NIL NIL - SELECT-SAN.RUselect-san.ru/upload/Catalogue_2009.pdf · DIN 4109 - Test registration no....
Transcript of NIL NIL - SELECT-SAN.RUselect-san.ru/upload/Catalogue_2009.pdf · DIN 4109 - Test registration no....
• NILplus WC flushers for concealed and exposed installation• WC flushers for normal and low-pressure applications• WC flusher sets• Flush pipes and accessories for WC flushers • Supply stops Page 1 - 9
• NILplus urinal flushers for concealed and exposed installation• Urinal flushers and urinal inlet-bows
• Accessories for urinal flushers Page 10 - 13
• Self-closing straight-way valves for shower systems
• NILplus water-saving shower sets Page 14 - 18• Accessories for shower sets• Foot-spraying equipment for exposed and semi-concealed installation
• Design angle valve series• NILplus angle valves with and without your personal company's logo• NILplus slanted seat valves Page 19 - 23
• Concealed valves (with internal threads or soldering connections)• Accessories for concealed valves
• Threaded nipples • Reduction pieces• Pipe couplings • Angled couplings• T - couplings• Forked fittings• Wall unions Page 37 - 43
• Compression fittings• ELB - compression fittings• Screw fittings• Threaded rosettes• Sliding rosettes Page 44 - 47
• Copper pipes
• Coils of copper pipes• Flexible connection hoses Page 48 - 53 ( hygienically tested and non-twistable)
03/2009
Product Catalogue
• Combined angle valves • Hose-taps • Slanted-seat hose taps • Draw-off taps • Pipe ventilation devices • Anti hose-burst devices • Accessories for combined anglevalves • Frost-proof draw-off taps Page 24 - 31
Page 32 - 36
NIL
Tabl
e of
Con
tent
s
Friedrich Gampper KGFichtestrasse 871540 Murrhardt
Germany
Fon + 49 - 7192 - 971 - 0Fax + 49 - 7192 - 971 - 105mail: [email protected]: www.nil-gampper.de
Material Quality
Surface Finish
Food Laws
DIN Conformity
We give the following warranty on all NIL fittings:
3 Years Warranty
This warranty does not cover the following:
2. Malfunctioning due to dirt in the water mains.
Your Advantage - The Wide Range of Reliable NIL Fittings
1. Defects arising due to incorrect installation, usage, unauthorized repair orfrost-damage.
3. Indirect claims for damages which occur as the result of a defectivefitting.
Adherence to prevailing regulations and correct handling of NIL fittings will guarantee you years of trouble-free usage.
Decades of experience in the manufacture of high-quality sanitary fittings and clear and well thought-outdesigns combined with the most up-to-date production and quality control methods guarantee the high qualitystandards of all NIL fittings.
commencing from the date of delivery. Should during this period undernormal circumstances, defects arise due to a material or production fault,then the defective fitting will either be repaired at our factory or replacedfree-of-charge.
NIL fittings which are visible after installation are given a special surfacefinish: Brass, which is ground, polished and either nickel- or chrome-plated.The non-visible parts of fittings for concealed installation have either a mattfinish, or can be nickel- or chrome-plated according to individualrequirements. Certain NIL fittings are also available, on request, in sanitarycolors.
NIL fittings conform to existing food laws, even if other productionmaterials are employed (seals, etc.).
NIL fittings conform to DIN standards, as far as these are applicable. Suchstandards relate to dimensions, hydraulic function and noise levels. Fittingstested according to these standards are marked accordingly. A continuousquality of all NIL products guarantees the highest quality standardpossible.
High Quality Materials and Manufacturing MethodsNIL fittings are generally made of hot-pressed brass manufacturedaccording to German industrial standards. Consequently they meet thedemands of highest quality in respect of solidity and water-tightness. Bodysections made by the chilled casting method are subjected to a particularlystringent water-tightness test.
3 Years Warranty
NILplus Toilet Flusher With Self-Cleaning Jet BoreThread Size Order-
No. Surface
WC - Flusher Model: NILplus 2001 DN 20 3/4" 2001
Din 3265 - Test registration no.DIN DVGW 449
DIN 4109 - Test registration no. DN 20 3/4" 2001-01P - IX 2716 / I
Group of Fittings I
With NILplus automatic flush system DN 20 3/4" 2001-51 whiteand individual flush control
Flow-pressure 1.2 - 4.0 bar
Outlet pipe according to DIN 3265 forflush-pipe ø 28 x ø 26 mm, incl. wall rosetteø 67 mm
Suitable for wash-out and wash-down WC´s
German patent no. 3 427 336German design reg. No. 363
Flush volume and flush rate adjustable !!!Spare / Replacement parts: 2001/10KCap and outlet nut(velours-chrome parts are non-returnable)
WC - Flusher Set model: NILplus 2001 DN 20 3/4" 2001S
consisting of:
WC - flusher model: NILplus 2001+ brass flus pipe ø 28 x ø 26 x 600 x 200 mm,straight type, chrome-plated
+ WC - connector ø 55 mm for pedestal WC
Polished-chrome / velours-chrome
Article Description
Polished-chrome / velours-chrome
Polished-chrome / white
velours-chrome
1
NIL Toilet Flusher With Self-Cleaning Jet BoreThread Size Order-
No. Surface
WC - Flusher Model: NILplus 2002 DN 20 3/4" 2002
DIN 3265 - Test registration no. 1032
DIN 4109 - Test registration no. DN 20 3/4" 2002-01P - IX 3597 / II
Group of Fittings II
With NILplus automatic flush system and individual flush control
Flow-pressure 1.2 - 4.0 bar
Outlet pipe according to DIN 3265 for flush pipe ø 28 x ø 26 mm, incl. wall rosette ø 67 mm
Suitable for wash-out and wash-down WC´s
Flush volume and flush rate adjustable !!!
WC - Flusher Set model: NILplus 2002 DN 20 3/4" 2002S1
consisting of:
WC - flusher model: NILplus 2002+ white plastic flush-pipe ø 28 x ø 26 x 700 x 250 mm, straight type+ WC - connector ø 55 mm for pedestal WC
WC - Flusher Set model: NILplus 2002 DN 20 3/4" 2002S2
consisting of:
WC - flusher model: NILplus 2002+ brass flush-pipe,ø 28 x ø 26 x 600 x 200 mmstraight type, chrome-plated
+ WC - connector ø 55 mm for pedestal WC
Polished-chrome / velours-chrome
Article Description
Polished-chrome / velours-chrome
Polished-chrome / white
Polished-chrome / white
2
Toilet FlusherThread Size Order-
No. Surface
WC - Flusher Model: D 69 DN 20 3/4" 122 chrome-DIN 3265 - Test registration no. platedDIN DVGW 514Testing applied for DIN EN 12541 forWC and urinal flusher
Flow pressure 1.2 - 4.0 bar
Solder fitting according to DIN 3265 for flush pipe ø 28 x ø 26 mm
Suitable for wash-out and wash-down WCs
Flush volume and flush rate adjustable !!!
WC - Flusher Set model: NIL D 69 DN 20 3/4" 122S1 chrome-plated
consisting of: Flush pipe:
whiteWC - flusher model: NIL D 69+ white plastic flush-pipe,ø 28 x ø 26 x 700 x 250 mm, straight type+ WC - connector ø 55 mm for pedestal WC
WC - Flusher Set model: NIL D 69 DN 20 3/4" 122S2 chrome-plated
consisting of:
WC - flusher model: NIL D 69+ brass flush-pipe ø 28 x ø 26 x 600 x200 mm, straight type, chrome-plated
+ WC - connector ø 55 mm forpedestal WC
Article Description
3
Toilet Flusher also for Low-Pressure Applications and SeawaterThread Size Order-
No. Surface
WC - Flusher Model: D 69 - 3/4" DN 20 3/4" 122-ND chrome-for low-pressure applications plated
Flow pressure: 0.6 - 2.5 bar
Solder fitting, flush pipe ø 30 x ø 28 mmø 32 x 30 mmSuitable for wash-down and siphonic WC´s
WC - Flusher Model: A 32 - 1" DN 25 1" 310 chrome-for low-pressure applications plated
Flow pressure 0.4 - 2.0 bar
Solder fitting, flush pipe ø 32 x ø 30 mm DN 25 1" 311 chrome-plated
Suitable for wash-down and siphonic Sea-waterWC´s, WC systems with water proofsupplied from header tanks.
