NetApp Clustered Data ONTAP Operating System and OnCommand Insight - Foundation
NetApp clustered Data ONTAP Tasks · OUTPUT_NETAPP_CLUSTER_ IPSPACE_NAME netappClusterIPSpace...
Transcript of NetApp clustered Data ONTAP Tasks · OUTPUT_NETAPP_CLUSTER_ IPSPACE_NAME netappClusterIPSpace...
NetApp clustered Data ONTAP Tasks
This chapter contains the following sections:
• Accept NetApp Cluster SVM Peer, on page 3• Actions on NetApp SnapMirror Relationship, on page 4• Add Disk to NetApp Cluster Aggregate, on page 5• Add License to NetApp Cluster, on page 6• Add NetApp Cluster SnapMirror Policy Rule, on page 7• Add Port to NetApp Cluster Interface Group, on page 8• Associate NetApp Cluster Volume as NFS Datastore, on page 9• Clone NetApp Cluster Flexible Volume, on page 10• Create NetApp Cluster Aggregate, on page 11• Create NetApp Cluster Broadcast Domain, on page 12• Create NetApp Cluster Cron Job Schedule, on page 13• Create NetApp Cluster FCP Service, on page 14• Create NetApp Cluster IPSpace, on page 15• Create NetApp Cluster Interface Group, on page 16• Create NetApp Cluster Logical Interface, on page 17• Create NetApp Cluster NFS Service, on page 19• Create NetApp Cluster Peer, on page 20• Create NetApp Cluster SVM, on page 21• Create NetApp Cluster SVM Peer, on page 23• Create NetApp Cluster iSCSI Service, on page 24• Create NetApp Cluster vLAN Interface, on page 25• Create NetApp FailOver Group, on page 26• Create NetApp SVM Routing Group Route, on page 27• Create NetApp SVM SIS Policy, on page 28• Create NetApp SnapMirror Policy, on page 29• Create NetApp SnapMirror Relationship, on page 30• Delete CIFS on SVM, on page 31• Delete License from NetApp Cluster, on page 32• Delete NetApp Cluster Aggregate, on page 33• Delete NetApp Cluster Broadcast Domain, on page 34• Delete NetApp Cluster Cron Job Schedule, on page 35• Delete NetApp Cluster IPSpace, on page 36
NetApp clustered Data ONTAP Tasks1
• Delete NetApp Cluster Interface Group, on page 37• Delete NetApp Cluster Peer, on page 38• Delete NetApp Cluster SVM Peer, on page 39• Delete NetApp Cluster vLAN Interface, on page 40• Delete NetApp FailOver Group, on page 41• Delete NetApp SVM Routing Group Route, on page 42• Delete NetApp SVM SIS Policy, on page 43• Delete NetApp SnapMirror Policy, on page 44• Delete NetApp SnapMirror Relationship, on page 45• Destroy NetApp Cluster FCP Service, on page 46• Destroy NetApp Cluster Logical Interface, on page 47• Destroy NetApp Cluster NFS Service, on page 48• Destroy NetApp Cluster SVM, on page 49• Destroy NetApp Cluster iSCSI Service, on page 50• Disable Dedupe on NetApp Cluster Flexible Volume, on page 51• Disable NetApp SVM User, on page 52• Enable Dedupe on NetApp Cluster Flexible Volume, on page 53• Enable NetApp SVM User, on page 54• Execute NetApp Cluster CLI, on page 55• Get NetApp Cluster Storage, on page 56• Migrate NetApp Cluster Logical Interface, on page 57• Modify CIFS on SVM, on page 58• Modify NetApp Cluster Cron Job Schedule, on page 59• Modify NetApp Cluster Logical Interface, on page 60• Modify NetApp Cluster NFS Service, on page 62• Modify NetApp Cluster Peer, on page 63• Modify NetApp Cluster SVM, on page 64• Modify NetApp SVM SIS Policy, on page 65• Modify NetApp SVM User, on page 66• Modify NetApp SnapMirror Policy, on page 67• Modify NetApp SnapMirror Policy Rule, on page 68• Modify NetApp SnapMirror Relationship, on page 69• Modify Netapp Cluster Logical Interface Status, on page 70• Move NetApp Cluster Volume, on page 71• Reject NetApp Cluster SVM Peer, on page 72• Remove NetApp SnapMirror Policy Rule, on page 73• Remove port from Cluster Interface Group, on page 74• Rename NetApp Cluster IPSpace, on page 75• Set NetApp FCP Port Name, on page 76• Setup CIFS on NetApp SVM, on page 77• Start/Stop NetApp SVM FCP Service, on page 78• Start/Stop NetApp SVM ISCSI Service, on page 79
NetApp clustered Data ONTAP Tasks2
NetApp clustered Data ONTAP Tasks
Accept NetApp Cluster SVM PeerSummary
Accept the SVM peer relationship is in pending stateDescription
This task will accept the SVM peer relationship which is in pending state.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappSourceClusterVServerPeerIdentity
Select SVM relationship id toaccept peer relationship.
Select SVM Peerrelationship id
Outputs
TypeDescriptionOutput
netappSourceClusterVServerPeerIdentity
Identity of the source clusterSVM peer relationship
OUTPUT_SOURCE_CLUSTER_VSERVER_PEER_RELATIONSHIP_IDENTITY
netappDestinationClusterVServerPeerIdentity
Identity of the destination clusterSVM peer relationship
OUTPUT_DESTINATION_CLUSTER_VSERVER_PEER_RELATIONSHIP_IDENTITY
NetApp clustered Data ONTAP Tasks3
NetApp clustered Data ONTAP TasksAccept NetApp Cluster SVM Peer
Actions on NetApp SnapMirror RelationshipSummary
Performs actions on snapmirror relationship between two SVM volumesDescription
This task will perform the actions Initialize/Break/Quiesce/Promote/Release/Resume on the SnapMirrorrelationship of type Data Protection between a source and destination volumes.
Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterSnapmirrorRelationIdentity
Select snapmirror relationship toinitialize.
Select SnapMirrorRelationship
gen_text_inputSelect the action type to perform.Select Action Type
gen_text_inputSelect the transfer priority.Transfer Priority
gen_text_inputEnter maximum transfer rate.Default is unlimited(0).
Maximum Transfer Rate(kbps)
Outputs
TypeDescriptionOutput
NetAppClusterSnapmirrorRelationIdentity
Identity of the snapmirrorrelationship
OUTPUT_CLUSTER_SNAPMIRROR_RELATIONSHIP_IDENTITY
NetApp clustered Data ONTAP Tasks4
NetApp clustered Data ONTAP TasksActions on NetApp SnapMirror Relationship
Add Disk to NetApp Cluster AggregateSummary
Assign disk(s) to the aggregate.Description
The available spare disk(s) can be assigned to an aggregrate.Inputs
MandatoryMappable To TypeDescriptionInput
YaggregateClusterIdentitySelect an aggregate to whichdisk(s) to be added
Aggregate Name
YnetappClusterDiskIdentitySelect disk(s) to add to aggregate.Disk Name
Outputs
TypeDescriptionOutput
netappClusterAggregateName
Name of the Cluster Aggregate.OUTPUT_CLUSTER_AGGREGATE_NAME
aggregateClusterIdentityIdentity of the Cluster AggregateOUTPUT_CLUSTER_AGGREGATE_IDENTITY
NetApp clustered Data ONTAP Tasks5
NetApp clustered Data ONTAP TasksAdd Disk to NetApp Cluster Aggregate
Add License to NetApp ClusterSummary
Apply license to the Cluster.Description
Add license for a data ONTAP services.Inputs
MandatoryMappable To TypeDescriptionInput
YClusterFilerIdentitySelect Cluster in which license tobe added.
Account Name
Ygen_text_inputEnter the License Code.License Code
Outputs
TypeDescriptionOutput
ClusterFilerIdentityIdentity of the NetApp Cluster FilerOUTPUT_NETAPP_CLUSTER_FILER_IDENTITY
NetApp clustered Data ONTAP Tasks6
NetApp clustered Data ONTAP TasksAdd License to NetApp Cluster
Add NetApp Cluster SnapMirror Policy RuleSummary
Add a new rule to cluster snapmirror policyDescription
This task will add a new rule to the snapmirror policy.Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterSnapmirrorPolicyIdentity
Select policy Name.Select Policy
Ygen_text_inputSpecifies the snapshot copyretention count.
