NEWS 15.03

Via Umbria n. 3 – 05100 Terni – Italia – Tel / Fax 0039 744 305298 – Mobile 0039 337 780232

Email: [email protected] – Web Site: www.belluccisrl.com NEWS 15.03.2018

LATTUADA TLR 15 C- year 1993 Molatrice rettilinea 15 mole – vista e piaciuta Straight line edging machine 15 wheels – as is Thickness: 3- 35 mm

Euro 14.000,00 as is

LATTUADA TL 10 AV – year 1995 Molatrice rettilinea 10 mole – vista e piaciuta Straight line edging machine 10 wheels – as is Variable angle Thickness: 3- 30 mm Dim. Min. : 85 mm Speed: 0,3 – 5 m/min Power: 21 kw


SCHIATTI FPS 10 – anno 1988 Molatrice rettilinea 6 mole – vista e piaciuta Straight line edging machine 6 wheels – as is Thickness: 3- 20 mm Dim. Min. : 150 x 150 mm Speed: 0,5 – 2,5 m/min Power: 8,1 kw

Euro 9.000,00 as is

mailto:[email protected]

http://www.belluccisrl.com/

SCHIATTI FPS 15 – anno 1985 Molatrice rettilinea 8 mole – vista e piaciuta Straight line edging machine 8 wheels – as is Thickness: 3- 20 mm Dim. Min. : 150 x 150 mm Speed: 0,6 – 4,4 m/min Power: 12,7 kw

Euro 5.500,00 as is

LATTUADA AL4 E – year 2007 Molatrice rettilinea 4 mole – vista e piaciuta Straight line edging machine 4 wheels – as is Flat edge : 12 mm Thickness: 3- 20 mm Dim. Min. : 60 x 150 mm Speed: 1,2 – 6 m/min Power: 6,5 kw

Euro 7.000,00 as is

SCHIATTI AR/2M Molatrice rettilinea 2 mole – vista e piaciuta Straight line edging machine 2 wheels – as is Thickness: 3- 17 mm Dim. Min. : 150 x 150 mm Speed: 1,2 – 6 m/min Air compr. Capacity: 15 lt

Euro 3.800,00 as is

BOTTERO 746 AVL – anno 1999 Tavolo da taglio per laminato – visto e piaciuto Cutting table for laminating glass – as is Power: 18,6 kw


INTERMAC STORK 3700 – anno 2003 Tavolo da taglio automatic – visto e piaciuto Cutting table automatic – as is Thickness: 2 - 19 mm Dim. Min. : 150 x 150 mm Speed: 100 m/min Power: 6 kw Pneumatic supply 7 bar


ITALMEC COMPUTERIZED 3 - anno 1996 Tavolo da taglio automatic – visto e piaciuto Cutting table automatic – as is Power: 3,5 kw Pneumatic supply 6 bar

Euro 7.000,00

DF 7 Tavolo da taglio - visto e piaciuto Cutting table – as is

Euro 900,00

BOTTERO 511 LAM – year 2009 Tavolo da taglio per stratificato – visto e piaciuto Cutting table for laminating – as is Max. cut: 3700 mm Min. thickness: 3+0,38pvb+3 mm Max. thickness: 6+3,04pvb+6 mm Ultra fast lamp


LINEA SILEMECCANICA – year 2006 Linea per stratifica PVB - visto e piaciuto Laminating line PVB - as is Size: 2600x4500 Autoclave Italmatic 2600x5100

Euro 270.000,00 as is

RCN LAMMY 180 – year 2008 Forno per laminazione– visto e piaciuto Laminating furnace - as is Dim.Interne : 1800 x 3000 mm Thickness: up to 100 mm Silicone sheet Eva film


INTERMAC MASTER BEVEL 1500 - year 2000 Centro di lavoro - visto e piaciuto Cnc work centre - as is Numerical control: Oasi S10 5 axis 3080x1650xh245 Max. bevel angle: 15° Power : 20 kw

