®BBISHISHOOPPWWIISSECECAARRVVERER

™Motion Without Limits

MinVee™

Linear Slide System

Built On

PRODUCTNEW

INTRODUCTION

Wheel Load Capacity up to 110 lbs.

Speeds up to 5 Meters per Second

��

��

�� ����

MinVee™ FeaturesWheel Carriage• (4) Size 0 DualVee® Wheels

(2) Concentric (2) Eccentric Carbon Steel or Polymer over-molded stainless steel

Double row angular contact bearings, AISI 52100 Integral stud shaft design

• Carriage Anodized Aluminum 6061-T5 Stainless steel lubricator housing Felt lubrication pads

• Service Interval: 100km (62.1 miles at 32º C or 73º F) and 50% humidity at stated load capacities

• Temp. Range: -20º C to +120º C

Track• Size 0

• Double Edge Design Assure Parallel Vee Ways

• Patented Mounting Shoulder, Accurate Vee Ways Positions

• Carbon Steel AISI 1045 Hardened (Rc 53) polished Unhardened (Rc 22-55)

Load, Speed, LifeLoad Capacity - Based on 100km Service Life

LF = + + + +LR LA MP MY MR

LR max LA max MP max MY max MR max

Life Calculation:

Service Internal (km) = @ LF < 1100

.9LF +.2

Patented Mounting Shoulder, Accurate Vee Ways Positions

Motion Without Limits TM

Wheel Carriage

Type

Axial Working

Load

Radial Working

Load

Pitch Moment

Yaw Moment

Roll Moment

LA LR MP MY MR

Size 0 Steel

540 N 490 N 7.9 Nm 8.6 Nm 6.2 Nm

121.4 lbf 110.2 lbf 69.9 lbf 76.1 lbf in 54.9 lbf in

Maximum Speed 5m/sec (16.4 ft/sec) Maximum Acceleration 49m/sec2 (5 g’s)

Size 0 Polymer

44 N 65 N 1.4Nm 4.5Nm 1Nm

9.9 lbf 14.6 lbf 12.4 lbf in 39.8 lbs in 8.8 lbf in

Maximum Speed 1m/sec (39.9 in/sec) Maximum Acceleration 29.4m/sec2 (3 g’s)

Eccentric Wheels(wheel preload adjustment)

���

���

�����������

���

�

�

��� �

���

�� �� ��� �� ��

��

�����

�����

����

����

�����

�����

����

����

����������������������������������

����

����

���������������������

Motion Without Limits TM

W H MDT MSC MSD ES HS2 MH MHL L1

0.516 0.153 0.158 0.06 0.033 0.25 2 0.156 0.138 Model Code Table

Notes1. The overall length tolerance is 0.015 inches2. Hole spacing tolerance is 0.005 inches

+-

+-

How to Order 1. Wheel Carriage: Quantity and Model

2. Track: Standard Lengths

3. Track Support Spacers: Part # MV0518H, Steel 0.97” High (1 per mounting hole)

Wheel Carriage Models

Track Options:• Non standard track lengths optional up to 20 ft.• Custom coating/plating are black oxide, electroless and nickel.

Model Length (inch)

Number of Holes

TDO-650-4 6.5 4

TDO-1250-7 12.5 7

TDO-1850-10 18.5 10

TDO-2450-13 24.5 13

TDO-3050-16 30.5 16

TDO-3650-19 36.5 19

MV0WPA Wheel carriage with steel wheels with shielded bearings

MV0WPAX Wheel carriage with steel wheels with sealed bearings

MV0WPAX Wheel carriage with polymer wheels with shielded bearings

Size 0 Track with Pre-Drillled Mounting Holes

*For longer lengths contact factory.

© Bishop-Wisecarver Corporation 2005. All rights reserved

QuickTrak®

BishopWisecarver provides a written one year limited warranty assuring the customer that its products conform to published specifications and are free from defects in material or workmanship.

888.580.8272 www.bwc.comPart # CAT-MV July 2005

®BBISHISHOOPPWWIISSECECAARRVVERER

HDS Heavy Duty Slide System

PRT Ring and Track System

SL2 Corrosion Resistant System

LoPro®

Linear Motion SystemDLS

Driven Linear SystemGV3 Linear Guidance System

HDLS Heavy DutyDriven Linear System

DualVee®

Guide Wheels

Simple-Select® DTS Driven Track System

MCSAluminium Profile Sections

PRODUCTS :

UtiliTrak™

PDU2

Bishop-Wisecarver Corporation: Exclusive North and Central American Partner and Distributor for HepcoMotion Products since 1984.

PRODUCT ORDERSPlease call BishopWisecarver with your specific length requirements and additional ordering assistance. Our technical staff is available to assist with information specific to your application.

PSD120

MinVee™

®BBISHISHOOPPWWIISSECECAARRVVERER