Snapshot Copy RetentionCount
Ygen_text_inputSpecifies snapshot copy label.Snapmirror Label
Specifies whether snapshot copypreserve enabled.
Preserve
gen_text_inputSpecifies the warning thresholdcount.
Warning Threshold Count
Outputs
TypeDescriptionOutput
NetAppClusterSnapmirrorPolicyRuleIdentity
Identity of the snapmirrorpolicy rule
OUTPUT_CLUSTER_SNAPMIRROR_POLICY_RULE_IDENTITY
NetApp clustered Data ONTAP Tasks7
NetApp clustered Data ONTAP TasksAdd NetApp Cluster SnapMirror Policy Rule
Add Port to NetApp Cluster Interface GroupSummary
Adds an existing port to interface group on the node under cluster context.Description
This task will adds a network port to a port interface group. The port interface group must already exist.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterInfGroupIdentity
Select interface group name in whichport needs to be added.
Interface GroupName
Ygen_text_inputSelect the port name to be added tointerface group.
Port Name
Outputs
TypeDescriptionOutput
netappClusterInfGroupIdentity
Identity of the cluster interfacegroup.
OUTPUT_CLUSTER_PORT_GROUP_IDENTITY
netappClusterNodeNameName of the cluster node.OUTPUT_CLUSTER_NODE_NAME
netappClusterPortAssocIfGroupName
Name of the cluster IfGroupname.
OUTPUT_CLUSTER_IFGRP_NAME
gen_text_inputName of the IfGroup Port name.OUTPUT_INTERFACE_PORT_NAME
NetApp clustered Data ONTAP Tasks8
NetApp clustered Data ONTAP TasksAdd Port to NetApp Cluster Interface Group
Associate NetApp Cluster Volume as NFS DatastoreSummary
Associates Cluster Volume as NFS DatastoreDescription
This task will associate the selected volume as nfs datastoreInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterLIFIdentityLIF IdentityLIF Identity
YnetappClusterVolNfsDatastoreResourceType
Select type of VMwareresource
Target Resource Type
YvmwareHostMultiSelectSelect a hostnode.Hostnode
YvmwareClusterIdentitySelect VMware ClusterVMware ClusterIdentity
Ygen_text_inputEnter the NFS Path.NFS Path
gen_text_inputEnter the datastore name.Datastore Name
YnetappClusterVolNfsDatastoreAccessMode
Select an access mode.Access Mode
YnetappClusterVolNfsDatastoreSuccessCriteria
Select an option from list topass the task
Success Criteria
Outputs
TypeDescriptionOutput
dataStoreNameDatastore nameOUTPUT_DATASTORE_NAME
vmHostHost NameOUTPUT_HOST_NAME
gen_text_inputVMware account name.OUTPUT_VMWARE_ACCOUNT_NAME
vmwareDatastoreIdentityDatastore name identityOUTPUT_VMWARE_DATASTORE_IDENTITY
gen_text_inputDatastore Info identityOUTPUT_VMWARE_DATASTORE_INFO_IDENTITY
vmwareHostNodeIdentityVMware Host Node IdentityOUTPUT_VMWARE_HOST_NODE_IDENTITY
vmwareHostMultiSelectHost Node Name.OUTPUT_VMWARE_HOST_NODE_NAME
NetApp clustered Data ONTAP Tasks9
NetApp clustered Data ONTAP TasksAssociate NetApp Cluster Volume as NFS Datastore
Clone NetApp Cluster Flexible VolumeSummary
Creates Cluster clone volumeDescription
This task will create clone volume from the selected parent volume.Inputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputName of the clone volumeVolume Name
YnetappClusterVolumeIdentityName of the Parent VolumeParent Volume
netappClusterVolumeSnapshotIdentity
Name of the Parent VolumeSnapshot
Parent Snapshot
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterVolumeIdentityIdentity of the cluster VolumeOUTPUT_CLUSTER_VOLUME_IDENTITY
NetApp clustered Data ONTAP Tasks10
NetApp clustered Data ONTAP TasksClone NetApp Cluster Flexible Volume
Create NetApp Cluster AggregateSummary
Creation of the aggregate.Description
This task will create an aggregrate.Inputs
MandatoryMappable To TypeDescriptionInput
YClusterFilerIdentitySelect Account in which aggregateto be created.
Account Name
YnetappAggregateNameEnter Aggregate NameAggregate Name
Ygen_text_inputEnter Number of disksDisk Count
netappClusterNodeIdentitySelect node in which aggregate tobe created
Node Name
netappClusterDiskIdentitySelect disks to be aggregatedDisk List
netappClusterRaidTypeChoose raid typeRaid Type
Outputs
TypeDescriptionOutput
netappClusterAggregateName
Name of the Cluster Aggregate.OUTPUT_CLUSTER_AGGREGATE_NAME
ClusterFilerIdentityIdentity of the NetApp ClusterFiler
OUTPUT_NETAPP_CLUSTER_FILER_IDENTITY
aggregateClusterIdentityIdentity of the Cluster AggregateOUTPUT_CLUSTER_AGGREGATE_IDENTITY
NetApp clustered Data ONTAP Tasks11
NetApp clustered Data ONTAP TasksCreate NetApp Cluster Aggregate
Create NetApp Cluster Broadcast DomainSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
netappClusterSelectedAccountIdentity
Select an AccountAccount Name
Ygen_text_inputEnter the Broadcast DomainName
Broadcast Domain Name
Ygen_text_inputEnter the MTU valueMaximum TransmissionUnit (MTU)
netappClusterAllPortsIdentityEnter the PortPort
netappClusterIPSpaceIdentityEnter the IPSpace NameIPSpace Name
Outputs
TypeDescriptionOutput
netappClusterBroadcastDomainListIdentity
Broadcast Domain ListIdentity
OUTPUT_CLUSTER_BROADCAST_DOMAIN_NAME_IDENTITY
netappClusterBroadcastDomainName
Name of the BroadcastDomain
OUTPUT_CLUSTER_BROADCAST_DOMAIN_NAME
netappClusterAllPortsIdentityName of the Port.OUTPUT_CLUSTER_ALL_PORT_NAMES
NetApp clustered Data ONTAP Tasks12
NetApp clustered Data ONTAP TasksCreate NetApp Cluster Broadcast Domain
Create NetApp Cluster Cron Job ScheduleSummary
Creation of cron job schedule.Description
This task will create a new cron job schedule entry.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterNodeIdentitySelect account name in which cronjob schedule to be created.
Account Name
Ygen_text_inputEnter cron job schedule name.Job Schedule Name
gen_text_inputEnter cron day of month.Day of Month
gen_text_inputEnter cron day of week.Day of Week
gen_text_inputEnter cron hour.Hour
Ygen_text_inputEnter cron minute.Minute
gen_text_inputEnter cron month.Month
Outputs
TypeDescriptionOutput
NetAppClusterCronJobIdentity
Identity of the cron jobschedule.
OUTPUT_CLUSTER_CRON_JOB_SCHEDULE_IDENTITY
NetApp clustered Data ONTAP Tasks13
NetApp clustered Data ONTAP TasksCreate NetApp Cluster Cron Job Schedule
Create NetApp Cluster FCP ServiceSummary
Creates FCP service for SVMDescription
This task will create FCP service for a selected SVMInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVMName to which FCP service tobe created
SVM Name
gen_text_inputThe FCP target node name for theSVM(WWNN).
FCP Target NodeName
netappClusterFCPServiceIsAvailable
Determine the initial state of the FCPService.If true, the service will beautomatically started after creationcompletes.The default is true.
Start
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterFCPServiceIdentity
Identity of theNetAppCluster FCPService
OUTPUT_CLUSTER_FCP_SERVICE_IDENTITY
gen_text_inputNode Name of NetApp ClusterFCP Service
OUTPUT_CLUSTER_FCP_NODE_NAME
NetApp clustered Data ONTAP Tasks14
NetApp clustered Data ONTAP TasksCreate NetApp Cluster FCP Service
Create NetApp Cluster IPSpaceSummary
Create a new IP Space.Description
Creates a new IP Space with the given name in specified filer. This task will work for both ONTAP andOnCommand accounts.
