NIKKEN ROTARY TABLES rotary table catalog 2014...Nikken Rotary Tables for Okuma 3 TABLE OF CONTENTS...
Transcript of NIKKEN ROTARY TABLES rotary table catalog 2014...Nikken Rotary Tables for Okuma 3 TABLE OF CONTENTS...
CAT2014-OKUMA-RT FEB.2014
NIKKEN ROTARY TABLESFOR OKUMA
Live & Static ToolingOKUMA CAPTAIN SERIES LATHESL370-M, L370-MW, L470-M, GENOS L-300M, GENOS L-200M
TAPER PLUS TOOL HOLDERSTaper and Flange Contact Toolholders
Dual Contact holders for high precision and higher rigidity!
CAT2014-TAPERPLUS JAN. 2014
Okuma Captain Series Lathes Live & Static Tooling Catalog Tooling System Catalog
Okuma LBEX Series Lathes Live Tooling Catalog Taper Plus Catalog
CAT2013-OK-CAP
CAT2014-TAPERPLUSCAT2014-OK-LBEX
CAT2011-TC
Contact us for more information on our products lines.
Nikken Rotary Tables for Okuma 3
TABLE OF CONTENTS
Nikken Rotary Table Features
Tabl
e of C
onte
nts
Nikken Rotary Features Pg. 4-5
Okuma Interface Numbers Pg. 6-7
VERTICAL
Genos M SeriesOkuma M460-VE | M560-V Pg. 8CNC180/202, 260/3025AX-130, 201
MB-V SeriesOkuma MB-46VA/B | MB56-VA/B | MB-66VA/B Pg. 12CNC180/202, 260/302, 321, 401, B350, B450 5AX-130, 201, 230, 250
MA-Series Vertical MA-550VB | MA-650VB Pg. 24CNC260/302, 321, 401, B350, B4505AX-130, 201, 230, 250
Millac SeriesOkuma 761V | 852V | 1052VII Pg. 32CNC302, 321, 401, 601, B350, B4505AX-250, 350
HORIZONTAL
MA-Series Horizontal Machine CentersOkuma MA-500HA/B | MA-600HA/B | MA-800HB Pg. 40CNC321T, 401T, 601T
MB-Series Horizontal Machine CentersOkuma MB-4000H | MB-5000H | MB-8000H Pg. 42CNC260T, 321T, 401T, 601T
Standard Multi-Spindle Units Pg. 46
Motor Style Options Pg. 47
Tailstock & Support Table Accessories Pg. 48
Nikken Controller Specifications Pg. 49
Rotary Table Dimensions Pg. 50
5-Axis Table Dimensions Pg. 56
Nikken Rotary Tables for Okuma4
Rota
ry Ta
ble F
eatu
res
Nikken Rotary Table Features
Patented Solid Carbide Worm Screw and Heat Treated Steel Worm Wheel • Hand matched and paired to maintain maximum thread engagement
• Four point bearing support system and eccentric housing structure
• Minimal wear compared to traditional bronze wheel configuration
Nikken's unique design shrink fits the worm wheel onto the solid faceplate and quill body. This along with the hand pairing of the carbide worm screw eliminates backlash.
InsideHRC 36
Depth 0.1mm HV930
The material used for the Nikken worm wheel is custom made steel, specially hardened and ion nitrided on the teeth. As a consequence, frictions between the gears are eliminated.
A much shorter distance from face plate to gear allows for greater torsional forces to be sustained.
The fine pitch of the worm wheel contributes to 4 arc second repeatability.
Bolt-on bronze wheel to a two pieces faceplate and quill design. Configuration relies on the malleability of the worm wheel to deform around the shape of the worm screw to eliminate backlash.
Bolt-on faceplate to quill base
Soft worm wheels wear much quicker, resulting in indexing inaccuracies and unnecessary maintenance.
1.
2.
Nikken Rotary Tables for Okuma 5
Nikken Rotary Table Features
Unique Faceplate andWorm Wheel Assembly • Unique shrunk fit worm wheel design onto solid faceplate and quill body for high precision concentricity
• Shorter distance from faceplate to gear allows for greater torsional forces to be sustained
• Fine pitch contributes to 4 arc second repeatability
Independent Tubular Thrust and Radial Bearings • Custom paired and matched for every rotary table
• Provide vibration dampening and internal gear protection
• Extreme rigidity and concentric accuracy from needle roller bearings
3.
4. Feat
ures
and T
echo
nogy
Okum
a Int
erfa
ce N
umbe
rs
Machine Interface Number
M460-VE M560-V MB-46VA/B MB56-VA/B MB-66VA/B MA-650VB MA-550VB
Machine Option # 661 662 631 632 633 606 605
CNC180 1467 661-1467-9 662-1467-9 631-1467-9 632-1467-9 - - -
CNC202 1490 661-1490-9 662-1490-9 631-1490-9 632-1490-9 - - -
CNC260 1489 661-1489-9 662-1489-9 631-1489-9 632-1489-9 633-1489-9 606-1489-9 605-1489-9
CNC302 1491 661-1491-9 662-1491-9 631-1491-9 632-1491-9 633-1491-9 606-1491-9 605-1491-9
CNC321 1474 - - - - 633-1474-9 606-1474-9 605-1474-9
CNC401 1488 - - - - 633-1488-9 606-1488-9 605-1488-9
CNC601 14C9 - - - - - - -
CNCB350 14F1 - - - - 633-14F1-9 606-14F1-9 605-14F1-9
CNCB450 1418 - - - - 633-1418-9 606-1418-9 605-1418-9
5AX-130 1468 661-1468-9 662-1468-9 631-1468-9 632-1468-9 - 606-1468-9 605-1468-9
5AX-201 14F2 661-14F2-9 662-14F2-9 631-14F2-9 632-14F2-9 633-14F2-9 606-14F2-9 605-14F2-9
5AX-230 1402 - - - - 633-1402-9 606-1402-9 605-1402-9
5AX-250 1476 - - - - 633-1476-9 606-1476-9 605-1476-9
5AX-350 1485 - - - - - - -
260T 1471 - - - - - - -
321T 14F3 - - - - - - -
401T 14F4 - - - - - - -
601T 14F5 - - - - - - -
*For left hand mount motor style, back mount motor style, multi-spindle units, and interfaces for P200 controllers please contact us.
"-9" represents interface numbers for P300 controller only. Please contact us with inquiries for a P200 controller.
Okuma Interface Numbers
Nikken Rotary Tables for Okuma6
Machine InterfaceNumber
MILLAC 761V MILLAC 852V MILLAC 1052VII MA-500HA/B MA-600HA/B MA-800HB MB-4000H MB-5000H MB-8000H
Machine Option # 2X5 2X6 2X7 615 616 617 644 645 647
CNC180 1467 - - - - - - - - -
CNC202 1490 - - - - - - - - -
CNC260 1489 - - - - - - - - -
CNC302 1491 2X5-1491-9 - - - - - - - -
CNC321 1474 2X5-1474-9 2X6-1474-9 - - - - - - -
CNC401 1488 2X5-1488-9 2X6-1488-9 2X7-1488-9 - - - - - -
CNC601 14C9 2X5-14C9-9 2X6-14C9-9 2X7-14C9-9 - - - - - -
CNCB350 14F1 2X5-14F1-9 - - - - - - - -
CNCB450 1418 2X5-1418-9 2X6-1418-9 - - - - - - -
5AX-130 1468 - - - - - - - - -
5AX-201 14F2 - - - - - - - - -
5AX-230 1402 - - - - - - - - -
5AX-250 1476 - 2X6-1476-9 - - - - - - -
5AX-350 1485 - 2X6-1485-9 2X7-1485-9 - - - - - -
260T 1471 - - - - - - 644-1471-9 - -
321T 14F3 - - - 615-14F3-9 - - - 645-14F3-9 -
401T 14F4 - - - 615-14F4-9 616-14F4-9 - - 645-14F4-9 -
601T 14F5 - - - - 616-14F5-9 617-14F5-9 - - 647-14F5-9
*For left hand mount motor style, back mount motor style, multi-spindle units, and interfaces for P200 controllers please contact us.
"-9" represents interface numbers for P300 controller only. Please contact us with inquiries for a P200 controller.
Okum
a Int
erfa
ce N
umbe
rs
Okuma Interface Numbers
Nikken Rotary Tables for Okuma 7
Nikken Rotary Tables for Okuma8
GENERAL MACHINE SPECIFICATIONS
Faceplate Diameter Brake System
Brake Torqueft. lbs.
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight (lbs.)
Driving Torque ft. lbs.
Repeatability (Arc sec.)
7.09"/7.87" (180/200 mm) AIR 223.5 0.001⁰ 22.2 1/90 20 sec 99/121 53/106 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs.
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs.)
Driving Torque ft. lbs.
Repeatability (Arc sec.)
10.24"/11.81" (260/300 mm) AIR 433.6 0.001⁰ 16.6 1/120 20 sec 253/264 141.6 ±4
CNC260/302
CNC180/202
Okuma: M460-VE | M560-V Ge
nos M
Serie
s
For left hand motor style, multi-spindle units, and back mount motor style please contact us.
For Support Tailstock and ChuckAccessories, go to page 44
Air booster available. Please contact us for more information.
• Small foot print with a powerful brake.
• Hardened gear eliminates constant backlash adjustment.
• High speed (44.4RPM) available upon request.
