NEW PRODUCT BULLETIN - Clipsalupdates.clipsal.com/ClipsalOnline/Files/Brochures/G0000122.pdf ·...
Transcript of NEW PRODUCT BULLETIN - Clipsalupdates.clipsal.com/ClipsalOnline/Files/Brochures/G0000122.pdf ·...
NEW PRODUCT BULLETIN
NOVEMBER 2012
56 Series™ Plug and Socket ConnectorsNEW
Scalable and flexible soft wiring
CABLE MANAGEMENT
A new mounting solution
C-BUS 360º SURFACE-MOUNT
DETECTORS
Smarter LED downlights
LED LIGHTING
Smooth, flicker-free dimming
DIMMERSACCESSORIES
Your contemporary modular solution
2
Hello and welcome to the latest edition of Clipsal’s New Product Bulletin – showcasing the latest product offerings and electrical solutions for your customers. Clipsal has an ongoing commitment to electrical contractors like yourself, to provide innovative products that lead market trends and add value to your business.
It's a very exciting time to be an electrical contractor, with new technology readily available and large government initiatives to drive business in both the residential and commercial sectors, such as the NBN rollout and the Renewable Energy Scheme.
The skyrocketing cost of electricity has lead to energy efficiency becoming the most talked about solution for your customers' homes. You've probably even seen an increase in customer inquiries regarding energy-efficient lighting, energy monitoring and solar inverters to help reduce their electricity bills. With accredited training and Clipsal's energy efficiency product range, you could easily position yourself as an energy efficiency expert. Simply talk to your Clipsal Rep about what options are available.
Your customers expect you to deliver advice on everything from architectural switch plates and dimmers, to Infrascan Motion Sensors, dimmable LEDs, data cabling, solar solutions and energy monitoring devices. You are clearly more than a tradesman; you’re an electrical consultant, a salesperson, a technician and an engineer. So, keeping that in mind, Clipsal's job is to make your job easier — to help you deliver reliable electrical solutions, on time and within budget.
As you flick through the New Product Bulletin, you’ll see that every product featured is designed to make your next installation even easier than the time before. And with all the new technological developments, you’ll also see ample opportunity to upsell to your customers so they are well prepared for the future.
In particular, you'll see that Clipsal's energy-efficient Sunset Switches, 8W LED downlights and GT Inverters, along with the Ecomind Electricity Monitors, will save your customers money in the long run. All of these products, and more, can be downloaded straight to your desktop in Clipsal’s eCatalogue. Or you can download the iCat app for smartphones – suitable for Apple iOS and Android. With "on the spot" quotes from your smartphone, it has never been easier to turn jobs around!
Finally, I would like to mention Clipsal's Don't Risk It! campaign. Non-compliant product awareness is essential, as these products have the potential to put your customers in harm's way, and cause irreparable damage to their homes and your business. Please continue to support the brands that support the electrical industry. I invite you to visit Clipsal's manufacturing site at Gepps Cross, where you will see core products being made locally and how they are tested to meet Australian Standards.
On behalf of everyone at Clipsal by Schneider Electric, I’d like to thank you for your ongoing support and I look forward to seeing you soon.
What an exciting time to be an electrical contractor!
Grantley White
Sales Director Clipsal & Schneider Electric Partner Business
3
Strato 8000 Series™
Your contemporary modular solutionCatalogue Numbers
REFER TO STRATO BROCHURE
Catalogue Numbers
REFER TO MODENA BROCHURE
Product Features
M8082LHA-WE
S8083LHA-WE
Modena 8000 Series™
Your complete modular solutionProduct Features Whether it’s for a new dream home, or you're renovating and creating
the perfect living space, the job won’t be finished until you include the timeless and sophisticated Clipsal Modena 8000 Series. The large, soft-resistance switch mechanism provides easier operation and practical functionality for all users. The range of finishes, colours and configurations suit any décor and will complement any residential or commercial environment.
Over 200 custom configurations
Compatible with 30 Mech products
Curved plate design
Blue LED indicator lights as standard
Seven interchangeable colour surrounds
The Clipsal Strato 8000 Series Switch range provides the flexibility of modular design, with all the benefits the Australian contractor has come to expect. With a large range of pre-configured standard installation products available, large terminals, 84mm mounting centres and a colour pallet inspired by Laminex®, this range is designed for the Australian market.
Over 200 custom configurations
Compatible with 30 Mech products
Flat plate design
Blue LED indicator lights as standard
10 standard Laminex interchangeable colour surrounds
Optional Laminex custom colour selection
4
Impressive 250V a.c. 20A/16AX capacity
Suitable for fluorescent loads up to 16AX
Compatible with all 30 Series apertures
Suitable for new-build and retrofit projects
Terminals can accommodate 3 x 2.5mm2 conductors
One-way/two-way switching facility with looping terminal
Also available as a bell-press mechanism
Product Features Clipsal revolutionised the electro-mechanical switch by introducing push-button mechanisms to the market. The offer was enhanced with the release of fully assembled Impress Switches in the stylish Slimline and Eclipse models.
Today, your customers have even more choice, as Clipsal has expanded its innovative Impress offer to include fully assembled 2000 Series and Classic C2000 Series Switches.
With a built-in Clipsal Integrally Switched Universal Dimmer now part of the Impress range, your customers will have complete lighting control, all from the push of a button.
Impress™ Push-ButtonSwitches & DimmersFully assembled 2000 Series™ and Classic C2000 Series™
2031VAPBL C2031VAPBL
415VF-WE
Auto-switched socket for automatic cut-off when plug is removed
New larger terminals accommodating up to 3 x 2.5mm2 wires
New flap design with flat face to provide a slimmer and sleek finish
Thicker gasket and new 20mm spacer for better installation on uneven surfaces
Coloured terminals for easier identification
Rear clip-on cable shroud for added terminal protection
Product Features Following caravan owners and manufacturers' advice, Clipsal has developed a new design for the Clipsal 415VF Caravan Socket Outlets.
Available in: • 10 amp, 415VF-WE (White) or 415VF-BK (Black) • 15 amp, 415VF15-WE (White).