Inputs
MandatoryMappable To TypeDescriptionInput
YClusterFilerIdentityFiler Identity NameFiler Identity Name
Ygen_text_inputEnter IPSPace Name.IPSpace Name
Outputs
TypeDescriptionOutput
netappClusterIPSpaceNameName of the NetApp clusterIPSpace.
OUTPUT_NETAPP_CLUSTER_IPSPACE_NAME
netappClusterIPSpaceIdentity
NetApp cluster IPSpace Identity.OUTPUT_NETAPP_CLUSTER_IPSPACE_IDENTITY
filerIdentityIdentity of the FilerOUTPUT_FILER_IDENTITY
NetApp clustered Data ONTAP Tasks15
NetApp clustered Data ONTAP TasksCreate NetApp Cluster IPSpace
Create NetApp Cluster Interface GroupSummary
Creates a new Interface group on the node under cluster context.Description
This task will creates a new port interface group for the selected node under the cluster context.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterNodeIdentity
Select Node name in which interfacegroup needs to be created.
Node Name
Ygen_text_inputEnter name of the interface group.InterfaceGroupName
gen_text_inputThe distribution function of the portinterface group that will be created.
Distribution Function
Ygen_text_inputThe create policy for the interface groupthat will be created.
Create Policy
Outputs
TypeDescriptionOutput
netappClusterInfGroupIdentityIdentity of the cluster interfacegroup.
OUTPUT_CLUSTER_PORT_GROUP_IDENTITY
netappClusterNodeNameName of the cluster node.OUTPUT_CLUSTER_NODE_NAME
netappClusterNodeIdentityIdentity of the cluster node.OUTPUT_CLUSTER_NODE_IDENTITY
netappClusterPortAssocIfGroupName
Name of the cluster IfGroupname.
OUTPUT_CLUSTER_IFGRP_NAME
NetApp clustered Data ONTAP Tasks16
NetApp clustered Data ONTAP TasksCreate NetApp Cluster Interface Group
Create NetApp Cluster Logical InterfaceSummary
Creates a new Logical Interface to a SVM.Description
This task will create a Logical Interface(LIF) for the slected SVM. A logical interface is an IP addressassociated with a physical network port. In the event of component failures, a logical interface can failover or be migrated to a different physical port, thereby continuing to provide network access despitethe component failure.
Inputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputSelect role.Role
YnetappClusterVServerIdentity
Select SVM NameSVM Name
YnetappClusterNodeIdentity
Select node name.Home Node
Select protocols to be allowed.Allowed Protocols
Ygen_text_inputSelect home port name.Home Port
gen_text_inputEnter Logical Interface NameLogical InterfaceName
Ygen_text_inputSpecify IP Address range, ex: 192.168.0.1-192.168.0.255,192.168.1.20
IP Address
Ygen_text_inputEnter Subnetmask IP Address.Subnetmask
gen_text_inputSpecifies the failover policy for the LIF.For FCP,iSCSI LIFs, the only failover
Failover Policy
policy is disabled,CIFS and fcache LIFs,the default policy is nexavail.
gen_text_inputSpecifies whether the failover rules areautomatically created, manually createdby the administrator or disabled.
Use Failover Group
Ygen_text_inputSpecifies the failover rules are manuallycreated by the administrator
Failover GroupName
Outputs
TypeDescriptionOutput
netappClusterLIFIdentityIdentity of the cluster Logicalinterface
OUTPUT_CLUSTER_LOGICAL_INF_IDENTITY
netappClusterNodeNameName of the cluster node.OUTPUT_CLUSTER_NODE_NAME
gen_text_inputIP Address of the LIFLIF_IP_ADDRESS
NetApp clustered Data ONTAP Tasks17
NetApp clustered Data ONTAP TasksCreate NetApp Cluster Logical Interface
TypeDescriptionOutput
gen_text_inputName of the cluster fcpport(wwpn).
OUTPUT_CLUSTER_FCP_PORT_NAME
netappClusterNodeIdentityIdentity of the cluster node.OUTPUT_CLUSTER_NODE_IDENTITY
gen_text_inputIdentity of the AccountOUTPUT_ACCOUNT_IDENTITY
netappAccountNameName of the Account on which theselected operation was performed
ACCOUNT_NAME
netappClusterLIFNameName of the Cluster Logicalinterface
OUTPUT_CLUSTER_LOGICAL_INF_NAME
netappClusterVServerIdentity
Identity of the SVMOUTPUT_CLUSTER_SVM_IDENTITY
gen_text_inputName of the cluster port.OUTPUT_CLUSTER_PORT
NetApp clustered Data ONTAP Tasks18
NetApp clustered Data ONTAP TasksCreate NetApp Cluster Logical Interface
Create NetApp Cluster NFS ServiceSummary
Creates NFS service for SVMDescription
This task will create nfs service for a selected SVMInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM Name to which NFSservice to be created
SVM Name
gen_text_inputSelect if you want to enable the NFSaccess
Is NFSAccess Enabled
gen_text_inputSelect if you want to enable theVstorage
Is Vstorage Enabled
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterNfsServiceIdentity
Identity of the cluster NFSService
OUTPUT_CLUSTER_NFS_SERVICE_IDENTITY
NetApp clustered Data ONTAP Tasks19
NetApp clustered Data ONTAP TasksCreate NetApp Cluster NFS Service
Create NetApp Cluster PeerSummary
Creates a new cluster peer relationshipDescription
This task will create a new cluster peer relationship between two existing inter clusters.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterAccountIdentity
Select Cluster for creating peerrelationship
Select cluster
YnetappClusterLIFIdentitySelect the valid inter clustersSelect peer inter clusters
Provide the timeout values. Defaulttimeout value is 15 secs
Time out (seconds)
Outputs
TypeDescriptionOutput
netappClusterPeerIdentityIdentity of the cluster peerOUTPUT_CLUSTER_PEER_IDENTITY
NetApp clustered Data ONTAP Tasks20
NetApp clustered Data ONTAP TasksCreate NetApp Cluster Peer
Create NetApp Cluster SVMSummary
Creates a new Cluster SVM.Description
This task will create a new SVM on one of the node in a cluster account.Inputs
MandatoryMappable To TypeDescriptionInput
YaggregateClusterIdentitySelect an aggregate in whichVolume needs to be created.
Aggregate Name
gen_text_inputEnter name of the SVM.SVM Name
volumeEnter the Name of the Volume tobe created.
Root Volume Name
netappClusterVserverNameServiceSwitch
Select Name Service SwitchName Service Switch
netappClusterVolumeSecurityStyle
Select security style.Security Style
netappClusterSnapshotPolicyIdentity
Select snapshot policy.Snapshot Policy
vserverProtocolSelect protocolsProtocols
Do you want to start NFS serviceon SVM?
NFS Service Start
netappClusterIPSpaceIdentitySelect IPspace NameIPspace Name
Outputs
TypeDescriptionOutput
netappClusterAggregateName
Name of the Cluster Aggregate.OUTPUT_CLUSTER_AGGREGATE_NAME
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterSnapshotPolicyIdentity
Identity of the cluster snapshotpolicy
OUTPUT_CLUSTER_SNAPSHOT_POLICY_IDENTITY
ClusterFilerIdentityIdentity of the NetApp ClusterFiler
OUTPUT_NETAPP_CLUSTER_FILER_IDENTITY
netappClusterVolumeIdentityIdentity of the cluster VolumeOUTPUT_CLUSTER_VOLUME_IDENTITY
aggregateClusterIdentityIdentity of the ClusterAggregate
OUTPUT_CLUSTER_AGGREGATE_IDENTITY
NetApp clustered Data ONTAP Tasks21
NetApp clustered Data ONTAP TasksCreate NetApp Cluster SVM
TypeDescriptionOutput
netappClusterExportRuleIdentity
Identity of Cluster DefaultExport Rule Index 1.
