NEMO BTS Fileformat 1.14

Base Station File Format

Version 1.14

2013 by Anite Finland Ltd. All rights reserved. This document, as well as the software described in it, is furnished under license and may only be used or copied in accordance with the terms of such license. The information in this manual is intended for informational use only and is subject to change without notice. Anite Finland Ltd assumes no responsibility or liability for any errors or inaccuracies that may appear in this user manual. Except as permitted by such license, no part of this publication may be reproduced or transmitted in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written permission of Anite Finland Ltd. CDMA 2000 is a registered trademark of the Telecommunications Industry Association (TIA -USA) Printed in Finland Revision 1.14.00 Last edited June 2013

1 GENERAL STRUCTURE .................................................................................................................. 5

2 CREATING BTS FILES .................................................................................................................... 5

3 PARAMETERS ................................................................................................................................. 5

3.1 MANDATORY CELL PARAMETERS ....................................................................................... 5

3.2 OPTIONAL CELL PARAMETERS ............................................................................................ 6

3.3 AMPS CELL PARAMETERS .................................................................................................... 7

3.3.1 MANDATORY PARAMETERS ........................................................................................... 7

3.3.2 OPTIONAL PARAMETERS ................................................................................................ 7

3.3.3 CELL SEARCH METHOD .................................................................................................. 7

3.4 GSM CELL PARAMETERS ...................................................................................................... 8

3.4.1 MANDATORY PARAMETERS ........................................................................................... 8

3.4.2 OPTIONAL PARAMETERS ................................................................................................ 8

3.4.3 CELL SEARCH METHOD .................................................................................................. 9

3.5 CDMA CELL PARAMETERS .................................................................................................. 10

3.5.1 MANDATORY PARAMETERS ......................................................................................... 10

3.5.2 OPTIONAL PARAMETERS .............................................................................................. 10

3.5.3 CELL SEARCH METHOD ................................................................................................ 10

3.6 UMTS CELL PARAMETERS .................................................................................................. 11

3.6.1 MANDATORY PARAMETERS WITH 28 BIT CELL ID .................................................... 11

3.6.2 MANDATORY PARAMETERS WITH 16 BIT CELL ID AND RNC ID .............................. 11



3.7 TETRA CELL PARAMETERS ................................................................................................. 13




3.8 TD-SCDMA CELL PARAMETERS ......................................................................................... 14




3.9 WIMAX CELL PARAMETERS ................................................................................................ 16




3.10 EV-DO CELL PARAMETERS .............................................................................................. 17




3.11 LTE CELL PARAMETERS .................................................................................................. 18




3.12 IDEN CELL PARAMETERS ................................................................................................ 19




1 GENERAL STRUCTURE

The first row of the file contains the keywords that define the order of the parameters in the following lines. Keywords are separated with semicolon or tabulator character. Other rows in the file contain the cell definitions. Each line describes one cell and contains a set of parameters describing the cell as well as the site in which the cell resides. For both site and cell information, there are both mandatory parameters and optional parameters. Site and cell parameters are separated with semicolon or tabulator character. The file format supports three data types: integer, float and string. Integer type is defined as a numeric value without dot character. Float type is defined as a numeric value with dot character. String type is defined as a set of any printable ASCII characters except semicolon.

2 CREATING BTS FILES

BTS files can be created, for example, with MS Excel. Type in the cell parameters and save the file in CSV format. Finally, change the file extension to .nbf.

3 PARAMETERS

3.1 MANDATORY CELL PARAMETERS

Parameter Keyword Type Description System SYSTEM String AMPS, GSM, TDMA, CDMA, UMTS,

TETRA, TD-SCDMA, WIMAX, EVDO or LTE.

Site Name SITE String Name of the site. Cell Name CELL String Name of the cell. Latitude LAT Float Latitude of the site in degrees. Longitude LON Float Longitude of the site in degrees. Decimal degrees (DD) express latitude and longitude geographic coordinates as decimal fractions and are used in many Geographic Information Systems (GIS), web mapping applications such as Google Maps, and GPS devices. Decimal degrees are an alternative to using degrees, minutes, and seconds (DMS). As with latitude and longitude, the values are bounded by 90 and 180 each.

Positive latitudes are north of the equator, negative latitudes are south of the equator. Positive longitudes are east of Prime Meridian, negative longitudes are west of the Prime Meridian. Latitude and longitude are usually expressed in that sequence, latitude before longitude.

3.2 OPTIONAL CELL PARAMETERS

Note that BSIC number format and separator parameters are defined per BTS file, not per cell. If these two parameters are included in the BTS file, they must be located at the beginning of the file on separate rows. See example below.

