Directly connects to any PLC for monitoring and status

Ethernet

NX-series Safety ControllerStand-alone System

2 | NX Series Safety Controller2 | NX Series Safety Controller

The safety solution for any application

Scalability

The system allows up to 63

safety/standard I/O units per

coupler; up to 32 safety I/O units to

a maximum of 256 safety I/O signals.

Configure systems with the right

combination of I/O to optimize cost.

Connectivity

The stand-alone system eliminates

the need for dedicated controllers

for safety input devices and allows

for direct connection of safety input

devices.

Maintainability

Detachable screwless

terminal block

The detachable terminal block of

the I/O unit simplifies the

commissioning and maintenance

tasks. Screwless push-in

connections speed up installation.

Safety inputs

Safety outputs

ACR (Automatic Configuration

Restart)

When replacing a safety I/O Unit,

just remove the old unit and insert a

new unit. The setting data is

automatically downloaded without

using the programming software.

FROM TO

SafetyController

The NX Stand-alone Safety Controller is a powerful and robust Safety System that reaches the

PLe according to EN 13849-1 and SIL3 according to IEC 61508. The EtherNet/IP coupler unit

allows for connection to almost any PLC via EtherNet/IP™ or standard Ethernet communications.

The flexible hardware allows the NX safety I/O units to be mixed in any combination with

standard NX I/O units. Sysmac Studio software allows for configuration, programming,

simulation and monitoring functionality.

SafetyISO 13849-1, Cat.4/PLe

IEC 61508 SIL3

EN 62061 SIL3

IEC 61131-2

IEC 61131-3

PLCopen® FBD

PLC

Ethernet

Scalability

The system allows up to 63

safety/standard I/O units per

coupler; up to 32 safety I/O units to

a maximum of 256 safety I/O signals.

Configure systems with the right

combination of I/O to optimize cost.

Connectivity

The stand-alone system eliminates

the need for dedicated controllers

for safety input devices and allows

for direct connection of safety input

devices.

Maintainability

Detachable screwless

terminal block

The detachable terminal block of

the I/O unit simplifies the

commissioning and maintenance

tasks. Screwless push-in

connections speed up installation.

SSSaffeettyy inputs

SSSSaafffettyyoutppuuttss

ACR (Automatic Configuration

Restart)

When replacing a safety I/O Unit,

just remove the old unit and insert a

new unit. The setting data is

automatically downloaded without

using the programming software.

FROM TO

PLCopen® FBD

Ethernet

Versatility

The EtherNet/IP coupler unit

enables connections with various

EtherNet/IP and standard Ethernet

devices. You can monitor safety

status and control standard I/O via

the connected PLC.

Intermediate Controller Direct Connection

| 3| 3

Flexibility and reusability of programming code

Standard programming with Sysmac Studio

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.

STI is a trademark or registered trademark of OMRON Corporation in Japan and other countries. EtherNet/IP™ is a trademark of ODVA.

Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

The product photographs and figures that are used in this catalog may vary somewhat from the actual products. Microsoft product screen shot(s)

reprinted with permission from Microsoft Corporation.

Sysmac Studio is compliant to the IEC 61131-3 standard

and utilizes PLCopen® function blocks.

The safety controller provides a large program capacity of

512 KB (equivalent to more than 1,000 function blocks),

visual setting of IO and automatic generating wiring

diagram,variable style programming, reusable

user-defined function blocks, offline simulation and

simple automatic test.

User-defined function blocks

You can define your own function blocks. Repeat use of

user-defined function blocks cuts programming time and

maintains consistency of quality. Secure the code with password

protection and add user-defined help files to make re-using

functions safe and easy.

Emergency stop circuit system

Safety guard system

Robot control system

Programming with variables

Unlike previous programming with physical addresses,

programming with variables does not depend on the hardware

configuration. You can use the same code for the machine with a

different hardware configuration by flexibly changing connections

between variable names and hardware memory addresses.y

Offline simulation and simple automatic test

You can check operation on the Simulator without physical devices.

Furthermore, basing on the relationship between inputs and

outputs, program can be tested automatically.

This significantly reduces program modification and debugging

time.

