Non-Destructive Testing Non-Destructive Testing...Non-Destructive Testing Learning Outcomes •...
2
Engineering the Next Generation One day course Non-Destructive Testing Learning Outcomes • Explain the NDT process and its advantages • Recognise the various NDT methods and how to apply them • Gain a strong understanding of the specialist methods of NDT • Be able to compare the various NDT methods • Recognise the associated human factors General metallurgy • Introduction to Metals • Fundamentals of Metallurgy • Metallurgy for Non- Metallurgists Metals Processing • Casting of Metals • Hot & Warm Forging • Introduction to Heat Treatment • Heat Treatment for Professionals • Machining of Metals • Welding of Metals • Powder Metallurgy Metals Applications • Subsea Application of Metals • Metals for Aerospace • Metals for Gas Turbine Applications Metals & alloys • Carbon & Alloy Steels • Stainless Steels • Titanium Metallurgy • Nickel Metallurgy • Aluminium Metallurgy In-Service Performance • Introduction to Corrosion • Combating Metal Corrosion • Introduction to Fatigue • Failure Analysis & Prevention • Mechanical Testing • Non-Destructive Testing • Quality Assurance Certificate in Metallurgy QCF Level 3 Leadership & Management (ILM Levels 2, 3, 5) • Service Improvement • Coaching & Mentoring Higher Education BSc, BENg, MSc, MEng & PhD Courses in • Mechanical Engineering • Electrical / Electronic Engineering • Materials Engineering • Manufacturing • Machining • Advanced Manufacturing Management Other Continuous Professional Development (CPD) Services T: 0114 222 9939 E: [email protected] W: www.amrctraining.co.uk www.amrctraining.co.uk www.facebook.com/AmrcTrainingCentre twitter.com/AMRCTraining Advanced Manufacturing Park Wallis Way, Catcliffe Rotherham S60 5TZ Apprenticeships • Mechanical • Electrical • Manufacturing • Materials • Fabrication • Machining • Composites • Design Engineering the Next Generation A one day course ideal for managers, designers and engineers wishing to cover the essential principles and modern practices in NDT Course aims The course aims to provide an initial grounding to employees with no prior knowledge of Non- Destructive Testing (NDT) Attendees will gain a appreciation of the subject, its uses & limitations and the various NDT techniques available. Who should attend Typical attendees of this course include - managers, designers, engineers, senior supervisors and technicians, personnel working in the aerospace, automotive, marine, chemical, oil and gas industries. A module of the QCF level 3 Certificate in Metallurgy qualification. “Will enable me to speed up the design process as my background knowledge is better.” Tom Burnham Proforge “The skills and knowledge I acquired from this course will support future designs and improve product development for our company.” Mahesh Menon SMD Ltd Non-Destructive Testing One day course Advanced Manufacturing Research Centre Contact us T: 0114 222 9939 E: [email protected] W: www.amrctraining.co.uk
Transcript of Non-Destructive Testing Non-Destructive Testing...Non-Destructive Testing Learning Outcomes •...
