NEW Elcometer 204, 304 & · PDF fileElcometer 204, 304 & 307 NEW Ultrasonic Thickness Gauges...

Material Thickness

elcometer.com 1

Measure up to 500mm (20”)with ±1% accuracy

Wide range of intelligent transducers

Rugged, fast and easy to use,no training required

[email protected]

®available with

wireless technology

compatible with

ElcoMaster®

™

• Display readings, statistics, run charts, bar graphs

• In thickness, differential or scan mode

• Measure using Pulsed Echo (PE), Echo Echo (EE), Echo Echo ThruPaint™ (EE),Interface Echo (IE), Plastic Mode (PLAS) or Speed of sound / Velocity Mode (VM)

Elcometer 204, 304 & 307NEW

Ultrasonic Thickness GaugesAccurate & easy to use material & precision thickness gauges

Material Thickness

elcometer.com2

Elcometer Material & Precision Thickness GaugesElcometer Material & Precision Thickness Gauges

The Elcometer 204, 304 & 307 ultrasonic material and precision thickness gauges are rugged, fast and incredibly easy to use.

Transfer data via USB or Bluetooth®

to ElcoMaster® PC or Mobile App for instantanalysis & reportgeneration

USB®

2 YEAR** WARRANTY

®available with

wireless technology

compatible with

ElcoMaster®

™

Elcometer 304 & 307: Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (3rd and 4th generation), iPad mini, iPad 2, and iPod touch (4th and 5th generation). “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod touch, iPhone, or iPad may affect wireless performance.

Display readings, selected statistics, bar graph, run chart or differential mode

Large, easy to read scratch and solvent resistant colour screen displays readings in Metric or Imperial units

Dust & waterproof rugged design equivalent to IP54

Integrated zero disc ensures accurate results

Automatic transducer recognition, ensures correct probe is identified when transducer is changed

Wide range of intelligent single & dual element transducers (see pages 9 & 13)

Measurement modes include: Pulsed Echo (PE)Echo Echo (EE)Echo Echo ThruPaint™ (EE)Interface Echo (IE) Plastic Mode (PLAS) Velocity Mode (VM)

Reading stability indicator to ensure reliable readings

Material Thickness

elcometer.com 3

Elcometer Material & Precision Thickness GaugesElcometer Material & Precision Thickness Gauges

Statistics

Display Modes

Create instant reports with ElcoMaster®

ElcoMaster® is a fast, easy to use PC & Mobile App for all your data management, reporting and quality assurance needs.

Simply connect either one of the Elcometer Ultrasonic Thickness Gauges to your PC, Android™ or iOS mobile device via Bluetooth® or USB & download your data for further analysis or instant report generation.*

Email

PDF

Cloud

ElcoMaster ®data management software

Elcometer has a wide range of single and dual element intelligent transducers available for use with the Elcometer 304 & 307. When connected to the gauge it instantly recognises which transducer has been attached.

When selecting a transducer it is important to choose one which will meet the specific application’s needs. The type of material to be tested, the measurement range, the shape of the substrate (curved or flat) and the size of the material should be considered when selecting the appropriate transducer.

For more information please see pages 9 & 13.

Dual Element

Single Element

* Model dependent.** Elcometer 204, 304 & 307 gauges are supplied with a one year warranty against manufacturing defects. Gauge warranty can be extended to two years via www.elcometer.com.

Intelligent Dual & Single Element Transducers

Bar Graph

Run Chart

Differential Mode

Scan Mode

Material Thickness

elcometer.com4

Steel Ultrasonic Material Thickness GaugeElcometer 204 Steel Ultrasonic Material Thickness GaugeElcometer 204

Pre-calibrated for ease of use, the Elcometer 204 steel ultrasonic thickness gauge provides fast, accurate measurement of the thickness of steel.

compatible with

ElcoMaster®

STANDARDS:ASTM E 797, EN 14127, EN 15317

PEPulsed Echo

Measures steel thickness from 0.63mm up to 500mm (0.025 - 20”)

Pre-set reading rate of 4Hz (4 readings per second) provides faster readings Measures the material

thickness when there is access to only one side

Integrated zero disc, ensures maximum accuracy

Transfer live readings via USB to ElcoMaster®

Supplied with everything required for use

Pre-calibrated for measuring steel only

Intelligent transducer attached with auto recognition, ensures correct probe is identified when transducer is changed

The Elcometer 204 is supplied with a 5MHz ¼” Potted Right Angle Dual Element Thickness Transducer

new

Material Thickness

elcometer.com 5

Steel Ultrasonic Material Thickness Gauge Elcometer 204Steel Ultrasonic Material Thickness Gauge Elcometer 204

Key Features Explained

• Displays key statisticsIn addition to the material thickness measurement, the Elcometer 204 displays key statistical values required to assess the overall material thickness; number of readings (n), the average material thickness (x), the lowest (Lo) and highest (Hi) material thickness, the standard deviation (σ) and the coefficient of variation (CV%).