415VF Caravan Socket OutletDon't be left out in the dark
Catalogue Numbers
415VF-WE Auto-Switched Caravan Socket Outlet IP34 10A White
415VF-BK Auto-Switched Caravan Socket Outlet IP34 10A Black
415VF15-WE Auto-Switched Caravan Socket Outlet IP34 15A White
415VFSM20-WE Deep Mounting Block 20mm White
Blue LED indicator option configurable to user requirements: • LED permanently ON • LED ON, switch OFF • LED ON, switch ON • LED ON, switch OFF (power available)
5
Electricity Monitor Display
Weatherproof robust housings (IP56 and IP66 ratings)
2-wire and 3-wire designs
10AX resistive and fluorescent load current
Robust and reliable construction
Default timer and lux level settings with variable adjustment options
Easy to install
Product Features Sunset Switches are a reliable and convenient light switching solution that will provide your customers with considerable energy savings, as lighting is never left on longer than required.
Clipsal Sunset Switches come in 2-wire and 3-wire designs, making them ideal for every commercial, residential and industrial application. The Sunset Switches feature a convenient dusk to dawn setting, ensuring easy installation set-up. Lighting will be activated at dusk and switched off at dawn. For increased energy efficiency, an inbuilt timer adjustment allows lighting to be activated for a preset time (2h, 4h, 6h, 8h). The lux level adjustment option allows flexibility regarding the mounting location. WS226SSR Series Sunset Switches are compatible with most pre-existing back boxes.
Weatherproof Sunset SwitchesSee the light in saving energy
WS226SSR/2-RG
Display electricity usage in dollars ($), kilowatt (kWh) and carbon tonnes (KgCO2)
Monitor hourly, daily, weekly, monthly and average data
Available with a battery or mains-powered transmitter
Additional CT sensors available for three-phase installations
Product Features (Display, Transmitter, CT Sensors)
MONITOR electricity consumption REDUCE energy use SAVE money on electricity bills
Ecomind Electricity MonitorSave up to 10% on electricity bills
Catalogue Numbers
EM422EM-E-KMTS Kit with mains-powered transmitter
EM422EM-E-KBTS Kit with battery-powered transmitter
Catalogue Numbers
WS226SSR/2-RG Weathershield, 2-Wire design
WS226SSR/3-RG Weathershield, 3-Wire design
56SSR/2-GY 56 Series, 2-Wire design
56SSR/3-GY 56 Series, 3-Wire design
31VSSR/2-WE Standard Series, 2-Wire design
31VSSR/3-WE Standard Series, 3-Wire design
31VSSR/2-WE56SSR/3-GY
Display electricity usage graphically
Create electricity reports
Set and track electricity targets
Manage/plan demand
View electricity consumption summaries/predictions
Create notes to explain peak or low electricity usage
Product Features (Electricity Monitoring Software)
Timer, Lux level setup
EM422S-12C90A Additional 90A CT-Sensor
EM422S-16C120A Additional 120A CT-Sensor
6
Designed to reduce visual clutter on the wall, the new integrally switched push-button and rotary controlled universal dimmers incorporate on/off switching and dimming control into one mechanism.
The dimming performance has been optimised to ensure smooth, linear, flicker-free dimming across the control range.
The new Clipsal Dimmers offer considerable flexibility. They can be used to control loads such as incandescent lamps, dichroic lamps and low voltage lighting that uses iron-core or electronic transformers, as well as selected dimmable LED and CFL lamps.
The integrally switched push-button and rotary controlled universal dimmers set new industry standards for control and reducing the space required in a wall plate. For further information on compatibilty, please visit clipsal.com/load
Push-Button and Rotary Controlled Universal Dimmer
Push-button or rotary controlled operation
Clipsal Universal Dimming Technology
350W power rating
Linear control across dimming range
Full short circuit protection
Wide range of plate styles and colours available
Suitable for new or retrofit applications
Inbuilt over-current and over-temperature protection
Immune to high frequency (ripple) signal injection on mains supply
Product Features
Space saving dimming controls
Push-Button Universal Dimmer Catalogue Numbers
Rotary Controlled Universal Dimmer Catalogue Numbers
C2031E2RUD-WE
4061E2PUDN-PW2031E2PUD-WEC2031E2PUD-WE
4061E2RUD-PW2031E2RUD-PW
31E2PUDM30 Series Mechanism
4061E2PUDMSaturn Mechanism
2031E2PUD2000 Series
C2031E2PUDClassic Series
SC2031E2PUDSlimline Series
SL2031E2PUDEclipse Series
4061E2PUDNSaturn Series
31E2RUDM30 Series Mechanism
P2031E2RUDMPrestige Mechanism
4061E2RUDMSaturn Mechanism
31E2RUDStandard Range
2031E2RUD2000 Series
C2031E2RUDClassic Series
SC2031E2RUDSlimline Series
SL2031E2RUDEclipse Series
P2031E2RUDPrestige Series
4061E2RUDSaturn Series
7
O.Erre Industrial Fans
The O.Erre range of industrial fans has been improved for better performance.
These fans can now achieve 10%-30% improved performance, depending on the model, and have an improved IP rating to ensure safe installation in all environments.
All models include long-life ball bearing motors.
Product Features
Safety protection grille
Steel body and grille protected by an epoxy-based anticorrosive paint
Nylon impeller for high performance
Catalogue Numbers
MD254M Fan W/Plate IP55 250mm S/Phase
MD304M Fan W/Plate IP55 300mm S/Phase
MD404M Fan W/Plate IP55 400mm S/Phase
MD504M Fan W/Plate IP55 515mm S/Phase
TT254M Fan W/Plate IP44 250mm S/Phase
TT304M Fan W/Plate IP55 300mm S/Phase
TT404M Fan W/Plate IP55 400mm S/Phase
Updated and improved
MD254M TT254M
Slimline® Xtra Switch
The wait is over. Clipsal has responded to contractors' demands for a Slimline double power point, which has the ability to add any switch from its 30 Mech Series.
Introducing the SC2025XA, with a removable extra switch that enables the installer the flexibility to install the right 30 Mech for the job.
Now Slimline has the flexibility that Clipsal's other ranges have had for years.
