nRF8001 application block diagram nRF8001 Bluetooth low ... · the application and profile nRF8001...

2
KEY FEATURES Bluetooth Specification v4.0 compliant single mode low energy solution • Complete PHY, Link Controller and Host subsystem • Profiles and example applications provided in µBlue SDK • Cost and power optimized for slave operation • Simple SPI based Application Controller Interface (ACI) • Full Link Controller and Host security • 1.9 to 3.6V operation • Linear voltage regulator • Step-down DC/DC voltage regulator providing up to 20% peak current reduction • Sub 14mA peak current with linear voltage regulator • Supports sub 10µA average current operation • 16MHz crystal oscillators • Supports low cost external 16MHz crystals • Ultra low power 32kHz crystal and RC oscillators • Support operation without external 32kHz crystal • Battery voltage monitor • Temperature sensor • RoHS compliant 5x5mm 32-pin QFN package APPLICATIONS • Sports and fitness sensors • Healthcare and medical sensors • Continua™ Version Two certified products • Remote controls • Watches • Mobile phone peripherals • Automation sensors • Proximity tags Complete Bluetooth low energy solution The nRF8001 connectivity-on-chip solution The nRF8001 is the first member of Nordic Semiconductor`s µBlue family of Bluetooth low energy solutions. It is designed to be used in conjunc- tion with an external microcontroller running the application. The nRF8001 integrates a complete PHY, Link Controller and Host single mode Bluetooth low energy subsystem and features a simple SPI based interface to the application microcontroller. Qualified profiles, APIs and example application are provided as part of the µBlue SDK which is easily portable to a range of different application microcontrollers. This system segmentation allows the nRF8001 to be used with the best-fit microcontroller for a specific applica- tion as well as ease integration and end product qualification as application and protocol stack does not share the same microcontroller. nRF8001 application block diagram Optimized single mode slave solution Bluetooth low energy features The nRF8001 is a cost and power optimized solution for single mode slave applications such as sports, healthcare and automation sensors, watches, remote controls, proximity tags and mobile phone peripherals. The on-chip protocol stack provides a full slave role support, encryption, client and server protocols, just works security, all mandatory client and server profile features as well as direct test mode for PHY qualification. nRF8001 protocol stack Designed for coin cell battery operation Sub 14mA peak, micro ampere range average currents The nRF8001 has been designed from scratch to meet the stringent peak current requirements of standard coin cell batteries like CR2032 where total peak current is advised to be below 20mA at any time. Using the on-chip linear regulator the nRF8001 has a peak current below 14mA, thus provid- ing a valuable headroom for the application microcontroller. Depending on the application and profile nRF8001 can support average currents below 10µA, enabling years of battery lifetime on standard coin cell batteries. Disclaimer: This product brief contains an overview of the silicon feature set and operating parameters and should not be considered as the final specification. For current and complete product specifications, please refer to the product specification, available from Nordic Semiconductor. Specifications are subject to change without notice. Trademarks are property of their respective owners. Reference Design RF Silicon Development Tools Software nRF8001 Single mode Bluetooth low energy slave connectivity-on-chip solution PRODUCT BRIEF nRF8001 Product Brief revision 1.0

Transcript of nRF8001 application block diagram nRF8001 Bluetooth low ... · the application and profile nRF8001...

Page 1: nRF8001 application block diagram nRF8001 Bluetooth low ... · the application and profile nRF8001 can support average currents below 10 µ A, enabling years of battery lifetime on

KEY FEATURES

•Bluetooth Specificationv4.0compliantsinglemodelowenergysolution

• CompletePHY,LinkControllerandHostsubsystem

• ProfilesandexampleapplicationsprovidedinµBlueSDK

• Costandpoweroptimizedforslaveoperation

• SimpleSPIbasedApplicationControllerInterface(ACI)