• Large ID hole with H7 tolerance for fixture standardization.
• Highest weight load capacity in its class.
• The rotary table can be used vertically or horizontally depending on the application.
• Various options are available to meet all work holding, fixturing and chucking requirements.
M460-VE M560-VTRAVEL X-AXIS 30.00 in. (762 mm) 41.34 in. (1,050 mm)TRAVEL Y-AXIS 18.11 in. (460 mm) 22.05 in. (560 mm)TRAVEL Z-AXIS 18.11 in. (460 mm)TABLE TO SPINDLE NOSE 5.91 ~ 24.02 in. (150 ~ 610 mm)MAX. LOAD CAPACITY 1,540 lbs. (700 kg) 1,980 lbs. (900 kg)FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,262 ipm (40 / 40 / 32 m/min.)Okuma Interface # CNC 180 661-1467-9 662-1467-9Okuma Interface # CNC 202 661-1490-9 662-1490-9Okuma Interface # CNC 260 661-1489-9 662-1489-9Okuma Interface # CNC 302 661-1491-9 662-1491-9
Nikken Rotary Tables for Okuma 9
For more detailed information, please contact us.
Okuma: M460-VE | M560-V
Tailstock/SupportTable Part #
M460-VE M560-V
X-Y Axis Travel 30.00" X 18.11" (762 X 460mm) 41.34" X 22.06" (1050 X 660mm)
X-Y Table Size 39.37" X 18.11" (1000 X 460mm) 51.28" X 22.05" (1300 X 560mm)
CNC 180/202
X-Work Envelope
Fig 1 P-125S 17.05" (433mm) 28.39" (721mm)
Fig 2 PBA-135 15.71" (399mm) 27.05" (687mm)
Fig 3 n/a n/a n/a
Fig 4 TAT 170 18.58" (472mm) 29.92" (760mm)
Y-Work Envelope 10.24" (260mm) 10.24" (260mm)
CNC 260/302
X-Work Envelope
Fig 1 P-170S 13.46" (342mm) 24.80" (630mm)
Fig 2 PBA-170 15.71" (399mm) 25.16" (639mm)
Fig 3 H-170S 7.05" (174mm) 18.38" (467mm)
Fig 4 TAT250 16.42" (417mm) 27.76" (705mm)
Y-Work Envelope 12.99" (330mm) 12.99" (330mm)
Geno
s M Se
ries
Figure 1 Figure 2
Figure 4Figure 3
Nikken Rotary Tables for Okuma10
GENERAL MACHINE SPECIFICATIONS
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
4” (105mm) AIR 151 223.5 0.001⁰ 22.2 11.1 1/90 1/180 30 60 219.3 53 ±4 ±6
5AX-201
5AX-130
Okuma: M460-VE | M560-V
M460-VE M560-VTRAVEL X-AXIS 30.00 in. (762 mm) 41.34 in. (1,050 mm)
TRAVEL Y-AXIS 18.11 in. (460 mm) 22.05 in. (560 mm)
TRAVEL Z-AXIS 18.11 in. (460 mm)
TABLE TO SPINDLE NOSE 5.91 ~ 24.02 in. (150 ~ 610 mm)
MAX. LOAD CAPACITY 1,540 lbs. (700 kg) 1,980 lbs. (900 kg)
FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,262 ipm (40 / 40 / 32 m/min.)
Okuma Interface # 5AX-130 661-1468-9 662-1468-9
Okuma Interface # 5AX-201 661-14F2-9 662-14F2-9
Geno
s M Se
ries
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
7.8” (200mm) AIR 433.6 433.6 0.001⁰ 22.2 16.6 1/90 1/120 20 60 352.7 53 ±4 ±6
For Support Tailstock and ChuckAccessories, go to page 48
For multi-spindle units please contact us.
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
Air-hydraulic booster not recommended. Please contact us for more information.
Nikken Rotary Tables for Okuma 11
For more detailed information, please contact us.
Okuma: M460-VE | M560-V
Geno
s M Se
ries
Tailstock/SupportTable Part #
M460-VE M560-V
X-Y Axis Travel 30.00" X 18.11" (762 X 460mm) 41.34" X 22.06" (1050 X 660mm)
X-Y Table Size 39.37" X 18.11" (1000 X 460mm) 51.28" X 22.05" (1300 X 560mm)
5AX-130
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 30.12" (765mm) 42.17" (1071mm)
C 25.43" (646mm) 37.24" (946mm)
5AX-201
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 28.15" (715mm) 40.20" (1021mm)
C 23.46" (596mm) 35.28" (896mm)
Figure 1
Nikken Rotary Tables for Okuma12
GENERAL MACHINE SPECIFICATIONS
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
10/12” (206/30mm) AIR 433.6 0.001⁰ 16.6 1/120 20 264.5 141.6 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
7” (180mm) AIR 223.5 0.001⁰ 22.2 1/90 20 95 53 ±4
Okuma: MB-46VA/B | MB56-VA/B
MB-46VA/B MB56-VA/BTRAVEL X-AXIS 22.05[30.00] in. (560 [762] mm) 41.34 in. (1,050 mm)
TRAVEL Y-AXIS 18.11 in. (460 mm) 22.05 in. (560 mm)
TRAVEL Z-AXIS 18.11 in. (460 mm) 18.11 in. (460 mm)
TABLE TO SPINDLE NOSE 5.91 ~ 24.02 (150 ~ 610 mm)
MAX. LOAD CAPACITY 1,100 lbs. (500 kg) 1,980 lbs. (900 kg)
FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,260 ipm (40 / 40 / 32 m/min.)
Okuma Interface # CNC 180 631-1467-9 632-1467-9
Okuma Interface # CNC 202 631-1490-9 632-1490-9
Okuma Interface # CNC 260 631-1489-9 632-1489-9
Okuma Interface # CNC 302 631-1491-9 632-1491-9
MB-
V Se
ries
CNC260/302
CNC180/202
For left hand motor style, multi-spindle units, and back mount motor style please contact us.
For Support Tailstock and ChuckAccessories, go to page 44
• Small foot print with a powerful brake.
• Hardened gear eliminates constant backlash adjustment.
• High speed (44.4RPM) available upon request.
• Large ID hole with H7 tolerance for fixture standardization.
• Highest weight load capacity in its class.
• The rotary table can be used vertically or horizontally depending on the application.
• Various options are available to meet all work holding, fixturing and chucking requirements.
Air booster available. Please contact us for more information.
Nikken Rotary Tables for Okuma 13
For more detailed information, please contact us.
Okuma: MB-46VA/B | MB56-VA/B
MB-46VA/B MB56-VA/BTRAVEL X-AXIS 22.05[30.00] in. (560 [762] mm) 41.34 in. (1,050 mm)
TRAVEL Y-AXIS 18.11 in. (460 mm) 22.05 in. (560 mm)
TRAVEL Z-AXIS 18.11 in. (460 mm) 18.11 in. (460 mm)
TABLE TO SPINDLE NOSE 5.91 ~ 24.02 (150 ~ 610 mm)
MAX. LOAD CAPACITY 1,100 lbs. (500 kg) 1,980 lbs. (900 kg)
FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,260 ipm (40 / 40 / 32 m/min.)
Okuma Interface # CNC 180 631-1467-9 632-1467-9
Okuma Interface # CNC 202 631-1490-9 632-1490-9
Okuma Interface # CNC 260 631-1489-9 632-1489-9
Okuma Interface # CNC 302 631-1491-9 632-1491-9
Tailstock/SupportTable Part #
MB-46VA/B MB56-VA/B
X-Y Axis Travel 30.00" X 18.11" (762 X 460mm) 41.34" X 22.06" (1050 X 660mm)
X-Y Table Size 39.37" X 18.11" (1000 X 460mm) 51.28" X 22.05" (1300 X 560mm)
CNC 180/202
X-Work Envelope
Fig 1 P-125S 17.05" (433mm) 28.39" (721mm)
Fig 2 PBA-135 15.71" (399mm) 27.05" (687mm)
Fig 3 n/a n/a n/a
Fig 4 TAT 170 18.58" (472mm) 29.92" (760mm)
Y-Work Envelope 10.24" (260mm) 10.24" (260mm)
CNC 260/302
X-Work Envelope
Fig 1 P-170S 13.46" (342mm) 24.80" (630mm)
Fig 2 PBA-170 15.71" (399mm) 25.16" (639mm)
Fig 3 H-170S 7.05" (174mm) 18.38" (467mm)
Fig 4 TAT250 16.42" (417mm) 27.76" (705mm)
Y-Work Envelope 12.99" (330mm) 12.99" (330mm)
MB-
V Se
ries
Figure 1 Figure 2
Figure 4Figure 3
Nikken Rotary Tables for Okuma14
GENERAL MACHINE SPECIFICATIONS
Okuma: MB-46VA/B | MB56-VA/B
MB-46VA/B MB56-VA/BTRAVEL X-AXIS 22.05[30.00] in. (560 [762] mm) 41.34 in. (1,050 mm)TRAVEL Y-AXIS 18.11 in. (460 mm) 22.05 in. (560 mm)TRAVEL Z-AXIS 18.11 in. (460 mm) 18.11 in. (460 mm)TABLE TO SPINDLE NOSE 5.91 ~ 24.02 (150 ~ 610 mm)MAX. LOAD CAPACITY 1,100 lbs. (500 kg) 1,980 lbs. (900 kg)FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,260 ipm (40 / 40 / 32 m/min.)Okuma Interface # 5AX-130 631-1468-9 632-1468-9Okuma Interface # 5AX-201 631-14F2-9 632-14F2-9
5AX-201
5AX-130
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
4”(105mm) AIR 151 223.5 0.001⁰ 22.2 11.1 1/90 1/180 30 60 219.3 53 ±4 ±6
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
7.8”(200mm) AIR 433.6 433.6 0.001⁰ 22.2 16.6 1/90 1/120 20 60 352.7 53 ±4 ±6
For Support Tailstock and ChuckAccessories, go to page 48
For multi-spindle units please contact us.