WC systems on ships(Sea-water proof version)
Article Description
4
Accessories for Toilet FlushersThread Size Order-
No. Surface
Flush Pipes for WC Flushers DN 20 3/4"Brass
ø 28 x ø 26 x 600 x 200 mm straight 160ø 28 x ø 26 x 600 x 200 mm, 45 mm cranked 161ø 28 x ø 26 x 600 x 200 mm, 85 mm cranked 162ø 28 x ø 26 x 600 x 250 mm straight 163ø 28 x ø 26 x 600 x 250 mm, 45 mm cranked 164ø 28 x ø 26 x 600 x 250 mm, 85 mm cranked 165ø 28 x ø 26 x 700 x 200 mm straight 166ø 28 x ø 26 x 700 x 200 mm, 45 mm cranked 167ø 28 x ø 26 x 700 x 200 mm, 85 mm cranked 168ø 28 x ø 26 x 700 x 250 mm straight 169ø 28 x ø 26 x 700 x 250 mm, 45 mm cranked 170ø 28 x ø 26 x 700 x 250 mm, 85 mm cranked 171
Angled flush pipesø 28 x ø 26 mm, 45° 204ø 28 x ø 26 mm, 90° 191ø 28 x ø 26 mm, 130° 203
Flush Pipe Extensionsø 28 x ø 26 x 250 mm long 192ø 28 x ø 26 x 500 mm long 193
Flush Pipes for WC Flushers DN 20 3/4"Plastic, white or black
ø 28 x ø 26 x 700 x 250 mm straight 172 white/blackø 28 x ø 26 x 700 x 250 mm, 40 mm cranked 173 white/blackø 28 x ø 26 x 700 x 250 mm, 85 mm cranked 184 white/black
Angled flush pipesø 28 x ø 26 mm, 45° 194 white/blackø 28 x ø 26 mm, 90° 195 white/blackø 28 x ø 26 mm, 130° 196 white/black
Flush Pipe Extensionsø 28 x ø 26 x 250 mm long 197 white/blackø 28 x ø 26 x 500 mm long 198 white/black
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
5
Accessories for Toilet FlushersThread Size Order-
No. Surface
Flush Pipes for WC Flushers DN 25 1"Brass
ø 30 x ø 28 x 600 x 200 mm straight 182ø 32 x ø 30 x 600 x 200 mm straight 174ø 32 x ø 30 x 600 x 200 mm cranked 175ø 32 x ø 30 x 600 x 250 mm straight 176ø 32 x ø 30 x 600 x 250 mm cranked 177ø 32 x ø 30 x 700 x 200 mm straight 178ø 32 x ø 30 x 700 x 200 mm cranked 179ø 32 x ø 30 x 700 x 250 mm straight 180
ø 32 x ø 30 x 700 mm straight , for 183squatting type WCø 32 x ø 30 x 1000 mm straight , for 205squatting type WC
Flush Pipes for WC Flushers DN 25 1"Plastic, white or black
ø 32 x ø 30 x 700 x 200 mm straight 199 white/black201 white/black
Flush Pipe Clamp 189
as above 189-51 white
Connecting Bush 190for flush pipe ø 28 x ø 26 mm
185
186
187
188
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
ø 32 x ø 30 x 700 x 200 mm, 65 mmcranked
for flush pipe ø 28 mm, for distance fromwall of 15 - 85 mm, incl. masonry plug
chrome-plated
Compression fitting between flusher outletpipe and flush pipe
chrome-plated
WC - Connector for flush pipe ø 28 x ø 26mm and ø 32 x ø 30 mm, for WC - inlet ø 55mm (Euro - Norm)
as above, however with chrome-platedrosette
chrome-plated
WC - Connector for flush pipe ø 28 x ø 26mm and ø 32 x ø 30 mm, for WC - inlet ø 48mm (old type)
as above, however with chrome-platedrosette
chrome-plated
6
Toilet Flusher for Concealed Installation - With Self-Cleaning Jet Bore
Thread Size Order-No. Surface
WC Flusher for concealed installation DN 20 3/4" 2001UPModel: NILplus 2001DIN 3265 - Test registration no. DIN DVGW 449
DIN 4109 - Test registration no. P - IX 2716 / I
Group of fittings IWith NILplus automatic flush system and individual
flush control
Flow pressure 1.2 - 4.0 bar
Outlet pipe according to DIN 3265 for flush pipe ø
28 x ø 26 mm
Suitable for wash-out and wash-down WC´s
Scope of delivery:
Suitable for water inlet fittings ø 45 mm for wall-
mounted WC (order-no. 248/2), or for pedestal WC
(order-no. 248/1).
Height adjustment range: 600 ± 20 mm
Polystyrene jacket, temporary polystyrene covers
for inlet fittings.
Excluding cover plate, operating button and water inlet fittings.Please order separately before completion.
Cover Plate 2500
Concealed flush pipe 248ø 28 x ø 26 mm
Height adjustment range: 600 ± 20 mm
Polystyrene jacket, temporary polystyrene cover
Water inlet fitting for pedestal WC 248/1 White
Please order separately before completion !
Water supply fitting for wall mounted WC 248/2 WhiteInlet pipe ø 45 mm, 180 mm long, WC - connector
Please order separately before completion !
Not included in the scope of delivery of the aboveflusher model: 2001UP !
Brushed stainless steel
Incl. Operating button for concealed flusher model:NILplus 2001, installation frame and fixing screws.
(PLEASE NOTE: The concealed flush pipe isalready included in the scope of delivery of theflusher 2001UP. If otherwise required, you mayalso order it separately).
WC flusher with 3/4" screw connection; sound-proofinstallation case 214 x 180 x 83 mm deep; temporarypolystyrene cover for installation case, concealed flushpipe ø 28 x ø 26 mm.
Inlet pipe ø 45 mm, 300 mm long, WC - connector,wall rosette
Article Description
Not included in the scope of delivery of the aboveflusher model: 2001UP !
Concealed part
Cover plate
7
Toilet Flusher for Concealed Installation - With Self-Cleaning Jet Bore
Thread Size Order-No. Surface
WC flusher for concealed installation DN 20 3/4" 320
Model: UPD 32
Flow pressure: 1,2 - 5,0 bar
Suitable for wash-out and wash-down WC´s
Optional installation to the left or right side
Scope of delivery:WC flusher with 3/4" screw connection, installation
case size: 100 x 122 x 66 mm (wxhxd)
Temporary polystyrene cover for installation case
Suitable for water inlet fittings ø 45 mm for wall-
mounted WC (order-no. 248/2) or pedestal WC
(order-no. 248/1)
Including cover plate, and operating button
Concealed flush pipe 248ø 28 x ø 26 mm
Height adjustment range: 600 ± 20 mm
Polystyrene jacket, temporary polystyrene cover
Water inlet fitting for pedestal WC 248/1 White
Please order separately before completion !
Water supply fitting for wall mounted WC 248/2 WhiteInlet pipe ø 45 mm, 180 mm long, WC - connector
Please order separately before completion !
Article Description
Inlet pipe ø 45 mm, 300 mm long, WC - connector,wall rosette
Not included in the scope of delivery of the aboveflusher model: 2001UP !
Not included in the scope of delivery of the aboveflusher model: 2001UP !
(PLEASE NOTE: The concealed flush pipe isalready included in the scope of delivery of theflusher 2001UP. If otherwise required, you mayalso order it separately).
8
Supply - Stops for FlushersThread Size Order-
No. Surface
Supply stop model 54, 3/4" and 1/2" DN 20 3/4" 520for external pipework
with wall union DN 15 1/2" 521
Supply stop model 59, 1" DN 25 1" 540for external pipework
Supply stop model 54, 3/4" and 1/2" DN 20 3/4" 620for concealed pipework
with threaded rosette DN 15 1/2" 621
Supply stop model 54 S, 3/4" DN 20 3/4" 622
Supply stop model 59, 1" DN 25 1" 640for concealed pipeworkwith threaded rosette
chrome-plated
chrome-plated
chrome-plated
chrome-plated
for concealed pipework and lateralconnection of flusher
chrome-plated
Article Description
chrome-plated
chrome-plated
9
Urinal Flushers - With Self-Cleaning Jet BoreThread Size Order-
No. Surface
Urinal Flusher Model: NILplus 2003 DN 15 1/2" 2003
With NILplus automatic flush system
Flow pressure 1.2 - 4.0 bar
Flush quantity: constant 3 ± 0.5 l
Wall rosette 48 mm wide x 55 mm high
Application: all standard urinal bowls
Urinal Flusher Model: NILplus 2003A DN 15 1/2" 2003A
as above, however with supply stop
Spare / Replacement parts: 2003/10KCap and outlet nut(velours-chrome parts are non-returnable)
Polished-chrome / velours-chrome
velours-chrome
Article Description
DIN 3265 - Test registration no. DIN DVGW768
Flush pipe ø 18 mm and urinal connector(internal type)
Polished-chrome / velours-chrome
10
Urinal Flushers - Urinal Inlet BowsThread Size Order-
No. Surface
Urinal Flusher Model: DK 78 DN 15 1/2" 450Push-button operated
Flow pressure 1.0 - 4.0 bar
Urinal Flusher Model: DK 78 DN 15 1/2" 455as above, however with supply stop
Urinal Flusher Model: D 69 DN 15 1/2" 430Flush pipe ø 18 mm and wall rosette
Flow pressure 1.0 - 4.0 bar
Urinal inlet bow, 1/2" long type DN 15 1/2" 7450incl. Sliding rosette
Outlet thread 1/2"
Copper pipe ø 14 mm, 200 mm long
Order-no. 455: incl. Internal urinalconnector
Application: standard urinal bowls andsiphonic urinal bowls
chrome-plated
chrome-plated
Order-no. 430: incl. Internal urinalconnector
Order-no. 450: incl. Internal urinalconnector
chrome-plated
Article Description
Automatic flushing-time and -volume ,flush pipe ø 18 mm and wallrosette
chrome-plated
Application: standard urinal bowls (smallflush volume) and siphonic urinal bowls(large flush volume)
11
Accessories for Urinal FlushersThread Size Order-
No. Surface
Flush Pipes for Urinal FlusherModel: NILplus 2003Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 2003/8Pipe ø 18 x ø 16.5 x 300 mm, straight 2003/46Pipe 25 mm cranked 2003/61Pipe 30 mm cranked 2003/62Pipe 40 mm cranked 2003/63Pipe 50 mm cranked 2003/64
Flush Pipes for Urinal FlusherModel: DK 78Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 450/14Pipe ø 18 x ø 16.5 x 300 mm, straight 450/46Pipe 25 mm cranked 450/61Pipe 30 mm cranked 450/62Pipe 40 mm cranked 450/63Pipe 50 mm cranked 450/64
Flush Pipes for Urinal FlusherModel: D 69Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 430/15Pipe ø 18 x ø 16.5 x 300 mm, straight 430/46Pipe 25 mm cranked 430/61Pipe 30 mm cranked 430/62Pipe 40 mm cranked 430/63Pipe 50 mm cranked 430/64
Internal urinal connector 450/35for flush pipe ø 18 mm, incl. RosetteUrinal inlet: vertical, from top
External urinal connector 450/36
Urinal inlet: vertical, from top
Urinal bell-shaped cover 450/37for flush pipe ø 18 mmUrinal inlet: vertical, from top
chrome-plated
for flush pipe ø 18 mm, incl. Bell-shapedcover
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
12
Urinal Flusher for Concealed InstallationThread Size Order-
No. Surface
Urinal Flusher for concealed installationModel: 2003UP
DIN 3265 - Test registration no. DIN DVGW 768
Flow pressure 1.2 - 4.0 bar
Flush volume: constant 3 ± 1.0 l
Applications:
Duravit: Ben, Bill
Keramag: Monodet, Aller
Ideal Standard: Tonga, Penta, Pindar, Parama
DN 15 1/2" 2003UP
Installation and operating instructions.
