Nexans Fibre Trunking System Installation Manual-V1
-
Upload
alexandru-halau -
Category
Documents
-
view
225 -
download
0
Transcript of Nexans Fibre Trunking System Installation Manual-V1
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
1/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
Nexans Installation Manual
Fibre Trunking System
Jan 2015 V1.0
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
2/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Important Note:Installation may require special tools like saw, cutting machine, screw driver etc.Make sure safety protection method is provided.
Only qualified personnel is allowed.National safety regulations will overrideinstallation standards.
All Nexans installations shall be completed in accordance with (IAW) the relevantstandards. Different countries have different applicable standards. Some regionsuse a hybrid of them so depending on your location the relevant standards shallbe followed. It is important to always check for the latest versions of standards as
they are constantly being updated.
For more information about installation procedures please contact TechnicalSupport Department of Nexans Cabling Solutions.
1
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
3/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Fiber Pathway system:A Cable pathway is designed to hold data communication cables in buildings anddatacenters. The increasing data transfer between workstations,telecommunication rooms and data centers requires high-bandwidth. Being readyto run new applications more than a decade out requires a scalable, flexible andfuture proof system, datacenter now rely on fiber to connect between eachpatching area as backbone. A Fiber pathway system is specially designed toprotect fiber optic from physical. It also provides a versatile, scalable pathway thatreduces the costs associated with maintaining existing network operations andimplementing new services.
Nexans provides Fibre Trunking System to secure your valuable data transmission.Fibre Trunking System allows people to modify and mantenance during datatransmission. No need to worry about future growth, a wide range of fittings canmet any consequence.
2
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
4/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Before installation:
It is important that the correct pathway solution be installed in order to meetboth the requirements of the environment into which it is being installed and thecabling products being installed within the solution.
EN 50174-2
EN 50600-2-4
ANSI/TIA-569-B-2008
Where there is a requirement to keep other cable types away from data cablesthe separation must be such that it cannot be inadvertently changed. Forexample both the data cables should be held together with velcro and powershould be tie wrapped in place to maintain the separation distances required.
Information technology - Cabling installation- Part 2:
Installation planning and practices inside buildings
Information technology - Data centre facilities and
infrastructures. Telecommunications cabling infrastructure
Commercial Building Standard for TelecommunicationsPathways and Spaces
3
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
5/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Pathways
Where the pathway system provides continuous support, the cables mustnot be stacked more than 150mm.This is to prevent crush damage to the cablesat the bottom. EN50174-2 4.4 refers.
Use the Nexans installation software toolkit to calculate the size of containmentyou need, this is available at http://www.nexans.co.uk/eservice/UK-en_GB/navigateproduct_540160551/LAN_Calculation_Toolkit.html
Make sure the pathway systems have smooth surfaces and also be free of burrs,sharp edges or projections that can damage cable insulation and be free of
pressure points that may degrade the transmission performance of the installedsystem.
Pathways made from tray-work shall be positioned to provide a minimumclearance of 25 mm from the fixing surface and to provide as much workingspace as possible above the tray (minimum 150mm) to enable access duringinstallation and accommodate the maximum stacking height of cables.
240 System
240x100mm>1000 3mm Fiber patch cords>800 3.7mm MPO trunk cables or MPO patch cords
120 System
120x100mm>500 3mm Fiber patch cords>400 3.7mm MPO trunk cables or MPO patch cords
SLAB150mm
Min
4
http://www.nexans.co.uk/eservice/UK-en_GB/navigateproduct_540160551/LAN_Calculation_Toolkit.htmlhttp://www.nexans.co.uk/eservice/UK-en_GB/navigateproduct_540160551/LAN_Calculation_Toolkit.htmlhttp://www.nexans.co.uk/eservice/UK-en_GB/navigateproduct_540160551/LAN_Calculation_Toolkit.htmlhttp://www.nexans.co.uk/eservice/UK-en_GB/navigateproduct_540160551/LAN_Calculation_Toolkit.htmlhttp://www.nexans.co.uk/eservice/UK-en_GB/navigateproduct_540160551/LAN_Calculation_Toolkit.html -
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
6/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Cable Management on Tray/Basket
EN 50174-2:2009 in section 5.3.5 details the requirements
Cable installation, installation of cables shall be in accordance with theinstructions supplied by their manufacturers/suppliers.
