NEWS - Lamello · getting rid of the need to open bags of ... with diamond tipped profile groove...
Transcript of NEWS - Lamello · getting rid of the need to open bags of ... with diamond tipped profile groove...
NEWS
Cabineo Saving time in production
Tips & tricks Gluing drawers efficiently with the Tenso
Zeta P2 Fastest joining system with a power tool
012018
Request a
free Zeta P2
demonstration
lamello.com
32
NILO AG in Wettingen has a long history. Founded in 1906 by Josef Berz, the company was acquired by Nik Meier in 1982. Currently the company has a workforce of 23, and specialises in interior fitting, fitted kitchens and door production. NILO AG is known for its passion for passion for cabinet making, combined with the latest technology. The firm has been working with the new Cabineo cabinet connector since 2017, after bench cabinet maker Roger Jakob came across the innovation in an industry magazine and went on to request a free information pack at www.cabineo.ch.
A quick decision
The product sample and flyer that he received convinced both him and pro-duction manager Matthias Munk. Munk, who served his apprenticeship with the company, explains that, “the decision to comprehensively test the new product was a very quick one.” The results convinced everyone involved in the production process, and since then they have used Cabineo for con-necting all the cabinets they produce. In addressing why they decided to change over to Cabineo, Munk smiles and says: “There are several reasons: the stackability – i.e. flat-pack delivery with preassembled connectors – the ease of assembly and time savings, getting rid of the need to open bags of hardware, and the high clamping force.”
Cabineo benefits
· One-piece connector without dowel
· Quick connector insertion
Cabineo benefits
· Flat-pack delivery with preassembled connectors
· No bags of loose fittings
Cabineo: Impressive benefits From exclusive individual pieces to large production orders: NILO Schreinerei Küchenbau AG in Wettingen specialises in the development and manufacture of custom-made and series production furniture. The company now uses the new Cabineo with high clamping force from Lamello AG to connect all their cabinets. Cabineo benefits
· Cutting and drilling on any CNC machine
· No more edge-drilling
Order an info
pack for free
cabineo.ch
Cabineo Part no. Cabineo Starter Set, Cabineo 8 + 12 (40 pcs eacht),incl. Cabineo hex bit and set of cover caps (40 pcs)Cabineo 8, for dividing panels, 500 pcsCabineo 8, for dividing panels, 2000 pcsCabineo 12, 500 pcsCabineo 12, 2000 pcsCabineo hex bit
186305186310186311186320186321276312
Quick and easy assemblyOne current order in Wettingen involves the production of more than 160 cupboards. The first step is to cut
panels to size on the horizontal panel saw. The workpieces are then format-ted and machined on one of the CNC machines available in the workshop. This example shows the Homag BMG 511 in use. A 15 mm drill is used to make the three holes for the connec-tor. The series hole drill can also make the 5mm hole for the Cabineo – no change of tool is required. The Cabineo can then be very quickly inserted, by
Cabineo benefits
· Quick assembly without pre-fitting of dowels or screws
· Protruding screw aligns the connection perfectly
· Strong connection
that before they changed over, cabinets were delivered fully assembled. “Since the changeover to Cabineo, we have benefited by being able to assemble on-site and we are really happy with the time we save.” Fitter Walter Rudolf con-firmed that assembling the cupboard with Cabineo is much quicker and easier than with the cam. He goes on to say: “The protruding screw means we can precisely align the machined furniture parts, and connecting them just needs a cordless drill.” If the connector needs to be invisible – which is standard at NILO AG – cover caps are used. These can be fitted onto Cabineo in seconds, and Lamello AG offers them in various colours. Since introducing Cabineo, NILO AG has already used 2,500 connectors and is absolutely won over by the product. “We have been using Lamello system solu-tions for some years, and are pleased to have such an innovative partner at our side,” Munk tells us at the end of the tour.
simply tapping it into the hole. The company uses the Cabineo 12 for corner connections, and the Cabineo 8 for dividing panels.
Cabineo saves timeDuring our discussion, Munk tells us
Divario P-18Tenso P-14Clamex P-14
Tenso P-14
54
4 minutes
Insert 16 connector halves = 30 seconds
Apply glue 4 corners = 30 seconds
Connect4 corners = 30 seconds
Cut 16 cuts = 2 minutes
Connection is complete within minutes, without waiting time, clamps, or secondary processes
Fastest joining system with a power tool
Ready in 4 minutes!
