Now Available from Hydrofarm - Planet Natural · PHE1THD Phantom 1000W, 120/240v Dimmable Digital...
Transcript of Now Available from Hydrofarm - Planet Natural · PHE1THD Phantom 1000W, 120/240v Dimmable Digital...
Phan
tom
Dig
ital B
alla
st
1000W 240v 12 lbs.
PHE1TH240
Hydrofarm’s Phantom Digital Ballast arrives on the market as the most rigorously tested ballast on the market. The Phantom features silent operation, lightweight design, multiple placement options and the maximum lumen output around. We listened to your needs and learned. Now you can reap the benefit with this durable, premium digital ballast.
ITEM CODE DESCRIPTION WT SRP
PHE1THD Phantom 1000W, 120/240v Dimmable Digital Ballast 13 lbs. $399.95
PHE1TH240 Phantom 1000W/240v Digital Ballast 12 lbs. 389.95
PHE600D Phantom 600W, 120/240v Dimmable Digital Ballast 11 lbs. 249.95
PHE400 Phantom 400W/120v/240v Digital Ballast COMING SOON! 9 lbs. 189.95
PHE250 Phantom 250W 120v/240v Digital Ballast COMING SOON! 8 lbs. 164.95
1000W 120/240v 13 lbs.
PHE1THD Dimmable
Built with the Best Components for Top Performance & Reliability!
Tri-mode dimmable micro- processor saves energy in 3 low light situations
Internal RF shielding
8 ft premium 15 amp IEC power cord Included — an industry exculsive
Tri-mode dimming feature available
Adjustable handle
Resettable breakers
* 3 year full warranty, 2 year prorated
• Dual resettable breakers – protects lamp and household circuits• Only ballast on the market designed for vertical operation for coolest
running and optimum grow space• Drives the highest light output for maximum plant growth• Universal reflector adaptor and 8 ft heavy duty cord included• Unlike magnetic ballast, Phantom runs completely silent• Patented lock & seal BAREF lamp cord installed• Internal RF protection• Triple surface aluminum fins – most efficient cooling in its class• Internal Resin coating protects components for long life
WESTSan Francisco
800.634.9990
CENTRALDallas
800.634.9999
EASTPhiladelphia
888.780.4567
SOUTHEASTMiami
877.780.4567www.hydrofarm.com
Now Available from Hydrofarm
Performance
Phantom Phacts
Reset Buttons:The reset buttons work based on input power. For 120v only one input will trip, for 240v both may trip. The resets also act as thermal cutoffs, and may trip in the case of an overheating situation.
Hot Re-strike ProgrammingThe Phantom line of ballasts has built in hot re-strike programming to protect the lamp and ballast in the event of the ballast turning off unexpectedly. Hydrofarm’s proprietary Hot Re-strike programming delays the lamp restart sequence to prevent damage to the lamp or ballast.If your lamp fails to start immediately, DO NOT cycle the power on and off. This can damage the lamp and ballast. If after 1/2 hour your lamp is still not lit, shut off power to the ballast, and reconnect. This will begin the startup sequence again.
DIMMABLE - DUAL VOLTAGE PHE1THD & PHE600D
LED status panel
Reset Buttons
Input Receptacle: 120/240v
Dimming switch
Output Output
Input Receptacle: 120/240v
Reset Buttons
DUAL VOLTAGEPHE400 & PHE250
Reset Buttons
Input Cord: 240v Output
NON DIMMABLE - 240VPHE1TH240
Dimming switch alternates ballast
output
LEDs indicate operation status and power level setting
DIMMING PANELPHE1THD/PHE600D
MODEL Main Voltage
Watts Amps(Imax)
Amps 100% Power
Amps 75% Power
Amps 60% Power
Power Factor
Working Voltage
Ignitor Voltage
THD CF ta tc
PHE1THD 120/240 1060 9.2/4.6 8.8 - 120v4.4 - 240v
6.9 - 120v3.4 - 240v
5.3 - 120v2.7 - 240v
> 0.98 100-275 4.0 kV < 8% 1.414-1.6
40℃/104℉
70℃/158℉
PHE1TH240 240 1060 4.6 N/A N/A N/A > 0.98 190-275 4.0 kV < 8% 1.414-1.6
40℃/104℉
70℃/158℉
PHE600D 120/240 636 5.5 5.3 - 120v2.7 - 240v
4.2 - 120v2.1 - 240v
3.2 - 120v1.6 - 240v
> 0.98 100-275 4.0 kV < 8% 1.414-1.6
40℃/104℉
70℃/158℉
PHE400 120/240 424 3.7 N/A N/A N/A > 0.98 100-275 4.0 kV < 8% 1.414-1.6
40℃/104℉
70℃/158℉
PHE250 120/240 265 2.3 N/A N/A N/A > 0.98 100-275 4.0 kV < 8% 1.414-1.6
40℃/104℉
70℃/158℉