2510
445 raw
Connecting pipe 1/2" with urinal connector 445/44K raw
Article Description
With NILplus automatic flush system and individualflush control
All standard siphonic and normal urinal bowls withmiddle inlet at back, e.g.
V&B: Colani, Omnia (Ebra), Omnia (Esta), Helios,Magnum, Stratos, Tiora, Viala
Concealed casing 162 x 162 x 73 mm includingscrews and plugs for fitting in wall recess or pre-fabricated wall sections.
Temporary protective cover and polystyrene coverincluding fixing screws.
Scope of delivery of parts required for 2nd stage ofinstallation:
Scope of delivery of parts required for 1st stage ofinstallation:
Urinal flusher including screw connections withintegrated supply stop on inlet and outlet sides.
Inlet side at top 1/2" internal thread, outside at bottom1/2" external thread.
Cover plate including operting button. Fitting framewith fixing screws. Installation and operatinginstructions.
Urinal inlet fitting for urinal flusher model: NILplus2003UPSliding connection, pipe, cap-nut, wall union,connection pipe 1/2" and urinal connector. The beused instaed of outlet screw fitting 1/2". Heightadjustment: ± 15 mm. Suitable for urinal bowls withinlet at back.
Brushed stainless steel
Concealed part
Cover plate
13
Self - Closing Straight-Way ValvesThread Size Order-
No. Surface
1/2" internal thread on both sides DN 15 1/2" 7001/2" external thread on both sides DN 15 1/2" 7011/2" captive nut connection on both sides DN 15 1/2" 7023/4" internal thread on both sides DN 20 3/4" 7033/4" external thread on both sides DN 20 3/4" 7043/4" captive nut connection on both sides DN 20 3/4" 705
DN 15 1/2" 710
DN 15 1/2" 720Self-closing straight way valve with pre-installed shower mixer tap
Backflow-preventer, covered "S"-connectors1/2", 3/4" external thread on bottom ofstraight way valve, completely pre-fixed
chrome-plated
chrome-plated
Concealed casing 120 x 96 x 66 mm deep,cover plate 150 x 125 mm, fixing screws,1/2" captive nut connections.
chrome-plated
Self-closing straight way valve withadjustable operating time, for concealedinstallation
Article Description
Self-closing straigh-way valves withadjustable operating time
chrome-plated
chrome-plated
14
Self - Closing Straight-Way ValvesThread Size Order-
No. Surface
DN 15 1/2" 730
DN 15 1/2" 740
DN 15 1/2" 750
chrome-plated
Self-closing straight way valve with pre-installed thermostatic mixer tap, forconcealed installation
Backflow preventer, dirt filters, 38°C antiscalding feature, concealed casing 225 x225 x 84 mm deep, cover plate 225 x 225mm, fixing screws, 1/2" captive nutconnections on the supply pipe and at thebottom, completely pre-fixed
chrome-plated
Self-closing straight way valve with pre-installed thermostatic mixer tap
Backflow preventor, dirt filters, 38°C antiscalding feature, covered + lockable "S"connectors 1/2" on the supply pipe, 3/4"external thread on the bottom, completelypre-fixed
Self-closing straight way valve with pre-installed shower tap mix-system, forconcealed installation
Backflow preventor, concealed casing 225 x225 x 84 mm deep, cover plate 225 x 225mm, fixing screws, "S"-connectors and 1/2"captive nut connections on the supply pipe,1/2" captive nut connection on bottom,completely pre-fixed
chrome-plated
Article Description
15
NILplus Shower - SetsThread Size Order-No. Surface
NILplus shower set 700.825.08 DN 15 1/2" 700.825.08Self-closing straight way valve
NILplus shower set 710.020.08 DN 15 1/2" 710.020.08
NILplus shower set 720.825.08 DN 15 1/2" 720.825.08
NILplus shower set 730.020.08 DN 15 1/2" 730.020.08
NILplus shower set 740.020.08 DN 15 1/2" 740.020.08
+ wall feed-through
NILplus shower set 750.020.08 DN 15 1/2" 750.020.08
Article Description
+ rising pipe incl. Screw fitting and wallunion+ shower head 20° and economy showerhead type: NOVAMATIC 8 l/min.
chrome-plated
chrome-platedSelf-closing straight way valve, for
concealed installation+ shower head 20° NOVAMATIC (showerarm 20°, rosette ø 70 mm, economy showerhead NOVAMATIC 8 l/min.)
chrome-platedSelf-closing straight way valve, combined
with shower mixer tap.+ riser pipe incl. Screw fittings and wallunion
+ shower arm 20° and economy showerhead type: NOVAMATIC 8 l/min.
chrome-platedSelf-closing straight way valve, combined
with shower mixer tap, for concealedinstallation.+ riser pipe incl. Screw fittings and wallunion+ shower arm 20° and economy showerhead type: NOVAMATIC 8 l/min.
chrome-platedSelf-closing straight way valve, combined
with thermostatic shower mixer tap.
+ shower head 20°, rosette ø 70 mm,economy shower head type: NOVAMATIC 8l/min.
+ shower head 20°, rosette ø 70 mm,economy shower head type: NOVAMATIC 8l/min.
chrome-platedSelf-closing straight way valve, combined
with thermostatic shower mixer tap, forconcealed installation
16
Accessories for Self-Closing Straight-Way ValvesThread Size Order-
No. Surface
Shower set 20° NOVAMATIC 025.08
Shower head NOVAMATIC 8 l/min 795.081/2" internal thread
Riser pipe 800
Wall feed through 1/2" x 3/4" 781long type, with sliding rosette
Angle connection 1/2" x 1/2" 780
Shower arm 20° 783
Article Description
(Shower arm 20°, rosette ø 70 mm,economy shower head NOVAMATIC 8l/min.)