Engineering the Next Generation
One day course
Advanced Manufacturing Research Centre
Non-Destructive TestingLearning Outcomes • Explain the NDT process and its advantages • Recognise the various NDT methods and how to apply them • Gain a strong understanding of the specialist methods of NDT • Be able to compare the various NDT methods • Recognise the associated human factors
General metallurgy• Introduction to Metals• Fundamentals of
Metallurgy• Metallurgy for Non-
Metallurgists
Metals Processing• Casting of Metals• Hot & Warm Forging• Introduction to Heat
Treatment• Heat Treatment for
Professionals• Machining of Metals• Welding of Metals• Powder Metallurgy
Metals Applications• Subsea Application of
Metals• Metals for Aerospace• Metals for Gas Turbine
Applications
Metals & alloys• Carbon & Alloy Steels• Stainless Steels• Titanium Metallurgy• Nickel Metallurgy• Aluminium Metallurgy
In-Service Performance• Introduction to Corrosion• Combating Metal
Corrosion• Introduction to Fatigue• Failure Analysis &
Prevention• Mechanical Testing• Non-Destructive Testing• Quality Assurance
Certificate in MetallurgyQCF Level 3
Leadership & Management (ILM Levels 2, 3, 5)• Service Improvement• Coaching & Mentoring
Higher EducationBSc, BENg, MSc, MEng & PhD Courses in• Mechanical Engineering• Electrical / Electronic
Engineering• Materials Engineering• Manufacturing • Machining• Advanced Manufacturing
Management
Other Continuous Professional Development (CPD) Services
T: 0114 222 9939
W: www.amrctraining.co.uk
www.amrctraining.co.uk
www.facebook.com/AmrcTrainingCentre
twitter.com/AMRCTraining
Advanced Manufacturing Park
Wallis Way, Catcliffe
Rotherham
S60 5TZ
Apprenticeships• Mechanical• Electrical• Manufacturing• Materials• Fabrication• Machining• Composites• Design
Engineering the Next Generation
A one day course ideal for managers, designers and engineers wishing to cover the essential principles and modern practices in NDT
Course aimsThe course aims to provide an initial grounding to employees with no prior knowledge of Non-Destructive Testing (NDT)
Attendees will gain a appreciation of the subject, its uses & limitations and the various NDT techniques available.
Who should attend Typical attendees of this course include - managers, designers, engineers, senior supervisors and technicians, personnel working in the aerospace, automotive, marine, chemical, oil and gas industries.A module of the QCF level 3 Certificate in Metallurgy qualification.
“Will enable me to speedup the design process asmy background knowledge is better.”Tom Burnham
Proforge
“The skills and knowledge I acquired from this course willsupport future designs and improve product development for our company.”
Mahesh Menon
SMD Ltd
Non-Destructive Testing
One day course
Advanced Manufacturing Research Centre
Contact us
T: 0114 222 9939
W: www.amrctraining.co.uk
Engineering the Next Generation
Internal Defects
• Ultrasonic inspection systems• Effect of defect orientation• Multiprobe ultrasonics• Radiographic techniques• Codes of practice
Industrial Systems
• Camera systems: cold rolled and galvanised steel strip
• DIRIS surface inspection system• Laser wave meters: profile measurement• MIDAS: corner system for rail• Eddy current encircling systems: round bar
production
Qualification and Certification
• Probability of detection• Signal-to-noise ratio and threshold level• Standards applicable to weld inspection• Standards for ultrasonic inspection• Standards for radiographic inspection
T: 0114 222 9939
W: www.amrctraining.co.uk
www.amrctraining.co.uk
www.facebook.com/AmrcTrainingCentre
twitter.com/AMRCTraining
Advanced Manufacturing Park
Wallis Way, Catcliffe
Rotherham
S60 5TZ
Non-Destructive Testing
Introduction to NDT
• Specified standards• Customer confidence• Surface versus volume methods• Manual versus automatic inspection
Visual Inspection
• How good is the human eye?• Advantages and disadvantages of visual inspection• Effect of illumination• DIRIS system• What are lasers used for?
Surface Defects
• Dye penetrant inspection• Magnetic particle techniques• Eddy current testing• Thermomatic and ac potential difference techniques• Industrial systems
Advanced Manufacturing Research Centre
www.amrctraining.co.uk www.amrctraining.co.uk
www.amrctraining.co.uk www.amrctraining.co.uk
www.amrctraining.co.uk www.amrctraining.co.uk
“Engineering the Next Generation” “Engineering the Next Generation”
“Engineering the Next Generation” “Engineering the Next Generation”
“Engineering the Next Generation” “Engineering the Next Generation”
Inspection Objectives Radiography
DIRIS System: Rail DefectsEddy Current Testing:
Rail Production
Ultrasonic Testing Standards
