695 1.0 - 43.3946 -73.6095

Region 01

Natural Sand 1-86F Out of StateHinesburg Sand & Gravel

Hinesburg, VT- - 17AF128 2.671 2.646 2.714 1.0 - 44.2897 -73.0600

Region 01

Natural Sand 1-89F RensselaerWarren W. Fane Inc.Hemstreet Park, NY

- - 18AF117 2.643 2.611 2.697 1.2 - 42.8763 -73.6685

Region 01

Natural Sand 1-90F SaratogaPeckham Materials Corp.

Chatfield Corner, NY- - 19AF165 2.688 2.670 2.719 0.7 - 43.1212 -73.9292

Region 01

Natural Sand 1-95F SaratogaPallette Stone Corp.South Corinth, NY

- - 19AF062 2.701 2.689 2.723 0.5 - 43.2014 -73.8689

Region 01

Natural Sand 1-97F WashingtonJointa Galusha, LLCPattens Mills, NY

- - 19AF149 2.675 2.652 2.716 0.9 - 43.3945 -73.6032

Region 01

Natural Sand 1-103F RensselaerRifenburg Construction, Inc.

West Sand Lake, NY (Hoffay Pit)- - 18AF 162 2.604 2.547 2.701 2.2 - 42.6342 -73.5944

Region 01

Natural Sand 1-104F WarrenFort Miller Aggregates

Glens Falls, NY (Dream Lake Pit)- - 19AF123 2.684 2.667 2.712 0.6 - 43.3841 -73.6358

Region 01

Natural Sand 1-107F RensselaerS.A. Dunn & Company, LLC

North Greenbush, NY- - 18AF103 2.625 2.576 2.708 1.9 - Not for Portland Cement Concrete; 42.6511 -73.7243

Region 01

Natural Sand 1-120F EssexPeckham Materials Corp.

Ticonderoga, NY- - 18AF133 2.646 2.613 2.701 1.3 - 43.8988 -73.4423

Region 01

Natural Sand 1-121F Out of StateWilliam E. Dailey, Inc.South Shaftsbury, VT

- - 18AF135 2.717 2.705 2.739 0.5 - 42.9646 -73.1950

Region 01

Natural Sand 1-130F Out of StatePike Industries Inc.

Danby, VT- - 17AF 78 2.677 2.653 2.718 0.9 - 43.3908 -73.0019

Region 01

Manufactured Sand

1-130GFM Out of StatePike Industries Inc.

Danby, VT- - 17AF 79 2.685 2.662 2.726 0.9 - Fine aggregate produced from 1-130G. 43.3908 -73.0019

Region 01

Natural Sand 1-132F SaratogaCarver Stone Products

Halfmoon, NY- - 19AF111 2.639 2.595 2.713 1.7 - Not for Portland Cement Concrete; 42.8383 -73.6901

Region 01

Natural Sand 1-135F SaratogaTroy Topsoil Co., Inc.

Providence, NY- - 18AF112 2.655 2.625 2.707 1.2 - 43.0913 -74.0000

Region 01

Natural Sand 1-138F WashingtonCharles Friedman Excavating Inc.

Fort Ann, NY- - 19AF156 2.670 2.631 2.736 1.5 - 43.4897 -73.4914

Region 01

Natural Sand 1-138F1 WashingtonCharles Friedman Excavating, Inc.

Fort Ann, NY- - 19AF157 2.684 2.654 2.736 1.1 - Blend of 1-138F and 1-146F. 43.4897 -73.4914

Region 01

Natural Sand 1-141F RensselaerTroy Sand & Gravel Co., Inc.Schaghticoke, NY (Weir Pit)

- - 19AF101 2.650 2.621 2.699 1.1 - 42.8907 -73.6197

Region 01

Natural Sand 1-142F EssexPat Armstrong Inc.

Ticonderoga, NY- - 19AF122 2.654 2.625 2.703 1.1 - 43.8971 -73.4464

Region 01

Natural Sand 1-143F SaratogaTroy Sand & Gravel Co., Inc.

Providence, NY- - 17AF113 2.681 2.664 2.709 0.6 - 43.0897 -74.0105

Region 01

Natural Sand 1-145F Out of StateBerkshire Concrete Corp.

Hinsdale, MA- - 19AF001 2.697 2.687 2.714 0.4 - 42.4383 -73.1155

Region 01

Natural Sand 1-146F WarrenAdirondack Portable Custom Crushing

Johnsburg, NY- - 19AF066 2.700 2.685 2.725 0.5 - 43.6197 -73.9764

Page 5 of 38 3/2/2020

Page 9: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 01

Natural Sand 1-149F SaratogaConstantine Construction & Farm, Inc.

Halfmoon, NY- - 19AF112 2.665 2.629 2.728 1.4 - Not for Portland Cement Concrete; 42.8408 -73.6998

Region 01

Natural Sand 1-151F SaratogaR.J. Valente Gravel, Inc.

Stillwater, NY (Luther Forest Mine)- - 18AF 68 2.618 2.576 2.689 1.6 - Not for Portland Cement Concrete; 42.9385 -73.7230

Region 01

Natural Sand 1-153F ColumbiaTroy Sand & Gravel Co., Inc.

New Lebanon, NY- - 19AF137 2.647 2.617 2.697 1.1 - 42.4896 -73.4402

Region 01

Manufactured Sand

7-15RFM Out of StatePike Industries Inc.

Swanton, VT- - 19AF010 2.716 2.701 2.742 0.6 - Not for Portland Cement Concrete wearing surfaces; Assigned to Region 1. 44.9115 -73.1202

Page 6 of 38 3/2/2020

Page 10: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 02

Crushed Bedrock

2-1R HerkimerHanson Aggregates New York LLC

Jordanville, NYLimestone - 19AR100 2.715 2.705 2.733 0.4 NY4 42.9232 -74.9547

Region 02

Crushed Bedrock

2-5R MontgomeryCallanan Industries Inc.

Pattersonville, NYDolomite & Limestone

- 19AR037 2.789 2.777 2.811 0.4 NY4 XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;42.9049 -74.1213

Region 02

Crushed Bedrock

2-6R1 MontgomeryCushing Stone Co., Inc.

Cranesville, NYDolomite & Limestone

- 18AR 86 2.782 2.761 2.820 0.8 NY4 XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;42.9149 -74.1431

Region 02

Crushed Bedrock

2-6RS1 MontgomeryCushing Stone Co., Inc.

Cranesville, NYDolomite & Limestone

- 18AR 87S 2.699 2.685 2.722 0.5 NY4 XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;High A.I.R. dolomite and limestone. 42.9149 -74.1431

Region 02

Crushed Bedrock

2-9R OneidaHanson Aggregates New York LLC

Oriskany Falls, NYLimestone - 19AR099 2.803 2.794 2.820 0.3 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9466 -75.4584

Region 02

Crushed Bedrock

2-9RS OneidaHanson Aggregates New York LLC

Oriskany Falls, NY

Limestone &

Sandstone- 17AR 81S 2.684 2.675 2.698 0.3 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9466 -75.4584

Region 02

Crushed Bedrock

2-11R MadisonCallanan Industries Inc.

Clockville, NY (Oxbow Facility)Limestone - 19AR098 2.694 2.683 2.712 0.4 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

43.0251 -75.7270

Region 02

Crushed Bedrock

2-12R HerkimerBarrett Paving Materials Inc.

Litchfield, NYLimestone - 19AR029 2.689 2.678 2.708 0.4 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9809 -75.1946

Region 02

Crushed Bedrock

2-14R MontgomeryHanson Aggregates New York LLC.

West St. Johnsville, NYDolomite - 18AR 63 2.745 2.722 2.786 0.9 NY3 43.0089 -74.7016

Region 02

Crushed Bedrock

2-17R FultonDelaney Crushed Stone Products, Inc.

Northville, NYGranite - 18AR 26 2.843 2.832 2.864 0.4 NY1 43.2409 -74.1975

Region 02

Crushed Bedrock

2-18RS1 HerkimerMaterial Sand & Gravel Co., Inc.

Gravesville, NYLimestone - 18AR 2S 2.705 2.693 2.724 0.4 43.2636 -75.1106

Region 02

Crushed Bedrock

2-19R FultonCarver Sand & Gravel LLC

Ephratah, NY (Johnstown Quarry)Granite - 19AR028 2.820 2.808 2.841 0.4 NY1 43.0597 -74.5154

Region 02

Crushed Bedrock

2-20R HamiltonUpstone Materials, Inc.

Wells, NYLimestone - 18AR 37 2.671 2.652 2.702 0.7 NY4 43.4174 -74.2773

Region 02

Crushed Bedrock

2-21R MadisonStockbridge Stone Products

Munnsville, NYLimestone - 18AR 25 2.677 2.660 2.705 0.7 NY4 42.9664 -75.5792

Page 7 of 38 3/2/2020

Page 11: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 02

Crushed Gravel

2-9G1 FultonDelaney Crushed Stone Products Inc.

Northville, NY- 90 19AG020C 2.766 2.754 2.786 0.4 - Blend of 2-9G and 2-17R. 43.2409 -74.1975

Region 02

Crushed Gravel

2-39G HerkimerHanson Aggregates New York LLC

Russia, NY- 55 18AG 27C 2.674 2.649 2.717 0.9 - 43.2461 -75.0815

Region 02

Crushed Gravel

2-46G MontgomeryRifenburg Construction Inc.

West St. Johnsville, NY- 70 18AG 38C 2.634 2.599 2.694 1.4 - 43.0012 -74.7147

Region 02

Crushed Gravel

2-51G HerkimerPoland Sand & Gravel

Newport, NY- 40 18AG 26C 2.663 2.643 2.698 0.8 - 43.2232 -75.0505

Region 02

Crushed Gravel

2-64G OneidaRMS Gravel, Inc.

Ava, NY- 95 17AG 43C 2.619 2.582 2.680 1.4 - 43.4117 -75.5452

Region 02

Crushed Gravel

2-65G HerkimerPoland Sand & Gravel LLC

Norway, NY- 55 19AG006C 2.662 2.641 2.696 0.8 - 43.2538 -75.0032

Page 8 of 38 3/2/2020

Page 12: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 02

Natural Sand 2-1F FultonFulmont Ready Mix Co., Inc.

Johnstown, NY- - 18AF 67 2.681 2.664 2.709 0.6 - 43.0385 -74.3737

Region 02

Manufactured Sand

2-6R1FM MontgomeryCushing Stone Co., Inc.

Cranesville, NY- - 18AF 165 2.726 2.691 2.789 1.3 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 2-6R1. 42.9149 -74.1431

Region 02

Natural Sand 2-9F FultonDelaney Crushed Stone Products Inc.

Northville, NY- - 19AF049 2.729 2.719 2.747 0.4 - 43.2409 -74.1975

Region 02

Manufactured Sand

2-16RFM OneidaHanson Aggregates New York LLC

Forestport, NY- - 18AF 138 2.707 2.694 2.731 0.5 - Fine aggregate produced from 2-16R. 43.4790 -75.1486

Region 02

Natural Sand 2-18F HerkimerHanson Aggregates New York LLC

Poland, NY- - 19AF005 2.646 2.621 2.687 1.0 - 43.2409 -75.0743

Region 02

Manufactured Sand

2-18RFM HerkimerMaterial Sand & Gravel Co., Inc.

Gravesville, NY- - 17AF180 2.680 2.656 2.719 0.9 - Not for Portland Cement Concrete; Fine aggregate produced from 2-18R. 43.2636 -75.1106

Region 02

Manufactured Sand

2-19RFM FultonCarver Sand & Gravel LLC

Ephratah, NY (Johnstown Quarry)- - 19AF035 2.776 2.764 2.798 0.4 - Fine aggregate produced from 2-19R. 43.0597 -74.5154

Region 02

Natural Sand 2-46F MontgomeryRifenburg Construction Inc

West St. Johnsville, NY- - 19AF003 2.619 2.583 2.680 1.4 - 43.0012 -74.7147

Region 02

Natural Sand 2-51F HerkimerPoland Sand & Gravel

Newport, NY- - 18AF 85 2.653 2.637 2.679 0.6 - 43.2232 -75.0505

Region 02

Natural Sand 2-59F FultonFurman Aggregates

Gloversville, NY- - 18AF 65 2.693 2.672 2.728 0.8 - 43.0645 -74.3176

Region 02

Natural Sand 2-63F FultonCarver Sand & Gravel, LLC

Ephratah, NY- - 19AF128 2.660 2.636 2.700 0.9 - 43.0597 -74.5154

Region 02

Natural Sand 2-65F HerkimerPoland Sand & Gravel LLC

Norway, NY- - 19AF004 2.644 2.628 2.672 0.6 - 43.2538 -75.0032

Region 02

Natural Sand 2-66F FultonReed Sand & Gravel Mine

Vail Mills, NY- - 18AF 2 2.663 2.651 2.683 0.5 - 43.0622 -74.2444

Page 9 of 38 3/2/2020

Page 13: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 03

Crushed Bedrock

3-3R OnondagaHanson Aggregates New York LLC

Jamesville, NYLimestone - 19AR081 2.707 2.683 2.748 0.9 NY4 42.9961 -76.0308

Region 03

Crushed Bedrock

3-3RS OnondagaHanson Aggregates New York LLC

Jamesville, NYLimestone & Dolomite

- 19AR082S 2.668 2.645 2.709 0.9 Not for Portland Cement Concrete; 42.9961 -76.0308

Region 03

Crushed Bedrock

3-4R SenecaSeneca Stone Corp.

