Don’t Replace – Renu

GlassRenu® offers a full line of products for the removal of scratches and etching from all types of glass.

GlassRenu manufactures the industry’s premier solution for rapid scratch removal from glass without leaving trace marks or distortion. Working with TheSize over the past year we have developed this unique Finishing and Installation Kit to allow fabricators the ability to remove surface damage from the popular NeoLith Polished Material line of compact sintered surfaces. This Kit is designed to mate with existing tooling found in most fabrication shops to allow quick and easy removal of all types of scratches and etch marks that may occur both during and after fabrication. The Kit includes everything a fabricator will need except the Sander/Polisher at a lower cost than our other systems, as well as all the instructions needed to remove any surface damage that may occur.

The KitThe GlassRenu Finishing and Installation Kit is a complete solution that includes:

• 5” RenuDisks® selected specifically to remove the most common types of damage fabricators will come across

• 5” Polishing Felt

• One Pouch of Polishing Compound

• 4oz Spray Bottle with sprayer

• Instruction Manual

NeoLith Installation Scratch Removal and Finishing Kit

Highlights

n The newest solution for removing surface damage from NeoLith Polished Material

nSame results as our Professional Grade System at a fraction of the price

nPatented process utilizing proprietary abrasives to remove surface damage from glass

nPerfect for use on all types of surface damage ranging from:

• Scratches

• Hard Water Etching

• Tooling Marks

nAdvanced formula polish compound for rapid restoration of damaged glass

RenuDisks

RenuDisks are available in two grinding ranges to match the type of surface damage being repaired.

The unique design and construction are proprietary to GlassRenu and are available only through GlassRenu and GlassRenu distributors. The disks employ a special construction that allows for rapid scratch removal from glass without leaving trace marks or discernible distortion – even on deep damage.

Instructions on when to use a particular disk grinding range are included in the GlassRenu Finishing and Installation Kit. The disks are color-coded for quick identification and ease of use. Selection by color helps to take the guesswork out of the scratch removal process.

NeoLith Installation Scratch Removal and Finishing Kit

©2017, GlassRenu, LLC All Rights Reserved. GlassRenu, the GlassRenu logo and RenuDisk are trademarks or service marks of The REDD Group, LLC in the United States and other countries. NeoLith is a registered Trademark of TheSize. The respective mark owners reserve all Rights. For more information please visit www.glassrenu.com

Printed in the USA 1/2017

418 North Buchanan Circle, Unit 3 Pacheco, CA 94553(888) 769-0001www.glassrenu.com

For ordering or quotes, please email

sales@glassrenu.com

or call (888) 769-0001

RenuDisk Grinding Range Color Key:

BLACK Used for all damage that catches a fingernail

GREY Used to remove damage you can’t feel with your fingernail and for Pre-polish

GlassRenu Polishing CompoundEach Finishing and Installation Kit comes with a single pouch of GlassRenu’s proprietary advanced formula Polishing compound. We take rare earth mineral polish to a whole new level by refining and mill-ing our own blend of polishing com-pounds to achieve the highest quali-ty finished product. One pouch mixed with 4 oz of clean water will allow the user to polish up to 40 square feet of light damage from the glass surface.

Ordering InformationGlassRenu products are available from GlassRenu and GlassRenu Authorized Distributors. For more information on where you can pick up your GlassRenu Finishing and Installation Kit for NeoLith, or any of our other restoration prod-ucts, visit us online at www.glassrenu.com or call our toll free number at 888-769-0001