Parameter Keyword Type Description Antenna Height

HEIGHT Integer Values range from 0 to 1000

Antenna Tilt TILT Float Values range from -90 to 90. Antenna Beam Width

BEAM Integer Values range from 1 to 360

BSIC Number Format

BSIC_NUMBER_FORMAT Integer Base Station Identity Code Format. Valid values are: "OCT", "DEC", and "HEX", Case is insensitive. If this keyword is not specified, DEC is used by default

Cell Range RANGE Integer Cell range in meters. Cell Type TYPE String NORMAL or REPEATER Neighbor Cell Name

NCELL_n String Unique identifier of the neighbor n.

Separator SEPARATOR String SEPARATOR can be specified by the SEPARATOR keyword. If this keyword is not specified, either ; or TAB character is used by default and it is determined from the parameter header line

User-defined column name

User-defined name String Text

Example: BSIC_NUMBER_FORMAT OCT SEPARATOR ; SYSTEM;SITE;LAT;LON;CELL;CH;BSIC;CID;LAC;DIR;NCELL_1;NCELL_2;NCELL_3 GSM;Site Name 1;65.066053;25.458366;Cell Name 1;64;77;12500;65231;0;NEMO1;NEMO2;NEMO3 GSM;Site Name 1;65.066053;25.458366;Cell Name 2;41;42;12501;5231;90;NEMO5;NEMO6;NEMO7 GSM;Site Name 1;65.066053;25.458366;Cell Name 3;2;24;12502; 65231;45;NEMO8;NEMO9;NEMO10

3.3 AMPS CELL PARAMETERS

3.3.1 MANDATORY PARAMETERS

Parameter Keyword Type Description System SYSTEM String AMPS. Site Name SITE String Name of the site. Cell Name CELL String Name of the cell. Channel Number

CH Integer Channel number

SAT SAT Integer Setup Audio Tone Antenna Direction

DIR Integer Values range from 0 to 360 degrees.

3.3.2 OPTIONAL PARAMETERS








User-defined name

String Text

Example: SYSTEM;SITE;LAT;LON;CELL;CH;SAT;CID;DIR AMPS;Site Name 1;65.066053;25.458366;Cell Name 1;140;1;11503;45 AMPS;Site Name 1;65.066053;25.458366;Cell Name 2;410;2;11501;90 AMPS;Site Name 1;65.066053;25.458366;Cell Name 3;201;3;11504;230

3.3.3 CELL SEARCH METHOD

Lines are drawn from the current location on a map to the serving cell based on the following algorithm. Matching Channel + SAT

Note that if multiple matching cells are found, closest cell is selected. The cell is matched

only if distance is less than 50 km (31 miles).

3.4 GSM CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String GSM. Site Name SITE String Name of the site. Cell Name CELL String Unique identifier of the cell. If unique name for every cell

is not available, concatenation of LAC and CI can be used.

Channel Number

CH Integer ARFCN. Values range from 0 to 1024.

BSIC BSIC Integer Base Station Identity Code in decimal format. Values range from 0 to 63. If BSIC Number Format is octal or hex, values with octal range from 0 to 77. With hex values range from 0 to 3F.

Cell ID CID Integer Cell identification. Values range from 0 to 65535. LAC LAC Integer Location Area Code. Values range from 0 to 65535. Antenna Direction



Parameter Keyword Type Description RAC RAC Integer Routing Area Code. Values range from 0 to 255. Antenna Height HEIGHT Integer Values range from 0 to 1000 Antenna Tilt TILT Float Values range from -90 to 90. Antenna Beam Width





User-defined name

String Text

Example: BSIC_NUMBER_FORMAT "OCT" SYSTEM;SITE;LAT;LON;CELL;CH;BSIC;CID;LAC;DIR;NCELL_1;NCELL_2;NCELL_3 GSM;Site Name 1;65.066053;25.458366;Cell Name 1;64;1;12500;65231;0;NEMO1;NEMO2;NEMO3 GSM;Site Name 1;65.066053;25.458366;Cell Name 2;41;1;12501; 65231;90;NEMO5;NEMO6;NEMO7 GSM;Site Name 1;65.066053;25.458366;Cell Name 3;2;1;12502; 65231;45;NEMO8;NEMO9;NEMO10


Lines are drawn from the current location on a map to the serving cell and neighbor cells based on the following algorithm.