Canoga, NYLimestone - 18AR 62 2.690 2.676 2.715 0.5 NY4 42.8528 -76.7808

Region 03

Crushed Bedrock

3-9R OnondagaHanson Aggregates New York LLC

Skaneateles, NYLimestone - 19AR079 2.767 2.749 2.799 0.7 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

43.0055 -76.4171

Region 03

Crushed Bedrock

3-9R1 OnondagaHanson Aggregates New York LLC

Skaneateles, NYLimestone - 19AR080 2.672 2.646 2.716 1.0 Not for Portland Cement Concrete; 43.0055 -76.4171

Region 03

Crushed Bedrock

3-10R OnondagaHanson Aggregates New York LLC

Marcellus, NYLimestone - 19AR088 2.684 2.670 2.707 0.5 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

43.0097 -76.3637

Region 03

Crushed Bedrock

3-11R CayugaHanson Aggregates New York LLC

Oakwood, NYLimestone - 19AR107 2.648 2.629 2.680 0.7 Not for Portland Cement Concrete; 42.8884 -76.6424

Region 03

Crushed Bedrock

3-13R OnondagaT.H. Kinsella, Inc.Fayetteville, NY

Limestone & Dolomite

- 19AR089 2.720 2.677 2.799 1.6 NY4 43.0301 -75.9603

Region 03

Crushed Bedrock

3-14R WayneHanson Aggregates New York LLC

Butler, NYLimestone & Dolomite

- 18AR 74 2.737 2.715 2.778 0.8 NY4 43.1993 -76.7156

Page 10 of 38 3/2/2020

Page 14: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 03

Crushed Gravel

3-17G OnondagaHanson Aggregates, New York LLC

South Onondaga, NY- 35 19AG003C 2.733 2.707 2.777 0.9 - 42.9362 -76.2192

Region 03

Crushed Gravel

3-20G CortlandPolkville Crushed Stone Co.

Polkville, NY- 60 19AG030C 2.592 2.556 2.652 1.4 - 42.5872 -76.1358

Region 03

Crushed Gravel

3-45G TompkinsRMS Gravel, Inc.

Freeville, NY- 60 19AG034 2.692 2.652 2.762 1.5 - Check % crushed prior to intended use. 42.5044 -76.3216

Region 03

Crushed Gravel

3-54G OnondagaCranesville Block Co., Inc.

Tully, NY- 25 19AG035C 2.689 2.654 2.749 1.3 - 42.8084 -76.1392

Region 03

Crushed Gravel

3-63G OnondagaT.H. Kinsella, Inc.Delphi Falls, NY

- 30 16AG 12C 2.679 2.651 2.728 1.1 - 42.8868 -75.9108

Region 03

Crushed Gravel

3-69G OnondagaT.H. Kinsella, Inc.

Fabius, NY (Dwyer Gravel Mine)- 20 16AG 13C 2.687 2.657 2.741 1.2 - 42.8572 -75.9175

Region 03

Crushed Gravel

3-74G OnondagaSmith Sand & Gravel, Inc.Marietta, NY (Davis Pit)

- 25 18AG 37C 2.682 2.644 2.747 1.5 - 42.8997 -76.3038

Region 03

Crushed Gravel

3-75G OswegoSyracuse Sand & Gravel, LLC

Hannibal, NY (Summerville pit)- 85 19AG029C 2.638 2.600 2.705 1.5 - 43.2597 -76.5409

Page 11 of 38 3/2/2020

Page 15: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 03

Manufactured Sand

3-3RFM OnondagaHanson Aggregates New York LLC

Jamesville, NY- - 19AF126 2.709 2.694 2.733 0.5 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 3-3R. 42.9961 -76.0308

Region 03

Manufactured Sand

3-3RSFM OnondagaHanson Aggregates New York LLC

Jamesville, NY- - 19AF127 2.703 2.679 2.744 0.9 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 3-3RS. 42.9961 -76.0308

Region 03

Manufactured Sand

3-4RFM SenecaSeneca Stone Corp.

Canoga, NY- - 18AF107 2.644 2.618 2.689 1.0 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 3-4R. 42.8528 -76.7808

Region 03

Manufactured Sand

3-9RFM OnondagaHanson Aggregates New York LLC

Skaneateles, NY- - 19AF125 2.640 2.602 2.705 1.5 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 3-9R. 43.0055 -76.4171

Region 03

Manufactured Sand

3-10RFM OnondagaHanson Aggregates New York LLC

Marcellus, NY- - 19AF175 2.643 2.604 2.709 1.5 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 3-10R. 43.0097 -76.3637

Region 03

Manufactured Sand

3-13RFM OnondagaT.H. Kinsella, Inc.Fayetteville, NY

- - 19AF139 2.688 2.651 2.754 1.4 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 3-13R. 43.0301 -75.9603

Region 03

Manufactured Sand

3-14RFM WayneHanson Aggregates New York LLC

Butler, NY- - 18AF131 2.743 2.733 2.760 0.4 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 3-14R. 43.1993 -76.7156

Region 03

Natural Sand 3-17F OnondagaHanson Aggregates New York LLC

South Onondaga, NY- - 18AF106 2.654 2.617 2.717 1.4 - 42.9362 -76.2192

Region 03

Natural Sand 3-20F CortlandPolkville Crushed Stone Co.

Polkville, NY- - 19AF097 2.644 2.604 2.712 1.5 - 42.5872 -76.1358

Region 03

Manufactured Sand

3-20GFM CortlandPolkville Crushed Stone Co.

Polkville, NY- - 19AF098 2.641 2.602 2.708 1.5 - Not for Portland Cement Concrete; Fine aggregate produced from 3-20G. 42.5872 -76.1358

Region 03

Natural Sand 3-29F OswegoSyracuse Sand & Gravel, LLC

Constantia, NY- - 18AF132 2.608 2.584 2.649 1.0 - 43.2896 -75.9202

Region 03

Natural Sand 3-45F TompkinsRMS Gravel, Inc.

Freeville, NY- - 19AF109 2.650 2.614 2.711 1.4 - 42.5044 -76.3216

Region 03

Natural Sand 3-54F OnondagaCranesville Block Co., Inc.

Tully, NY- - 19AF110 2.653 2.614 2.719 1.5 - 42.8084 -76.1392

Region 03

Natural Sand 3-59F OswegoSyracuse Sand & Gravel, LLC

Granby, NY- - 16AF 92 2.616 2.592 2.657 1.0 - Material from above water table. 43.3604 -76.4898

Region 03

Natural Sand 3-63F OnondagaT.H. Kinsella, Inc.Delphi Falls, NY

- - 16AF 93 2.646 2.596 2.732 1.9 - 42.8868 -75.9108

Region 03

Natural Sand 3-67F CortlandT.H. Kinsella, Inc.

Homer, NY (E-Z Acres Gravel Mine)- - 18AF 5 2.634 2.599 2.694 1.4 - 42.6574 -76.2097

Region 03

Natural Sand 3-69F OnondagaT.H. Kinsella, Inc.

Fabius, NY (Dwyer Gravel Mine)- - 16AF 94 2.642 2.588 2.736 2.1 - 42.8572 -75.9175

Region 03

Natural Sand 3-72F OswegoLindsey Aggregates

Fulton, NY (North Pit)- - 19AF074 2.611 2.581 2.660 1.2 - Material from below water table. 43.3967 -76.3160

Region 03

Natural Sand 3-74F OnondagaSmith Sand & Gravel, Inc.Marietta, NY (Davis Pit)

- - 18AF108 2.649 2.618 2.701 1.2 - 42.8997 -76.3038

Region 03

Natural Sand 3-75F OswegoSyracuse Sand & Gravel, LLC

Hannibal, NY (Summerville Pit)- - 19AF096 2.612 2.572 2.681 1.6 - 43.2597 -76.5409

Page 12 of 38 3/2/2020

Page 16: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 04

Crushed Bedrock

3-8R WayneDolomite Products Co., Inc.

Walworth, NYDolomite - 18AR 88 2.728 2.699 2.781 1.1 NY2 Assigned to Region 4. 43.1653 -77.3170

Region 04

Crushed Bedrock

3-8RS WayneDolomite Products Co., Inc.

Walworth, NYDolomite - 19AR072S 2.809 2.791 2.843 0.7 NY2

High A.I.R. dolomite. Assigned to Region 4.

43.1653 -77.3170

Region 04

Crushed Bedrock

4-3R GeneseeHanson Aggregates New York LLC

Stafford, NYLimestone - 18AR 66 2.682 2.669 2.703 0.5 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9779 -78.0960

Region 04

Crushed Bedrock

4-3RS GeneseeHanson Aggregates New York LLC

Stafford, NYLimestone - 19AR090S 2.631 2.620 2.648 0.4 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.9779 -78.0960

Region 04

Crushed Bedrock

4-4R MonroeDolomite Products Co., Inc.

Penfield, NYDolomite - 19AR073 2.723 2.698 2.768 1.0 NY2 43.1463 -77.4804

Region 04

Crushed Bedrock

4-4RS MonroeDolomite Products Co. Inc.

Penfield, NYDolomite - 19AR074S 2.740 2.710 2.796 1.1 NY3 High A.I.R. dolomite. 43.1463 -77.4804

Region 04

Crushed Bedrock

4-8R OntarioHanson Aggregates New York LLC

Phelps, NYLimestone - 16AR 68 2.681 2.673 2.696 0.3 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9336 -77.0199

Region 04

Crushed Bedrock

4-9R OrleansHanson Aggregates New York LLC

Clarendon, NYDolomite - 18AR 85 2.778 2.747 2.835 1.1 NY2 43.1886 -78.0757

Region 04

Crushed Bedrock

4-10R LivingstonHanson Aggregates New York LLC

Lima, NYLimestone - 18AR 67 2.692 2.672 2.725 0.7 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9388 -77.6322

Region 04

Crushed Bedrock

4-10RS LivingstonHanson Aggregates New York LLC

Lima, NYLimestone - 18AR68S 2.657 2.644 2.678 0.5 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.9388 -77.6322

Region 04

Crushed Bedrock

4-11R OntarioDolomite Products Co., Inc.

Manchester, NYLimestone - 19AR075 2.668 2.652 2.696 0.6 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9466 -77.1794

Region 04

Crushed Bedrock

4-11RS OntarioDolomite Products Co., Inc.

Manchester, NYLimestone - 16AR 83S 2.685 2.674 2.704 0.4 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.9466 -77.1794

Region 04

Crushed Bedrock

4-12R GeneseeDolomite Products Co. Inc.

Leroy, NYLimestone - 18AR 69 2.662 2.651 2.682 0.5 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.9909 -77.9366

Region 04

Crushed Bedrock

4-16R OrleansShelby Crushed Stone Products

Shelby Center, NYDolomite - 18AR 70 2.745 2.709 2.811 1.4 NY2 43.1862 -78.4294

Region 04

Crushed Bedrock

4-18R OrleansKeeler Construction Co., Inc.

Albion, NY (Barre Stone Products, Wilson Quarry)

Dolomite - 19AR076 2.786 2.758 2.838 1.0 NY2 43.2045 -78.2120

Region 04

Crushed Bedrock

4-19R OrleansKeeler Construction Co., Inc.

Medina, NY (Fruit Avenue Quarry)Sandstone - 18AR 71 2.533 2.470 2.636 2.5 43.2238 -78.4388

Region 04

Crushed Bedrock

4-20R MonroeDolomite Products Co. Inc.

Ogden Center, NYDolomite - 18AR 83 2.762 2.733 2.816 1.1 NY2 Not for Portland Cement Concrete; 43.1628 -77.7958

Region 04

Crushed Bedrock

4-22R WayneStone Goose Aggregates LLC

Sodus, NYDolomite & Limestone

- 18AR 58 2.719 2.687 2.775 1.2 NY4 43.1786 -77.0155

Page 13 of 38 3/2/2020

Page 17: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 04

Crushed Gravel

4-8G OntarioHanson Aggregates New York LLC

Five Points, NY- 25 18AG 57C 2.700 2.667 2.758 1.2 - Material from below water table. 42.9466 -76.9946

Region 04

Crushed Gravel

4-10G OntarioHanson Aggregates New York LLC

Victor, NY- 35 18AG 51C 2.681 2.642 2.750 1.5 - 42.9727 -77.4656

Region 04

Crushed Gravel

4-11G OntarioSyracusa Sand & Gravel, Inc.

Victor, NY- 30 18AG 50C 2.686 2.646 2.756 1.5 - 42.9675 -77.4511

Region 04

Crushed Gravel

4-33G LivingstonValley Sand & Gravel, Inc.

Avon, NY- 15 18AG 49C 2.710 2.676 2.771 1.3 - 42.9233 -77.7812

Region 04

Crushed Gravel

4-58G1 GeneseeHanson Aggregates New York LLC

Batavia, NY- 35 18AG 40C 2.669 2.626 2.744 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from above water table. 42.9753 -78.1648

Region 04

Crushed Gravel

4-68G LivingstonOak Openings, LLC

Avon, NY- 25 18AG 35C 2.657 2.617 2.727 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9185 -77.6615

Region 04

Crushed Gravel

4-71G OntarioSyracuse Sand & Gravel, LLC

Phelps, NY- 40 17AG 37C 2.690 2.658 2.745 1.2 - Check % crushed prior to intended use. 42.9957 -77.0323

Region 04

Crushed Gravel

4-86G OntarioDolomite Products Co., Inc. dba Cleason

MaterialsPalmyra, NY

- 35 19AG032C 2.664 2.626 2.728 1.4 - 43.0568 -77.1436

Page 14 of 38 3/2/2020

Page 18: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 04

Manufactured Sand

3-8RFM WayneDolomite Products Co., Inc.

Walworth, NY- - 19AF105 2.726 2.692 2.787 1.3 - Not for Portland Cement Concrete wearing surfaces;

Fine aggregate produced from 3-8R/3-8RS. Assigned to Region 4.

43.1653 -77.3170

Region 04

Natural Sand 4-1F GeneseeFrey Sand & Gravel

Alexander, NY- - 19AF131 2.641 2.609 2.696 1.2 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.8897 -78.2363

Region 04

Manufactured Sand

4-3RFM GeneseeHanson Aggregates New York LLC

Stafford, NY- - 18AF120 2.667 2.649 2.697 0.7 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 4-3R. 42.9779 -78.0960

Region 04

Manufactured Sand

4-3RSFM GeneseeHanson Aggregates New York LLC

Stafford, NY- - 19AF151 2.629 2.614 2.654 0.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 4-3RS. 42.9779 -78.0960

Region 04

Manufactured Sand

4-4RFM MonroeDolomite Products Co. Inc.

Penfield, NY- - 18AF121 2.746 2.730 2.774 0.6 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 4-4R. 43.1463 -77.4804

Region 04

Manufactured Sand

4-4RSFM MonroeDolomite Products Co., Inc.

