NISN-004920 SS APX.qxd:00000 SS TX · 25.5"L x 8.1"W x 25.5"H • Maintenance-Free Battery Pack:...
Transcript of NISN-004920 SS APX.qxd:00000 SS TX · 25.5"L x 8.1"W x 25.5"H • Maintenance-Free Battery Pack:...
Dimensions
APX Series
2
56.15
8.1
2.916
10
19
19.5
11
20
6.3
26
APX45N
Features
Control HandleKeypad The controlhandle keypad providesPIN codes access toturn the truck on with-out a key. Up to 100driver ID numbers canbe saved, with eachassigned to one of fouradjustable performancemodes.
Offset Tiller Arm The offset tiller armallows the operator to comfortably walkbeside the truck foreasy operation, whilealso providing an excellent view of theforks, especially withtall loads.
Compact RobustDesign The APX Seriesfeatures a compact, robust, ergonomicdesign. Its flexible connection between the drive-unit and load-unit provides optimized traction over dock plates orrough floors.
4-Point Chassis The 4-point chassis,with 2 wheels on the drive side (drivewheel and casterwheel) plus 2 wheelson the load side, provides enhanced stability.
4,400 lb. capacity
3
Main Truck Specifications
CH
AR
AC
TER
ISTI
CS
FOR
KS
DIM
EN
SIO
NS
PERF
ORM
ANC
EC
HA
SS
ISB
ATTE
RY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
lb (kg)
in (mm)
volt
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
mph (kph)
mph (kph)
sec.
sec.
%
lb (kg)
in (mm)
in (mm)
in (mm)
HP (kW)
type
in (mm)
Ah
lb (kg)
in (mm)
type
Nissan
APX45N
PLL200
4400 (2000)
24 (600)
24
Walkie
Rubber / Vulkollan / Vulkollan
1x / 1 / 2
46.9 (1190)
26.8 (680)
6.3 (160)
1.9 (48)
8.1 (205)
2.95 (75)
66.3 (1685)
19.5 (495)
26 (660)
51.9 (1320)
61.4 (1560)
89 (2261)
3.7 (6.0)
3.4 (5.5)
3.0
4.5
10 / 8
630 (285)
9.1 x 2.8 (230 x 70)
5.5 x 2.4 (140 x 60)
2.95 x 3.9 (75 x 100)
1.34 (1.0)
AC CAN
25.5 x 8.1 x 25.5 (645 x 205 x 645)
250 / 260
310 (140) / 470 (215)
16.9 (430)
80A DIN Red
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Manufacturer’s Name
Model
Load Capacity
Load Center
Power Type
Operator Type
Tire Type
Wheels (x=driven)
Size - Standard Fork
Height - Standard Fork
Overall Dimensions
Wheelbase
Turning Radius
Right Angle Stacking¹
Speed - Travel
Speed - Lift
Gradeability - Max.
Truck Weight
Tires / Wheels
Drive system
Battery Compartment Size
Amp Hr Capacity
Weight
Lead Length
Connector
Model designation
Long model code
Electric
Drive / caster / load wheels
Drive / caster / load wheels
Nominal length
Outside spread
Individual Fork Width
Thickness
Raised position
Lowered position
Total length (to tip of forks)
Head length (to face of forks)
Overall width
Forks lowered
Minimum outside
48" L x 40" W pallet
No load
Full load
No load
Full load
No load / Full load
Standard forks (without battery)
Drive tire - dia. x width
Caster wheel - dia. x width
Load wheels - dia. x width
Drive motor
Drive controller
L x W x H
Maximum rate - 5-hr / 6-hr
Minimum / maximum
Position “B”
1 Add 6-8" for ease of operation. Includes 1" clearance on each side of load.
Technical Information APX SeriesStandard Equipment
1. AC drive motor and controller system
2. Infinitely variable forward/reverse drive control
3. 24-volt electrical system4. Offset, ergonomic tiller arm5. Wide steer head includes thumb
operated butterfly speed control, with lift, lower and horn buttons, and safety reversing switch
6. Slow travel with the handle upright (crawl speed)
7. Control panel with key pad includes PIN access with 4 adjustable performance settings
8. Backlit LCD displays date, time, error codes hour meter, andbattery discharge indicator(with lift cut out)
9. Adjustable auto power off10. Chill storage protection
to +34°F (+1°C)11. 4-point chassis with cushioned
caster wheel12. 2-section chassis13. Pallet entry rollers14. 9.1" x 2.8" rubber drive tire15. 5.5" x 2.4" Vulkollan caster wheel16. 2.95" x 3.9" Vulkollan single load
wheels17. 46.9" x 6.3" forks
Optional Equipment
1. 36" or 42" long U.S. style forks2. Industrial battery pack 3. 47.2" high load backrest4. Key switch (bypasses PIN
access)5. Cold storage protection to
–31°F (–35°C)6. Antistatic ground strap7. Vulkollan drive tire
Operator Control Features
The offset tiller arm allows the opera-tor to comfortably walk beside thetruck for easy operation, while alsoproviding an excellent view of theforks, especially with tall loads. Awide steering arc allows exceptionalturning radius with minimal effort.Spring-loaded handle and roomysteering control head promote effort-less movement into the operatingrange. Large thumb or fingertip-actuated butterfly speed controls provide easy and precise operation.Ergonomic layout of lift, lower and
horn buttons deliver comfortableoperation. Large switch on the end ofthe control head changes the truck’stravel direction if operator contact ismade. Maximum travel speed can bereduced through the creep switch inthe control keypad.