Catalogue Numbers
SC2025XA Double socket with extra removable switch
Removable 30 Mech Version
SC2025XA
8
Deep Plastic Wall Box
Electrical accessories should be easy to install, however, some of the new smart products have deep terminal blocks and take up valuable wall box space. Products such as Saturn, dimmers, timers and Cat. 7A are space hungry. With this in mind, Clipsal has designed the extra deep plastic wall box- the 157/1PRMD.
Deep wall box for more wiring space
Product Features
157/1PRMD
157/1PRMD
Catalogue Numbers
157/1PRMD Moulded deep plastic wall box 1 gang with sliding nuts suitable for standard 84mm centre plates including Slimline (box depth 70mm)
9
Catalogue Numbers
L955W/8WH
L955W/8BC
L955C/8WH
L955C/8BC
L955WF/8WH
L955WF/8BC
L955CF/8WH
L955CF/8BC
540 lumen output
55º beam angle
35,000 hour lamp life
Equivalent to 35W dichroic
11W total power consumption
Fixed or gimbal fixture options
Product Features
8W LED Downlights
Clipsal's range of LED downlights is expanding, with the introduction of a new 8W LED downlight that perfectly complements the popular 12W model. This new 8W downlight uses less power, however, Clipsal has been careful to ensure it has maintained all the quality and features you have come to expect.
The revolutionary aluminium heat sink design, along with onboard thermal dimming, remains so that Clipsal can continue to offer long life and safety protection. Through extensive testing and tuning, the 8W downlight works perfectly with Universal and C-Bus dimming technology.
As LED technology continues to be developed, Clipsal continues to be committed to providing you with the latest products that support your future needs.
Smarter LED downlights for optimal performance
L955C/8WHL955WF/8BC
With Clipsal's commitment to bring its customers energy-efficient and intelligent lighting solutions, it has taken the opportunity to phase out all our magnetic batten and T-bar products. The NEL Series of battens and T-bars now mean Clipsal's base offer is not only constructed with quality materials, but supplied with highly efficient electronic ballasts.
This is one of many initiatives Clipsal is making to ensure its products are sustainable for the future
Electronic Battens and T-bar
Bodies formed in white powder coated steel
Polycarbonate end caps and lamp holders
Weatherproof versions formed in polycarbonate base and diffuser
Electronic ballast
Colour 840 lamps included
DALI control options available
Product Features
A reliable, energy-efficient lighting solution
Catalogue Numbers
BB118NEL
BB218NEL
BB136NEL
BB236NEL
DB118NEL
DB218NEL
DB136NEL
DB236NEL
WP118NEL
WP218NEL
WP136NEL
WP236NEL
TB236NEL
WP236NEL
DB136NEL
10
DALIinfinity™ Soft Wiring 5 Pole
One of the most internationally recognised lighting protocols by manufacturers and authorities is the DALI (Digital Addressable Lighting Interface) international open lighting control protocol.
A DALIinfinity Soft Wiring 5 Pole system offers an efficient method of connectivity and installation of light fittings.
In the past, installers would normally install these light fittings with normal fixed 3 core double-insulated TPS cable for power, plus another 2 core mains rated cable for interface control. Now, with the DALIinfinity Soft Wiring 5 Pole system it’s not necessary, due to its Plug and Play feature.
Compatibility
Clipsal DALIinfinity is generally compatible with most Clipsal DALI products, as provided by Clipsal Integrated Systems and Clipsal Lighting.
DALIinfinity is compatible with many other manufacturers of DALI equipment and lighting products.
Catalogue Numbers
DI-DF-20 DALI Fly Lead Male Free End 2.0M 16A DALI Cables Only (2 x 1.5mm²)
DI-DL10 DALI Fly Lead Male Free End 1.0M 16A (5 x 1.5mm²)
DI-DL20 DALI Fly Lead Male Free End 2.0M 16A (5 x 1.5mm²)
DI-SI10 Interconnect Lead 5 Pole 1.0M 20A (3 X 2.5mm²) & (2 x 1.5mm²)
DI-SI20 Interconnect Lead 5 Pole 2.0M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI25 Interconnect Lead 5 Pole 2.5M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI30 Interconnect Lead 5 Pole 3.0M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI35 Interconnect Lead 5 Pole 3.5M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI40 Interconnect Lead 5 Pole 4.0M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI45 Interconnect Lead 5 Pole 4.5M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI50 Interconnect Lead 5 Pole 5.0M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI60 Interconnect Lead 5 Pole 6.0M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-SI70 Interconnect Lead 5 Pole 7.0M 20A (3 x 2.5mm²) & (2 x 1.5mm²)
DI-T 5 Pole T Connector
DI-H 5 Pole H Connector
DI-MA Snap-In Panel-Mount Connector Male 5 Pole
DI-FE Snap-In Panel-Mount Connector Female 5 Pole
DI-RW-FE Rewirable Socket Female 5 Pole
DI-RW-MA Rewirable Plug Male 5 Pole
DI-LD Locking Device
DI-SS Starter Socket
Unrivalled. Scalable. Flexible.
Product Features
One socket solution for installation
Easy to install (Plug and Play)
Unique keyway sockets indicating DALI circuits
Easy disconnection and re-connection of luminaires for relocation and maintenance
Easy installation of luminaires, emergency fittings and exit signs on one system
Wider range of accessories to suit every application
Cost-effective due to removable and reusable cabling and connectors. Ideal for expanding installations
DI-DL20 DI-T DI-DF-20
11
Cat. 6A Shielded Solution
With new technology constantly being introduced to the market, there is a need for reliable network cabling solutions to support such technology. So, Clipsal has released its 10 Gigabit Cat. 6A Shielded Solution.
The Clipsal solution uses a F/UTP constructed cable providing full immunity against any external noise interference. With a LSZH sheath as standard, it provides an environmentally friendly aspect to the offer.
The fully-shielded 30 Mech Cat. 6A Connector is the only one available on the market with a 30 Mech fascia, which allows for full adaptation into any Clipsal 30 Series Plates.
The straight patch panel gives all the same features and benefits that our customers have come to know with Earth bonding facilities. It comes with 24 keystone shielded connectors in the box.
The F/UTP patch cords have the snagless boot and also come with the LSZH sheath as standard, adding to the environmentally friendly nature of the solution.