Penfield, NY- - 19AF106 2.681 2.653 2.729 1.0 - Fine aggregate produced from 4-4RS. 43.1463 -77.4804

Region 04

Natural Sand 4-8F OntarioHanson Aggregates New York LLC

Five Points, NY- - 18AF 157 2.658 2.621 2.721 1.4 - 42.9466 -76.9946

Region 04

Manufactured Sand

4-8RFM OntarioHanson Aggregates New York LLC

Phelps, NY- - 19AF140 2.682 2.660 2.720 0.8 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 4-8R. 42.9336 -77.0199

Region 04

Manufactured Sand

4-9RFM OrleansHanson Aggregates New York LLC

Clarendon, NY- - 18AF 159 2.779 2.761 2.813 0.7 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 4-9R. 43.1886 -78.0757

Region 04

Natural Sand 4-10F OntarioHanson Aggregates New York LLC

Victor, NY- - 18AF 158 2.665 2.634 2.718 1.2 - 42.9727 -77.4656

Region 04

Manufactured Sand

4-10RSFM LivingstonHanson Aggregates New York LLC

Lima, NY- - 18AF122 2.637 2.618 2.670 0.8 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 4-10RS. 42.9388 -77.6322

Region 04

Natural Sand 4-11F OntarioSyracusa Sand & Gravel, Inc.

Victor, NY- - 19AF135 2.665 2.625 2.735 1.5 - 42.9675 -77.4511

Region 04

Manufactured Sand

4-11GFM OntarioSyracusa Sand & Gravel, Inc.

Victor, NY- - 18AF 155 2.655 2.615 2.725 1.5 - Not for Portland Cement Concrete; Fine aggregate produced from 4-11G. 42.9675 -77.4511

Region 04

Manufactured Sand

4-11RFM OntarioDolomite Products Co., Inc.

Manchester, NY- - 19AF107 2.640 2.615 2.683 1.0 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 4-11R. 42.9466 -77.1794

Region 04

Manufactured Sand

4-12RFM GeneseeDolomite Products Co. Inc.

Leroy, NY- - 18AF123 2.634 2.613 2.670 0.8 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 4-12R. 42.9909 -77.9366

Region 04

Manufactured Sand

4-16RFM OrleansShelby Crushed Stone Products

Shelby Center, NY- - 18AF124 2.786 2.769 2.816 0.6 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 4-16R. 43.1862 -78.4294

Region 04

Manufactured Sand

4-18RFM OrleansKeeler Construction Co., Inc.

Albion, NY (Barre Stone Products, Wilson Quarry)

- - 18AF126 2.781 2.760 2.819 0.8 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 4-18R. 43.2045 -78.2120

Region 04

Manufactured Sand

4-19RFM OrleansKeeler Consruction Co., Inc.

Medina, NY (Fruit Avenue Quarry)- - 18AF127 2.572 2.533 2.636 1.5 - Not for Portland Cement Concrete; Fine aggregate produced from 4-19R. 43.2238 -78.4388

Region 04

Manufactured Sand

4-20RFM MonroeDolomite Products Co. Inc.

Ogden Center, NY- - 18AF 154 2.773 2.750 2.814 0.8 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 4-20R. 43.1628 -77.7958

Region 04

Manufactured Sand

4-22RFM WayneStone Goose Aggregates LLC

Sodus, NY- - 18AF101 2.697 2.661 2.760 1.4 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 4-22R. 43.1786 -77.0155

Region 04

Natural Sand 4-33F LivingstonValley Sand & Gravel, Inc.

Avon, NY- - 19AF133 2.660 2.614 2.739 1.8 - 42.9233 -77.7812

Region 04

Natural Sand 4-49F OrleansEagle Harbor Sand & Gravel

Barre, NY- - 19AF117 2.650 2.626 2.690 0.9 - 43.1784 -78.2554

Region 04

Natural Sand 4-58F1 GeneseeHanson Aggregates New York LLC

Batavia, NY- - 18AF128 2.658 2.627 2.712 1.2 - Southern Pit. 42.9753 -78.1648

Region 04

Natural Sand 4-68F LivingstonOak Openings, LLC

Avon, NY- - 18AF105 2.636 2.594 2.708 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9185 -77.6615

Page 15 of 38 3/2/2020

Page 19: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 04

Natural Sand 4-71F OntarioSyracuse Sand & Gravel, LLC

Phelps, NY- - 19AF134 2.662 2.636 2.707 1.0 - 42.9957 -77.0323

Region 04

Natural Sand 4-75F WayneDendis Sand & Gravel, Inc.

Newark, NY- - 19AF124 2.657 2.622 2.716 1.3 - 43.0706 -77.1040

Region 04

Natural Sand 4-86F OntarioDolomite Products Co., Inc. dba Cleason

MaterialsPalmyra, NY

- - 19AF108 2.640 2.595 2.718 1.8 - 43.0568 -77.1436

Region 04

Natural Sand 4-92F WayneSmith's Gravel Pit

Sodus, NY- - 19AF132 2.610 2.573 2.671 1.4 - 43.1967 -77.0426

Page 16 of 38 3/2/2020

Page 20: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 05

Crushed Bedrock

5-3R ErieNew Enterprise Stone & Lime Co, Inc.

Williamsville, NYLimestone - 19AR019 2.655 2.638 2.683 0.6 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.9519 -78.6503

Region 05

Crushed Bedrock

5-4R NiagaraLafarge North America

Niagara Falls, NYDolomite - 19AR020 2.743 2.704 2.813 1.4 NY4 43.1278 -78.9571

Region 05

Crushed Bedrock

5-5R NiagaraLafarge North America

Lockport, NYDolomite & Limestone

- 19AR021 2.770 2.738 2.830 1.2 NY3 43.1544 -78.7165

Region 05

Crushed Bedrock

5-7R ErieCounty Line Stone Co. Inc.

Akron, NYLimestone - 18AR 1 2.671 2.657 2.694 0.5 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.9727 -78.4692

Region 05

Crushed Bedrock

5-7RS ErieCounty Line Stone Co. Inc.

Akron, NYLimestone - 18AR 60S 2.653 2.636 2.682 0.7 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.9727 -78.4692

Region 05

Crushed Bedrock

5-18R Out of StateLafarge Canada Inc.Dundas, ON Canada

Dolomite - 19AR101 2.749 2.725 2.791 0.9 NY2 43.3189 -80.0063

Page 17 of 38 3/2/2020

Page 21: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 05

Crushed Gravel

5-3G CattaraugusNew Enterprise Stone & Lime Co, Inc.

Franklinville, NY- 65 19AG013C 2.623 2.584 2.689 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.3789 -78.4765

Region 05

Crushed Gravel

5-22G CattaraugusCountry Side Sand & Gravel, Inc.

South Dayton, NY- 65 19AG036C 2.664 2.635 2.713 1.1 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.3685 -78.9946

Region 05

Crushed Gravel

5-30G CattaraugusLafarge North America

Delevan NY- 70 19AG012C 2.635 2.598 2.697 1.4 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4519 -78.4439

Region 05

Crushed Gravel

5-33G CattaraugusCorbett Hill Gravel Products Inc.

Randolph, NY- 80 19AG014C 2.631 2.594 2.695 1.4 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.1080 -78.9475

Region 05

Crushed Gravel

5-39G CattaraugusGernatt Asphalt Products Inc.

Freedom, NY- 70 19AG038 2.608 2.560 2.691 1.9 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4890 -78.3618

Region 05

Crushed Gravel

5-64G CattaraugusGernatt Asphalt Products Inc.

Great Valley, NY- 90 19AG039C 2.609 2.565 2.684 1.7 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.1862 -78.6721

Region 05

Crushed Gravel

5-90G Out of StateLafarge Canada Inc.

Cambridge, ON, Canada- 5 19AG053C 2.748 2.716 2.804 1.2 - 43.3272 -80.3979

Region 05

Crushed Gravel

5-96G CattaraugusUngerman Excavating, Inc.

Machias, NY- 75 18AG 8C 2.623 2.582 2.693 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.3958 -78.4763

Region 05

Crushed Gravel

5-102G CattaraugusD&H Materials Inc.

Delevan, NY- 85 19AG037C 2.514 2.470 2.584 1.8 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4727 -78.4879

Page 18 of 38 3/2/2020

Page 22: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 05

Natural Sand 5-3F CattaraugusNew Enterprise Stone & Lime Co, Inc.

Franklinville, NY- - 19AF028 2.622 2.584 2.686 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.3789 -78.4765

Region 05

Natural Sand 5-11F CattaraugusIA Construction Corp.

Allegany, NY (EF Lippert Mine)- - 18AF 26 2.618 2.579 2.683 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.0976 -78.5562

Region 05

Natural Sand 5-22F CattaraugusCountry Side Sand & Gravel, Inc.

South Dayton, NY- - 19AF114 2.655 2.626 2.706 1.1 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.3685 -78.9946

Region 05

Natural Sand 5-30F CattaraugusLafarge North America

Delevan, NY- - 19AF027 2.619 2.580 2.684 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4519 -78.4439

Region 05

Natural Sand 5-31F CattaraugusGernatt Asphalt Products Inc.

Gowanda, NY (Point Peter Rd Bank)- - 19AF113 2.575 2.522 2.663 2.1 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4310 -78.9076

Region 05

Natural Sand 5-31F1 CattaraugusGernatt Asphalt Products Inc.

Gowanda, NY (Point Peter Rd Bank)- - 18AF 27 2.618 2.575 2.689 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Blend of 5-31F and 5-81F. 42.4310 -78.9076

Region 05

Natural Sand 5-33F CattaraugusCorbett Hill Gravel Products Inc.

Randolph, NY- - 19AF029 2.612 2.565 2.692 1.8 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.1080 -78.9475

Region 05

Natural Sand 5-39F CattaraugusGernatt Asphalt Products Inc.

Freedom, NY- - 19AF115 2.614 2.572 2.684 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4909 -78.3677

Region 05

Natural Sand 5-56F ErieGernatt Asphalt Products Inc.

Springville, NY (Middle Road Bank)- - 18AF 28 2.603 2.558 2.679 1.8 - Not for Portland Cement Concrete; 42.5335 -78.6494

Region 05

Natural Sand 5-64F CattaraugusGernatt Asphalt Products Inc.

Great Valley, NY- - 19AF116 2.611 2.573 2.674 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.1862 -78.6721

Region 05

Natural Sand 5-77F ChautauquaMonofrax Inc.

Jamestown, NY- - 17AF 51 2.585 2.563 2.622 0.9 - Not for Portland Cement Concrete; Reclaimed foundry sand. 42.1185 -79.1794

Region 05

Natural Sand 5-81F ErieDan Gernatt Gravel Products Inc.

Collins, NY (Vail Road Bank)- - 18AF 29 2.610 2.569 2.678 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4522 -78.9076

Region 05

Natural Sand 5-90F Out of StateLafarge Canada Inc.

Cambridge, ON, Canada- - 19AF162 2.716 2.692 2.758 0.9 - Not for Portland Cement Concrete wearing surfaces; 43.3272 -80.3979

Region 05

Natural Sand 5-96F CattaraugusUngerman Excavating, Inc.

Machias, NY- - 18AF 30 2.610 2.565 2.684 1.7 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.3958 -78.4763

Region 05

Manufactured Sand

5-96GFM CattaraugusUngerman Excavating, Inc.

Machias, NY- - 18AF 31 2.619 2.577 2.691 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 5-96G. 42.3958 -78.4763

Region 05

Natural Sand 5-100F CattaraugusSchwab Aggregates

Delevan, NY- - 19AF030 2.580 2.524 2.673 2.2 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4444 -78.4241

Region 05

Natural Sand 5-101F ChautauquaFrew Run Gravel Products

Frewsburg, NY- - 19AF031 2.593 2.545 2.675 1.9 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.0397 -79.1228

Region 05

Natural Sand 5-102F CattaraugusD&H Materials Inc.

Delevan, NY- - 19AF026 2.621 2.580 2.690 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4727 -78.4879

Page 19 of 38 3/2/2020

Page 23: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 06

Crushed Bedrock

6-1R SteubenA.L. BladesBath, NY

Graywacke - 19AR096 2.593 2.534 2.693 2.3Approved for bituminous concrete base, binder and leveling

courses only;

Not for use in Portland Cement Concrete. Not for use in bituminous top course

pavements.42.3160 -77.3454

Region 06

Crushed Bedrock

6-2R Out of StateNew Enterprise Stone & Lime Co., Inc.

Roaring Spring, PALimestone & Dolomite

- 16AR 44 2.818 2.805 2.840 0.4 NY2 40.3480 -78.3991

Page 20 of 38 3/2/2020

Page 24: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 06

Crushed Gravel

6-20G SteubenKnight Settlement Sand & Gravel, LLC

Bath, NY- 60 19AG015C 2.636 2.603 2.692 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.3554 -77.3569

Region 06

Crushed Gravel

6-21G Out of StateDalrymple Gravel & Contracting Co. Inc.

Wilawana, PA- 75 19AG021C 2.689 2.650 2.758 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from above water table. 42.0014 -76.6192

Region 06

Crushed Gravel

6-21G1 Out of StateDalrymple Gravel & Contracting Co., Inc.

Wilawana, PA- 75 19AG028C 2.608 2.571 2.668 1.4 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.0014 -76.6192

Region 06

Crushed Gravel

6-32G SteubenSpallina Materials Inc.

Cohocton, NY- 55 18AG 29C 2.659 2.624 2.719 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4899 -77.5066

Region 06

Crushed Gravel

6-33G SteubenA.L. BladesHoward, NY

- 50 19AG016C 2.656 2.623 2.712 1.3 - XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;42.3565 -77.5049

Region 06

Crushed Gravel

6-49G AlleganyNew Enterprise Stone & Lime Co, Inc.

Alfred, NY- 50 19AG054C 2.636 2.606 2.685 1.1 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.2705 -77.7601

Region 06

Crushed Gravel

6-55G1 SteubenDalrymple Gravel & Contracting Co. Inc.

Savona, NY- 60 18AG 39C 2.641 2.604 2.705 1.4 - 42.2845 -77.2274

Region 06

Crushed Gravel

6-61G ChemungEdger Civil & Utility, LLC

Horseheads, NY- 70 18AG 56C 2.651 2.616 2.710 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.1347 -76.8073

Region 06

Crushed Gravel

6-75G SteubenDalrymple Gravel & Contracting Co. Inc.