OUTPUT_CLUSTER_DEFAULT_EXPORT_RULE_IDENTITY
NetApp clustered Data ONTAP Tasks22
NetApp clustered Data ONTAP TasksCreate NetApp Cluster SVM
Create NetApp Cluster SVM PeerSummary
Creates a new SVM peer relationshipDescription
This task will create a new SVM peer relationship between two existing SVMs.Inputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputSelect local SVM Name to createpeer relationship.
Select Local SVMName
Ygen_text_inputSelect Peer SVMName to create peerrelationship.
Select Peer SVM Name
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
gen_text_inputIdentity of the cluster peer SVMOUTPUT_CLUSTER_PEER_VSERVER_IDENTITY
netappSourceClusterVServerPeerIdentity
Identity of the source clusterSVM peer relationship
OUTPUT_SOURCE_CLUSTER_VSERVER_PEER_RELATIONSHIP_IDENTITY
netappDestinationClusterVServerPeerIdentity
Identity of the destinationcluster SVM peer relationship
OUTPUT_DESTINATION_CLUSTER_VSERVER_PEER_RELATIONSHIP_IDENTITY
NetApp clustered Data ONTAP Tasks23
NetApp clustered Data ONTAP TasksCreate NetApp Cluster SVM Peer
Create NetApp Cluster iSCSI ServiceSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM Name to which NFS service tobe created
SVM Name
gen_text_inputThe iSCSI target alias for the iSCSI service.Alias Name
gen_text_inputThe iSCSI target node name for the SVM.Itshould start with iqn.
ISCSI Target NodeName
gen_text_inputDetermine the initial state of the iSCSIService.If true, the service will be
Start
automatically started after creation completes.The default is true.
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterISCSIServiceIdentity
Identity of the cluster ISCSIService
OUTPUT_CLUSTER_ISCSI_SERVICE_IDENTITY
gen_text_inputNode Name of NetApp ClusterISCSI Service
OUTPUT_CLUSTER_ISCSI_IQN_NODE_NAME
NetApp clustered Data ONTAP Tasks24
NetApp clustered Data ONTAP TasksCreate NetApp Cluster iSCSI Service
Create NetApp Cluster vLAN InterfaceSummary
Attaches a VLAN to a network port on a specified node under cluster context.Description
This task will attaches a VLAN to a network port on a specified node.Inputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputSelect port name.Port Name
YvlanIDEnter the VLAN ID.VLAN ID
Outputs
TypeDescriptionOutput
netappClusterInfGroupIdentityIdentity of the cluster interfacegroup.
OUTPUT_CLUSTER_PORT_GROUP_IDENTITY
netappClusterPortNameName of the cluster port.OUTPUT_CLUSTER_PORT_NAME
netappClustervLANIdentityIdentity of the cluster vlan.OUTPUT_CLUSTER_VLAN_IDENTITY
netappClusterAllPortsIdentityName of the Port.OUTPUT_CLUSTER_ALL_PORT_NAMES
NetApp clustered Data ONTAP Tasks25
NetApp clustered Data ONTAP TasksCreate NetApp Cluster vLAN Interface
Create NetApp FailOver GroupSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputEnter the FailOver GroupName
FailOverGroupName
YnetappClusterAllPortsIdentityEnter the PortPort
Outputs
TypeDescriptionOutput
netappClusterFailOverGroupName
Name of the FailOverGroup
OUTPUT_CLUSTER_FAIL_OVER_GROUP_NAME
netappClusterNodeIdentityName of the NodeOUTPUT_CLUSTER_FAIL_OVER_NODE_NAME
netappClusterAllPortsIdentityName of the Port.OUTPUT_CLUSTER_ALL_PORT_NAMES
netappClusterFailOverGroupListIdentity
FailOver Group IdentityOUTPUT_CLUSTER_FAIL_OVER_GROUP_IDENTITY
NetApp clustered Data ONTAP Tasks26
NetApp clustered Data ONTAP TasksCreate NetApp FailOver Group
Create NetApp SVM Routing Group RouteSummary
Create a new network routing group route.Description
This task will create a new network routing group route.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM NameSVM Name
YclusterGatewayAddressSpecifies the IP address of gateway. Forexample: 192.18.0.0
Gateway Address
YclusterDestinationAddressSpecifies the IP address and subnetmask of destination. For example : 192.168.1.0/24.
Destination Address
clusterMetricSpecifies the metric(hop count) of theLIF.
Metric
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterRoutingGroupSpecifies the name of the routing group.For example: d192.168.1.0/24(d,c,n stands
OUTPUT_CLUSTER_ROUTING_GROUP
for data,cluster,node LIF and 192.168.1.0/24 is subnet).
clusterGatewayAddressSpecifies the IP address of gateway. Forexample: 192.18.0.0
OUTPUT_CLUSTER_GATEWAY_ADDRESS
clusterDestinationAddress
Specifies the IP address and subnet maskof destination. For example : 192.168.1.0/24.
OUTPUT_CLUSTER_DESTINATION_ADDRESS
clusterMetricSpecifies the metric(hop count) of the LIF.OUTPUT_CLUSTER_METRIC
NetApp clustered Data ONTAP Tasks27
NetApp clustered Data ONTAP TasksCreate NetApp SVM Routing Group Route
Create NetApp SVM SIS PolicySummary
Creates a new SIS policy.Description
This task will create a new SIS policy for SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM NameSVM Name
YclusterSisPolicyNameTextEnter the SIS policy nameSIS policy name
clusterSisEnabledIf the value is true, the sis policy isactive in this cluster.
Enabled
clusterSisQosPolicyQOS Policy for the SIS operationQOS Policy
clusterSisDurationThe duration in hours for which thescheduled sis operation should run.
Duration
clusterSisCronJobScheduleCron type job schedule name when theassociated policy is set on a volume.
Schedule
gen_text_inputA brief description of the policyComment
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterSisPolicyNameName of the sis Policy.OUTPUT_CLUSTER_SIS_POLICY_NAME
clusterSisEnabledTo Enable/Disable sis policy.OUTPUT_CLUSTER_SIS_ENABLED
clusterSisDurationThe duration in hours for which thescheduled sis operation should run.
OUTPUT_CLUSTER_SIS_DURATION
clusterSisQosPolicyQOS Policy for the SIS operation.OUTPUT_CLUSTER_SIS_QOS_POLICY
clusterSisCronJobScheduleCron type job schedule name.OUTPUT_CLUSTER_CRON_JOB_SCHEDULE
NetApp clustered Data ONTAP Tasks28
NetApp clustered Data ONTAP TasksCreate NetApp SVM SIS Policy
Create NetApp SnapMirror PolicySummary
Creates a new snapmirror policy on SVMDescription
This task will create a new SnapMirror policy on a SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM Name.SVM Name
Ygen_text_inputEnter new policy name.Enter Policy Name
netappSnapmirrorRestartTypeSpecifies the type of the restart.Restart
netappSnapmirrorTransferPriorityType
Specifies the type of the transferpriority.
Transfer Priority
gen_text_inputEnter comment.Enter Comment
Outputs
TypeDescriptionOutput
NetAppClusterSnapmirrorPolicyIdentity
Identity of the snapmirrorpolicy
OUTPUT_CLUSTER_SNAPMIRROR_POLICY_IDENTITY
NetApp clustered Data ONTAP Tasks29
NetApp clustered Data ONTAP TasksCreate NetApp SnapMirror Policy
Create NetApp SnapMirror RelationshipSummary
Creates a new snapmirror relationship between two SVM volumesDescription
This task will create a new SnapMirror relationship of type Data Protection between a source anddestination volumes.
Inputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputSelect Destination volume.Destination Volume
gen_text_inputSpecifies the type of the snapmirrorrelationship.
Relationship Type
Ygen_text_inputSelect Source volume.Source Volume
NetAppClusterSnapmirrorPolicyIdentity
Select snapmirror policy.Policy
NetAppClusterCronJobIdentity
Select cron job for scheduling thesnapmirror update.
Schedule
gen_text_inputEnter maximum transfer rate.Default is unlimited(0).