MB-
V Se
ries
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
Air-hydraulic booster not recommended. Please contact us for more information.
Nikken Rotary Tables for Okuma 15
For more detailed information, please contact us.
Okuma: MB-46VA/B | MB56-VA/B
Tailstock/SupportTable Part #
MB-46VA/B MB56-VA/B
X-Y Axis Travel 30.00" X 18.11" (762 X 460mm) 41.34" X 22.06" (1050 X 660mm)
X-Y Table Size 39.37" X 18.11" (1000 X 460mm) 51.28" X 22.05" (1300 X 560mm)
5AX-130
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 25.43" (646mm) 37.24" (946mm)
C 30.12" (765mm) 42.17" (1071mm)
5AX-201
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 23.46" (596mm) 35.28" (896mm)
C 28.15" (715mm) 40.20" (1021mm)
Figure 1
MB-
V Se
ries
Nikken Rotary Tables for Okuma16
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 44
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
12.5” (321mm) AIR/HYD. 1298 0.001⁰ 22.2 1/90 15 441 318 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
10/12” (206/30mm) AIR 433.6 0.001⁰ 16.6 1/120 20 264.5 141.6 ±4
CNC321
CNC260/302
Okuma: MB-66VA/B
MB-66VA/BTRAVEL X-AXIS 59.06 in. (1,500mm)
TRAVEL Y-AXIS 25.98 in. (660 mm)
TRAVEL Z-AXIS 25.98 in. (660 mm)
TABLE TO SPINDLE NOSE 5.91 ~ 31.89 in. (150 ~ 810 mm)
MAX. LOAD CAPACITY 3,330 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,260 ipm (40 / 40 / 32 m/min.)
Okuma Interface # CNC 260 633-1489-9
Okuma Interface # CNC 302 633-1491-9
Okuma Interface # CNC 321 633-1474-9
For left hand motor style, multi-spindle units, and back mount motor style please contact us.
MB-
V Se
ries
• The rotary table can be used vertically or horizontally depending on the application.
• 4” through-hole.
• Suitable for indexing and rotational milling on a wide variety of work pieces.
• Strong hydraulic break allows for high braking torque.
• Highest weight load capacity in its class.
• The rotary table can be used vertically or horizontally depending on the application.
• Various options are available to meet all work holding, fixturing and chucking requirements.
Air booster available. Please contact us for more information.
Nikken Rotary Tables for Okuma 17
For more detailed information, please contact us.
Okuma: MB-66VA/B
Tailstock/SupportTable Part #
MB-66VA/B
X-Y Axis Travel 59.06" X 25.98" (1500 X 660mm)
X-Y Table Size 60.24" X 25.98" (1530 X 660mm)
CNC 260/302
X-Work Envelope
Fig 1 P-170S 43.70" (1110mm)
Fig 2 PBA-170 44.06" (1119mm)
Fig 3 H-170S 37.28" (947mm)
Fig 4 TAT250 46.64" (1185mm)
Y-Work Envelope 12.99" (330mm)
CNC 321
X-Work Envelope
Fig 1 P-230S 42.13" (1070mm)
Fig 2 H-230S 42.48" (1079mm)
Fig 3 TAT320 40.94" (1040mm)
Y-Work Envelope 17.72" (450mm)
Figure 1 Figure 2
Figure 4Figure 3
MB-
V Se
ries
Nikken Rotary Tables for Okuma18
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 48
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
15.5” (401mm) AIR/HYD. 1298 0.001⁰ 22.2 1/90 15 496 318 ±4
Okuma: MB-66VA/BMB-66VA/B
TRAVEL X-AXIS 59.06 in. (1,500mm)
TRAVEL Y-AXIS 25.98 in. (660 mm)
TRAVEL Z-AXIS 25.98 in. (660 mm)
TABLE TO SPINDLE NOSE 5.91 ~ 31.89 in. (150 ~ 810 mm)
MAX. LOAD CAPACITY 3,330 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,260 ipm (40 / 40 / 32 m/min.)
Okuma Interface # CNC 401 633-1488-9
Okuma Interface # CNC B350 633-14F1-9
Okuma Interface # CNC B450 633-1418-9
CNC401
CNCB350
CNCB450
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
17.5” (450mm) AIR/HYD. 2854 0.001⁰ 25 1/120 15 727.5 424.8 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
13.78" (350mm) AIR/HYD. 2456.8 0.001⁰ 22.2 1/90 15 540 319 ±4
• 4” through-hole.
• Tubular bearings mounted directly under the edge of the faceplate absorb shock and dampen vibration.
• Ideal for heavy duty machining and large size work piece cutting.
• Large through hole and powerful brake system.
• Ideal for heavy duty machining and large size work piece cutting.• Large through hole and powerful brake system.• Dividing and lead cutting for large size work piece is suitable.• Large through hole and powerful clamping system.• Featuring 8” through-hole and powerful brake system.• Ideal for machining of large pipes.
MB-
V Se
ries
Nikken Rotary Tables for Okuma 19
For more detailed information, please contact us.
Okuma: MB-66VA/B
Tailstock/SupportTable Part #
MB-66VA/B
X-Y Axis Travel 59.06" X 25.98" (1500 X 660mm)
X-Y Table Size 60.24" X 25.98" (1530 X 660mm)
CNC 401
X-Work Envelope
Fig 1 P-230S 41.73" (1060mm)
Fig 2 H-230S 42.09" (1069mm)
Fig 3 TAT320 40.55" (1030mm)
Y-Work Envelope 17.72" (450mm)
CNC B350
X-Work Envelope
Fig 1 P-230S 40.75" (1035mm)
Fig 2 H-230S 41.10" (1044mm)
Fig 3 TAT320 39.57" (1005mm)
Y-Work Envelope 17.72" (450mm)
CNC B450
X-Work Envelope
Fig 1 P-280S 41.73" (1060mm)
Fig 2 n/a n/a
Fig 3 n/a n/a
Y-Work Envelope 21.65" (550mm)
Figure 1 Figure 2
Figure 3
MB-
V Se
ries
Nikken Rotary Tables for Okuma20
GENERAL MACHINE SPECIFICATIONS
5AX-201
Okuma: MB-66VA/B
MB-66VA/B
TRAVEL X-AXIS 59.06 in. (1,500mm)
TRAVEL Y-AXIS 25.98 in. (660 mm)
TRAVEL Z-AXIS 25.98 in. (660 mm)
TABLE TO SPINDLE NOSE 5.91 ~ 31.89 in. (150 ~ 810 mm)
MAX. LOAD CAPACITY 3,330 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,260 ipm (40 / 40 / 32 m/min.)
Okuma Interface # 5AX-201 633-14F2-9
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
7.8”(200mm) AIR 433.6 433.6 0.001⁰ 22.2 16.6 1/90 1/120 20 60 352.7 53 ±4 ±6
For Support Tailstock and ChuckAccessories, go to page 48
For multi-spindle units please contact us.
MB-
V Se
ries
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use
of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
Air-hydraulic booster not recommended. Please contact us for more information.
Nikken Rotary Tables for Okuma 21
For more detailed information, please contact us.
Okuma: MB-66VA/B
Tailstock/SupportTable Part #
MB-66VA/B
X-Y Axis Travel 59.06" X 25.98" (1500 X 660mm)
X-Y Table Size 60.24" X 25.98" (1530 X 660mm)
5AX-201
Work Envelope
A 5.91" (150mm)
B 44.33" (1126mm)
C 43.74" (1111mm)
Figure 1
MB-
V Se
ries
Nikken Rotary Tables for Okuma22
GENERAL MACHINE SPECIFICATIONS
Okuma: MB-66VA/B
5AX-250
5AX-230
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy (sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
9.8" (250mm) AIR/HYD. 433.6 361.3 0.001⁰ 22.2 11.1 1/90 1/180 20 60 639.3 106.2 ±4 ±6
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
9.1" (230mm) HYD. 361.4 2529.8 0.001⁰ 11.1 5.5 1/180 1/360 20 60 220 212.4 ±4 ±6
For Support Tailstock and ChuckAccessories, go to page 48
For multi-spindle units please contact us.
MB-66VA/B
TRAVEL X-AXIS 59.06 in. (1,500mm)
TRAVEL Y-AXIS 25.98 in. (660 mm)
TRAVEL Z-AXIS 25.98 in. (660 mm)
TABLE TO SPINDLE NOSE 5.91 ~ 31.89 in. (150 ~ 810 mm)
MAX. LOAD CAPACITY 3,330 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 1,575 / 1,575 / 1,260 ipm (40 / 40 / 32 m/min.)