Erwin, NY- 70 18AG 45C 2.620 2.576 2.695 1.7 - Material from below water table. 42.1800 -77.1544

Region 06

Crushed Gravel

6-77G ChemungBothar Construction, LLC

Southport, NY (Maple Ave. Mine)- 75 19AG058C 2.625 2.577 2.707 1.9 - 42.0613 -76.7727

Region 06

Crushed Gravel

6-81G ChemungDalrymple Gravel & Contracting Co. Inc.

Chemung, NY- 95 19AG050C 2.630 2.578 2.719 2.0 - 42.0203 -76.6678

Region 06

Crushed Gravel

6-82G SteubenAustin Construction LLC

Campbell, NY (Route 125 Pit)- 75 19AG017C 2.632 2.599 2.688 1.3 - 42.2485 -77.2131

Page 21 of 38 3/2/2020

Page 25: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 06

Manufactured Sand

6-2RFM Out of StateNew Enterprise Stone & Lime Co., Inc.

Roaring Spring, PA- - 16AF 61 2.796 2.776 2.833 0.7 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 6-2R. 40.3480 -78.3991

Region 06

Natural Sand 6-20F SteubenKnight Settlement Sand & Gravel, LLC

Bath, NY- - 19AF036 2.627 2.589 2.692 1.5 - 42.3554 -77.3569

Region 06

Natural Sand 6-21F Out of StateDalrymple Gravel & Contracting Co. Inc.

Wilawana, PA- - 18AF 53 2.634 2.601 2.690 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from above water table. 42.0014 -76.6192

Region 06

Natural Sand 6-21F1 Out of StateDalrymple Gravel & Contracting Co., Inc.

Wilawana, PA- - 19AF092 2.650 2.611 2.716 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.0014 -76.6192

Region 06

Manufactured Sand

6-21GFM Out of StateDalrymple Gravel & Contracting Co., Inc.

Wilawana, PA- - 18AF 54 2.634 2.601 2.691 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from above water table. Fine aggregate produced from 6-21G.

42.0014 -76.6192

Region 06

Manufactured Sand

6-21GFM1 Out of StateDalrymple Gravel & Contracting Co. Inc.

Wilawana, PA- - 19AF093 2.647 2.607 2.716 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. Fine aggregate produced from 6-21G1.

42.0014 -76.6192

Region 06

Natural Sand 6-32F SteubenSpallina Materials Inc.

Cohocton, NY- - 18AF 92 2.643 2.605 2.707 1.4 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.4899 -77.5066

Region 06

Natural Sand 6-33F SteubenA.L. BladesHoward, NY

- - 19AF037 2.619 2.578 2.689 1.6 - XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;42.3565 -77.5049

Region 06

Natural Sand 6-49F AlleganyNew Enterprise Stone & Lime Co, Inc.

Alfred, NY- - 17AF106 2.641 2.608 2.698 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.2705 -77.7601

Region 06

Natural Sand 6-55F SteubenDalrymple Gravel & Contracting Co. Inc.

Savona, NY- - 18AF109 2.627 2.596 2.680 1.2 - 42.2845 -77.2274

Region 06

Manufactured Sand

6-55GFM SteubenDalrymple Gravel & Contracting Co. Inc.

Savona, NY- - 18AF110 2.637 2.603 2.695 1.3 - Not for Portland Cement Concrete; Fine aggregate produced from 6-55G. 42.2845 -77.2274

Region 06

Manufactured Sand

6-61GFM ChemungEdger Civil & Utility, LLC

Horseheads, NY- - 18AF 167 2.651 2.619 2.706 1.2 - Not for Portland Cement Concrete; Fine aggregate produced from 6-61G. 42.1347 -76.8073

Region 06

Natural Sand 6-75F SteubenDalrymple Gravel & Contracting Co. Inc.

Erwin, NY- - 18AF 141 2.621 2.585 2.680 1.4 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. 42.1800 -77.1544

Region 06

Manufactured Sand

6-75GFM SteubenDalrymple Gravel & Contracting Co. Inc.

Erwin, NY- - 18AF 142 2.618 2.579 2.684 1.5 - Fine aggregate produced from 6-75G. 42.1800 -77.1544

Region 06

Manufactured Sand

6-77GFM ChemungBothar Construction, LLC

Southport, NY (Maple Ave. Mine)- - 15AF 31 2.663 2.630 2.720 1.3 - Not for Portland Cement Concrete; Fine aggregate produced from 6-77G. 42.0613 -76.7727

Region 06

Natural Sand 6-81F ChemungDalrymple Gravel & Contracting Co. Inc.

Chemung, NY- - 19AF153 2.622 2.572 2.708 2.0 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.0203 -76.6678

Region 06

Manufactured Sand

6-81GFM ChemungDalrymple Gravel & Contracting Co. Inc.

Chemung, NY- - 19AF154 2.630 2.589 2.700 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 6-81G. 42.0203 -76.6678

Region 06

Natural Sand 6-82F SteubenAustin Construction LLC

Campbell, NY (Route 125 Pit)- - 18AF 72 2.587 2.546 2.654 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.2485 -77.2131

Region 06

Manufactured Sand

6-82GFM SteubenAustin Construction LLC

Campbell, NY (Route 125 Pit)- - 19AF038 2.569 2.508 2.673 2.5 - Not for Portland Cement Concrete; Fine aggregate produced from 6-82G. 42.2485 -77.2131

Page 22 of 38 3/2/2020

Page 26: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 07

Crushed Bedrock

7-1R St. LawrenceBarrett Paving Materials Inc.

Norwood, NYDolomite - 18AR 65 2.753 2.728 2.799 0.9 NY2 44.7820 -74.9909

Region 07

Crushed Bedrock

7-1RS St. LawrenceBarrett Paving Materials Inc.

Norwood, NYDolomite - 19AR097S 2.730 2.718 2.752 0.4 NY2 High A.I.R. dolomite. 44.7835 -74.9889

Region 07

Crushed Bedrock

7-3R ClintonUpstone Materials, Inc.

Plattsburgh, NYLimestone - 18AR 45 2.720 2.705 2.747 0.6 NY4 44.7152 -73.4739

Region 07

Crushed Bedrock

7-5R JeffersonHanson Aggregates New York Inc.

Watertown, NYLimestone - 18AR 29 2.707 2.695 2.728 0.5 NY4 43.9857 -75.8713

Region 07

Crushed Bedrock

7-5RS JeffersonHanson Aggregates New York Inc.

Watertown, NYLimestone - 18AR 30S 2.705 2.694 2.724 0.4 Not for Portland Cement Concrete; 43.9857 -75.8713

Region 07

Crushed Bedrock

7-7R St. LawrenceMitchell Stone Products, LLCStar Lake, NY (Benson Mine)

Granite - 19AR061 2.669 2.650 2.701 0.7 NY3 44.1669 -75.0045

Region 07

Crushed Bedrock

7-8R St. LawrenceHanson Aggregates New York Inc.

Ogdensburg, NYDolomite - 19AR038 2.714 2.674 2.787 1.5 NY2 High A.I.R. dolomite. 44.6813 -75.5080

Region 07

Crushed Bedrock

7-8RS St. LawrenceHanson Aggregates New York Inc.

Ogdensburg, NYDolomite - 18AR 49S 2.737 2.707 2.791 1.1 NY3 44.6813 -75.5080

Region 07

Crushed Bedrock

7-8RS1 St. LawrenceHanson Aggregates New York Inc.

Ogdensburg, NYDolomite - 19AR051S 2.758 2.724 2.820 1.3 Not for Portland Cement Concrete; 44.6813 -75.5080

Region 07

Crushed Bedrock

7-9RS LewisBarrett Paving Materials Inc.

Boonville, NY (Black River Granite Quarry)Granite - 19AR027S 2.659 2.648 2.678 0.4 NY1 43.5275 -75.3145

Region 07

Crushed Bedrock

7-19R FranklinUpstone Materials, Inc.

West Bangor, NY (Malone Quarry)Granite - 18AR 41 2.644 2.627 2.672 0.6 NY1 44.7687 -74.4610

Region 07

Crushed Bedrock

7-20R JeffersonHanson Aggregates New York Inc.

Great Bend, NYLimestone - 18AR 79 2.683 2.670 2.705 0.5 NY4 43.9994 -75.6919

Region 07

Crushed Bedrock

7-21RS JeffersonBarrett Paving Materials Inc.

Pamelia Center, NYLimestone - 19AR58S 2.715 2.704 2.735 0.4 NY4 Not for Portland Cement Concrete; 44.0547 -75.8982

Region 07

Crushed Bedrock

7-22R JeffersonRural Hill Sand & Gravel Corp.

Rural Hill, NYLimestone - 19AR044 2.646 2.623 2.683 0.9 NY4 43.8125 -76.1742

Region 07

Crushed Bedrock

7-28R LewisV.S. Virkler & Son, Inc.

Martinsburg, NYLimestone - 19AR045 2.704 2.701 2.707 0.1 NY4 43.7433 -75.4354

Region 07

Crushed Bedrock

7-31R St. LawrenceJ.E. Sheehan Contracting Corp.

Winthrop, NY (Catamount Quarry)Dolomite - 18AR 40 2.790 2.776 2.816 0.5 NY3 44.7999 -74.8350

Region 07

Crushed Bedrock

7-34R LewisV.S. Virkler & Son, Inc.

West Lowville, NYLimestone - 19AR046 2.729 2.727 2.732 0.1 NY3 43.8103 -75.5391

Region 07

Crushed Bedrock

7-35R ClintonWood Falls Industries

Mooers, NYSandstone - 19AR039 2.617 2.604 2.637 0.5 44.9149 -73.6366

Region 07

Crushed Bedrock

7-36R JeffersonKing's QuarryRodman, NY

Limestone - 19AR047 2.799 2.778 2.838 0.8 NY4 43.8569 -75.9585

Region 07

Crushed Bedrock

7-37R JeffersonGraRok, LLC

Champion, NYLimestone - 19AR095 2.668 2.659 2.683 0.4 NY3 44.0050 -75.6955

Region 07

Crushed Bedrock

7-38R ClintonWilli Kalvaitis

West Chazy, NYLimestone - 18AR 44 2.734 2.728 2.745 0.2 NY2 44.8606 -73.4562

Region 07

Crushed Bedrock

7-39R LewisMJL Crushing LLC

Lowville, NYLimestone - 19AR048 2.688 2.686 2.693 0.1 NY4 43.8091 -75.5086

Region 07

Crushed Bedrock

7-41RS LewisBarrett Paving Materials Inc.

Port Leyden, NYLimestone - 18AR 39S 2.705 2.695 2.721 0.4 NY3 43.5893 -75.3562

Region 07

Crushed Bedrock

7-42R ClintonRafferty Sand & Gravel, LLC

Chazy, NYLimestone - 19AR040 2.646 2.624 2.684 0.8 NY4 44.8664 -73.4614

Page 23 of 38 3/2/2020

Page 27: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 07

Screened Gravel

7-6G JeffersonWatertown Sand & Gravel, Inc.

Watertown, NY- 10 18AG 10 2.669 2.647 2.705 0.8 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

43.9545 -75.8677

Region 07

Crushed Gravel

7-63G St. LawrenceParishville Sand & Gravel

Parishville, NY- 60 18AG 46C 2.649 2.620 2.699 1.1 - 44.6054 -74.7989

Region 07

Crushed Gravel

7-67G JeffersonCooke Sand & Gravel Inc.

Spragueville, NY- 60 18AG 14C 2.679 2.650 2.730 1.1 - 44.2592 -75.5314

Region 07

Crushed Gravel

7-76G JeffersonBach & Co., Inc.

Clayton, NY (Pelo Road Pit)- 95 19AG022C 2.634 2.617 2.663 0.7 - 44.2042 -76.1539

Page 24 of 38 3/2/2020

Page 28: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 07

Natural Sand 7-3F ClintonUpstone Materials, Inc.

Morrisonville, NY- - 19AF045 2.634 2.618 2.661 0.6 - 44.6791 -73.5446

Region 07

Natural Sand 7-5F JeffersonRural Hill Sand & Gravel Corp.

Ellisburg, NY- - 19AF063 2.661 2.645 2.688 0.6 - 43.7956 -76.1648

Region 07

Natural Sand 7-6F JeffersonWatertown Sand & Gravel, Inc.

Watertown, NY- - 18AF 40 2.644 2.618 2.688 1.0 - 43.9545 -75.8677

Region 07

Manufactured Sand

7-9RSFM LewisBarrett Paving Materials Inc.

Boonville, NY (Black River Granite Quarry)- - 19AF034 2.672 2.664 2.686 0.3 - Fine aggregate produced from 7-9RS 43.5275 -75.3145

Region 07

Natural Sand 7-14F St. LawrenceUpstone Materials, Inc.

South Colton, NY (Cold Brook Bank)- - 19AF078 2.651 2.642 2.666 0.3 - 44.4440 -74.8098

Region 07

Manufactured Sand

7-19RFM FranklinUpstone Materials, Inc.

West Bangor, NY (Malone Quarry)- - 18AF 55 2.691 2.684 2.703 0.3 - Fine aggregate produced from 7-19R. 44.7687 -74.4610

Region 07

Natural Sand 7-24F ClintonR Deso Inc.

Mooers Forks, NY- - 18AF 70 2.622 2.607 2.647 0.6 - 44.9493 -73.6648

Region 07

Manufactured Sand

7-36RFM JeffersonKing's QuarryRodman, NY

- - 19AF064 2.688 2.675 2.711 0.5 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 7-36R. 43.8569 -75.9585

Region 07

Natural Sand 7-58F LewisV.S. Virkler & Son, Inc.

Watson, NY- - 19AF006 2.671 2.664 2.683 0.3 - 43.8008 -75.3931

Region 07

Natural Sand 7-63F1 St. LawrenceParishville Sand & Gravel

Parishville, NY- - 18AF 143 2.634 2.616 2.664 0.7 - Not for Portland Cement Concrete; Middle Unit. 44.6213 -74.8315

Region 07

Natural Sand 7-67F JeffersonCooke Sand & Gravel Inc.