Catalogue Numbers
2D4P6AILSF3B-BU Cat. 6A F/UTP LSZH LAN Cable
30RJ45SM6AF Cat. 6A Shielded Jack 30 Mech
RJ45SM6AF Cat. 6A Shielded Jack Keystone
RJ6AF/24PP 24-Port Cat. 6A Shielded Patch Panel Straight
RJ6AF8A10LPL-BU Cat. 6A F/UTP LSZH Patch Cord 1m
RJ6AF8A20LPL-BU Cat. 6A F/UTP LSZH Patch Cord 2m
RJ6AF8A30LPL-BU Cat. 6A F/UTP LSZH Patch Cord 3m
RJ6AF8A50LPL-BU Cat. 6A F/UTP LSZH Patch Cord 5m
Cat. 6A F/UTP Cable Features
F/UTP cable, LSZH sheath
Full AXT immunity
23AWG, 305m reel
Supporting 10Gbs transmission
The high performance data solution
RJ6AF/24PP
Cat. 6A Shielded Connectors Features
Toolless termination
30 Mech aperture to suit Clipsal wall plates
Flexible locking tabs
Fully shielded for AXT immunity
Cat. 6A Patch Panels Features
Nickel-plated and powder- coated frames
Earthing point
Flexible labelling system
All mounting hardware supplied
Cat. 6A F/UTP Patch Cords Features
F/UTP stranded cable, LSZH sheath
Snagless boot
Backward compatible to Cat. 5E & Cat. 6
Supporting 10Gbs transmission
30RJ45SSM6AF RJ6AF8A30PL-BU
12
StarServe Data Home Distribution Unit
Adding to the current range of StarServe Enclosures is Clipsal's locally designed, moulded plastic enclosure. It has been specifically designed for National Broadband Network (NBN) equipment and your home networking equipment, all within the one enclosure.
Having all equipment housed within the one enclosure provides a convenient location to centralise your home networking solution.
Product Specifications
Dimensions – 750mm (h) x 405mm (w) x 150mm (d) Cut-out dimensions – 760mm (h) x 415mm (w)
Centralised and simple
Catalogue Numbers
3105PEN7440 ABS Enclosure Home Distribution Unit
Product Features
Made from moulded plastic (White Electric colour)
Wi-Fi network compatible
Multi-use flexibility - gear tray is supplied unpopulated (except for small StarServe rack) to allow installers to install whatever product they require
Designed to house NBN equipment and additional networking products, such as StarServe data and phone patch panels
Two key locks on door for limiting access, uses matching key (CL001)
Suitable for surface or semi-flush mounting
Flush mounting flange supplied as standard
Removable hinged door with captive door hinges
Vented door (top and bottom)
Removable, moulded plastic, full length gear tray with moulded grid lines
Cut-out provisions on top and bottom of enclosure for mounting a GPO
Zoned areas on rear of the gear tray using removable plastic segregation channels, one at top, one at bottom of enclosure
Pre-cut hole section on rear gear tray to allow for coax cables to connect to MATV equipment
Redesigned StarServe mounting rack included
Pre-drilled holes in sides of enclosure to aid in fixing into wall
Rear of enclosure body populated with 20mm and 25mm knockouts to allow for easy cable entry
Gear tray made of plastic
Four additional mounting turrets on rear of enclosure for gear tray mounting
Parts pack including blanking plugs for mounting screws and two keys for door locks
Customer Benefits
Constructed from plastic ensuring that it is Wi-Fi network friendly
Moulded plastic; enclosure is non-conductive and does not require Earthing. If power outlets (GPOs) are installed - they will still require Earthing as per Australian Standards
White Electric colour ensures product will blend in with other electrical accessories
Enough space to fit all NBN product plus additional equipment
Only one enclosure required for all installations, surface or flush mount
Pre-drilled holes in sides of enclosure to aid in mounting
Rear of enclosure body populated with 20mm and 25mm knockouts to allow for easy cable entry
3105PEN7440
All equipment in picture is for illustration purposes only and not supplied with the enclosure.
13
Catalogue Numbers
110PDT 110 Punchdown Tool
Adding to the current range of terminating tools for the Datacomms range of connectors, Clipsal has released a new 110 Punchdown Tool. 110PDT has all the necessary features and benefits that is required by the installer to perform the task at hand.
Indented sides for finger comfort
Reversable blade for cutting and non-cutting
Hi-Lo impact options
Extra blade housing facility
Bladelocking system compatible with Clipsal’s spare 110 Blade (TRJ45PDTB)
Product Features
110 Punchdown Tool
Slim design for installer comfort
Clean cutting blade
Replaceable blade
Durable construction
“CUT” indicated clearly to indentify cutting side of blade
Customer Benefits
Catalogue Numbers
2T4CIRW5 Core Jumper Wire Red/White 400m Reel
2T4CIGW5 Core Jumper Wire Green/White 400m Reel
Catalogue Numbers
3105RG6CC10 RG6 Compression Connector 10Pk
3105RG6CC50 RG6 Compression Connector 50Pk
3105RG11CC RG11 Compression Connector 2Pk
2-Core Jumper Wire Clipsal has changed the metre roll length of its two lines of Jumper Wire, due to customer demand in a progressive market. The red/white and green/white jumper wire is now supplied in 400m reels. The product specifications and price (per metre) have not changed.
To enhance its existing FOXTEL product offer, Clipsal has released FOXTEL approved compression connectors and compression tools. These termination products, when used with our FOXTEL Approved Coaxial Cables, (3105RG6Q3B and 3105RG11Q3R) will allow you to supply and terminate compliant cabling for FOXTEL commercial installations.
Compression connectors
• RG6 connectors are available in either installer sized packs or a smaller pack for domestic installers. The 3105RG6CC10 pack includes 10 connectors, whereas the 3105RG6CC50 pack includes 50 connectors.
• RG11 connectors are also available for commercial installation fit-offs. The 3105RG11CC pack includes two connectors.
Compression tools
Clipsal offers two styles of compression tool, one for economy and one for professional use.
• The Economy Compression Tool 3105RG6CCT for domestic FOXTEL installers using RG6 cable, is suitable for use with 3105RG6CC10 and 3105RG6CC50.