• Zero Point calibration for accuracyThe Elcometer 204 has zero point calibration, ensuring accurate thickness measurements on steel surfaces.

• Live data output to PCAs each measurement is taken, the Elcometer 204 transmits the thickness values via USB straight into an inspection application or into ElcoMaster®, for instant report generation.

Ideal for measuring uncoated steel materials.

Ideal for measuring steel pipes where there is only access to one side.

_

Part Number Description Certificate

C204C-TXC Elcometer 204 Steel Ultrasonic Material Thickness Gauge with 5MHz ¼” Right Angle Dual Element Transducer ●

Transducer Probe Type Dual ElementMeasurement Mode Pulsed Echo (PE)Range1 & Accuracy2 0.63 - 500mm

(0.025 - 20”)±0.1mm (0.63-19.99mm)±0.5% (20.00-500.00mm)

±0.004” (0.025-0.787”)±0.5% (0.788-20.00”)

Resolution 0.1mm (0.01”) Reading Rate 4Hz (4 readings per second)Operating Temperature -10 to 50°C (14 to 122°F)Data Output USB Power Supply 2 x AA batteries Battery Life3 Alkaline: 15 hours Lithium: 28 hoursGauge Weight 210g (7.4oz) - including batteries, without transducer Gauge Dimensions 145 x 73 x 37mm (5.7 x 2.87 x 1.46”), without transducer

Packing List Elcometer 204 steel ultrasonic material thickness gauge, transducer, ultrasonic couplant, carry pouch, screen protector, wrist harness, 2 x AA batteries, operating instructions, calibration certificate & 2 year warranty extension card.

Technical Specification C

1 Dependent on material being measured & transducer being used. 2 On steel. 3 Approximate battery life, when in continuous reading mode at a reading rate of 4Hz. Rechargeable batteries may differ. ● Calibration Certificate supplied as standard.

Material Thickness

elcometer.com6

Ultrasonic Material Thickness GaugeElcometer 304

2-Point, 1-Point, Material, Velocity, Thickness Set & Factory calibration options, allows accurate measurements of a wide range of materials

The Elcometer 304 ultrasonic material thickness gauge is ideal for measuring the material thickness or material sound velocity of virtually any material such as metals, plastics, glass, epoxies & ceramics in a wide range of applications.

STANDARDS:ASTM E 797, EN 14127, EN 15317

PEPulsed Echo

VMVelocity Mode

EEEcho Echo

ThruPaint™

®available with

wireless technology

compatible with

ElcoMaster®

™

Elcometer 304: Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (3rd and 4th generation), iPad mini, iPad 2, and iPod touch (4th and 5th generation). “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod touch, iPhone, or iPad may affect wireless performance.

Stores up to 100,000 readings in up to 1,000 sequential batches for further analysis & downloading to a PC or mobile device

Up to 3 programmable calibration memories, allows the user to select a saved calbration method without the need to recalibrate the gauge

Selectable reading rate of 4, 8, 16Hz (4, 8, 16 readings per second)

Scan mode at 16Hz, ideal for measuring a large surface area

The Elcometer 304 is supplied as a gauge only, without transducer.

Transducers must be ordered separately.

(Wide range of transducers available - see page 9-9)

USB & Bluetooth® data output to ElcoMaster® PC or ElcoMaster® Mobile App for instant report generation


Integrated zero disc, ensures maximum accuracy

Hi & Lo limit indicators provides indication of problem areas

new

Material Thickness

elcometer.com 7

Ultrasonic Material Thickness Gauge Elcometer 304

Key Features Explained• Measures uncoated & coated surfaces

Flexible & easy to use, the Elcometer 304 doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ mode (EE), coatings up to 2mm (80mils) are ignored.

• Choose & customise the reading displayThe Elcometer 304 has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, Selected Statistics, Bar Graph, Run Chart & Differential Mode.

• User definable limits for pass/fail indicationLimits can be set on the Elcometer 304 for individual readings or for each batch with audible & visual pass/fail warnings.

