NV Geforce Graphics Card Manual en V1.0
-
Upload
mark-drefahl -
Category
Documents
-
view
220 -
download
0
Transcript of NV Geforce Graphics Card Manual en V1.0
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
1/28
Statement:
This manual is the intellectual property of Foxconn, Foxconn reserves
the right to make changes at any time without notice.
Trademark:
All trademarks are the property of their respective owners.
Version:
Users Manual V1.0 for GeForce series Graphics Card.
P/N: 91-181G880010-02
Symbol description:
Note: refers to important information that can help you to use graphics
card better.
Attention: indicates that it may damage hardware , and tells you how to
avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists. WEEE: The use of the symbol indicates that this product may not betreated as household waste. By ensuring this product is disposed of
correctly, you will help prevent negative consequences for the environ-
ment and human health, which could otherwise be cause by inappro-
priate waste handing of this product.
For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or
the shop where you purchased the product.
FCC: This product has passed FCC certification.
CE: This product has passed CE certification.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
2/28
More information:Please visit Foxconns website, for more information about this prodduct.
http://www.foxconnchannel.com/
The Americas-Technical Support
City: Fullerton
Tel: +1.714.871.9968 x206
E-mail: Please use the service/ Online Contact form on
http://www.foxconnchannel.com/en-us/service/online.aspx
Address: 458 E. Lambert Road, Fullerton, CA (USA)
Postcode: 92835
Netherlands
City: Eindhoven
Tel: +31.40.290.2250
E-mail: [email protected]
Address: Esp 131, 5633AA Eindhoven The Netherlands
Postcode: 5633AA
Italy
City: Milano
Tel: +39.02.36529300
E-mail: [email protected]
Address: Centro Direzionale Milanofiori Strada 6, Palazzo N2, 5 Piano
20089 Rozzano (MI), Italy
Postcode: 20089
Russia
City: Moscow
Tel: +7.095.710.8900
E-mail: [email protected]
Address: 119435,Moscow,Bolshoy Savvinsky Per., 9, office 1001Postcode: 119435
http://www.foxconnchannel.com/http://www.foxconnchannel.com/en-us/service/online.aspxmailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://www.foxconnchannel.com/en-us/service/online.aspxhttp://www.foxconnchannel.com/ -
7/31/2019 NV Geforce Graphics Card Manual en V1.0
3/28
Package:
Thanks for your purchasing Foxconns GeForce series Graphics Card. Please
check the package; if there are missing or damaged items, please contact your
distributor as soon as possible.
vGraphics Card
vDVI-I to D_Sub(Optional)
vHDTV Cable(Optional)
vUSB Game Pad (Optional)
vUsers Manual
vDriver CDvUtility CD(RestoreIT V7.0 and VirtualDrivePro V10.0) (Optional)
vS-Video Cable (Optional)
vGraphics Card Power cable(Optional)
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
4/28
Installation Instructions
Connect Graphics Card ............................................................................. 2
Install the Graphics Card ...................................................................... 4
Install SLITM System .............................................................................. 5
Driver CD Introduction
Driver CD Content ................................................................................. 8
Install Graphics Card Driver ................................................................ 9
Install Microsoft DirectX 9.0 ................................................................ 10
Install Foxware ......................................................................................11
Table of Contents
Chapter 11
Chapter 22
Driver CD Introduction
Disp lay Properties Pages ................................................................... 14
33Chapter
Driver CD Introduction
Foxware setting .................................................................................... 21
34Chapter
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
5/28
Ensure that the computer power supply is turned off before insert
ing or removing Graphics Card. Failure to switch off the computer
power supply may result in serious damage to your system or
Graphics Card.
We cannot guarantee that your system will operate normally while
over-clocked. Normal operation depends on the over-clock capacity
of your device.
Warning:
Attention:
Note:
The pictures of objects used in this manual are just for your reference.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
6/28
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
7/28
1
Chapter 2 Driver CD Introduction
Read through this Users manual carefully before installing your
Graphics Card. Please makesure your system goes smoothly.
