NSIC TECHNICAL SERVICES CENTRE, CHENNAI -32. · Timber company Chennai getting a salary of Rs. 8000...
Transcript of NSIC TECHNICAL SERVICES CENTRE, CHENNAI -32. · Timber company Chennai getting a salary of Rs. 8000...
NSIC TECHNICAL SERVICES CENTRE, CHENNAI
I, R. Saminathan did course in Basic Electronics ”
period from 6.3.2017 to
for me. Now I am working
and getting a pay of Rs.7,000/
this opportunity.
I G. Mareshwaran did course in Basic Electronics ”
a period from 26.42017
useful for me. Now I am working
Chennai Chennai , as Service engineer and getting a pay of
Rs.22,000/-p.m. I Thank NSIC for giving me this opportunity
I Muzaffar Ahmed M did
for a period from 29.5.2017
useful for me. Now I am working
Ltd, Chennai , as engineer and getting a pay of Rs.10,000/
I Thank NSIC for giving me this opportunity
I S.M. Surendhar did course in Basic Electronics ”
period from 29.5.2017
useful for me. Now I am working
Chennai , as engineer and getting a pay of Rs.10,000/
Thank NSIC for giving me this opportunity
I S. Suresh Kumar did course in Field Technician ”
a period from 6.3.2017
useful for me. Now I am working
Chennai , as Charge Entry and getting a pay of Rs.3000/
Thank NSIC for giving me this opportunity
NSIC TECHNICAL SERVICES CENTRE, CHENNAI
SUCCESS STORIES - 1
course in Basic Electronics ” at NSIC for a
to 21.4.2017. This course was very useful
for me. Now I am working in M/s. ONGC , as Graduate trainee
and getting a pay of Rs.7,000/-p.m. I Thank NSIC for giving me
course in Basic Electronics ” at NSIC for
26.42017 to 13.6.2017. This course was very
seful for me. Now I am working in M/s. Exide Baterry,
Chennai Chennai , as Service engineer and getting a pay of
I Thank NSIC for giving me this opportunity.
did course in Basic Electronics ” at NSIC
29.5.2017 to 14.7.2017. This course was very
useful for me. Now I am working in M/s. Vadim Infrastructure
Ltd, Chennai , as engineer and getting a pay of Rs.10,000/-p.m.
I Thank NSIC for giving me this opportunity.
course in Basic Electronics ” at NSIC for a
to 14.7.2017. This course was very
useful for me. Now I am working in M/s. Orbit Controls pvt ltd
Chennai , as engineer and getting a pay of Rs.10,000/-p.m. I
SIC for giving me this opportunity.
course in Field Technician ” at NSIC for
6.3.2017 to 21.4.2017. This course was very
useful for me. Now I am working in M/s. AGS Health Care,
Chennai , as Charge Entry and getting a pay of Rs.3000/-p.m. I
Thank NSIC for giving me this opportunity.
NSIC TECHNICAL SERVICES CENTRE, CHENNAI-32.
I M.T. Meenu did course in Field Technician ” at NSIC for a
period from 6.3.2017 to 21.4.2017. This course was very useful
for me. Now I am working in M/s. Sutherland pvt ltd, Chennai ,
as Consultant and getting a pay of Rs.13000/-p.m. I Thank
NSIC for giving me this opportunity.
I V. Gokula krishnan did course in Field Technician ” at NSIC
for a period from 6.3.2017 to 21.4.2017. This course was very
useful for me. Now I am working in M/s. Exide Batteries pvt ltd
, Chennai , as Service engineer and getting a pay of Rs.12000/-
p.m. I Thank NSIC for giving me this opportunity.
I R. Rachana did course in Engineering project ” at NSIC for a
period from 8.1.2017 to 21.2.2017. This course was very useful
for me. Now I am working in M/s. Q spider, Chennai , as
Trainee and getting a pay of Rs.18000/-p.m. I Thank NSIC for
giving me this opportunity.
I M. Jaganthan did course in Embedded Hardware Developer ”
at NSIC for a period from 17.10.2017 to 14.11.2017. This
course was very useful for me. Now I am running my own
business M/s. Ganapathy Agency Chennai with a turnover of
1.37 crores. I Thank NSIC for giving me this opportunity.
I Prema V. did course in Engineering project ” at NSIC for a
period from 8.1.2017 to 21.2.2017. This course was very useful
for me. Now I am working in M/s. Infosys Mysore , as Engineer
and getting a pay of Rs.15000/-p.m. I Thank NSIC for giving
me this opportunity.
I C. Suvetha did course in Engineering project ” at NSIC for a
period from 8.1.2017 to 21.2.2017. This course was very useful
for me. Now I am working in M/s. Infosys, Mysore, as Engineer
and getting a pay of Rs.15000/-p.m. I Thank NSIC for giving
me this opportunity.
I S. Vaibhavan course in Embedded Hardware Developer ” at
NSIC for a period from 8.11.2017 to 12.12.2017. This course
was very useful for me. Iam working as Global Manager in M/s.
I Gain Chennai with a turnover of 1.37 crores. I Thank NSIC for
giving me this opportunity.
I Sreejith K R course in Embedded Design using RTOS ” at
NSIC for a period from 12.11.2017 to 12.1.2018. This course
was very useful for me. Iam working as Execution &
communication engineer in M/s. Vijaya Tanks ans Vessels ,
Chennai getting a salary of Rs. 2.00lacs per annum. I Thank
NSIC for giving me this opportunity.
I J. Muthu course in Embedded Hardware Developer ” at
NSIC for a period from 12.7.2017 to 20.8.2017. This course
was very useful for me. Iam working as Manager in M/s.
Apollo Tyers Chennai getting a salary of Rs. 4.50 lacs per
annum. I Thank NSIC for giving me this opportunity.
I S. Godwin Sundhar course in E CAD ” at NSIC for a period
from 7.11.2017 to 6.12.2017. This course was very useful for
me. Iam working as SAP booking in M/s. Timber company
Chennai getting a salary of Rs. 8000 per month. I Thank NSIC
for giving me this opportunity.
I Azhagappan R. course in FPGA ” at NSIC for a period from
12.2.2017 to 10.4.2017. This course was very useful for me.
Iam working as SAP booking in M/s. Timber company Chennai
getting a salary of Rs. 8000 per month. I Thank NSIC for giving
me this opportunity.
I N.S. Sarunyan course in E-CAD ” at NSIC for a period from
7.11.2017 to 6.12.2017. This course was very useful for me.
Iam working as Draughtsman in M/s. Sandy Construction
Chennai getting a salary of Rs. 11000 per month. I Thank NSIC
for giving me this opportunity.
I D.Rathish did course in Embedded Hardware Developer ” at
NSIC for a period from3.1.2018 to 6.2.2018. This course was
very useful for me. Iam working as Voice in M/s. Kochar
Chennai getting a salary of Rs. 1.30 per annum. I Thank NSIC
for giving me this opportunity.
I S.Suresh kumar course in UPS and Inverter ” at NSIC for a
period from 6.3.2017 to 21.4.2017. This course was very useful
for me. Iam working as Process Associate in M/s. AGS Health
Pvt Ltd Chennai getting a salary of Rs. 1.50 lacs per annum. I
Thank NSIC for giving me this opportunity.
I B. Vasudevan did course in Embedded Hardware Developer”
at NSIC for a period from 10.9.2017 to 12.10.2017. This course
was very useful for me. Iam working as System Admn in M/s.
Inspire Network Solution, Chennai getting a salary of Rs.
10,000 per month. I Thank NSIC for giving me this
D. Madhan kumar did course in Embedded Hardware
Developer” at NSIC for a period from 8.11.2017 to 12.12.2017.
This course was very useful for me. Iam working as Quality
engineer in M/s. Ford India pvt ltd, Chennai getting a salary of
Rs. 10,000 per month. I Thank NSIC for giving me this
I M.Dinesh did course in Embedded Hardware Developer” at
NSIC for a period from 8.11.2017 to 12.12.2017. This course
was very useful for me. Iam working as BMS Engineer in M/s.
Honeywell Automation India Pvt ltd, Chennai getting a salary
of Rs. 1.40 lacs per annum. I Thank NSIC for giving me this
I G.P. Ajith kumar did course in Autocad” at NSIC for a period
from 7.12.2017 to 8.1.2018. This course was very useful for
me. Iam working as Technician in M/s. Delphi Automotive Ltd
, Chennai getting a salary of Rs. 1.20 lacs per annum. I Thank
NSIC for giving me this opportunity.
I A. Arjun did course in Embedded Hardware Developer” at
NSIC for a period from 11.10.2017 to 14.11.2017. This course
was very useful for me. Iam working as Technician in M/s.
Virco Manufacturing , Chennai getting a salary of Rs. 1.34 lacs
per annum. I Thank NSIC for giving me this opportunity.
I R. Saran Kumar did course in Embedded Hardware
Developer” at NSIC for a period from 8.11.2017 to
12.12.2017. This course was very useful for me. Iam
working as Embedded Developer in M/s. RHDH Business
Solutions , Chennai getting a salary of Rs. 15000 per
month. I Thank NSIC for giving me this opportunity.
I A.V.R Praveen did course in Certified Automation
Engineering with HMI at NSIC for a period from 7.9.2017
to 6.10.2017. This course was very useful for me. Iam
working as Project Engineer in M/s. Plant Control &
Automation Techniques , Chennai getting a salary of Rs.
1.44 lacs per annum. I Thank NSIC for giving me this
I P. Anandha kumar did course in Embedded Hardware
Developer” at NSIC for a period from 5.10.2017 to
27.11.2017. This course was very useful for me. Iam
working RTG Technician in M/s. Sanco Container Freight
Station, Chennai getting a salary of Rs. 15000 per month. I
Thank NSIC for giving me this opportunity.
R. Nevedha did course in Embedded Hardware Developer”
at NSIC for a period from 8.11.2017 to 12.122017. This
course was very useful for me. Iam working as Testing
Engineer in M/s. Venkateswara Electrical Industries Chennai
getting a salary of Rs. 11500 per month. I Thank NSIC for
giving me this opportunity.