Okuma Interface # 5AX-230 633-1402-9
Okuma Interface # 5AX-250 633-1476-9
MB-
V Se
ries
• CNC tilting rotary table with powerful brake system.• Eliminate multiple setups.• Significant time benefits and cost reduction through use of only one setup.• Improve parts quality and maximize productivity.• Rotary and tilting axes are controlled by CNC.• Powerful braking system.
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
Nikken Rotary Tables for Okuma 23
For more detailed information, please contact us.
Okuma: MB-66VA/B
Tailstock/SupportTable Part #
MB-66VA/B
X-Y Axis Travel 59.06" X 25.98" (1500 X 660mm)
X-Y Table Size 60.24" X 25.98" (1530 X 660mm)
5AX-230
Work Envelope
A 1.97" (50mm)
B 36.44" (925.5mm)
C 35.85" (910.5mm)
5AX-250
Work Envelope
A 5.91" (150mm)
B 45.08" (1145mm)
C 44.49" (1130mm)
Figure 1
MB-
V Se
ries
Nikken Rotary Tables for Okuma24
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 44
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
12.5” (321mm) AIR/HYD. 1298 0.001⁰ 22.2 1/90 15 441 318 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
10/12” (206/30mm) AIR 433.6 0.001⁰ 16.6 1/120 20 264.5 141.6 ±4
Okuma: MA-550VB | MA-650VBM
A-Se
ries
Vert
ical
CNC321
CNC260/302
MA-550VB MA-650VB
TRAVEL X-AXIS 900 in. (1,300 mm)*(35.43 in. (51.58 mm)) 1,100 in. (1,530 mm)*(43.30 in. (60.23 mm))
TRAVEL Y-AXIS 22.04 in. (560 mm) 25.98 in. (660 mm)
TRAVEL Z-AXIS 22.04 in. (560 mm) 24.01 in. (610 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 35.03 in. (200 ~ 760 mm) 14.96 ~ 40.94 in. (380 ~ 1,040 mm)
MAX. LOAD CAPACITY 39.37 lbs. (1,000 kg) 59.05 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 131.24 / 131.24 / 98.43 fpm (40 / 40 / 30 m/min.)
Okuma Interface # CNC 260 605-1498-9 606-1498-9
Okuma Interface # CNC 302 605-1491-9 606-1491-9
Okuma Interface # CNC 321 605-1474-9 606-1474-9
For left hand motor style, multi-spindle units, and back mount motor style please contact us.
• The rotary table can be used vertically or horizontally depending on the application.
• 4” through-hole.
• Suitable for indexing and rotational milling on a wide variety of work pieces.
• Strong hydraulic break allows for high braking torque.
• Highest weight load capacity in its class.
• The rotary table can be used vertically or horizontally depending on the application.
• Various options are available to meet all work holding, fixturing and chucking requirements.
Air booster available. Please contact us for more information.
Nikken Rotary Tables for Okuma 25
For more detailed information, please contact us.
Okuma: MA-550VB | MA-650VB
MA-
Serie
s Ve
rtica
l
Figure 1 Figure 2
Figure 4Figure 3
Tailstock/SupportTable Part #
MA-550VB MA-650VB
X-Y Axis Travel 51.18" X 22.05" (1300 X 560mm) 59.06" X 25.98" (1530 X 660mm)
X-Y Table Size 51.18" X 22.05" (1300 X 560mm) 51.18" X 22.05" (1300 X 660mm)
CNC 260/302
X-Work Envelope
Fig 1 P-170S 34.65" (880mm) 34.65" (880mm)
Fig 2 PBA-170 35.00" (889mm) 35.00" (889mm)
Fig 3 H-170S 28.23" (717mm) 28.23" (717mm)
Fig 4 TAT250 37.60" (955mm) 37.60" (955mm)
Y-Work Envelope 12.99" (330mm) 12.99" (330mm)
CNC 321
X-Work Envelope
Fig 1 P-230S 33.07" (840mm) 33.07" (840mm)
Fig 2 H-230S 33.43" (849mm) 33.43" (849mm)
Fig 3 TAT320 31.89" (810mm) 31.89" (810mm)
Y-Work Envelope 17.72" (450mm) 17.72" (450mm)
Nikken Rotary Tables for Okuma26
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 48
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
17.5" (450mm) AIR/HYD. 2854 0.001⁰ 25 1/120 15 727.5 424.8 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
15.5" (401mm) AIR/HYD. 1298 0.001⁰ 22.2 1/90 15 496 318 ±4
Okuma: MA-550VB | MA-650VB
CNC401
CNCB350
CNCB450
MA-550VB MA-650VBTRAVEL X-AXIS 900 in. (1,300 mm)*(35.43 in. (51.58 mm)) 1,100 in. (1,530 mm)*(43.30 in. (60.23 mm))
TRAVEL Y-AXIS 22.04 in. (560 mm) 25.98 in. (660 mm)
TRAVEL Z-AXIS 22.04 in. (560 mm) 24.01 in. (610 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 35.03 in. (200 ~ 760 mm) 14.96 ~ 40.94 in. (380 ~ 1,040 mm)
MAX. LOAD CAPACITY 39.37 lbs. (1,000 kg) 59.05 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 131.24 / 131.24 / 98.43 fpm (40 / 40 / 30 m/min.)
Okuma Interface # CNC 401 605-1488-9 606-1488-9
Okuma Interface # CNC B350 605-14F1-9 606-14F1-9
Okuma Interface # CNC B450 605-1418-9 606-1418-9
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
13.78" (350mm) AIR/HYD. 2456.8 0.001⁰ 22.2 1/90 15 540 319 ±4
• 4” through-hole.
• Tubular bearings mounted directly under the edge of the faceplate absorb shock and dampen vibration.
MA-
Serie
s Ve
rtica
l
• Ideal for heavy duty machining and large size work piece cutting.
• Large through hole and powerful brake system.
• Ideal for heavy duty machining and large size work piece cutting.• Large through hole and powerful brake system.• Dividing and lead cutting for large size work piece is suitable.• Large through hole and powerful clamping system.• Featuring 8” through-hole and powerful brake system.• Ideal for machining of large pipes.
Nikken Rotary Tables for Okuma 27
For more detailed information, please contact us.
Okuma: MA-550VB | MA-650VB
Figure 1 Figure 2
Figure 3
Tailstock/SupportTable Part #
MA-550VB MA-650VB
X-Y Axis Travel 51.18" X 22.05" (1300 X 560mm) 59.06" X 25.98" (1530 X 660mm)
X-Y Table Size 51.18" X 22.05" (1300 X 560mm) 51.18" X 22.05" (1300 X 660mm)
CNC 401
X-Work Envelope
Fig 1 P-230S 32.68" (830mm) 32.68" (830mm)
Fig 2 H-230S 33.03" (839mm) 33.03" (839mm)
Fig 3 TAT320 31.50" (800mm) 31.50" (800mm)
Y-Work Envelope 17.72" (450mm) 17.72" (450mm)
CNC B350
X-Work Envelope
Fig 1 P-230S 31.69" (805mm) 31.69" (805mm)
Fig 2 H-230S 32.05" (814mm) 32.05" (814mm)
Fig 3 TAT320 30.51" (775mm) 30.51" (775mm)
Y-Work Envelope 17.72 (450mm) 17.72 (450mm)
CNC B450
X-Work Envelope
Fig 1 P-280S 29.53" (750mm) 29.53" (750mm)
Fig 2 n/a n/a n/a
Fig 3 n/a n/a n/a
Y-Work Envelope 21.65" (550mm) 21.65" (550mm)
MA-
Serie
s Ve
rtica
l
Nikken Rotary Tables for Okuma28
GENERAL MACHINE SPECIFICATIONS
5AX-130
Okuma: MA-550VB | MA-650VB
MA-550VB MA-650VB
TRAVEL X-AXIS 900 in. (1,300 mm)*(35.43 in. (51.58 mm)) 1,100 in. (1,530 mm)*(43.30 in. (60.23 mm))
TRAVEL Y-AXIS 22.04 in. (560 mm) 25.98 in. (660 mm)
TRAVEL Z-AXIS 22.04 in. (560 mm) 24.01 in. (610 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 35.03 in. (200 ~ 760 mm) 14.96 ~ 40.94 in. (380 ~ 1,040 mm)
MAX. LOAD CAPACITY 39.37 lbs. (1,000 kg) 59.05 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 131.24 / 131.24 / 98.43 fpm (40 / 40 / 30 m/min.)
Okuma Interface # 5AX-130 605-1468-9 606-1468-9
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
4” (105mm) AIR 151 223.5 0.001⁰ 22.2 11.1 1/90 1/180 30 60 219.3 53 ±4 ±6
For Support Tailstock and ChuckAccessories, go to page 48
For multi-spindle units please contact us.
MA-
Serie
s Ve
rtica
l
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
Nikken Rotary Tables for Okuma 29
For more detailed information, please contact us.