Spragueville, NY- - 18AF 56 2.660 2.644 2.686 0.6 - 44.2592 -75.5314

Region 07

Natural Sand 7-69F St. LawrenceJ.E. Sheehan Contracting Corp.

Southville, NY- - 18AF 57 2.632 2.621 2.650 0.4 - Not for Portland Cement Concrete; 44.6692 -74.8491

Region 07

Natural Sand 7-71F St. LawrenceStout's Sand & Gravel

Brier Hill, NY- - 19AF050 2.703 2.681 2.740 0.8 - 44.5112 -75.6848

Region 07

Natural Sand 7-73F JeffersonCranesville Aggregates Co. Inc.

West Carthage, NY- - 17AF 12 2.657 2.635 2.693 0.8 - 44.0025 -75.6646

Region 07

Natural Sand 7-75F JeffersonJohnson's Sand & Gravel Inc.

Plessis, NY- - 18AF 35 2.644 2.626 2.675 0.7 - 44.2461 -75.9547

Region 07

Manufactured Sand

7-76GFM JeffersonBach & Co., Inc.

Clayton, NY (Pelo Road Pit)- - 19AF053 2.651 2.629 2.689 0.8 - Fine aggregate produced from 7-76G. 44.2042 -76.1539

Region 07

Natural Sand 7-77F JeffersonBach & Co., Inc.

Clayton, NY (NYS Route 12E Pit)- - 18AF 58 2.611 2.584 2.655 1.0 - Not for Portland Cement Concrete; 44.2061 -76.1427

Region 07

Natural Sand 7-82F ClintonUpstone Materials, Inc.

Au Sable, NY (Au Sable Forks Bank)- - 17AF 13 2.681 2.671 2.698 0.4 - 44.4619 -73.6439

Region 07

Natural Sand 7-88F ClintonUpstone Materials, Inc.

Clintonville, NY (Miller Bank)- - 18AF 69 2.726 2.714 2.747 0.4 - 44.4721 -73.6015

Region 07

Natural Sand 7-89F ClintonWood Falls Industries

AuSable, NY (Dry Bridge Road Sand Pit)- - 19AF051 2.680 2.665 2.705 0.6 - Not for Portland Cement Concrete; 44.4654 -73.6187

Region 07

Natural Sand 7-90F ClintonRafferty Sand & Gravel LLC

Morrisonville, NY (White's Sand Pit)- - 18AF168 2.626 2.613 2.648 0.5 - 44.6747 -73.5405

Region 07

Natural Sand 7-91F JeffersonGraRok, LLC

Champion, NY- - 19AF017 2.661 2.637 2.700 0.9 - Not for Portland Cement Concrete wearing surfaces; 44.0053 -75.6958

Page 25 of 38 3/2/2020

Page 29: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 08

Crushed Bedrock

8-3R DutchessPeckham Materials Corp.

Pleasant Valley, NYDolomite - 19AR102 2.872 2.868 2.880 0.2 NY2 41.7667 -73.8120

Region 08

Crushed Bedrock

8-5R OrangeTilcon New York, Inc.

Goshen, NYDolomite - 19AR064 2.824 2.816 2.839 0.3 NY2 41.3580 -74.3605

Region 08

Crushed Bedrock

8-8R RocklandTilcon New York, Inc.

West Nyack, NYTrap Rock - 18AR 75 2.914 2.879 2.985 1.2 NY1 41.1054 -73.9620

Region 08

Crushed Bedrock

8-9R DutchessTilcon New York, Inc.

Clinton Point, NYDolomite - 18AR 73 2.816 2.806 2.834 0.4 NY2 41.6211 -73.9475

Region 08

Crushed Bedrock

8-10R RocklandTilcon New York Inc.

Haverstraw, NYTrap Rock - 19AR077 2.943 2.922 2.985 0.7 NY1 41.1784 -73.9547

Region 08

Crushed Bedrock

8-11R RocklandTilcon New York Inc.

Stony Point, NY (Tomkins Cove Quarry)Dolomite - 18AR 54 2.819 2.805 2.845 0.5 NY2 41.2476 -73.9823

Region 08

Crushed Bedrock

8-15RS UlsterCallanan Industries Inc.

East Kingston, NYLimestone - 19AR067S 2.705 2.688 2.734 0.6 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 41.9571 -73.9729

Region 08

Crushed Bedrock

8-17R ColumbiaA. Colarusso & Son, Inc.

Hudson, NYLimestone - 18AR 76 2.691 2.676 2.718 0.6 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

High A.I.R. limestone. 42.2383 -73.7699

Region 08

Crushed Bedrock

8-17RS ColumbiaA. Colarusso & Son, Inc.

Hudson, NYLimestone - 19AR078S 2.700 2.688 2.721 0.4 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.2383 -73.7699

Region 08

Crushed Bedrock

8-18R Out of StateTilcon Connecticut Inc.

North Branford, CTTrap Rock - 18AR 52 2.888 2.830 3.004 2.0 NY1 41.3359 -72.7892

Region 08

Crushed Bedrock

8-19R Out of StateTilcon Connecticut Inc.

Wallingford, CTTrap Rock - 18AR 53 2.938 2.916 2.982 0.8 NY1 41.4676 -72.7264

Region 08

Crushed Bedrock

8-21R Out of StateJohn S. Lane & Son, Inc.

Westfield, MATrap Rock - 19AR026 2.883 2.854 2.939 1.0 NY1 42.1194 -72.6956

Region 08

Crushed Bedrock

8-24R Out of StateBraen Stone Industries, Inc.

Haledon, NJTrap Rock - 19AR065 2.954 2.927 3.008 0.9 NY1 40.9381 -74.1934

Region 08

Crushed Bedrock

8-33R Out of StateTilcon Connecticut Inc.

Plainville, CTTrap Rock - 18AR 46 2.964 2.932 3.031 1.1 NY1 41.6663 -72.8319

Region 08

Crushed Bedrock

8-36R Out of StateWeldon Materials Inc.

Hopatcong, NJGranite - 19AR011 2.690 2.668 2.728 0.8 NY1 40.9907 -74.6160

Region 08

Crushed Bedrock

8-44R Out of StateBraen Stone Industries, Inc.

Sparta, NJGranite - 19AR010 2.868 2.855 2.894 0.5 NY1 41.0567 -74.6779

Region 08

Crushed Bedrock

8-46R Out of StateCentury Aggregates Inc.

Falls Village, CTMarble - 19AR084 2.894 2.884 2.913 0.4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

41.9836 -73.3566

Region 08

Crushed Bedrock

8-48R Out of StateEastern Concrete Materials, Inc.

Hamburg, NJGranite - 19AR035 2.641 2.625 2.668 0.6 NY1 41.1672 -74.5792

Region 08

Crushed Bedrock

8-49R DutchessWingdale Materials LLC

Wingdale, NYGranite - 18AR 57 2.801 2.779 2.843 0.8 NY1 41.6364 -73.6085

Region 08

Crushed Bedrock

8-50R Out of StateTilcon New York, Inc.

Riverdale, NJGranite - 19AR059 2.684 2.668 2.711 0.6 NY1 40.9966 -74.3138

Region 08

Crushed Bedrock

8-51R OrangeSpeyside QuarryWoodbury, NY

Graywacke - 19AR016 2.725 2.711 2.750 0.5 41.3706 -74.1066

Region 08

Crushed Bedrock

8-54R DutchessThalle Industries, Inc.

Fishkill, NYGranite - 19AR007 2.725 2.710 2.750 0.5 NY1 41.5012 -73.8998

Region 08

Crushed Bedrock

8-57R Out of StateTilcon New York, Inc.Pompton Lakes, NJ

Granite - 19AR060 2.773 2.758 2.801 0.6 NY1 41.0073 -74.3088

Region 08

Crushed Bedrock

8-63R Out of StateVan Orden Sand & Gravel

Ringwood, NJGranite - 19AR042 2.763 2.749 2.787 0.5 NY1 41.0777 -74.3250

Region 08

Crushed Bedrock

8-65RS OrangeCallahan & Nannini Quarry, Inc.

Salisbury Mills, NY (Clove Rd. Quarry)Dolomite - 19AR017S 2.817 2.806 2.838 0.4 NY2 41.4049 -74.1358

Region 08

Crushed Bedrock

8-65RS1 OrangeCallahan & Nannini Quarry, Inc.

Salisbury Mills, NY (Clove Rd. Quarry)Granite - 18AR 5S 2.608 2.581 2.653 1.1 NY3 41.4049 -74.1358

Page 26 of 38 3/2/2020

Page 30: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 08

Crushed Bedrock

8-68R Out of StateGalasso Materials, LLC

East Granby, CTTrap Rock - 18AR 47 2.888 2.847 2.969 1.4 NY1 41.9362 -72.7414

Region 08

Crushed Bedrock

8-76RS Out of StateStavola Construction Materials, Inc.Lafayette, NJ (Beaver Run Quarry)

Dolomite - 18AR 34S 2.820 2.809 2.841 0.4 41.1566 -74.6275

Region 08

Crushed Bedrock

8-77R OrangeE. Tetz & Sons, Inc.

Chester, NYArgillite - 19AR009 2.743 2.723 2.780 0.8 41.3440 -74.3039

Region 08

Crushed Bedrock

8-78R PutnamLiberty Bell Trucking Co., Inc.

Carmel, NY (Old Route 6 Quarry)Granite - 18AR 72 2.623 2.601 2.660 0.9 NY3 41.4161 -73.6666

Region 08

Crushed Bedrock

8-79R PutnamZimmer Road Development Corp.

Brewster, NYGranite - 18AR 19 2.700 2.679 2.738 0.8 41.4410 -73.6274

Region 08

Crushed Bedrock

8-96R Out of StateEastern Concrete Materials, Inc.

Wantage, NJDolomite - 19AR043 2.811 2.795 2.840 0.6 NY2 41.1689 -74.5868

Page 27 of 38 3/2/2020

Page 31: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 08

Screened Gravel

8-57G DutchessHarlem Valley Materials Inc.

Wassaic, NY- 45 17AG 49 2.683 2.643 2.752 1.5 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

41.7904 -73.5380

Region 08

Crushed Gravel

8-145G Out of StateJohn S. Lane & Son, Inc.

Westfield, MA- 95 19AG027C 2.655 2.634 2.692 0.8 - 42.1522 -72.8057

Region 08

Crushed Gravel

8-168G DutchessWest Hook Sand & Gravel, Inc.

Fishkill, NY- 60 18AG 34C 2.683 2.652 2.738 1.2 - 41.5198 -73.8562

Region 08

Crushed Gravel

8-186G UlsterMombaccus Excavating Inc.Kerhonkson, NY (Mine #1)

- 100 19AG052C 2.687 2.641 2.770 1.8 - 41.8075 -74.2999

Page 28 of 38 3/2/2020

Page 32: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 08

Manufactured Sand

8-3RFM DutchessPeckham Materials Corp.

Pleasant Valley, NY- - 19AF161 2.770 2.758 2.792 0.4 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-3R. 41.7667 -73.8120

Region 08

Manufactured Sand

8-5RFM OrangeTilcon New York, Inc.

Goshen, NY- - 19AF088 2.809 2.803 2.820 0.2 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-5R. 41.3580 -74.3605

Region 08

Manufactured Sand

8-8RFM RocklandTilcon New York, Inc.

West Nyack, NY- - 18AF113 2.856 2.815 2.934 1.4 - Fine aggregate produced from 8-8R. 41.1054 -73.9620

Region 08

Manufactured Sand

8-9RFM DutchessTilcon New York, Inc.

Clinton Point, NY- - 18AF130 2.814 2.805 2.830 0.3 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-9R. 41.6211 -73.9475

Region 08

Manufactured Sand

8-10RFM RocklandTilcon New York Inc.

Haverstraw, NY- - 19AF118 2.885 2.850 2.954 1.2 - Fine aggregate produced from 8-10R. 41.1784 -73.9547

Region 08

Manufactured Sand

8-11RFM RocklandTilcon New York Inc.

Stony Point, NY (Tomkins Cove Quarry)- - 18AF 93 2.784 2.759 2.829 0.9 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-11R. 41.2476 -73.9823

Region 08

Manufactured Sand

8-15RSFM UlsterCallanan Industries Inc.

East Kingston, NY- - 19AF090 2.660 2.630 2.711 1.1 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 8-15RS. 41.9571 -73.9729

Region 08

Manufactured Sand

8-17RFM ColumbiaA. Colarusso & Son, Inc.

Hudson, NY- - 19AF121 2.654 2.624 2.706 1.2 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Fine aggregate produced from 8-17R. 42.2383 -73.7699

Region 08

Manufactured Sand

8-18RFM Out of StateTilcon Connecticut Inc.

North Branford, CT- - 18AF 88 2.895 2.848 2.988 1.6 - Fine aggregate produced from 8-18R. 41.3359 -72.7892

Region 08

Manufactured Sand

8-21RFM Out of StateJohn S Lane & Son, Inc.

Westfield, MA- - 18AF 145 2.868 2.824 2.956 1.6 - 42.1177 -72.6948

Region 08

Manufactured Sand

8-36RFM Out of StateWeldon Materials Inc.

Hopatcong, NJ- - 19AF015 2.680 2.658 2.717 0.8 - Fine aggregate produced from 8-36R. 40.9907 -74.6160

Region 08

Manufactured Sand

8-37RFM PutnamPutnam Materials Corp.

Patterson, NY- - 18AF 86 2.854 2.852 2.858 0.1 - Not for Portland Cement Concrete; Fine aggregate produced from 8-37R. 41.5189 -73.6051

Region 08

Manufactured Sand

8-44RFM Out of StateBraen Stone Industries, Inc.

Sparta, NJ- - 19AF016 2.786 2.764 2.824 0.8 - Fine aggregate produced from 8-44R. 41.0567 -74.6779

Region 08

Manufactured Sand

8-46RFM Out of StateCentury Aggregates Inc.

Falls Village, CT- - 19AF129 2.902 2.900 2.905 0.1 - Not for Portland Cement Concrete; Fine aggregate manufactured from 8-46R. 41.9836 -73.3566

Region 08

Manufactured Sand

8-48RFM Out of StateEastern Concrete Materials, Inc.