I, P. Uma Mageswari did course in Embedded Hardware
Developer” at NSIC for a period from 8.11.2017 to
12.122017. This course was very useful for me. Iam
working as R & D Trainee in M/s. Pulsars, Chennai getting a
salary of Rs. 11500 per month. I Thank NSIC for giving me
this opportunity.
I, P. Tamilarasi did course in Embedded Hardware
Developer” at NSIC for a period from 8.11.2017 to
12.122017. This course was very useful for me. Iam
working as Data Management in M/sV&T Infrastructure
getting a salary of Rs. 8500 per month. I Thank NSIC for
giving me this opportunity.
I, A. Chokalingam did course in Embedded Hardware
Developer” at NSIC for a period from 8.11.2017 to
12.122017. This course was very useful for me. Iam working
as Testing Engineer in M/.Avitronics System Tech Pvt Ltd,
Bangalore getting a salary of Rs. 1.2 lacs per annum. I
Thank NSIC for giving me this opportunity.
I, G. Nithya Bharathi did course in Embedded Hardware
Developer” at NSIC for a period from 11.10.2017 to
14.11.2017 . This course was very useful for me. Iam
working as Frontend Developer in M/.Avitronics System
Tech Pvt Ltd, Bangalore getting a salary of Rs. 14,000 per
month. I Thank NSIC for giving me this opportunity.
I, P. Jeyachandran did course in Embedded Hardware
Developer” at NSIC for a period from 11.10.2017 to
14.11.2017 . This course was very useful for me. Iam
working as Trainee in M/s.Waltech , Banglaore getting a
salary of Rs. 1.2lacs per annum. I Thank NSIC for giving me
this opportunity.
I, D.L.Prakash did course in Embedded Hardware
Developer” at NSIC for a period from 11.10.2017 to
14.11.2017 . This course was very useful for me. Iam
working as Design Engineer in M/s.Procon Inst Pvt Ltd,
getting a salary of Rs. 1.5lacs per annum. I Thank NSIC for
giving me this opportunity.
I, V. Lakshmi Narayana did course in Embedded Hardware
Developer” at NSIC for a period from 5.7.2017 to 1.8.2017 .
This course was very useful for me. Iam working as
Engineer in M/s. Mpower Automation getting a salary of
Rs. 2.42 lacs per annum. I Thank NSIC for giving me this
opportunity.
I, V. M.Anand did course in Embedded Hardware
Developer” at NSIC for a period from 18.2.2018 to
25.3.2018 . This course was very useful for me. Iam
working as Sales manager in M/s. Shriram chit fund pvt
ltd. getting a salary of Rs. 1.56 lacs per annum. I Thank
NSIC for giving me this opportunity.
I, P. Dhanasekar did course in UPS and Inverter” at NSIC
for a period from 26.4.2017 to 13.6.2017 . This course
was very useful for me. Iam working as Electrical
Technician in M/s. ISC-Faculty Services Chennai getting a
salary of Rs. 1.2 lacs per annum. I Thank NSIC for giving
me this opportunity.
I, S. Thenmozhi did course Embedded Hardware
Developer” at NSIC for a period from 5.12.2017 to
5.1.2018 . This course was very useful for me. Iam
working as faculty in M/s. Educomp Solution, Chennai
getting a salary of Rs. 1.2 lacs per annum. I Thank NSIC
for giving me this opportunity.
I, S.Muralidharan did course Embedded Hardware
Developer” at NSIC for a period from 5.12.2017 to 5.1.2018
. This course was very useful for me. Iam working as
Product testing operator in M/s. Venture Power system,
Chennai getting a salary of Rs. 118,000 per year. I Thank
NSIC for giving me this opportunity.
I M. Satish did course Tool Design” at NSIC for a period
from 5.2.2017 to 28.4.2017 . This course was very useful
for me. Iam working as Quality engineer in M/s. Educomp
Solution, Chennai getting a salary of Rs. 12,000 per
month. I Thank NSIC for giving me this opportunity.
I E.P. Gunaseelan did course Catia 7000” at NSIC for a
period from 16.11.2017 to 8.12.2017 . This course was
very useful for me. Iam working as CNC operator in M/s.
Super Auto forging, Chennai getting a salary of Rs. 90,000
per year. I Thank NSIC for giving me this opportunity.
I, K. Shiva did course ” CATIA at NSIC for a period from
18.9.2017 to 17.10.2018 . This course was very useful for me.
Iam working as Assembly in M/s. NCR Corporation of India
pvt. Ltd, Chennai getting a salary of Rs. 118,000 per year. I
Thank NSIC for giving me this opportunity.
I, V. Gopinath did course ” Embedded Hardware
Developer at NSIC for a period from 3.1.2018 to
6.2.2018 . This course was very useful for me. Iam
working as Service engineer in M/s. Avalan Technologies
pvt ltd, Chennai getting a salary of Rs. 1.32 lacs per year.
I Thank NSIC for giving me this opportunity.
I, v.Geethapriya did course ” Embedded Hardware
Developer at NSIC for a period from 3.1.2018 to 6.2.2018 .
This course was very useful for me. Iam working as IRO in
M/s. Just Dial Chennai getting a salary of Rs. 1.00 lacs per
year. I Thank NSIC for giving me this opportunity.
I, Mohana Sundaram did course Certified Automation
Engineer at NSIC for a period from 3.9.2017 to 6.11.2017 .
This course was very useful for me. Iam working as Project
engineer in M/s. Plant control & Automation Technologies
Chennai getting a salary of Rs. 11.00 lacs per year. I Thank
NSIC for giving me this opportunity.
I, S.Swetha did ” Engineering project at NSIC for a period
from 8.1.2018 to 21.2.2018. This projects is very useful for
me. I am working as Software engineer in M/s. HSBC Bank
Chennai getting a salary of Rs. 7.00 per year. I Thank NSIC
for giving me this opportunity.
I R. Vanishree did ” Engineering project at NSIC for a
period from 8.1.2018 to 21.2.2018. This projects is very
useful for me. Iam working as Software engineer in M/s.
BOSCH, Chennai getting a salary of Rs. 4.00 per year. I
Thank NSIC for giving me this opportunity.
I G. Sriranjani did ” Engineering project at NSIC for a
period from 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as Instrumentation engineer in
M/s. Honeywell Chennai getting a salary of Rs. 25,000 per
month. I Thank NSIC for giving me this opportunity.
I Vidyadevi V. did ” Engineering project at NSIC for
a period 11.1.2018 to 29.1.2018. This projects is
very useful for me. Iam working as Gradute engineer
in M/s. SRM Technologies pvt ltd Chennai getting a
salary of Rs. 20,000 per month. I Thank NSIC for
giving me this opportunity.
I Sruthi B. did ” Engineering project at NSIC for a
period 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as Graduate engineer in
M/s. SRM Tata Consultancy Services, Ahmadabad
getting a salary of Rs. 20,000 per month. I Thank NSIC
for giving me this opportunity.
I Sudharsan S.. did ” Engineering project at NSIC for a
period 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as Graduate engineer in
M/s. Johnson Controls Private Limited,Pune getting a
salary of Rs. 3.5 lacs per year. I Thank NSIC for giving
me this opportunity.
I R.Menaka. did ” Engineering project at NSIC for a
period 1.3.2018 to 21.3.2018. This projects is very
useful for me. Iam working as Software engineer in M/s.
Neeyamo Enterprise Solutions Pvt Ltd,Madurai getting a
salary of Rs. 2.2 lacs per year. I Thank NSIC for giving
me this opportunity.
I S. Reshma did ” Engineering project at NSIC for a
period 1.3.2018 to 21.3.2018. This projects is very
useful for me. Iam working as Software engineer in M/s.
IBM Bangalore getting a salary of Rs. 3.2 lacs per year. I
Thank NSIC for giving me this opportunity.
I B. Madhupatil did ” Engineering project at NSIC for a
period 1.3.2018 to 21.3.2018. This projects is very
useful for me. Iam working as Executive engineer in
M/s. KRG Technologies pvt ltd Chennai getting a salary of
Rs.17,000 per month. I Thank NSIC for giving me this
opportunity.
I Sneha kumari did ” Engineering project at NSIC for a
period 1.3.2018 to 21.3.2018. This projects is very useful
for me. Iam working as Network engineer in M/s. DXC
Technology DLF Chennai getting a salary of Rs.20,000 per
month. I Thank NSIC for giving me this opportunity.
I, Veena Mishra did ” Engineering project at NSIC for a
period 1.2.2018 to 21.2.2018. This projects is very useful
for me. Iam working as Network engineer in M/s. Ernst &
Young LLP, Chennai getting a salary of Rs.18,000 per
month. I Thank NSIC for giving me this opportunity.
I, S.Subakshya did ” Engineering project at NSIC for a
period 1.2.2018 to 21.2.2018. This projects is very useful
for me. Iam working as Software engineer in M/s. TCS,
Chennai getting a salary of Rs.3.5lacs per annum. I Thank
NSIC for giving me this opportunity.
I, Shaik Anees did ” Engineering project at NSIC for a
period 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as Software engineer in M/s.
Sriram Values Chennai, getting a salary of Rs.20,000 per
month. I Thank NSIC for giving me this opportunity.
I, T.V. Nithish did ” Engineering project at NSIC for a
period 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as Engineer in M/s. Nouveau
Lab pvt ltd. Chennai, getting a salary of Rs.16,000 per
month. I Thank NSIC for giving me this opportunity.
I Swathe P.M. did ” Engineering project at NSIC for a
period 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as Software Engineer in M/s.
TCS, Chennai, getting a salary of Rs.28,000 per month. I
Thank NSIC for giving me this opportunity.
I Surya R. did ” Engineering project at NSIC for a
period 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as Engineer in M/s. Vuram
Technology Solutions , Chennai, getting a salary of
Rs.18,000 per month. I Thank NSIC for giving me
this opportunity.
I Sree Charan N. did ” Engineering project at NSIC
for a period 11.1.2018 to 29.1.2018. This projects is
very useful for me. Iam working as Engineer in M/s.