Euro 7.000,00 as is

BAVELLONI ALPA 315-4 PF - year 2002 Centro di lavoro - visto e piaciuto Cnc work centre - as is Thickness: 2-100 mm Speed: 0-43 m/min Power: 33 kwt Working hours: 6100

OPTIONED

Euro 22.000,00as is

BAVELLONI NRG 250 /3 – year 2007 Centro di lavoro con CNC – visto e piaciuto Cnc work centre – as is 3 axis Thickness: 3- 19 mm Max. workable: 2,5 x 1,2 m Speed : 0 – 65 m/min Power : 23 kw Spindle speed : 0 -11000 r/mm

OPTIONED

Euro 22.500.00 as is

BAVELLONI 1604 – anno 2000 Lavatrice verticale – vista e piaciuta Vertical washing machine – as is 4 brushes Thickness :

Euro 4.000,00 as is

Euro 6.000,00 reconditioned

FOREL – anno 2002 Butilatrice – vista e piaciuta Butil – as is

Euro 2.000,00 as is

VENTOSA RBB 2PP – year 2009 Ventosa – vista e piaciuta Vacuum group – as is Capacity 180 kg Rotation: 90° Pneumatic

Euro 1.800,00 as is

CLASSIFICATORE RBB - year 2007 Classificatore semiautomatico - visto e piaciuto Storage pack semiatomatic – as is 16 positions Jumbo


BOHLE Lampada UV – visto e piaciuto UV lamp – as is

Euro 400,00 as is

RETTILINEE / EDGER

BAVELLONI MD5 – year 1998 Molatrice rettilinea 5 mole – vista e piaciuta Straight line edging machine 5 wheels – as is Filo piatto Thickness : 3-25 mm Dim. Min.: h 50 mm Speed :0,4-5 m/min Power : 7,8 kw

Euro 7.000,00 as is


T BAVELLONI TM4 - year 2004 Molatrice rettilinea 4 mole – vista e piaciuta Straight line edging machine 4 wheels – as is Thickness 3-25 mm Min workable 80 x 80 mm Speed 0-5 Mt/min power 10.7 Kw

Euro 7.800,00 as is


T BAVELLONI PR88 - year 1997 Molatrice rettilinea 8 mole – vista e piaciuta Straight line edging machine 8 wheels – as is Min workable 50 mm Thickness 3-31 mm Speed 0.5 - 5 mt/min Power 16.7 Kw

Euro 12.000,00as is


ZANETTI RETTICOR FP 12 – year 1990 Molatrice rettilinea 12 mole – vista e piaciuta Straight line edging machine 12 wheels – as is Flat edge Thickness : 2-34mm Speed : 0- 4,5 m/min Power : 15 kw Length : 9,6 m Min. workable : 40 x 40 mm

Euro 2.500,00 as is

ZANETTI FT7 – year 1991 Molatrice rettilinea 7 mole – vista e piaciuta Straight line edging machine 7 wheels – as is Pencil edge Thickness : 2- 20 mm Speed : 0- 4,5 m/min Power : 13 kw Length : 8 m Min. workable : 75 x 120 mm

Euro 2.500,00 as is

ZANETTI RETTICOR FP 6 Molatrice rettilinea 8 mole – vista e piaciuta Straight line edging machine 8 wheels – as is Thickness : 2-20 mm Speed : 0-4,5 m/min. Power : 8,8 kw Length : 5,2 mt Min. workable : 75 x 120 mm

Euro 3.000,00 as is

N

SCHIATTI BF8 1200+BFT 1600 – year 2015 R Linea di bilaterali– vista e piaciuta Double edger line - as is Thickness : 3-12 mm Speed : 1-10 m/min. Pencil edge Min. workable : 80x 1200 – 120 x 1600


T SCHIATTI Linea di bilaterali – vista e piaciuta Double edger line - as is Thickness: 2-8 mm Dim. Max.: 1600 x 3000 mm Speed : 1-10 m/min. Pencil edge


