NTE941SM

download NTE941SM

of 4

Transcript of NTE941SM

  • 8/7/2019 NTE941SM

    1/4

    NTE941M & NTE941SMIntegrated Circuit

    Operational Amplifier

    Description:

    The NTE941M and NTE941SM (Surface Mount) are general purpose operational amplifiers in

    8Lead DIP type packages and offer many features which make their application nearly foolproofoverload protection on the input and output, no latchup when the common mode range is exceededas well as freedom from oscillators.

    Absolute Maximum Ratings:

    Supply Voltage, VS 18V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Differential Input Voltage, VID 30V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Common Mode Input Voltage (Note 2), VICM 15V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Power Dissipation (Note 1), PD 500mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Output ShortCircuit Duration, tS Continuous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operating Temperature Range, Topr 0 to +70C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Storage Temperature Range, Tstg 65 to +150C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Junction Temperature, TJ +100C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Lead Temperature (During Soldering, 10sec), TL +260C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Thermal Resistance, JunctiontoAmbient, RthJANTE941M +100C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NTE941SM +195C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Note 1. For operation at elevated temperatures, these devices must be derated based on thermaresistance, and TJ Max (TJ = TA + (RthJA PD).

    Note 2. For supply voltage less than 15V, the absolute maximum input voltage is equal to the supplyvoltage.

  • 8/7/2019 NTE941SM

    2/4

    Electrical Characteristics: (VS = 15V, 0 TA +70C unless otherwise specified)

    Parameter Symbol Test Conditions Min Typ Max Unit

    Input Offset Voltage VIO RS 10k TA = +25C 2.0 6.0 mV

    7.5 mV

    Input Offset Voltage Adjustment Range VIOR VS = 20V, TA = +25C 15 V

    Input Offset Current IIO TA = +25C 20 200 nA

    300 nA

    Input Bias Current IIB TA = +25C 80 500 nA

    0.8 A

    Input Resistance ri VS = 20V, TA = +25C 0.3 2.0 M

    Common Mode Input Voltage Range VICR TA = +25C 12 13 V

    Large Signal Voltage Gain AV VO = 10V, TA = +25C 20 200 V/mVRL 2k 15 V/mV

    Output Voltage Swing VO RL 10k 12 14 V

    RL 2k 10 13 V

    Output ShortCircuit Current IOS TA = +25C 25 mA

    CommonMode Rejection Ratio CMRR RS 10k, VCM = 12V 70 90 dB

    Supply Voltage Rejection Ratio PSRR VS = 20V to 5V, RS 10k 77 96 dB

    Transient Response Rise Time tTLH TA = +25C, Unity Gain 0.3 s

    Transient Response Overshoot os 5 %

    Transient Response Slew Rate SR 0.5 V/s

    Supplu Current ID TA = +25C 1.7 2.8 mA

    Power Consumption PC TA = +25C 50 85 mW

    Pin Connection Diagram

    N.C.

    V ()

    V (+)

    Output

    Inverting Input

    1

    2

    3

    4

    Offset Null

    NonInverting Input

    8

    7

    6

    5 Offset Null

  • 8/7/2019 NTE941SM

    3/4

    NTE941M

    NTE941SM

    8 5

    .256 (6.52) Max

    .393 (10.0)Max

    1 4

    .300 (7.62)

    .300 (7.62)

    .150(3.81)

    .070 (1.77) Min.100 (2.54)

    .198 (5.03)

    .236(5.99)

    NOTE: Pin1 on Beveled Edge

    .154(3.91)

    061(1.53)

    .006 (.152)

    1 4

    8 5

    .192 (4.9)

    .050 (1.27) 016(.406)

  • 8/7/2019 NTE941SM

    4/4