mosaic patterns of thermal stress in the rocky intertidal zone
NTS FACILITY SPOTLIGHT CHICAGO, ILLINOIS» Rapid Decompression, Explosive Decompression • Thermal...
Transcript of NTS FACILITY SPOTLIGHT CHICAGO, ILLINOIS» Rapid Decompression, Explosive Decompression • Thermal...
NTS FACILITY SPOTLIGHT
CHICAGO, ILLINOIS
Our state-of-the-art laboratory is positioned just outside
downtown Chicago
Multiple EMI/EMC test chambers including a 5m oversized unit
Discover the robustness of your product after exposure to
harsh environments
www.nts.com800.270.2516
ABOUT NTS CHICAGO
NTS Chicago features a 40,000 square foot state-of-the-art facility in Mt. Prospect, IL. We
have over thirty years’ experience partnering with customers to provide significant gains
in compliance, reliability and durability. Our team guides your product through testing
while providing seamless communication and program management. We have your
solution to qualification requiring both EMC and environmental simulation requirements
such as military, avionics, automotive, off-road automotive and aerospace.
This location houses full EMC/EMI capabilities and blowing sand/blowing dust testing to
complement our long-standing environmental capabilities such as vibration, thermal shock
and cycling, temperature humidity, acceleration, corrosion, altitude and HALT/HASS. With
the addition of these capabilities, we can now offer a one-stop-shop solution to partner
companies who want to get their compliant products to market quickly and efficiently.
EMI/EMC/ESD TESTING
• 5-meter semi-anechoic chamber with 10’x10’ door, 12,000 lb capacity turntable, vehicle exhaust system and troubleshooting projection screen inside the chamber
• Four EMI test chambers
• Large, sectioned ground plane with pre-configured commercial immunity stations for expedited testing
• Full vehicle automotive testing
• Automotive Testing to JDQ 53.3, JDQ 202, JDQ 203, load dumps, transients
• Commercial Product Testing – FCC, EMC Directive, CISPR, 61000-X-X
• Medical Directive Testing – 60601-1-2
• Military MIL-STD-461 (D,E,F)
• Avionics RTCA/DO-160 ( D,E,F,G)
• Other customer standards as requested
DYNAMICS TESTING
• 20,000, 18,000 and 6,500 force pound electrodynamic shakers
• Vibration at Temperature
• Constant Acceleration/Centrifuge
• Loose Cargo Vibration
• ISTA Package Testing
• HALT/HASS Chambers (30”x30”x30” and 48”x48”x48”)
• Package Drop
CHEMICAL TESTING
• Copper-Accelerated Acetic Acid-Salt Spray (CASS)
• Chemical Compatibility
• Chemical Resistance
• Contamination by Fluids
• Fluid Compatibility
• Fluid Immersion
• Fluid Resistance
• Fluid Susceptibility
• Porosity
• Salt Spray/Fog/Mist
• Solderability
NTS Chicago1660 Wall St. Suite 100Mt. Prospect, IL 60056
800.270.2516 | www.nts.com
©2018 National Technical Systems. All rights reserved. Specifications
subject to change.
Our chemical engineers can offer a myriad of solutions for the most
complicated challenges
NTS Chicago’s expertise in HALT testing will find the limits and
discover the weak links of your products and systems
ENVIRONMENTAL SIMULATION
• Temperature/Humidity Testing
» 9 standing chambers
» 2 walk-in chambers up to 11’x12’
» Temperature ranges -70 to 130˚C
» Humidity control throughout condensing range of 5 to 90˚C
• Altitude Chamber
» 70,000 ft. with temperature -55 to 150 degrees C
» Rapid Decompression, Explosive Decompression
• Thermal Shock/Thermal Cycling
» 9 Single-Zone, 10 Dual-Zone and one Large Dual-Zone Thermal Cycling Chamber
• Blowing Sand
• Blowing Dust
• Settling Dust
• Ingress Protection IPXX, levels 1 through 9k
• Icing/Freezing Rain
• Explosive Atmosphere
• Salt Fog
• CASS Testing
• Solar Radiation
• Gravel Bombardment
• Advanced Cycling and Abrasion Testing
• Flammability
ELECTRICAL TESTING
• AC/DC High Voltage
• Capacitance
• Continuity Monitoring
• Current Measure
• Dielectric Strength
• Dissipation Factor (Tam Delta)
• Dielectric Withstand Voltage
• High Pot
• Inductance
• Insulation Resistance
• Leakage Current
• Low-level Contact Resistance
• Moisture Insulation Resistance
• Power & Current Cycling
• Q Factor
• Resistance
• Resistance Temp Coefficient
• Surface/Volume Resistivity
• UN/IATA Battery Testing
• Voltage Drop
MECHANICAL TESTING
• Abrasion
• Adhesion
• Bend
• Breaking Force/Strength
• Compression/Compression Set
• Durometer Hardness
• Fatigue Life
• Insertion/Engaging/Withdrawl
• Mechanical Durability/Cycling
• Peel Strength
• Push/Pull/Deflection
• Resistance to Solder Heat
• Separating Force
• Shear/Lap Shear
• SolidWorks Fixture Design
• Strain Gauge
• Tensile/Elongation/Flex
• Torque/Torsional Strength
ABOUT NTS
As one of the largest commercial test laboratory networks in North America, NTS offers
test, inspection and certification services for environmental, dynamics, EMC, wireless,
product safety, materials, ballistics and much more. Our client partners rely on NTS to
bring quality products to market quickly and efficiently, and so can you.
NTS FACILITY SPOTLIGHT | CHICAGO, ILLINOIS