7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 1/9

G 2升级操作说明1，Unpacked the file

2， Open Folder below

3， Choose firmware update tool

4，Choose something what above picture show

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 2/9

5， Choose the Eleventh Options

Choose Third Options, then check ok!

6， Check "catter#Config File!，then choose firmware update file

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 3/9

7， $lread% choose update file, thencheck &ownload!,

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 4/9

8，$fter check download!, connect G2 with computer, but make sure G2 is

 power off '

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 5/9

9，(ere, if not first time connect, %ou can waiting, until success, go to

step )*' +f it is first time update firmware, computer will notice %ou

instill the drive, like before'

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 6/9

10 Choose +nstall from a list or specific location! , then check net!

11，"elect -.rowse- and find the corresponding G2 driver' $nd click -/et-

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 7/9

Check Finish! drive instill success'

)2, Repeat step 3- 8. then go to step 13

13，升级过程中

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 8/9

7/17/2019 NO.1 G2 firmware update steps.doc

http://slidepdf.com/reader/full/no1-g2-firmware-update-stepsdoc 9/9

升级完成，将手表拿出来就好了。