Save time with the Zeta P2A cabinet put together in just 4 minutes
Zeta P2 Part no.with carbide tipped profile groove cutter in systainerwith diamond tipped profile groove cutter in systainer
SpechtenhauserSpechtenhauser has been using the Lamello P-System connector for more than 3 years. The business benefits from the company’s demo machine concept: Lamello provides the option of leasing a Zeta P2 biscuit joiner in order to test the machine without actually having to purchase one. The Zeta P2 won the team over during initial testing of user friendliness, reliability and speed. Along with the time saved during assembly, the company sees the key benefits of the P-System to be the precision, the aesthetics, and the stackability of parts with connectors inserted.
P-System Tenso P-14 gluing system with the Zeta P2
Alternative gluing process
Insert
Wait
Apply glue
Release clamp
Connect
Connect
Clean
Finished!
Clamp
Finished!
Cut
Machining
Check
1.
1.
6.
2.
2.
7.
3.
3.
8.
4.
4.
9.
5.
5.
10.
Apply glue Insert the connector
101402S101402DS
Clamex P-14 Part no.Box of 300 pairsBox of 1000 pairs
Tenso P-14 with preload function Part no.Box of 300 pairs (without preload clip)Box of 1000 pairs (without preload clip)
Divario P-18 Part no.Starter-Set 80 pairs incl. installation toolStarter-Set 80 pairs in systainer Size I, incl. installation tool and marking jig in metalBox of 300 pairs
145346145356
145550S
145551 145560
145425145435
Request a
free Zeta P2
demonstration
lamello.com
76
Be inspired by our diverse connection solutions and the opportuni-ties they offer! Visit our website to discover further uses. With our connector finder and the P-System configurator, you’ll quickly find the ideal solution for your specific situation!
Inspiration
Work pieces can
immediately moved to
storage or stacked
Compact shipment
volume due to
delivery in parts
Adjust the size of
individual parts on
site
Short installation time thanks to
pre-installed joining elements
More
ideas on our
websiteP-System
“You can save a great deal of time.
Parts are connected and can be sanded
or oiled straight away.”
Mr Bernhard Niederhauser, Manager of the Lamello AG
joinery in Bubendorf, Switzerland
Place the stop square on the outer table surface and cut an initial row of grooves
Workpieces up to 80 mm thick can be drilled using the long Clamex P drill jig
Slide on the multifunctional stop square and fix at the preferred height
Adjust the swivelling front to 45 degrees and cut a second, offset row of grooves in order to make the connection more stable
Quick and stable connectionsIn the new Lamello AG training centre, a bar was created from maple and oiled, with natural raw edges and a longitudinal steel profile between the left and right side. Inspired by the many P-System customers who use the Clamex P-14 for their bar or kitchen worktops, the Clamex P-14 was used as a connection solution. The worktop, which goes all the way to the floor, is connected to the horizontal panels using a mitre. The workpieces are easily fitted together and powerfully fastened with or without glue – all without the use of complicated clamping aids. The two offset grooves make the rows bar extraordinarily strong.
Fast, easy glueing
without the need
for additional
glueing aids
4.
1.
5.
2.
6.
3.
98
Apply glue
Cut a profile groove into the side using depth setting 18
Join the workpieces
Insert an element without a spring into the front piece
Insert an element with a spring into the drawer sides
Cut a profile groove into the front piece using depth setting 10
Additional application for center panels 19 mm thick
How it works:
Glue drawers efficiently
Glue drawers efficiently
Register for our
newsletter at
lamello.com to benefit
from the next Tips &
Tricks we’ll be
sending out
Would you like to glue
drawers with 12-mm-thick
panels, without any need
for clamps or presses?
It’s possible with the
Tenso P-14.