Maximum TransferRate (kbps)
Outputs
TypeDescriptionOutput
gen_text_inputIdentity of the snapmirrordestination volume location
OUTPUT_CLUSTER_SNAPMIRROR_DESTINATION_VOLUME_IDENTITY
gen_text_inputIdentity of the snapmirror sourcevolume location
OUTPUT_CLUSTER_SNAPMIRROR_SOURCE_VOLUME_IDENTITY
NetAppClusterSnapmirrorRelationIdentity
Identity of the snapmirrorrelationship
OUTPUT_CLUSTER_SNAPMIRROR_RELATIONSHIP_IDENTITY
NetApp clustered Data ONTAP Tasks30
NetApp clustered Data ONTAP TasksCreate NetApp SnapMirror Relationship
Delete CIFS on SVMSummary
Delete a CIFS server.Description
This task will Delete a CIFS server.If the admin-username and admin-password are not specified,theCIFS server's machine account will not be deleted from the Windows Active Directory domain.Thedeletion of the CIFS server will also delete the CIFS shares associated with it.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM NameSVM Name
clusterCifsUserNameThe username of the account used to addthis CIFS server to Active Directory
Admin User
clusterCifsPassWordThe password for the account used toadd this CIFS server to Active Directory
Admin Password
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterCifsUserNameThe username of the account used to addthis CIFS server to Active Directory.
OUTPUT_CLUSTER_CIFS_ADMIN_USERNAME
clusterCifsPassWordThe password for the account used toadd this CIFS server to ActiveDirectory.
OUTPUT_CLUSTER_CIFS_ADMIN_PASSWORD
NetApp clustered Data ONTAP Tasks31
NetApp clustered Data ONTAP TasksDelete CIFS on SVM
Delete License from NetApp ClusterSummary
Removes license to the Cluster.Description
Removes license for the Data ONTAP services.Inputs
MandatoryMappable To TypeDescriptionInput
YClusterFilerIdentitySelect Cluster from which license to bedeleted.
Account Name
YnetappClusterLicenseListName
PackagePackage
gen_text_inputSerial number of the node associated withthe license.If this parameter is not
Node SerialNumber
provided, the default serial number usedis the cluster serial number
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks32
NetApp clustered Data ONTAP TasksDelete License from NetApp Cluster
Delete NetApp Cluster AggregateSummary
Destroying the cluster aggregate.Description
This task will destroy the cluster aggregrate.Inputs
MandatoryMappable To TypeDescriptionInput
YaggregateClusterIdentitySelect an aggregate to bedeleted.
Aggregate Name
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks33
NetApp clustered Data ONTAP TasksDelete NetApp Cluster Aggregate
Delete NetApp Cluster Broadcast DomainSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterSelectedAccountIdentity
Select an AccountAccount Name
Ygen_text_inputEnter the Broadcast DomainName
Broadcast DomainName
Ygen_text_inputEnter the IPSpace NameIPSpace Name
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks34
NetApp clustered Data ONTAP TasksDelete NetApp Cluster Broadcast Domain
Delete NetApp Cluster Cron Job ScheduleSummary
Deleted the cron job schedule.Description
This task will delete a cron job schedule entry.Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterCronJobIdentity
Select cron job schedule nameto delete.
Select Cron Job ScheduleName
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks35
NetApp clustered Data ONTAP TasksDelete NetApp Cluster Cron Job Schedule
Delete NetApp Cluster IPSpaceSummary
Deletes an IP Space.Description
Destroys selected IP Space. This task will work for both ONTAP and OnCommand accounts.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterIPSpaceIdentitySelect IPSpace to delete.IPSPace Name
Outputs
TypeDescriptionOutput
netappClusterIPSpaceNameName of the NetApp clusterIPSpace.
OUTPUT_NETAPP_CLUSTER_IPSPACE_NAME
netappClusterIPSpaceIdentity
NetApp cluster IPSpace Identity.OUTPUT_NETAPP_CLUSTER_IPSPACE_IDENTITY
filerIdentityIdentity of the FilerOUTPUT_FILER_IDENTITY
NetApp clustered Data ONTAP Tasks36
NetApp clustered Data ONTAP TasksDelete NetApp Cluster IPSpace
Delete NetApp Cluster Interface GroupSummary
Deletes a Interface group on the node under cluster context.Description
This task will destroys a port interface group. Before deleting a port interface group, remove all portsfrom it.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterInfGroupIdentity
Select interface group namewhichneeds to be deleted.
Interface GroupName
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks37
NetApp clustered Data ONTAP TasksDelete NetApp Cluster Interface Group
Delete NetApp Cluster PeerSummary
Destroys peer relationship between two existing clustersDescription
This task will destroy the peering relationship between two clustersInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterPeerIdentitySelect peer cluster Name that haspeer relationship.
Select Cluster PeerName
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks38
NetApp clustered Data ONTAP TasksDelete NetApp Cluster Peer
Delete NetApp Cluster SVM PeerSummary
Delete a SVM peer relationshipDescription
This task will delete a SVM peer relationship between two existing SVMs.Inputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputSelect SVM peer relationship id todelete the relationship.
Select SVM peerrelationship id
Force deleteForce
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks39
NetApp clustered Data ONTAP TasksDelete NetApp Cluster SVM Peer
Delete NetApp Cluster vLAN InterfaceSummary
Deletes a VLAN from a network port. under cluster context.Description
This task will deletes a VLAN from a network port.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClustervLANIdentitySelect vLAN interface to bedeleted.
vLAN Interface
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks40
NetApp clustered Data ONTAP TasksDelete NetApp Cluster vLAN Interface
Delete NetApp FailOver GroupSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterFailOverGroupListIdentity
Select the FailOver GroupName
FailOverGroupName
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks41
NetApp clustered Data ONTAP TasksDelete NetApp FailOver Group
Delete NetApp SVM Routing Group RouteSummary
Deletes a network routing group route.Description
This task will delete a network routing group route.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM NameSVM Name
YclusterDestinationAddressSpecifies the IP address and subnetmask of destination. For example :192.168.1.0/24.
DestinationAddress
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterRoutingGroupSpecifies the name of the routing group. Forexample: d192.168.1.0/24(d,c,n stands for
OUTPUT_CLUSTER_ROUTING_GROUP
data,cluster,node LIF and 192.168.1.0/24 issubnet).
clusterDestinationAddress
Specifies the IP address and subnet mask ofdestination. For example : 192.168.1.0/24.
OUTPUT_CLUSTER_DESTINATION_ADDRESS
NetApp clustered Data ONTAP Tasks42
NetApp clustered Data ONTAP TasksDelete NetApp SVM Routing Group Route
Delete NetApp SVM SIS PolicySummary
Destroys a new SIS policy.Description
This task will destroys a SIS policy for SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM NameSVM Name
YclusterSisPolicyNameEnter the SIS policy nameSIS policy name
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterSisPolicyNameName of the sis Policy.OUTPUT_CLUSTER_SIS_POLICY_NAME
NetApp clustered Data ONTAP Tasks43
NetApp clustered Data ONTAP TasksDelete NetApp SVM SIS Policy
Delete NetApp SnapMirror PolicySummary
Deletes a snapmirror policy on SVMDescription
This task will deelte a SnapMirror policy on a SVM.Inputs
MandatoryMappable To TypeDescriptionInput
NetAppClusterSnapmirrorPolicyIdentity
Select snapmirror policy.Select Policy
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks44
NetApp clustered Data ONTAP TasksDelete NetApp SnapMirror Policy
Delete NetApp SnapMirror RelationshipSummary
Deletes a existing snapmirror relationship between two SVM volumesDescription
This task will delete a existing SnapMirror relationship of type Data Protection between a source anddestination volumes.
Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterSnapmirrorRelationIdentity
Select snapmirrorrelationship to delete.