chrome-plated
with compression nut 1/2" for pipe ø 15 mm,rectangular rosette
chrome-plated
chrome-plated
chrome-plated
Riser pipe ø 18 mm x 1000 mm, cranked,2 cap nuts 3/4", wall union 1/2" x 3/4"
chrome-plated
1/2" external thread on both sides, wallrosette ø 70 mm
chrome-plated
17
Foot Spraying Equipment and Accessories
Thread Size Order-No. Surface
DN 15 1/2" 481
For wall mounted installationFlow pressure 1.2 - 5.0 barFlusher 1/2", rectangular rosetteFlush pipe approx. 800 mm longIncl. Spray nozzle
DN 15 1/2" 486
For semi-concealed installationFlow pressure 1.2 - 5.0 barFlusher 1/2", rectangular rosetteHeight adjustable wall feed-through bwithrectangular wall rosetteOutlet pipe with spray nozzle and wallrosette
chrome-plated
Article Description
Foot spraying equipment with supplystop
chrome-plated
Foot spraying equipment with supplystop
18
Design - Angle ValvesThread Size Order-
No. Surface
Angle valve NILplus topform DN 15 1/2" 2005 PolishedDIN EN ISO 3822 chromeTest registration no. PA-IX 276/IAGroup of fittings IGerman patent no. 3223356Self-sealing connection thread 1/2"Sliding rosetteELB screw fitting 3/8" for copper pipeø 10 mm, with design cover cap
Angle valve NILplus crossline DN 15 1/2" 20051 PolishedAll metall angle valve with patented chromeNILplus upper part. German patentno. 3223356. Angle valve acc. to DIN 3227.Noise level acc. to DIN EN ISO 3822.Sels-sealing connection thread 1/2".Sliding rosette ø 55 mm, ELB-screwfitting 3/8" for copper pipe ø 10 mm withplug on design cover cap
Angle valve NILplus topline DN 15 1/2" 20052 PolishedAll metall angle valve with patented chromeNILplus upper part. German patentno. 3223356. Angle valve acc. to DIN 3227.Noise level acc. to DIN EN ISO 3822.Sels-sealing connection thread 1/2".Sliding rosette ø 55 mm, ELB-screwfitting 3/8" for copper pipe ø 10 mm withplug on design cover cap
Angle valve NILplus pinline DN 15 1/2" 20053 PolishedAll metall angle valve with patented chromeNILplus upper part. German patentno. 3223356. Angle valve acc. to DIN 3227.Noise level acc. to DIN EN ISO 3822.Sels-sealing connection thread 1/2".Sliding rosette ø 55 mm, ELB-screwfitting 3/8" for copper pipe ø 10 mm withplug on design cover cap
NILplus design cover cap 20051-11 Polishedchrome
For use in combination with flexiblehoses instead of copper pipes
Article Description
19
Thread Size Order-No. Surface
Angle valve 3/8", short type DN 10 3/8" 1222
Compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 3/8", short type DN 10 3/8" 1222/ELB
ELB screw fitting 3/8"for copper pipe ø 10 mm
Angle valve 3/8", short type DN 10 3/8" 1225Self sealingCompression fitting 3/8"for copper pipe ø 10 mm
Angle valve 3/8", short type DN 10 3/8" 1225/ELBSelf sealingELB screw fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", short type DN 15 1/2" 1322
Compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", short type DN 15 1/2" 1322/ELB
ELB screw fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", short type DN 15 1/2" 1325Self sealing
Compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", short type DN 15 1/2" 1325/ELBSelf sealing
ELB screw fitting 3/8"for copper pipe ø 10 mm
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
Angle Valves Suitable as stop- and throttle valves.DIN 3227 - Test reg. No. P-IX 723 / IA
20
Thread Size Order-No. Surface
Angle valve 3/8", long type DN 10 3/8" 1242
Sliding rosette, compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 3/8", long type DN 10 3/8" 1242/ELB
Sliding rosette, ELB screw fitting 3/8"for copper pipe ø 10 mm
Angle valve 3/8", long type DN 10 3/8" 1245Self sealingSliding rosette, compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 3/8", long type DN 10 3/8" 1245/ELBSelf sealingSliding rosette, ELB screw fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", long type DN 15 1/2" 1342
Sliding rosette, compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", long type DN 15 1/2" 1342/ELB
Sliding rosette, ELB screw fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", long type DN 15 1/2" 1345Self sealing
Sliding rosette, compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", long type DN 15 1/2" 1345/ELBSelf sealing
Sliding rosette, ELB screw fitting 3/8"for copper pipe ø 10 mm
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
Suitable as stop- and throttle valves.DIN 3227 - Test reg. No. P-IX 723 / IAAngle Valves
21
Thread Size Order-No. Surface
Angle valve 1/2", long type DN 15 1/2" 1342/Ewith drainage aperture
Sliding rosette, compression fitting 3/8"for copper pipe ø 10 mm
Angle valve 1/2", short type DN 15 1/2" 1362
Compression fitting 1/2"for copper pipe ø 12 mm
Angle valve 1/2", short type DN 15 1/2" 1365Self sealing
Compression fitting 1/2"for copper pipe ø 12 mm
Angle valve 1/2", long type DN 15 1/2" 1382
Sliding rosette, compression fitting 1/2"for copper pipe ø 12 mm
Angle valve 1/2", long type DN 15 1/2" 1385Self sealing
Sliding rosette, compression fitting 1/2"for copper pipe ø 12 mm
Angle valve 1/2", short type DN 15 1/2" 1504With sanitary head and tricorn handle
Compression fitting 1/2"for copper pipe ø 12 mm
Angle valve 1/2", long type DN 15 1/2" 1544With sanitary head and tricorn handle
Sliding rosette, compression fitting 1/2"for copper pipe ø 12 mm
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
Suitable as stop- and throttle valves.DIN 3227 - Test reg. No. P-IX 723 / IAAngle Valves
22
Thread Size Order-No. Surface
Slanted - seat valve 3/8" DN 10 3/8" 3122Short type
Compression fitting 3/8"for copper pipe ø 10 mm
Slanted - seat valve 1/2" DN 10 3/8" 3142Long type
Sliding rosette, compression fitting 3/8"for copper pipe ø 10 mm
Slanted - seat valve 1/2" DN 15 1/2" 4122Short type
Compression fitting 3/8"for copper pipe ø 10 mm
Slanted - seat valve 1/2" DN 15 1/2" 4142Long type
Sliding rosette, compression fitting 3/8"for copper pipe ø 10 mm
Slanted - seat valve 3/8" DN 10 3/8" 3123Short type
Compression fitting 3/8"for copper pipe ø 10 mm
Compression fitting 3/8"for copper pipe ø 12 mm
Slanted - seat valve 1/2" DN 15 1/2" 4124Short type
Compression fitting 3/8"for copper pipe ø 10 mm
chrome-plated
chrome-plated
chrome-plated
Clamp ring screwing 1/2" for copper pipe ø15 mm (compression nut 1/2" x ø 15 mm,brass clamp ring ø 15 mm)
Article Description
chrome-plated
chrome-plated
chrome-plated
Test reg. No. P-IX 116 / ISlanted - Seat Valves
23
Thread Size Order-No. Surface
Hose tap 3/8" x 3/4" DN 10 3/8" 6600
3/4" hose connection thread
3/8" connection thread
Hose tap as above DN 10 3/8" 6601however with pipe ventilation fitting
Combined angle valve 3/8" x 3/4" DN 10 3/8" 6610Sliding rosette ø 60 mm3/4" hose connection thread
3/8" connection thread
Dto., however with pipe ventilation fitting DN 10 3/8" 6611
Combined angle valve 1/2" x 3/4" DN 15 1/2" 6620
Dto., however with pipe ventilation fitting DN 15 1/2" 6621
Combined angle valve 1/2" x 3/4" DN 15 1/2" 6625with self - sealing connection threadDto., however with pipe ventilation fitting DN 15 1/2" 6626
Slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 66303/8" sanitary head with backflow prevention device
No. 6630 and tricorn sani-grip
3/8" connection thread, 3/4" hose
connection thread
as above, however with lockable grip cap DN 15 1/2" 6634 cr-plated
Slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6631
No. 66343/8" connection thread3/4" hose connection thread
as above, however with lockable grip cap DN 15 1/2" 6635 cr-platedNo. 6631
chrome-plated
Pipe ventilation fitting according to DIN 3266 - Test registration no. applied for
chrome-plated
chrome-plated
3/8" sanitary head with backflow preventiondevice and tricorn sani-grip
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
3/8" sanitary head with backflow preventiondevice and tricorn sani-grip
3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 718 / IA
3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 8349 / I
chrome-plated
chrome-plated
Hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)
Article Description
Hose tap for connection to existing anglevalves
3/8" sanitary head with backflow preventiondevice and tricorn sani-grip
24
Thread Size Order-No. Surface
Hose tap 1/2" x 3/4" DN 15 1/2" 6640Hose tap as intermediate valve for single draw-off points• 3/8" sanitary head with back flow preventor device and tricorn sani-grip• 3/4" hose connection thread
Hose tap 1/2" x 3/4" DN 15 1/2" 6641Hose tap as intermediate valve for single draw-off points
Safety combination "HD" with back flowpreventer and pipe ventilator
• 3/8" sanitary head with back flow preventor and tricorn sani-grip• 3/4" hose connection thread
Hose tap 3/4" DN 20 3/4" 6642Hose tap as intermediate valve for wall - mounted mixer taps
• 3/8" sanitary head with back flow preventor and tricorn sani-grip• 3/4" hose connection thread• 3/4" spacer
Hose tap 3/4" DN 20 3/4" 6643Hose tap as intermediate valve for wall - mounted mixer taps
Safety combination "HD" with back flowpreventer and pipe ventilator
• 3/8" sanitary head with back flow preventor and tricorn sani-grip• 3/4" hose connection thread• 3/4" spacer
Hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
25
Thread Size Order-No. Surface
NILplus hose tap 3/8" x 3/4" DN 10 3/8" 6800
3/4" hose connection thread
3/8" connection thread
NILplus hose tap as above DN 10 3/8" 6801however with pipe ventilation fitting
NILplus c ombined angle valve 3/8" x 3/4" DN 10 3/8" 6810Sliding rosette ø 60 mm3/4" hose connection thread
3/8" connection thread
Dto., however with pipe ventilation fitting DN 10 3/8" 6811
NILplus combined angle valve 1/2" x 3/4" DN 15 1/2" 6820
Dto., however with pipe ventilation fitting DN 15 1/2" 6821
NILplus combined angle valve 1/2" x 3/4" DN 15 1/2" 6825with self - sealing connection threadDto., however with pipe ventilation fitting DN 15 1/2" 6826
NILplus slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 68303/8" sanitary head with backflow prevention device
and NILplus handle
3/8" connection thread, 3/4" hose
connection thread
NILplus slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6631
3/8" connection thread3/4" hose connection thread
Article Description
Hose tap for connection to existing anglevalves
3/8" sanitary head with backflow preventiondevice and NILplus handle