Hamburg, NJ- - 19AF047 2.641 2.630 2.660 0.4 - Fine aggregate produced from 8-48R. 41.1672 -74.5792

Region 08

Natural Sand 8-49F DutchessCentury Aggregates

Fishkill, NY- - 18AF 87 2.668 2.637 2.721 1.2 - 41.4956 -73.9029

Region 08

Manufactured Sand

8-49RFM DutchessWingdale Materials LLC

Wingdale, NY- - 18AF100 2.870 2.862 2.887 0.3 - Fine aggregate produced from 8-49R. 41.6364 -73.6085

Region 08

Manufactured Sand

8-50RFM Out of StateTilcon New York, Inc.

Riverdale, NJ- - 19AF075 2.665 2.651 2.689 0.5 - Fine aggregate produced from 8-50R. 40.9966 -74.3138

Region 08

Manufactured Sand

8-51RFM OrangeSpeyside QuarryWoodbury, NY

- - 19AF024 2.698 2.674 2.742 0.9 - Fine aggregate produced from 8-51R. 41.3706 -74.1066

Region 08

Manufactured Sand

8-54RFM DutchessThalle Industries, Inc.

Fishkill, NY- - 19AF012 2.746 2.731 2.772 0.5 - Fine aggregate produced from 8-54R. 41.5012 -73.8998

Region 08

Natural Sand 8-57F DutchessHarlem Valley Materials Inc.

Wassaic, NY- - 19AF068 2.668 2.626 2.741 1.6 - 41.7904 -73.5380

Region 08

Manufactured Sand

8-63RFM Out of StateVan Orden Sand & Gravel

Ringwood, NJ- - 19AF055 2.734 2.721 2.757 0.5 - Fine aggregate produced from 8-63R. 41.0777 -74.3250

Region 08

Manufactured Sand

8-65RS1FM

OrangeCallahan & Nannini Quarry, Inc.

Salisbury Mills, NY (Clove Rd. Quarry)- - 19AF076 2.636 2.609 2.681 1.0 - Fine aggregate produced from 8-65RS1. 41.4049 -74.1358

Region 08

Manufactured Sand

8-65RSFM OrangeCallahan & Nannini Quarry, Inc.

Salisbury Mills, NY (Clove Rd. Quarry)- - 19AF077 2.734 2.703 2.788 1.1 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-65RS. 41.4049 -74.1358

Region 08

Manufactured Sand

8-69RFM Out of StateO&G Industries, Inc.

New Milford, CT (Quarry #5)- - 19AF025 2.843 2.835 2.857 0.3 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-69R. 41.6001 -73.4494

Region 08

Manufactured Sand

8-70RFM Out of StateBraen Aggregates LLC

Franklin, NJ- - 18AF 75 2.750 2.746 2.757 0.1 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-70R. 41.0931 -74.6008

Page 29 of 38 3/2/2020

Page 33: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 08

Manufactured Sand

8-76RSFM Out of StateStavola Construction Materials, Inc.Lafayette, NJ (Beaver Run Quarry)

- - 18AF 49 2.801 2.788 2.826 0.5 - Not for Portland Cement Concrete wearing surfaces; 41.1566 -74.6275

Region 08

Natural Sand 8-80F ColumbiaColarusso Sand & Gravel

Hudson, NY (Kearney Mine)- - 19AF069 2.615 2.563 2.704 2.0 - Not for Portland Cement Concrete; 42.2014 -73.7962

Region 08

Natural Sand 8-80F1 ColumbiaColarusso Sand & Gravel

Hudson, NY (Kearney Mine)- - 19AF181 2.662 2.631 2.716 1.2 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Blend of 8-80F and 8-17R. Static stockpile approval only.

42.2014 -73.7962

Region 08

Manufactured Sand

8-96RFM Out of StateEastern Concrete Materials, Inc

Wantage, NJ- - 19AF056 2.784 2.762 2.824 0.8 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 8-96R. 41.1689 -74.5868

Region 08

Natural Sand 8-145F Out of StateJohn S. Lane & Son, Inc.

Westfield, MA- - 19AF080 2.746 2.729 2.776 0.6 - 42.1522 -72.8057

Region 08

Natural Sand 8-145F1 Out of StateJohn S. Lane & Son, Inc.

Westfield, MA (Pochassic Pit)- - 19AF079 2.776 2.753 2.818 0.8 - 42.1535 -72.8028

Region 08

Natural Sand 8-153F1 DutchessRed Wing Properties Inc.Milan, NY (Roe-Jan Plant)

- - 19AF150 2.596 2.541 2.689 2.2 - Material from below water table. 42.1257 -73.7915

Region 08

Natural Sand 8-154F DutchessRoute 82 Sand & Gravel Inc.

Hibernia, NY- - 18AF 160 2.646 2.606 2.713 1.5 - 41.8091 -73.7474

Region 08

Natural Sand 8-162F OrangeC.M. & Son Trucking, Inc.

Wallkill, NY- - 18AF129 2.615 2.576 2.680 1.5 - 41.5376 -74.4258

Region 08

Natural Sand 8-168F DutchessWest Hook Sand & Gravel, Inc.

Fishkill, NY- - 18AF104 2.650 2.621 2.699 1.1 - 41.5198 -73.8562

Region 08

Natural Sand 8-181F Out of State284 Aggregates, LLC

Sussex, NJ- - 19AF155 2.623 2.567 2.720 2.2 - 41.2133 -74.5959

Region 08

Natural Sand 8-183F Out of StateBelvidere Sand & Gravel

Belvidere, NJ- - 19AF011 2.640 2.598 2.711 1.6 - 40.8306 -75.0381

Region 08

Natural Sand 8-185F Out of StateCentury Acquisitions

Sheffield, MA- - 18AF 99 2.674 2.660 2.697 0.5 - 42.0503 -73.3219

Region 08

Natural Sand 8-186F UlsterMombaccus Excavating, Inc.Kerhonkson, NY (Mine #1)

- - 18AF 94 2.637 2.581 2.735 2.2 - Not for Portland Cement Concrete; 41.8075 -74.2999

Region 08

Natural Sand 8-189F UlsterEllenville Sand & Gravel

Ellenville, NY- - 19AF067 2.637 2.616 2.673 0.8 - 41.7253 -74.3961

Region 08

Natural Sand 8-190F Out of StateNorth Church Gravel, Inc.

Franklin, NJ- - 19AF054 2.653 2.612 2.722 1.5 - 41.1338 -74.5966

Region 08

Natural Sand 8-191F Out of StateDiamond Sand & Gravel, Inc.

Sparta, NJ- - 19AF060 2.646 2.608 2.711 1.5 - 41.0922 -74.6405

Page 30 of 38 3/2/2020

Page 34: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 09

Crushed Bedrock

9-6R SchoharieCobleskill Stone Products Inc.

Schoharie, NYLimestone - 19AR013 2.694 2.681 2.718 0.5 NY4 Not for Portland Cement Concrete; 42.6676 -74.2995

Region 09

Crushed Bedrock

9-10R DelawareCobleskill Stone Products Inc.

Hancock, NYGraywacke - 19AR066 2.905 2.863 2.990 1.5 Not for Portland Cement Concrete; 41.9493 -75.2410

Region 09

Crushed Bedrock

9-18R Out of StatePennsy Supply, Inc.

Annville, PA (Millard Quarry)Limestone & Dolomite

- 18AR 6 2.788 2.774 2.813 0.5 NY4 40.3267 -76.5702

Region 09

Crushed Bedrock

9-19R Out of StateNew Enterprise Stone & Lime Co., Inc.

Schoeneck , PADolomite & Limestone

- 18AR 7 2.774 2.760 2.800 0.5 NY4 40.2367 -76.1823

Region 09

Crushed Bedrock

9-30R Out of StateMartin Stone Quarries, Inc.

Bechtelsville, PAGranite - 18AR 8 2.745 2.725 2.780 0.7 NY1 40.3598 -75.6310

Region 09

Crushed Bedrock

9-31R Out of StateBedrock Quarries Inc.West Damascus, PA

Graywacke - 19AR062 2.651 2.625 2.695 1.0 41.6956 -75.1839

Region 09

Crushed Bedrock

9-36R Out of StateABE Materials

Easton, PADolomite & Limestone

- 18AR 9 2.768 2.753 2.796 0.6 NY4 40.7660 -75.1872

Region 09

Crushed Bedrock

9-37R SullivanCallanan Industries Inc.

Bridgeville, NYGraywacke - 19AR056 2.694 2.680 2.719 0.5 41.6263 -74.6177

Region 09

Crushed Bedrock

9-38R SullivanJML Quarries, Inc.

Wurtsboro, NY (Mastens Lake Quarry)Graywacke - 19AR057 2.708 2.688 2.745 0.8 41.6227 -74.5127

Region 09

Crushed Bedrock

9-39R SchoharieCarver Sand & Gravel LLC

Middleburgh, NYLimestone - 19AR015 2.694 2.680 2.717 0.5 NY4 X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.6358 -74.3158

Region 09

Crushed Bedrock

9-48R SchoharieCobleskill Stone Products Inc.

Howes Cave, NYLimestone - 19AR014 2.704 2.695 2.719 0.3 NY4 42.6914 -74.3845

Region 09

Crushed Bedrock

9-49R Out of StateBirdsboro Materials

Bidrsboro, PATrap Rock - 18AR 10 2.990 2.970 3.031 0.7 NY1 40.2488 -75.8166

Region 09

Crushed Bedrock

9-59R Out of StateNew Enterprise Stone & Lime Co. Inc.

Ephrata, PADolomite & Limestone

- 18AR 12 2.802 2.792 2.819 0.3 40.1575 -76.0976

Region 09

Crushed Bedrock

9-60R Out of StatePottsville Materials LLC

Pottsville, PAGraywacke - 18AR 13 2.658 2.639 2.690 0.7 40.7275 -76.2117

Region 09

Crushed Bedrock

9-68R Out of StateQuarry Management Holdings, LLCLackawaxen, PA (Holbert Quarry)

Graywacke - 18AR 36 2.682 2.652 2.734 1.1 41.4993 -74.9907

Region 09

Crushed Bedrock

9-69R Out of StateDyer Quarry, Inc.

Birdsboro, PATrap Rock - 18AR 14 2.787 2.770 2.818 0.6 NY1 40.2734 -75.8476

Region 09

Crushed Bedrock

10-35R Out of StateHanson AggregatesDowningtown, PA

Dolomite & Limestone

- 18AR 15 2.756 2.740 2.784 0.6 NY4 Assigned to Region 9. 40.0107 -75.6694

Region 09

Crushed Bedrock

10-36R Out of StateNew Enterprise Stone & Lime Co. Inc.Kutztown, PA (Eastern Industries, Inc.

facility)Dolomite - 18AR 16 2.812 2.798 2.838 0.5 NY2 Assigned to Region 9. 40.5152 -75.7295

Region 09

Crushed Bedrock

10-37R Out of StateNew Enterprise Stone & Lime Co. Inc.

Coplay, PADolomite & Limestone

- 18AR 17 2.769 2.759 2.788 0.4 NY4 Assigned to Region 9. 40.6676 -75.5478

Page 31 of 38 3/2/2020

Page 35: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 09

Crushed Gravel

6-11G TiogaF.S. Lopke Contracting Inc.

Owego, NY- 60 19AG010C 2.640 2.603 2.702 1.4 - Assigned to Region 9. 42.0924 -76.2880

Region 09

Crushed Gravel

6-13G TiogaF.S. Lopke Contracting, Inc.

Nichols, NY (Nichols-Barrett Mine)- 60 18AG 22C 2.643 2.607 2.706 1.4 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Assigned to Region 9. 42.0700 -76.3260

Region 09

Crushed Gravel

6-38G TiogaF.S. Lopke Contracting Inc.

Tioga Center, NY- 70 18AG 20C 2.601 2.552 2.685 2.0 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Assigned to Region 9. 42.0463 -76.3515

Region 09

Crushed Gravel

6-69G TiogaBarney & Dickenson, Inc.

Owego, NY (Blodgett Rd. Pit)- 80 17AG 31C 2.635 2.591 2.710 1.7 - Assigned to Region 9. 42.1743 -76.2472

Region 09

Crushed Gravel

6-72G TiogaF.S. Lopke Contracting, Inc.

Nichols, NY (Buck-Wheeler-Day Mine)- 65 18AG 23C 2.599 2.560 2.665 1.6 - Assigned to Region 9. 42.0676 -76.3176

Region 09

Crushed Gravel

6-76G TiogaBarney & Dickenson, Inc.Owego, NY (Truman Pit)

- 70 19AG009C 2.643 2.607 2.705 1.4 - XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;Assigned to Region 9. 42.1608 -76.2565

Region 09

Crushed Gravel

9-43G1 ChenangoTri City Highway Products, Inc.

Greene, NY (Brisben Pit)- 65 19AG051C 2.609 2.581 2.654 1.1 - Northeast pit. 42.3551 -75.6813

Region 09

Screened Gravel

9-67G SullivanE. Tetz & Sons Inc.Mamakating, NY

- 75 19AG025 2.594 2.579 2.619 0.6 -Not approved for use in Portland cement concrete or bituminous

concrete.41.6230 -74.4474

Region 09

Crushed Gravel

9-92G Out of StateAustin Excavating & Paving, Inc.Sayre, PA (Atchison S&G Mine)

- 65 18AG 18C 2.628 2.590 2.693 1.5 - 41.9980 -76.4850

Page 32 of 38 3/2/2020

Page 36: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 09

Natural Sand 6-11F TiogaF.S. Lopke Contracting Inc.

Owego, NY- - 19AF019 2.633 2.593 2.700 1.5 -

Material from below water table. Assigned to Region 9.

42.0924 -76.2880

Region 09

Natural Sand 6-13F TiogaF.S. Lopke Contracting Inc.

Nichols, NY (Nichols-Barrett Mine)- - 18AF 77 2.630 2.590 2.698 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Assigned to Region 9. 42.0700 -76.3260

Region 09

Natural Sand 6-38F TiogaF.S. Lopke Contracting Inc.

Tioga Center, NY- - 18AF 74 2.611 2.570 2.680 1.6 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Assigned to Region 9. 42.0463 -76.3515

Region 09

Natural Sand 6-69F TiogaBarney & Dickenson, Inc.