• The Professional Compression Tool 3105RG6/11CCT is suitable for commercial installers using RG6 and RG11 cables, and can be used with 3105RG6CC10, 3105RG6CC50 and 3105RG11CC.
Foxtel™ Connectors & Tools
110PDT
2T4CIRW5
3105RG6CC103105RG11CC
3105RG6CCT Economy Compression Tool
3105RG6/11CCT Professional Compression Tool
3105RG6/11CCT
3105RG6CCT
14
Catalogue Numbers
5754ODPEIR C-Bus Surface-Mount 360° PIR Occupancy Detector and Light Level Detector, with IR receiver
5754ODPE C-Bus Surface-Mount 360° PIR Occupancy Detector and Light Level Detector
5754PE C-Bus Surface-Mount Light Level Detector
5754ODPEIR
C-Bus® 30 Series Mechanism SpacerExciting new optionsThe C-Bus 30 Series Mechanism Spacer provides the ability to install C-Bus 30M Switches into Saturn 4000 (250V) Series Grid Plates and Covers.
The C-Bus 30 Mechanism Master and Slave Switches are mated quickly with Saturn Grid Plates using this self-adhesive, round polyurethane spacer, resulting in seamless button operation.
This opens up exciting new options for C-Bus wall switches, such as 1-button Saturn Wall Switches and Saturn Architrave Wall Switches.
Catalogue Numbers
5031NMSPACER C-Bus 30 Series Mechanism Spacer (pack of 60)
Product Features
Clear, round polyurethane self-adhesive spacers
Supplied in a bag of 60 pieces
Achieve C-Bus 1-button Saturn Wall Switches
Achieve C-Bus 1 and 2-button Saturn Architrave Wall Switches
5031NMSPACER
C-Bus® Surface-Mount 360º Detectors
The new C-Bus Surface-Mount 360º Detectors provide an immediate solution for the installation of C-Bus Detectors onto solid surfaces, such as masonry or wood. The new products are based on existing C-Bus Detection Technology and enclosure design.
The three new products include:
• C-Bus 360° Detector with occupancy, light level and infrared control functionality
• C-Bus 360° Detector with occupancy and light level functionality
• C-Bus Light Level Detector.
All variants are effectively based on the current flush-mount C-Bus Multi-Sensor, resulting in a number of new features in the occupancy and light level detectors.
New to all C-Bus Surface-Mount 360º Detectors are configurable set points that can be controlled by C-Bus to adjust system behaviour parameters such as light level target and light level margin.
New mounting solution to suit surface mount applications
Low profile surface-mount design
Uses passive infrared (PIR) detection with manually adjustable sensitivity to motion
Software programmable time delay
Motion detection coverage typically 7.6m diameter (at 2.7m mounting height)
C-Bus control of light level target, light level margin, high/low lux levels and high/low thresholds
Bank switching of lighting levels based upon the light level set-point
Daylight harvesting to maintain a constant user-configured light level
Streamlined product platform
Product Features
A new mounting solution
15
Catalogue Numbers
5500CN2 C-Bus Network Interface Version 2
C-Bus® Network Interface V2
Product Features
New Ethernet interface
Configure IP address using the C-Bus IP Utility software
Provides an isolated communication path between a C-Bus and an Ethernet network
DIN rail mounted, 4M wide
Powered from supply voltage of 6-12V d.c.
Includes 9V d.c. plug pack
The C-Bus Network Interface has been updated to a new version 2 product. The new version 2 is effectively a DIN rail format of the in-line C-Bus Network Interface supplied with the Wiser™ Home Controller.
The functionality of the new version 2 C-Bus Network Interface has not changed and the platform is now common across both the DIN rail format and in-line format. The new version 2 is now configured using the C-Bus IP Utility and is powered by a 6-12V d.c. plug pack.
Can act as a programming interface into C-Bus
Create multi-network installations based on an Ethernet backbone
Monitor and log data using the appropriate software
Provide C-Bus device control via automation software such as Schedule Plus or HomeGate
5500CN2
L5112D20LPR12C L5106D20UAR6C
Product update
Catalogue Numbers
L5112D20LPR12C C-Bus Professional Dimmer, chassis only, 12-channel, 20A per channel, 12 RCDs onboard
L5112D10LPR12C C-Bus Professional Dimmer, chassis only, 12-channel, 10A per channel, 12 RCDs onboard
L5106D20LPR6C C-Bus Professional Dimmer, chassis only, 6-channel, 20A per channel, 6 RCDs onboard
L5106D10LPR6C C-Bus Professional Dimmer, chassis only, 6-channel, 10A per channel, 6 RCDs onboard
L5112D10UAR12C C-Bus Architectural Dimmer, chassis only, 12-channel, 10A per channel, 12 RCDs onboard
L5106D20UAR6C C-Bus Architectural Dimmer, chassis only, 6-channel, 20A per channel, 6 RCDs onboard
L5106D10UAR6C C-Bus Architectural Dimmer, chassis only, 6-channel, 10A per channel, 6 RCDs onboard
C-Bus® Architectural and Professional Dimmers (Chassis Only)
C-Bus Architectural and Professional Dimmers are high-powered, multi-channel dimmers, and due to their modular design can provide total flexibility for product variants or configurations.
The new chassis only offer excludes dimmer channel cards and comprises:• C-Bus Architectural and Professional Dimmers• 6 and 12-channel models• 10 amp and 20 amp MCB models• onboard RCBO per channel.
The range is designed for commercial applications such as pubs, clubs, restaurants, entertainment venues, hotel ballrooms and convention centres.
These multi-phase control units are compatible with a wide range of load types, including incandescent and halogen lamps, transformer-based low voltage lamps and neon tube lighting. The compatible dimmer channel cards provide solutions for universal dimming, leading-edge dimming, trailing-edge dimming and ballast control. It’s simply a matter of installing the required channel cards to suit the customer's exact needs, reducing costs and saving time.
Complete dimmer chassis offer excluding channel cards
6 and 12-channel models
10 amp and 20 amp MCB models
Onboard RCBO per channel (accommodates the full RCD requirements of AS/NZS3000:2007)
Architectural range provides C-Bus or DMX512 operation modes
Install chassis during specification/construction stage and determine channel cards later
Populate channels as required
Modular solution increases flexibility to suit custom installations and changing customer needs
Product Features
The configurable solution
16
C-Bus® Toolkit Software Enhancements
C-Bus Toolkit is a PC-based network configuration and solution programming utility. It allows installers to program, commission and manage C-Bus installations.
