Next generation of surface drainage ParkDrain_Mini ParkDrain.pdf · 2017. 12. 6. · 303 - 4...

Next generation of surface drainage

ACO ParkDrain®

UniclassL7315 + L2123

EPICJ3413

CI/SfB

(52.5)

Optimum solutionACO ParkDrain® is a one piece polymer concretedrainage system which has been designed as theoptimum solution for a wide range of surfacedrainage applications requiring Load Class C 250installations.

Lower costsIt has been specifically designed to reduceinstallation time and provide inexpensivemaintenance over its whole life.

It offers cost advantages for architects, engineers,contractors and clients.

Open-minded innovationACO ParkDrain® is the result of over 30 years’development of innovative surface drainagesolutions for highways, local authority, retail,commercial and domestic users.

Standards complianceACO ParkDrain® has been certificated to Load ClassC 250 (BS EN 1433:2002) and BS EN 124:1994 forgully and access units.

Contact ACO Technical Department for standardsdetails and copies of Load Test certificates.

Benefits for specifiers� One piece design means no separate grating

specifications

� Colour choice to match location - black(asphalt) as standard, other colours availableto order e.g. white and yellow (lines andmarkings), buff/beige (standard paving), red (brick paviours) etc.

� Simplified level and stepped system for quickscheme design

Benefits for contractors � Simple scheme layouts with level invert units

� Easy to achieve excellent watertightness (to BS EN 1433:2002) with sealing groove

� Light weight (typically 16 - 20 kg/unit) foreasy one man lift enables compliance withHealth and Safety guidelines

Benefits for clients � Integral unit without separate grating style

top eliminates lost or damaged gratings

� Unobtrusive, self-coloured grating maintainsappearance and colour with time

� Rodding access units and sumps with separatelocking resin composite grating, allows easymaintenance

� Resin concrete unaffected by frost

� No removable gratings makes system suitablefor schools and play grounds

2

ACO ParkDrain®

THE NEXT GENERATION OF SURFACE DRAINAGELoad Class (BS EN 1433:2002)

Introducing ACO Mini ParkDrain®:ACO Mini ParkDrain® is a one piece polymerconcrete drainage system suitable for applicationswith restricted installation depths. The system issuitable for a wide range of drainage applicationsrequiring Load Class D 400 installations.

This system is not designed for highway use whereit can be trafficked by fast moving vehicles.

Lower installation costsACO Mini ParkDrain® is lightweight and available in1 metre length, aiding fast and simple installations.

Standards complianceACO Mini ParkDrain® has been certificated and CE marked to Load Class D 400 BS EN 1433:2002.

Free technical support To support architects, engineers and contractors in designing and installing ACO ParkDrain® andACO Mini ParkDrain® schemes, ACO’s DesignServices Team offers computer-aided schemedesign, hydraulic performance calculations andinstallation advice services.

Telephone Hotline:

01462 816666 Fax Hotline:

01462 851081 e-mail:

[email protected]:

www.aco.co.uk

Benefits for specifiers� Shallow system suitable for minimal depth

installations

� One piece design means no separate gratingspecifications

� Suitable for applications requiring D400installations*

* Not for highway use.

Benefits for contractors� Lightweight design

� 1 metre unit for fast & simple installations

� Easy to achieve excellent water tightness withsealing groove

Benefits for clients� Integral drainage solution

� Minimal disruption during installation

� No removable grating makes system suitablefor schools and playgrounds.

3

ACO Mini ParkDrain®

FOR RESTRICTED DEPTH INSTALLATIONSLoad Class (BS EN 1433:2002)

NEW

4

ACO ParkDrain®

CHANNEL DRAINAGE

Resin concrete� Minimal lifetime maintenance

� 3 - 4 compressive strength of OPC (Ordinary Portland Cement), so products can be made lighter

� Water absorption < 0.01% by weight*

* BBA report No. 1580

Glass re-inforced concrete

Ordinary concrete

Resin concrete*

0.5

1.0

1.5

2.0dept

h(m

m)

Glass re-inforced concrete

Ordinary concrete

Resin concrete*

20

40

60

80

10

30

50

70

90100st

reng

th (

N/m

m2 )

Compressive Strength

Water Absorption

Hydraulic choices with ACO ParkDrain®*

1. Constant invert, level ground

- effective drainage but may need more regularmaintenance due to greater chance of silting.

