New Frameless System A world of possibilities · 2019. 11. 26. · 9227, ASTM B117, DIN 50021. More...
Transcript of New Frameless System A world of possibilities · 2019. 11. 26. · 9227, ASTM B117, DIN 50021. More...
Maintenance is minimum due to the system conception and the use of high quality materials. This results on a higher reliability and security
The weight of the system remains on the bottom track
Up to 20 panels per opening
Available for 8, 10 & 12mm glass
Valid for most of the locking systems
Totally ground sunken installation
Works over sliding surfaces.No bearings
Free opening configuration
High height regulation (up to 76mm)
All options for producing the systemOur clients can have the system in full length bars, precut and mechanized our fully finished, ready to install
Glass with no need of screwsHigher reliability and lower cost because ther is no need for special screws or drills in the glass
Easy and simple manufacturing and installingUp to 50% time reduce in the labour cost
Frameless SystemA world of possibilities
Valid for laminated or tempered glassGlued glass (doesn’t requires screws)
Bottom weight systemMaximum security. Valid for any type of structure
No wheels or bearingsMaximum reliability. Smooth and silent functioning over the sliding tracks
Minimum maintenanceNo need for annually highly cost check-up
PIVOTSYSTEM
The Frameless System from MN STEKLO ®, Pivot System is the best and more practical alternative to conventional balcony glazing and standard glass curtain systems.
MN STEKLO ERP© for the clientsA whole solution tool for our product: Project Design, Quoting, System Orders and Stock Control
WarrantyAll MN STEKLO® products have 5 year warranty
● OPENING DESIGN. From inside to outside or to inside, or vice versa, you can easily configure the opening according to your needs. Top and bottom door lock.
● COLORS. Anodized and powder coating.
● GLASS. Laminated or tempered. 8, 10 or 12mm thickness.
● CORNERING TURN. Between 90º & 270º.
● VENTILATION POSSITION.
● HIGH RESISTANCE COMPONENTS. Obtained under saline mist test ISO 9227, ASTM B117, DIN 50021. More than 750 hrs in chambers.
● COMPONENTS. Protected and covered by a thin Zinc & Aluminium layer. Good resistance to corrosion, modifying the friction factor without alter the hydrogenation.
● Wind resistance: Type 6
● Acoustic allowance: 34 dB
● Thermal isolation: 5,6 W/m2K
● Permeability to air: Type 2
Anodized certified suppliers
● Panel width: 800 mm
● Door width: 1000 mm
● Maximum height: 3000 mm
● Maximum panels per opening: 20
● Sliding Door panel: 950 mm
SIMPLE PRODUCTION
Manufacturing & installing advantages
Extremely easy processes. No need for special training.
EASY TO INSTALL TIME SAVING
Components designed to optimize time on site
Manufacturing up to a 50% faster. Installation in half of the time
No need for annually check-up
ZERO MAINTENANCE
SUNKEN SYSTEM
MOUNTED SYSTEM
Armless System Side Lock Sliding DoorSnow Kit
Features
Special configurations
Technical features
Maximum
PIVOTSYSTEM
Possible installations
Information:MN STEKLO d.o.o.PELECHOVA CESTA 151235 RADOMLJETel: +386 31 554 888E-mail: [email protected]
http://www.zastekli.si