TCS, Chennai, getting a salary of Rs.25,000 per month.
I Thank NSIC for giving me this opportunity.
I Shruthy . did ” Engineering project at NSIC for a
period 11.1.2018 to 29.1.2018. This projects is very
useful for me. Iam working as System Engineer in M/s.
Infosys, Chennai, getting a salary of Rs.18,000 per
month. I Thank NSIC for giving me this opportunity.
I Suraj Rajagopal . did ” Engineering project at NSIC
for a period 1.2.2018 to 21.2.2018. This projects is very
useful for me. Iam working as trainee in M/s. TCS
Chennai, getting a salary of Rs.3.5 lacs per annum. I
Thank NSIC for giving me this opportunity.
I M.Vijay did ” Engineering project at NSIC for a period
1.2.2018 to 21.2.2018. This projects is very useful for
me. Iam working as Semi voice in M/s. UTL Global
Solutions, getting a salary of Rs. 10,000 per month. I
Thank NSIC for giving me this opportunity.
I K. Sathya narayanan did ” Engineering project at NSIC
for a period 24.1.2018 to 12.2.2018. This projects is
very useful for me. Iam working as Executive Engineer in
M/s.Congnizant Chennai getting a salary of Rs. 3.25 lacs
per annum. I Thank NSIC for giving me this opportunity.
I J. Sriram did ” Engineering project at NSIC for a period
24.1.2018 to 12.2.2018. This projects is very useful for
me. Iam working as Data Associate in M/s.HCL
Technologies Chennai getting a salary of Rs. 22000 per
month. I Thank NSIC for giving me this opportunity.
K.R. Visakan ” Engineering project at NSIC for a period
24.1.2018 to 12.2.2018. This projects is very useful for
me. Iam working as Trainee in M/s.SRM Infotech Solutions
Chennai getting a salary of Rs. 15,000 per month. I Thank
NSIC for giving me this opportunity.
I, B. Koushik ” Engineering project at NSIC for a period
1.3.2018 to 21.3.2018. This projects is very useful for me.
Iam working as Software engineer in M/s.TCS Chennai
getting a salary of Rs. 3.35 per annum. I Thank NSIC for
giving me this opportunity.
I, C. Gayathri ” Engineering project at NSIC for a period
1.2.2018 to 21.2.2018. This projects is very useful for
me. Iam working as Data Analyst in M/s.Accenture
Chennai getting a salary of Rs. 16,000 per month. I
Thank NSIC for giving me this opportunity.
I, P. Sithra ” Engineering project at NSIC for a period
1.2.2018 to 21.2.2018. This projects is very useful for
me. Iam working as Graduate Trainee in M/s.
Sutherlands Chennai getting a salary of Rs. 12,000 per
month. I Thank NSIC for giving me this opportunity.
I, S. Abhinaya ” Engineering project at NSIC for a
period 1.2.2018 to 21.2.2018. This projects is very
useful for me. Iam working as Testing Engineer in
M/s. Flextronics Chennai getting a salary of Rs. 15,000
per month. I Thank NSIC for giving me this
opportunity.
I, Sathish Kumar J. ” Engineering project at NSIC for a
period 24.1.2018 to 12.2.2018. This projects is very
useful for me. Iam working as Data Associate in M/s.
Amazon India , Chennai getting a salary of Rs. 15,000 per
month. I Thank NSIC for giving me this opportunity.
I, Sudhanva M.R. ” Engineering project at NSIC for a
period 24.1.2018 to 12.2.2018. This projects is very
useful for me. Iam working as Graduate Engineer Trainee
in M/s. Infor India Pvt Ltd. , Chennai getting a salary of
Rs. 17,000 per month. I Thank NSIC for giving me this
opportunity.
I, Swathi P. ” Engineering project at NSIC for a period
24.1.2018 to 12.2.2018. This projects is very useful for
me. Iam working as Graduate Engineer Trainee in M/s.
Sutherland Global Services, Chennai getting a salary of
Rs. 15,000 per month. I Thank NSIC for giving me this
opportunity.
I, G.Sivamani did course in” CNC Turning ” at NSIC for
a period from from 3.7. 2017 to 24.8.2017. Iam
working as CNC Operator at M/s. Indian Psiton limited
, and getting a pay of Rs. 10,000/- per month. I thank
NSIC for giving me useful training.
I, L. Samson did course in” 3D Design Modeller ” at
NSIC for a period from 6. 3.2017 to 28.4.2017. I am
working as Supervisor at M/s. New Age Software
solution and getting a pay of Rs. 8,000/- per month. I
thank NSIC for giving me useful training.
I, A Ravindar did course in” CNC Turning ” at NSIC for a
period from 3.7. 2017 to 24.8.2017. Iam working as
Sales Executive at M/s. Godrek , Chennai, and getting a
pay of Rs. 9500/- per month. I thank NSIC for giving me
useful training.
I,P.Sundar did course in” CNC Turning” at NSIC for a
period from 3 .7. 2017 to 24.8.2017. Iam working as
Interior Designer at M/s. FMT Pvt ltd , and getting a
pay of Rs. 8500/- per month. I thank NSIC for giving
me useful training.
I, S.Prakash course in” CNC Turning” at NSIC for a
period from 3 .7. 2017 to 24.8.2017. Iam working as
Production Engineer at M/s. Brigh lite Pvt Ltd,
Chennai, and getting a pay of Rs. 12,000/- per month. I
thank NSIC for giving me useful training.
I, James did course in” CNC Turning” at NSIC for a
period from 3 .7. 2017 to 24.8.2017 Iam working as
Assistant at M/s. Sanjay Engineering , Chennai, and
getting a pay of Rs. 10,000/- per month. I thank NSIC
for giving me useful training.
I, Ganeshkumar J did course in” 3D Design Modeller ” at
NSIC for a period from 6. 3.2017 to 28.4.2017. Iam
working as Technician at M/s. Sundaram Industries,
Sivakasi, and getting a pay of Rs. 10,000/- per month. I
thank NSIC for giving me useful training.
I, M. Siva did course in” 3D Design Modeller ” at NSIC
for a period from 26. 4.2017 to 28.5.2017. Iam
working as Service Engineer at M/s. Westron
Solutions, Chennai and getting a pay of Rs. 12000/- per
month. I thank NSIC for giving me useful training.
I, S.Vigneswaran did course in” 3D Design Modeller ” at
NSIC for a period from 26. 4.2017 to 28.5.2017. Iam
working as Engineer-Control Room at M/s. Ocean
power plant, and getting a pay of Rs. 15000/- per
month. I thank NSIC for giving me useful training.
I L.Manikandan did course in” CNC Turning” at NSIC
for a period from 3 .7. 2017 to 24.8.2017. Iam working
as CNC operator at M/s.S.R.Engineering, Chennai, and
getting a pay of Rs. 8,000/- per month. I thank NSIC for
giving me useful training.
I, R.Maria Vishak did course in” CNC Turning ” at NSIC
for a period from 7. 8.2017 to 28.9.2017. Iam working
as Service Engineer at M/s. Westron Solutions,
Chennai and getting a pay of Rs. 12000/- per month. I
thank NSIC for giving me useful training.
I, D. Balaji course in” CNC Vertical Machine Centre” at
NSIC for a period from 6. 2.2017 to 28.4.2017. Iam
working as Service Engineer at M/s. Gestamp
Automotive Chennai pvt ltd and getting a pay of Rs.
12000/- per month. I thank NSIC for giving me useful
training.
I, Anthony course in” CNC Vertical Machine Centre” at
NSIC for a period from 6. 2.2017 to 28.4.2017. Iam
working as Engineer at M/s. Roop International,
Seriperumbattur and getting a pay of Rs. 12000/- per
month. I thank NSIC for giving me useful training.
I, Bala Murugan course in” CNC Vertical Machine
Centre” at NSIC for a period from 6. 2.2017 to
28.4.2017. Iam working as Engineer at M/s. Auro
Technology , Thirumudivakkam and getting a pay of Rs.
12000/- per month. I thank NSIC for giving me useful
training.
I, Santhosh Kumar C. course in” CNC Vertical Machine
Centre” at NSIC for a period from 26. 4.2017 to
20.6.2017. Iam an Entreprenuer doing own business
Santhosh Workshop and getting a pay of Rs. 20000/-
per month. I thank NSIC for giving me useful training.
I, K. Manikandan course in” CNC Vertical Machine
Centre” at NSIC for a period from 26. 4.2017 to
20.6.2017. Iam as Engineer in M/s. Velam Engineering
Works, Chennai and getting a pay of Rs. 10000/- per
month. I thank NSIC for giving me useful training.
I, S. Thaufic course in” CNC Vertical Machine Centre” at
NSIC for a period from 26. 4.2017 to 20.6.2017. Iam
working as Engineer in M/s. Ezekiel realestate Maraimalai
nagar and getting a pay of Rs. 10000/- per month. I thank
NSIC for giving me useful training.
I, P. Kalidass course in” CNC Vertical Machine Centre” at
NSIC for a period from 26. 4.2017 to 20.6.2017. Iam
working as supervisor in M/s. Garuda Machining works,
Chennai and getting a pay of Rs. 10000/- per month. I
thank NSIC for giving me useful training.
I, K. Venkatesan course in” CNC Vertical Machine
Centre” at NSIC for a period from 29. 5.2017 to
21.7.2017. Iam working as Engineer in M/s. Multitech
Engineering, Chennai and getting a pay of Rs. 12000/-
per month. I thank NSIC for giving me useful training.
I, S. Thiyagarajan course in” CNC Vertical Machine
Centre” at NSIC for a period from 3. 7.2017 to
24.8.2017. Iam working as Engineer in M/s.
Rajalakshmi Engineering works, Chennai and getting a
pay of Rs. 10000/- per month. I thank NSIC for giving me
useful training.
I, S. Thanigaivel course in” CNC Vertical Machine
Centre” at NSIC for a period from 3. 7.2017 to
24.8.2017. Iam working as Engineer in M/s.
Coromandal International Chennai and getting a pay of
Rs. 12,000/- per month. I thank NSIC for giving me
useful training.