2. Constant invert, sloped ground

- improved hydraulic capacity over system 1.

3. Stepped invert, level ground

- will give a similar hydraulic capacity to system 2.

*ACO Mini ParkDrain® only available as constant invert

5

ACO ParkDrain®

CHANNEL RANGE LAYOUT

PD10

0C 3

06PD

100C

123

PD10

0C 2

0.3

PD10

0C 1

0.1

PD10

0C 3

0.1

PD10

0C 1

5.1

PD10

0C 2

0.1

PD10

0C 2

5.1

PD90

0C

PD10

0C 2

08

PD10

0C 1

08

PD10

0C 3

08

PD10

0C 1

0.3

PD10

0C 3

0.3

Closing endcap

Level invert channel

Step connector

Inlet/outlet endcap

Rodding access unit

Sump unit

ACO ParkDrain® is the next generation of surfacedrainage with major advantages in car parks,pedestrianised areas and hard-landscaped locations.

Its one piece design with integral grating means it is not vulnerable to vandalism or loosening.Rodding Access units and the universal Sump unitensure easy maintenance.

It is a product especially recommended to be used in schools where children play due to itsmonoblock composition it has no removable partswhich could lead to injury.

Its Load Class C 250 certification means it can bedeployed in a wide number of locations wherelight vehicle traffic can be expected.

Its unique colouring means it can either beunobtrusively blended with its surroundings - e.g.coloured as the adjoining pavement - or used as amarker or even signage e.g. coloured white oryellow to mark roads. The colour is maintained, no rubbing off or being dissolved.

It is compatible with all types of paving materials,and the flat sides enable pavements to be laiddirectly to the unit’s edge.


Complementing the range, ACO Mini ParkDrain® isspecifically designed to provide a drainage solutionfor small drainage areas and applications that haverestricted depth installation.

6

ACO ParkDrain®

INNOVATION IN APPLICATION

7

ACO ParkDrain®

HYDRAULIC PERFORMANCE TABLES

Total design flow capacities l/s for each constant depth channel assuming lateral inflow to channel.

PD100C 10.1 Overall depth = 250mmLength to outlet Flow (I/s) Ground slope

(m) 0.0% 0.5% 1.0% 1.5%5 9.0 10.5 11.7 12.910 8.4 10.9 12.6 14.215 8.1 11.3 13.5 15.120 7.8 11.5 14.0 15.925 7.4 11.7 14.4 16.530 7.1 12.0 14.7 17.140 6.7 12.0 15.0 17.760 6.1 12.0 15.3 18.580 5.6 12.1 15.5 19.2


(m) 0.0% 0.5% 1.0% 1.5%5 11.1 12.9 14.2 15.410 10.4 13.3 15.4 17.115 10.0 13.6 16.0 18.020 9.6 13.8 16.6 18.825 9.3 14.0 17.1 19.330 8.9 14.1 17.6 20.040 8.3 14.3 18.2 20.660 7.6 14.5 18.4 21.480 7.0 14.7 18.6 22.5


(m) 0.0% 0.5% 1.0% 1.5%5 13.5 15.5 17.1 18.210 12.6 15.8 18.1 19.715 12.0 16.1 18.8 20.920 11.3 16.3 19.4 21.925 10.9 16.4 20.1 22.830 10.4 16.5 20.6 23.740 9.8 16.7 21.0 24.560 9.2 16.8 21.3 25.580 8.5 17.0 21.7 26.6


(m) 0.0% 0.5% 1.0% 1.5%5 16.1 18.2 19.9 21.410 15.1 18.4 21.0 22.715 14.3 18.6 21.8 24.020 13.6 18.8 22.3 25.125 13.0 19.0 22.7 25.930 12.4 19.1 23.1 26.740 11.7 19.2 23.6 27.460 11.0 19.2 24.1 28.280 10.1 19.4 24.8 28.6