This chapter includes the following information:
v Connect Graphics Card
v Install the Graphics Card
v Install SLITM System
Chapter11
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
8/28
Chapter 1 Installation Instructions
2
Connect Graphics Card
Pb/COMP OUT
S-VID OUT
Y OUT
Pb/COMP OUT
Pr OUT
Projector
DVI Output
VGA Output
NTSC/PAL TV
HDTV
LCD Monitor
Pb/COMP OUT
S-VID OUT
Y OUT
Pb/COMP OUT
Pr OUT
Projector
DVI Output
Graphics Card
NTSC/PAL TV
HDTV
LCD Monitor
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
9/28
Chapter 1 Installation Instructions
3
Pb/COMP OUT
S-VID OUT
Y OUT
Pb/COMP OUT
Pr OUT
Projector
VGA Output
VGA Output
NTSC/PAL TV
HDTV
LCD Monitor
Note:
You can connect the RCA/AV/Pr interface to Pb/COMP OUT.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
10/28
Chapter 1 Installation Instructions
4
Step1. Shut down your computer and unplug the system power cord.
Step2. Take the case cover off. If there is any Graphics Card, please remove them.
Step3. Take the Graphics Card out from the static-proof bag and install it on the
motherboard carefully
Step4. Put on the case cover and connect the monitor or TV cables to the rear
Video output port of the Graphics Card.
Step5. Reboot your PC.
Install the Graphics Card
1. Be sure to unplug the AC power cord before adding or removing Graph-
ics Cards otherwise your motherboard or the Graphics Cards might be
seriously damaged.
2. Ensure you insert the Graphics Card in the correct slot. PCI-Express
cards differ from AGP cards, Make sure that you locate the correct slot,
otherwise you could cause damage to your PC.
3.To avoid damage from static electricity, make sure that you have dis-
charge the static electricity before installation.
4. Some Graphics Cards have an additional power connect; if your Graph-
ics Card has one, make sure that the connect is connected with the power
supply, or the Graphics Card may not work properly!
Attention:
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
11/28
Chapter 1 Installation Instructions
5
Install SLITM
SystemStep1. Install two Graphics Cards on a SLI ready motherboard, please makesure
that the Graphics Cards are the same type.
Step2. Connect Graphics Card power connector and system power supply connector.
Graphics Card
Power Cable
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
12/28
Chapter 1 Installation Instructions
6
Step 3. Install the SLI Bridge Board to the goldfingers on each Graphics Card. Makesure that the connector is firm in place.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
13/28
Chapter 1 Installation Instructions
7
The Driver CD that cames with the Graphics Card contains
several drivers and useful software that enhance the Graph-
ics Card features.
This chapter includes the following information:
v Driver CD content
v Install Graphics Card Driver
v Install Microsoft DirectX 9.0
v Install Foxware
Chapter
22
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
14/28
Chapter 2 Driver CD Introduction
8
1. Driver
A. VGA Driver [32 bit for Win2K/XP] B. VGA Driver [64 bit for WinXP64]
C. VGA Driver [for Vista x86] D. VGA Driver [for Vista x64]
E. USB Game Pad Driver
2. Utility
A. Foxware B. Microsoft DirectX 9.0
C. Adobe Acrobat Reader
3. Manual
Click here to review user manual content.
Driver CD contentThis Graphics Card comes with one Driver CD. To begin CD, simply insert the
CD into CD-ROM driver. The CD will automatically displays the main menu screen
as below.
ClickDriver button
ClickUtility button
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
15/28
9
Chapter 2 Driver CD Introduction
Install Graphics Card Driver
1. Click the VGA Driver you want to install on the Driver page, The Installation
Program runs automatically. Click Next button to go on the installation.
2. Choose Yes, I want to restart my computer now, then click the Finish button
to restart computer, the driver installation is completed.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
16/28
Chapter 2 Driver CD Introduction
10
Install Microsoft DirectX 9.0
1. Click Microsoft DirectX 9.0 to install Microsoft DirectX 9.0 on the Utility page.
Choose I accept the agreement, then click Next button to go on the installation.
2. Click the Next button to go on the installation.
3. Click Finish to restart your computer, the Microsoft DirectX 9.0 installation is
completed.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
17/28
11
Chapter 2 Driver CD Introduction
Install Foxware
1. Click Foxware on Utility page to install Foxware. Click Next button to go on
the installation.
