©2010 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks ofITT Corporation. Specification and other data are based on information available at thetime of printing, and are subject to change without notice.www.ittcannon.com

Global Design & Manufacturing

Customer Support

North America Europe & Middle East Asia

MEXICO - Cannon, VEAMAv. Libre Comercio s/n-entre Calzada IndustrialNuevo Nogales y Calzada del Raquet Club,Parque Industrial Nuevo Nogalesphone: +52.631.3110050fax: +52.631.3110060

USA - Cannon666 East Dyer RoadSanta Ana, CA 92705toll free: 1.800.854.3028phone: +1.714.557.4700fax: +1.714.628.2142

USA - BIW Connector Systems500 Tesconi CircleSanta Rosa, CA 95401phone: +1.707.523.2300fax: +1.707.523.3567

USA - Universal Contact100 New Wood RoadWatertown, CT 06795phone: +1.860.274.9681fax: +1.860.274.4963

FRANCE - Cannon, VEAM15, Boulevard Robert ThiboustSerris, France 77700phone: +33.1.60.04.93.93fax: +33.1.60.04.93.90

GERMANY - Cannon, VEAMCannonstrasse 1Weinstadt, 71384phone: +49.7151.699.0fax: +49.7151.699.217

ITALY - VEAMCorso Europa 41/43Lainate (MI), Italy 20020phone: +39.02938721fax: +39.0293872300

LEBANON - BIW Connector SystemsP.O. Box 199JouniehLebanonphone: +961.9.911.560fax: +961.9.912.126

UK - Cannon, VEAMJays Close, Viables EstateBasingstoke, RG22 4BAphone: +44.1256.311200fax: +44.1256.323356

CHINA - Cannon, VEAMTuopandun Industrial Area, Jinda Cheng,Xiner Village, Shajing Town,Baoan District, Shenzhen City,Guangdong, China 518125phone: +86.755.2726.7238fax: +86.755.2726.7515

HONG KONG - Cannon, VEAMUnits 2405-6, 24/F, ING Tower308 Des Voeux RoadCentralHong Kongphone: +852.2732.2720fax: +852.2732.2919

INDIA - Cannon, VEAMITT Corporation India Pvt Ltd2nd Fl Prama House21 Cama Industrial EstateWalbhat Road, Goregaon (E),Mumbaiphone: +91 22 67843000fax: +91 22 26783033

JAPAN - Cannon, VEAM11-3, 5 Chome, Hibarigaoka, Zama-shiKanagawa, Japan 228-0003phone: +81.462.57.2010fax: +81.462.57.1680

SINGAPORE - Cannon, VEAM10 Jalan Kilang #06-01 Singapore159410phone: +65.62763693 ext 232fax: +65.62763685

Interconnect SolutionsCannon, VEAM,

BIW Connector Systems

Over four billion

in use without a

single failure

Universal Contacts

ENGINEERED FOR LIFE

www.ittcannon.com

High Hertz Forces – Preload – 1.3mm to 4.6mm Free Heights

The ITT Interconnect Solutions UniversalContact Series provides over 3,000 matingcycles and is packaged in 12mm wide tapeand reels to the EIA-481 standard. Wearresistance is subject to mating surface finish and plating type. With less than 20milli ohms of contact resistance, pure signalintegrity or grounding may be achieved.

When deflected, the Universal Contact pro-vides 0.7N of force with the associatedwipe at the specified working ranges ensur-ing the ultimate interconnect link. Specificmodels will function under a 40G loading.Over the last 5 years, the Universal Contactboasts the sustained achievement of over 6sigma PPM results.

The “side wings” protect the moving beam andprevent the beam from being over-stressed anddamaged

The pitch of the Universal Contacts range from1.25mm to 1.45mm depending on the free heightsize

The “solder well” prevents solder paste and fluxfrom wicking up the contact and changing theoperating forces

The “Domed” surface provides over 300k psialong with wipe in the mated condition achiev-ing a superior interconnect system

WHY INNOVATIVE CUSTOMERS CHOOSE ITT

• Provides overlapping free heights from 1.2 to 4.6mm, replacing traditional interconnect systems such as pogo pins or leaf spring contacts

• Incorporates a domed surface on the contact point beam, maintaining a high hertz stress contact and ensuring functionality during extreme conditions

• Creation of a protective “box” through the incorporation of unique side walls, preventing the beam from being over stressed and maintaining pre-load to the beam in the unmated condition