Okuma: MA-550VB | MA-650VB
Tailstock/SupportTable Part #
MA-550VB MA-650VB
X-Y Axis Travel 51.18" X 22.05" (1300 X 560mm) 59.06" X 25.98" (1530 X 660mm)
X-Y Table Size 51.18" X 22.05" (1300 X 560mm) 51.18" X 22.05" (1300 X 660mm)
5AX-130
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 33.62" (854mm) 33.62" (854mm)
C 33.62" (854mm) 33.62" (854mm)
Figure 1
MA-
Serie
s Ve
rtica
l
Nikken Rotary Tables for Okuma30
GENERAL MACHINE SPECIFICATIONS
Okuma: MA-550VB | MA-650VB
5AX-201
5AX-230
5AX-250
MA-550VB (-S)* MA-650VB (-S)*TRAVEL X-AXIS 51.58 (35.43) in. 1,300 (900)* mm 60.23(43.30) in. 1,530 (1,100)* mm
TRAVEL Y-AXIS 22.04 in. (560 mm) 25.98 in. (660 mm)
TRAVEL Z-AXIS 22.04 in. (560 mm) 24.01 in. (610 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 35.03 in. (200 ~ 760 mm) 14.96 ~ 40.94 in. (380 ~ 1,040 mm)
MAX. LOAD CAPACITY 39.37 lbs. (1,000 kg) 59.05 lbs. (1,500 kg)
FEED RATE - RAPID X/Y/Z 131.24 / 131.24 / 98.43 fpm (40 / 40 / 30 m/min.)
Okuma Interface # 5AX-201 605-14F2-9 606-14F2-9
Okuma Interface # 5AX-230 605-1402-9 606-1402-9
Okuma Interface # 5AX-250 605-1476-9 606-1476-9
*Short Table Model
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min.
Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
7.8" (200mm) AIR 433.6 433.6 0.001⁰ 22.2 16.6 1/90 1/120 20 60 352.7 53 ±4 ±6
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min.
Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy (sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
9.8" (250mm) AIR/HYD. 433.6 361.3 0.001⁰ 22.2 11.1 1/90 1/180 20 60 639.3 106.2 ±4 ±6
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min.
Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
9.1" (230mm) HYD. 361.4 2529.8 0.001⁰ 11.1 5.5 1/180 1/360 20 60 220 212.4 ±4 ±6
For Support Tailstock and ChuckAccessories, go to page 48
For multi-spindle units please contact us.
MA-
Serie
s Ve
rtica
l
• Eliminate multiple setups.• Significant time benefits and cost reduction through use of only one setup.• Improve parts quality and maximize productivity.• Rotary and tilting axes are controlled by CNC.
• CNC tilting rotary table with powerful brake system.• Eliminate multiple setups.• Significant time benefits and cost reduction through use of only one setup.• Improve parts quality and maximize productivity.• Rotary and tilting axes are controlled by CNC.• Powerful braking system.
• Eliminate multiple setups.• Significant time benefits and cost reduction through use of only one setup.• Improve parts quality and maximize productivity.• Rotary and tilting axes are controlled by CNC.
Air-hydraulic booster not recommended. Please contact us for more information.
Nikken Rotary Tables for Okuma 31
For more detailed information, please contact us.
Okuma: MA-550VB | MA-650VB
Figure 1
Tailstock/SupportTable Part #
MA-550VB MA-650VB
X-Y Axis Travel 51.18" X 22.05" (1300 X 560mm) 59.06" X 25.98" (1530 X 660mm)
X-Y Table Size 51.18" X 22.05" (1300 X 560mm) 51.18" X 22.05" (1300 X 660mm)
5AX-201
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 35.39" (899mm) 35.39" (899mm)
C 35.39" (899mm) 35.39" (899mm)
5AX-230
Work Envelope
A 1.97" (50mm) 1.97" (50mm)
B 30.12" (765mm) 30.12" (765mm)
C 30.12" (765mm) 30.12" (765mm)
5AX-250
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 35.83" (910mm) 35.83" (910mm)
C 35.83" (910mm) 35.83" (910mm)
MA-
Serie
s Ve
rtica
l
Nikken Rotary Tables for Okuma32
GENERAL MACHINE SPECIFICATIONS
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
12.5”(321mm)
AIR/HYD. 1298 0.001⁰ 22.2 1/90 15 441 318 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
10/12”(206/30mm)
AIR/HYD. 433.6 0.001⁰ 16.6 1/120 20 264.5 141.6 ±4
CNC321
CNC302
Okuma: 761V | 852V M
illac
Ser
ies
761V 852VTRAVEL X-AXIS 60.69 in. (1,540 mm) 3,050 in. [2,050 mm] (120 in. [80.71 mm])
TRAVEL Y-AXIS 29.92 in. (760 mm) 33.46 in. (850 mm)
TRAVEL Z-AXIS 25.98 in. (660 mm) 29.53 in. (750 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 33.85 in. (200 ~ 860 mm) 7.87 ~ 37.4 [6.3 ~ 35.8] in. 200 ~ 950 [160 ~ 910] mm
MAX. LOAD CAPACITY 4,400 lbs. (2,000 kg) 3,800 lbs. (2,500 kg)
FEED RATE - RAPID X/Y/Z 52.49 / 52.49 / 52.49 fpm (16 / 16 / 16 m/min.) 39.37 / 39.37 / 52.49 fpm (12 / 12 / 16 m/min.)
Okuma Interface # CNC 302 2X5-1491-9 -Okuma Interface # CNC 321 2X5-1474-9 2X6-1474-9
For Support Tailstock and ChuckAccessories, go to page 44
For left hand motor style, multi-spindle units, and back mount motor style please contact us.
• Highest weight load capacity in its class.
• The rotary table can be used vertically or horizontally depending on the application.
• The rotary table can be used vertically or horizontally depending on the application.
• 4” through-hole.
• Suitable for indexing and rotational milling on a wide variety of work pieces.
• Strong hydraulic break allows for high braking torque.
Nikken Rotary Tables for Okuma 33
For more detailed information, please contact us.
Okuma:761V | 852V
Mill
ac S
erie
s
Tailstock/SupportTable Part #
761V 852V
X-Y Axis Travel 60.63" X 22.05" (1540 X 760mm) 80.71" X 33.46" (2050 X 850mm)
X-Y Table Size 70.87" X 22.05" (1800 X 720mm) 86.61" X 33.46" (2200 X 850mm)
CNC 302
X-Work Envelope
Fig 1 P-170S 54.33" (1380mm) 70.08" (1780mm)
Fig 2 PBA-170 54.69" (1389mm) 70.43" (1789mm)
Fig 3 H-170S 47.9" (1217mm) 63.66" (1617mm)
Fig 4 TAT250 57.28" (1455mm) 73.03" (1855mm)
Y-Work Envelope 12.99" (330mm) 12.99" (330mm)
CNC 321
X-Work Envelope
Fig 1 P-230S 52.76" (1340mm) 68.50" (1740mm)
Fig 2 H-230S 53.11" (1349mm) 68.86" (1749mm)
Fig 3 TAT320 51.57" (1310mm) 67.32" (1710mm)
Y-Work Envelope 17.72" (450mm) 17.72" (450mm)
Figure 1 Figure 2
Figure 4Figure 3
Nikken Rotary Tables for Okuma34
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 44
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
13.78" (350mm) AIR/HYD. 2456.8 0.001⁰ 22.2 1/90 15 540 319 ±4
CNCB350
Okuma: 761V | 852V
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
17.5” (450mm) AIR/HYD. 2854 0.001⁰ 25 1/120 15 727.5 424.8 ±4
CNCB450
761V 852VTRAVEL X-AXIS 60.69 in. (1,540 mm) 3,050 in. [2,050 mm] (120 in. [80.71 mm])
TRAVEL Y-AXIS 29.92 in. (760 mm) 33.46 in. (850 mm)
TRAVEL Z-AXIS 25.98 in. (660 mm) 29.53 in. (750 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 33.85 in. (200 ~ 860 mm) 7.87 ~ 37.4 [6.3 ~ 35.8] in. 200 ~ 950 [160 ~ 910] mm
MAX. LOAD CAPACITY 4,400 lbs. (2,000 kg) 3,800 lbs. (2,500 kg)
FEED RATE - RAPID X/Y/Z 52.49 / 52.49 / 52.49 fpm (16 / 16 / 16 m/min.) 39.37 / 39.37 / 52.49 fpm (12 / 12 / 16 m/min.)
Okuma Interface # CNC B350 2X5-14F1-9 -Okuma Interface # CNC B450 2X5-1418-9 2X6-1418-9
Mill
ac S
erie
s • Ideal for heavy duty machining and large size work piece cutting.
• Large through hole and powerful brake system.
• Ideal for heavy duty machining and large size work piece cutting.
• Large through hole and powerful brake system.
• Dividing and lead cutting for large size work piece is suitable.
• Large through hole and powerful clamping system.
• Featuring 8” through-hole and powerful brake system.
• Ideal for machining of large pipes.
Nikken Rotary Tables for Okuma 35
For more detailed information, please contact us.
