11-704Standard7-Pole Plug

7-POLE PLUGS

Insertion and Pull-OutRequirements

Meets and exceeds all standards of SAE J560. Floating pins for ease of alignment and

maximum contact. Will accept the widest range of wire gauges,

from #16 wires to #8 ground wire. Tapered design fits comfortably and

conveniently for easy hand-position pull.Jumbo finger pull grips and two hang-upholes.

High-impact cycolac interior with extended lipfor easy removal and replacement.

Solid brass terminal screws. 40 amps continuous duty @ 6-28 VDC. WeatherBeater seal accommodates .450

minimum wire diameter.

NOTE: Pollak’s Terminal Pins are machined fromsolid brass bar stock unlike some competitors thatprovide unplated terminal pins stamped from sheetmetal. Brass terminals ensure minimum voltage dropand dielectric grease protects against corrosion andresistance.

NOTE: Pollak’s 7-Pole connectors are manufacturedfrom quality materials and will help reducemaintenance cost and down-time associated withelectrical failures.

11-910Weather-Beater Plugwith CableGuard

11-710Standard 7-PolePlug with CableGuard

11-702Standard 7-PolePlug with CableGuard

11-902Weather-BeaterPlug with CableGuard

11-762Rubber BootSeals against dust andmoisture, 2.5" long. For.460-.720 dia. cable, fits 11-852, 11-700, 11-900,11-704,11-904.

11-763Cable GuardPlated steel, 3.56"long, fits 11-700,11-704, 11-900,11-904, and11-852

ACCESSORIES

6

11-900Weather-Beater Plug

11-700Standard 7-Pole Plug

ZINCDIE-CAST

GLASSFILLED NYLON

11-904Weather-Beater

Plug

SOLID BRASSPINS

HOUSINGAVAILABLE IN ZINCDIE-CAST OR GLASS

FILLED NYLON

INTEGRAL LEAFSPRING

SOLID HIGH IMPACTCYCOLAC CONTACTRETAINER

CABLE LOCK

PLATED STEELRETAINER SCREW

HIGH STRENGTH CLOSE COILED ZINCPLATED SPRING STEEL CABLE GUARD

CONVENIENTHANG RING

MOISTURE RESISTANTWEATHER-BEATER SEAL

11-764Plug interior for11-700,11-702,11-704,11-710,11-900,11-902,11-904,11-910.Supplied with mountingscrew.

RECOMMENDED WIRE GAUGE

Auxiliary Circuit14Yellow7

Stop & Right Hand TurnSignal

14Brown6

Stop & Left Hand Turn Signal14Red5

Battery Charge10Black4

Tail, License and RunningLights

14Green3

Electric Brake12Blue2

Ground Return10White1

DescriptionGaugeColorNo.

Reefer (Tag) or Stop14Orange9

Auxiliary Circuit12Gray8

RECOMMENDED WIRE GAUGE

Back-Up, Auxiliary Ground or Circuit14Yellow7

Stop & Right Hand Turn Signal14Brown6

Stop & Left Hand Turn Signal14Red5

Battery Charge8Black4

Tail, License and Running Lights14Green3

Electric Brake12Blue2

Ground Return8White1

DescriptionGaugeColorNo.

12-707 with a 12-711U Bracket

12-705 Plug & Socket with 12-711U Bracket

Car-End Only Socket

Trailer-End Only Plug

Complete Set (12-707 and 12-706)12-705

12-706

12-707

12-709

12-712

7-POLE CONNECTOR

12-707Car End

Plastic connector set eliminates rusting, poor appearance and difficulty inplug removal. Design offers dual grips for ease of plug removal fromsocket and incorporates vinyl inserts to keep out dirt and moisture.Interior design prevents internal short-circuiting, and the safety latchprevents damage from accidental pull-away. Color coded to RVIstandards

12-700 Series (7-Pole Set) Metal 12-702 Trailer End

12-703Car End

UNIQUE INTERIOR DESIGNELIMINATES SHORTING OUT-Non-corroding, shock-resistantinteriors with unique terminalreinforcer dams that eliminateshort circuiting by preventingcontact from spreading.Center pin will take up to8-gauge wire for battery charge system.

Traditional metal connectors. Heavily plated for maximum weather andcorrosion resistance. Stainless steel cover spring. Jumbo welded pistol grip.Unique safety latch prevents damage from accidental pull-away. Speciallydesigned vinyl inserts keep out dirt and moisture. Color coded to RVIstandards.

Staking methods proven in long term usage. No possibility of moldingcompound contaminating contacts to cause "dead spots”.

Unique method of machining from solid bar (not stamping) and springloading contacts give long trouble-free service. Over 1.5 million trucksutilize this type of heavy duty connector contacts.

"Floating Pins" originating with POLLAK and a standard for the truckingindustry are self-aligning offering continuous wiping action and the mostpositive contact.

Terminals designed for 2-8 gauge, 2-12 gauge and 5-14 gauge to newindustry standard for minimum voltage drop.

Contacts on BOTH trailer and car side spring loaded. Completely FIELDserviceable.

12-905 Series (9-Pole Set)

Bracket for towing vehicle

Towing vehicle side

Trailer Side

Complete for towing vehicle and trailerside

12-701U

12-907

12-906

12-905

12-907Car End

12-906Trailer End

12-703 with a 12-701U Bracket

12-700 Plug & Socket with 12-701U Bracket

Car-End Only Socket

Trailer-End Only Plug

12-703 Socket & 12-702 Plug12-700

12-702

12-703

12-704

12-710

MOUNTING BRACKETSRight Angle Mounting Brackets for: 11-893. 12-703,12-707, 12-907

12-711UBlack EpoxyCoated forprotectionagainst rustand corrosion

12-701UConstructed ofHeavy GaugeSteel. Same as12-711U butwithout blackepoxy finish.

15

9-POLE CONNECTOR

12-706Trailer End

12-705 Series (7-Pole Set) Black Polla-Plastic

ELECTRICALCONTROLSSINCE 1909

3131 Pepper Mill Ct.Mississauga, ONL5l 4X6Tell: 905-820-6150Fax: 905-820-6142