For ease of operation in tight areas, a tiller-up drive switch allows the APX to be driven at creep speed with the handle in a vertical position.
The modern, contoured design, minimizing sharp edges to reducedamage to product. Short trucklength and narrow width allows theAPX to maneuver in narrow orrestricted areas. Fork entry/exit slidesprovide easy access and positioningbetween pallet boards.
The control handle keypad providesPIN codes access to turn the truckon without a key. A stand-by modeallows temporary stops without thePIN codes needing re-entered torestart the truck. An optional key-switch bypasses the PIN codes toprovide access to the truck. If thetruck is left on, after a programmabletime delay will enter the stand-bymode. After further time delay, thetruck will power off to conserve energy.
The battery discharge indicator pro-vides the operator with a graphicalindication of the battery chargeremaining and includes lift cut outwhen the battery level is low. On-board diagnostics and self-check atstartup alert the operator if any errorcodes are encountered.
Efficient performance
Heavy-duty 1.3 Hp, three-phase ACdrive motor provides high power andtorque to handle tough applications,with peak performance throughoutthe battery range. Its advanced motorcontroller/AC FET inverter electroni-cally distributes power, as needed, tothe AC drive motor or DC pumpmotor for enhanced efficiency. Its ACdesign eliminates forward and reversecontactors, and uses electronic travelspeed control for precise, efficientperformance.
Battery
An optional battery pack, with built-incharger, features four maintenance-free, heavy-duty batteries with an 80A DIN red connector. Its automatic, built-in SCR charger features stop/startcapability, LED display, and plugs intoany grounded 110/120 volt AC outletfor easy charging.
• Battery compartment size: 25.5"L x 8.1"W x 25.5"H
• Maintenance-Free Battery Pack: 195 Ah/6h rating
Smart Electric Brake
Dual braking positions within the upper and lower handle movementrange. The drive unit is equipped withan electrical disc brake system that utilizes regenerative motor torque prior to brake actuation for less component wear and longer life.
Frame and Chassis
The APX Series features a robustchassis with a patented linkage system.The 4-point chassis, with 2 wheels onthe drive side (drive wheel and caster-wheel) plus 2 wheels on the load side,provides enhanced stability. A flexibleconnection between the drive-unit andload-unit provides constant groundcontact and exceptional traction overdock plates and rough floors.
Fork Assembly
Forks are 46.9" long and 6.3" wide,with 26.8" wide outside fork spread.Optional 42" long forks are also available, as well as various lengthEuro style forks. Pallet entry rollersfacilitate pallet entry and exit.
Wheels
9.1" diameter x 2.8" wide rubber drivewheel features tapered roller bearingsin sealed oil filled case. Vulkollancaster and load wheels, with stringguards, offer increased floor surfacecontact and help prevent debris fromgetting into axles and bearings.
Hydraulics
Heavy-duty integrated lift pump andDC motor features an overload valveto protect hydraulic components, andincludes a check valve and flow regulator. Hydraulic system features anintegrated motor, pump, fluid reservoir,
relief valves and filter, with a singlehose connecting the pump to the liftcylinder.
Drive Unit
Quiet, beveled gear drive system withsealed ball bearings, provides solidperformance with low steer effort. Five-nut removal of the drive tire simplifiesreplacement when needed. The entire power train is fully enclosedand operates in an oil bath, providinglong life and minimal maintenance.Heavy-duty tapered roller bearingsreduce steering effort and offer added durability.
Ease-of-Maintenance
Brushless AC drive motor uses fewer components and requires lessmaintenance for lower operating costs.CAN-Bus communication reduces the number of wires in the control harness,for reduced maintenance. On-boarddiagnostics and troubleshootingaccess through the control panel keypad, without the need for a separatehandset tool.
Removable cover exposes all majormechanical and electrical componentsfor inspection and maintenance. Anemergency cut-out allows the mag-netic brake to be released withoutpower, to tow the truck if a power failure occurs. The APX’s AC travelcontrol system eliminates directionalcontactors; maintenance needs andassociated costs are greatly reduced.
SS-APX 06-10Printed in U.S.A.
Nissan Forklift Corporation reserves the right to make product changes relating to colors, equipment, specificationsor available options without notice. For more information,contact your Nissan Forklift representative.
www.nissanforklift.com