Okuma:761V | 852V
Tailstock/SupportTable Part #
761V 852V
X-Y Axis Travel 60.63" X 22.05" (1540 X 760mm) 80.71" X 33.46" (2050 X 850mm)
X-Y Table Size 70.87" X 22.05" (1800 X 720mm) 86.61" X 33.46" (2200 X 850mm)
CNC B350
X-Work Envelope
Fig 1 P-230S 51.38" (1305mm) 67.13" (1705mm)
Fig 2 H-230S 51.73" (1314mm) 67.48" (1714mm)
Fig 3 TAT320 50.20" (1275mm) 65.94" (1675mm)
Y-Work Envelope 17.72" (450mm) 17.72" (450mm)
CNC B450
X-Work Envelope
Fig 1 P-280S 49.21" (1250mm) 64.96" (1650mm)
Fig 2 n/a n/a n/a
Fig 3 n/a n/a n/a
Y-Work Envelope 21.65" (550mm) 21.65" (550mm)
Figure 1 Figure 2
Figure 3
Mill
ac S
erie
s
Nikken Rotary Tables for Okuma36
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 44
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
23.5” (601mm) AIR/HYD. 3433 0.001⁰ 11.1 1/180 15 1036.2 673.2 ±4
CNC601
Okuma: 761V | 852V | 1052VII
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
15.5” (401mm) AIR/HYD. 1298 0.001⁰ 22.2 1/90 15 496 318 ±4
CNC401
761V 852V 1052VIITRAVEL X-AXIS 60.69 in. (1,540 mm) 3,050 in. [2,050 mm] (120 in. [80.71 mm])
TRAVEL Y-AXIS 29.92 in. (760 mm) 33.46 in. (850 mm) 41.73 in. (1,060 mm)
TRAVEL Z-AXIS 25.98 in. (660 mm) 29.53 in. (750 mm) 31.5 in. (800 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 33.85 in. (200 ~ 860 mm) 7.87 ~ 37.4 [6.3 ~ 35.8] in. 200 ~ 950 [160 ~ 910] mm
7.87 ~ 39.37 [6.29 ~ 37.8] in. 200 ~ 1,000 [160 ~ 960] mm
MAX. LOAD CAPACITY 4,400 lbs. (2,000 kg) 3,800 lbs. (2,500 kg) 11,000 lbs. (5,000 kg)
FEED RATE - RAPID X/Y/Z 52.49 / 52.49 / 52.49 fpm (16 / 16 / 16 m/min.) 39.37 / 39.37 / 52.49 fpm (12 / 12 / 16 m/min.)
Okuma Interface # CNC 401 2X5-1488-9 2X6-1488-9 2X7-1488-9
Okuma Interface # CNC 601 2X5-14C9-9 2X6-14C9-9 2X7-14C9-9
• Ideal for heavy duty machining and large size work piece cutting.
• Large through hole and powerful brake system.
• 4” through-hole.
• Ideal for heavy duty machining and large size work piece cutting.
• Large through hole and powerful brake system.
Mill
ac S
erie
s
Nikken Rotary Tables for Okuma 37
For more detailed information, please contact us.
Okuma:761V | 852V | 1052VII
Tailstock/SupportTable Part #
761V 852V 1052VII
X-Y Axis Travel 60.63" X 22.05" (1540 X 760mm) 80.71" X 33.46" (2050 X 850mm) 80.71" X 33.46" (2050 X 1060mm)
X-Y Table Size 70.87" X 22.05" (1800 X 720mm) 86.61" X 33.46" (2200 X 850mm) 86.61" X 33.46" (2200 X 1050mm)
CNC 401
X-Work Envelope
Fig 1 P-230S 52.36" (1330mm) 68.11" (1730mm) 68.11" (1730mm)
Fig 2 H-230S 52.72" (1339mm) 68.46" (1739mm) 68.46" (1739mm)
Fig 3 TAT320 51.18" (1300mm) 66.93" (1700mm) 66.93" (1700mm)
Y-Work Envelope 17.72" (450mm) 17.72" (450mm) 17.72 (450mm)
CNC 601
X-Work Envelope
Fig 1 P-310S n/a n/a 65.35" (1660mm)
Fig 2 n/a n/a n/a n/a
Fig 3 TAT500 n/a n/a 65.35" (1660mm)
Y-Work Envelope n/a n/a 24.02" (610mm)
Figure 1 Figure 2
Figure 3
Mill
ac S
erie
s
Nikken Rotary Tables for Okuma38
GENERAL MACHINE SPECIFICATIONS
5AX-350
5AX-250
Okuma: 852V | 1052VII
852V 1052VIITRAVEL X-AXIS 3,050 in. [2,050 mm] (120 in. [80.71 mm])TRAVEL Y-AXIS 33.46 in. (850 mm) 41.73 in. (1,060 mm) TRAVEL Z-AXIS 29.53 in. (750 mm) 31.5 in. (800 mm)
TABLE TO SPINDLE NOSE 7.87 ~ 37.4 [6.3 ~ 35.8] in. 200 ~ 950 [160 ~ 910] mm
7.87 ~ 39.37 [6.29 ~ 37.8] in. 200 ~ 1,000 [160 ~ 960] mm
MAX. LOAD CAPACITY 3,800 lbs. (2,500 kg) 11,000 lbs. (5,000 kg)FEED RATE - RAPID X/Y/Z 39.37 / 39.37 / 52.49 fpm (12 / 12 / 16 m/min.)Okuma Interface # 5AX-250 2X6-1476-9 -Okuma Interface # 5AX-350 2X6-1485-9 2X7-1485-9
Faceplate Diam-eter
Brake System
Brake Torque ft. lbs Min. Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
21.6” (550mm) HYD. 1156.3 1156.3 0.001⁰ 22.2 22.2 1/90 1/90 20 60 926 212.4 ±4 ±6
Faceplate Diameter
Brake System
Brake Torque ft. lbs Min.
Increment
Rotation Speed(min-1)
Total Reduction Ratio
Indexing Accuracy(sec.) Net Weight
(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting Rotary Tilting
9.8” (250mm) AIR/HYD. 433.6 361.3 0.001⁰ 22.2 11.1 1/90 1/180 20 60 639.3 106.2 ±4 ±6
For Support Tailstock and ChuckAccessories, go to page 48
For multi-spindle units please contact us.
Mill
ac S
erie
s
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
• Eliminate multiple setups.
• Significant time benefits and cost reduction through use of only one setup.
• Improve parts quality and maximize productivity.
• Rotary and tilting axes are controlled by CNC.
• Powerful braking system.
Nikken Rotary Tables for Okuma 39
For more detailed information, please contact us.
Okuma: 852V | 1052VII
Tailstock/SupportTable Part #
852V 1052VII
X-Y Axis Travel 80.71" X 33.46" (2050 X 850mm) 80.71" X 33.46" (2050 X 1060mm)
X-Y Table Size 86.61" X 33.46" (2200 X 850mm) 86.61" X 33.46" (2200 X 1050mm)
5AX-250
Work Envelope
A 5.91" (150mm) n/a
B 69.88" (1775mm) n/a
C 66.93" (1700mm) n/a
5AX-350
Work Envelope
A 5.91" (150mm) 5.91" (150mm)
B 68.31" (1735mm) 68.31" (1735mm)
C 65.35" (1660mm) 65.35" (1660mm)
Figure 1
Mill
ac S
erie
s
Nikken Rotary Tables for Okuma40
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 48
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
New Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
12.5” (321mm) HYD. 1298 0.001⁰ 22.2 1/120 15 485 424.8 ±4
Okuma: MA-500HA/B | MA-600HA/B | MA-800HBM
A-Se
ries H
orizo
ntal
MA-500HA/B MA-600HA/B MA-800HBTRAVEL X-AXIS 27.56 in. (700 mm) 39.37 in. (1,000 mm) 55.12 in. (1,400 mm)
TRAVEL Y-AXIS 35.43 in. (900 mm) 49.21 in. (1,250 mm)
TRAVEL Z-AXIS 30.71 in. (780 mm) 39.37 in. (1,000 mm) 49.21 in. (1,250 mm)
MAX. LOAD CAPACITY 1,760 lbs. (798 kg) 2,640 lbs. (1,197 kg) 4,400 lbs. (2,000 kg)
FEED RATE - RAPID X/Y/Z 2,362 in./min (60,000 mm/min) 1,969 in./min (50,000 mm/min)
Okuma Interface # CNC 321T 615-14F3-9 - -Okuma Interface # CNC 401T 615-14F4-9 616-14F4-9 -Okuma Interface # CNC 601T - 616-14F5-9 617-14F5-9
CNC321T
CNC401T
CNC601T
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
New Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
23.5” (601mm) AIR/HYD. 3433 0.001⁰ 11.1 1/180 15 1157 673.2 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
New Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
15.5” (401mm) AIR/HYD. 1298 0.001⁰ 22.2 1/120 15 540 318 ±4
• Swing box application installed on the pallet of the horizontal M/C.
• To avoid interference, the drive motor is mounted on the top side of the table for horizontal machines andd
special purpose applications.
• Swing box application installed on the pallet of the horizontal M/C.
• To avoid interference, the drive motor is mounted on the top side of the table for horizontal machines and
special purpose applications.
• Swing box application installed on the pallet of the horizontal M/C.
• To avoid interference, the drive motor is mounted on the top side of the table for horizontal machines and
special purpose applications.
Nikken Rotary Tables for Okuma 41
For more detailed information, please contact us.