IM. Sakthi Priyan course in” CNC Vertical Machine
Centre” at NSIC for a period from 3. 7.2017 to
24.8.2017. Iam working as Engineer in M/s. Universal
Engineers, Chennai and getting a pay of Rs. 12,000/- per
month. I thank NSIC for giving me useful training.
I, B. Umesh Kannan course in” CNC Vertical Machine
Centre” at NSIC for a period from 3. 7.2017 to
24.8.2017. Iam working as Technician in M/s. Supreme
Manufacturing Prur Chennai and getting a pay of Rs.
10,000/- per month. I thank NSIC for giving me useful
training.
I, S. Ganesh course in” CNC Vertical Machine Centre” at
NSIC for a period from 3. 7.2017 to 24.8.2017. Iam
working as Engineer in M/s. TVS Tyres, Chennai and
getting a pay of Rs. 12,000/- per month. I thank NSIC for
giving me useful training.
I, S.Sathish Kumar course in” CNC Vertical Machine Centre”
at NSIC for a period from 3. 7.2017 to 24.8.2017. Iam
working as Engineer in M/s. SMK Engineering , Padi,
Chennai and getting a pay of Rs. 10,000/- per month. I
thank NSIC for giving me useful training.
I, K. Vinoth course in” CNC Vertical Machine Centre” at NSIC
for a period from 3. 7.2017 to 24.8.2017. Iam working as
Engineer in M/s. Ashok Leyland, Chennai and getting a pay
of Rs. 12,000/- per month. I thank NSIC for giving me useful
training.
I, D. Tamil mani course in” CNC Vertical Machine Centre” at
NSIC for a period from 3. 7.2017 to 24.8.2017. Iam
running own business as M/s. Tamilmani Hardwares and
getting a pay of Rs. 25,000/- per month. I thank NSIC for
giving me useful training.
I, V.Vipin Kumar course in” CNC Vertical Machine Centre” at
NSIC for a period from 3. 7.2017 to 24.8.2017. Iam working
as Engineer in M/s. Prime Industries, Karur and getting a
pay of Rs. 10,000/- per month. I thank NSIC for giving me
useful training.
I, V. Kavimuhil course in” CNC Vertical Machine Centre”
at NSIC for a period from 3. 7.2017 to 24.8.2017. Iam
working as Service Engineer in M/s. Hyundai Service
Centre and getting a pay of Rs. 10,000/- per month. I
thank NSIC for giving me useful training.
I, Mohammed Suhail I course in” CNC Vertical Machine
Centre” at NSIC for a period from 7.8.2017 to
28.9.2017. Iam working as Trainee in M/s. Royal
Enfield and getting a pay of Rs. 10,000/- per month. I
thank NSIC for giving me useful training.
I E. Mani Vannan course in” CNC Vertical Machine
Centre” at NSIC for a period from 7.8.2017 to
28.9.2017. Iam working as supervisor in M/s. Naga
Fitting Tools Ambattur Chennai and getting a pay of Rs.
10,000/- per month. I thank NSIC for giving me useful
training.
I G. Dinesh Kumar course in” CNC Vertical Machine
Centre” at NSIC for a period from 7.8.2017 to
28.9.2017. Iam working as Engineer in M/s. DPN
Tools Ambattur Chennai and getting a pay of Rs.
10,000/- per month. I thank NSIC for giving me useful
training.
I K. Dhanasekaran course in” CNC Vertical Machine
Centre” at NSIC for a period from 7.8.2017 to
28.9.2017. Iam working as Engineer in M/s. Premier
Machine Tools Ambattur Chennai and getting a pay of
Rs. 12,000/- per month. I thank NSIC for giving me
useful training.
I R. Praveen course in” CNC Vertical Machine Centre”
at NSIC for a period from 7.8.2017 to 28.9.2017. Iam
working as supervisor in M/s. Excel Waterjet Cutting
Chennai and getting a pay of Rs. 10,000/- per month.
I thank NSIC for giving me useful training.
I M.V. Vishnu course in” CNC Vertical Machine Centre” at
NSIC for a period from 18.9.2017 to 10.11.2017. Iam
working as supervisor in M/s. Prasad NC Machine system
pvt ltd Chennai and getting a pay of Rs. 8,000/- per
month. I thank NSIC for giving me useful training.
I A. Sriraman course in” CNC Vertical Machine Centre” at
NSIC for a period from 11.10.2017 to 5.12.2017. Iam
working as Engineer in M/s. Machine Tools Automation
and getting a pay of Rs. 8,000/- per month. I thank NSIC
for giving me useful training.
I R. Seshathri course in” CNC Vertical Machine Centre” at
NSIC for a period from 8.11.2017 to 2.1.2018. Iam
working as Engineer in M/s. Sai Auto Components and
getting a pay of Rs. 10,000/- per month. I thank NSIC for
giving me useful training.
I M. Rishikesh course in” CNC Vertical Machine Centre” at
NSIC for a period from 4.12.2017 to 25.1.2018. Iam
working as Engineer in M/s. Zetek Castings Chennai and
getting a pay of Rs. 10,000/- per month. I thank NSIC for
giving me useful training.
I Esakkimuthu S course in” Tool Designer” at NSIC for a
period from 6.2.2017 to 13.4.2017. Iam working as Site
Engineer in M/s. Win Group pvt ltd Chennai and getting a
pay of Rs. 10,000/- per month. I thank NSIC for giving me
useful training.
I Pradeep kumar course in” Tool Designer ” at NSIC for
a period from 6.2.2017 to 13.4.2017. Iam working as
Design Engineer in M/s. Grow Tech Innovations,
Bangalore Chennai and getting a pay of Rs. 12,000/- per
month. I thank NSIC for giving me useful training.
I, A. Krishna kumar did course in Programming and
operation in VMC ” at NSIC for a period from 8.11.2017
to 18.1.2018 . This course was very useful for me. Iam
working as operator in M/s.Eminent Engineering
getting a salary of Rs. 1.2lacs per annum. I Thank NSIC
for giving me this opportunity.
I, R. Sasi Kumar did course in CATIA Software ” at NSIC
for a period from 8.11.2017 to 10.12.2017 . This course
was very useful for me. Iam working as Quality Line
Inspector in M/s.Wonjin Auro Padrs India getting a
salary of Rs. 1.2lacs per annum. I Thank NSIC for giving
me this opportunity.
I, Thirumurugan N did course in Auto CAD Software ”
at NSIC for a period from 4.12.2017 to 4.1.2018 . This
course was very useful for me. Iam working as Quality
in M/s.Crostamp Automotive Pvt ltd. getting a salary of
Rs. 1.2lacs per annum. I Thank NSIC for giving me this
opportunity.
I, P. Mariadoss vinson did course in Auto CAD” at
NSIC for a period from 4.12.2017 to 4.1.2018 . This
course was very useful for me. Iam working as Mould
maker in M/s.Lalitha Enterprise getting a salary of
Rs. 1.2lacs per annum. I Thank NSIC for giving me
this opportunity.
I, C. Sundarapandian did course in CNC VMC
Programming” at NSIC for a period from 10.10.2017
to 7.12.2017 . This course was very useful for me. Iam
working as Junior Engineer in M/s.Delphi TVS
Sriperumbattur getting a salary of Rs. 1.5 lacs per
annum. I Thank NSIC for giving me this opportunity.
M. Arun Kumar did course in Auto cad” at NSIC for a
period from 8.11.2017 to 7.1.2018 . This course was very
useful for me. Iam working as Quality Line Inspector in
M/s.Delphi TVS Sriperumbattur getting a salary of Rs.
1.5 lacs per annum. I Thank NSIC for giving me this
opportunity.
M. R. Praveen did course in Auto cad” at NSIC for a period
from 7.9.2017 to 16.10.2018 . This course was very useful
for me. Iam working as Machine Shop supervisor in M/s.
Kumaran Engineering Pvt Ltd getting a salary of Rs. 1.32
lacs per annum. I Thank NSIC for giving me this
opportunity.
I, M. Vignesh did course in CREO and CAD software” at
NSIC for a period from 6.3.2017 to 12.5.2017 . This course
was very useful for me. Iam working as PDI Inspector in
M/s. Esteem Polymers pvt ltd. , getting a salary of Rs.
10,000 per month. I Thank NSIC for giving me this
opportunity.
I, K. Rajaram did course in Auto CAD software” at NSIC
for a period from 3.7.2017 to 24.8.2017 . This course was
very useful for me. Iam working as Quality COntrol in M/s.
Sadhan Tool Room Ltd Chennai , getting a salary of Rs.
25,000 per month. I Thank NSIC for giving me this
opportunity.
I, P. Vignesh did course CNC Turning ” at NSIC for a
period from 1.7.2017 to 31.8.2017 . This course was
very useful for me. Iam working as Graduate Trainee in
M/s. Renault Nissan Chennai , getting a salary of Rs.
1.32 lacs per annum. I Thank NSIC for giving me this
opportunity.
I, Bhrani Ganesh S did course Autocad ” at NSIC for a
period from 8.11.2017 to 2.1.2018 . This course was
very useful for me. Iam working as NDP Engineer in
M/s. Baleshwar Automobiles, Chennai , getting a salary
of Rs. 0.90 lacs per annum. I Thank NSIC for giving me
this opportunity.
I, M. Senthil did course Autocad ” at NSIC for a period
from 18.9.2017 to 10.11.2017 . This course was very
useful for me. Iam working as CNC Operator in M/s.
Rini Machine pvt Ltd Coimbatore , getting a salary of
Rs. 1.20 lacs per annum. I Thank NSIC for giving me
this opportunity.
I, S. Manoj Kumar did course Autocad ” at NSIC for a
period from 6.3.2017 to 28.4.2017. This course was
very useful for me. Iam working as System admn in
M/s. Intel system pvt ltd. Chennai , getting a salary of
Rs. 10000 per month. I Thank NSIC for giving me this
opportunity.
I, Shahul Hameed did course Tool Designer using CAM ”
at NSIC for a period from 4.7.2017 to 8.9.2017 . This
course was very useful for me. Iam working as Trainee
in M/s. Cuuro Motors Chennai , getting a salary of Rs.