T BAVELLONI MB10 PN90 SYRY – year 1997 Linea di bilaterali – vista e piaciuta Double edger line –as is MB1 workable size 1800 x 1600 mm MB2 workable size 2100 x 3060 mm min workable 150 mm thickness 3-12 mm power 44 Kw


T INTERMAC/BUSETTI F8 – year 2003 Linea di bilaterali 8 mole – vista e piaciuta Double edger line 8 wheels –as is Size 2500 x 1500 mm With transfer


DELTAPROGETTI – year 1997 Linea di bilaterali – vista e piaciuta Double edger line –as is "U" configuration with: charger + platform+ transfer grinder+ transfer grinder+ drilling station, +palletizer washing machine + swivel platform perimeter protectors and photocells. Sheet dimensions max 1000 x 2000 - min 130 x 150 Thickness mm 3- 12 Spindles n. 4 + 4 x machine Drill with 2 pairs of heads with handwheel positioning Washing machine 1300 with 2 pairs of brushes - 1 double tank - 3 blow-pairs - prewash and rinse


MOLATRICI MANUALI / MANUAL EDGER

CAMBI ANGOGLASS Molatrice per angoli - vista e piaciuta Edger for corner – as is Max. workable: 100 x 100 mm Thickness: 3- 20mm Power: 2,5 kw

Euro 3.800,00 as is

V ZANETTI POLIMATIC Lucidatrice – visto e piaciuto Polishing machine – as is For bevel

SS

Euro 1.000,00 as is

BAVELLONI SB1 L - year 1992 Tampone – visto e piaciuto Polishing machine – as is For shaped glass Min workable 600 mm Max workable 2100 mm Thickness 3-40 mm Power 1 kw

OPTIONED

SS

Euro 5.000,00 as is

QUARANTA - year 1997 Nastro doppio – visto e piaciuto Dobble belt – as is H nastro : 3350 mm n. nastri : 2 pz

Euro 1.500,00 as is

T DF Nastro singolo – visto e piaciuto Single belt – as is belt 1200 mm

Euro 450,00as is

T DF Nastro singolo – visto e piaciuto Single belt – as is belt 3300 mm

Euro 700,00 as is

BARETTA Tampone – vista e piaciuta Polishing– as is

Euro 600,00 as is

DF POLISHING Tamponi – visto e piaciuto Polishing – as is

Euro 800,00 as is

VITRODODI Tampone lucidante – visto e piaciuto Polishing machine – as is

Euro 600,00 as is

BISELLATRICI / BEVELLERS

T BAVELLONI MAX40 - year 1988 Bisellatrice – vista e piaciuta Bevelling machine – as is Min workable 50 mm Speed 0-5 mt/min

Euro 4.000,00 as is

BISELLATRICI SAGOMATO / SHAPED BEVELLERS

V BAVELLONI K4 - year1998 Sagomatrice automatica – visto e piaciuto Automatic shaped machine – as is Grinder and beveller Min workable 110 mm ordiam. 260 mm Max workable 2200 mm Thickness 3-20 mm Max bevel 40 mm Power 4 kw

SS

Euro 6.500,00 as is

BAVELLONI SB10 - Sagomatrice – visto e piaciuto Shaped machine – as is Min workable 100 mm Max workable 2100 mm Thickness 3+40 mm Max bevel 40 mm Power 3.5 kw

Euro 5.000,00 as is

V ZANETTI BK2 Sagomatrice – visto e piaciuto Shaped machine – as is Min workable 100 mm Max workable 2250 mm Thickness 3+20 mm Max bevel 40 mm Power 2.5 kw

SS

Euro 2.500,00 as is

TAGLIO / CUTTING MACHINES

I CMS LAMEI J - year 2004 Tavolo da taglio – vista e piaciuta Cutting table – as is For laminated glass Max cut 3700 mm Thickness : 8+8 mm – for laminated glass

Euro 8.500,00 as is

SILEMECCANICA TT 5040 – year 1999 Tavolo per sbordatura low-e – visto e piaciuto Table for frittering low-e – as is Power: 10 kw 78 db(A)