• Store each measurement for further analysisUp to 100,000 readings can be saved into the gauge memory as each measurement is taken, which can be downloaded later into an inspection application or into ElcoMaster® for further analysis and reporting.

• Data output to PC, Android™ or iOS† mobile deviceConnect the Elcometer 304 via Bluetooth® or USB to a PC, Android™ or iOS† mobile device & download the data into an inspection application or into ElcoMaster® for instant report generation.

Ideal for measuring uncoated steel materials.

Ideal for measuring the material thickness of coated materials, ignoring the paint thickness (EE mode).

Part Number Description CertificateC304CDL Elcometer 304 Ultrasonic Material Thickness Gauge ●

Transducer Probe Type Dual ElementMeasurement Mode Range1 Accuracy2

Pulsed Echo (PE) 0.63 - 500mm (0.025 - 20.00”)

±0.05mm (0.63-9.99mm)±0.5% (10.00-500.00mm)

±0.004” (0.025-0.393”)±0.5% (0.394-20.00”)

Echo Echo ThruPaint™ (EE) 2.54 - 20.00mm (0.100-0.787”)

±0.05mm (2.54-9.99mm)±0.5% (10.00-20.00mm)

±0.004” (0.100-0.393”)±0.5% (0.394-0.787”)

Velocity Mode (VM) 1,250-10,000 m/s (0.0492 - 0.3937in/µs)Resolution 0.1mm (0.01”) or 0.01mm (0.001”) switchableReading Rate 4, 8 & 16Hz (4, 8 & 16 readings per second)Operating Temperature -10 to 50°C (14 to 122°F)Data Output USB & Bluetooth®

Power Supply 2 x AA batteries Battery Life3 Alkaline: 15 hours Lithium: 28 hoursGauge Weight 210g (7.4oz) - including batteries, without transducer Gauge Dimensions 145 x 73 x 37mm (5.7 x 2.87 x 1.46”), without transducer

Packing List Elcometer 304 Ultrasonic Material Thickness Gauge, ultrasonic couplant, plastic transit case, carry pouch, 3 x screen protectors, wrist harness, 2 x AA batteries, operating instructions, calibration certificate, 2 year warranty extension card, ElcoMaster® software CD & USB cable.


1 Dependent on material being measured & transducer being used. † Compatible with iPod, iPhone and iPad.2 On steel. 3 Approximate battery life, when in continuous reading mode at a reading rate of 4Hz. Rechargeable batteries may differ. ● Calibration Certificate supplied as standard.

Material Thickness

elcometer.com8

Material Thickness GaugesElcometer 204 & 304

Product Features

Model Elcometer 204 Elcometer 304Part Number C204C-TXC C304CDLEasy to use menu structure in multiple languages ■ ■Tough, impact, waterproof & dust resistant; equivalent to IP54 ■ ■Bright colour screen; with automatic or manual brightness adjustment ■ ■Scratch and solvent resistant display; 2.4" (6cm) TFT ■ ■Large positive feedback buttons ■ ■USB power supply via PC ■ ■Gauge software updates1 via ElcoMaster® Software ■ ■Data Output

USB; to PC ■ ■Bluetooth®; to PC, AndroidTM & iOSǂ devices ■ElcoMaster ® PC software ■

2 year gauge warranty2 ■ ■Limits; 40 definable audible & visual pass/fail warnings ■Auto transducer recognition & ‘V-path’ correction ■ ■Reading Rate 4Hz 4, 8, 16Hz3

Measurement Mode Range4 Accuracy5

Pulsed Echo (PE) 0.63-500mm (0.025-20”)

±0.1mm (0.63-19.99mm)±0.5% (20.00-500.00mm)

±0.004” (0.025-0.787”)±0.5% (0.788-20.00”) ■

Pulsed Echo (PE) 0.63-500mm (0.025-20”)

±0.05mm (0.63-9.99mm)±0.5% (10.00-500.00mm)

±0.004” (0.025-0.393”)±0.5% (0.394-20.00”) ■

Echo Echo ThruPaint™ (EE) 2.54-20.00mm (0.100-0.787”)

±0.05mm (2.54-9.99mm)±0.5% (10.00-20.00mm)

±0.004” (0.100-0.393”)±0.5% (0.394-0.787”) ■

Velocity Mode (VM) 1,250-10,000m/s (0.0492 - 0.3937in/µs) ■

Measurement Units; mm or inches ■ ■m/s, inch/µs ■

Repeatability / Stability Indicator ■ ■ Display Modes

Reading ■ ■Selected statistics, Scan thickness bar graph, Run Chart,Readings & Differential (from nominal) ■

