NEW ENGLAND EMULSIONS CORP. - asmg. · PDF fileNEW ENGLAND EMULSIONS CORP. ... (TACK COAT)...

2
NEW ENGLAND EMULSIONS CORP. 201 LOWLAND STREET PHONE: 508-429-5550 HOLLISTON, MA. FAX: 508-429-4237 01746 Phone: Emergency: Will Not Occur Hazardous Decomposition Products: Petroleum Asphalt 8052-42-4 55 - 65 Holliston, MA 01746 Asphalt Fumes / 5 mg /cu.meter Supplier Name and Address: Product Name: New England Emulsions Corp. 201 Lowland St. RS-1 Asphalt Emulsion (TACK COAT) SECTION 1 - PRODUCT IDENTIFICATION AND USE MATERIAL SAFETY DATA SHEET SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIALS Ingredient Name CAS Number Concentration (%) Exposure Limits / Health Hazards (508) 429 - 5550 1-800-424-9300 SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES Specific Gravity (H 2 O=1): 1.01 @ 60 ˚F N/A / N/A 0 - 3 68476-30-2 Petroleum Distillate Brownish Liquid Melting Point: Evaporation Rate: Boiling Point: Vapor Pressure: Vapor Density (Air=1): 212 ˚F Solubility In Water: 0.62 24 @ 77 ˚F Readily Soluble in Water Avoid contact with strong oxidizers. Avoid excessive heat, formation of vapors or mists. Stable Flash Point: Appearance and Odor: Auto Ignition Temp: N/A N/A Normal Combustions forms carbon dioxide, water vapor, and oxides of sulfur and nitrogen. Incomplete combustion can produce carbon monoxide. May foam if heated above 212 ˚F or mixed with other materials in excess of 212 ˚F. N/A Special Procedures: N/A N/A No Data SECTION 4 - FIRE AND EXPLOSION HAZARD Lower Flammable Limit: Upper Flammable Limit: Stability: Incompatibility w/ Other Substances: CO 2 , Dry Chemical, Foam, Water Fog Use NIOSH Approved Self Contained Breathing Apparatus for enclosed or confined areas. Health = 0, Flammability = 1, Reactivity = 0 NFPA Rating: Unusual Fire and Explosion Hazards: Extinguishing Media: SECTION 5 - REACTIVITY DATA Conditions to Avoid: Hazardous Polymerization: Page 1 of 2 Revised: April, 2004

Transcript of NEW ENGLAND EMULSIONS CORP. - asmg. · PDF fileNEW ENGLAND EMULSIONS CORP. ... (TACK COAT)...

Page 1: NEW ENGLAND EMULSIONS CORP. - asmg. · PDF fileNEW ENGLAND EMULSIONS CORP. ... (TACK COAT) SECTION 1 - PRODUCT IDENTIFICATION AND USE ... state, and federal guidelines

NEW ENGLAND EMULSIONS CORP.201 LOWLAND STREET PHONE: 508-429-5550HOLLISTON, MA. FAX: 508-429-423701746

Phone:Emergency:

Will Not Occur

Hazardous Decomposition Products:

Petroleum Asphalt 8052-42-4 55 - 65

Holliston, MA 01746

Asphalt Fumes / 5 mg /cu.meter

Supplier Name and Address:

Product Name:

New England Emulsions Corp.201 Lowland St.

RS-1 Asphalt Emulsion (TACK COAT)

SECTION 1 - PRODUCT IDENTIFICATION AND USE

MATERIAL SAFETY DATA SHEET

SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIALS

Ingredient Name CAS Number Concentration (%) Exposure Limits / Health Hazards

(508) 429 - 55501-800-424-9300

SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES

Specific Gravity (H2O=1): 1.01 @ 60 ˚F

N/A / N/A0 - 368476-30-2Petroleum Distillate

Brownish Liquid

Melting Point:Evaporation Rate:

Boiling Point:Vapor Pressure:Vapor Density (Air=1):

212 ˚F

Solubility In Water:0.6224 @ 77 ˚F

Readily Soluble in Water

Avoid contact with strong oxidizers.Avoid excessive heat, formation of vapors or mists.

Stable

Flash Point:

Appearance and Odor:

Auto Ignition Temp:N/A

N/A

Normal Combustions forms carbon dioxide, water vapor, and oxides of sulfur and nitrogen. Incomplete combustion can produce carbon monoxide.

May foam if heated above 212 ˚F or mixed with other materials in excess of 212 ˚F.

N/A

Special Procedures:

N/A

N/A

No Data

SECTION 4 - FIRE AND EXPLOSION HAZARD

Lower Flammable Limit:Upper Flammable Limit:

Stability:

Incompatibility w/ Other Substances:

CO2, Dry Chemical, Foam, Water FogUse NIOSH Approved Self Contained Breathing Apparatus for enclosed or confined areas.Health = 0, Flammability = 1, Reactivity = 0NFPA Rating:

Unusual Fire and Explosion Hazards:

Extinguishing Media:

SECTION 5 - REACTIVITY DATA

Conditions to Avoid:Hazardous Polymerization:

Page 1 of 2Revised: April, 2004

Page 2: NEW ENGLAND EMULSIONS CORP. - asmg. · PDF fileNEW ENGLAND EMULSIONS CORP. ... (TACK COAT) SECTION 1 - PRODUCT IDENTIFICATION AND USE ... state, and federal guidelines

Health Hazards (Acute Exposure):

Health Hazards (Chronic Exposure):

Inhalation:

Ingestion:

Eye:

Skin:

Gloves:Eye:Respiratory:Footwear:Clothing:Ventilation:

Minor skin irritation. Fumes irritating to eyes and respiratory tract.

Prolonged or repeated contact with skin may be harmful.

No DataNo Data

SECTION 6 - HEALTH HAZARD DATA & FIRST AID

Route of Entry:

Carcinogenicity: Tetatogenicity:Mutagenicity:Reproductive Toxicity:

Eyes, Skin Contact, Inhalation

No Data

MATERIAL SAFETY DATA SHEET

Waste Disposal:

Handling and Storage:

Use sand, earth, or absorbent to contain spill. Keep from waterways and sewers. Pump spilled material into containers if possible. Soak up remaining material with absorbent material.Recovered liquid may be utilized, consult manufacturer. Dispose of absorbed or contaminated material at an approved waste disposal site according to local, state, and federal guidelines.Keep containers sealed when not in use. Mix well before using. Keep from freezing. Do not heat over 200 ˚F.

Chemical goggles should be worn at all times.Use NIOSH approved organic vapor cartridge respirator if ventilation is not sufficient.Contact minimized by wearing impervious boots or shoes.Contact minimized by wearing impervious clothing.

SECTION 8 - CONTROL MEASURES

Neoprene, vinyl, or other chemically impervious gloves.

Leak and Spill:

SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE

Flush with large amounts of water. Consult a physician.

Wash with soap and water. Do not use solvent or thinners.

Medical Conditions Generally Aggravated by Exposure:

May aggravate existing dermatitis.

Not expected to be acutely toxic. Remove to fresh air. Consult a physician.FIRST AID PROCEDURES

Not expected to be acutely toxic. Consult a physician.

Page 2 of 2Revised: April, 2004

No Data

Use in a well ventilated area.