Matching CellId + LAC Matching CellId + BCCH Matching BCCH Channel + BSIC (also for neighbor list and missing neighbors) Matching BCCH Channel (also for neighbor list and missing neighbors)



3.5 CDMA CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String CDMA. Site Name SITE String Name of the site. Cell Name CELL String Name of the cell. Pilot Number PN Integer Values range from 0 to 10000. Channel CH Integer Channel Antenna Direction



Parameter Keyword Type Description System ID SID Integer System ID. SID presents international identification and

system number identifying the service area and frequency block.

Network ID NID Integer Network ID. Antenna Height







User-defined name

String Text

Example: SYSTEM;SITE;LAT;LON;CELL;PN;CH;DIR CDMA;Site Name 1;65.066053;25.458366;Cell Name 1;171;150;90 CDMA;Site Name 1;65.066053;25.458366;Cell Name 2;272;150;55


Lines are drawn from the current location on a map to the active set and neighbor set cells based on the following algorithm.

Matching Channel + Pilot Matching Pilot



3.6 UMTS CELL PARAMETERS

3.6.1 MANDATORY PARAMETERS WITH 28 BIT CELL ID

Parameter Keyword Type Description System SYSTEM String UMTS. Site Name SITE String Name of the site. Cell Name CELL String Unique identifier of the cell. If unique name for every cell

is not available, 28 bit cell ID can be used. Channel Number

CH Integer UARFCN. Values ranges: UMTS 850, from 4357-4458,1007,1012,1032,1037,1062,1087 UMTS 900, from 2935-3090 UMTS 1900, from 9662-9938,412,437,462,487,512,537,562,587,612,637,662,687 UMTS 2100, from 10550 to 10850. UMTS 2100 AWS, from 1535-1740,1887,1912,1937,1962,1987,2012,2037,2062,2087 .

Scrambling Code

SCR Integer Values range from 0 to 512.

Cell ID CID Integer Cell ID. The 28-bit Cell Identity (UC-Id in 3GPP) is a Concatenation of RNC-ID and C-ID.

Antenna Direction

DIR Integer Values range from 0 to 360.

3.6.2 MANDATORY PARAMETERS WITH 16 BIT CELL ID AND RNC ID

Parameter Keyword Type Description System SYSTEM String UMTS. Site Name SITE String Name of the site. Cell Name CELL String Unique identifier of the cell. If unique name for every cell

is not available, 28 bit cell ID can be used. Channel Number

CH Integer UARFCN. Values ranges: UMTS 850, from 4357-4458,1007,1012,1032,1037,1062,1087 UMTS 900, from 2935-3090 UMTS 1900, from 9662-9938,412,437,462,487,512,537,562,587,612,637,662,687 UMTS 2100, from 10550 to 10850. UMTS 2100 AWS, from 1535-1740,1887,1912,1937,1962,1987,2012,2037,2062,2087

Scrambling Code

SCR Integer Values range from 0 to 512.

Cell ID CID_16 Integer Cell ID. The 16-bit Cell Identity. C-ID. RNC ID RNCID Integer RNC ID. The 12- bit RNC identity. Cell-ID (28 bit) = RNC-

ID (12 bit) + CI (16 bit). Antenna Direction


Note that Cell ID must be given either with 28- bit (CID) or 16-bit format (CID_16) combined with 12- bit RNC ID (RNCID).


Parameter Keyword Type Description LAC LAC Integer Location Area Code. Values range from 0 to 65535. RAC RAC Integer Routing Area Code. Values range from 0 to 255. URA URA Integer UTRAN Registration Area RNC ID RNCID Integer Radio Network Controller ID. Equal to the 12-bit RNCId

in 3GPP TS 25.401, section 6.1.5. Integer, base 10 or (with prefix 0x) hexadecimal representation.

Antenna Height HEIGHT Integer Values range from 0 to 1000 Antenna Tilt TILT Float Values range from -90 to 90. Antenna Beam Width





User-defined name

String Text

Example with 28- bit Cell ID: SYSTEM;SITE;LAT;LON;CELL;CH;BSIC;CID;SCR;DIR;NCELL_1;NCELL_2;NCELL_3 UMTS;Site Name 1;65.066053;25.458366;Cell Name 1;10838;;123811;96;0;NEMO1;NEMO2;NEMO3 UMTS;Site Name 1;65.066053;25.458366;Cell Name 2;10838;;123758;2;0;NEMO4;NEMO5;NEMO6 UMTS;Site Name 1;65.056053;25.458366;Cell Name 3;10838;;123769;4;90;NEMO7;NEMO8;NEMO9 Example with 16- bit Cell ID: SYSTEM;SITE;LAT;LON;CELL;CH;BSIC;CID_16;RNC_ID;SCR;DIR;NCELL_1;NCELL_2;NCELL_3 UMTS;Site Name 1;65.066053;25.458366;Cell Name 1;10838;;58275;1;96;0;NEMO1;NEMO2;NEMO3 UMTS;Site Name 1;65.066053;25.458366;Cell Name 2;10838;;58222;1;2;0;NEMO4;NEMO5;NEMO6 UMTS;Site Name 1;65.056053;25.458366;Cell Name 3;10838;;58233;1;4;90;NEMO7;NEMO8;NEMO9


Lines are drawn from the current location on a map to the active set and monitored set cells based on the following algorithm.

