New Thermally Conductive Polycarbonates for Weight and ...
Transcript of New Thermally Conductive Polycarbonates for Weight and ...
![Page 1: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/1.jpg)
covestro.com
New Thermally Conductive
Polycarbonates for Weight
and Cost Savings in
Automotive Applications
J. Lorenzo, Covestro LLC SPE Automotive Composites Conference & Exhibition, 2018 Novi MI
![Page 2: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/2.jpg)
Automotive LED Applications
2
Requiring Thermal Management
Exterior
Lighting
LED Brake
Light /
CHMSL
Interior Lighting and
Electronic
Components
LED
Headlamps,
DRL,
Signature
Lighting
![Page 3: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/3.jpg)
LED Lighting Applications
3
Relevant Lighting Parts
Lens
Reflectors
Heat-sinks
Housings
![Page 4: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/4.jpg)
Thermally Conductive Polymers
4
Benefits
There are many variations of passages of lorem
ipsum available, but the majority suffered
alteration some form
There are many variations of passages of lorem
ipsum available, but the majority suffered
alteration some form
There are many variations of passages of lorem
ipsum available, but the majority suffered
alteration some form
Thermally conductive polymers offer solutions to
thermal management in LED luminaires, housings
and other electrical and electronic applications
Primarily, they enable…
Weight savings through metal replacement in
heat sink applications
integration of functions and reducing the number
of components & secondary operations
gain high dimensional stability with an
amorphous material
![Page 5: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/5.jpg)
Customized Thermal Conductivity and Electrical Insulation
5
Comparison of the Makrolon® TC Portfolio
* Volume resistivity >E+15 Ωm, Surface resistivity >E+15 Ω Volume and surface resistivity based on IEC 60093, 23°C, 50% r. h.
TC8030 TC611 TC511 TC110 Property
Electrical Properties
UL 94 Flame Class
UL 746B RTI
UL 746C Rating
Thermal
Conductivity
(in-plane )
ASTM
E1461
23°C (W/m•K)
Standard/
Condition/
Unit
Conductive
V-0 @ 2.0
130
f1
14
8 16
1
Electrically conductive grades
offer a high to medium
thermal conductivity with a
black color appearance.
Electrically insulating grades
offer a moderate thermal
conductivity with a white color
appearance and a smooth
surface.
TC8010
8
Density
Vicat Softening
g/cc
(°C)
1.42
148
1.31
130
1.40
130
1.45
145
1.34
136
(mm)
(°C)
16 22 32 45 46 Spiral flow length Internal @ 2mm
(cm)
Insulating*
HB
New New New
Conductive
V-0 @ 2.0
Conductive
V-0 @ 3.0
Injection
molding
Injection
molding
Injection
molding
Injection
molding
Profile
extrusion
Injection
molding
Profile
extrusion
Process Options
![Page 6: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/6.jpg)
Thermally Conductive (TC) Polycarbonate in LED Applications
6
Thermal Conductivity Comparison – Why TC polycarbonate works
LED Temperature vs. Housing Conductivity
![Page 7: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/7.jpg)
Advantages
Less parts
Less assembly steps
Light weight solution
Long-term, reliable heat management
7
New Design Concepts
New Opportunities of Part Integration
Heat sink
+
PCB1)
In-mold
assembly
of PCB1)
+ TIM2) + PCB1)
Al TC611 TC511
1
1) Printed Circuit Board
2) Thermal Interface Material
![Page 8: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/8.jpg)
Advantages as Ex. 1 plus:
1-step process for luminaire housing
Advantages as in Ex. 1-2 plus:
Direct print circuitry
Avoidance of TIM + PCB
8
LED Heat Sink Designs with 2K-Molding
Two-Component-Processing to Reduce Complexity and Cost
Further
integration
by 2k-
molding
Heat sink
+
Functional parts
+ TIM + PCB
+ housing parts Al TC611
TC110
Reflector E.g. +
TC611 TC110
Reflector E.g. +
Apply
electrical
layers
2
3
![Page 9: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/9.jpg)
covestro.com
DESIGN CONSIDERATIONS Advantages of Thermally Conductive Polycarbonate
![Page 10: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/10.jpg)
Design Considerations with Thermally Conductive PC
10
Low to Higher Powered Applications are Achieveable
10W LED Lamp 200W LED Array
High Bay Light
![Page 11: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/11.jpg)
Traditional LED Housing Design with
Aluminum Heatsink
8 Components
Optimized
Polycarbonate Design
6 Components
18% Lower Cost
Design Considerations
11
Part Consolidation and Integration Potential
![Page 12: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/12.jpg)
Thermal Conductivity & Specific Heat
Natural Convection
Coolant & Flow Rate
Emissivity
Design Considerations
12
Heat Transfer Mechanisms
Multi-Physics Simulation using ABAQUS Computational
Fluid Dynamics (CFD)
Conduction
Convection Passive (Natural Conv)
Active (Fan)
Radiation
![Page 13: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/13.jpg)
Design Considerations
13
Cooling Design Elements
Design efficient cooling features
• Optimize Fins
• Eliminate Flow Obstructions
Slice between fins shows slow or stagnant flow
![Page 14: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/14.jpg)
Design Considerations
14
Cooling Design Elements
Cooling Fin Optimization
• Added Fins Improve Thermal Performance
• More fins may not always be better
![Page 15: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/15.jpg)
Design Considerations
15
Influence of Increased Surface Area on Thermal Performance
Original Design
Temp (C)
20% Taller Design
Case Temp = 70.7C
(~3C Cooler)
Temp (C)
Case Temp = 73.3C
![Page 16: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/16.jpg)