Owego, NY (Blodgett Rd. Pit)- - 17AF 85 2.627 2.579 2.709 1.9 - Assigned to Region 9. 42.1743 -76.2472

Region 09

Natural Sand 6-72F TiogaF.S. Lopke Contracting, Inc.

Nichols, NY (Buck-Wheeler-Day Mine)- - 18AF 78 2.627 2.593 2.685 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Material from below water table. Assigned to Region 9.

42.0676 -76.3176

Region 09

Natural Sand 6-76F TiogaBarney & Dickenson, Inc.Owego, NY (Truman Pit)

- - 19AF018 2.637 2.599 2.703 1.5 - XPotential for alkali-silica reactivity in Portland cement concrete.

To mitigate, use <0.7% alkali cement or pozzolans;Assigned to Region 9. 42.1608 -76.2565

Region 09

Natural Sand 9-2F SullivanJML Quarries, Inc.

Wurtsboro, NY (Mastens Lake Pit)- - 19AF070 2.629 2.604 2.671 1.0 - 41.6185 -74.5127

Region 09

Manufactured Sand

9-6RFM SchoharieCobleskill Stone Products Inc.

Schoharie, NY- - 19AF021 2.612 2.557 2.707 2.2 - Not for Portland Cement Concrete;

Fine aggregate produced from 9-6R. Not for use in Portland cement concrete.

42.6676 -74.2995

Region 09

Natural Sand 9-10F OtsegoSeward Sand & Gravel, Inc.

Oneonta, NY- - 19AF020 2.626 2.573 2.717 2.1 - Not for Portland Cement Concrete; 42.4774 -74.9783

Region 09

Manufactured Sand

9-10RFM DelawareCobleskill Stone Products Inc.

Hancock, NY- - 19AF089 2.668 2.641 2.715 1.0 - Not for Portland Cement Concrete; Fine aggregate produced from 9-10R. 41.9493 -75.2410

Region 09

Natural Sand 9-15F2 ChenangoChenango Asphalt Products

Sherburne, NY (Cook Lease Area)- - 19AF084 2.632 2.592 2.700 1.5 - Not for Portland Cement Concrete; 42.6363 -75.5320

Region 09

Manufactured Sand

9-18RFM Out of StatePennsy Supply, Inc.

Annville, PA (Millard Quarry)- - 18AF 8 2.707 2.657 2.797 1.9 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 9-18R. 40.3267 -76.5702

Region 09

Manufactured Sand

9-19RFM Out of StateNew Enterprise Stone & Lime Co., Inc.

Schoeneck, PA- - 18AF 9 2.734 2.705 2.785 1.1 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 9-19R. 40.2367 -76.1823

Region 09

Manufactured Sand

9-20RFMW

Out of StateNew Enterprise Stone & Lime Co., Inc.

Honey Brook, PA- - 18AF 10 2.619 2.598 2.654 0.8 -

703-05, Fine Aggregate for White Portland Cement Concrete. Fine aggregate produced from 9-20R.

40.1248 -75.9002

Region 09

Manufactured Sand

9-21RFM SullivanE. Tetz & Sons, Inc.

Mongaup Valley, NY- - 19AF104 2.765 2.735 2.821 1.1 - Not for Portland Cement Concrete; Fine aggregate produced from 9-21R. 41.6630 -74.7731

Region 09

Natural Sand 9-22F4 ChenangoE&R Pope's Excavating, LLC

Guilford, NY (NYS Route 8 Pit)- - 18AF 84 2.622 2.575 2.701 1.8 - Not for Portland Cement Concrete; 42.4388 -75.3931

Region 09

Manufactured Sand

9-30RFM Out of StateMartin Stone Quarries, Inc.

Bechtelsville, PA- - 18AF 11 2.728 2.691 2.794 1.4 - Fine aggregate produced from 9-30R. 40.3598 -75.6310

Region 09

Manufactured Sand

9-31RFM Out of StateBedrock Quarries Inc.West Damascus, PA

- - 19AF081 2.674 2.653 2.709 0.8 - Not for Portland Cement Concrete; Fine aggregate produced from 9-31R. 41.6956 -75.1839

Region 09

Manufactured Sand

9-36RFM Out of StateABE Materials

Easton, PA- - 18AF 12 2.690 2.637 2.783 2.0 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 9-36R. 40.7660 -75.1872

Region 09

Manufactured Sand

9-37RFM SullivanCallanan Industries Inc.

Bridgeville, NY- - 19AF071 2.682 2.665 2.712 0.6 - Fine aggregate produced from 9-37R. 41.6263 -74.6177

Region 09

Manufactured Sand

9-38RFM SullivanJML Quarries Inc.

Wurtsboro, NY (Mastens Lake Quarry)- - 19AF072 2.681 2.663 2.712 0.7 - Fine aggregate produced from 9-38R. 41.6227 -74.5127

Region 09

Manufactured Sand

9-39RFM SchoharieCarver Sand & Gravel LLC

Middleburgh, NY- - 19AF023 2.674 2.657 2.702 0.6 - X

Not for Portland Cement Concrete wearing surfaces; Potential for alkali-silica reactivity in Portland cement concrete. To mitigate,

use <0.7% alkali cement or pozzolans;Fine aggregate produced from 9-39R. 42.6358 -74.3158

Region 09

Natural Sand 9-43F1 ChenangoTri City Highway Products, Inc.

Greene, NY (Brisben Pit)- - 19AF158 2.625 2.571 2.717 2.1 - Not for Portland Cement Concrete; Northeast Pit 42.3551 -75.6813

Region 09

Natural Sand 9-43F3 ChenangoTri City Highway Products, Inc.

Greene, NY (Brisben Pit)- - 18AF 90 2.658 2.624 2.718 1.3 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

Blend of 9-43F1 and 3-3RFM. 42.3551 -75.6813

Region 09

Natural Sand 9-43F5 ChenangoTri City Highway Products, Inc.

Greene, NY (Brisben Pit)- - 19AF159 2.639 2.600 2.704 1.5 - X

Potential for alkali-silica reactivity in Portland cement concrete. To mitigate, use <0.7% alkali cement or pozzolans;

42.3551 -75.6813

Page 33 of 38 3/2/2020

Page 37: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 09

Manufactured Sand

9-43GFM1 ChenangoTri City Highway Products, Inc,

Greene, NY (Brisben Pit)- - 19AF168 2.636 2.602 2.693 1.3 - Not for Portland Cement Concrete; Fine aggregate produced from 9-43G1. 42.3551 -75.6813

Region 09

Manufactured Sand

9-48RFM SchoharieCobleskill Stone Products Inc.

Howes Cave, NY- - 19AF022 2.668 2.637 2.722 1.2 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 9-48R. 42.6914 -74.3845

Region 09

Manufactured Sand

9-49RFM Out of StateBirdsboro Materials

Birdsboro, PA- - 18AF 13 2.974 2.960 3.004 0.5 - Fine aggregate produced from 9-49R. 40.2488 -75.8166

Region 09

Manufactured Sand

9-58RSFM Out of StateR.E. Pierson Construction Co.

Middleport, PA (Middleport Materials)- - 18AF 14 2.606 2.577 2.652 1.1 - Fine aggregate produced from 9-58RS. 40.7258 -76.0584

Region 09

Manufactured Sand

9-59RFM Out of StateNew Enterprise Stone & Lime Co. Inc.

Ephrata, PA- - 18AF 15 2.792 2.774 2.824 0.6 - Not for Portland Cement Concrete wearing surfaces; Fine aggregate produced from 9-59R. 40.1575 -76.0976

Region 09

Manufactured Sand

9-60RFM Out of StatePottsville Materials LLC

Pottsville, PA- - 18AF 16 2.600 2.561 2.665 1.5 - Fine aggregate produced from 9-60R. 40.7275 -76.2117

Region 09

Manufactured Sand

9-62RFM Out of StatePennsy Supply, Inc.

Mount Holly Springs, PA- - 18AF 18 2.612 2.594 2.643 0.7 - Fine aggregate produced from 9-62R. 40.1046 -77.2163

Region 09

Natural Sand 9-67F SullivanE. Tetz & Sons Inc.Mamakating, NY

- - 19AF073 2.608 2.568 2.676 1.6 - 41.6230 -74.4474

Region 09

Manufactured Sand

9-68RFM Out of StateQuarry Management Holdings, LLCLackawaxen, PA (Holbert Quarry)

- - 19AF082 2.661 2.624 2.724 1.4 - Fine aggregate produced from 9-68R. 41.4993 -74.9907

Region 09

Manufactured Sand

9-69RFM Out of StateDyer Quarry, Inc.

Birdsboro, PA- - 18AF 19 2.938 2.915 2.983 0.8 - Fine aggregate produced from 9-69R. 40.2734 -75.8476

Region 09

Manufactured Sand

9-70RFM Out of StateDTA Alliance LLC

Palmerton, PA (Alliance Sand Co.)- - 18AF125 2.607 2.593 2.630 0.5 - 40.8031 -75.6275

Region 09

Natural Sand 9-92F Out of StateAustin Excavating & Paving, Inc.Sayre, PA (Atchison S&G Mine)

- - 18AF 66 2.642 2.614 2.688 1.1 - 41.9980 -76.4850

Region 09

Manufactured Sand

10-35RFM Out of StateHanson AggregatesDowningtown, PA

- - 18AF 20 2.725 2.708 2.753 0.6 - Not for Portland Cement Concrete wearing surfaces;Fine aggregate produced from 10-35R.

Assigned to Region 9.40.0107 -75.6694

Region 09

Manufactured Sand

10-36RFM Out of StateNew Enterprise Stone & Lime Co. Inc.Kutztown, PA (Eastern Industries, Inc.

facility)- - 18AF 21 2.803 2.789 2.827 0.5 - Not for Portland Cement Concrete wearing surfaces;

Fine aggregate produced from 10-36R. Assigned to Region 9.

40.5152 -75.7295

Page 34 of 38 3/2/2020

Page 38: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 10

Crushed Bedrock

8-32R Out of StateTilcon New York, Inc.

Mount Hope, NJGranite - 18AR 81 2.711 2.694 2.739 0.6 NY1 Assigned to Region 10. 40.9418 -74.5319

Region 10

Crushed Bedrock

10-3R Out of StateStavola Construction Materials, Inc.

Bound Brook, NJTrap Rock - 19AR053 2.884 2.853 2.943 1.1 NY1 40.5852 -74.5628

Region 10

Crushed Bedrock

10-6R Out of StateTrap Rock Industries LLC

Kingston, NJTrap Rock - 19AR032 3.026 3.015 3.048 0.4 NY1 40.3973 -74.6099

Region 10

Crushed Bedrock

10-12R Out of StateMartin Marietta Materials Canada Ltd.Mulgrave, NS Canada (Cape Porcupine

Quarry)Granite - 18AR 3 2.676 2.664 2.697 0.5 NY1 45.6337 -61.4188

Region 10

Crushed Bedrock

10-20RS Out of StateAtlantic Minerals Ltd.

Lower Cove, NL, CanadaDolomite - 19AR052S 2.743 2.726 2.774 0.6 NY4 48.5532 -59.0214

Region 10

Crushed Bedrock

10-21R Out of StateBaer Aggregates, Inc.

Carpentersville, NJDolomite - 18AR 80 2.811 2.797 2.838 0.5 NY2 40.6471 -75.1916

Region 10

Crushed Bedrock

10-23R Out of StateTilcon New York, Inc.

Oxford, NJGranite - 19AR033 2.855 2.845 2.874 0.4 NY1 40.8205 -75.0157

Region 10

Crushed Bedrock

10-25R Out of StateGibraltar Rock, Inc.

Belle Mead, NJTrap Rock - 19AR031 3.047 3.038 3.066 0.3 NY1 40.4559 -74.7099

Region 10

Crushed Bedrock

10-29R Out of StateAtlantic Coast Materials, Inc.

Bayside, NB CanadaGranite - 18AR 89 2.699 2.685 2.723 0.5 NY1

Material shipped to Brooklyn Navy Yard, Pier J.

45.1627 -67.1378

Region 10

Crushed Bedrock

10-30R Out of StateTilcon New York, Inc.

Stanhope, NJ (Byram Quarry)Granite - 17AR 70 2.858 2.843 2.887 0.5 NY1 40.9411 -74.7226

Region 10

Crushed Bedrock

10-46R Out of StateVulcan Materials Co.Havre de Grace, MD

Granite - 18AR 23 2.808 2.797 2.827 0.4 NY1 39.5726 -76.1106

Region 10

Crushed Bedrock

10-47R Out of StateEastern Concrete Materials Inc.

Glen Gardner, NJGranite - 18AR 82 2.669 2.657 2.689 0.5 NY1 40.6913 -74.9315

Region 10

Crushed Bedrock

10-48R Out of StateFanwood Crushed Stone

Watchung, NJTrap Rock - 19AR030 2.890 2.874 2.919 0.5 NY1 40.6605 -74.4088

Region 10

Crushed Bedrock

10-49R Out of StateVulcan Materials Co.

Petersburg, VAGranite - 18AR 20 2.632 2.617 2.655 0.6 NY1 37.1982 -77.5025

Region 10

Crushed Bedrock

10-51R Out of StateRawson Materials

Thompson, CTGranite - 18AR 56 2.835 2.817 2.867 0.6 NY1 41.9558 -71.8878

Region 10

Crushed Bedrock

10-54R Out of StateRawson Materials

Westerly, RI (Plant #7)Granite - 18AR 78 2.619 2.600 2.651 0.8 NY3 41.3865 -71.8089

Region 10

Crushed Bedrock

10-55R Out of StateRawson Materials

Westerly, RI (Plant #9)Granite - 18AR 77 2.623 2.604 2.656 0.8 NY4 41.4049 -71.8411

Region 10

Crushed Bedrock

10-57R Out of StateLuck Stone Corp.

Rockville, VAGranite - 18AR 22 2.661 2.643 2.693 0.7 NY2 37.6921 -77.6563

Region 10

Crushed Bedrock

10-58R Out of StateLuck Stone Corp.

Manakin, VA (Boscobel Quarry)Argillite - 18AR 21 2.600 2.576 2.639 0.9 37.5963 -77.7200

Region 10

Crushed Bedrock

10-62R Out of StateShoreline Aggregates, Inc.