Selectable Reading ResolutionLo; 0.1mm (0.01 inch), 10m/s (0.001 in/μs) ■ ■Hi; 0.01mm (0.001 inch), 1m/s (0.0001 in/μs) ■

Statistics Number of readings (n), Mean (average) (x), Standard deviation (σ), Lowest reading (Lo), Highest reading (Hi), Coefficient of Variation (CV%) ■ ■

Low / High limit value, Reading Range Value, Nominal Value, Number of readings below low limit, Number of readings above high limit ■

Calibration OptionsZero (using the integrated zero disc) ■ ■1-Point & 2-Point ■Material selection; 39 preset materials (see list on page 9-15) ■Factory; resets to the factory calibration ■Velocity (speed of sound) ■Known Thickness Value ■

_

Material Thickness

elcometer.com 9

Material Thickness Gauges Elcometer 204 & 304

Model Elcometer 204 Elcometer 304Calibration Features

Calibration memories; 3 programmable memories with optional PIN calibration lock ■Measurement outside calibration warning ■

Data Logging 100,000 readings in 1,000 alphanumeric batches ■Fixed Batch Size mode; with batch linking ■Date & time stamp, Review, Clear & Delete batches ■Batch review graph ■

Part Number DescriptionT92024911 Dual Element Transducer Adaptor

Dual Element Thickness Transducers

This adaptor allows dual element, ‘non-intelligent’ and other transducers with Lemo Connectors from Elcometer and other manufacturers to be used with the Elcometer 204 & 304. For a full list of transducers, please visit our website www.elcometer.com.

Transducer Adaptor

* HD - Highly damped transducer CT - Damped coating thickness transducer S - Standard undamped transducer 1 Internet connection required. ǂVisit www.elcometer.com/sdk to find out how to integrate Elcometer’s MFi certified products to your App.2 Elcometer 204 & 304 gauges are supplied with a one year warranty against manufacturing defects. The warranty can be extended to two years via www.elcometer.com.

3 User selectable, default setting in scan mode is 16Hz. 4 Dependent on the material being measured and the transducer being used. 5 On steel.

†

Suitable for measuring Suitable for

Part Number Description Dam

ping

Hi T

emp

Thru

Pain

t™C

ast I

ron

Plas

tics

Thin

Pla

stic

s G

lass

Fib

reTh

in G

lass

Fib

reSt

eel

Gla

ssAl

umin

ium

Tita

nium

Elco

met

er 3

04

TXC1M00EP-2 1.00 MHz ½” Diameter Transducer S ■ ■ ■ ■

TXC2M25CP-2 2.25 MHz ¼” Diameter Transducer S ■ ■ ■ ■


TXC3M50EP-1 3.50 MHz ½” Diameter Transducer CT,HD ■ ■ ■ ■ ■

TXC5M00BP-4 5.00 MHz ” Diameter Transducer CT,HD ■ ■ ■ ■ ■


TXC5M00CP-6 5.00 MHz ¼” Diameter Transducer CT,HD ■ ■ ■ ■ ■

TXC5M00CP-8 5.00 MHz ¼” Diameter Transducer HD ■ ■ ■ ■ ■ ■


TXC5M00EP-4 5.00 MHz ½” Diameter Transducer CT,HD ■ ■ ■ ■ ■

TXC7M50BP-3 7.50 MHz ” Diameter Transducer CT,HD ■ ■ ■ ■ ■ ■

TXC7M50CP-4 7.50 MHz ¼” Diameter Transducer S ■ ■ ■ ■ ■

TXC7M50CP-5 7.50 MHz ¼” Diameter Transducer CT,HD ■ ■ ■ ■ ■ ■

TXC10M0BP-1 10.0 MHz ” Diameter Transducer S ■ ■ ■ ■


When selecting a transducer it is important to choose one which will meet the specific application’s needs. The type of material to be tested, the measurement range, the shape of the substrate (curved or flat) and the size of the material should be considered when selecting the appropriate transducer. All part numbers starting with ‘TXC’ are Potted Right Angle transducers and are supplied with a calibration certificate.

*

Material Thickness

elcometer.com10

Ultrasonic Precision Thickness GaugeElcometer 307

The Elcometer 307 ultrasonic precision thickness gauge is designed to provide accurate measurements of thin materials.