Select SnapmirrorRelationship
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks45
NetApp clustered Data ONTAP TasksDelete NetApp SnapMirror Relationship
Destroy NetApp Cluster FCP ServiceSummary
Destroys FCP service for SVMDescription
This task will destroy FCP service for a selected SVMInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterFCPServiceIdentitySelect FCP Service to bedestroyed
FCP Service
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks46
NetApp clustered Data ONTAP TasksDestroy NetApp Cluster FCP Service
Destroy NetApp Cluster Logical InterfaceSummary
Destroys a Logical Interface for the SVM.Description
This task will destroys a Logical Interface(LIF) for the slected SVM. Once LIF can be destroyed, LIFcan be no longer exist for the SVM.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterLIFIdentity
Select logical interface name.Logical Interface
Bring logical interface downbefore deleting
Bring logical interface downbefore deleting
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks47
NetApp clustered Data ONTAP TasksDestroy NetApp Cluster Logical Interface
Destroy NetApp Cluster NFS ServiceSummary
Destroys NFS service for SVMDescription
This task will destroy nfs service for a selected SVMInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect NFS Service to bedestroyed
NFS Service
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterNfsServiceIdentity
Identity of the cluster NFSService
OUTPUT_CLUSTER_NFS_SERVICE_IDENTITY
NetApp clustered Data ONTAP Tasks48
NetApp clustered Data ONTAP TasksDestroy NetApp Cluster NFS Service
Destroy NetApp Cluster SVMSummary
Destroys the selected SVM.Description
This task will destroy the selected SVM in a cluster mode.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM Name.SVM Name
Force deleteForce
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks49
NetApp clustered Data ONTAP TasksDestroy NetApp Cluster SVM
Destroy NetApp Cluster iSCSI ServiceSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect ISCSI Service to bedestroyed
iSCSI Service
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterISCSIServiceIdentity
Identity of the cluster ISCSIService
OUTPUT_CLUSTER_ISCSI_SERVICE_IDENTITY
NetApp clustered Data ONTAP Tasks50
NetApp clustered Data ONTAP TasksDestroy NetApp Cluster iSCSI Service
Disable Dedupe on NetApp Cluster Flexible VolumeSummary
Disable deduplication on NetApp cluster volumeDescription
This task disables deduplication on cluster volume. Dedupe can be disabled on both Flexible andFlexGroup volumes using this task.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVolumeIdentitySelect the Volume to Enable toDedupe
Volume
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterVolumeIdentityIdentity of the cluster VolumeOUTPUT_CLUSTER_VOLUME_IDENTITY
NetApp clustered Data ONTAP Tasks51
NetApp clustered Data ONTAP TasksDisable Dedupe on NetApp Cluster Flexible Volume
Disable NetApp SVM UserSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM NameSVM Name
Ygen_text_inputEnter the UserNameUserName
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
adminusernameThe Username of the adminOUTPUT_ADMIN_USERNAME
NetApp clustered Data ONTAP Tasks52
NetApp clustered Data ONTAP TasksDisable NetApp SVM User
Enable Dedupe on NetApp Cluster Flexible VolumeSummary
Enable deduplication on NetApp cluster volumeDescription
This task enables deduplication on cluster volume. Dedupe can be enabled on both Flexible and FlexGroupvolumes using this task.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVolumeIdentitySelect the Volume to Enable toDedupe
Volume
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterVolumeIdentityIdentity of the cluster VolumeOUTPUT_CLUSTER_VOLUME_IDENTITY
NetApp clustered Data ONTAP Tasks53
NetApp clustered Data ONTAP TasksEnable Dedupe on NetApp Cluster Flexible Volume
Enable NetApp SVM UserSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM NameSVM Name
Ygen_text_inputEnter the UserNameUserName
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
adminusernameThe Username of the adminOUTPUT_ADMIN_USERNAME
NetApp clustered Data ONTAP Tasks54
NetApp clustered Data ONTAP TasksEnable NetApp SVM User
Execute NetApp Cluster CLISummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YClusterFilerIdentityFiler Identity NameFiler Identity Name
gen_text_inputEnter CLI CommandCLI Command
gen_text_inputEnter Expected OutputExpected Output
gen_text_inputEnter CLI CommandUndo CLI Command
Outputs
TypeDescriptionOutput
gen_text_inputOutput of NetApp CLI Task.OUTPUT_NETAPP_CLI_OUTPUT
NetApp clustered Data ONTAP Tasks55
NetApp clustered Data ONTAP TasksExecute NetApp Cluster CLI
Get NetApp Cluster StorageSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
Ygen_text_inputEnter the size of Volume.Volume Size
storageSizeUnitSelect the Volume Size Units.Volume Size Units
YucsServerIdentitySelect ServerServer Name
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks56
NetApp clustered Data ONTAP TasksGet NetApp Cluster Storage
Migrate NetApp Cluster Logical InterfaceSummary
Migrate an existing SVM logical interface to physical port or interface group under cluster context.Description
This task will migrates a logical interface to a port or interface group on the node you specify.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM NameSVM Name
YnetappClusterLIFIdentitySelect logical interface name.Logical Interface
YnetappClusterNodeIdentitySelect node name.Node Name
gen_text_inputSelect port namePort Name
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterNodeNameName of the cluster node.OUTPUT_CLUSTER_NODE_NAME
NetApp clustered Data ONTAP Tasks57
NetApp clustered Data ONTAP TasksMigrate NetApp Cluster Logical Interface
Modify CIFS on SVMSummary
Modify the basic configurations of a CIFS server.Description
This task will modify the basic configurations of a CIFS server.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM NameSVM Name
clusterCifsDomainThe fully qualified domain name of theWindows Active Directory this CIFSserver belongs
Domain Name
clusterCifsUserNameThe username of the account used to addthis CIFS server to Active Directory
Admin User
clusterCifsPassWordThe password for the account used to addthis CIFS server to Active Directory
Admin Password
gen_text_inputCIFS Server administrative statusAdministrativeStatus
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterCifsUserNameThe username of the account used to addthis CIFS server to Active Directory.
OUTPUT_CLUSTER_CIFS_ADMIN_USERNAME
clusterCifsPassWordThe password for the account used to addthis CIFS server to Active Directory.
OUTPUT_CLUSTER_CIFS_ADMIN_PASSWORD
clusterCifsDomainThe fully qualified domain name of theWindows Active Directory.
OUTPUT_CLUSTER_CIFS_DOMAIN
NetApp clustered Data ONTAP Tasks58
NetApp clustered Data ONTAP TasksModify CIFS on SVM
Modify NetApp Cluster Cron Job ScheduleSummary
Modification of cron job schedule.Description
This task will modify the attributes of the cron job schedule entry.Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterCronJobIdentity
Select cron job schedule name tomodify.
Select Cron JobSchedule Name
gen_text_inputEnter cron day of month.Day of Month
gen_text_inputEnter cron day of week.Day of Week
gen_text_inputEnter cron hour.Hour
Ygen_text_inputEnter cron minute.Minute
gen_text_inputEnter cron month.Month
Outputs
TypeDescriptionOutput
NetAppClusterCronJobIdentity
Identity of the cron jobschedule.
OUTPUT_CLUSTER_CRON_JOB_SCHEDULE_IDENTITY
NetApp clustered Data ONTAP Tasks59
NetApp clustered Data ONTAP TasksModify NetApp Cluster Cron Job Schedule
Modify NetApp Cluster Logical InterfaceSummary
Modify the existing logical interface associated with a SVM.Description
This task modifies parameters of the logical interface (LIF) associated with a storage virtual machine(SVM). IP address, subnet mask, home node, home port, and failover policies can be modified. ActiveLIFs that have iSCSI protocol enabled do not allow changes to home node, home port, or failover policy.Active LIFs with FCP protocol do not allow changes to any parameter.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterLIFIdentitySelect logical interfaceLogical Interface
YnetappClusterNodeIdentitySelect home node of the LIFHome Node
Ygen_text_inputSelect home port for the LIFHome Port
gen_text_inputSpecify IP Address of the LIFIP Address
gen_text_inputEnter the address of the subnet maskSubnet Mask
NETAPP_LIF_FAILOVER_POLICY
Specifies the failover policy for the LIF.For FCP and iSCSI LIFs, the onlyavailable failover policy is disabled.
Failover Policy
NETAPP_LIF_USE_FAILOVER_GROUP
Specifies whether the failover rules areautomatically created, manually createdby the administrator or disabled.