(m) 0.0% 0.5% 1.0% 1.5%5 18.9 21.1 22.9 24.610 17.9 21.2 24.1 26.315 17.0 21.4 24.8 27.620 16.2 21.6 25.3 28.525 15.4 21.6 25.8 29.430 14.6 21.7 26.2 30.140 13.8 21.7 26.7 30.960 12.1 21.8 27.2 31.780 11.8 21.9 27.9 32.1

PD100C 10.1/PD100C 15.1/PD100C 20.1/PD100C 25.1/PD100C 30.1Length to outlet Flow (I/s) Ground slope

(m) 0.0% 0.5% 1.0% 1.5%5 25.6 25.6 26.4 26.810 24.7 25.6 25.7 26.215 23.3 25.2 25.3 25.920 20.3 24.0 25.0 25.925 16.9 22.0 24.9 25.930 13.5 20.7 24.8 26.0

Total design flow capacities in I/s for a steppedchannel system assuming equal numbers of each height of channel are used with steptransition channels.

Note: Refer to ACO Technical Handbook and Design Guide for further hydraulic details.

Maximum total flow capacities (l/s) for each constant depth channel, assuming lateral inflow to the channel

ACO Mini ParkDrain® Overall depth = 125mmLength to outlet Flow (I/s) Ground slope

(m) 0.0% 0.5% 1.0% 1.5%5 1.4 1.9 2.2 2.510 1.3 2.0 2.4 2.615 1.2 2.1 2.5 2.720 1.1 2.2 2.6 2.825 1.1 2.3 2.7 2.930 1.0 2.4 2.8 3.035 1.0 2.4 2.8 3.140 0.9 2.5 2.9 3.2

The maximum catchment depth drained by thechannel may be derived from the tables.

For total flow Q (l/s); Catchment Depth CD (m);Length of channel to outlet Lo (m); Rainfallintensity i (l/s/m2)

Then Q = CD x Lo x i. Hence CD = Q / (Lo x i)

8


HYDRAULIC PERFORMANCE TABLES

9


PARTS TABLE

Channels

Dimensions (mm) Connections AvailabilityDepth Weight Closing

Description Order No. Overall Invert Length (kg) Sumps Endcaps

Mini ParkDrain® 30125 125 105 1000 24.7 PD900C Mini ParkDrain® 306 closing end cap

Access unit

Dimensions (mm) Connections AvailabilityDepth Weight Closing

Description Order No. Overall Invert Length (kg) Sumps Endcaps

Mini ParkDrain® access 31253 125 105 1000 28.5 PD900C Mini ParkDrain® 306 closing end cap

End cap

Dimensions (mm) Wide WeightDescription Order No. Depth Overall Invert Bore Overall Length (kg)

Mini ParkDrain® 306 closing end cap 30306 305 - - 150 25 2.5

1000mm 105m

m

125m

m

150mm

1000mm 105m

m

125m

m

150mm

25mm

305m

m

150mm

Access unit has performed Ø110mm knockout under access cover for vertical outlet

10

ACO ParkDrain®

PARTS TABLE

Note: As with all pre-cast products, polymer concrete units are subject to weight and dimensional tolerances.

Channels

Dimensions (mm) Connections AvailabilityFall Type Depth Weight Endcaps Step

Description Order No. Level Sloped Overall Invert Length (kg) Sumps Closing Inlet/outlet Connector

PD100C 10.1 30101 L - 250 225 500 16.3 PD900C PD100C 306 PD100C 108 -

PD100C 15.1 30151 L - 275 250 500 17.3 PD900C PD100C 306 - -

PD100C 20.1 30201 L - 300 275 500 18.3 PD900C PD100C 306 PD100C 208 PD100C 123

PD100C 25.1 30251 L - 325 300 500 19.3 PD900C PD100C 306 - -


150mm 100mm500mm

250-

350m

m

Channel

11

ACO ParkDrain®

PARTS TABLE

PD100C Rodding access/junction unit †

Dimensions (mm) Connections AvailabilityFall Type Depth Weight Endcaps Step

Description Order No. Level Sloped Overall Invert Length (kg) Sumps Closing Inlet/outlet Connector

PD100C 10.3 30103 L - 250 225 500 13.0 PD900C PD100C 306 PD100C 108 -



Endcaps

Dimensions (mm)Depth Width Weight

Description Order no. Overall Invert Bore Overall Length (kg)