STANDARDS:EN 14127, EN 15317

EEEcho Echo

IEInterface Echo

PLASPlastic

®available with

wireless technology

compatible with

ElcoMaster®

™

Elcometer 307: Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (3rd and 4th generation), iPad mini, iPad 2, and iPod touch (4th and 5th generation). “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod touch, iPhone, or iPad may affect wireless performance.

Stores up to 100,000 readings in up to 1,000 sequential batches for further analysis & downloading to a PC or mobile device

Up to 3 programmable calibration memories, allows the user to select a saved calbration method without the need to recalibrate the gauge

Selectable reading rate of 4, 8, 16Hz (4, 8, 16 readings per second)

Scan mode at 16Hz, ideal for measuring a large surface area

The Elcometer 307 is supplied with or without a 15MHz ¼” Microdot Right Angle Single Element Thickness Transducer.

(Wide range of transducers available - see page 9-13)


USB & Bluetooth® data output to ElcoMaster® PC or ElcoMaster® Mobile App for instant report generation

2-Point, 1-Point, Material, Velocity, Thickness Set & Factory calibration options, allows accurate measurements of a wide range of materials

Hi & Lo limit indicators provides indication of problem areas

new

Material Thickness

elcometer.com 11

Ultrasonic Precision Thickness Gauge Elcometer 307

Part Number Description CertificateC307CDL Elcometer 307 Ultrasonic Precision Thickness Gauge ●

C307CDL-TXC Elcometer 307 Ultrasonic Precision Thickness Gauge with 15MHz ¼” Microdot Right Angle Single Element Transducer ●

Transducer Probe Type Single ElementMeasurement Mode Range1 Accuracy2

Interface Echo (IE) 1.65 - 25.40mm (0.065 - 1.00”)

±0.015mm (1.65-2.99mm)±0.5%(3.00-25.4mm)

±0.0006” (0.065 0.117”)±0.5% (0.118-1.000”)

Echo Echo (EE) 0.15 - 10.15mm (0.006 - 0.400”)

±0.015mm (0.15-2.99mm)±0.5% (3.00-10.15mm)

±0.0006” (0.006-0.117”)±0.5% (0.118-0.400”)

Plastic Mode (PLAS) 0.15 - 5.00mm (0.006 - 0.197”)

±0.015mm (0.15-2.99mm)±0.5% (3.00-5.00mm)

±0.0006” (0.006-0.117”)±0.5% (0.118-0.197”)

Resolution 0.1mm (0.01”) or 0.01mm (0.001”) switchableReading Rate 4, 8 & 16Hz (4, 8 & 16 readings per second)Operating Temperature -10 to 50°C (14 to 122°F)Data Output USB & Bluetooth®

Power Supply 2 x AA batteries Battery Life3 Alkaline: 15 hours Lithium: 28 hours Gauge Weight 210g (7.4oz) - including batteries, without transducer Gauge Dimensions 145 x 73 x 37mm (5.7 x 2.87 x 1.46”),without transducer Packing List Elcometer 307 Ultrasonic Precision Thickness Gauge, 15MHz transducer

(C307CDL-TXC only) ultrasonic couplant, carry pouch, 3 x screen protectors, wrist harness, 2 x AA batteries, user guide, plastic transit case, calibration certificate, 2 year warranty extension card, ElcoMaster® software CD & USB cable.


Key Features Explained• Measures thin materials with pinpoint accuracy

Flexible & easy to use, the Elcometer 307 has a measurement range of 0.15mm (0.006”) to 25.40mm (1.000”) with ±1% accuracy, across three measurement modes; Interface Echo (IE), Echo Echo (EE) & Plastic mode (PLAS).

• Choose & customise the reading displayThe Elcometer 307 has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, Selected Statistics, Bar Graph, Run Chart & Differential Mode.

• User definable limits for pass/fail indicationLimits can be set on the Elcometer 307 for individual readings or for each batch with audible & visual pass/fail warnings.

• Store each measurement for further analysisUp to 100,000 readings can be saved into the gauge memory as each measurement is taken, which can be downloaded later into an inspection application or into ElcoMaster® for further analysis and reporting.

• Data output to PC, Android™ or iOS† mobile deviceConnect the Elcometer 307 via Bluetooth® or USB to a PC, Android™ or iOS† mobile device & download the data into an inspection application or into ElcoMaster® for instant report generation.

Ideal for measuring the material thickness of thinner materials such as plastics.

Ideal for measuring the material thickness of thinner sheets of uncoated metal and other thin, metal substrates.