NILplus hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)
3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 8349 / I
chrome-plated
chrome-plated
chrome-plated
3/8" sanitary head with backflow preventiondevice and NILplus handle
3/8" ELB screw fitting for copper pipeø 10 mmNoise level according to DIN 4109 /DIN 52218 - PA-IX 718 / IA
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Pipe ventilation fitting according to DIN 3266 - Test registration no. applied for
chrome-plated
chrome-plated
3/8" sanitary head with backflow preventiondevice and NILplus handle
26
Thread Size Order-No. Surface
NILplus hose tap 1/2" x 3/4" DN 15 1/2" 6840Hose tap as intermediate valve for single draw-off points• 3/8" sanitary head with back flow preventor device and NILplus handle• 3/4" hose connection thread
NILplus hose tap 1/2" x 3/4" DN 15 1/2" 6841Hose tap as intermediate valve for single draw-off pointsSafety combination "HD" with back flowpreventer and pipe ventilator• 3/8" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread
NILplus hose tap 3/4" DN 20 3/4" 6842Hose tap as intermediate valve for wall - mounted mixer taps• 3/8" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread• 3/4" spacer
NILplus hose tap 3/4" DN 20 3/4" 6843Hose tap as intermediate valve for wall - mounted mixer tapsSafety combination "HD" with back flowpreventer and pipe ventilator• 3/8" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread• 3/4" spacer
NILplus sink tap 1/2" x 3/4" DN 15 1/2" 6850• Adjustable distance 50 mm• 1/2" sanitary head with back flow preventor and NILplus handle• 3/4" hose connection thread• 1/2" compression fitting for copper pipe ø 10 mm
chrome-plated
NILplus hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
27
Thread Size Order-No. Surface
Sink tap 1/2" x 3/4" DN 15 1/2" 6650 chrome-plated
• Adjustable distance 50 mm• 1/2" sanitary head with back flow preventor and tricorn sani - grip• 3/4" hose connection thread• 1/2" compression fitting for copper pipe ø 10 mm
Sink bushing 6720 chrome-plated
• With hose connection• With copper pipe ø 12 mm x 500 mm• With 3/4" cap nut, with seal• Adjustable distance 70 mm
Draw - off tap DN 15 1/2" 6700with toggle - type handlehose connection 3/4" DN 20 3/4" 6710
Draw - off tap DN 15 1/2" 6701 chrome-with toggle - type handle platedhose connection 3/4" DN 20 3/4" 6711 chrome-
plated
Draw - off tap DN 15 1/2" 6702Safety combination "HD" with back flowpreventer and pipe ventilator DN 20 3/4" 6712with toggle - type handlehose connection 3/4"
Draw - off tap DN 15 1/2" 6703 chrome-Safety combination "HD" with back flow platedpreventer and pipe ventilator DN 20 3/4" 6713 chrome-with toggle - type handle platedhose connection 3/4"
Draw - off tap DN 15 1/2" 6704 chrome-plated
Safety combination "HD" with back flowpreventer and pipe ventilator
with sanitary head and tricorn handlehose connection 3/4"
as above, however with lockable grip cap DN 15 1/2" 6705 chrome-plated
as above, however with lock shield device DN 15 1/2" 6706 chrome-plated
dull-chrome plated finish
dull-chrome plated finish
Sink and draw-off taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator)
Article Description
dull-chrome plated finish
dull-chrome plated finish
28
Pipe ventilator, Anti hose-burst deviceThread Size Order-
No. Surface
Pipe ventilator 3/4", acc to DIN 3266 6900 chrome-plated
Anti Hose-Burst-Device 6901 chrome-3/4" internal x 3/4" external thread platedfor combined angle valves and draw-off taps, TÜV and GS approved
Article Description
29
Thread Size Order-No. Surface €
Scope of delivery gray colored !!!
DN 15 1/2" 7005
As no. 7005, however without pipe ventilator DN 15 1/2" 7000for wall thickness 150 mm - 275 mmFrostproof tap, with sanitary head and lock shield device DN 15 1/2" 7015
As no. 7015, however witout pipe ventilator DN 15 1/2" 7010for wall thickness 150 mm - 275 mmFrostproof tap, with sanitary head and lockable grip cap DN 15 1/2" 7025for wall thickness 150 mm - 275 mmAs no. 7025, however witout pipe ventilator DN 15 1/2" 7020for wall thickness 150 mm - 275 mm
Frostproof tap, with tricorn handle DN 15 1/2" 7055
As no. 7055, however without pipe ventilator DN 15 1/2" 7050
Frostproof tap, with sanitary head and lock shield device DN 15 1/2" 7065
As no. 7065, however witout pipe ventilator DN 15 1/2" 7060
Frostproof tap, with sanitary head and lockable grip cap DN 15 1/2" 7075
As no. 7075, however witout pipe ventilator DN 15 1/2" 7070
Article Description
Frostproof tap for wall thickness 150 mm - 275 mm. With tricorn handle • 1/2" sanitary head with grease chamber • Backflow preventer acc. DIN 1988 • Pipe ventilator acc. DIN 3266 • 3/4" hose connection • Wall rosette ø 85 mm with length adaption • Wall feed-through ø 26 mm and valve spindle with patented cut-off system • Close and stop plug for wall pipe and valve spindle when in carcass phase • Felt insulation • Water connection with 1/2" external thread • Angled connection 1/2" (order-no. 5224) and extension set (order-no. 7777) to be ordered separately
chrome-plated
chrome-plated
chrome-plated
Wall thickness 150 mm - 275 mm
Hydraulic values acc. DIN 3269, sound level values acc. DIN ISO 3822/I, test reg. PA-IX 9096/II
chrome-plated
for wall thickness 150 mm - 275 mmchrome-plated
chrome-plated
chrome-plated
Wall thickness 250 mm - 475 mm
chrome-platedfor wall thickness 250 mm - 475 mm
Frost-proof taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator) German patent no. 10315224
chrome-platedfor wall thickness 250 mm - 475 mm
chrome-platedfor wall thickness 250 mm - 475 mm
for wall thickness 250 mm - 475 mmchrome-platedfor wall thickness 250 mm - 475 mm
chrome-platedfor wall thickness 250 mm - 475 mm
30
Thread Size Order-No. Surface €
7777 raw brass
Extension set for frostproof tap
• Wall pipe extension ø 35 x 115 mm, with screws M 6 and o-ring seals
Frost-proof taps - Accessories German Patent no. 10315224
Article Description
• Valve spindle extension with plug-on sleeve and screws M 4
31
Concealed valves with internal thread on both sides.Package containing concealed + exposed part.
Extended mounting dimension by using extra long valve spindles !
Thread Size Order-No. Surface
Concealed valve 1/2" DN 15 1/2" 8700made of dezincification resistant brass1/2" x 1/2" internal thread. Installationdepth max. 50 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.
as above, however with acryllic grip (blue) DN 15 1/2" 8701Concealed valve (internal thread) as above, however with acryllic grip (red) DN 15 1/2" 8702
with tricorn grip
as above, however with lock shield device DN 15 1/2" 8705as above, however with closed cap DN 15 1/2" 8706
Concealed valve 3/4" DN 20 3/4" 8710made of dezincification resistant brass3/4" x 3/4" internal thread. Installationdepth max. 55 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.
Concealed valve as above, however with acryllic grip (blue) DN 20 3/4" 8711with acryllic grip as above, however with acryllic grip (red) DN 20 3/4" 8712
as above, however with lock shield device DN 20 3/4" 8715as above, however with closed cap DN 20 3/4" 8716
Concealed valve 1" DN 25 1" 8720made of dezincification resistant brass1" x 1" internal thread. Installationdepth max. 60 mm. Sanitary grease
Concealed valve chamber head with extra long valvewith lock shield device spindle. With balance sleeve, concealed
protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.
as above, however with acryllic grip (blue) DN 25 1" 8721as above, however with acryllic grip (red) DN 25 1" 8722
as above, however with lock shield device DN 25 1" 8725as above, however with closed cap DN 25 1" 8726
Concealed valvewith closed cap
Material acc. to DIN EN 50930. Dimensions acc. DIN 3512. Hydraulic values acc.DIN EN 1213. Noise behaviour acc. DIN EN 3822. DVGW model test certificateNW-6150BS0117.
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
32
Concealed valves with soldering connection on both sides.Package containing concealed + exposed part.
Extended mounting dimension by using extra long valve spindles !
Thread Size Order-No. Surface
Concealed valve DN 15 DN 15 ø 15 8730made of dezincification resistant brassSoldering connection ø 15 mm on both sides.Installation dim. max. 50 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.
as above,however with acryllic grip (blue) DN 15 ø 15 8731Concealed valve as above, however with acryllic grip (red) DN 15 ø 15 8732
(soldering connection)
with tricorn grip as above, however with lock shield device DN 15 ø 15 8735as above, however with closed cap DN 15 ø 15 8736Concealed valve DN 15 DN 15 ø 18 8740made of dezincification resistant brassSoldering connection ø 18 mm on both sides.Installation dim. max. 50 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.
as above, however with acryllic grip (blue) DN 15 ø 18 8741Concealed valve as above, however with acryllic grip (red) DN 15 ø 18 8742with acryllic grip
as above, however with lock shield device DN 15 ø 18 8745as above, however with closed cap DN 15 ø 18 8746Concealed valve DN 20 DN 20 ø 22 8750made of dezincification resistant brassSoldering connection ø 22 mm on both sides.Installation dim. max. 55 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.
as above, however with acryllic grip (blue) DN 20 ø 22 8751as above, however with acryllic grip (red) DN 20 ø 22 8752
Concealed valve as above, however with lock shield device DN 20 ø 22 8755with lock shield device as above, however with closed cap DN 20 ø 22 8756
Concealed valve 25 DN 25 ø 28 8760made of dezincification resistant brassSoldering connection ø 28 mm on both sides.Installation dim. max. 60 mm. Sanitary greasechamber head with extra long valvespindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm.Tricorn grip with blue and red socket.
as above, however with acryllic grip (blue) DN 25 ø 28 8761as above, however with acryllic grip (red) DN 25 ø 28 8762
Concealed valvewith closed cap as above, however with lock shield device DN 25 ø 28 8765
as above, however with closed cap DN 25 ø 28 8766
Material acc. to DIN EN 50930. Dimensions acc. DIN 3512. Hydraulic values acc.DIN EN 1213. Noise behaviour acc. DIN EN 3822. DVGW model test certificateNW-6150BS0117.