• Utilization of a defined solder-well, preventing soldier from wicking up the contact and causing variability in the contact forces

• Tight tolerancing on the X-Y-Z movement, allowing for robust connections between the contacts and component assemblies and ensuring outstanding performance during shock and vibration

Addressing stated commercial customerneeds for decreasing product variabilityacross distributed global manufacturingfootprints, ITT Interconnect Solutions pio-neered the innovative “Universal Contact.”Demonstrating a solid foundation in inter-connect science, ITT applied the provenconcept of high hertz stress preventingmost dry circuit contact failures.  Couplingthis technology with both wipe and base

material finish considerations, ITT commercial-ized the Universal Contact as an independentSMT contact providing electrical connectivitybetween two points. Ensuring specific customermaterial selection capabilities, this unique prod-uct is available in both Beryllium and TitaniumCopper alloys. With 0.1mm of movement, theUniversal Contact creates 0.3N of force and300k psi eliminating all issues surroundinglife cycle and vibration conditions.

100% Reliable Functionality for Critical Commercial Applications

The standard specifications are:

Base Material: BeCu or TiCu

Plating: Selective Gold over Nickel plate

Contact Resistance: < 20 milli ohms

Rating: 2.0 to 3.0 amps depending on the free height

Solder Systems: Infrared and Hot Air re-flow

Operating Temperature: -40C to +85C

Contact Forces: .3N to .9N

APPLICATIONS

• Smart Phone

• PDA

• Laptop and Computer

• Home Electronic Devices

• Vehicle Keyfob

• Medical Scanning Equipment

• Bar Code Scanners

• GPS Units

• Set Top Boxes

UNIVERSAL CONTACT USES...

www.ittcannon.com

4For more specifications please see: www.ittcannon.com/...

With the ITT Universal Contact series,Interconnect Solutions fields a unique, sin-gular contact design which exhibits over0.3N of force with only 0.1mm of deflection.Coupled with 300k PSI and defined wipingaction when deflected, the Universal Contactprovides the ultimate dry circuit pressurecontact for commercial and military applica-tions. Rounding out this offering is the capa-bility for nominal working heights ranging

VEAM, and BIW. Our Innovation Timelineuniquely defines a historical compendiumof interconnect leadership spanning over90 years and including many industry firsts;Audio Connectors, Aviation Circulars, D-Sub's, Micro's, fiber optic assemblies, ZeroInsertion Force Technologies, and otheradvanced applications of InterconnectScience. When collaborating with a tech-nology leader, choose a participant withdocumented trust, established through

T H I N KA B O U T I T T multi-industry achievements as substantiat-

ed through the participation on every freeworld space mission, the creation of thefirst Mil / Spec interconnects, participationon the first talking movie, 100% reliabilityfor over 45 years in Rail applications, andnumerous additional achievements in majorMilitary, Aerospace, Industrial, Medical, andPower markets. At ITT ICS, we truly are"Engineered for Life™." Think about ITT.

Reliability, Innovation, and EngineeredSolutions, these terms collectively describeITT Interconnect Solutions and define alegacy of Interconnect Science spanningnearly a century, reflecting billions of quali-ty products sold, and incorporating thethree industry leading brands of Cannon,

Innovative Functionality & Global Execution

Contact dimension

Dimensions (mm)AUC Series

1.30UC 1.3mm1.80UC 1.8mm

UC 1.8mm-SPLUC 2.5mmUC 3.5mmUC 3.5mm-SPLUC 4.0mmUC 4.6mm

B3.483.35

F0.400.40

G2.502.40

H2.052.35

C1.000.90

D0.771.00

E0.700.79

1.802.50

3.414.87

0.400.74

2.602.90

2.353.38

0.900.98

1.001.40

0.791.19

3.503.50

4.984.98

0.450.45

3.403.40

3.253.25

1.101.10

2.002.00

1.581.58

4.004.60

5.005.40

0.450.68

3.403.35

3.002.68

1.101.40

2.503.50

1.581.30

Achieving Manufacturing Repeatability,Efficiency, and Global Footprint Excellence

Antenna Contacts

GroundingContacts

Microphone &SpeakerContact

VibratorContact

Inductive ChargingContacts

from 0.8mm to 4.2mm. Partnered with ITTICS’s pioneering engineering capability andglobally deployed manufacturing excellence,we welcome your opportunity to define, execute, and field the next generation ofhand held interconnects and establish thecorrect supply chain, localized to your uniqueneeds. Over 5 years of production, 6 sigmaPPM results.