1.20 lacs per annum. I Thank NSIC for giving me this
opportunity.
I, A. Thiruvel Kumaran did course CNC with Cad CAM ”
at NSIC for a period from 13.11.2017 to 12.12.2017 .
This course was very useful for me. Iam working as
Design Engineer in M/s. K.K. Permal and Company,
Chennai , getting a salary of Rs. 1.40 lacs per annum. I
Thank NSIC for giving me this opportunity.
I, P.N.Naseer Ahmed did course Auto Cad ” at NSIC for a
period from 13.9.2017 to 10.11.2017 . This course was very
useful for me. Iam working as Graduate Engineer Trainee in
M/s. KPT Power Tools, Chennai , getting a salary of Rs. 8000
per month. I Thank NSIC for giving me this opportunity.
I, Vikramanadh Sudhakar did course “CNC with Cad Cam ”
at NSIC for a period from 6.11.2017 to 5.12.2017 . This
course was very useful for me. Iam working as Draughtsman
in M/s. Dakshin Plant Engineering Consultant pvt ltd.
Chennai , getting a salary of Rs. 1.80 lacs per annum. I
Thank NSIC for giving me this opportunity.
I, J. Rajasekaran did course “Autocad & Mastercam ” at
NSIC for a period from 7.8.2017 to 1.9.2017 . This course
was very useful for me. Iam working as Junior Engineer
(Assembly) in M/s. Pnue Tech Industries , getting a salary
of Rs. 8000 per month. I Thank NSIC for giving me this
opportunity.
I, M. Selvam did course “Autocad” at NSIC for a period
from 6.3.2017 to 28.4.2017 . This course was very useful
for me. Iam working as Autocad designer in M/s.
Greenland services pvt ltd , getting a salary of Rs. 10500
per month. I Thank NSIC for giving me this opportunity.
I, G.Palani did course “Autocad” at NSIC for a period
from 6.3.2017 to 28.4.2017 . This course was very useful
for me. Iam working as supervosir in M/s. Vezhi
Industrial Estate getting a salary of Rs. 8000 per month.
I Thank NSIC for giving me this opportunity.
I, A.Rajakumar did course “Autocad” at NSIC for a
period from 6.3.2017 to 28.4.2017 . This course was
very useful for me. Iam working as Technician in M/s.
Super auto forging Chennai getting a salary of Rs.
15000 per month. I Thank NSIC for giving me this
opportunity.
I K.Ashok Kannan did course “Autocad” at NSIC for a
period from 11.10.2017 to 5.12.2017 . This course was
very useful for me. Iam working as Junior engineer in
DKS Steel Pvt Ltd getting a salary of Rs. 10000 per
month. I Thank NSIC for giving me this opportunity.
I M. Maheshwaran did course “Autocad” at NSIC for
a period from 4.12.2017 to 25.1.2018 . This course
was very useful for me. Iam working as Marketing
executive in M/s. AC Care pvt ltd Chennai getting a
salary of Rs. 8500 per month. I Thank NSIC for giving
me this opportunity.
I M. Yoganath did course “Autocad” at NSIC for a
period from 4.12.2017 to 25.1.2018 . This course
was very useful for me. Iam working as Assistant in
M/s. Lloyed pvt ltd , Ambur Chennai getting a salary
of Rs. 8000 per month. I Thank NSIC for giving me
this opportunity.
I K.Subramani did course “Autocad” at NSIC for a
period from 6.3.2017 to 28.4.2017 . This course was
very useful for me. Iam working as Faculty in Maharaja
Engineering College, Coimbatore getting a salary of Rs.
15000 per month. I Thank NSIC for giving me this
opportunity.
I P.Perumal did course “Autocad” at NSIC for a
period from 4.12.2017 to 25.1.2018 . This course was
very useful for me. Iam working as Assembler in M/s.
Aqua Group Coimbatore getting a salary of Rs. 10500
per month. I Thank NSIC for giving me this
opportunity.
I K. Akilan did course “3D Design Modeller” at NSIC
for a period from 26.4.2017 to 21.6.2018 . This course
was very useful for me. Iam working as Designer in
M/s. Design Desk India Pvt ltd, Chennai getting a
salary of Rs. 10000 per month. I Thank NSIC for
giving me this opportunity.
I A Suresh did course “3D Design Modeller” at NSIC
for a period from 26.4.2017 to 21.6.2018 . This course
was very useful for me. Iam working as technician in
M/s.Design Tech system ltd, Chennai getting a salary
of Rs. 11000 per month. I Thank NSIC for giving me
this opportunity.
I G. Prakash did course “3D Design Modeller” at
NSIC for a period from 26.4.2017 to 21.6.2018 . This
course was very useful for me. Iam working as
technician in M/s.Axis Engineering ,Chennai getting
a salary of Rs. 12000 per month. I Thank NSIC for
giving me this opportunity.
I, Nithyaraj did course “CAD” at NSIC for a period
from 2.3.2018 to 3.3.2018 . This course was very
useful for me. Iam working as trainee in M/s.TVS
Sundaram Fastners ,Chennai getting a salary of Rs.
10000 per month. I Thank NSIC for giving me this
opportunity.
I, N. Rajapandiyan did course ” Auto CAD at NSIC for
a period from 1.2.2018 to 2.3.2018. This course was
very useful for me. Iam working as Assembly
maintenance in M/s. Titan Chennai getting a salary of
Rs. 11,000 per month. I Thank NSIC for giving me this
opportunity.
I, N. Rajapandiyan did ” Engineering Project in NSIC
for a period from 1.3.2018 to 21.3.2018. This project
was very useful for me. I got a job in IBM Bangalore
getting a salary of Rs. 18,000 per month. I Thank NSIC
for giving me this opportunity.
I, J. Shyamala did ” Engineering Project in NSIC for a
period from 1.3.2018 to 21.3.2018. This project was
very useful for me. I got a job as Trainee in Accenture
Chennai getting a salary of Rs. 12,000 per month. I
Thank NSIC for giving me this opportunity.
I S. Srivarsha did ” Engineering Project in NSIC for a
period from 1.3.2018 to 21.3.2018. This project was
very useful for me. I got a job as Engineer in Infosys
Mysore getting a salary of Rs. 12,000 per month. I
Thank NSIC for giving me this opportunity.
I R. Ajay Krishnan did ” Engineering Project in NSIC
for a period from24.1.2018 to 12.2.2018. This project
was very useful for me. I got a job as Software
Engineer in Virtusa Hyderabad getting a salary of Rs.
20,000 per month. I Thank NSIC for giving me this
opportunity.
I P.V. Indu did ” Engineering Project in NSIC for a
period from24.1.2018 to 12.2.2018. This project was
very useful for me. I got a job as Quality Analyst in
Amazon getting a salary of Rs. 15,000 per month. I
Thank NSIC for giving me this opportunity.
NSIC TECHNICAL SERVICES CENTRE, CHENNAI-32.
Success Stories -2
I V.P.Balaji did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from 20.09.2017
to 31.10.2017. This course was very useful for me. Now I am
running a MSME unit called "Balaji toolcraft". I Thank NSIC for
giving me this opportunity.
I P.Jagadeesan did did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a period
from 20.09.2017 to 31.10.2017. This course was very useful
for me. Now I am working in T. Nagar Times as DTP designer
and I am earning Rs 20000/-.per month. I Thank NSIC for
giving me an opportunity.
I Santhosh did course in” Image processing using Raspberry
pi” at NSIC for a period from 11.10.2017 to 10.11.2017. This
course was very useful for me. Now I am working in M/s. Point
Perfect Technology Services, Coimbatore as Desktop support
engineer and getting a pay of Rs.15000/-p.m. I Thank NSIC for
giving me this opportunity.
I S.Perumal Swamy did course in” Field Technician -UPS ” at
NSIC for a period from 6.3.2017 to 21.4.2017. This course was
very useful for me. Now I am working in M/s. Accel Frontline
Private Limited. Chennai , as Senior IT support engineer and
getting a pay of Rs.25,000/-p.m. I Thank NSIC for giving me
this opportunity.
I C.Sundara pandian did” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a period
from 20.09.2017 to 31.10.2017. This training was very useful
for me. Now I am working in M/s. JBM Auto systems. Chennai ,
as supervisor and getting a pay of Rs.16,000/-p.m. I Thank
NSIC for giving me this opportunity.
I M.Manjula Devi did ” Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am working in Sharaba
constructions, Chennai and I am earning Rs 15000/- per
month. I Thank NSIC for conducting good course.
I K.RadhaKrishnan did ” Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am working in "PET bottle
Manufacturing"as operator and I am earning Rs 11000/- per
month. I Thank NSIC for conducting good course.
I A.Patha kumar did ” Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am running a business called
"QNET". I Thank NSIC for conducting good course.
I V.Pradeeb did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from
20.09.2017 to 31.10.2017. This training was very useful for
me. Now I am working in Maersk Liner Pvt. Ltd, Chennai and
I am earning Rs 15000/- per month. I Thank NSIC for
conducting good course.
I G.Dhiwakar did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from
20.09.2017 to 31.10.2017. This training was very useful for
me. Now I am working as Interiors designer and I am earning
Rs 15000/- per month. I Thank NSIC for conducting good
course.
I C.Nevaraj did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from
20.09.2017 to 31.10.2017. This training was very useful for
me. Now I am working in "Chennai Radha Pvt Ltd" and I am
earning Rs 12000/- per month. I Thank NSIC for conducting
good course.
I M.Kalaivanan did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017
to 31.10.2017. This training was very useful for me. Now I am
working in"Vasantha Mohana Rangaa Siddha Medical
Center "as siddha doctor and I am earning Rs 11000/- per
month. I Thank NSIC for conducting good course.
I D.Suresh Babu did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017
to 31.10.2017. This training was very useful for me. Now I am
working in "Orbit Systems" as Service engineer and I am
earning Rs 16000/- per month. I Thank NSIC for conducting
good course.