The latest upgrades of C-Bus Toolkit will allow installers to start working sooner, with improved productivity and a reduction in overall programming time.
A large number of new features form part of the new Toolkit Software (V1.12.0 onwards).
C-Bus® Wireless Battery Operated Wall Switches
The C-Bus Wireless Battery Operated (Freelocate) Wall Switches are native C-Bus Wireless devices. Identical in operation to the C-Bus Wireless Remote Control, Freelocate wall switches are radio frequency (RF) control devices that are able to control loads on C-Bus Wireless devices or loads on a wired C-Bus network.
Freelocate wall switches provide the upmost flexibility providing control of C-Bus loads and devices from places where wiring cannot be run or in some cases, doesn't need to be run.
A mounting plate is supplied with the Freelocate wall switches, which contain standard 84mm mounting centres. Once installed, this allows a C-Bus Wireless Wall Switch to be removed from the mounting plate and used as a handheld remote control, if desired.
The C-Bus Wireless Battery Operated (Freelocate) Wall Switches include two versions; a two-button and a six-button. The six-button version contains five control buttons and one "All Off" button. The "All Off" button will turn off the loads or devices associated with the five control buttons. The six-button Freelocate wall switch also contains a window to suit a slide-in printable label. This backlit window along with button labels, make identifying control buttons quick and easy.
The two-button and six-button Freelocate wall switches are available in the Saturn range only - in Pure White, Ocean Mist and Espresso Black finishes.
Product Features
Battery operated wall switch
Two-button and six-button (five control + one "All Off")
Six-button contains a backlit window to suit slide-in printable label
Available in Pure White, Ocean Mist and Espresso Black
Supplied with mounting plate (with standard 84mm centres)
User replaceable lithium batteries (CR2025 x 2)
Battery life (typical): o two-button (three years) o six-button (two years).
Low battery LED indication
Seamless control of devices, loads and functions on a C-Bus Wireless or C-Bus wired network
C-Bus control from places where wiring cannot or need not be run
Can be used as a C-Bus RF Remote
Catalogue Number
5882TXWMBA-PW 2-button, Saturn style, Pure White
5882TXWMBA-OM 2-button, Saturn style, Ocean Mist
5882TXWMBA-EB 2-button, Saturn style, Espresso Black
5886TXWMBA-PW 6-button (5 control + 1 "All Off"), Saturn style, Pure White
5886TXWMBA-OM 6-button (5 control + 1 "All Off"), Saturn style, Ocean Mist
5886TXWMBA-EB 6-button (5 control + 1 "All Off"), Saturn style, Espresso Black
5886TXWMBA-PW
C-Bus Toolkit Software
Easily extend any C-Bus installation
Start working sooner
Product Features
Background network scan
Duplicate detection
Refresh network
Unravel improvements
Applications panel
Copy and paste
Unit templates
Smarter shutdown
Concurrent use of Clipsal software applications
C-Gate service
C-Gate configuration options.
17
C-Bus® Occupancy Controllers
The C-Bus Occupancy Controller provides control of lighting based on the occupancy status of the zone or room being controlled. The C-Bus Occupancy Controller is suitable for many lighting control applications, with a particular focus on satisfying the need for minimum lighting control requirements in commercial lighting applications. Controlled areas can include meeting rooms, stairwells, open-plan office environments, car parks and washrooms.
The C-Bus Occupancy Controller is available in one or two-zone models, which incorporate a 16A relay output per zone for lighting loads. A third model provides two zones of relay switching plus two additional dimmer outputs for control of DSI, DALI or 0-10V ballasts.
The occupancy controller provides input control from detectors, auxiliary (mechanical) switches, remote override switches or C-Bus devices. Timers can be set on either the detector, the controller or for more complex timing options, within C-Bus (Toolkit).
Also included within the offer is a range of wall and ceiling-mount motion detectors based on PIR, ultrasonic and dual PIR/ultrasonic sensing technologies. The occupancy controller provides power to the detectors connected to it (up to three per zone). The input switch can use all standard toggle and bell-press Clipsal wall switch types for manual control.
The C-Bus Occupancy Controller operates with or without connection to a C-Bus network. Incorporating an area managed by a C-Bus Occupancy Controller into a larger control system at a later stage, is as simple as connecting it to C-Bus. Stand-alone versions of the occupancy controllers are also available, which do not have the ability to connect to C-Bus.
Product Features
One and two zone models with 16A relay output per zone
Two zone model with 16A relay output per zone, plus ballast control output per zone
Selectable ballast control output - DSI, DALI (broadcast) or 0-10V analogue signals
Detector inputs
Auxiliary/switch inputs
Onboard timers and relay fail-safe mode
Remote override on/off capability
Direct connection of detectors (up to three per zone)
Power for detectors supplied by the controller
Wide range of wall and ceiling-mount detectors
Easy to install
Works out of the box
Self contained (cable directly to unit)
Quick, easy and cost-effective
Highly flexible C-Bus programming
Can be upscaled (future-proof)
Catalogue Number
5752PP/1RC-Bus Occupancy Controller, 1 zone, 1 relay output
5752PP/2RC-Bus Occupancy Controller, 2 zones, 2 relay outputs
5752PP/2R/2DC-Bus Occupancy Controller, 2 zones, 2 relay outputs plus 2 ballast control (dimmer) outputs
752PP/1RStandalone Occupancy Controller, 1 zone, 1 relay output
752PP/2RStandalone Occupancy Controller, 2 zones, 2 relay outputs
752/CPCeiling-Mount PIR Detector, 360°
752/CUCeiling-Mount Ultrasonic Detector, 360°
752/CDCeiling-Mount Dual-Technology (PIR and Ultrasonic) Detector, 360°
752/CU180Ceiling-Mount Ultrasonic Detector, 180°
752/CD180Ceiling-Mount Dual-Technology (PIR and Ultrasonic) Detector, 180°
752/WPWall-Mount PIR Detector, 110°
752/WUWall-Mount Ultrasonic Detector
752/WDWall-Mount Dual-Technology (PIR and Ultrasonic) Detector, 110°
A cost-effective sensor control solution
5752PP/1R
752/CD 752/CD180 752/WD
18
Xantrex™ GT Series System Control Panel
This GT System Control Panel is a remote device that connects to the GT Inverter, via a Cat. 5 data cable and allows the inverter's operating parameters to be displayed inside the home. The GT System Control Panel is powered off the GT Inverter, via the Cat. 5 cable and no external power supply is required. The GT System Control Panel features an easy to read screen, and large buttons for menu navigation.