Use Failover Group
Outputs
TypeDescriptionOutput
netappClusterLIFIdentityIdentity of the cluster Logicalinterface
OUTPUT_CLUSTER_LOGICAL_INF_IDENTITY
netappClusterNodeNameName of the cluster node.OUTPUT_CLUSTER_NODE_NAME
gen_text_inputIP Address of the LIFLIF_IP_ADDRESS
netappClusterNodeIdentityIdentity of the cluster node.OUTPUT_CLUSTER_NODE_IDENTITY
gen_text_inputIdentity of the AccountOUTPUT_ACCOUNT_IDENTITY
netappAccountNameName of the Account on which theselected operation was performed
ACCOUNT_NAME
netappClusterLIFNameName of the Cluster Logicalinterface
OUTPUT_CLUSTER_LOGICAL_INF_NAME
netappClusterVServerIdentity
Identity of the SVMOUTPUT_CLUSTER_SVM_IDENTITY
NetApp clustered Data ONTAP Tasks60
NetApp clustered Data ONTAP TasksModify NetApp Cluster Logical Interface
TypeDescriptionOutput
gen_text_inputName of the cluster port.OUTPUT_CLUSTER_PORT
NetApp clustered Data ONTAP Tasks61
NetApp clustered Data ONTAP TasksModify NetApp Cluster Logical Interface
Modify NetApp Cluster NFS ServiceSummary
Modifies NFS service attributesDescription
This task will modify nfs service attributes like isNfsAccessEnabled,tecInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select NFS Service to be modifiedNFS Service
gen_text_inputSelect if you want to enable the NFSaccess
Is NFS Access Enabled
gen_text_inputSelect if you want to enable theVstorage
Is Vstorage Enabled
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterNfsServiceIdentity
Identity of the cluster NFSService
OUTPUT_CLUSTER_NFS_SERVICE_IDENTITY
NetApp clustered Data ONTAP Tasks62
NetApp clustered Data ONTAP TasksModify NetApp Cluster NFS Service
Modify NetApp Cluster PeerSummary
Modifies a peer relationship between two existing clustersDescription
This task will modify the peering relationship between two clustersInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterPeerIdentitySelect Cluster peer for modifyingrelationship
Select cluster peer
YnetappClusterLIFIdentitySelect the valid inter clustersSelect peer inter clusters
Provide the timeout values. Defaulttimeout value is 15 secs
Time out (seconds)
Outputs
TypeDescriptionOutput
netappClusterPeerIdentityIdentity of the cluster peerOUTPUT_CLUSTER_PEER_IDENTITY
NetApp clustered Data ONTAP Tasks63
NetApp clustered Data ONTAP TasksModify NetApp Cluster Peer
Modify NetApp Cluster SVMSummary
Modifies Cluster SVM parametersDescription
This task will modify cluster SVM parameters, Name Service Switch, Name Mapping Switch, Maxvolume limit, Aggregate list, Snapshot policy and Protocols.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM Name.SVM Name
netappClusterVserverNameServiceSwitch
Select Name Service SwitchName Service Switch
netappClusterVserverNameMappingSwitch
Select Name Mapping SwitchNameMapping Switch
gen_text_inputEnter maximum no. of volumesto limit.
Max. Volume Limit
YaggregateClusterIdentityList of aggregates on whichvolumes can be created for theSVM.
Aggregate List
netappClusterSnapshotPolicyIdentity
Select snapshot policy.Snapshot Policy
vserverProtocolSelect protocolsProtocols
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterSnapshotPolicyIdentity
Identity of the cluster snapshotpolicy
OUTPUT_CLUSTER_SNAPSHOT_POLICY_IDENTITY
NetApp clustered Data ONTAP Tasks64
NetApp clustered Data ONTAP TasksModify NetApp Cluster SVM
Modify NetApp SVM SIS PolicySummary
Modifies a new SIS policy.Description
This task will modify a SIS policy for SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM NameSVM Name
YclusterSisPolicyNameEnter the SIS policy nameSIS policy name
clusterSisEnabledIf the value is true, the sis policy isactive in this cluster.
Enabled
clusterSisQosPolicyQOS Policy for the SIS operationQOS Policy
clusterSisDurationThe duration in hours for which thescheduled sis operation should run.
Duration
clusterSisCronJobScheduleCron type job schedule name when theassociated policy is set on a volume.
Schedule
gen_text_inputA brief description of the policyComment
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterSisPolicyNameName of the sis Policy.OUTPUT_CLUSTER_SIS_POLICY_NAME
clusterSisEnabledTo Enable/Disable sis policy.OUTPUT_CLUSTER_SIS_ENABLED
clusterSisDurationThe duration in hours for which thescheduled sis operation should run.
OUTPUT_CLUSTER_SIS_DURATION
clusterSisQosPolicyQOS Policy for the SIS operation.OUTPUT_CLUSTER_SIS_QOS_POLICY
clusterSisCronJobScheduleCron type job schedule name.OUTPUT_CLUSTER_CRON_JOB_SCHEDULE
NetApp clustered Data ONTAP Tasks65
NetApp clustered Data ONTAP TasksModify NetApp SVM SIS Policy
Modify NetApp SVM UserSummaryDescriptionInputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM NameSVM Name
Ygen_text_inputEnter the UserNameUserName
YpasswordEnter the PasswordPassword
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
adminusernameThe Username of the adminOUTPUT_ADMIN_USERNAME
NetApp clustered Data ONTAP Tasks66
NetApp clustered Data ONTAP TasksModify NetApp SVM User
Modify NetApp SnapMirror PolicySummary
Modify a snapmirror policy on SVMDescription
This task will modify a SnapMirror policy on a SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterSnapmirrorPolicyIdentity
Select policy Name.Select Policy
netappSnapmirrorRestartTypeSpecifies the type of the restart.Restart
netappSnapmirrorTransferPriorityType
Specifies the type of the transferpriority.
Transfer Priority
gen_text_inputEnter comment.Enter Comment
Outputs
TypeDescriptionOutput
NetAppClusterSnapmirrorPolicyIdentity
Identity of the snapmirrorpolicy
OUTPUT_CLUSTER_SNAPMIRROR_POLICY_IDENTITY
NetApp clustered Data ONTAP Tasks67
NetApp clustered Data ONTAP TasksModify NetApp SnapMirror Policy
Modify NetApp SnapMirror Policy RuleSummary
Modify a rule from cluster snapmirror policyDescription
This task will modify a rule from the snapmirror policy.Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterSnapmirrorPolicyRuleIdentity
Select policy rule to modify.Select Policy Rule
Ygen_text_inputSpecifies the snapshot copyretention count.
Snapshot Copy RetentionCount
Specifies whether snapshot copypreserv enabled.
Preserve
gen_text_inputSpecifies the warning thresholdcount.
Warning Threshold Count
Outputs
TypeDescriptionOutput
NetAppClusterSnapmirrorPolicyRuleIdentity
Identity of the snapmirrorpolicy rule
OUTPUT_CLUSTER_SNAPMIRROR_POLICY_RULE_IDENTITY
NetApp clustered Data ONTAP Tasks68
NetApp clustered Data ONTAP TasksModify NetApp SnapMirror Policy Rule
Modify NetApp SnapMirror RelationshipSummary
Modifies snapmirror relationship between two SVM volumesDescription
This task will modify the parameters of the SnapMirror relationship of type Data Protection between asource and destination volumes.
Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterSnapmirrorRelationIdentity
Select snapmirror relationship tomodify.
Select SnapMirrorRelationship
NetAppClusterSnapmirrorPolicyIdentity
Select snapmirror policy.Policy
NetAppClusterCronJobIdentitySelect cron job for scheduling thesnapmirror update.
Schedule
gen_text_inputEnter maximum transfer rate.Default is unlimited(0).
Maximum TransferRate (kbps)
Outputs
TypeDescriptionOutput
NetAppClusterSnapmirrorRelationIdentity
Identity of the snapmirrorrelationship
OUTPUT_CLUSTER_SNAPMIRROR_RELATIONSHIP_IDENTITY
NetApp clustered Data ONTAP Tasks69
NetApp clustered Data ONTAP TasksModify NetApp SnapMirror Relationship
Modify Netapp Cluster Logical Interface StatusSummary
Modify a Netapp cluster logical interface status.Description
This task modifies the administrative status of the logical interface associated with a storage virtualmachine (SVM).