1 Dependent on material being measured & transducer being used. † Compatible with iPod, iPhone and iPad.2 On steel. 3 Approximate battery life, when in continuous reading mode at a reading rate of 4Hz. Rechargeable batteries may differ. ● Calibration Certificate supplied as standard.

Material Thickness

elcometer.com12

Precision Thickness GaugeElcometer 307

Product Features

Model Elcometer 307Precision Thickness Gauge C307CDLPrecision Thickness Gauge with 15MHz ¼” Single Element Transducer C307CDL-TXCEasy to use menu structure in multiple languages ■Tough, impact, waterproof & dust resistant; equivalent to IP54 ■Bright colour screen; with automatic or manual brightness adjustment ■Scratch and solvent resistant display; 2.4" (6cm) TFT ■ Large positive feedback buttons ■USB power supply via PC ■Gauge software updates1 via ElcoMaster® Software ■Data Output

USB; to PC ■Bluetooth®; to PC, AndroidTM & iOSǂ devices ■ElcoMaster ® PC software ■

2 year gauge warranty2 ■Limits; 40 definable audible & visual pass/fail warnings ■Auto transducer recognition ■Measurement Rate 4, 8, 16Hz3

Measurement Mode Range4 Accuracy5

Interface Echo (IE) 1.65-25.40mm(0.065-1.000”)

±0.015mm (1.65-2.99mm)±0.5%(3.00-25.40mm)

±0.0006” (0.065 0.117”)±0.5% (0.118-1.000”) ■

Echo Echo (EE) 0.15 - 10.15mm (0.006 - 0.400”)

±0.015mm (0.15-2.99mm)±0.5% (3.00-10.15mm)

±0.0006” (0.006-0.117”)±0.5% (0.118-0.400”) ■

Plastic Mode (PLAS) 0.15 - 5.00mm (0.006 - 0.197”)

±0.015mm (0.15-2.99mm)±0.5% (3.00-5.00mm)

±0.0006” (0.006-0.117”)±0.5% (0.118-0.197”) ■

Measurement Units; mm or inches ■m/s, inch/µs ■

Repeatability / Stability Indicator ■ Display Modes ■

Reading ■Selected statistics, Scan thickness bar graph, Run Chart,Readings & Differential (from nominal) ■

Selectable Reading ResolutionLo; 0.1mm (0.01 inch), 10m/s (0.001 in/μs) ■Hi; 0.01mm (0.001 inch), 1m/s (0.0001 in/μs) ■

Statistics Number of readings (n), Mean (average) (x), Standard deviation (σ), Lowest reading (Lo), Highest reading (Hi), Coefficient of Variation (CV%) ■

Low / High limit value, Reading Range Value, Nominal Value, Number of readings below low limit, Number of readings above high limit ■

Calibration Options1-Point & 2-Point ■Material selection; 39 preset materials (see list on page 9-15) ■Factory; resets to the factory calibration ■Velocity (speed of sound) ■Known Thickness Value ■

_

Material Thickness

elcometer.com 13

Precision Thickness Gauge Elcometer 307

* S - Standard undamped transducer 1 Internet connection required. ǂ Visit www.elcometer.com/sdk to find out how to integrate Elcometer’s MFi certified products to your App.2 Elcometer 307 gauges are supplied with a one year warranty against manufacturing defects. The warranty can be extended to two years via www.elcometer.com.

3 User selectable default setting in scan mode is 16Hz. 4 Dependent on the material being measured and the transducer being used. 5 On steel.

Suitable for measuring

Part Number Description Dam

ping

Thin

Pla

stic

s

Stee

l

Alum

iniu

m

Tita

nium

TXC15M0CM 15.0 MHz ¼” Diameter Transducer S ■ ■ ■ ■TXC20M0CM 20.0 MHz ¼” Diameter Transducer S ■ ■ ■ ■

Single Element Transducers

Delay Lines

Part Number Description Diameter LengthT92016528 Acrylic Delay Line ¼” 9mmT92016529 Acrylic Delay Line ¼” 12mmT92023853-4 Graphite Delay Line ¼” ”

When selecting a transducer it is important to choose one which will meet the specific application’s needs. The type of material to be tested, the measurement range, the shape of the substrate (curved or flat) and the size of the material should be considered when selecting the appropriate transducer. All part numbers starting with ‘TXC’ are Microdot Right Angle transducers and are supplied with a calibration certificate.