The GT System Control Panel can be used to monitor a single or multiple GT Inverters where the accumulated data is shown on the display.
Get connected with Xantrex Grid-Tie Inverters
Catalogue Numbers
864-0203 Xantrex GT System Control Panel
Product Features
Connects to GT range of inverters
Central time controller for the solar system
LCD display shows status at a glance
Audible alarm for fault condition
Indoor use only
Conext TL Three Phase Grid-Tie Inverters
The new Conext TL 15kW and 20kW Grid-Tie Solar Inverters are suited for outdoor use and are the ideal solution for small commercial building rooftops and other similar applications. The inverters provide a wide Maximum Point Power Tracking (MPPT) voltage range, an EU efficiency of 97.3%, fast ROI and high availability. Backed by Schneider Electric’s global service, the Conext TL Series are inverters you can rely on, from a company you can count on.
You can rely on Conext TL Grid-Tie Inverters
Catalogue Numbers
PVSNVC15000 15kW Three Phase Grid-Tie Inverter
PVSNVC20000 20kW Three Phase Grid-Tie Inverter
Product Features
A smart solution, which is easy to install and maintain
Transformerless design with high peak and EU efficiency
Dual independent MPPT trackers with wide voltage range
LCD display provides instantaneous information including power level and daily energy
Modbus communication protocol seamlessly integrates the inverter with other Schneider Electric equipment
864-0203
PVSNVC15000
19
Conext XW Series Hybrid Inverter/Chargers
Adaptable and scalable, the Conext XW system is the one solution for grid interactive and off-grid, residential and commercial, solar and backup power applications. Utility connected users will appreciate the flexibility of being able to generate power from solar modules and provide that power back to the utility, or simply store power and act as a backup power system when the grid fails. Unlike a UPS, the Conext XW is integrated into the home’s electrical system and seamlessly transfers power from battery reserves to critical loads in the event of a power outage or brown-out.
Adaptable and scalable
Catalogue Numbers
865-1035-61 XW6048-230-50 6kW Conext XW Inverter/Charger
865-1040-61 XW4548-230-50 4.5kW Conext XW Inverter/Charger
865-1045-61 XW4024-230-50 4.0kW Conext XW Inverter/Charger
Product Features
Scalable power (4.0kW/4.5kW/6.0kW)
Multiple units can be installed in clusters with up to 24kW in single phase
Full grid-tie functionality and integration with MPPT Solar Charger Controllers
Integrates and manages hybrid power options with dual a.c. inputs
Full control of generator with optional Automatic Generator Start module (AGS)
True sine wave output and high surge capacity to start difficult loads
Conext XW Series Solar Charge Controllers
The XW Series of Solar Charge Controllers track the maximum power point of a photovoltaic (PV) array to deliver the maximum available current for charging batteries. When charging, the MPPT units regulate battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.
The MPPT 60 150 supports PV arrays with open-circuit voltage of up to 150V with a maximum charge current of 60A into 12, 24, 36, 48 or 60V d.c. battery systems. The MPPT 80 600 supports PV arrays with open circuit voltage of up to 600V with a maximum charge current of 80A into 24V and 48V d.c. battery systems.
For improved battery life
Catalogue Numbers
865-1030-1 XW MPPT 60-150 Solar Charge Controller
865-1032 XW MPPT 80-600 Solar Charge Controller
Product Features
Maximise PV array performance with Fast Sweep™ Maximum Power Point Tracking (MPPT) algorithm
Compatible with all PV cell types
Improve battery life with selectable two or three-stage charging algorithms
Compatible with FLA, AGM, or Gel battery systems
865-1032 865-1030-1
865-1035-61
20
865-1060
865-1050
Conext XW Series System Control Panel
Conext XW Series Auto Generator Start
The XW Series System Control Panel (SCP) is used to program and interface with the XW Series of Inverter/Charger and Solar Charge Controllers. The SCP features a graphical, backlit LCD display that provides system configuration and diagnostic information for devices connected to the Xanbus-enabled network. Navigation between the programming menus is via the tactile push-buttons located on the unit. The System Control Panel is physically the same as the GT System Control Panel, but that is where the similarities stop. They feature different firmware and are not interchangeable.
The Conext XW Series Auto Generator Start (AGS) will automatically activate a generator to provide a Conext XW Inverter/Charger with power to recharge a depleted battery bank or provide additional power for heavy loads. The AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads. It does this by continuously monitoring the battery voltage, state-of-charge, or the inverter charge mode; starting and stopping the generator when the battery needs additional charging. The AGS will also start the generator to assist the system’s XW Inverter/Charger(s) when output power demands are high.
For devices connected to the Xanbus-enabled network
Intelligence for generator management
Catalogue Numbers
865-1050 XW Series System Control Panel
Catalogue Numbers
865-1060 XW Series Auto Generator Start
Product Features
Connects to XW Series of Inverters, Chargers or Solar Charge Controllers
Central time controller for the solar system
LCD display shows status at a glance
Audible alarm for fault condition
Indoor use only
Product Features
The Auto Generator Start connects to Xanbus-enabled XW systems
Works with a.c. or d.c. generators, with 2-wire or 3-wire start controls
Preserves AGS settings even if the network power is removed
21
865-1025
130-0004-03-01
Conext XW Series Accessories
The Conext XW Series Conduit Box (CB) and the Battery Temperature Sensor (BTS) are designed for use with the XW Series. The CB can be used to create systems larger than two inverters, or to retrofit Conext XW Inverters/Chargers into existing systems. The BTS mounts on the battery to measure the temperature and is used by the Conext XW Inverter/Charger and the Solar Charge Controller. The BTS is supplied with a lead length of 10.7m (35ft).
