new product - TransNet NZ Ltd Juice/LV_Juice... · #tn-054701 as/nzs 61241.1, as1939: check out the...
Transcript of new product - TransNet NZ Ltd Juice/LV_Juice... · #tn-054701 as/nzs 61241.1, as1939: check out the...
FREEWHILE STOCKS LAST
SUMMER CAP
This Month
ww
w.tr
ansn
et.c
o.n
z
When you spend over $500 (excl GST) on one invoice this month
LV JUICE
Feb
ruar
y 20
17
CAT NO. Power (W)
Lumens (lm)
IP Rating
Battery Included Charger
LEDPORT-20W-BATT 20 1600 IP54 Yes 12V DC/230V ACLEDPORT-50W-BATT 50 3500 IP54 Yes 12V DC/230V ACLEDPORT-MAGBASE Magnetic base
portable led floodlight with bluetooth speaker
new product
featuresBluetooth connection function to play music
USB outlet to charge other devices
4-5 hour battery run time
100% & 50% light level settings
Rechargeable Li-ion battery
Slim & compact design for ease of storage
12V DC & 230V AC charger
IDEAL FOR:Lighting small spaces - ceiling cavities, under buildings
Heat sensitive situations - LEDs are cool running
Places where the light direction is moved often
Areas with no mains power supply
ECOLIGHT
Optional magnetic base
#LEDPORT-MAGBASE clips onto the
light
FREE SPORTS BAG WITH TAPE PACK
PAGE 2
EX RATED HAZARDOUS AREA LUMINAIRES
PAGE 6
CATCH THE FIRETHERM TRAILER DISPLAY
PAGE 8
All Specials and Products featured in TRANSNET JUICE are avai lable from al l good electr ical wholesalers .
ELECTRICALCABLE BELOW
ELECTRICALCABLE BELOW
ELECTRICALCABLE BELOW
DANGER KEEP OUT DANGER KEEP OUT
TAPE FOR ALL APPLICATIONS
COMPLETE TAPE PACK WITH FREE SPORTS BAG
WARNING STRIP - MADE IN NZ
Warning strip is designed to offer secondary protection for underground utility cables and pipes, laid in the ground above the cable after the trench has been partially backfilled. It can also be used to cordon off hazardous areas. Our warning strip is made in New Zealand from recycled materials – durable yet lightweight, this warning strip can stand up to the elements.
KEY FEATURES
• Orange with black text signifies “ELECTRICAL CABLE BELOW”
• White with red text signifies a warning of hazardous area “DANGER KEEP OUT”
• Made from recycled Polyethylene• Operating temperature -20°C to 120°C• Manufactured to the AS/NZ4275.5:
1995 standard
Cat No. DescriptionBTDT100M DANGER KEEP OUT WARNING STRIP 100MBTOE100MT ELECTRICAL WARNING STRIP 100MBTOE300MT ELECTRICAL WARNING STRIP 300MBTOE500MT ELECTRICAL WARNING STRIP 500M
Bags are available while stocks last. Only PVC/Insulation tape is Raychem branded.
5 x Raychem PVC Insulation
Tape 10 Pack
1 x TransNet PVC Duct Tape
1 x Self Amalgamating Butyl Rubber Tape
1 x Double-Sided Tape 18mm x 10m
1 x Hook & Loop 12mm x 25m
$119.00+gst
plus freetransnet
sports bag
cat no. #tntapepromo
All Specials and Products featured in TRANSNET JUICE are avai lable from al l good electr ical wholesalers .
RAYCHEM LV JOINTING ACCESSORIES
CRSM HEATSHRINKABLE WRAP-AROUND REPAIR SLEEVE
BOCL BRANCH OFF CLIPBOCL adhesive branch off clips provide greater reliability of seal between two cables.
APPLICATIONS• Sealing at point of cable
break out• Provides
environmental seal via heat activated adhesives
• Clip body holds outer sheath in place while adhesive is
• melted and bonds
• Available in two sizes
Cat No. Size Dimensions L x W x D (mm)BOCL-20-1638C0NZ SMALL 109 X 60 X 12BOCL-20-1068C004 LARGE 65 X 28 X 10
CRSM wrap-arounds are a fast and permanent cable repair and sealing system. The repair sleeve is quickly fitted in place by means of its rail and channel closure. This labour-saving installation fits and seals all in one step. CRSM wrap-arounds are abrasion and corrosion resistant, and each size covers a range of cable sizes.
Raychem’s distinctive closure system, which incorporates a stainless steel channel slid over rails on the sleeve, keeps the wrap-around in place during installation but can be easily removed when the adhesive has set.
