ExxonMobil™ ICP polypropylene

Productivity and performance improvements for appliance applications

Key advantages

• Comprehensive product portfolio for various appliance applications

• Productivity improvement opportunities for cost reduction

• Improved finished product performance and appearance

ExxonMobil™ impact copolymer (ICP) polypropylene (PP) resins provide solutions to meet the increasing performance needs of various appliance applications.

Comprehensive product portfolioAvailable in a broad range of melt flow rates (MFR), ExxonMobil ICP PP resins offer an excellent balance of stiffness and impact strength for outstanding processability, good finished product appearance and durability.

ExxonMobil ICP PP resins are suitable for both large and small appliances. Typical applications include:• washing machines and dryers• refrigerators and freezers• dishwashers• vacuum cleaners• fans• de-humidifiers and air purifiers

ExxonMobil ICP PP resins are also suitable for compounding in other small appliances enabling higher stiffness and heat resistance. Typical applications include:• electric kettles• microwave ovens• slow cookers

The portfolio of ExxonMobil ICP PP resins provides customers with the reliability and high-quality consistency needed for businesses to succeed.

North America portfolio

P1215-042E49

Contact us for more information:exxonmobilchemical.com/pp

Improved finished product performance• Good flow of ExxonMobil PP7505KNE3 and

AXO3BE3 ICP PP resins helps longer flow distance at reduced pressure.

• The antistatic properties of ExxonMobil PP7505KNE3 and PP7032KN ICP PP resins help to improve mold release and reduce dust build-up during storage.

• High-impact strength ExxonMobil PP7032KN and PP7033N ICP PP resins are suitable for parts requiring excellent toughness.

• Designed to meet high temperature, detergent and bleach exposure of durable appliance

applications, ExxonMobil PP7694E2 offers long-term protection against polymer degradation.

Productivity improvement opportunities forcost reduction• High melt flow rate (MFR) ExxonMobil PP7505KNE3

ICP PP resin is suitable for injection molding of large, thin-walled parts as well as parts with complex designs. It has the potential to provide a lower cycle time and processing temperature, which leads to productivity improvements and energy savings.

©2016 Exxon Mobil Corporation. To the extent the user is entitled to disclose and distribute this document, the user may forward, distribute, and/or photocopy this copyrighted document only if unaltered and complete, including all of its headers, footers, disclaimers, and other information. You may not copy this document to a Web site. ExxonMobil does not guarantee the typical (or other) values. Analysis may be performed on representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, suitability, accuracy, reliability, or completeness of this information or the products, materials, or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage, or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. There is no endorsement of any product or process, and we expressly disclaim any contrary implication. The terms, “we”, “our”, “ExxonMobil Chemical”, or “ExxonMobil” are used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliates they directly or indirectly steward. ExxonMobil, the ExxonMobil Logo, the Interlocking “X” Device, and all other product names used herein are trademarks of ExxonMobil unless indicated otherwise.Images are demonstrative of typical applications for ExxonMobil Chemical products and are taken from commercially available products.

ExxonMobil™ ICP PP resins provide solutions for appliance applications

Properties PP7032KN * PP7033N * PP7694E2 ** PP7414 PP7855E1 AXO3BE3 PP7505KNE3

Melt flow rate¹ (g/10 min)

4 8 19 20 30 35 50

Flexural modulus²Kpsi (MPa)

195 (1340) 197 (1360) 189 (1300) 150 (1030) 160 (1100) 196 (1350) 152 (1050)

Notched izod impact³ft-lb/in (J/m)

No Break 4.0 (210) 3.2 (170) 3.3 (180) 3.2 (170) 1.6 (85.0) 2.2 (120)

Heat deflection temp⁴F(°C)

207 (97.2) 212 (100) 212 (100) 185 (85.1) 202 (94.7) 227 (108) 205 (96.2)

Attributes: - High impact - High stiffness- Antistatic- Suitable for extrusion

and thermoforming

- High impact- High stiffness

- Good stiffness/ impact balance

- Long-term heat aging resistance

- General purpose grade

- Suitable for basestock compounding

- Good stiffness/ impact balance

- Fast cycle time

- High stiffness- Fast cycle time- Good appearance

- Excellent processability for large, thin-walled or complex design

- Fast cycle time- Color stability

Typical applications

Washing machines - Agitator- Balancer

- Agitator- Balancer

- Agitator- Outer body, balancer

- Agitator - Tubs, lids- Outer body

- Base, lids- Balancer, outer body

- Tubs, outer body, lids

Dishwashers - Tub, inner door liner- Utensil basket, vents- Rack wheels, dispensers- Balancer, connectors

- Basestock (compound)

Refrigerators - Base / kick plates- Toe grilles, caps

- Base / kick plates- Air ducts

- Door buckets / bins- Base / kick plates- Toe grilles, caps- Air ducts

- Base / kick plates- Toe grilles, caps

- Ice cube trays- Door buckets / bins- Base / kick plates

- Door buckets / bins- Base / kick plates- Air ducts

Small appliances - Base / frame / structure

- Base / frame / structure

- Motor housings - Covers, caps - Housing, panels, - Brackets, grilles- Covers, caps

- Housing, panels, - Brackets, grilles- Covers, caps

- Housing, panels- Brackets, grilles- Covers, caps

1) Melt Flow Rate, ASTM 1238, 230°C, 2.16kg (g/10min) 2) Flexural Modulus at 0.05 in/min, 1% secant (MPa) ASTM D790A3) Notched Izod Impact (J/m) ASTM D256A 4) Heat Deflection Temperature – at 66psi, unannealed (°C) ASTM D648

Notes : please refer to Prospector® for grades current UL status. UL and the UL logo are trademarks of UL LLC ©2015 All Rights Reserved.* grades also available in non-nucleated version** grade also available in non-heat aging version