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
33
Concealed valvesConcealed parts - exposed parts - extension sets.
Extended mounting dimension by using extra long valve spindles !
Thread Size Order-No. Surface
Concealed set 1/2" DN 15 1/2" 8700-01 raw brassConcealed valve with 1/2" internal thread on both
sides. Sanitary grease chamber head 1/2" with
extra long valve spindle, concealed protection cap.
Concealed set 3/4" DN 20 3/4" 8710-01 raw brassConcealed part with internal thread Concealed valve with 3/4" internal thread on both
(concealed valve, protection cap) sides. Sanitary grease chamber head 3/4" with
extra long valve spindle, concealed protection cap.
Concealed set 1" DN 25 1" 8720-01 raw brassConcealed valve with 1" internal thread on both
sides. Sanitary grease chamber head 1" with extra long valve spindle, concealed protection cap.
Concealed set DN 15 ø 15 DN 15 ø 15 8730-01 raw brassConcealed part with soldering connection Concealed valve with soldering connection ø 15 on
(concealed valve, protection cap) both sides. Sanitary grease chamber head 1/2"
with extra long valve spindle, conc. protection cap.
Concealed set DN 15 ø 18 DN 15 ø 18 8740-01 raw brassConcealed valve with soldering connection ø 18 on
both sides. Sanitary grease chamber head 1/2"
with extra long valve spindle, conc. protection cap.Exposed part
(tricorn grip, sliding rosette, balance sleeve) Concealed set DN 20 ø 22 DN 20 ø 22 8750-01 raw brassConcealed valve with soldering connection ø 22 on
both sides. Sanitary grease chamber head 3/4"
with extra long valve spindle, conc. protection cap.
Concealed set DN 25 ø 28 DN 25 ø 28 8760-01 raw brassConcealed valve with soldering connection ø 28 on
Exposed part both sides. Sanitary grease chamber head 1"(acryllic grip, sliding rosette, balance sleeve) with extra long valve spindle, conc. protection cap.
Exposed part - tricorn grip 8700-02Tricorn grip, with blue + red socket.Balance sleeve, sliding rosette ø 70 mm.
Exposed part - acryllic gripExposed part Acryllic grip with adaptor piece. blue 8701-02
(lock shield device, sliding rosette, Balance sleeve, sliding rosette ø 70 mm. red 8701-03balance sleeve)
Exposed part - lock shield device 8705-02Lock shield device with adaptor sleeve.Balance sleeve, sliding rosette ø 70 mm.
Exposed part - closed cap 8706-02Exposed part Closed cap.
(closed cap, sliding rosette, balance sleeve) Balance sleeve, sliding rosette ø 70 mm.
Extension set for concealed valves 8795Extension +42 mm, with balance sleeveand spindle extension.
Extension set
Material acc. to DIN EN 50930. Dimensions acc. DIN 3512. Hydraulic values acc.DIN EN 1213. Noise behaviour acc. DIN EN 3822. DVGW model test certificateNW-6150BS0117.
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
34
NILplus concealed valves Variable installation depth 35 - 105 mm by means of a 4x adjustable wall pipe
Package containing concealed + exposed part.
Thread Size Order-No. Surface
NILplus concealed valve 1/2" DN 15 1/2" 8800Concealed part with variable installationdepth 35-105 mm. Casing 1/2" x 1/2" internalthread. Dezincification resistant brass,sanitarygrease chamber head with short spindle. Wallpipe and intermediate spindle piece 4x adjust-
able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mmas above, however with acryllic grip (blue) DN 15 1/2" 8801as above, however with acryllic grip (red) DN 15 1/2" 8802
as above, however with lock shield device DN 15 1/2" 8805as above, however with closed cap DN 15 1/2" 8806
NILplus concealed valve 3/4" DN 20 3/4" 8810Concealed part with variable installationdepth 40 - 110 mm. Casing 3/4" x 3/4" internalthread. Dezincification resistant brass,sanitarygrease chamber head with short spindle. Wallpipe and intermediate spindle piece 4x adjust-
able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mmas above, however with acryllic grip (blue) DN 20 3/4" 8811as above, however with acryllic grip (red) DN 20 3/4" 8812
as above, however with lock shield device DN 20 3/4" 8815as above, however with closed cap DN 20 3/4" 8816
NILplus concealed valve 1" DN 25 1" 8820Concealed part with variable installationdepth 45-115 mm. Casing 1" x 1" internalthread. Dezincification resistant brass,sanitarygrease chamber head with short spindle. Wallpipe and intermediate spindle piece 4x adjust-
able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mmas above, however with acryllic grip (blue) DN 25 1" 8821as above, however with acryllic grip (red) DN 25 1" 8822
as above, however with lock shield device DN 25 1" 8825as above, however with closed cap DN 25 1" 8826
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
35
NILplus concealed valves With sanitary ceramic head part
Variable installation depth 35 - 105 mm by means of a 4x adjustable wall pipePackage containing concealed + exposed part.
Thread Size Order-No. Surface €
NILplus concealed valve 1/2" DN 15 1/2" 8900Concealed part with variable installationdepth 35-105 mm. Casing 1/2" x 1/2" internalthread. Dezincification resistant brass,sanitaryceramic head part with short spindle. Wallpipe and intermediate spindle piece 4x adjust-
able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mm
NILplus concealed valve 3/4" DN 20 3/4" 8910Concealed part with variable installationdepth 40-110 mm. Casing 3/4" x 3/4" internalthread. Dezincification resistant brass,sanitaryceramic head part with short spindle. Wallpipe and intermediate spindle piece 4x adjust-
able. With polystyrene protection sleeve.Exposed part with NILplus handle, upper partwith integ. spindle and rosette ø 70 x 24 mm
chrome-plated
Article Description
chrome-plated
36
Thread sizeOrder-
no. Surface
Threaded nipple 3/8"ext. x 3/8"ext. 5100 raw5101 chrome-pl.
Threaded nipple 1/2"ext. x 1/2"ext. 5102 raw5103 chrome-pl.
Threaded nipple 3/4"ext. x 3/4"ext. 5104 raw5105 chrome-pl.
Threaded nipple 3/8"ext. x 1/2"ext. 5106 raw5107 chrome-pl.
Threaded nipple 1/2"ext. x 3/4"ext. 5108 raw5109 chrome-pl.
Reducing fitting 3/8"int. x 3/8"ext. 5110 raw5111 chrome-pl.
Reducing fitting 3/8"int. x 1/2"ext. 5112 raw5113 chrome-pl.
Reducing fitting 1/2"int. x 1/2"ext. 5114 raw5115 chrome-pl.
Reducing fitting 1/2"int. x 3/8"ext. 5116 raw5117 chrome-pl.
Reducing fitting 3/4"int. x 1/2"ext. 5118 raw5119 chrome-pl.
Screw socket 3/4"int. x 3/4"int. 5120 raw5121 chrome-pl.
Screw connection 1/2" 5130 raw5131 chrome-pl.
Screw connection 1/2" 5132 raw5133 chrome-pl.