Design Considerations
16
Isotropic v. Anisotropic Thermal Conductivity Modeling
Isotropic Thermal Conductivity
Temp (C) Temp (C)
Case Temp = 72.2C
Anisotropic Thermal Conductivity
10:1 Radial-to-”thru-thickness”
Case Temp = 75.7C
~5% difference in case temperature
![Page 17: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/17.jpg)
Design Considerations
17
Orthotropic Thermal Conductivity Modeling
“Directional”
conductivity exported
to thermal simulation
Mold-filling simulation
to predict local
filler orientations
![Page 18: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/18.jpg)
Design Considerations
18
Orthotropic Thermal Conductivity Modeling
Orthotropic Thermal Conductivity
Temp: 105°C Temp: 112.1°C
Temp: 101.8°C Temp: 102.1°C
Isotropic Thermal Conductivity
~7% difference in peak temperature
Negligible
difference
in the
ribs/fins
![Page 19: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/19.jpg)
Extruded Aluminum Heatsink & 3W LED
57.7°C Temp
30g Mass
Optimized Makrolon Design
58.1°C Temp
19g Mass
35% Weight Savings
Benefits of Thermally Conductive Polycarbonate
19
Significant Weight Savings at near-Equivalent Perfornance
Extruded Aluminum Heatsink & 3W LED
57.7°C Temp
30g Mass
Optimized Polycarbonate
Design
58.1°C Temp
19g Mass
35% Weight Savings
![Page 20: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/20.jpg)
covestro.com
PROCESSING & JOINING
WITH MAKROLON® TC Thermally Conductive Polycarbonate
![Page 21: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/21.jpg)
General Design Topics for TC Polycarbonate
21
Wall Thickness & Rib Thickness
• Nominal thickness of 2.5 mm to 4mm is preferred
• Thicker than standard wall sections may be possible
Thermally Conductive PC 66% Up to 100%
Could potentially be 1:1 for ease of filling
![Page 22: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/22.jpg)
Joining of TC Polycarbonate
22
Bonding Techniques
Thermal Techniques
Ultrasonic Welding
Hot Plate Welding
Mechanical or Chemical Bonding
Threaded Fasteners
Adhesive Bonding
Snap Fits
Joining Technique AcceptableAdhesive Bonding Yes
Threaded Fasteners Possibly*
Snap Fits Yes**
Hot Plate Welding No
Ultrasonic Welding No
**Female half only in Makrolon TC polymer
* Limited torque, may require two shot or threaded inserts
![Page 23: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/23.jpg)
Joining of TC Polycarbonate
23
Thread Fasteners
• Stripping torque limits the use of threaded
fasteners
• The fastener should pass through the TC material
and anchor into a suitable material
• Threaded inserts or helical thread inserts can
improve torque/pull out performance
![Page 24: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/24.jpg)
1
Joining of TC Polycarbonate
24
Adhesive Performance
• Good adhesion strength with common adhesives
o Performance varies depending on the adhesive chemistry
• Adhesive testing available on request
Adhesive Bonding Study with 3M Scotch-Weld1 DP100 Plus
1 Scotch-Weld is a registered trademark of 3M Company 2 Dow Corning is a registered trademark of Dow Corning Corp.
Adhesive Bonding Study with Dow Corning2 7091 (Silicone)
![Page 25: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/25.jpg)
Paint has neglible influence on thermal performance
Designing for TC Polycarbonate
25
Painting & Decorating
Successfully tested
processes:
• Powder coating
• Solvent borne
• Water borne
• UV cure
![Page 26: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/26.jpg)
Processing for TC Polycarbonate
26
Ejection
Stripper Plate
2° Draft
Ample ejectors (sleeve, blade or
stripper plates) on fins/ribs
Locate tall or deep features on the
ejector side of the tool
Draw polish in the direction of part
ejection
Easy release coatings on the steel
to facilitate part release
![Page 27: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/27.jpg)
Processing for TC Polycarbonate
27
Mold Cooling
Excessive mold temperature
can cause sticking
Position cooling lines to provide
uniform mold temperatures
Highly conductive mold materials (ie
beryllium) are suggested (rib area)
Conductive inserts must provide a
thermal path to cooling lines
![Page 28: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/28.jpg)
Processing for TC Polycarbonate
28
Gate and Runner Systems
Tunnel-Gate Configuration
Three Plate
Mold
Three plate molds, edge gates, sub-gates and
direct drop hot manifolds are all acceptable
Sprue tip orifice diameters should be 0.8-1.0
times the wall thickness
Sub-gates should be 3 mm minimum
diameter, avoid cashew gates
Edge gates should be a ratio of 0.8-1.0
times the wall thickness
Manifold and runner systems should follow standard
design practice for polycarbonate materials
![Page 29: New Thermally Conductive Polycarbonates for Weight and ...](https://reader034.fdocuments.us/reader034/viewer/2022051307/6279e26c891a380a134c1842/html5/thumbnails/29.jpg)
covestro.com
Thank You Jim Lorenzo, Terry Davis Covestro LLC
Makrolon is a registered trademark of the Covestro group
29
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production
evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and
information to determine to your own satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This application-specific
analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us.
Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical
assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from
all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein
is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use.
No license is implied or in fact granted under the claims of any patent.