PD100C 306 Closing 30306 350 - - 150 25 2.5

PD100C 108 Inlet/outlet 30108 250 225 100 150 25 1.5

PD100C 208 Inlet/outlet 30208 300 275 100 150 25 1.8

PD100C 308 Inlet/outlet 30308 350 325 100 150 25 2.1

Step connector



PD100C 123 Step connector 30123 - 50 94 150 123 0.9

105mm150mm150mm

350m

m

25mm

Ø11

0mm

25mm

Closing endcap inlet/outlet endcap

Step connector

† Rodding Access/Junction unit can be inserted between Constant Depth units with matching overall/invert depths.

Ø110mm

150mm 100mm500mm

250-

350m

m

Rodding access/junction unit

Sump unit



PD900 C Standard sump unit 30900 665 640 100 150 500 35

Foul air traps



920 Foul air trap PVC-U Ø110mm 2640 - 395 100 110 - 0.5

922 Foul air trap PVC-U Ø160mm 2638 - 375 150 160 - 1.9

940 Roddable foul air trap MDPE Ø110mm 7931 - 480 100 110 - 0.6

950 Roddable foul air trap MDPE Ø160mm 7932 - 435 150 160 - 0.8



820 Drain union PVC-U Ø110mm 0056 - - 100 110 100 0.1

822 Drain union PVC-U Ø160mm 0058 - - 150 160 150 0.5

12

ACO ParkDrain®

PARTS TABLE

500mm

665m

m

640m

m

480m

m

640m

m 380m

m

395m

m

920 Foul air trapPVC-U Ø110mm

950 Roddablefoul air trapMDPE Ø160mm

435m

m

13.1

l/s

30.1

l/s

940 Roddablefoul air trapMDPE Ø110mm

480m

m

14.6

l/s

922 Foul air trapPVC-U Ø160mm

375m

m

27.4

l/s

Sump unit

820 Drain unionPVC-U Ø110mm

822 Drain unionPVC-U Ø160mm

* Sump unit knockouts suit Constant Depth unit depths as indicated in the product table. ACO sump units allow two way drainage unitconnection with discharge to sub-surface drainage.

Note: See product table to matching inlet/outlet endcap with correct drainage unit. Outlet endcaps aresupplied as two components to be site assembled to suit flow direction.

13

ACO ParkDrain® & ACO Mini ParkDrain®

SITEWORK INSTALLATION

1.0 Ground Conditions

The customer should ensure thatthe minimum dimensions shownare suitable for the existingground conditions. Engineeringadvice may be necessary.

2.0 Block Pavements

The channel must be supportedlaterally and therefore blocksmust be restrained frommovement by bedding securelye.g. by using a Polymer ModifiedMortar for bed and perpendicularjoints (for example RONAFIXMortar Mix C from Ronacrete: Tel01279 638 700). Engineeringadvice may be required.

3.0 Surface Cracks

Alternate crack control andmovement joints transverselywithin bed and haunch mayreduce unsightly surface cracking.

4.0 Joint Sealant

Where ACO Drain channel jointsand fittings are to be sealed(where used in foul waterapplications or whereimpermeability is required)contact a sealant specialist forguidance on the most appropriatesealing compound to use.

5.0 Surface Protection

In asphalt pavements avoidcontact between compactionequipment and channel/grating. This may be achieved by ensuringthat the finished surface level liesabove the grating level (by atleast 3mm) Stones should beremoved prior to laying/rollingwearing course.

ACO ParkDrain®

(To Load Class C 250)ACO Mini ParkDrain®

(To Load Class D 400)

Note: For ACO Mini ParkDraininstallations to Load Class C 250,the minimum concrete bed andsurround may be reduced to150mm.

Asphalt pavement

150mm

150m

m

Top of haunch 25mm maximumbelow wearing course.