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterLIFIdentitySelect logical interface name tomodify status
Logical Interface
NETAPP_LIF_STATUSLIF's Administrative StatusAdministrative Status
Outputs
TypeDescriptionOutput
netappClusterLIFIdentityIdentity of the cluster Logicalinterface
OUTPUT_CLUSTER_LOGICAL_INF_IDENTITY
gen_text_inputIdentity of the AccountOUTPUT_ACCOUNT_IDENTITY
netappAccountNameName of the Account on which theselected operation was performed
ACCOUNT_NAME
netappClusterLIFNameName of the Cluster Logicalinterface
OUTPUT_CLUSTER_LOGICAL_INF_NAME
netappClusterVServerIdentity
Identity of the SVMOUTPUT_CLUSTER_SVM_IDENTITY
gen_text_inputName of the cluster port.OUTPUT_CLUSTER_PORT
NetApp clustered Data ONTAP Tasks70
NetApp clustered Data ONTAP TasksModify Netapp Cluster Logical Interface Status
Move NetApp Cluster VolumeSummary
Moves a volume to setination aggregate under the cluster context.Description
This task will moves a flexible volume to any eligible aggregate in the cluster.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVolumeIdentitySelect the Volume to be moved.Volume Name
YnetappClusterAggregateNameSelect an aggregate in whichVolume needs to be moved.
Aggregate Name
Outputs
TypeDescriptionOutput
netappClusterVolumeIdentityIdentity of the cluster VolumeOUTPUT_CLUSTER_VOLUME_IDENTITY
NetApp clustered Data ONTAP Tasks71
NetApp clustered Data ONTAP TasksMove NetApp Cluster Volume
Reject NetApp Cluster SVM PeerSummary
Rejects a new SVM peer relationship which is in pending stateDescription
This task will reject the SVM peer relationship which is in pending state.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappSourceClusterVServerPeerIdentity
Select SVM relationship id toreject peer relationship.
Select SVM Peerrelationship id
Outputs
TypeDescriptionOutput
netappSourceClusterVServerPeerIdentity
Identity of the source clusterSVM peer relationship
OUTPUT_SOURCE_CLUSTER_VSERVER_PEER_RELATIONSHIP_IDENTITY
netappDestinationClusterVServerPeerIdentity
Identity of the destination clusterSVM peer relationship
OUTPUT_DESTINATION_CLUSTER_VSERVER_PEER_RELATIONSHIP_IDENTITY
NetApp clustered Data ONTAP Tasks72
NetApp clustered Data ONTAP TasksReject NetApp Cluster SVM Peer
Remove NetApp SnapMirror Policy RuleSummary
Removes a rule from cluster snapmirror policyDescription
This task will remove a rule from the snapmirror policy.Inputs
MandatoryMappable To TypeDescriptionInput
YNetAppClusterSnapmirrorPolicyRuleIdentity
Select policy rule toremove.
Select Policy Rule
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks73
NetApp clustered Data ONTAP TasksRemove NetApp SnapMirror Policy Rule
Remove port from Cluster Interface GroupSummary
Remove an existing port from interface group on the node under cluster context.Description
This task will removes a network port from port interface group. The port interface group must alreadyexist.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterInfGroupIdentity
Select interface group name in whichport needs to be removed.
Interface GroupName
Ygen_text_inputSelect the port name to be removed tointerface group.
Port Name
Outputs
No Outputs
NetApp clustered Data ONTAP Tasks74
NetApp clustered Data ONTAP TasksRemove port from Cluster Interface Group
Rename NetApp Cluster IPSpaceSummary
Assigns selected interface to IP Space.Description
This task will rename the selected VLAN interface to the IP Space. This task will work for both ONTAPand OnCommand accounts.
Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterIPSpaceIdentitySelect IPSPace .IPSPace Name
Ygen_text_inputEnter New Name forIPSPace.
New IPSPace Name
Outputs
TypeDescriptionOutput
netappClusterIPSpaceNameName of the NetApp clusterIPSpace.
OUTPUT_NETAPP_CLUSTER_IPSPACE_NAME
netappClusterIPSpaceIdentity
NetApp cluster IPSpace Identity.OUTPUT_NETAPP_CLUSTER_IPSPACE_IDENTITY
filerIdentityIdentity of the FilerOUTPUT_FILER_IDENTITY
NetApp clustered Data ONTAP Tasks75
NetApp clustered Data ONTAP TasksRename NetApp Cluster IPSpace
Set NetApp FCP Port NameSummary
Sets FCP Adapter portnameDescription
This task will set new port name to selected fcp adapter.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterLIFIdentitySelect FCP Adaptor for whichportname to be set
Adapter Name(LIF)
Ygen_text_inputEnter Port name in wwpn formatPort Name(wwpn)
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterLIFIdentityIdentity of the cluster Logicalinterface
OUTPUT_CLUSTER_LOGICAL_INF_IDENTITY
gen_text_inputName of the cluster fcpport(wwpn).
OUTPUT_CLUSTER_FCP_PORT_NAME
NetApp clustered Data ONTAP Tasks76
NetApp clustered Data ONTAP TasksSet NetApp FCP Port Name
Setup CIFS on NetApp SVMSummary
Configure and setup CIFS services on a SVM.Description
This task will Configure and setup CIFS services on a SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentity
Select SVM NameSVM Name
Ygen_text_inputThe NetBIOS name of the cifs serverCIFS Server
YclusterCifsDomainThe fully qualified domain name of theWindows Active Directory this CIFS serverbelongs
Domain Name
YclusterCifsUserNameThe username of the account used to add thisCIFS server to Active Directory
Admin User
YclusterCifsPassWordThe password for the account used to add thisCIFS server to Active Directory
Admin Password
Ygen_text_inputThe Organizational Unit(OU) within theWindows Active Directory this cifs serverbelongs
OrganizationalUnit
Ygen_text_inputThe ldap schema to use for this configurationSchema
Ygen_text_inputList of LDAP Server IP addresses to use forthis configuration.The option is NOT
Server IP
applicable for configurations using ActiveDirectory LDAP Servers
Outputs
TypeDescriptionOutput
netappClusterVServerIdentity
Identity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
clusterCifsUserNameThe username of the account used to addthis CIFS server to Active Directory.
OUTPUT_CLUSTER_CIFS_ADMIN_USERNAME
clusterCifsPassWordThe password for the account used to addthis CIFS server to Active Directory.
OUTPUT_CLUSTER_CIFS_ADMIN_PASSWORD
clusterCifsDomainThe fully qualified domain name of theWindows Active Directory.
OUTPUT_CLUSTER_CIFS_DOMAIN
NetApp clustered Data ONTAP Tasks77
NetApp clustered Data ONTAP TasksSetup CIFS on NetApp SVM
Start/Stop NetApp SVM FCP ServiceSummary
Starts or stops FCP service of SVMDescription
This task will start or stop the fcp service of selected SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM Name.SVM Name
netappClusterFCPServiceIsAvailable
Do you want to start FCPservice on SVM?
FCP Service Start
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
NetApp clustered Data ONTAP Tasks78
NetApp clustered Data ONTAP TasksStart/Stop NetApp SVM FCP Service
Start/Stop NetApp SVM ISCSI ServiceSummary
Starts or stops ISCSI service of SVMDescription
This task will start or stop the iscsi service of selected SVM.Inputs
MandatoryMappable To TypeDescriptionInput
YnetappClusterVServerIdentitySelect SVM Name.SVM Name
gen_text_inputDo you want to start ISCSIservice on SVM?
ISCSI Service Start
Outputs
TypeDescriptionOutput
netappClusterVServerIdentityIdentity of the cluster SVMOUTPUT_CLUSTER_VSERVER_IDENTITY
netappClusterISCSIServiceIdentity
Identity of the cluster ISCSIService
OUTPUT_CLUSTER_ISCSI_SERVICE_IDENTITY
NetApp clustered Data ONTAP Tasks79
NetApp clustered Data ONTAP TasksStart/Stop NetApp SVM ISCSI Service
NetApp clustered Data ONTAP Tasks80
NetApp clustered Data ONTAP TasksStart/Stop NetApp SVM ISCSI Service