Okuma: MA-500HA/B | MA-600HA/B | MA-800HB
MA-
Serie
s Hor
izont
al
MA-500HA/B MA-600HA/B MA-800HB
XYZ Axis Travel27.56" X 35.43" X 30.71" (700 X 900 X 780mm)
39.37" X 35.43" X 39.37" (1000 X 900 X 1000mm)
55.12" X 49.21" X 49.21" (1400 X 1250 X 1250mm)
Pallet Size39.37" X 18.11" (500 X 500mm)
24.80" X 24.80" (630 X 630mm)
24.80" X 24.80" (630 X 630mm)
CNC 321T
Face Plate Size 12.60" (320mm) n/a n/a
Max Workpiece Length
15.75" (400mm) n/a n/a
Work Envelope(Swing)
31.50" (800mm) n/a n/a
CNC 401T
Face Plate Size 15.75" (400mm) 15.75" (400mm) n/a
Max Workpiece Length
15.75" (400mm) 19.69" (500mm) n/a
Work Envelope(Swing)
31.50" (800mm) 39.37" (1000mm) n/a
CNC 601T
Face Plate Size n/a 23.62" (600mm) 23.62" (600mm)
Max Workpiece Length
n/a 19.69" (500mm) 27.56" (700mm)
Work Envelope(Swing)
n/a 39.37" (1000mm) 55.12" (1400mm)
Front View Top View
Nikken Rotary Tables for Okuma42
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 48
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
10/12” (206/30mm) AIR 433.6 0.001⁰ 16.6 1/120 20 353 141.6 ±4
Faceplate Diameter Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability(Arc sec.)
12.5” (321mm) HYD. 1298 0.001⁰ 22.2 1/120 15 485 424.8 ±4
Okuma: MB-4000H | MB-5000HM
B-Se
ries H
orizo
ntal
CNC321T
CNC260T
MB-4000H MB-5000HTRAVEL X-AXIS 22.05 in. (560 mm) 29.92 in. (760 mm)
TRAVEL Y-AXIS 22.05 in. (560 mm) 29.92 in. (760 mm)
TRAVEL Z-AXIS 24.61 in. (625 mm) 29.92 in. (760 mm)
MAX. LOAD CAPACITY 880 lbs. (400 kg) 1,100 lbs. (500 kg)
FEED RATE - RAPID X/Y/Z 2,362 in./min (60,000 mm/min)
Okuma Interface # CNC 260T 644-1471-9 -Okuma Interface # CNC 321T - 645-14F3-9
• Swing box application installed on the pallet of the horizontal M/C.
• To avoid interference, the drive motor is mounted on the top side of the table for horizontal machines and
special purpose applications.
• Swing box application installed on the pallet of the horizontal M/C.
• To avoid interference, the drive motor is mounted on the top side of the table for horizontal machines and
special purpose applications.
Nikken Rotary Tables for Okuma 43
For more detailed information, please contact us.
Okuma: MB-4000H | MB-5000H
MB-
Serie
s Hor
izont
al
MB-4000H MB-5000H
XYZ Axis Travel22.05” X 22.05” X 24.61” (560 X 560 X 625mm)
29.92” X 29.92” X 29.92” (760 X 760 X 760mm)
Pallet Size15.75" X 15.75” (400 X 400mm)
19.69” X 19.69” (500 X 500mm)
CNC 260 T
Face Plate Size 10.24" (260mm) n/a
Max Workpiece Length
11.81" (300mm) n/a
Work Envelope(Swing)
23.62" (600mm) n/a
CNC 321T
Face Plate Size n/a 12.60" (320mm)
Max Workpiece Length
n/a 15.75" (400mm)
Work Envelope(Swing)
n/a 31.50" (800mm)
Front View Top View
Nikken Rotary Tables for Okuma44
GENERAL MACHINE SPECIFICATIONS
For Support Tailstock and ChuckAccessories, go to page 48
Faceplate Diameter
Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
23.5” (601mm) HYD. 3433 0.001⁰ 11.1 1/180 15 1157 673.2 ±4
Faceplate Diameter
Brake System
Brake Torqueft. lbs
Min. Increment
Rotation Speed RPM
Total Reduction
Ratio
Indexing Accuracy
(sec.)
Net Weight(lbs)
Driving Torque ft. lbs
Repeatability (Arc sec.)
15.5” (401mm) AIR/HYD. 1298 0.001⁰ 22.2 1/90 15 540 318 ±4
Okuma: MB-4000H | MB-5000H | MB-8000H
CNC601T
CNC401T
MB-4000H MB-5000H MB-8000HTRAVEL X-AXIS 22.05 in. (560 mm) 29.92 in. (760 mm) 51.18 in. (1,300 mm)
TRAVEL Y-AXIS 22.05 in. (560 mm) 29.92 in. (760 mm) 43.31 in. (1,000 mm)
TRAVEL Z-AXIS 24.61 in. (625 mm) 29.92 in. (760 mm) 49.21 in. (1,250 mm)
MAX. LOAD CAPACITY 880 lbs. (400 kg) 1,100 lbs. (500 kg) 4,400 lbs. (2,000 kg)
FEED RATE - RAPID X/Y/Z 2,362 in./min (60,000 mm/min) 1,969 in./min (50,000 mm/min)
Okuma Interface # CNC 401T - 645-14F4-9 -Okuma Interface # CNC 601T - - 647-14F5-9
MB-
Serie
s Hor
izont
al
• Swing box application installed on the pallet of the horizontal M/C.
• To avoid interference, the drive motor is mounted on the top side of the table for horizontal machines and
special purpose applications.
• Swing box application installed on the pallet of the horizontal M/C.
• To avoid interference, the drive motor is mounted on the top side of the table for horizontal machines and
special purpose applications.
Nikken Rotary Tables for Okuma 45
For more detailed information, please contact us.
Okuma: MB-4000H | MB-5000H | MB-8000H
MB-4000H MB-5000H MB-8000H
XYZ Axis Travel22.05” X 22.05” X 24.61” (560 X 560 X 625mm)
29.92” X 29.92” X 29.92” (760 X 760 X 760mm)
51.18” X 43.31” X 49.21” (1300 X 1100 X 1250mm)
Pallet Size15.75 X 15.75” (400 X 400mm)
19.69” X 19.69” (500 X 500mm)
31.50” X 31.50” (800 X 800mm)
CNC 401T
Face Plate Size n/a 15.75" (400mm) n/a
Max Workpiece Length
n/a 15.75" (400mm) n/a
Work Envelope(Swing)
n/a 31.50" (800mm) n/a
CNC 601T
Face Plate Size n/a n/a 23.62" (600mm)
Max Workpiece Length
n/a n/a 25.59" (650mm)
Work Envelope(Swing)
n/a n/a 51.18" (1300mm)
Front View Top View
MB-
Serie
s Hor
izont
al
Nikken Rotary Tables for Okuma46
Standard Multi-Spindle Units
Multi-Spindle Tilting Rotary Tables
Stan
dard
Mul
ti-Sp
indl
e Uni
ts
CNC260-2W CNC202-2W CNC100-2W CNC100-4W
For Multi-Spindle Tilting Rotary Table, please contact us with the required faceplate diameters, fixture attachment (e.g. Power Chuck ect), the required spindle pitch, the M/C model and the type of NC.
Nikken Rotary Tables for Okuma 47
CNC202L
Left Hand Motor Style
Back Mount Motor Style
CNC321BCNC202B
Motor Style Options
Mot
or St
yle O
ptio
ns
Nikken Rotary Tables for Okuma48
G
E
DC
15 stroke
H
F
B A
12
G
H
100 stroke
ø28 20
30*231 302 85 85
H1
Tailstock & Support Tables AccessoriesTa
ilsto
ck &
Supp
ort
G
HH1
166 45 138
90
ø25
45
60 stroke
164
2853586
48
AIR/HYD. Tailstock
Code No. Center Height H H1 G
Thrust (N) Weight (kg)Air 0.5 MPa Hyd. 2MPa
PBA-105 105 25 14 1176 4733 15PBA-135 135 55 14 1176 4733 20PBA-150 150 70 18 1176 4733 22PBA-170 170 90 18 1176 4733 24.5PBA-180 180 100 18 1176 4733 25.5
Hydraulic Tailstock
Code No. Center Height H H1 G
Thrust (N) Weight (kg)Hyd. 3.5MPa
H-150S 145~160 191 18 5370 28H-170S 160~180 211 18 5370 35H-230S 220~240 211 18 5370 45
Support Table TAT
Code No. A B C D E Clamping system
Brake Torque(N•m)
Weight(kg)
TAT250 250 170 295 250 145 AIR/HYD. 112/784 50
TAT320 400 230 390 320 250 Hyd. 1470 120
TAT400 400 230 430 400 250 Hyd. 1470 140
Manual Tailstock
Code No. Center Height H A B C D E F G Weight
(kg)
P-105S 102~110 27 150 76 74 120 195 14 10P-125S 125~135 27 150 76 74 120 210 14 11.5P-150S 145~160 25 195 98 102 145 210 18 22P-170S 160~180 25 195 98 102 145 210 18 22.5P-230S 220~240 25 195 98 102 145 250 18 27
A
CB
D
ETAT105 TAT250 TAT400
Small Size Support Table TAT (JAPAN. PAT)
Code No. A B C D E Clamping system
Brake Torque(N•m)
Weight(kg)
TAT105 155 105 175 105 113 Air 205 16TAT170 155 135 220 170 138 Air 205 25
Support Tables
Model Hand Op.Tailstock
Manual Tailstock