Concrete bedand haunchminimum compressivestrength 25 N/mm2

See Note 5.0

Concrete pavement

150mm

150m

m

Note: Movement joint to

Engineers detailConcreteslab


Block pavement

150mm

150mm

150m

m

Block


Asphalt pavement

Minimum 200mm

See Note 5.0

Min

imum

20

0mm

Concrete bed and haunch minimum compressive strength 25N/mm2

Concrete pavement

Minimum 200mm

Note: Expansion joint to engineers detail

Min

imum

20

0mm


Concreteslab

Concreteslab

Block pavement

Minimum 200mm

Note: Block bedded usingmortar (see note 2.0)

Option 1 Option 2

Block Block

Min

imum

200

mm

Approx 225mm


ACO ParkDrain®

Model Specification ClauseThe surface drainage system shall be as ACO ParkDrain® channels as supplied by ACOTechnologies plc; all materials and componentswithin the scope of this system shall be obtainedfrom this manufacturer. The system shall becertified to BS EN 1433:2002 Load Class C 250 andBS EN 124:1994 for the access and gully unitcovers; load test certificates shall be supplied to theSupervising Officer.

The system shall be of units 500mm long, 100mmnominal internal width, 150mm external width,one piece manufacture in polyester resin concrete,with integral resin concrete grating featuring 8mmwide downward flared inlet slots to ACO registeredpattern providing a minimum inlet area of18,300mm2 per metre.

The standard units shall be installed with themanufacturers level invert and transitional slopinginvert units, rodding access, sump and accessoriesas required for the scheme.

The system shall be installed in accordance withthe manufacturer’s printed recommendations, andthe work carried out as specified on theSupervising Officer’s drawing no.* and inaccordance with recognised good practice.Standards of workmanship shall generally be asspecified in BS EN 752:2008 and BS 8000:Part14:1989.

* Please insert drawing no. relevant to the project.

14

15


Model Specification ClauseThe surface drainage system shall be as ACO MiniParkDrain® channels as supplied by ACOTechnologies plc; all materials and componentswithin the scope of this system shall be obtainedfrom this manufacturer. The system shall becertified to BS EN 1433:2002 Load Class D 400and BS EN 124:1994 for the access and gully unitcovers; load test certificates shall be supplied to theSupervising Officer.

The system shall be of units 1000mm long,100mm nominal internal width, 150mm externalwidth, one piece manufacture in polyester resinconcrete, with integral resin concrete gratingfeaturing 8mm wide downward flared inlet slots toACO registered pattern providing a minimum inletarea of 18,300mm2 per metre.

The standard units shall be installed with themanufacturers level invert units, rodding access,sump and accessories as required for the scheme.

The system shall be installed in accordance withthe manufacturer’s printed recommendations, andthe work carried out as specified on theSupervising Officer’s drawing no.* and inaccordance with recognised good practice.Standards of workmanship shall generally be asspecified in BS EN 752:2008 and BS 8000:Part14:1989.

* Please insert drawing no. relevant to the project.

Technical Support ServicesTo support architects, engineers and contractors in designing and installing ACO ParkDrain® schemes, ACO’s Design Services Department offers computer-aided scheme design, hydraulic performancecalculations and installation advice services. Our Telephone Hotline 01462 816666, Fax Hotline 01462 851081, e-mail [email protected] andwebsite www.aco.co.uk enable us to give you the response you need.

PC20714

ACO Technologies plc

ACO Business Park,Hitchin Road,Shefford,Bedfordshire SG17 5TE

Tel: 01462 816666Fax: 01462 815895

e-mail Sales: [email protected] Technical: [email protected]

website: www.aco.co.uk

© March 2010 ACO Technologies plc. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since theconditions of use are beyond the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose, and that the actual conditions of use are suitable. This brochure and any advice isprovided by ACO Technologies plc (the Company) free of charge and accordingly on terms that no liability including liability for negligence will attach to the Company or its servants or agents arising out of or in connection with or inrelation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of continuous productdevelopment and improvement renders specifications liable to modification. Information provided in this brochure is therefore subject to change without prior notification.

ACO CARES ABOUT THE ENVIRONMENTPrinted on material approved by the Forest Stewardship Council (FSC) who provide a means of assuring that products come from sustainably managed forests.

Next generation of surface drainage ParkDrain_Mini ParkDrain.pdf · 2017. 12. 6. · 303 - 4...

Documents

Transcript of Next generation of surface drainage ParkDrain_Mini ParkDrain.pdf · 2017. 12. 6. · 303 - 4...