FIND OUT MORE ABOUT CRSM ON YOUTUBE
APPLICATIONS• Repair cable sheath
damage without cutting cable
• Underground joint sheath reinstatement (& in tight areas)
• Sealing cable glands
TECHNICAL DATA• Operating
temperature range -40°C to 120°C
• Shrink ratio 3:1• Sealant lined• Halogen free• Abrasion, corrosion
& decay resistant• IP68• 100% waterproof• Inner adhesive wall• UV resistant• Voltage class 1kVRANGE COVERS FROM 11MM UP TO 150MM
AVAILABLE IN 300, 500 & 1500MM LENGTHS
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
WHY CHOOSE RAYCHEM?
PLUS
In an industry where connections really do count, we want ours to be as simple and effective as possible. Our Raychem Heatshrink and Utilux Connectors have been designed to work together seamlessly, with traceability from the sourcing of raw materials right through to the finished products. TE does all their own R&D and manufactures to their exacting standards using their own parts, so they know how to make the products you rely on the perfect fit.
RAYCHEM HEATSHRINK• Resistant to abrasion,
weathering & atmospheric pollution
• Made from high quality cross-linked polyolefin
UTILUX CONNECTORS• Shearhead bolts for correct
connection every time• No special tools required• Al, Cu & Bimetallic
connections• Range taking
PROUD SUPPORTERS OF
YOU DON’T CHANGE A WINNING COMBINATION
All Specials and Products featured in TRANSNET JUICE are avai lable from al l good electr ical wholesalers .
SPECIALISED LV MECHANICAL CONNECTORS BY UTILUX
LV BIMETAL MECHANICAL LUGS
BLMT-400-FLEX
• Easy and secure connection system for Aluminum flexible cables tested to IEC-61238-1 Class A
• New patented two step shear off bolts provide pre-determined torque & ensure reliable and secure contact without damaging fine Aluminum strands
• Easier and faster installation without application tooling and reduced number of bolts
• To be available for cable cross sections 70 mm² through 500 mm²
• Dual range connectors available for connecting Cu – Al and Al – Al combinations for class 5 & class 2 conductors
TE Connectivity’s BSMB and BLMT-FLEX mechanical connectors and lugs are designed for use in low and medium voltage applications up to 42
kV, and consist of a special high tensile aluminium tin-plated body and shear-head bolts. Suitable for outdoor and indoor applications.
Cat No.Cross Sectional Range (mm²) Contact Bolts Quantity Head Size AF (mm)
Class 2 Conductors
Class 5 Flexible Conductors Side 1 Side 2 Side 1 Side 2
BSMB-150/400-400-FLEX 150/400 300/400 3 4 13 17
Cat No. Cross Sectional Range (mm²) Palm Hole Diameter (mm) LB
Contact Bolts Quantity
Head Size AF (mm)Class 5 Conductors
BLMT-400 FLEX-15 300/400 15 4 17BLMT-400 FLEX-17 300/400 17 4 17BLMT-400 FLEX-21 300/400 21 4 17
VCXI lugs consist of an aluminium barrel linked
to a copper palm by friction welding technology. The
aluminium barrel is provided with a shear
head bolt controlling the tightening torque.
APPLICATIONSUsed for connection of aluminium
or copper industrial conductor
For indoor application only
LV connection on busbar inside electrical panel and on compact type circuit breaker
(new generation)
• Accepts aluminium and copper cables
• Copper palm compatible with the palms of the apparatus to be connected
• Only 5 lugs will connect from 25 to 500mm²
• Can be fitted into the new generation of compact type circuit breakers
• Inner surface of aluminium barrel is grooved at the manufacturing stage and greased to ensure a good electrical contact with wires to be joined
• Tightening torque controlled by shear head system
• No specific tool needed• Only one bolt to tighten
FEAT
URES
& B
ENEF
ITS
FEAT
URES
& B
ENEF
ITS
Cat No. Cross Section Range (mm²) Stud Size LBAluminium Copper
VCXI-11-M6 25-70 25-50 M6VCXI-14-M10 50-120 50-95 M10VCXI-18-M10 95-185 95-120 M10VCXI-29-M16 150-300 150-185 M12VCXI-22-M12 240-500 240 M16
All Specials and Products featured in TRANSNET JUICE are avai lable from al l good electr ical wholesalers .