2. To install to this folder, click Next to continue the installation.
3. Click the Finish button, Setup has finished installing Foxware on your
computer.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
18/28
Chapter 2 Driver CD Introduction
12
After the Graphics Card driver is installed completely, an ICON will showson Notification Area. Click this icon to open the control panel.
Click this icon
You can set
display param-
eters from here
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
19/28
13
Chapter 3 Display Properties Setting
This chapter shows how to set Display Properities Pages.
This chapter includes the following information:
v Display Properties Pages
Chapter
33
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
20/28
Chapter 3 Display Properties Setting
14
Display Properties Pages
Right-click any where on Desktop and select Properties. The Display Properties
dialog box shows.
To set the Screen refresh rate, click the Advanced button, select Monitor tab, then
click Refresh Frequency pull-down menu and select the refresh rate you want .
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
21/28
15
Chapter 3 Display Properties Setting
To start the NVDIA Control panel, click the GeForce XXXX tab, then click Start
the NVDIA Control Panel button.
Once NVDIA Control panel is launched , three category choices are available; 3D
Settings, display and Video&Television.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
22/28
Chapter 3 Display Properties Setting
16
3D Setting
3D Settings is where you change the various game settings. There are two sub-
categories in this category, Appearance and Performance. Appearance allows
you to adjust image settings with preview and manage 3D settings;The Perfor-
mance gears the settings to highest performance.
SLI multi-GPU Setting (Optional)
To use SLI multi-GPU Setting, you must have installed two Foxconn Graphics
Cards on a SLI ready motherboard, and makesure the Graphics Cards are the
same type.
Choose
Enable SLI Technology
, then SLI function is effective.
Note:
NVIDIA SLI Technology only supports W indows XP or above Operating System.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
23/28
17
Chapter 3 Display Properties Setting
Adjust Desktop Color Settings
Changing settings like Brightness, Digital Vibrance, Contrast, Image Sharpen-
ing and Gamma is done in the adjust color settings.
DisplayThe Display category gives you options: Run display optimization wizard, move
screen position, change resolution attributes, adjust desktop color settings,
rotate display, and manage custom timings. The display optimization wizard
takes you through a series of menus to automatically set your displays.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
24/28
Chapter 3 Display Properties Setting
18
Change Resolution Attributes
You can change the monitor resolution and refresh rate in this page.
Video &Television
You can change Video and Television setting items from this page.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
25/28
19
Chapter 3 Display Properties Setting
Change the Signal or HD FormatYou can change the signal format to use for your standard television(HDTV) as
well as change the country specfic signal, or the HDTV display format if you are
using an HDTV.
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
26/28
Chapter 2 Driver CD Introduction
20
This chapter will introduce how to use attached software.
This chapter includes the following information:
v Foxware
Chapter
44
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
27/28
Chapter 4 Directions for bundled software
Foxware setting
Foxware have 3 pages, each page allows user to,
Information: to display the Graphics Card and software information.
Frequency: to display and adjudge Graphics Card core and memory
clock.
Temperature: to monitor current GPU temperature. It can set a warning
temperature, when the GPU temperature over the warning
temperature, program will alert with beeper or shutdown.
Information
This page display the graphics card and software informaiton.
Current Core clock
Current Memory Clock
GPU Temperature
Graphics Card and
soft ware information
-
7/31/2019 NV Geforce Graphics Card Manual en V1.0
28/28
Chapter 4 Directions for bundled software
FrequencyThis page can display and adjudge Graphics Card core and memory clock.
Temperature
This page can monitor current GPU temperature. It can set a warning temperature,
when the GPU temperature over the warning temperature, program will alert with
beeper or shutdown.
Load default colck
Apply the change
Apply clock settings at
Windows Startup
Increase 1 MHzCurrent Memory clock
Click on this bar to adjust clock roughy
Setting Memory clock
Decrease 1 MHzSetting Core clock
Increase 1 MHz
Decrease 1 MHz
Click on this bar to adjust clock roughy
GPU Temperature Warning temperatureAdjust waring temperature
Temperature display unit
setting can set to degree C
or degree F
Checked for shutdown or alert by beeper,
when current temperature reach warning
temperature
Apply the change