Euro 3.500,00 as is

BOTTERO 506CMF+340BCS+110BBM – year 2003 Linea di da taglio – visto e piaciuto Cutting line – as is Including: monolateral automatic loader + belt cutting table + tilting breaking table Max workable mm 3650 x 2750 thickness mm 2-25 rectilinear optimizator + FD reader


INCISIONE / ENGRAVING

BAVELLONI CAT6 M 90E Incisione rettilinea – vista e piaciuta rectilinear engraving – as is 3 Diamond wheels 3 Polishing wheels Min. workable: 130x130 mm Max. Workable: 3000 mm Thickness : 3-19 mm

OPTIONED

Euro 6.000,00 as is

GIEFFE GLASS 4000 E – year 2002 Incisione 4 mole – visto e piaciuto Rectilinear engraving 4 wheels – as is Wheels: n. 2 diamond n. 2 polishes Thickness : 3-20 mm Power : 400 v, 11 kw

Euro 5.000,00 as is

TRAPANI / DRILLERS

R MAZZAROPPI Trapano doppia testa – visto e piaciuto Drilling machine 2 heads – as is Semiautomatic

OPTIONED

Euro 3.000,00 as is

BOTTERO 770 DWM - year 2005 Trapano automatico doppia testa- visto e piaciuto Automatic drilling machine double head – as is Two tools store Double heads 16 position Max. workable 2600 x 1600 mm Min. workable 350 x 100 mm Thickness 3-19 mm Max tools diam. 70 mm


VISMARA Trapano automatico 4 testa- visto e piaciuto Automatic drilling machine 4 head – as is

SS


DELTAPROGETTI 4T – anno 2001 Linea di foratura - visto e piaciuto Drilling line – as is Vertical drilling line Max workable mm 1200 x 2200 thickness mm 3-12 n.3 couple of heads washer 1300 with 2 tanks n. 1 couple of blowers thickness mm 3-12


T SERRMAC Trapano monotesta a colonna per ferro – visto e piaciuto Pillar driller for iron one head – as is

Euro 950,00as is

FORNI / FURNACES

EFFECI TP 2542 X 4 MM – year 2006

Forno di tempera – con Garanzia Temperring fornace – with Warranti 2500 x 4200 mm Thickness: 3,8(4) – 19 mm Min. workable diam.: 250 mm Min workable: 175x175 mm

Euro 350.000,00 as is

EX EFCO 650X1400X3MM – year 2000 Forno di tempera – visto e piaciuto Tempering fornace – as is Thickness: from 3 to 19 mm Max. workable : 650x1400mm Min. workable : 100 x 120 mm Power top : 253 kw For float, riflettent, enamelled, serigraphy, worked glass


TAMGLASS HTF 1742 - year 1994 Forno di tempera - visto e piaciuto Tempering furnace - as is Max workable 1700 X 4200 mm Thickness 3-19mm Heating zones n 14 x 2 upper - n. 14 + 4 x 2 lower Heating capacity 1 KW 450 room Heating power 2nd chamber KW 450 Fan power KW 132 + 132 Total installed power KW 1,182.5 Overall length m 27,00 Width up to wall m 5.30

Euro 108.000,00 as is

T TORNATI TL C - year 1996 Forno per fusione– visto e piaciuto fusion furnace - as is Size 1000 X 500 mm

Euro 1.800,00 as is

PUJOL- year 2004 Forno per fusione– visto e piaciuto fusion furnace - as is Size 1000 X 2000 mm

Euro 2.200,00 as is

CENTRI DI LAVORO / CNC WORKCENTRES

BAVELLONI - year 2007 Isola di lavoro - visto e piaciuto Working zone - as is Included: 1-DELTAPROGETTI - Turnable platform for pallets 2- FANUC- 6-axis anthropomorphic robot -Capacity Kg 165 3- Axis Check Center - Verified Axes n. 2 X-Y 4- ALPA 250-4 PF - CNC 4 axles Max work. mm 1220x2520 5- ALPA 250-4 PF - CNC 4 axes Max work mm1220x2520 - 6- DELTAPROGETTI - Motorized conveyor for storage glass 7- TRIULZI - washer h 1600 MM -Thicknesses 2-12 mm 8- DELTAPROGETTI- Automatic palletizer mm 1000 x 2200 9-DELTAPROGETTI - Turnable platform for pallets.


