Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with...
Transcript of Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with...
![Page 1: Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals](https://reader031.fdocuments.us/reader031/viewer/2022022510/5adc4e847f8b9a4a268becc3/html5/thumbnails/1.jpg)
Non-Stick Grey
ABRATEK Non-Stick GreySilicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals and most plastics including epoxies.
Surface requirementsABRATEK Non-Stick Graphite can only be used on clean and dry surfaces, initially grit blasted. Grit blasting quality SA2, Alusilikat or corundum grain size 0.5 – 0.3 mm.
Application examplesPipe, rotary valves, rollers, silos, electric filter boxes and other applications where material accumulations of sticky materials is a challenge.
TURN
![Page 2: Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals](https://reader031.fdocuments.us/reader031/viewer/2022022510/5adc4e847f8b9a4a268becc3/html5/thumbnails/2.jpg)
ABRATEK Non-Stick Grey● Silicone-epoxy water-based● Color: Light grey● Consumption 1 liter = 1 m² by layer thickness of 1.2 mm● Surface drying time: 60 min. at 20 °C● Hand dry: 2 hours● Full hardness 5 days at 20 °C or 30 min. in an oven at 150 °C● Tensile strength: 1750psi● Operating temperature: 135 °C
![Page 3: Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals](https://reader031.fdocuments.us/reader031/viewer/2022022510/5adc4e847f8b9a4a268becc3/html5/thumbnails/3.jpg)
Non-Stick Blue
TURN
ABRATEK Non-Stick BlueEpoxy-silicone coating with unique grinding characteristics for adhesives and other sticky materials.
Surface requirementsABRATEK Non-Stick Graphite can only be used on clean and dry surfaces, initially grit blasted. Grit blasting quality SA2, Alusilikat or corundum grain size 0.5 – 1.0 mm.
Application examplesPipe, rotary valves, rollers, silos, electric filter boxes and other applications where material accumulations of sticky materials is a challenge.
![Page 4: Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals](https://reader031.fdocuments.us/reader031/viewer/2022022510/5adc4e847f8b9a4a268becc3/html5/thumbnails/4.jpg)
ABRATEK Non-Stick Blue● Silicone-epoxy water-based● Color: Light blue● Consumption 1 liter = 1 m² at 1.2 mm layer thickness● Surface drying time: 60 min. at 20 °C● Hand dry: 2 hours● Full hardness 5 days at 20 °C or 30 min. in an oven at 150 °C● Tensile strength: 1750psi● Operating temperature: 135 °C
![Page 5: Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals](https://reader031.fdocuments.us/reader031/viewer/2022022510/5adc4e847f8b9a4a268becc3/html5/thumbnails/5.jpg)
Non-Stick Graphite
ABRATEK Non-Stick GraphiteEpoxy-silicone coating with unique grinding characteristics for limestone, chalk, wood, concrete, fiberglass, metals, as well as most plastics including epoxies.
Surface requirementsABRATEK Non-Stick Graphite can only be used on clean and dry surfaces, initially grit blasted. Grit blasting quality SA2, Alusilikat or corundum grain size 0.5 – 1.0 mm..
ApplikationseksemplerPipe, rotary valves, rollers, silos, electric filter boxes and other applications where material accumulations of sticky materials is a challenge.
TURN
![Page 6: Non-Stick Grey - ABRATEK1).pdf · Non-Stick Grey ABRATEK Non-Stick Grey Silicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals](https://reader031.fdocuments.us/reader031/viewer/2022022510/5adc4e847f8b9a4a268becc3/html5/thumbnails/6.jpg)
ABRATEK Non-Stick Graphite● Silicone-epoxy water-based● Colour: Black● Consumption 1 liter = 1 m² at 1,2 mm layer thickness● Surface drying time: 60 min. at 20 °C● Hand dry: 2 hours● Full hardness 5 days at 20 °C or 30 min. in an oven at 150 °C● Tensile strength: 1750psi● Operating temperature: 135 °C