• FullLinkControllerandHostsecurity

• 1.9to3.6Voperation

• Linearvoltageregulator

• Step-downDC/DCvoltageregulatorprovidingupto

20%peakcurrentreduction

• Sub14mApeakcurrentwithlinearvoltageregulator

• Supportssub10µAaveragecurrentoperation

• 16MHzcrystaloscillators

• Supportslowcostexternal16MHzcrystals

• Ultralowpower32kHzcrystalandRCoscillators

• Supportoperationwithoutexternal32kHzcrystal

• Batteryvoltagemonitor

• Temperaturesensor

• RoHScompliant5x5mm32-pinQFNpackage

APPLICATIONS

• Sportsandfitnesssensors

• Healthcareandmedicalsensors

• Continua™VersionTwocertifiedproducts

• Remotecontrols

•Watches

•Mobilephoneperipherals

• Automationsensors

• Proximitytags

Complete Bluetooth low energy solutionThe nRF8001 connectivity-on-chip solution

ThenRF8001isthefirstmemberofNordicSemiconductor`sµBluefamily

ofBluetooth lowenergysolutions.Itisdesignedtobeusedinconjunc-

tionwithanexternalmicrocontrollerrunningtheapplication.ThenRF8001

integratesacompletePHY,LinkControllerandHostsinglemodeBluetooth

lowenergysubsystemandfeaturesasimpleSPIbasedinterfacetothe

applicationmicrocontroller.Qualifiedprofiles,APIsandexampleapplication

areprovidedaspartoftheµBlueSDKwhichiseasilyportabletoarangeof

differentapplicationmicrocontrollers.Thissystemsegmentationallowsthe

nRF8001tobeusedwiththebest-fitmicrocontrollerforaspecificapplica-

tionaswellaseaseintegrationandendproductqualificationasapplication

andprotocolstackdoesnotsharethesamemicrocontroller.

nRF8001 application block diagram

Optimized single mode slave solutionBluetooth low energy features

ThenRF8001isacostandpoweroptimizedsolutionforsinglemodeslave

applicationssuchassports,healthcareandautomationsensors,watches,

remotecontrols,proximitytagsandmobilephoneperipherals.Theon-chip

protocolstackprovidesafullslaverolesupport,encryption,clientand

serverprotocols,justworkssecurity,allmandatoryclientandserverprofile

featuresaswellasdirecttestmodeforPHYqualification.

nRF8001 protocol stack

Designed for coin cell battery operationSub 14mA peak, micro ampere range average currents

ThenRF8001hasbeendesignedfromscratchtomeetthestringentpeak

currentrequirementsofstandardcoincellbatterieslikeCR2032wheretotal

peakcurrentisadvisedtobebelow20mAatanytime.Usingtheon-chip

linearregulatorthenRF8001hasapeakcurrentbelow14mA,thusprovid-

ingavaluableheadroomfortheapplicationmicrocontroller.Dependingon

theapplicationandprofilenRF8001cansupportaveragecurrentsbelow

10µA,enablingyearsofbatterylifetimeonstandardcoincellbatteries.

Disclaimer:Thisproductbriefcontainsanoverviewofthesiliconfeaturesetandoperatingparametersandshouldnotbeconsideredasthefinalspecification.Forcurrentandcompleteproductspecifications,pleaserefertotheproductspecification,availablefromNordicSemiconductor.Specificationsaresubjecttochangewithoutnotice.Trademarksarepropertyoftheirrespectiveowners.

Reference DesignRF Silicon Development ToolsSoftware

nRF8001Single mode Bluetooth low energy

slave connectivity-on-chip solution

PRODUCT BRIEF

nRF8001ProductBriefrevision1.0

Page 2: nRF8001 application block diagram nRF8001 Bluetooth low ... · the application and profile nRF8001 can support average currents below 10 µ A, enabling years of battery lifetime on

PR

OD

UC

T B

RIE

F nR

F800

1

SAN JOSE - USA

TRONDHEIM - NORWAY

OSLO - NORWAY

HONG KONG - CHINA

SEOUL - KOREA

TOKYO - JAPAN

Trondheim, Norway

Telephone: +47 72 89 89 00

www.nordicsemi.com

Worldwide office locationsHeadquarter

On-chip peripherals±250 ppm 32kHz RC oscillator

The32kHzRCoscillatorenablesthenRF8001tobeusedinapplication

withoutanexternal32kHzcrystalsavingbothcostandboardspace.