Tips tricks
LK 10
Original wooden biscuit The original biscuit that always fits! Swiss production, Swiss timber, Lamello quality
Wood biscuits carton Size Quantity Part no.Size 20 56 × 23 × 4 mm 1000 pieces Size 10 53 × 19 × 4 mm 1000 pieces Size 0 47 × 15 × 4 mm 1000 pieces Size H9 38 × 12 × 3 mm 1000 pieces
Classic X Part no.Classic X in systainer 101600SClassic X in carton 101600K
Current products from our range
Invis Mx2The unique invisible connection for highest
demands on aesthetics, stability and productivity
Invis Mx2 connector set with 14 mm stud (Part no. 6012300)
Invis Mx2 connector set with 30 mm stud (Part no. 6012301)
10H90
20
144020144010144000144009
Classic X The original biscuit joiner for every workshop. Choose Lamello for precision, reliability, longevity and many other benefits
Invis Mx2 Starter Kit Part no.including MiniMag Mx2, 20 Invis Mx2 connector sets with 14 mm stud, Rasto drill jig, screw bit, flexible shaft, insertion jig, in systainer 6100300Invis Mx2 connector set with 14 mm stud 20 pieces 6012300Invis Mx2 connector set with 30 mm stud 20 pieces 6012301
9
1110
In focusCNC partner networkBenz floating trimming unit for P-System
connectorsBeck konzept AG has been using the Lamello Clamex P Medius 14/10 and Tenso P-14 connectors for some years. The precise groove depth, on the Tenso P-14 in particular, has the benefit of ensuring that the connectors’ maximum clamping force is achieved.
“This is why we use a Benz floating trimming unit with a special base on
our CNC machine. It allows us to automatically compensate for differences in panel thickness,”
reports production manager Christoph Bucher. Tenso P-14 con-nectors are inserted straight after cutting and act as a gluing aid.
Cutting P-System grooves on
the Holzher NextecIt goes without saying that the software supports the cutting of all standard nesting connectors which only require vertical machi-ning. This solution for the Lamello P-System connector solution is unique, reliable and unmatched when it comes to speed. Connector pockets can be milled into the panel surface along the X and Y axis with the optional NEXTEC Clamex package. The intelligent BetterNest software and a specially developed tool also allow perfectly positioned Clamex pockets to be cut into the edges of furniture parts, before formatting them to size within a single clamping operation.
Masterwood Project TF 100 The Masterwood Project TF 100 is a highly compact CNC machine equipped for drilling, milling and cutting grooves, and only requires a production area of approx. 5m2. The TF 100 project enables the easy implementation of different types of connections from Lamello, such as the Clamex-P and Cabineo. A large tool magazine with 6 positions enables a P-System groove cutter to be fitted onto a vertical tool holder and also onto an angle aggre-gate. The “Masterwork” software enables easy and intuitive processing for the Clamex P connection system from Lamello.
Our website got a new look at the start of this year and is now also optimised for mobile devices such as tablets and smartphones. We would like to provide you with the best possible support in planning and implementing your projects, in the form of a new and significant range of search and planning options for our connection solutions, inspiring application ideas, tips and tricks, and much more. Choosing and planning the right connectors should be just as quick, useful and easy as using the products themselves!
Experience our new website!
Find the right connector!The new connector search enables you to enter the material thickness or width to be connected, or whether the connector should be detachable or invisible. The finder will then display the right connecti-on solutions.
P-System configurator for planningRefer to the last page
Efficiently request products from specialist retailersAfter our videos and content have convinced you of the product bene-fits, you can note the individual pro-ducts on your wish list and request them directly from your specialist retailer, allowing you to obtain an appropriate quote quickly and easily.
Be inspired!The new Inspiration section includes reports by customers who are passio-nate about our products, explaining how Lamello saves them time and money. The “Tips and Tricks” which are available for download are inten-ded to make your day-to-day work easier, with ideas that have been tried and tested on a practical basis.
lamello.com
03/1
8
Part
no.
982
2001
EN
Lamello AG | Joining technology Hauptstrasse 149 | CH-4416 Bubendorf Tel.+41 61 935 36 36 | Fax +41 61 935 36 06 [email protected] | www.lamello.com
Exclusive for you
Of course you can also fill out the coupon online:
We look forward to being in touch! Your Lamello Team
Info pack: Cabineo
with wood samples
Info pack: P-System
with wood samples
Zeta P2 demonstration
Contact us and order free of charge:
Fill in, take a picture and send an e-mail to:
How it works:
Are you building a piece of furniture
and need to find the right P-System
connector? The configurator will help
you find the right connector, and tell
you how to position it.
Displaying the connection situation using the input information
Select processing and connector typeSelect the connection situation and enter dimensions
P-System
brochure
Catalog 2018
Invis Mx2 flyer
Please contact me
Just take a picture of the QR code and click the linkwww.lamello.com
Company
Last name
First name
Address
ZIP
Country
Available on
our website now
P-System
configurator
1. 2. 3.