Threaded nipples, Reducing fittings, Screw sockets, Screw connections
Article description
37
Pipe CouplingsThread Size Order-
No. Surface
Pipe coupling 3/8" x 3/8" 5508Compression fitting 3/8" for copper pipe ø 8 mmdto, with compression fitting for copper 5500pipe ø 10 mm
Pipe coupling 3/8" x 1/2" 5501Compression fitting 1/2" for copperpipe ø 12 mm
Pipe coupling 1/2" x 1/2"Compression fitting 1/2" for copper 5603pipe ø 10 mm
dto, with compression fitting 1/2" for 5600copper pipe ø 12 mm
dto, with compression fitting 1/2" for 5601copper pipe ø 14 mm
dto, with compression fitting 1/2" for 5602copper pipe ø 16 mm
Pipe coupling 1/2" x 3/8" 5661Compression fitting 3/8" for copper pipe ø 10 mm
Pipe coupling 3/8" internalthread x 3/8" external thread 5710Compression fitting 3/8" for copper pipe ø 8 mm
dto, with compression fitting 3/8" for 5700copper pipe ø 10 mm
Pipe coupling 1/2" internalthread x 1/2" external thread
Compression fitting 1/2" for copper 5803pipe ø 10 mm
dto, with compression fitting 1/2" for 5800copper pipe ø 12 mm
dto, with compression fitting 1/2" for 5801copper pipe ø 14 mm
dto, with compression fitting 1/2" for 5802copper pipe ø 16 mm
Pipe coupling 1/2" internal 5860thread x 3/8" external thread
Compression fitting 3/8" for copper pipe ø 10 mm
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
38
Pipe CouplingsThread Size Order-
No. Surface
Pipe coupling 3/8" x 3/8"
2 compression fittings 3/8" for copper 5558 chrome-pipe ø 8 mm plated
2 compression fittings 3/8" for copper 5550 chrome-pipe ø 10 mm plated
2 compression fittings 3/8" for copper 5556 chrome-pipe ø 10 mm and ø 8 mm plated
2 compression fittings 3/8" for copper 5557 chrome-pipe ø 12 mm plated
Pipe coupling 1/2" x 1/2"
2 compression fittings 1/2" for copper 5655 chrome-pipe ø 10 mm plated
2 compression fittings 1/2" for copper 5650 chrome-pipe ø 12 mm plated
2 compression fittings 1/2" for copper 5651 chrome-pipe ø 14 mm plated
2 compression fittings 1/2" for copper 5652 chrome-pipe ø 16 mm plated
2 compression fittings 1/2" for copper 5653 chrome-pipe ø 14 mm and ø 12 mm plated
2 compression fittings 1/2" for copper 5654 chrome-pipe ø 16 mm and ø 12 mm plated
Pipe coupling 1/2" x 3/8" 5660 chrome-plated
Compression fitting 1/2" for copper pipe ø 12 mm, with compression fitting 3/8"for copper pipe ø 10 mm
Article Description
39
Angled CouplingsThread Size Order-
No. Surface
Angled coupling 3/8" x 3/8"Compression fitting 3/8" for copper 5008fitting ø 8 mm
dto, with compression fitting 3/8" for 5000copper pipe ø 10 mm
Angled coupling 3/8" x 1/2" 5251
Compression fitting 1/2" for copper fittingø 12 mmAngled coupling 1/2" x 1/2"Compression fitting 1/2" for copper fitting ø 10 mm 5212
Compression fitting 1/2" for copper 5200fitting ø 12 mm
dto, with compression fitting 1/2" for 5210copper pipe ø 14 mm
dto, with compression fitting 1/2" for 5211copper pipe ø 16 mm
Angled coupling 1/2" x 3/8" 5250
Compression fitting 3/8" for copper fitting ø 10 mm
Angled coupling 3/8" internal thread
Compression fitting 3/8" for copper 5310fitting ø 8 mm
dto, with compression fitting 3/8" for 5300copper pipe ø 10 mm
Angled coupling 1/2" internal thread
Compression fitting 1/2" for copper 5403fitting ø 10 mm
Compression fitting 1/2" for copper 5400fitting ø 12 mm
dto, with compression fitting 1/2" for 5401copper pipe ø 14 mm
dto, with compression fitting 1/2" for 5402copper pipe ø 16 mm
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
40
Angled CouplingsThread Size Order-
No. Surface
Angled coupling 1/2" internal thread 5450
Compression fitting 3/8" for copper fitting ø 10 mm
Angled coupling 3/8" x 3/8"
2 compression fittings 3/8" for copper 5001pipe ø 8 mm
2 compression fittings 3/8" for copper 5002pipe ø 10 mm
2 compression fittings 3/8" for copper 5003pipe ø 10 mm and ø 8 mm
Angled coupling 1/2" x 1/2"
2 compression fittings 1/2" for copper 5207pipe ø 10 mm
2 compression fittings 1/2" for copper 5202pipe ø 12 mm
2 compression fittings 1/2" for copper 5203pipe ø 14 mm
2 compression fittings 1/2" for copper 5204pipe ø 16 mm
2 compression fittings 1/2" for copper 5205pipe ø 14 mm and ø 12 mm
2 compression fittings 1/2" for copper 5206pipe ø 16 mm and ø 12 mm
Angled coupling 1/2" x 3/8" 5252
Compression fitting 1/2" for copper pipe ø 12 mm, with compression fitting 3/8"for copper pipe ø 10 mm
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
41
Angled Couplings, T - CouplingsThread Size Order-
No. Surface
Angled coupling 1/2" x 1/2", long type 5065Threaded rosette, compression fitting 1/2" for copper pipe ø 12 mm
Angled coupling 1/2" x 3/8", long type 5070Threaded rosette, compression fitting 3/8" for copper pipe ø 10 mm
Angled coupling 1/2" x 1/2", long type 5270sliding rosette, compression fitting 1/2" for copper pipe ø 12 mm
Angled coupling 1/2" x 3/8", long type 5280sliding rosette, compression fitting3/8" for copper pipe ø 10 mm
T - coupling 3/8" x 3/8" x 3/8" 59003 compression fittings 3/8" for copper pipe ø 8 mmdto, however for copper pipe ø 10 mm 5901
dto., however for copper ø 10 mm, 5905ø 8 mm and ø 10 mm
T - coupling 1/2"x 1/2" x 1/2" 59023 compression fittings 1/2" for copper pipe ø 12 mmdto, however for copper pipe ø 14 mm 5903dto, however for copper pipe 16 mm 5904dto, however for copper pipe ø 12 mm, 5906ø 10 mm and ø 12 mmdto, however for copper pipe ø 14 mm, 5907ø 12 mm and ø 14 mmdto, however for copper pipe ø 16 mm, 5908ø 12 mm and ø 16 mm
T - coupling 3/8" x 3/8" x 3/8"
with flexible cap nut 3/8", with 59412 compression fittings 3/8" x ø 10 mmwith flexible cap nut 3/8", with 59422 ELB-fittings 3/8" x ø 10 mmwith flexible cap nut 3/8", without 5943compression fittings
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
42
T - Couplings, Forked Couplings, Wall UnionsThread Size Order-
No. Surface
T - Piece 1/2" x 1/2" x 1/2" 5911
Spacer 1/2" x 1/2" 6000
T - Piece - Set 59311/2" x 1/2" x 1/2"
T-Piece 1/2" x 3/4" x 3/4" 5913with 3/4" screwing
Spacer 3/4" x 3/4" 6001with 3/4" screwing
T - Piece - Set 59321/2" x 3/4" x 3/4"T - piece with 3/4" screwing
Forked fitting 1/2" x 1/2" x 1/2" 6052short type
T - Piece 1/2" 6065with compression fitting 3/8", sliding rosette for copper pipe ø 10 mm
T - Piece 1/2" 6066with compression fitting 3/8", sliding rosette for copper pipe ø 12 mm
Wall union 1/2" 6060Compression fitting 1/2", sliding rosette, for copper pipe ø 10 mm
Wall union 1/2" 6061Compression fitting 1/2", sliding rosette, for copper pipe ø 12 mm
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
43
Accessories for Angle Valves and CouplingsThread Size Order-
No. Surface
Compression fitting 3/8" E/13Kfor copper pipe ø 8 mm
Compression fitting 3/8" E/14Kfor copper pipe ø 10 mm
Compression fitting 3/8" E/15Kfor copper pipe ø 12 mm
Compression nut 3/8" x ø 8 mm E/16
Compression nut 3/8" x ø 10 mm E/17
Compression nut 3/8" x ø 12 mm E/18
Tapered ring 3/8" x ø 8 mm E/19 raw
Tapered ring 3/8" x ø 10 mm E/20 raw
Tapered ring 3/8" x ø 12 mm E/21 raw
Shim 3/8" x ø 8 mm E/22 raw
Shim 3/8" x ø 10 mm E/23 raw
Shim 3/8" x ø 12 mm E/24 raw
Compression seal 3/8" x ø 8 mm E/25 raw
Compression seal 3/8" x ø 10 mm E/26 raw
Compression seal 3/8" x ø 12 mm E/27 raw
ELB screw fitting 3/8" E/29Kfor copper pipe ø 10 mm
ELB nut 3/8" x ø 10 mm E/32
ELB compression sleeve E/35K raw3/8" x ø 10 mm
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
44
Accessories for Angle Valves and CouplingsThread Size Order-
No. Surface
Screw fitting 3/8" with flat seal E/70Kfor copper pipe ø 8 mm with 3/8" flange
Screw fitting 3/8" with flat seal E/71Kfor copper pipe ø 10 mm with 3/8" flange
Screw fitting 3/8" with flat seal E/72Kfor copper pipe ø 12 mm with 3/8" flange
Cap nut 3/8" x ø 8 mm, flat type E/70
Cap nut 3/8" x ø 10 mm, flat type E/71
Cap nut 3/8" x ø 12 mm, flat type E/72
Seal 3/8" x ø 8 mm E/73 rawSeal 3/8" x ø 10 mm E/74 rawSeal 3/8" x ø 12 mm E/75 raw
