NEO5 IP

Rev 15.06.01

User Manual / Manual de Uso

(IP 65)

(*) Power Taps (70V)................................. 1Power Taps (100V).................................... 2 ) ) ) )Low Impedance position.......................... 8 (40W)

Sensitivity (1W/1m) .................................. 88 dB

Max. SPL ..................................................... 100 dB

Frequency Response .............................. 60Hz - 20kHz

Elements.................................................... 5" Woofer + 0,5" Tweeter

Dimensions .............................................. 171 x 244 x 166 mm

Material (enclosure) ................................. ABS plastic

IP rating .................................................... IP 65

RAL colour code ...................................... RAL 9003 (W) / RAL 9004 (B)

Material (grille) ......................................... Aluminium

Weight ....................................................... 2,3 Kg

W(4k9 )/2W(2k45 )/4W(1k22 )/8W(612 ) W(5k /4W(2k5 /8W(1k2 /16W(625

(*) The power taps indicated on the selector switch are calculated for 100V line. In the case of 70V line installation, each power

tap will correspond to half the value.

Specifications are subject to change without notice

171153

210 244 166

A NEO5 IP carton contains two loudspeakers (black or white) and two metallic wall-mount brackets.

1 User Manual/Manual de Uso NEO5 IP

EN

NEO5 IP (IP 65 rating)

NEO5 IP (connection cautions)

2 User Manual/Manual de Uso NEO5 IP

EN

This loudspekaer model can be used for outdoor purpose thanks to it high IP range (IP 65). The frontal grille is sealed and the connection is made through a multi-conductor cable sealed with a gland

Remember, if you need connect the loudspeaker to 70,100V line position, the cables marked as 2 & 3 (Orange, Green), corresponding to 8 , MUST BE CONNECTED BETWEEN THEM.

Make sure to select the correct power cable before connecting the loudspeaker to a 70/100V line amplifier. If the low impedance position (8 ) is selected, the loudspeaker could be damaged!

Plastic Wall-mount bracket

8

1

21 Rear wall mounting part

Threaded Ball

M10 nut

Rear threaded insert (a)

(a) Mounted to loudspeaker

2

3

45

6

7

Allen Screw 45 mm x M6

M6 nut

6 7

Screw eyelet for safety cable (a) (b)

3 45

3 User Manual/Manual de Uso NEO5 IP

EN

WARNING: The maximum loading of this bracket (10 kg), must never be exceeded. No other items must be suspended or attached to the bracket or speaker enclosure.

42 mm

5 m

m4

5 m

m4

5 m

m

Ø

Mounting Process

Use the wall mounting part (1) to mark the fixing pointson the wall. Take into account the dimensions betweenholes and the diameters marked in figure 1.Drill wall and insert wall fixings. Screw wall mounting part to wall.Ensure that suitable screws and wall fixings are used.If in any doubt contact a suitably qualified expert.

Mount (3), (4) & (5) as shown in figure 2. Screw the threaded ball (4) into the threaded insert on the rear of the loudspeaker (6) (loudspeaker not shown below).Tighten M10 nut (5) against the loudspeaker with a spanner. The assembly will now be as shown in figure 3.

figure 1

figure 2 figure 3

figure 4

Slide the hooks of the front threaded part (2)down in to the slots of the wall mount part (1). (figure 4)

Screw on several turns (do not tighten completely).Now adjust the loudspeaker to the desired position. Hold the speaker in position and tighten the knurled ring (3) completely.Use the self tapping screw (7) provided in order to lock parts (1) & (2) together.

the rotary knurled ring (3)

Self-tapping screw

Screw eyelet fixing point for safety cable

(*) Potencia (70V)......................................Potencia (100V).........................................Potencia a baja impedancia.....................

Sensibilidad (1W/1m) .............................. 88 dB

Max. SPL ..................................................... 100 dB

Respuesta en frecuencia ........................ 60Hz - 20kHz

Elementos................................................. 5" Woofer + 0,5" Tweeter

Dimensiones ............................................ 171 x 244 x 166 mm

Material (recinto) ...................................... ABS plastic

Rango IP .................................................... IP 65

Código color RAL ..................................... RAL 9003 (W) / RAL 9004 (B)

Material (rejilla) ........................................ Aluminio

Peso........................................................... 2,3 Kg

(*) Las posiciones indicadas en el selector están calculadas para línea de 100V. En el caso de una instalación de línea 70V, cada

posición de potencia corresponderá a la mitad del valor.

Las especificaciones están sujetas a cambio sin previo aviso.

171153

210 244 166

4 User Manual/Manual de Uso NEO5 IP

Un set de NEO5 IP dos altavoces (color blanco o negro) y 2 soportes de pared metálicos.

contiene

ES

12 ) ) ) )8 (40W)

W(4k9 )/2W(2k45 )/4W(1k22 )/8W(612 ) W(5k /4W(2k5 /8W(1k2 /16W(625

5 User Manual/Manual de Uso NEO5 IP

ES

NEO5 IP (rango IP 65 )

NEO5 IP (precauciones de conexionado)

Asegúrese de seleccionar el cable correcto de potencia antes de conectar el altavoz a un amplificador de línea 70/100V. Si se selecciona el cable de baja impedancia (8 ), el altavoz puede dañarse.

Recuerde que para conectar el altavoz a una posición de línea 70/100V, los cables marcados como 2 y 3 (Naranja y Verde) correspondientes a 8 , deben CONECTARSE ENTRE SI

Este modelo de caja acústica puede ser utilizado en aplicados de exterior gracias a su alto rango IP (IP 65). La rejilla frontal está sella y el conexionado se realiza mediante un cable multi-conector sellado con un prensaestopa.

1

2

5

1 Pieza de montaje trasera pared

Bola roscada

Tuerca M10

Pieza de inserción trasera (a)

(a) Montado en el altavoz

2

3

45

6

7

Tornillo Allen 45 mm x M6

Tuerca M6

6 7

Tornillo fijación cable de seguridad (a) (b)

3 4

Soporte plástico de pared

6 User Manual/Manual de Uso NEO5 IP

ES

ATENCION: La carga máxima de este soporte metálico de pared es de (10 kg), NUNCA debe excederse. Ningún otro elementos debe colgarse de este soporte o de las sujecciones del altavoz

42 mm

5 m

m4

5 m

m4

5 m

m

Ø

Proceso de Montaje

Use la pieza de montaje (1) para marcar los puntos de fijación a la pared. Tenga en cuenta las medidas y diámetros marcados en la figura 1.Fije la pieza a la pared. Asegúrese de fijarlo con todos los tornillos. Si tiene cualquier duda, consulte con un técnico.

Monte las piezas (3), (4) y (5) como muestra la figura 2. Atornille la pieza (4) dentro de la inserción roscada del altavoz (6). Fije la tuerca M10 (5) contra el altavoz.El montaje se muestra en la figura 3 3.

figura 1

figura 2 figura 3

figura 4

Deslice la pieza frontal sobre la pieza montada en la pared (figura 4)

Atornille el aro rotativo (3) varias veces (sin fijarlo totalmente).Ahora ajuste el altavoz en la posición deseada.Fije el altavoz y apriete el aro (3) completamente.Use el tornillo de fijación del cable (7).

Tornillo de fijación

Tornillo de fijación del cable de seguridad

http://www.equipson.es

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over tothe applicable collection point for the recycling of electrical an electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and humanhealth, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Manufactured by EQUIPSON, S.A.

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over tothe applicable collection point for the recycling of electrical an electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and humanhealth, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Manufactured by EQUIPSON, S.A.