EX RATED HAZARDOUS AREA PRODUCTS
CCG EX CORROSION GUARD FOR MULTI ARMOURED GLANDS
SPARTAN LINEAR 2' & 4' LUMINAIRES WITH BLANK END CAP
FEATURES• For use in highly corrosive and wet areas• Cable gland is precision manufactured from
high quality Brass (Nickel plated)• Factory fitted captive elastomeric seals for
built in safety• The screw-on Corrosion Guard™ is
manufactured from non-corrosive material to protect the armour and metal parts of the gland
• Corrosion Guard™ screws onto the gland body and seals over the outer sheath of the cable giving an IP68 and deluge proof seal
• Complete with polypropylene sealing gasket and an end cap/safety gauge for correct gland selection
TECHNICAL DATAGLAND MATERIAL: Brass (Nickel Plated) CORROSION GUARD MATERIAL: Glass Reinforced Polyester Compound/PBT SEAL MATERIAL: Thermoplastic Elastomer CABLE TYPE: Steel Wire, Braid, Tape Armour ARMOUR CLAMPING: Multi Armour Cone and Cone Ring SEALING AREA: Inner and outer sheath and total enclosure of gland INGRESS PROTECTION: IP66/68 OPERATING TEMPERATURE: -30°C to 80°C HAZARDOUS AREA CLASSIFICATION:
SANS IEC, AS/NZS IEC, CNEx: Zone1, 2, 21 and 22 Ex de IIC DIP A21ATEX: Category 2, Category 3, Ex de II 2 GD
STANDARDS: Aus/NZ/IEC: ANZEx 03.4083X, AS/NZS 60079-0, AS/NZS 60079-1, AS/NZS 60079-7, AS/NZS 61241.1, AS1939#T
N-05
4701
CHECK OUT THE EX CORROSION
GUARD INSTALLATION
VIDEO ON YOUTUBE
We now offer our WL84 (2') & WL168 (4') Linear luminaires with a blank end cap, designed as a cost effective solution for loop in loop out applications. Aside from the single end cap, the luminaire will have all of the unique features of the standard luminaire, while being able to offer a saving on the initual purchase price.
The SPARTAN Linear range is designed specifically for use in new hazardous area installations or to retrofit existing fluorescent installations which require high performance, reliable, White-Light illumination. Housed in Marine Grade aluminium and using Raytec’s field-proven, long-life LED technology, SPARTAN Linear is ATEX and IEC Ex approved for all Zone 1 & 2 applications and rated for T4, T5 and T6 environments.
Key FeaturesATEX & IEC Ex approved - Zone 1 & 2 (UL/CSA pending, including C1D2)
Emergency variants available UK designed and manufacturedEasy installation, maintenance & inspectionWide operating temperature range of -40° to +60°C RetrofitableUltra long life LEDHigh Lumen outputAvailable as portable unit Five year warranty
Five year warranty
UK designed & manufactured
Emergency variants
available
ATEX & IEC Ex approved - Zone 1 & 2 (UL/CSA pending,
including C1D2)
www.transnet.co.nzPh 0800 442 182 +64 9 274 3340
BETTERMI2885
BEST
MI2892
GOODMI2883CLASS S CLASS S CLASS A
Current Inputs 4 4 4Voltage Inputs 3 4 4
Flexible Current Clamps 3 4 4
AC + DC Voltage ✓ ✓ ✓AC + DC Current ✓ ✓ ✓
Frequency, Power, Energy, Harmonics,
Interharmonics, Phase Diagram, Scope Mode
✓ ✓ ✓
Neutral Current OPTIONAL ✓ ✓Temperature OPTIONAL OPTIONAL ✓
General Recorder on Time Interval, Alarm or
Event✓ ✓ ✓
Waveform Recorder on Time Interval, Alarm or
Event X ✓ ✓
Transient Recorder (Sample Rate >50kHz) on U/I Level or Envelope
X X ✓
GPS X OPTIONAL OPTIONALLAN X ✓ ✓
3G Modem X OPTIONAL OPTIONAL8GB MicroSD Card (Compatible up to
32GB)✓ ✓ ✓
PowerView3 PC Software ✓ ✓ ✓
The MI28xx range of power quality analysers is designed for long term recording as well as for troubleshooting power quality problems in three-phase and single-phase power distribution systems. The recorders automatically record all important data and waveforms of voltage events like Dips and Swells, and the user can set 7 optional triggers for capturing waveforms of selected quantities.An easy-to-read graphical colour display enabling the user to detect harmonics, phasors and waveforms anomalies in the installation simply by connecting the device, while handy Quick Set buttons allow faster data overview.Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long term records and automatic creation of professional test reports.
FEATURES
MI2883 | MI2885 | MI2892
6 x AA Rechargeable batteries, Cat III/1000V, Cat IV/600V
METREL THREE PHASE POWER QUALITY ANALYSERS
TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.
TransNet New Zealand Ltd
Auckland78 Cryers RoadEast TamakiAucklandNEW ZEALAND Ph 0800 442 182 Fax 0800 442 183PO Box 39 383 Howick, Auckland
Wellington18 Sydney StreetPetoneWellingtonNEW ZEALAND Ph 04 576 2530Fax 04 576 0040PO Box 39 383 Howick, Auckland
NEW ZEALAND
TransNet Tonga
Ma’ufangaSmall IndustriesMa’ufangaTONGA Ph +67 627 939Fax +67 627 976 PO Box 2932Nukualofa
TONGA
ALL FIRED UP & READY TO GO2017 TransNet Trailer Tour Begins
catch
our new firetherm display while you can!
1-10 Feb
Waikato/Tauranga
13-15 feb
New Plymouth
16-17 feb
Napier/Hastings
20-24 feb
Wellington
27 Feb - 3 Mar
Nelson
6-18 mar
Christchurch
MTTT