Compression fitting 1/2"for copper pipe ø 8 mm E/59Kdto. for copper pipe ø 10 mm E/60K
Compression fitting 1/2" E/61Kfor copper pipe ø 12 mm
Compression fitting 1/2" E/101Kfor copper pipe ø 14 mm
Compression fitting 1/2" E/102Kfor copper pipe ø 16 mm
Compression nut 1/2" x ø 8 mm E/59Compression nut 1/2" x ø 10 mm E/62Compression nut 1/2" x ø 12 mm E/63
Compression nut 1/2" x ø 14 mm E/103Compression nut 1/2" x ø 16 mm E/104
Tapered ring 1/2" x ø 8 mm E/86 raw
Tapered ring 1/2" x ø 10 mm E/105 rawTapered ring 1/2" x ø 12 mm E/106 rawTapered ring 1/2" x ø 14 mm E/107 rawTapered ring 1/2" x ø 16 mm E/108 raw
Shim 1/2" x ø 8 mm E/64 rawShim 1/2" x ø 10 mm E/65 rawShim 1/2" x ø 12 mm E/66 rawShim 1/2" x ø 14 mm E/67 rawShim 1/2" x ø 16 mm E/109 raw
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
45
Accessories for Angle Valves and CouplingsThread Size Order-
No. Surface
Compression seal 1/2" x ø 8 mm E/81 raw
Compression seal 1/2" x ø 10 mm E/68 raw
Compression seal 1/2" x ø 12 mm E/69 raw
Compression seal 1/2" x ø 14 mm E/110 raw
Compression seal 1/2" x ø 16 mm E/111 raw
Screw fitting 1/2" with flat seal E/76Kfor copper pipe ø 8 mm with 1/2" flange
Screw fitting 1/2" with flat seal E/77Kfor copper pipe ø 10 mm with 1/2" flange
Screw fitting 1/2" with flat seal E/78Kfor copper pipe ø 12 mm with 1/2" flange
Screw fitting 1/2" with flat seal E/79Kfor copper pipe ø 14 mm with 1/2" flange
Screw fitting 1/2" with flat seal E/80Kfor copper pipe ø 16 mm with 1/2" flange
Cap nut 1/2" x ø 8 mm, flat type E/76
Cap nut 1/2" x ø 10 mm, flat type E/77
Cap nut 1/2" x ø 12 mm, flat type E/78
Cap nut 1/2" x ø 14 mm, flat type E/79
Cap nut 1/2" x ø 16 mm, flat type E/80
Seal 1/2" x ø 10 mm E/82 raw
Seal 1/2" x ø 12 mm E/83 raw
Seal 1/2" x ø 14 mm E/84 raw
Seal 1/2" x ø 16 mm E/85 raw
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
46
Accessories for Angle Valves and CouplingsThread Size Order-
No. Surface
Threaded rosette 3/8" E/92
E/93 StainlessThreaded rosette 1/2" steel
Tap rosette 1/2" x ø 70 mm E/94 Stainlesssteel
Tap rosette 1/2" x ø 80 mm E/95 Stainlesssteel
Sliding rosette 3/8" E/41 Stainlesssteel
Sliding rosette 1/2" E/42 Stainlesssteel
Sliding rosette ø 70 mm E/44 Stainlesssteel
Sliding rosette 1/2" E/43 ABS chrome - plated
Article Description
chrome-plated brass
47
Copper Pipes ø 8 mm and ø 10 mm - Wall Thickness 0,70 mmThread Size Order-
No. Surface
Copper pipe ø 8 mm ø 8 x 300 8/3
straight at both ends ø 8 x 500 8/5
ø 8 x 700 8/7
ø 8 x 1000 8/10
ø 10 x 300 10/3Copper pipe ø 10 mm
ø 10 x 500 10/5straight at both ends
ø 10 x 700 10/7
ø 10 x 1000 10/10
Copper pipe ø 10 mm ø 10 x 300 11/3
3/8" flange (ø 14 mm) - straight ø 10 x 500 11/5
ø 10 x 700 11/7
ø 10 x 1000 11/10
ø 10 x 300 12/3Copper pipe ø 10 mm
ø 10 x 500 12/51/2" flange (ø 18 mm) - straight
ø 10 x 700 12/7
ø 10 x 1000 12/10
ø 10 x 300 30/3Copper pipe ø 10 mm
ø 10 x 500 30/53/8" flange - 1/2" flange
ø 10 x 700 30/7
ø 10 x 1000 30/10
ø 10 x 300 13/3Copper pipe ø 10 mm
ø 10 x 500 13/51/2" solder nipple (ø 18 mm) - straight
ø 10 x 700 13/7
ø 10 x 1000 13/10
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
48
Copper Pipes ø 10 mm - Wall Thickness 0,70 mmThread Size Order-
No. Surface
Copper pipe ø 10 mm ø 10 x 300 14/3
3/8" flange with 3/8" nut - straight ø 10 x 500 14/5
ø 10 x 700 14/7
ø 10 x 1000 14/10
ø 10 x 300 15/3Copper pipe ø 10 mm
ø 10 x 500 15/51/2" flange with 1/2" nut - straight
ø 10 x 700 15/7
ø 10 x 1000 15/10
Copper pipe ø 10 mm ø 10 x 300 17/3
3/8" flange on both sides, with nut 3/8" ø 10 x 500 17/5
ø 10 x 700 17/7
ø 10 x 1000 17/10
ø 10 x 300 18/3Copper pipe ø 10 mm
ø 10 x 500 18/51/2" flange on both sides, with nut 1/2"
ø 10 x 700 18/7
ø 10 x 1000 18/10
ø 10 x 300 19/3Copper pipe ø 10 mm
ø 10 x 500 19/5flange 1/2", with nut 1/2" - flange 3/8", with nut 3/8" ø 10 x 700 19/7
ø 10 x 1000 19/10
ø 10 x 300 21/3Copper pipe ø 10 mm
ø 10 x 500 21/5flange 1/2", with nut 1/2" - 1/2" soldered throttle shim, with 1/2" nut ø 10 x 700 21/7
ø 10 x 1000 21/10
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
49
Copper Pipes ø 12, ø 14 and ø 16 mm - Wall Thickness 0,70 mm
Thread Size Order-No. Surface
Copper pipe ø 12 mm ø 12 x 300 22/3
1/2" flange - straight ø 12 x 500 22/5
ø 12 x 700 22/7
ø 12 x 1000 22/10
ø 12 x 300 23/3Copper pipe ø 12 mm
ø 12 x 500 23/53/4" solder nipple - straight
ø 12 x 700 23/7
ø 12 x 1000 23/10
Copper pipe ø 12 mm ø 12 x 300 28/3
ø 12 x 500 28/5
ø 12 x 700 28/7
ø 12 x 1000 28/10
ø 14 x 300 24/3Copper pipe ø 14 mm
ø 14 x 500 24/51/2" flange - straight
ø 14 x 700 24/7
ø 14 x 1000 24/10
ø 16 x 300 31/3Copper pipe ø 16 mm
ø 16 x 500 31/51/2" flange - straight
ø 16 x 700 31/7
ø 16 x 1000 31/10
ø 16 x 300 32/3Copper pipe ø 16 mm
ø 16 x 500 32/51/2" flange, with 1/2" nut and seal - straight
ø 16 x 700 32/7
ø 16 x 1000 32/10
1/2" flange, with 1/2" nut and seal - straight
Article Description
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
50
Coils of Copper Pipes ø 8, ø 10, ø 12 mm - Wall thickness 0,70 mm - 0,80 mm
Thread Size Order-No. Surface
Coils of copper pipe ø 8 mm - 5 m long ø 8 25wall thickness 0,70 mm
Coils of copper pipe ø 10 mm - 5 m long ø 10 26wall thickness 0,70 mm
Coils of copper pipe ø 12 mm - 5 m long ø 12 27wall thickness 0,70 mm
Coils of copper pipe ø 10 mm - 5 m long ø 10 28wall thickness 0,8 mm
chrome-plated
Article Description
chrome-plated
chrome-plated
chrome-plated
51
Length in mm
Order-No. Surface
Flexible connection hose 300 40/3Compression fitting 3/8" for copper 500 40/5pipe 10 mm - connection sleeve ø 10 mm 1000 40/10
Flexible connection hose 300 41/3Cap nut 3/8" - Connection sleeve ø 10 mm 500 41/5
1000 41/10
Flexible connection hose 300 42/3Cap nut 1/2" - Connection sleeve ø 10 mm 500 42/5
1000 42/10
Flexible connection hose 300 43/33/8" cap nut at both ends 500 43/5
1000 43/10
Flexible connection hose 300 44/33/8" cap nut - 1/2" cap nut 500 44/5
1000 44/10
Flexible connection hose 300 45/31/2" cap nut at both ends 500 45/5
1000 45/10
Flexible connection hose 300 46/3Cap nut 3/8" - Compression fitting 3/8" 500 46/5for copper pipe ø 10 mm 1000 46/10
Flexible connection hose300 47/3
Cap nut 1/2" - External thread 1/2" 500 47/51000 47/10
Flexible connection hose200 48/2
Cap nut 3/8" - Angled connection 3/8" 300 48/3500 48/5
Flexible connection hose200 49/2
Cap nut 1/2" - Angled connection 1/2" 300 49/3500 49/5
Test acc. to DVGW W-543, DVGW W-270 and BGA KTW A and certified acc. to
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Flexible connection hoses with hygienically tested silicone inliner and stainless steel braiding. Hoses acc. to DVGW W 543, group 1
Article Description
chrome-plated
chrome-plated
52
Length in mm
Order-No. Surface
Flexible connection hose 300 50/3Compression fitting 3/8" for copper 500 50/5pipe 10 mm - connection sleeve ø 10 mm 1000 50/10
Flexible connection hose 300 51/3Cap nut 3/8" - Connection sleeve ø 10 mm 500 51/5
1000 51/10
Flexible connection hose 300 52/3Cap nut 1/2" - Connection sleeve ø 10 mm 500 52/5
1000 52/10
Flexible connection hose 300 53/33/8" cap nut at both ends 500 53/5
1000 53/10
Flexible connection hose 300 54/33/8" cap nut - 1/2" cap nut 500 54/5
1000 54/10
Flexible connection hose 300 55/31/2" cap nut at both ends 500 55/5
1000 55/10
Flexible connection hose 300 56/3Cap nut 3/8" - Compression fitting 3/8" 500 56/5for copper pipe ø 10 mm 1000 56/10
Flexible connection hose300 57/3
Cap nut 1/2" - External thread 1/2" 500 57/51000 57/10
Flexible connection hose200 58/2
Cap nut 3/8" - Angled connection 3/8" 300 58/3500 58/5
Flexible connection hose200 59/2
Cap nut 1/2" - Angled connection 1/2" 300 59/3500 59/5
Test acc. to DVGW W-543, DVGW W-270 and BGA KTW A and certified acc. to
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
chrome-plated
Flexible connection hoses with hygienically tested silicone inliner and stainless steel braiding. Hoses acc. to DVGW W 543, group 1
Article Description
chrome-plated
chrome-plated
53