I V.Muthukumar did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017
to 31.10.2017. This training was very useful for me. Now I am
working in "VK Enterprises"as Proporiter and I am earning Rs
15000/- per month. I Thank NSIC for conducting good course.
I S.Vinoth Kumar did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017
to 31.10.2017. This training was very useful for me. Now I am
working in "Hanika Trading & Adavnce Systems" and I am
earning Rs 15000/- per month. I Thank NSIC for conducting
good course.
.
I K.Therasal did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017
to 31.10.2017. This training was very useful for me. Now I am
working in "Herba Health Pharma Naturals" and I am earning
Rs 12000/- per month. I Thank NSIC for conducting good
course.
I M.Karpagavalli did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017
to 31.10.2017. This training was very useful for me. Now I am
working in "GV Gem and Jewel" and I am earning Rs 11500/-
per month. I Thank NSIC for conducting good course.
I G.Govindarajan did ” Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am working in "Suriyan
Enterprises" and I am earning Rs 12000/- per month. I
Thank NSIC for conducting good course.
I J.Vians Xavier did ” Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am working in "Rabkoot
International Ltd" and I am earning Rs.12000/-per month. I
Thank NSIC for conducting good course.
I V.Thangavelu did ” Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am working in "Accenture
Solutions" as Image processing Analyst and I am earning
Rs.15000/-per month. I Thank NSIC for conducting good
course.
I K.Jaivelu did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from
20.09.2017 to 31.10.2017. This training was very useful for
me. Now I am working in "Q Power Technology" and I am
earning Rs.13000/-per month. I Thank NSIC for conducting
good course.
I J.David Raj did ” Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from
20.09.2017 to 31.10.2017. This training was very useful for
me. Now I am working in "Moses telecom" and I am earning
Rs.15000/-per month. I Thank NSIC for conducting good
course.
I Y.Venkateswarlu did ” Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am working in "TT Aviation"andI
am earning Rs.12000/-per month. I Thank NSIC for
conducting good course. I R.G.Rajkumar did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am working in "Hyundai Engg and
Construction " as Quality inspector and I am earning
Rs.1,00000/-per month. I Thank NSIC for conducting good
course.
I K.Karthik did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from
20.09.2017 to 31.10.2017. This training was very useful for
me. Now I am working as a freelancer in the field of
"Electrical panel manufacturing" and I am earning
Rs.25000/-per month.
Thank NSIC for conducting good course.
I Juli Margaret did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a
period from 20.09.2017 to 31.10.2017. This training was
very useful for me. Now I am running a MSME Unit called
"Ram Enterprises"and I am earning Rs.13000/-per month. I
Thank NSIC for conducting good course.
I C.Selvakumar did ” Image processing using Raspberry pi” at
NSIC for a period from 22.01.2018 to 21.02.2018. This training
was very useful for me. Now I am running a company called as
"Photon Energy Solutions" and I am earning Rs.25000/-per
month.
I R.Swamynathan did course in” Field Technician
(UPS&Inverter)” at NSIC for a period from 06.03.2017 to
21.04.2017. This course was very useful for me. Now I am
working in M/s. Exide Industries Ltd, Chennai as Support
engineer and getting a pay of Rs.20000/-p.m. I Thank NSIC
for giving me this opportunity.
G.Rajeshkumar did course in” Field Technician
(UPS&Inverter)” at NSIC for a period from 26.04.2017 to
13.06.2017. This course was very useful for me. Now I am
working in M/s. GRK Creations, Chennai as Engineer and
getting a pay of Rs.15000/-p.m. I Thank NSIC for giving me
this opportunity.
G.Mareeswaran did course in” Field Technician
(UPS&Inverter)” at NSIC for a period from 26.04.2017 to
13.06.2017. This course was very useful for me. Now I am
working in M/s. Exide Industries Ltd, Chennai as Support
engineer and getting a pay of Rs.20000/-p.m. I Thank NSIC
for giving me this opportunity.
N.Pathmanaban did course in” Field Technician
(UPS&Inverter)” at NSIC for a period from 29.05.2017 to
14.07.2017. This course was very useful for me. Now I am
working in M/s. L&T, Chennai as Engineer and getting a pay
of Rs.20000/-p.m. I Thank NSIC for giving me this
opportunity.
I P.Lakshmi Narayanan did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a
period from 30.10.2017 to 12.12.2017. This training was
very useful for me. Now I am running a MSME Unit called
"Jhanu Global Services" and I am earning Rs.3.5 lakhs per
annum. I Thank NSIC for conducting good training
programs.
I P.Sai Ganesh did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a
period from 30.10.2017 to 12.12.2017. This training was
very useful for me. Now I am working as Operations Head in
"Technomical Engineering Pvt Ltd" and I am earning Rs.8.5
lakhs per annum. I Thank NSIC for conducting good training
programs.
I S.Suresh Kumar did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a
period from 30.10.2017 to 12.12.2017. This training was
very useful for me. Now I am working as Driver in "Kumars
Travels" and I am earning Rs.4 lakhs per annum. I Thank
NSIC for conducting good training programs.
I A.Maria Susai did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a
period from 30.10.2017 to 12.12.2017. This training was
very useful for me. Now I am working as Web designer in
"Samuel Info Tech" and I am earning Rs.2 lakhs per annum.
I Thank NSIC for conducting good training programs.
I K.Narayanasamy did ” Advanced Integrated
Entrepreneurship Development Program” at NSIC for a period
from 30.10.2017 to 12.12.2017. This training was very useful for
me. Now I am running a shop called "L.N.Tailoring" and I am
earning Rs.1.2 lakhs per annum. I Thank NSIC for giving me this
opportunity.
I S.Rajasekar did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from 30.10.2017 to
12.12.2017. This training was very useful for me. Now I am
working as assistant in "Ultra Tech" and I am earning Rs.1.2 lakhs
per annum. I Thank NSIC for giving me this opportunity.
I T.Magesh did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from 30.10.2017 to
12.12.2017. This training was very useful for me. Now I am
working as Manager in "Sai Ram Party hall" and I am earning Rs.3
lakhs per annum. I Thank NSIC for giving me this opportunity.
I Nidhi Somani did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from 30.10.2017 to
12.12.2017. This training was very useful for me. Now I am
working as Store Manager in "SURUCMI, Amul Scooping Parlour"
and I am earning Rs.5 lakhs per annum. I Thank NSIC for giving
me this opportunity.
I M.Dinesh did ” Advanced Integrated Entrepreneurship
Development Program”” at NSIC for a period from 20.09.2017 to
31.10.2017. This training was very useful for me. Now I am
running a business called "Unick Xports" and I am earning Rs.5
lakhs per annum. I Thank NSIC for conducting good training
program.
I Jayaprakash did ” UPS/Inverter design” at NSIC for a period
from 28.06.2017 to 28.08.2017. This training was very useful for
me. Now I am running a business called "AS Ventures" and I am
earning Rs.5 lakhs per annum. I Thank NSIC for conducting good
training program.
I Ajith Kumar M did ”Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 08.01.2018 to
17.02.2018. This training was very useful for me. Now I am
working as executive in "HDSC Technologies" and I am earning
Rs.2.2 lakhs per annum. I Thank NSIC for conducting good
training program.
I K.Radha Krishnan did ”Advanced Integrated
Entrepreneurship Development Program” ” at NSIC for a period
from 20.09.2017 to 31.10.2017. This training was very useful for
me. Now I am working as Machine Operator in "PET Bottle
Manufacturing LTD" and I am earning Rs.1.8 lakhs per annum. I
Thank NSIC for conducting good training program.
I Dheebagan N did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from from
08.01.2018 to 17.02.2018. This training was very useful for me.
Now I am working as an executive in "SFL" and I am earning
Rs.2.7 lakhs per annum. I Thank NSIC for giving me this
opportunity.
I K.K. Raveena did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from from
08.01.2018 to 17.02.2018. This training was very useful for me.
Now I am working as an executive in "Amazon" and I am earning
Rs.2.3 lakhs per annum. I Thank NSIC for giving me this
opportunity.
I Madhu Shree V did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from from
08.01.2018 to 17.02.2018. This training was very useful for me.
Now I am working as an executive in "Tech Mahendra" and I am
earning Rs.2.7 lakhs per annum. I Thank NSIC for giving me this
opportunity.
I M.Kowsalya did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from from
08.01.2018 to 17.02.2018. This training was very useful for me.
Now I am working as an executive in "Intel Net" and I am earning
Rs.2.7 lakhs per annum. I Thank NSIC for giving me this
opportunity.
I K.Karthik did ”Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017 to
31.10.2017. This training was very useful for me. Now I am
working as Techinician in "Excel power switchgear" and I am
earning Rs.3.2 lakhs per annum. I Thank NSIC for conducting
good training program.
I N. Gayathri did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from from
08.01.2018 to 17.02.2018. This training was very useful for me.
Now I am working as an executive in "Skoruz" and I am earning
Rs.3.0 lakhs per annum. I Thank NSIC for giving me this
opportunity.
I V.Muthukumar did ”Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017 to
31.10.2017. This training was very useful for me. Now I am
running business called "VK Enterprises" and I am earning
Rs.1.80 lakhs per annum. I Thank NSIC for conducting good
training program.
I G.Divakar did ”Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 20.09.2017 to
31.10.2017. This training was very useful for me. Now I am
running business called "D shades" and I am earning Rs.2.8 lakhs
per annum. I Thank NSIC for conducting good training program.
I S.Vinoth kumar did ”Advanced
Development Program” ” at NSIC for a period from
31.10.2017. This training
running business called "Hanika Trading Advance System
am earning Rs.5 lakhs per annum
good training program.
I Reka Mukund did ”Advanced
Development Program” ” at NSIC for a period from
31.10.2017. This training
running business called "Cupa Cake" and
per annum. I Thank NSIC for conducting good training program.
I K.Therasal did ”Advanced
Development Program” ” at NSIC for a period from
31.10.2017. This training
running business called "Vasanth maharangan Siddha Hospital"
and I am earning Rs.5
conducting good training program.
