7/27/2019 New Digital ESC.pdf

http://slidepdf.com/reader/full/new-digital-escpdf 1/2

7/27/2019 New Digital ESC.pdf

http://slidepdf.com/reader/full/new-digital-escpdf 2/2

 

POWER HD Program Card is easy to use for programming all of the POWER HD ESCs, it is smaller than a name card.From now on,

you no longer need program the ESCs with complex tones and throttle . It is portable and ruggedized, it is your convenience choice.

Specification of POWER HD Program Card

Size: 50mm X 85mm X 4mm

Weight: 21 grams

Use the Program Card

1. Dial the toggle switches to the position you expected.

2. Connect the ESC with motor, and plug in the JR head of ESC to the Program Card.

3.Power on the ESC. You will hear of the 3 beeps emitting from motor. It indicate that you have a right connection between the ESC

and the Program Card.

4.Press TRANSFER button (on the right bottom of Program Card). You will hear of 3 beeps from motor. it indicate that you are

successful to change the parameters of ESC.

5.That’s all, pull out the JR plug to receiver, re-power on the ESCs. you can fly now.

HuiDa RC International INC.

 Address:1707,Huashang Building,Xiapu district,Huizhou,Guangdong,China.

Tel:+86-752-2996569

Fax:+86-752-2118860

Web:http://www.chd.hk