Part Number DescriptionT92025657 Single Element Transducer Adaptor

This adaptor allows single element, ‘non-intelligent’ and other transducers with Lemo Connectors from Elcometer and other manufacturers to be used with the Elcometer 307 product range. For a full list of transducers, please visit our website www.elcometer.com.

Transducer Adaptor

Each single element transducer is supplied complete with 9mm and 12mm acrylic delay lines suitable for measuring on steel, aluminium and titanium. If measuring on thin plastics using Plastic Mode (PLAS), a graphite delay line must be used. These are available to purchase as optional accessories.

Acrylic Delay Line

Graphite Delay Line

*

Model Elcometer 307Calibration Features

Calibration memories; 3 programmable memories with optional PIN calibration lock ■Measurement outside calibration warning ■

Data Logging 100,000 readings in 1,000 alphanumeric batches ■Fixed batch size mode; with batch linking ■Date & time stamp, Review, Clear & Delete batches ■Batch review graph ■

Material Thickness

elcometer.com14

AccessoriesElcometer 204, 304 & 307

Calibration standards are available as a set or individually, allowing users to select the most appropriate thickness for their application. Elcometer calibration standards are manufactured from 4340 steel to a tolerance of ± 0.1% of the nominal thickness and are supplied complete with calibration certificates.

Part Number Description

T920CALSTD-SET1Calibration standard set; Nominal Thickness 2-30mm (0.08-1.18”)1,2

Comprising of; 2, 5, 10, 15, 20, 25 & 30mm (0.08, 0.20, 0.39, 0.59, 0.79, 0.98 & 1.18”), complete with holder & calibration certificate.

T920CALSTD-SET2Calibration standard set; Nominal Thickness 40-100mm (1.57-3.94”)1,2

Comprising of; 40, 50, 60, 70, 80, 90 & 100mm (1.57, 1.97, 2.36, 2.76, 3.15, 3.54 & 3.94”), complete with holder & calibration certificate.

T920CALSTD-HLD Calibration Holder; for thicknesses up to 100mm (3.94”).T920CALSTD-2 Individual Calibration Standard, Nominal Thickness 2mm (0.078”)1 T920CALSTD-5 Individual Calibration Standard, Nominal Thickness 5mm (0.196”)1

T920CALSTD-10 Individual Calibration Standard, Nominal Thickness 10mm (0.393”)1












Calibration Standards

Elcometer supplies a viscous gel to work on both horizontal and vertical surfaces. The temperature range for regular couplant is -15 to 104°C (5 to 220°F). The Elcometer high temperature gel has a range of up to 398°C (750°F) for use with high temperature transducers.

Part Number Description Part Number Description

T92015701 Ultrasonic Couplant; 120ml (4fl oz) T92015701-5 Ultrasonic Couplant; 120ml

(4fl oz), Pack of 5 Bottles

T92024034-7 Ultrasonic Couplant; 300ml (10fl oz) T92024034-8 Ultrasonic Couplant;

500ml (17fl oz)

T92024034-3 Ultrasonic Couplant; 3.8 litres (1 US Gallon) T92024034-9 High Temperature Couplant*;

60ml (2fl oz)

T92024034-10 High Temperature Couplant*; 60ml (2fl oz), Pack of 2

Ultrasonic Couplant

1 Imperial values for information purposes only. Calibration standards are manufactured and measured in millimetres.2 Elcometer 307 nominal thickness is only 2 - 25mm. *For use with high temperature transducers up to 398°C (750°F)

Material Thickness

elcometer.com 15

Elcometer Material Number

Material Description (Chemical Symbol/

Grouping)

Material Name Sound Velocity(m/sec)

Sound Velocity(in/μsec)