AIR/HYD. Tailstock
Hyd.Tailstock
Support Table
Scroll Chuck
CNC180, 202 MT-135 P-125S PBA-135 - TAT170 180 = R-6
202 = R-7
CNC260, 302 MT-170 P-170S PBA-170 H-170S TAT250 R-9
CNC321, 401 MT-230 P-230S - H-230S TAT320,
400 R-12
CNC601 - P-310S - - TAT500 R-12
CNCB350 MT-280 P-230S - H-230S TAT320 -CNCB450 - P-280S - - - -5AX-130 - P-150S PBA-150 H-150S - R - 4
5AX-201, 200II - P-170S PBA-180 H-170S - R - 7
5AX-230 - - - - - R - 9
5AX-350 - - - - - R -12
Nikken Rotary Tables for Okuma 49
Nikk
en Co
ntro
ller
49
Nikken Controller Specifications
Nikken Rotary Tables for Okuma50
Ø1.57
2.950.83 2.17
Ø1.59
Ø2.36
(H7)
DETAIL OF CENTER BORE
5.98
0.79
5.79
Ø7.87
5.98
3.58
3.583.54
10.04
10.04
4.17
8.40 9.4
9
13.624.1717.80
5.31
4.17
9.49
Ø1.57
2.95 2.17
Ø1.59
(H7)
Ø2.36
DETAIL OF CENTER BORE
5.98
3.58
9.49
5.31
4.17
10.044.17
8.40 9.49
3.58 10.043.5413.624.17
17.80
Ø7.09
0.79
5.795.98
Ø3.15
(H7)
7.87
0.352.36
DETAIL OF CENTER BORE
ø3.19
ø4.13
7.68
Ø10.24
6.69
6.30
12.06
0.31
12.99
14.37
5.71
6.18
5.7111.42 8.660.47
20.55
Rotary Table DimensionsRo
tary
Tabl
e Dim
ensio
ns
CNC180
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
CNC202
CNC260
Nikken Rotary Tables for Okuma 51
Ø12.60
1.181.575.51
9.25 13.98
15.83
0.51
16.34
7.28 6.69
9.45
27.9520.67
17.13
8.46
7.48
9.06
8.07
Ø4.17
2.365.12 0.471.509.45
Ø6.30
Ø10.24
Ø5.12
DETAIL OF CENTER BORE
6.69
6.30
7.68
Ø11.81
5.715.7111.420.47
12.99
8.6620.55
14.376.18
7.87
12.09
0.59
0.31
Ø3.15
(H7)
2.36 0.35
7.87
DETAIL OF CENTER BORE
ø4.13
ø3.19
Rotary Table Dimensions
Rota
ry Ta
ble D
imen
sions
CNC302
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
CNC321
Nikken Rotary Tables for Okuma52
Rotary Table DimensionsRo
tary
Tabl
e Dim
ensio
ns
10.24 10.24
22.83
Ø23.62
24.0210.24
12.20
10.63
35.83
0.5910.83
22.44
0.39
1.89
1.57 1.97
7.56 0.47
Ø5.20
Ø6.30
Ø5.12(H7)
1.50
CNC601
2.36
Ø4.13
(H7)
5.519.84
Ø4.17
Ø6.30
Ø10.24
Ø5.12
13.987.28 6.69
8.46
9.06
27.95
17.13
7.48
8.07
4.334.92Ø15.75
9.25 0.51
1.18
2.76
18.58
DETAIL OF CENTER BORE
( 21: 17.6)
CNC401
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
Nikken Rotary Tables for Okuma 53
Rotary Table Dimensions
Rota
ry Ta
ble D
imen
sions
Ø8.15
11.81Ø8.07
(H7)
8.868.86
11.81
11.42
20.47
9.45
11.02
0.71(H7)
20.0811.22
28.94
18.31
0.20
10.041.18
Ø17.72
DETAIL OF CENTER BORE
9.06
1.570.98
6.794.72 5.71
8.27
17.32
1.18
1.189.06
Ø13.7
81.1
8
7.4810.43 0.39
1.7710.83
14.96
9.45
0.20
2.17
8.467.48
19.0926.57
Ø7.09
Ø6.10
Ø6.06
Ø7.48
0.04
Ø6.06
(H7)
DETAIL OF CENTER BORE
4.33
CNCB350
CNCB450
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
Nikken Rotary Tables for Okuma54
5.519.84
Ø4.17
2.360.47
Ø10.24
Ø6.30
Ø4.13
(H7)
Ø5.12
8.467.8716.34
Ø15.75
10.638.46
1.38
3.46
7.95
26.26
25
13.3112.608.707.28
8.86
9.45
1.26
DETAIL OF CENTER BORE
16.34 10.638.46 0.98
Ø12.60
7.95
26.26 3.46
8.467.87
8.707.28 12.6012.91
12.80
8.86
9.45
251.26
1.381.18
Ø4.17
2.36 5.120.479.45
Ø10.24
Ø6.30
1.50
Ø5.12
Ø4.13
(H7)
DETAIL OF CENTER BORE
CNC321T
CNC401T
Rotary Table DimensionsRo
tary
Tabl
e Dim
ensio
ns
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
Nikken Rotary Tables for Okuma 55
2.917.87
2.362.24
6.54
11.225.71 5.51
19.94
9.25
6.69
12.83
13.98
4.72
5.96
6.1012.64
Ø3.15
(H7)
Ø3.19
0.71
DETAIL OF CENTER BORE
ø3.19
ø4.13
9.06
14.5310.243.06
5.96
13.98
Ø10.2
4
6.69
1.24
7.561.50 0.47
Ø6.30
Ø5.20
11.42
31.69
2.44
Ø23.62
1.5017.56
19.09
9.72
12.20
12.20
34.13
10.2311.6121.85
12.8013.39
3.86 12.202.76
Ø5.12
(H7)
1.89
0.20
0.59
DETAIL OF CENTER BORE
CNC601T
CNC260T
Rotary Table Dimensions
Rota
ry Ta
ble D
imen
sions
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
Nikken Rotary Tables for Okuma56
Rotary Table 5-AX DimensionsRo
tary
Tab
le 5-
AX
Ø1.30
5.51
Ø2.36
(H7) Ø1.42
Ø1.18
Ø1.97
9.728.43 6.69
5.918.66
7.4814.17
13.78
4.01 4.018.03 9.76
7.09
10.32
9.45
Ø4.13
4.92
7.32
4.92
9.52
18.70
4.13°2.76 3.154.37 9.76
9.53
5.12
9.61
10.32
17.40
6.81
13.78
4.02
9.76
4.13
6.77
DETAIL OF CENTER BORE(S=1/2)
2.363.54
5AX-130
5AX-201
Ø7.87
10.63
3.15
7.0910.24
16.738.82
6.00 4.33 3.39
11.65
4.57
5.71
104.84 5.16
3.54
3.15
4.13°
13.78
9.06
0.150.731.34
0.46
9.49
0.39
0.40
0.47
5.08
4.76
7.95 5.83
4.73
3.09
6.38 11.34
5.87
6.06
4.725.12
9.84
14.41
4.57
14.0824.41
19.49
DETAIL OF CENTER BORE(S=1/5)
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
Nikken Rotary Tables for Okuma 57
Rotary Table 5-AX Dimensions
Rota
ry Ta
ble 5
-AX
10.41
18.84(90°)
15.98(90°)
11.22
9.45(90°)
21.9412.69 9.2510.32
8.07
4.13
6.699.068.9818.50
5.7914.537.64
6.50 8.073.5418.11
Ø9.06
29.06
10.55
10.12
6.69
11.02
17.89
8.05
3.503.98
10..41
7.48
9.843.35
7.09
6.34
7.56
Ø2.36
(H7)
Ø1.57
2.17 6.020.35
Ø3.21
DETAIL OF CENTER BORE(S=1/3)
5AX-230
5AX-250
14.57
6.89
15.16 11.6126.77 9.84
Ø9.84
14.37
12.76
7.834.02
4.53
9.96 5.678.278.94
8.464.924.929.9217.20 15.94
33.152.91
22.56
3.06
17.62
6.57
15.75
6.89
1.972.05
2.05
3 21
321
XB-M
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
Nikken Rotary Tables for Okuma58
Ø13.78
7.87 7.87 4.727.8722.83
17.52
32.28 4.7214.17 18.11
6.8943.90
8.07
12.87
21.06
8.07
3.94
6.89
15.75
12.99
3.94
12.4810.35
5.71
0.47
16.14
8.469.06
5.71
5.12
5.7111.4210.43
21.8516.14
12.40
17.52
11.816.6
9
5AX-350
Rotary Table 5-AX DimensionsRo
tary
Tab
le 5-
AX
Please contact Lyndex-Nikken to confirm Okuma / Nikken Rotary Table working envelope. Drawings are subject to change.
At Lyndex-Nikken, we have made it our mission to provide the two things our customers need most: advanced technology and the innovation to keep it moving forward.
With a history rich in innovation and a focus on the technology of the future, Lyndex-Nikken has become the leader in manufacturing innovation. Our industry-leading design and capabilities give us the power to create ground-breaking tools and machine tool accessories that will perform with amazing precision and reliability.
All of our products are made in Japan, ensuring an extremely high level of quality and long-term resistance. We are continually striving to improve our technology through constant innovation to enhance the respect and reliability that our products have thus far earned within their respective industries.
Not only are we committed to providing the highest quality of equipment, but also the highest quality of service and customer care. Our team of highly experienced technicians and product specialists offers unmatched customer service and engineering support to our customers worldwide.
As an international company with offices conveniently located throughout Europe, Asia, and the United States, Lyndex-Nikken is there to serve you, no matter where you are.
Our Mission: Advanced Technology and Leading Innovation
www.lyndexnikken.com1468 Armour Boulevard
Mundelein, IL 60060E-mail: [email protected]
Phone: (847) 367-4800Fax: (847) 367-4815
CAT2014-OKUMA-RT