Baie Verte, NL Canada (South Brook Quarry)

Granite - 19AR002 2.710 2.694 2.737 0.6 NY1 49.9502 -56.1282

Page 35 of 38 3/2/2020

Page 39: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 10

Screened Gravel

10-7G SuffolkBistrian Gravel Corp.

East Hampton, NY- 95 19AG004 2.626 2.610 2.653 0.6 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

40.9880 -72.1735

Region 10

Crushed Gravel

10-7G1 SuffolkBistrian Gravel Corp.

East Hampton, NY- 98 19AG005C 2.585 2.572 2.605 0.5 - 40.9880 -72.1735

Region 10

Screened Gravel

10-16G SuffolkRoanoke Sand & Gravel Corp.

Middle Island, NY- 100 17AG 54 2.638 2.624 2.660 0.5 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

40.8925 -72.9497

Region 10

Crushed Gravel

10-16G1 SuffolkRoanoke Sand & Gravel Corp.

Middle Island, NY- 100 17AG 57C 2.656 2.639 2.685 0.6 - Material from below water table. 40.8925 -72.9497

Region 10

Crushed Gravel

10-18G1 SuffolkCoram Materials Corp.

Coram, NY- 100 19AG019C 2.653 2.635 2.682 0.7 - 40.9075 -72.9656

Region 10

Screened Gravel

10-34G Suffolk110 Sand Co.Melville, NY

- 90 19AG031 2.654 2.637 2.682 0.6 -Not approved for use in Portland cement concrete or bituminous

concrete.Approved for 703-0203, screened gravel

only.40.7695 -73.4403

Region 10

Screened Gravel

10-104G SuffolkEast Coast Mines Ltd.

East Quogue, NY- 95 17AG 7 2.642 2.630 2.663 0.5 -

Not approved for use in Portland cement concrete or bituminous concrete.

Approved for 703-0203, screened gravel only.

40.8659 -72.5996

Region 10

Crushed Gravel

10-192G Out of StateRawson Materials

Plainfield, CT (Plant #5)- 99 19AG008C 2.732 2.709 2.772 0.8 - Check % crushed prior to intended use. 41.6991 -71.9338

Region 10

Crushed Gravel

10-198G Out of StateRawson Materials

Brooklyn, CT (Pit #3)- 100 18AG 31C 2.714 2.681 2.771 1.2 - 41.7500 -71.9382

Page 36 of 38 3/2/2020

Page 40: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 10

Manufactured Sand

8-32RFM Out of StateTilcon New York, Inc.

Mount Hope, NJ- - 18AF 152 2.680 2.670 2.696 0.4 -

Fine aggregate produced from 8-32R. Assigned to Region 10.

40.9418 -74.5319

Region 10

Manufactured Sand

10-6RFM Out of StateTrap Rock Industries LLC

Kingston, NJ- - 19AF040 2.907 2.883 2.955 0.8 - Fine aggregate produced from 10-6R. 40.3973 -74.6099

Region 10

Natural Sand 10-7F SuffolkBistrian Gravel Corp.

East Hampton, NY- - 19AF002 2.641 2.634 2.653 0.3 - 40.9880 -72.1735

Region 10

Manufactured Sand

10-12RFM Out of StateMartin Marietta Materials Canada Ltd.Mulgrave, NS Canada (Cape Porcupine

Quarry)- - 18AF 3 2.633 2.611 2.670 0.8 - Fine aggregate produced from 10-12R. 45.6337 -61.4188

Region 10

Natural Sand 10-16F SuffolkRoanoke Sand & Gravel Corp.

Middle Island, NY- - 19AF044 2.637 2.630 2.649 0.3 - Material from below water table. 40.8925 -72.9497

Region 10

Natural Sand 10-16F4 SuffolkRoanoke Sand & Gravel Corp.

Middle Island, NY- - 17AF 52 2.671 2.659 2.690 0.4 - Blend of 10-186F and 8-9RFM. 40.8925 -72.9497

Region 10

Natural Sand 10-16F5 SuffolkRoanoke Sand & Gravel Corp.

Middle Island, NY- - 17AF 53 2.674 2.660 2.698 0.5 - Blend of 10-211F and 8-9RFM. 40.8925 -72.9497

Region 10

Natural Sand 10-18F SuffolkCoram Materials Corp.

Coram, NY- - 19AF046 2.636 2.629 2.647 0.3 - 40.9075 -72.9656

Region 10

Manufactured Sand

10-23RFM Out of StateTilcon New York, Inc.

Oxford, NJ- - 19AF041 2.815 2.801 2.841 0.5 - Fine aggregate produced from 10-23R. 40.8205 -75.0157

Region 10

Manufactured Sand

10-29RFM Out of StateAtlantic Coast Materials, Inc.

Bayside, NB Canada- - 18AF170 2.670 2.653 2.697 0.6 - Fine aggregate produced from 10-29R. 45.1627 -67.1378

Region 10

Natural Sand 10-34F Suffolk110 Sand Co.Melville, NY

- - 19AF102 2.641 2.637 2.648 0.2 - 40.7695 -73.4403

Region 10

Manufactured Sand

10-47RFM Out of StateEastern Concrete Materials

Glen Gardner, NJ- - 18AF 153 2.714 2.699 2.741 0.6 - Fine aggregate produced from 10-47R. 40.6913 -74.9315

Region 10

Manufactured Sand

10-54RFM Out of StateRawson Materials

Westerly, RI (Plant #7)- - 18AF140 2.611 2.599 2.631 0.5 - Fine aggregate produced from 10-54R. 41.3865 -71.8089

Region 10

Manufactured Sand

10-55RFM Out of StateRawson Materials

Westerly, RI (Plant #9)- - 18AF139 2.621 2.611 2.636 0.4 - Fine aggregate produced from 10-55R. 41.4049 -71.8411

Region 10

Natural Sand 10-74F Out of StateClayton Sand Co.Woodmansie, NJ

- - 18AF 148 2.623 2.613 2.641 0.4 - Material from below water table. 39.8673 -74.4537

Region 10

Natural Sand 10-84F Out of StateClayton Sand Co.

Jackson, NJ- - 17AF171 2.641 2.636 2.650 0.2 - Material from below water table. 40.0651 -74.3199

Region 10

Natural Sand 10-86F Out of StateTuckahoe Sand & Gravel

Upper Township, NJ- - 19AF177 2.623 2.610 2.645 0.5 - Material from below water table. 39.2451 -74.7729

Region 10

Natural Sand 10-98F SuffolkRanco Sand & Stone Corp.

Manorville, NY- - 18AF 150 2.636 2.630 2.645 0.2 - Material from below water table. 40.8476 -72.8243

Region 10

Natural Sand 10-104F SuffolkEast Coast Mines Ltd.

East Quogue, NY- - 19AF043 2.637 2.629 2.650 0.3 - 40.8659 -72.5996

Region 10

Natural Sand 10-105F Out of StateNorth American Aggregates, LLC

Perth Amboy, NJ- - 19AF058 2.615 2.600 2.640 0.6 - Material from below water table. 40.4883 -74.2814

Region 10

Natural Sand 10-105F2 Out of StateNorth American Aggregates, LLC

Perth Amboy, NJ- - 18AF169 2.634 2.623 2.653 0.4 - Blend of 10-105F and 8-32RFM. 40.5387 -74.2561

Region 10

Natural Sand 10-105F8 Out of StateNorth American Aggregates, LLC

Perth Amboy, NJ- - 19AF057 2.678 2.666 2.699 0.5 - Blend of 10-105F and 8-70RFM. 40.5385 -74.2560

Region 10

Natural Sand 10-111F SuffolkWest Hampton Property, LLC

Speonk, NY- - 19AF100 2.927 2.920 2.941 0.2 - 40.8502 -72.6903

Region 10

Natural Sand 10-116F Out of StateWHIBCO, Inc

Port Elizabeth, NJ- - 19AF086 2.633 2.622 2.650 0.4 - 39.3246 -74.9648

Region 10

Natural Sand 10-131F Out of StateHanson Aggregates

Berlin, NJ- - 19AF065 2.633 2.623 2.649 0.4 - 39.7546 -74.9277

Region 10

Natural Sand 10-144F Out of StatePhoenix Pinelands Corp.

Warren Grove, NJ- - 19AF142 2.630 2.622 2.643 0.3 - Material from below water table. 39.7410 -74.3768

Page 37 of 38 3/2/2020

Page 41: NYSDOT Approved Aggregate Sources* for Hot Mix Asphalt and ... · For #1 sized coarse aggregate (generally between ¼ inch and ½ inch), a minimum of 85% of the particles must be

NYSDOT List of Approved Aggregate Sources for Hot Mix Asphalt and Portland Cement Concrete

RegionAggregate Category

NYSDOT Source

Number County Company Name and Source Location

Primary Lithology (Bedrock)

% Non-Carbonate

(Gravel)

Current Approved

Test Number

Bulk SSD

Spec. Grav.

Bulk Dry

Spec. Grav.

Apparent Spec. Grav.

Absorption (%)

Ballast Rating

(Bedrock)ASR Flag Restrictions Remarks Latitude Longitude

Region 10

Natural Sand 10-150F Out of StateAtlantic Coast Materials, Inc.

McMinn, NB Canada (Rollingdam Plant)- - 18AF171 2.650 2.622 2.696 1.0 - 45.2826 -67.0422

Region 10

Natural Sand 10-162F Out of StateClayton Sand Co.Forked River, NJ

- - 19AF141 2.632 2.626 2.640 0.2 - Material from below water table. 39.8830 -74.2875

Region 10

Natural Sand 10-163F Out of StatePhoenix Pinelands Corp.

Cedar Bridge, NJ- - 19AF179 2.622 2.609 2.643 0.5 - 39.7843 -74.3764

Region 10

Natural Sand 10-171F Out of StateHanson Aggregates BMC, Inc.

Newport, NJ- - 19AF087 2.625 2.608 2.652 0.6 - 39.3101 -75.1137

Region 10

Natural Sand 10-172F Out of StateEagles Lake Reserve, Inc.

Eagleswood, NJ- - 19AF144 2.630 2.620 2.647 0.4 - 39.6794 -74.3027

Region 10

Natural Sand 10-182F Out of StateDunRite Sand & Gravel Co., Inc.

Vineland, NJ (Plant #4)- - 18AF 151 2.623 2.614 2.638 0.3 - 39.4123 -74.9643

Region 10

Natural Sand 10-186F Out of StateSahara Sand Inc.Williamstown, NJ

- - 18AF 149 2.633 2.628 2.642 0.2 - 39.6233 -74.9779

Region 10

Natural Sand 10-189F Out of StateEastern Concrete Materials Inc.

Quinton, NJ- - 19AF176 2.601 2.581 2.635 0.8 - 39.5284 -75.3633

Region 10

Natural Sand 10-191F SuffolkSills Road Materials LLC

Yaphank, NY- - 19AF042 2.630 2.620 2.648 0.4 - 40.8233 -72.9386

Region 10

Natural Sand 10-192F Out of StateRawson Materials

Plainfield, CT (Plant #5)- - 18AF 98 2.719 2.704 2.745 0.6 - 41.6991 -71.9338

Region 10

Natural Sand 10-194F SuffolkScatt Materials Corp.

West Yaphank, NY- - 17AF158 2.644 2.635 2.660 0.4 - 40.8265 -72.9437

Region 10

Natural Sand 10-197F Out of StateBrick Wall Corp.Forked River, NJ

- - 19AF143 2.629 2.621 2.641 0.3 - 39.8840 -74.3097

Region 10

Natural Sand 10-198F Out of StateRawson Materials

Brooklyn, CT (Pit #3)- - 18AF 96 2.735 2.720 2.761 0.5 - 41.7500 -71.9382

Region 10

Natural Sand 10-199F Out of StateRawson Materials

Plainfield, CT (Plant #4)- - 18AF 97 2.650 2.633 2.678 0.6 - 41.7217 -71.9318

Region 10

Natural Sand 10-201F Out of StateHanson AggregatesUpper Township, NJ

- - 19AF178 2.625 2.615 2.640 0.4 - 39.2440 -74.7546

Region 10

Natural Sand 10-202F Out of StateVulcan Materials Co.

Petersburg, VA- - 18AF 34 2.588 2.571 2.615 0.6 - 37.2688 -77.3604

Region 10

Natural Sand 10-205F Out of StateSussex Sand & Gravel, Div. of Chaney

EnterprisesSeaford, DE

- - 18AF 32 2.618 2.602 2.644 0.6 - 38.6864 -75.5601

Region 10

Natural Sand 10-210F Out of StateAztec Materials LLC

Hammonton, NJ- - 18AF172 2.611 2.595 2.637 0.6 - 39.5756 -74.7503

Region 10

Natural Sand 10-211F Out of StateGateway Terminal

Bourne, MA (Cape Cod Aggregates)- - 18AF 95 2.636 2.627 2.650 0.3 - 41.7718 -70.5681

Region 10

Natural Sand 10-212F SuffolkSand Highway LLCEast Hampton, NY

- - 18AF111 2.639 2.634 2.646 0.2 - 40.9806 -72.1860

Region 10

Natural Sand 10-214F SuffolkSouthampton Excavation

Riverhead, NY- - 19AF083 2.632 2.624 2.644 0.3 - 40.9437 -72.7155

Region 10

Natural Sand 10-215F Out of StateRawson Materials

Franklin, CT- - 18AF 4 2.686 2.668 2.717 0.7 - 41.6579 -72.1400

Region 10

Natural Sand 10-216F Out of StateGotham Aggregates, LLC

Newark, NJ- - 18AF 39 2.644 2.632 2.663 0.5 - Blend of 8-70RFM, 10-197F and 10-210F. 40.7312 -74.1199

Region 10

Natural Sand 10-216F1 Out of StateGotham Aggregates, LLC

Newark, NJ- - 18AF118 2.676 2.667 2.689 0.3 - Blend of 10-210F and 8-32RFM. 40.7325 -74.1199

Region 10

Natural Sand 10-216F2 Out of StateGotham Aggregates LLC

Newark, NJ- - 19AF099 2.690 2.680 2.707 0.4 - 40.7325 -74.1198

Page 38 of 38 3/2/2020