Source of Value NPL = National Physics

Laboratory ASNT = The American Society

for Non destructive Testing Industry = Industry knowledge

1 Fe Iron (soft) 5960 0.235 NPL

2 Fe Iron Cast 4990 0.196 NPL

3 Al Aluminium (7075-T6) 6350 0.250 ASNT

4 Ti Titanium 6100 0.240 ASNT

5 Mg Magnesium 5790 0.228 ASNT

6 Ni Nickel 5630 0.222 ASNT

7 W Tungsten 5180 0.204 ASNT

8 Cu Copper 4660 0.183 ASNT

9 Zn Zinc 4190 0.165 NPL

10 Ag Silver 3600 0.142 Industry

11 Sn Tin 3380 0.133 NPL

12 Pt Platinum 3260 0.128 NPL

13 Au Gold 3240 0.128 NPL

14 Cd Cadmium 2780 0.109 NPL

15 Bi Bismuth 2180 0.086 Industry

16 Pb Lead 2160 0.085 ASNT

17 Cobalt-chromium Alloy Stellite 6990 0.275 Industry

18 Iron Alloy Steel (Carbon 1018) 5920 0.233 Industry

19 Iron Alloy Steel (Alloy 4340) 5850 0.230 Industry

20 Nickle-chromium Alloy Inconel (625) 5820 0.229 Industry

21 Silver Alloy Stainless Steel, (Austentic 304) 5660 0.233 ASNT

22 Copper Alloy Constantan 5180 0.204 NPL

23 Non-metal German Silver 4760 0.187 Industry

24 Non-metal Brass (Naval) 4430 0.174 ASNT

25 Non-metal Glass (Quartz) 5930 0.233 ASNT

26 Non-metal Glass (Crown) 5660 0.223 NPL

27 Non-metal Glass (Flint) 5260 0.207 NPL

28 Non-metal Porcelain 5840 0.230 Industry

29 Non-metal Plexiglas 2760 0.109 Industry

30 Non-metal Glass Fibre 2740 0.108 Industry

31 Non-metal Nylon 2680 0.106 NPL

32 Non-metal Epoxy Resin 2540 0.100 Industry

33 Non-metal Polystyrene 2350 0.093 NPL

34 Non-metal PVC 2330 0.092 NPL

35 Non-metal Rubber (Butyl) 1830 0.072 Industry

36 Non-metal Rubber (Natural) 1600 0.063 NPL

37 Non-metal Polyurethane 1780 0.070 Industry

38 Non-metal Teflon 1400 0.055 NPL

39 Non-metal Water 1490 0.059 ASNT

Velocity Chart for the preset choice of 39 materials in the Elcometer 304 & 307

Material & Precision Thickness Gauges Elcometer 304 & 307

Material Thickness

elcometer.com16

Elcometer 304 & 307: Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (3rd and 4th generation), iPad mini, iPad 2, and iPod touch (4th and 5th generation). “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Suitable for mobile devices running Android™ software version 2.1 and upwards. Android™ and Google Play are trademarks of Google Inc . Elcometer and ElcoMaster® are registered trademarks of Elcometer Limited. ThruPaint™ is a trademark of Elcometer Limited. All other trademarks acknowledged.

Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.

© Elcometer Limited, 2016. All rights reserved. No part of this document may be reproduced, transmitted, stored (in a retrieval system or otherwise), or translated into any language, in any form, or by any means, without the prior written permission of Elcometer Limited.

SLI-0070 Issue 1

elcometer.be • elcometer.fr • elcometer.deelcometer.nl • elcometer.jp • elcometer.com.sg

ENGLANDElcometer LimitedManchester M43 6BUTel: +44 (0)161 371 6000Fax: +44 (0)161 371 [email protected] www.elcometer.com

BELGIUMElcometer SATel: +32 (0)4 379 96 10Fax: +32 (0)4 374 06 [email protected]

FRANCEElcometer SarlTel: +33 (0)2 38 86 33 44Fax: +33 (0)2 38 91 37 [email protected] www.elcometer.fr

GERMANYElcometer Instruments GmbHTel: +49(0)7361 52806 0Fax: +49(0)7361 52806 [email protected]

THE NETHERLANDSElcometer B.V.Tel: +31 (0)30 259 1818Fax: +31 (0)30 210 [email protected]

JAPANElcometer KKTel: +81-(0)3-6869-0770Fax: +81-(0)[email protected]

REPUBLIC OF SINGAPOREElcometer (Asia) Pte LtdTel: +65 6462 2822Fax: +65 6462 [email protected]

UNITED ARAB EMIRATESEL Inspection & Blasting Equipment LLCTel: +971 4 295 0191Fax: +971 4 295 [email protected]

USA MICHIGANElcometer IncTel: +1 248 650 0500Toll Free: 800 521 0635Fax: +1 248 650 [email protected]

TEXASElcometer of HoustonTel: +1 713 450 0631Toll Free: 800 521 0635Fax: +1 713 450 [email protected]

NEW Elcometer 204, 304 & · PDF fileElcometer 204, 304 & 307 NEW Ultrasonic Thickness Gauges...

Documents

Transcript of NEW Elcometer 204, 304 & · PDF fileElcometer 204, 304 & 307 NEW Ultrasonic Thickness Gauges...