I M.Karpagavalli did ”Advanced
Development Program” ” at NSIC for a period from
31.10.2017. This training
running business called "GV Gem & Jewel Hub" and
Rs.3.5 lakhs per annum. I Thank NSIC
training program.
I S.Rajeshwari did ”Advanced
Development Program” ” at NSIC for a period from
31.10.2017. This training
running business called "Krithick Leathers" and
Rs.4.8 lakhs per annum. I Thank NSIC
training program.
Advanced Integrated Entrepreneurship
” at NSIC for a period from 20.09.2017 to
training was very useful for me. Now I am
Hanika Trading Advance System" and I
Rs.5 lakhs per annum. I Thank NSIC for conducting
Advanced Integrated Entrepreneurship
” at NSIC for a period from 20.09.2017 to
training was very useful for me. Now I am
running business called "Cupa Cake" and I am earning Rs.5 lakhs
for conducting good training program.
Advanced Integrated Entrepreneurship
” at NSIC for a period from 20.09.2017 to
training was very useful for me. Now I am
running business called "Vasanth maharangan Siddha Hospital"
Rs.5 lakhs per annum. I Thank NSIC for
conducting good training program.
Advanced Integrated Entrepreneurship
” at NSIC for a period from 20.09.2017 to
training was very useful for me. Now I am
running business called "GV Gem & Jewel Hub" and I am earning
. I Thank NSIC for conducting good
Advanced Integrated Entrepreneurship
” at NSIC for a period from 20.09.2017 to
training was very useful for me. Now I am
running business called "Krithick Leathers" and I am earning
. I Thank NSIC for conducting good
I R. Manigandan did ”UPS, lnverter Basic electronics” at NSIC
for a period from 05.09.2017 to 05.11.2017. This training was
very useful for me. Now I am working as Sales Promoter in
“Samsung India" and I am earning Rs.3.2 lakhs per annum. I
Thank NSIC for conducting good training program.
I K.Venkatesan did ”Advanced Integrated Entrepreneurship
Development Program” ” at NSIC for a period from 22.09.2017 to
31.10.2017. This training was very useful for me. Now I am
working as PD Executive in “Rajalakshmi Automobile" and I am
earning Rs.2.2 lakhs per annum. I Thank NSIC for conducting
good training program.
I M. Mohana Sundaram did ”E-CAD ” at NSIC for a period from
11.09.2017 to 23.10.2017. This training was very useful for me.
Now I am working as Technical Engineer in “Plant control and
automation Technologies" and I am earning Rs.3.2 lakhs per
annum. I Thank NSIC for conducting good training program.
I Sai Hari Krishna did ”Certified PLC Programmer” ” at NSIC for a
period from 05.07.2017 to 05.08.2017. This training was very
useful for me. Now I am working as Technical Engineer in
“Nilpeter India Pvt LTD" and I am earning Rs.3.2 lakhs per
annum. I Thank NSIC for conducting good training program.
I M.Madhubalan did ”Certified PLC Programmer” ” at NSIC for a
period from 05.11.2016 to 05.01.2017. This training was very
useful for me. Now I am working as Technical Engineer in “POSH
Automats" and I am earning Rs.2.2 lakhs per annum. I Thank
NSIC for conducting good training program.
I P.Arun did ”Certified Automation Engineer” ” at NSIC for a
period from 18.01.2018 to 17.02.2018. This training was very
useful for me. Now I am working as Maintainence Engineer in
“Savola foods Arabia" and I am earning Rs.5 lakhs per annum. I
Thank NSIC for conducting good training program.
.
I A.Parthiban did ”Solar PV System and Technology ” ” at NSIC
for a period from 13.09.2017 to 27.09.2017. This training was
very useful for me. Now I am running business called "Cathers"
and I am earning Rs.3 lakhs per annum. I Thank NSIC for
conducting good training program.
I Dr.J.Ramya did ”Raspberry PI Python” ” at NSIC for a period
from 02.05.2018 to 04.05.2018. This training was very useful for
me. Now I am working as Associate Professor in “St.Joseph
Engineering College" and I am earning Rs.5 lakhs per annum. I
Thank NSIC for conducting good training program.
.
I Dr.P.Tamilselvi did ”Raspberry PI Python” ” at NSIC for a
period from 02.05.2018 to 04.05.2018. This training was very
useful for me. Now I am working as Associate Professor in
“Jeppiaar Engineering College" and I am earning Rs.5 lakhs per
annum. I Thank NSIC for conducting good training program.
.
I E.Fenil did ”Raspberry PI Python” ” at NSIC for a period from
02.05.2018 to 04.05.2018. This training was very useful for me.
Now I am working as Assistant Professor in “Jeppiaar
Engineering College" and I am earning Rs.5 lakhs per annum. I
Thank NSIC for conducting good training program.
.
I A.Godwin did ”Raspberry PI Python” ” at NSIC for a period
from 02.05.2018 to 04.05.2018. This training was very useful for
me. Now I am working as Assistant Professor in “Jeppiaar
Engineering College" and I am earning Rs.5 lakhs per annum. I
Thank NSIC for conducting good training program..
I S.Pandiyan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technical Assistant in
“Rajalakshmi Electricals" and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program.
I S.Prasanthi did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technical Assistant in
“SPM Electronics" and I am earning Rs.80 thousand per annum. I
Thank NSIC for conducting good training program
I G.Vishnu did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Assistant in “Rasi
Electricals" and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program
I P.Venkatesan did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Assistant in
“Wheels India Pvt Ltd" and I am earning Rs.1.08 lakh per annum.
I Thank NSIC for conducting good training program
I S.Jayaseelan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technician in “Honest
traders" and I am earning Rs.1.2 lakhs per annum. I Thank NSIC
for conducting good training program
I V.Vignesh did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Operator in “S.P.M.
Electronics" and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program
I R.Movin did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technical Assistant in
“Senthil Electrical Works" and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program
I T.Revathi did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technical Assistant in
“Raj Electricals" and I am earning Rs.72 thousand per annum. I
Thank NSIC for conducting good training program
I S.Saraswathi did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technician in “Arun
Electricals" and I am earning Rs.72 thousand per annum. I Thank
NSIC for conducting good training program
I M.Saravanan did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technical operator
in “Karuna Electricals" and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program
I K.Muniyappan did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technical Assistant
in “Senthil Electrical Works" and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program
I V.Sandhiya did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Trainee in “Malar
Electricals" and I am earning Rs.72 thousand per annum. I Thank
NSIC for conducting good training program.
I M.Pathma did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Trainee in “Malar
Electricals" and I am earning Rs.72 thousand per annum. I Thank
NSIC for conducting good training program
I S.Rajesh did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Job Work in “Venkatesan
Contractor" and I am earning Rs.72 thousand per annum. I Thank
NSIC for conducting good training program
I R.Saravanan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technical Assistant in
“Ganesh Electricals" and I am earning Rs.84 thousand per annum.
I Thank NSIC for conducting good training program
I K.Arunachalam did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technical Assistant
in “Rasi Electricals" and I am earning Rs.96 thousand per annum.
I Thank NSIC for conducting good training program
I R.Karuna did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technician in “Rasi
Electricals" and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program
I M.Prabhakaran did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technician in
“Rajalakshmi Electricals" and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program
I N.Nadeem did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Assistant in “Sri Ganesh
Electricals & Rewinding Works" and I am earning Rs.90 thousand
per annum. I Thank NSIC for conducting good training program
I S.Balamurugan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technicial Assistant in
“Arun Electricals" and I am earning Rs.72 thousand per annum. I
Thank NSIC for conducting good training program
I R.Jaiganesh did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technician in “Pallavan
Rewinding " and I am earning Rs.96 thousand per annum. I
Thank NSIC for conducting good training program
I S.Manikandan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Assistant in “Dhansekar
Electricals & Plumbing works" and I am earning Rs.96 thousand
per annum. I Thank NSIC for conducting good training program
I K.Vallarasu did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technical Assistant in “Jayam
Electricals" and I am earning Rs.72 thousand per annum. I Thank
NSIC for conducting good training program
I B.Arul did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technician in “Sri Ganesh
Electricals & Rewinding Works " and I am earning Rs.96
thousand per annum. I Thank NSIC for conducting good training
I M.Vijaya raghavan did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Tools operator in
“National Electricals & tools" and I am earning Rs.72 thousand
per annum. I Thank NSIC for conducting good training program
I R.Manikandan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technician in “Govind
Electricals" and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program.
I J.Janaki did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Trainee in “Saraswathy
enterprise Schooling" and I am earning Rs.70 thousand per
annum. I Thank NSIC for conducting good training program.
I K.Sathya did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technician in “Sri Kumaran
Traders" and I am earning Rs.70 thousand per annum. I Thank
NSIC for conducting good training program.
I A.Munavar khan did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Assistant in “RVS
Electricals Works" and I am earning Rs.72 thousand per annum. I
Thank NSIC for conducting good training program
I E.Mahalakshmi did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Trainee in “Raj
Electricals" and I am earning Rs.70 thousand per annum. I Thank
NSIC for conducting good training program
I A.Poovarasan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technician in “Ranga
Electricals" and I am earning Rs.72 thousand per annum. I Thank
NSIC for conducting good training program
I M.Pandiyan did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as worker in “Texmo Industries"
and I am earning Rs.96 thousand per annum. I Thank NSIC for
conducting good training program
I M.Chinnarasu did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Assistant in “Madhan
Electricals" and I am earning Rs.72 thousand per annum. I Thank
NSIC for conducting good training program
I M.Yuvaraj did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technical Assistant in
“Karthik Rewinding Works" and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program
I D.Kavimaran did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technicial assistant in
“Senthil Electrical works " and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program
I E.Chitra did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Trainee in “KBS Mobiles &
services" and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program
I M.Vithya did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Trainee in “Arun Electricals"
and I am earning Rs.96 thousand per annum. I Thank NSIC for
conducting good training program
I D.Gnanaprakash did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technician in
“Ranga Electricals" and I am earning Rs.96 thousand per annum. I
Thank NSIC for conducting good training program
I A.Vignesh did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Trainee in “Ganesh
Electricals" and I am earning Rs.92 thousand per annum. I Thank
NSIC for conducting good training program
I R.Vignesh did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technician in “Ranga
Electricals" and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program
I S.Vinitha did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Trainee in “Ranga
Electricals" and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program
I V.Mani did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technician in “SPM
Electronics and I am earning Rs.96 thousand per annum. I Thank
NSIC for conducting good training program
I R.Saravanan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as labour in “S.M.Ishmail
wiring contractor " and I am earning Rs.84 thousand per annum.