Visual setting of IO and automatic generating

wiring diagram

By drag&drop the visual icon, the settings of I/Os are completed.

Wiring diagrams are also automatically generated based on

terminal settings. The wiring diagrams can be used for wiring

check and Technical Construction Files (TCF).

Authorized Distributor:

In the interest of product improvement, specifications are subject to change without notice.

Cat. No. F100-E1-01 0316（0316）

© OMRON Corporation 2016 All Rights Reserved.

OMRON Corporation Industrial Automation Company

OMRON ELECTRONICS LLC2895 Greenspoint Parkway, Suite 200 Hoffman Estates, IL 60169 U.S.A.Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

Regional HeadquartersOMRON EUROPE B.V.Wegalaan 67-69, 2132 JD HoofddorpThe NetherlandsTel: (31)2356-81-300/Fax: (31)2356-81-388

Contact: www.ia.omron.com Kyoto, JAPAN

OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711

OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Licenses and DVDs are ordered separately.

Product name Specifications ModelNumber of licenses Media

Sysmac StudioSafety Edition *2Ver.1.

1 license SYSMAC-NE001L

Sysmac Studio (64bit) DVD

SYSMAC-SE200D-64

Automation Software Sysmac Studio

-(Media only)

Sysmac Studio (32bit) DVD

SYSMAC-SE200D-(Media only)

Sysmac Studio NX-I/O Edition is a limited license that provides selected functions required for EtherNet/IP Coupler settings. * This product is a license only. You need the Sysmac Studio Standard Edition DVD

media to install it.

The Sysmac Studio is the software that provides an integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NY-series Industrial PC, EtherCAT Slave, and the HMI.Sysmac Studio runs on the following OS.Windows 7(32-bit/64-bit version)/Windows 8(32-bit/64-bit version)/Windows 8.1(32-bit/64-bit version)/Windows 10(32-bit/64-bit version) *4

Sysmac StudioNX-I/O Edition *1Ver.1.

1 license SYSMAC-FE001L

Sysmac Studio Safety Edition is a license including necessary setting functions for the safety control system.* This product is a license only. You need the Sysmac Studio Standard Edition DVD

media to install it.

Sysmac StudioStandard Edition *3Ver.1.

Note: For details of the Automation Software Sysmac Studio, refer to your local OMRON website. ＊1. With the NX-I/O Edition, you can use only the setup functions for EtherNet/IP Coupler. ＊2. Safety Edition can be used with Communication Control Unit and EtherNet/IP Coupler Unit. ＊3. The Sysmac Studio Standard Edition with license(s) (SYSMAC-SE L) provides functions of the NX-I/O Edition (SYSMAC-NE001L) and functions of the Safety Edition

(SYSMAC-FE001L). With the Sysmac Studio Standard Edition with license(s) (SYSMAC-SE L) version 1.10 or higher, you can use the setup functions for the EtherNet/IP Coupler.

＊4. Model "SYSMAC-SE200D-64" runs on Windows 10 (64bit).

System configuration

NX-series EtherNet/IP Coupler Unit NX Unit power consumption

1.60 W max.

Maximum I/O power supply current

10A

Model

NX-EIC202

Accessary: End coverSafety CPU Unit

Maximum number of safety I/O points

256

Number of safety master connections

32

Model

NX-SL3300

Programcapacity

512KB

Safety Input UnitRated input

voltage

24 VDC

24 VDC

OMRON special safety input devices

Can be connected

Cannot be connected

Model

NX-SIH400

NX-SID800

Number of test output points

2 points

2 points

4 points

8 points

Number of safety input points

Safety Output Unit

Number of safety output points

2 points

4 points

Internal I/O

common

Sourcing outputs(PNP)

Sourcing outputs(PNP)

Maximum load current

2.0 A/point

0.5 A/point and 2.0 A/Unit

Model

NX-SOH200

NX-SOD400

Rated input voltage

24 VDC

24 VDC

NX-seriesCoupler Units: - 1 unit

NX-seriesStandard I/O Units (Analog,Digital) *

End cover- 1 unit

NX-seriesSafety CPU Units: - 1 unit

NX-seriesSafety I/O Units: - up to 32 units

* Refer to your OMRON website for details.

CSM_1_4_0220