Installation of cable shall be undertaken according to the installationschedule.
When installing cables, cords or jumpers appropriate techniques shallbe applied in order to:
eliminate cable stress caused by: - tension in suspended cable runs; -tightly pinched cable bundles; - ensuring that minimum bend radii are asspecified by the cable manufacturer, supplier or in accordance with therelevant product standard (rollers or other devices shall be used to avoiddamage);
Ensure that the tensile load applied to the cables and cable bundles asspecified by the cable manufacturer, supplier or are in accordance withthe relevant product standards. Unless otherwise stated in the suppliers/manufacturers specification, the maximum tensile load applied to abundle shall be that specified for a single cable;
prevent pressure marks (e.g. through improper fastening or crossovers)on the cable sheath or the cable elements;
5
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
7/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Installation of supporting bracket
A wide range of mounting hardware is provided to ensure the fiber guider couldbe mounted under any circumstance in data centers and IT rooms.
Attached to Cable Ladder or upper ceiling or Auxiliary Framing Bar is the mostcommon way for mounting:
Trapeze support:
The trapeze supporting bracket is used to attach 120/240 channel to ceilingfrom above. It is a straight bracket with 2 x M 20 threaded rod and fasteners toenable fitting of the main channel mounting bracket from overhead ceiling inyour data centers.
6
High strength Expansion
screws
Max Loading: 1000kg
Fixing the main channel on
the bracket
Interval of bracket < 1.5m
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
8/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Ladder support ( L bracket support):
The L bracket support is used to attach 120/240 channel to provide sidemounting using the M20 thread rod or on existing rod. The L bracket providesadjustable mounting mechanism to support different mounting environments.Several accessories are available to fit certain environment.
7
Ladder support on existing rod
Ladder support above ladder
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
9/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
Auxiliary Framing support :
You can attach 120/240 channel to auxiliary framing to provide side mountingusing the auxiliary framing kit.
Cabinet/Rack support :Use Cabinet/Rack support kit to attach Channel on your standard Cabinet.
8
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
10/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
1 2
3 4
9
Installation of In-Line Connectors:
In-line Connectors are used to connect a wide range of connecting hardware.
Nexans Fibre Trunking System provides Elbows, Bends, Tees and Crosses to easePathway design. All of those fitters and transits are available in 120mm and240mm width and transits allow 240mm channel convert to 120mm channel.
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
11/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
10
120 series:
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
120mmEqual Tee 120mmEqual Cross
120mmElbow
120mmVertical Tee
120mm45Internal/External Bends
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
12/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
11
240 series:
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
240mmEqual Tee
240mmEqual Cross
240mmElbow
240mm transit to 120mmVertical Tee
240mm45Internal/External Bends
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
13/14
NEXANS CABLING [email protected] www.nexans.cn/LANsystems
12
240mm to 120mm transition series:
Please refer to Nexans Technical Support Team for more information
on Site installation.
NexansFibreTrunkingS
ystem
Importantremark:Installationistobeperformedbyqualifiedservicepersonnel
240mm to120mmReducer
240mm to120mmUnequal Cross
240mm to 120mmUnequal Tee
-
7/26/2019 Nexans Fibre Trunking System Installation Manual-V1
14/14
NEXANS CABLING SOLUTIONS
Nexans Cabling Solutions APACNo 1 Middle Fute Road, Waigaoqiao Free Trade Zone, Shanghai,
200131 P.R.China
Tel: +86 21 5046 2990*180 Fax: +86 21 5046 2758
www.nexans.cn/LANsystems
Copyright@Jan2015N
exa
nsCablingSolutionsAPAC
http://www.nexans.cn/LANsystemsmailto:[email protected]:[email protected]://www.nexans.cn/LANsystems