I Thank NSIC for conducting good training program
I C.Sarath kumar did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Assistant in “Sri
Lakshmi rewinding works " and I am earning Rs.90 thousand per
annum. I Thank NSIC for conducting good training program
I S.Durai murugan did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technician in “KBS
Mobiles sales and servies" and I am earning Rs.96 thousand per
annum. I Thank NSIC for conducting good training program
I S.Vigneshwaran did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technician in
“Arun Electricals" and I am earning Rs.90 thousand per annum. I
Thank NSIC for conducting good training program.
I E.Sathish did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Trainee in ” Raj Electricals"
and I am earning Rs.96 thousand per annum. I Thank NSIC for
conducting good training program
I T.Raheev Gandhi did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technical assistant
in “RVS Electricals" and I am earning Rs.86 thousand per annum.
I Thank NSIC for conducting good training program
I S.Ranjith kumar did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Trainee in
“S.M.Ishmail wiring contractor " and I am earning Rs.96 thousand
per annum. I Thank NSIC for conducting good training program
I P.Vijaya athikrishna did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as operator in
“Bismilla refrigeration sales and service" and I am earning Rs.84
thousand per annum. I Thank NSIC for conducting good training
program
I K.Kaviarasan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technial operarator in
“Ganesh Electricals" and I am earning Rs.84 thousand per
annum. I Thank NSIC for conducting good training program
I R.Siva murugan did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technician in
“Texmo industries " and I am earning Rs.90 thousand per annum.
I Thank NSIC for conducting good training program
I M.Kodiarasan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technician in “RVS
Electrical WORKS " and I am earning Rs.96 thousand per annum.
I Thank NSIC for conducting good training program
I P.Ragul did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as operator in “Karthik
rewinding works " and I am earning Rs.96 thousand per annum. I
Thank NSIC for conducting good training program
I P.Manikandan did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Trainee in “Govind
Electricals" and I am earning Rs.84 thousand per annum. I Thank
NSIC for conducting good training program
I M.Ramya did ”Refrigeration and Air Conditioning” at NSIC for a
period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Trainee in “Arun Electricals"
and I am earning Rs.96 thousand per annum. I Thank NSIC for
conducting good training program
I G.Vasantharaj did ”Refrigeration and Air Conditioning” at NSIC
for a period from 12.02.2018 to 23.03.2018. This training was
very useful for me. Now I am working as Technical assistant in
“Rajan Electricals" and I am earning Rs.96 thousand per annum.
I Thank NSIC for conducting good training program
I A.V.R. Praveen did ”E-CAD” at NSIC for a period from
11.09.2018 to 23.10.2018. This training was very useful for
me. Now I am working as Technician in "Plant control and
Automation Technologies" and I am earning Rs.1.2 Lakhs per
annum. I Thank NSIC for conducting good training program
I Habeeb AC Faheem.R did ”E-CAD” at NSIC for a period from
20.02.2018 to 20.03.2018. This training was very useful for
me. Now I am working as Assistant Engineer in “Krishna
Energy private Ltd." and I am earning Rs.2.2 Lakhs per annum.
I Thank NSIC for conducting good training program
I P.Chudarmuthu did ”PLC and SCADA” at NSIC for a period
from 12.02.2017 to 23.03.2017. This training was very useful
for me. Now I am working as Technical assistant in “Siri
Power System" and I am earning Rs.1.8 Lakhs per annum. I
Thank NSIC for conducting good training program
I N.Prithvirajan did ”UPS and Inverter” at NSIC for a period
from 12.1.2018 to 23.02.2018. This training was very useful
for me. Now I am working as Technical assistant in “Origin
ITFS" and I am earning Rs.1.2 Lakhs per annum. I Thank
NSIC for conducting good training program
I Ramki did ” UPS and Inverter” at NSIC for a period from
12.1.2018 to 23.02.2018. This training was very useful for me.
Now I am working as Technical assistant in “K & N electro
techtronix" and I am earning Rs.1.8 Lakhs per annum. I Thank
NSIC for conducting good training program
I E.Meganathan did ” PLC ” at NSIC for a period from
12.1.2017 to 23.02.2017. This training was very useful for me.
Now I am working as Technical assistant in “SNJ distilling
Private Limited" and I am earning Rs 2.5 Lakhs per annum. I
Thank NSIC for conducting good training program
I M.Jawahar did ” PLC ” at NSIC for a period from 12.11.2017
to 23.01.2018. This training was very useful for me. Now I am
working as Technical assistant in “Kerthi Electronics" and I
am earning Rs 1.2 Lakhs per annum. I Thank NSIC for
conducting good training program
I Thiripura Sundari did ” PLC & Scada” at NSIC for a period
from 12.11.2017 to 23.01.2018. This training was very useful
for me. Now I am working as Assistant in "Muthu Financial
Corporation" and I am earning Rs 1.2 Lakhs per annum. I
Thank NSIC for conducting good training program
I Arun did ” PLC & E-CAD ” at NSIC for a period from 06.01.18
to 7.02.18. This training was very useful for me. Now I am
working as Technical assistant in “savola foods Arabia" and I
am earning Rs 2.2 Lakhs per annum. I Thank NSIC for
conducting good training program
I Sarath Kumar did ” PLC ” at NSIC for a period from
06.02.2017 to 31.03.2017. This training was very useful for
me. Now I am working as Technical assistant in “RARA
groups" and I am earning Rs 1.2 Lakhs per annum. I Thank
NSIC for conducting good training program
I Jayanthi did ” PLC & Scada ” at NSIC for a period from
12.11.2017 to 23.01.2018. This training was very useful for
me. Now I am working as Technical assistant in “Shankaran
A.S. Academy" and I am earning Rs 1.2 Lakhs per annum. I
Thank NSIC for conducting good training program
I Parthiban did ” Field Technicia ” at NSIC for a period from
06.02.2017 to 24.03.2017. This training was very useful for
me. Now I am working as Relationship Officer in “Axis Bank"
and I am earning Rs 2.2 Lakhs per annum. I Thank NSIC for
conducting good training program
I Shyam Sundar did ” E-CAD ” at NSIC for a period from
09.01.2017 to 24.02.2017 This training was very useful for
me. Now I am working as Assistant Manager in “UDS private
Limited" and I am earning Rs 6.5 Lakhs per annum. I Thank
NSIC for conducting good training program
I Guru Sankar did ” E-CAD ” at NSIC for a period from
11.06.2018 to 10.07.2018 This training was very useful for
me. Now I am working as Electrical Enginnering “Casagrand
Property care" and I am earning Rs .2.2 Lakhs per annum. I
Thank NSIC for conducting good training program
I Saravanan did ” Android ” at NSIC for a period from
06.06.2018 to 24.07.2018. This training was very useful for
me. Now I am working as Contractor in “Business" and I am
earning Rs 1.25 Lakhs per annum. I Thank NSIC for
conducting good training program
I Mukesh kumar did ” E-CAD ” at NSIC for a period from
03.05.2018 to 06.06.2018 This training was very useful for
me. Now I am working as HVAC technician in " Chennai
Airport" and I am earning Rs 1.9 Lakhs per annum. I Thank
NSIC for conducting good training program
I Mohamed Marwan did ” PLC ” at NSIC for a period from
09.01.2017 to 24.03.2017 This training was very useful for
me. Now I am working as technician in “NAFFCO" and I am
earning Rs1.8 Lakhs per annum. I Thank NSIC for conducting
good training program
I Prema V. did course in Engineering project ” at NSIC for a
period from 8.1.2017 to 21.2.2017. This course was very useful
for me. Now I am working in M/s. Infosys Mysore , as Engineer
and getting a pay of Rs.15000/-p.m. I Thank NSIC for giving
me this opportunity.
I Tharani. V did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from 1/12/2017 to
11/01/2018. This training was very useful for me. Now I am
working as an executive in "Somersit" and I am earning Rs.3.5
lakhs per annum. I Thank NSIC for giving me this opportunity.
I M.Purusothaman did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as Technician in
“Malar Electricals" and I am earning Rs.96 thousand per annum.
I Thank NSIC for conducting good training program
I P.Ponmalar did ”Refrigeration and Air Conditioning” at NSIC for
a period from 12.02.2018 to 23.03.2018. This training was very
useful for me. Now I am working as Technician in “ Krishna
Electricals" and I am earning Rs.84 thousand per annum. I Thank
NSIC for conducting good training program
I K.Sujith Kumar did ”Refrigeration and Air Conditioning” at
NSIC for a period from 12.02.2018 to 23.03.2018. This training
was very useful for me. Now I am working as assistant in “Sri
kumaran traders " and I am earning Rs.86 thousand per annum. I
Thank NSIC for conducting good training program
I David Isaac did ” Advanced Integrated Entrepreneurship
Development Program” at NSIC for a period from 1/12/2017 to
11/01/2018. This training was very useful for me. Now I am
working as HOD in "SRM university" and I am earning Rs.7.7
lakhs per annum. I Thank NSIC for giving me this opportunity.
--------------------------------------------------------------------------------------------------------------------
I A.Raja did course in” Solar” at NSIC for a period from
9.4.2018 to 20.4.2018. This course was very useful for me. Now
I am working in M/s. Accenture as Desktop support engineer
and getting a pay of Rs.15000/-p.m. I Thank NSIC for giving
me this opportunity.
I Sai Hari Krishan did course in”PLC” at NSIC for a period from
5.7.2017 to 5.8.2017. This course was very useful for me. Now I
am working in M/s. Nilpitl India Pvt Ltd as Engineer and
getting a pay of Rs.15000/-p.m. I Thank NSIC for giving me
this opportunity.