VETROCAMERA / INSULATING GLASS

LINEA SILEMECCANICA LA 2500 – year 1999 Linea per vetrocamera – vista e piaciuta Insulating glass line – as is 6 brushes H 2500 mm


LINEA LISEC J PL – 5V – year 1999 Linea per vetrocamera – vista e piaciuta Insulating glass line – as is 6 brushes Lisec washer : h 1600 mm Panel press Low – E


BOVONE 1600 Lavatrice orizzontale – visto e piaciuto Horizontal washing machine – as is Max lenght 1600 mm

Euro 4.000,00 as is

BOVONE 1600 Lavatrice orizzontale - vista e piaciuta Horizontal washing machine - as is

Euro 3.000,00as is

T GRACO D200- anno 2006 Estrusore a freddo 200 Kg – visto e piaciuto Extruder 200Kg - as is Monocomponent Temperature : 32°- 120° F

Euro 3.300,00 as is

REINHARDT TECHNIK – year 1979 Estrusore bicomponente - visto e piaciuto Extruder bicomponent – as is

Euro 1.000,00 as is

MOVIMENTAZIONE / HANDLING

GAR- SEVE Cavalletto – visto e piaciuto Rack – as is

Euro/each 270,00 as is

T GAR- SEVE Cavalletto – visto e piaciuto Rack – as is

Euro 700,00 as is

T GAR-SEVE Cavalletto – visto e piaciuto Rack – as is

Euro 1.000,00 as is

FANUC R 2000A 65 F- year 2002 Manipolatore / robot – visto e piaciuto Manipulator / robot – as is Capacity 200 Kg

Euro 6.800,00as is

PINZE- VENTOSE / CLAMP - VACUUM

T BOLLA Ventosa manuale – vista e piaciuta Manula vacuum – as is

Euro 100.00 as is

T OFF. COLOMBO P20 - year 1998 Pinza – vista e piaciuta Clamp – as is Capacity 1000 kg

Euro 550,00 as is

T ELEPHANT – year 2017 Pinza 200 Kg Clamp 200 Kg

Spessore: da 0 a 20 mm Lunghezza 500 mm Altezza: 320 mm

Euro 750.00as is

FOREL – year 1990 Scaricapacchi – visto e piaciuto Uploader – as is Jumbo glass

Euro 1.200,00 as is

STAMPA - VERNICIATURA / PRINTING - PAINTING

T CUGHER- PRITEMALS 900 - year 1996 Serigrafia – visto e piaciuto Serigraphic machine – as is Semiautomatic Working area 300 x 900 mm Extratable working plan

Euro 6.700,00 as is

EFI RASTEK T1000 - year2012 Stampante – visto e piaciuto Printer – as is 4+1colour Print area mm 1320 x 2490 Thicknesses mm 50 max Max Resolution 1200 x 600 dpi n. 6 tanks of colors Printing on: aluminum, glass, acrylic, paper, plywood, styrene, pvc, etc Water-based colors


T COMIL/BIESSE STAR 80 – year 1998 Impacchettatrice automatica – visto e piaciuto Automatic packing machine – as is max length packing 80 mm max size machine installed 6.5 mt

Euro 4.800,00 as is

VARIE / VARIOUS

CHEMSERVICE 25/180 - year 2010 Osmosi Inversa – vista e piaciuta Reverse osmosis – as is Pressure : max. 10 bar T° max. : 40°C Power: 220 V

Euro 3.200,00 as is

WINKEL MAMM - year 2010 Filtro pressa – vista e piaciuta Press filter – as is Ricicla 10 m3/h

