NEW SX-200HIGH PRECISION AND HIGH CAPACITY

MICRO EROSION MACHINE

IF YOU NEED THIS TOP

PERFORMANCE WITH REDUCED

MACHINING TIMES, WITHOUT

MATERIAL ALTERATION, CALL SARIX

OR VISIT US

@WWW.SARIX.COM

SARIX SA6616 LOSONESWITZERLAND

TEL. +41 91 785 81 71FAX +41 91 785 81 77

www.sarix.com

PERFECT ROUND HOLES.CONCENTRIC &

ACCURATE HOLES.HOLE TAPER CONTROLLED.

NO ANGLE LIMIT.NO BURNING EFFECT.

NO MATERIAL ALTERATION.WITHOUT ENTRANCE AND

EXIT DEFORMATION.HIGH PRODUCTIVITY QUALITY.

HIGH QUALITY SURFACE.HIGH PRECISION FINISHING.

AUTOMOTIVE

TEXTILE

MICRO MOLDS

MICRO MECANICS

AEROSPACE

MEDICAL

MICRO ELECTRONIC

● The capacity of the NEW SX-200 machinebrings the Micro EDM Technology to largerwork pieces.

● NEW the multi-axis CNC allows the index-ing of complex work pieces where the per-formance of the Micro-EDM-Machining isneeded.

● NEW “High production capabilityconcept” through an efficient Multi-functions Micro-Machining machine with;slide W-axis (Z2), C-indexing spindle, A/B positioning indexing axis and multiple hole sequence process….

● NEW SX-MMI, ”On-board”, easy and user friendly unlimited programming andediting software.

● The high performance SARIX Micro PulseEDM generator MPS, with its associatedTechnology opens up new opportunities

for smaller, deeper and more precise perfect holes.

● Micro EDMing machining technology withsolid and tube electrode from 45 micronsto 3.0 mm.

● Micro Holes, high Precision Micro holesand shape holes down to 20 microns

● High surface finishing capability down toRa 0.1 and Ra 0.05 with the Micro FinePulse Shape Generator MFPS.

● High precision positioning accuracy up to±1 micron.

● Automatic axis positioning control withdepth control.

● NEW High precision Automatic electroderefeeding spindle with dielectric or airclamping control for continuous production.

● High Speed Micro EDM drilling Technolo-gy with breakthrough-detection device.

SX-200-HPM

MPSMicro Pulse Shape Generator

SX-CU

SARIX SA • CH - 6616 LOSONE • TEL. +41 91 785 8171 • FAX +41 91 785 8177 • www.sarix.com • e-mail: info@sarix.com

TECHNICAL SPECIFICATIONS TYPICAL CONFIGURATION Machine SX-200

HPM

Type High Precision

Work table size 700 x 300 mm

Travel X axis 350 mm

Travel Y axis 200 mm

Travel Z axis 200 mm

Travel W (Z2)* axis 150 mm

Z axis feed rate: max 450 mm/min

X/Y axis speed rate: max 600 mm/min

Precision of positioning ±2 µm

Resolution 0.1 µm

Adjustable workheadpositioning 50/100/150 mm

Work piece weight ~50 kg

Net weight ~450 kg

Dimensions 900 x 820 x 950 mm

SX-MPS SX-HPS Generator: MICRO PULSE SHAPE HIGH PULSE SHAPE

Freerun voltage 60 ÷ 255 V fixed voltage

Frequency 1÷250 pos. 1÷100 pos.

Current pulse 1÷200 pos. 1÷200 pos.

Dimensions 135 x 110 x 500 mm

Control Unit SX-CU

Power supply 230 V / 50 Hz

Nominal power connection 650 VA

Dimensions 450 x 400 x 690 mm

Dielectric Unit SX-DA

Capacity 25 l

Dielectric deionised water or oil

Dimensions 500 x 750 x 620 mm

Our specifications are subject to any change, givingyou a continous technological advantage

● SX-200-HPM machine including SX-MPS, Micro Pulse Shape Generator● NEW SX-CU, CNC Control UNIT ● SX-PL, Multi-axis-erosion software X-Y-Z● SX-ICON, Software Icon Editor● SX-DA, Dielectric unit with conductivity and/or temperature control for mass

production (for deionised water or dielectric oil)● SX-RHP, High Precision Rotation axis with 3R Macro chuck● SX-PG, Precision Guide holder● SX-HP, High pressure flushing unit 70 bars

NEW SX-CU CNC CONTROL UNIT ● Unlimited program capacity; number, length and calls ● Free and unlimited technology settings● SX-MMI, “On board” friendly user editing and programming capability● NEW SX-EAC, “Enhanced Automatic Configuration” System● High quality 8.4” TFT color display, 3.5” floppy disc driver, 1.44 MB● Virtually up to 16 axis CNC control● Standard X,Y,Z and rotation speed axis control (W,A,B,C…optional)

● SX-MFPS, Micro Fine Pulse Shape generator for Micro-Shape-holes with ultra-fine finishing

● SX-HPS, High Power Pulse Shape generator for higher stock removal● NEW SX-A320 & SX-A340, High precision Automatic Electrode refeeding

spindle, (also available with high pressure flushing unit for deionised water ordielectric Oil)

● SP 06 & SP 08, Automatic refeeding collet down to 45 Microns● NEW SX-C-RHP, High Precision Rotating and indexing C axis● NEW SX-W, CNC Programmable W-backslide axis (Z2)● SX-CC, “CriCri”, Electrode wear compensation system for shape electrode● NEW SX-TH, “Tilting Head” device for SX-A340 Rotating spindle with the

SP08 collet type● SX-DNC, Sequencer software for unlimited programmable number of holes● SX-AB100C, High precision single or double indexable and programmable

A/B-axis, designed for submerged conditions● SX-ST200 & ST300, collapsible tank for submerged conditions● SX-Wdress020, Wire Dress Unit to produce Micro-Electrode for Micro Holes

and shape holes down to 20 Microns● NEW SX-EAD, Electrode Automatic Distributor device

OPTIONS

ACCESSORIES● SP01, High precision collet with centering device● SP02, High precision collet● SG01, High precision ceramic guide● High precision collet down to 45 Microns● High precision solid carbide tubes● Brass & Copper single holes and coreless electrodes tubes● Tooling, fixtures, horizontal microscope, instruments, filters…● Special shaped and complex form according your drawing…

* Option

In the regionwhere

avant-gardetechnologyhas made

EDMhistory.

SARIX F-SX-200e - 05