Ultra low power 32kHz crystal oscillator

Forconnectionorientedmodeswithlongconnectionintervalstheultra

lowpower32kHzcrystaloscillatorswithanexternalhighprecisioncrystal

providesthelowestpowersolution.

Step down DC/DC converter

ThestepdownDC/DCconverterisspecificallydesignedtoreducepeak

currentwhenoperatingfrom3Vnominalcoincellbatteries.Whenusedit

providesupto20%lowerpeakcurrentscomparedtousingthelinearvolt-

ageregulatorat3Vinput.

Battery monitor

Thebatterymonitorisusinganon-chipADCtomeasurethesupplyvoltage

andisaccessibleovertheACI.

Temperature sensor

Thetemperaturesensorprovides10-bittemperaturereadingtroughtheACI

witharangefrom-40to+80ºC.

µBlue Software Development Kit (SDK)Bluethooth low energy profiles

TheµBlueSDKincludesqualifiedBluetoothlowenergyprofiles,ACI

transportlayersandexampleapplications.Itisprovidedinc-sourcecode

andiseasilyportabletoarangeoffdifferent.TheprofilesintheµBlueSDK

complementstheonchipprotocolstackinthenRF8001toprovideaeasy

tousecompletequalifiedBluetoothlowenergysolution.

For more informationPleasevisitwww.nordicsemi.comforthecompleteproductspecification

andmoreinformationaboutthisoranyotherULPwirelessproducts.

About Nordic Semiconductor ASAUltra low power RF silicon solutions

NordicSemiconductorisfablesssemiconductorcompanyspecializing

inULPshort-rangewirelesscommunication.Nordicisapubliccompany

listedontheNorwegianstockexchange.

NordicprovidesRFSiliconSolutionsforultralowpowerwirelessconnec-

tivityincluding:

• Proprietary2.4GHzandSub1GHZISMbandsolutions

• SinglechipANT™solutions

• µBlueBluetoothlowenergysolutions

SpecificationsFrequencyband 2.4GHzISM(2.40200–2.4800GHz)

On-airdatarate 1Mbps

Modulation GFSK

RFchannelresolution 2MHz

RFchannels 40

Outputpower Programmable:0,-6,-12or-18dBm

RFStandard

compliance Bluetoothv4.0singlemodePHY

Externalcrystal(s) 16MHz±60ppm

32kHz±250ppmorbetter(optional)

Supportedprotocols Bluetooth lowenergy

-LinkController

-Host(L2CAP,SecurityManager,

AttributeProtocol,GenericAccessProfile,

GenericAttributeProfile)

Protocolfeatures Bluetoothlowenergy

-Linklayerslaverole

-Linklayerencryption

-AttributeProtocolclient

-AttributeProtocolserver

-GenericAttributeProfileclient

-GenericAttributeProfileserver

-DirectTestMode(DTM)

External SPIPhysicaltransport

Microcontroller µBlueACILogicaltransport

interface

Oscillators 16MHzcrystaloscillator

32kHzcrystaloscillator

32kHz±250ppmRCoscillator

DigitalI/O SPISlave

2-wireUART

Analogperipherals Temperaturesensor

Batterymonitor

Voltageregulator Linear(1.9to3.6Voperation)

StepdownDC/DC(2.1to3.6Voperation)

Packageoptions RoHScompliant32-pin5x5mmQFN

Visitwww.nordicsemi.com forNordicSemiconductorsalesofficesanddistributorsworldwide.

Disclaimer:Thisproductbriefcontainsanoverviewofthesiliconfeaturesetandoperatingparametersandshouldnotbeconsideredasthefinalspecification.Forcurrentandcompleteproductspecifications,pleaserefertotheproductspecification,availablefromNordicSemiconductor.Specificationsaresubjecttochangewithoutnotice.Trademarksarepropertyoftheirrespectiveowners.

nRF8001ProductBriefrevision1.0