Euro6.500,00 as Is

T DF – year 2003 Granigliatrice – vista e piaciuta Shotblasting machine – as is

Euro 1.000,00 as Is

T KRISTALL 2000 Moletta per vetri artistici – vista e piaciuta Edger for artistic glass – as is

Euro 150,00 as Is

T APB IP66 - Inverter for modulate the tension

Euro 600,00 as is

T PROXXON Seghetto per blindati – visto e piaciuto Blindovis cutting saw – as is

Euro 250.00 as is

MACCHINE PORTATILI / PORTABLE MACHINES

T DF Tampone portatile – visto e piaciuto Portable polishing – as is

Euro 280.00 as is

T FLEX Sbordatrice portatile – visto e piaciuto Portable arriser – as is

Euro/each 280.00 as is

T Seghetto portatile – visto e piaciuto Portable saw – as is


T FIAM Disco per taglio ad aria portatile – visto e piaciuto Portable cutting air disk – as is


MARTINI EC – 59 Pocketsize EC/TDS/°C/°F meter

Euro 200.00 as is

HELANTEC OXYTESTER

Euro 200,00 as is

GRACE PHONOSORB DELTA T TEST

Euro 200,00 as is

PESOLA KIT Max. 30 gr

Euro 200,00 as is

TEMP 3 JKT TERMOCOUPLE TERMOMETR

Euro 200,00 as is

SIBICAR Muletto – visto e piaciuto Forklift – as is Electric Capacity 16 qli 2226 hours

SS

Euro 2.500,00 as is

T

OM Muletto – visto e piaciuto Forklift – as is Capacity 300 kg

Euro 8.000,00 as is

VW TRASPORTER – anno 2006 Camion – visto e piaciuto Camion – as is 33.000 km

Euro 9.500,00 as is

NEW GLASS PROCESSING MACHINERIES WITH WARRANTY

T OFFICINE BELLUCCI – year 2018 Trapano monotesta – con garanzia Drilling machine one head – with warranty Size: 1000x1000 Motor: 450 watt Recycle pump Inox motor Volt 230 ½ gas

Euro 2.400,00as is

T OFFICINE BELLUCCI – year 2018 Trapano doppia testa- con garanzia Drilling machine double head – with warranty Thickness 3-30 mm Max drill 100 mm Min workable 250 x 100 mm Max workable 2500 x 1200 mm Power 3.7 Kw


N M70– year 2018 Sabbiatricemanuale H 70 - con garanzia Manual sandblasting machine H70 - with warranty

Euro 3.300,00as is

T OFFICINE BELLUCCI – year 2018 Sabbiatrice manuale H 140 - con garanzia Manual sandblasting machine H140 - with warranty Size 2200 x 1300 x H 2100 mm Min workable 200 x 200 mm Power 1.8 Kw 380 Volts Air consumption 800 lt/min Noise less than 85 db (A) Leq

Euro 4.600,00as is

T OFFICINE BELLUCCI – year 2018 Sabbiatrice automatica H1400 - con garanzia Automatic sandblasting machine H1400- with warranty Speed: 3-4 Mt/min Min workable 300 x 300 mm Thickness: 3 – 40 mm Power 3.5 Kw 2 automatic gun + 1 manual Air consumption 1400 Lt/min Size 5300 x 1400 x H 2400 mm

Euro 13.500,00as is

STEFIGLASS – year 2018 Lavatrice verticale – vista e piaciuta Vertical washing machine – as is H 1600 4 brushes Thickness : 3-12 mm


M STEFIGLASS - year 2018 Lavatrice verticale- con garanzia Vertical washer - with warranty H1600 mm 4 brushes Thickness 3-12 mm

Euro 14.800,00as is

OFFICINE BELLUCCI – year 2018 Classificatore manuale – con garanzia Storage pack manul – with warranty 10 positions Openable as a compass

Euro 8.000,00 as is

NEWS 15.03

Documents

Transcript of NEWS 15.03