For flexibility and reliability
Catalogue Numbers
865-1025 XW CB Conduit Box
130-0004-03-01 XW Battery Temperature Sensor
Product Features
Conduit Box Dimensions 229mm x 406mm x 210mm
Conduit Box Weight 4.6kg
BTS Cable Length 10.7m (35ft)
22
56 Series™ Deep Base/Cover Switch (56SWH) range redesign
The well known and accepted Kraus & Naimer Load Break Switch is now standard within the Clipsal 56 Series (56SWH) range. Along with increased cabling room, the 56SWH Series Switch also provides improved AC23 motor ratings.
Available in both three and four-pole arrangements, and amperages of 25A, 40A, 63A and 80A (three-pole only), the 56SWH is ideal for industrial switching applications.
Increased cabling room to assist with easier cable management
K&N, KF and CA base-mounted switch mechanisms provides easy access to terminals
Improved AC23 motor ratings
Colours of Grey (GY) for traditional installations and Resistant Orange (RO) for chemical resistance
Red/yellow switch for easy identification
Enclosed in two-gang, 56 Series Deep Switch Cover
Product Features
For increased cabling room
56SWH463
Catalogue Numbers
56SWH325 Triple-pole 25A, AC23
56SWH340 Triple-pole 40A, AC23
56SWH363 Triple-pole 63A, AC23
56SW380 Triple-pole 80A, AC23
56SWH425 Four-pole 25A, AC23
56SWH440 Four-pole 40A, AC23
56SWH463 Four-pole 63A, AC23
23
Introduction of MACTRO technology cable seal system
Wider lock-ring is easier to unscrew from sockets (ideal while wearing protective gloves)
Small and large cable glands provided to suit a wide range of cable dimensions
Clean design with less grooves to minimise dirt build-up
Product Features Catalogue Numbers
56P332, 56P432 and 56P532 Straight Plugs, 32A
56P440 and 56P540 Straight Plugs, 40A
56P450 and 56P550 Straight Plugs, 50A
56PA332, 56PA432 and 56PA532 Angled Plugs, 32A
56PA440 and 56PA540 Angled Plugs, 40A
56PA450 and 56PA550 Angled Plugs, 50A
56CSC332, 56CSC432 and 56CSC532 Socket Connectors, 32A
56CSC440 and 56CSC540 Socket Connectors, 40A
56CSC450 and 56CSC550 Socket Connectors, 50A
56PO432 and 56PO532 Pendant Outlets
56PO440 and 56PO540 Pendant Outlets
56PO450 and 56PO550 Pendant Outlets
Accessories Catalogue Numbers
56SHL Suspension Hooks
56PCI Protective Cap (to prevent dirt and water accessing plug pins)
56AM40 Adaptor Module (suitable for adaption of flexible conduit, glands or hose adaptors)
56 Series™ Plug and Socket Connector Upgrade
As part of the ongoing product improvement process, Clipsal is proud to announce the arrival of the redesigned 56 Series Three Phase 32A to 50A Plugs and Socket Connectors.
Product part numbers will not alter as part of this transformation and all existing colours, Electric Orange (EO), Resistant Orange (RO) and Grey (GY) will be included.
New products can be identified by the MACTRO logo, which appears on all related product packaging.
For reliable performance under tough conditions
For more information on the entire 56 Series Plug and Socket Connector range, please contact your Clipsal sales office for a copy of the technical brochure.
56SHL 56PCI 56AM40
Coinciding with the release of the new 56 Series product range, will be the release of the following 56 Series Plug Accessories.
Conext TL Three Phase Grid-Tie Inverters
Page 18
56 Series Plug & Socket Connector Upgrade
Page 23
DALIinfinity Soft Wiring 5 Pole
Page 10
Electronic Battens and T-Bar
Page 9
Conext XW Series Hybrid Inverter /
Chargers Page 19
Xantrex GT Series System Control Panel
Page 18
56 Series Deep Base/Cover Switch
Range Redesign Page 22
C-Bus® Wireless Battery Operated
Wall Switches Page 16
C-Bus® Toolkit Software Page 16
Conext XW Series Auto
Generator Start Page 20
Conext XW Series Solar Charge Controllers Page 19
Conext XW Series System Control
Panel Page 20
2-Core Jumper Wire Page 13
Foxtel Connectors & Tools
Page 13
110 Punchdown Tool Page 13
C-Bus® Occupancy Controllers Page 17
Conext XW Series Accessories Page 21
C-Bus® Surface-Mount 360º Detectors
Page 14
C-Bus® 30 Mechanism Spacer
Page 14
C-Bus® Architectural and Professional Dimmers
Page 15
C-Bus® Network Interface V2 Page 15
O.Erre Industrial Fans Page 7
8W LED Downlights Page 9
Weatherproof Sunset Switches
Page 5
Ecomind Electricity Monitor
Page 5
Push-Button and Rotary Controlled Dimmer
Page 6
Impress Page 4
Strato 8000 Series
Page 3
Modena 8000 Series
Page 3
StarServe Data Home Distribution Unit
Page 12
Cat. 6A Shielded Solution Page 11
415VF Caravan Socket Outlet
Page 4
Slimline Xtra Switch Page 7
NEW PRODUCTS AT A GLANCE
© 2012 Schneider Electric. All Rights Reserved.
Trademarks are owned by Schneider Electric Industries SAS or its affiliated companies.
Schneider Electric (Australia) Pty Ltd
33-37 Port Wakefield Road, Gepps Cross South Australia 5094
PO Box 132, Enfield Plaza, South Australia 5085
National Customer Care Enquiries: 1300 2025 25
O/N 25324CLIPCOM25324 November 2012
Website: clipsal.com Contact us: clipsal.com/feedback
You can find this brochure and many others online in PDF format at: clipsal.comFollow the links off the home page or access the following page directly: clipsal.com/brochures
C4-
016
Schneider Electric (Australia) Pty Ltd reserves the right to change specifications, modify designs and discontinue items without incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error therein.
This document has been printed using FSC Mix Certified paper. ISO 14001 environmental management system in use at mill.
Deep Plastic Wall Box Page 8