Matching Cell ID Matching Carrier + SCR (also for neighbor list and missing neighbors)



3.7 TETRA CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String TETRA. Site Name SITE String Name of the site. Cell Name CELL String Name of the cell. LAC LAC Integer Location Area Code. Values range from 0 to 16383. Main Carrier CH Integer Values range from 0 to 4095. Frequency Band

BAND Integer Values range from 0 to 15.

Antenna Direction










User-defined name

String Text

Example: SYSTEM;SITE;LAT;LON;CELL;LAC;CH;BAND;DIR TETRA;Site Name 1;65.066053;25.458366;Cell Name 1;3652;124;3;90 TETRA;Site Name 1;65.066053;25.458366;Cell Name 2;3613;125;3;45 TETRA;Site Name 1;65.056053;25.458366;Cell Name 3;3622;68;3;0



Matching Channel + LAC + Band

Note that if multiple matching cells are found, closest cell is selected. The cell is matched only if distance is less than 50 km (31 miles).

3.8 TD-SCDMA CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String TDSCDMA or TD-SCDMA. Site Name SITE String Name of the site. Cell Name CELL String Name of the cell. Channel Number

CH Integer Values range from 9504 to 10121.

Cell Parameters Id

CPID Integer Values range from 0 to 127.

Cell ID CID Integer Cell ID (16- bit) Antenna Direction



Parameter Keyword Type Description LAC LAC Integer Location Area Code. Values range from 0 to 65535. RAC RAC Integer Routing Area Code. Values range from 0 to 255. URA URA Integer UTRAN Registration Area RNC ID RNCID Integer Radio Network Controller ID Antenna Height HEIGHT Integer Values range from 0 to 1000 Antenna Tilt TILT Float Values range from -90 to 90. Antenna Beam Width





User-defined name

String Text

Example: SYSTEM;SITE;LAT;LON;CELL;CH;BSIC;CID;CPID;DIR TDSCDMA;Site Name 1;65.066053;25.458366;Cell Name 1;10120;;;96;0 TDSCDMA;Site Name 1;65.066053;25.458366;Cell Name 2;10120;;;2;30 TDSCDMA;Site Name 1;65.056053;25.458366;Cell Name 3;10120;;;4;90



Matching Cell ID (16 bit) Matching Carrier + Cell Parameters Id (also for neighbor list)



3.9 WIMAX CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String WIMAX. Site Name SITE String Name of the site. Cell Name CELL String Name of the cell. Frequency FREQ Float Frequency in MHz. Preamble Index

PI Integer Values range from 0 to 113.

Antenna Direction


Base Station ID

BSID String Base Station ID. Six colon separated hex values in double quotes.


Parameter Keyword Type Description Antenna Height HEIGHT Integer Values range from 0 to 1000 Antenna Tilt TILT Float Values range from -90 to 90. Antenna Beam Width





User-defined name

String Text

Example: SYSTEM;SITE;LAT;LON;CELL;FREQ;PI;DIR;BSID WIMAX;Site Name 1;65.066053;25.458366;Cell Name 1;2550.000;67;90;03:0f:21:00:02:72 WIMAX;Site Name 1;65.066053;25.458366;Cell Name 2;2550.000;68;180;03:0f:21:00:02:73 WIMAX;Site Name 1;65.056053;25.458366;Cell Name 3;2550.000;69;270; 03:0f:21:00:02:74



Base Station ID + Preamble index Frequency + Preamble index

Note that if multiple matching cells are found, closest cell is selected. The cell is matched only if distance is less than 50 km (31 miles).

3.10 EV-DO CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String EVDO. Site Name SITE String Name of the site. Cell Name CELL String Name of the cell. Pilot Number PN Integer Values range from 0 to 10000. Channel CH Integer Channel Antenna Direction



Parameter Keyword Type Description System ID SID Integer System ID. SID presents international identification and

system number identifying the service area and frequency block.

Network ID NID Integer Network ID. Antenna Height







User-defined name

String Text

Example: SYSTEM;SITE;LAT;LON;CELL;PN;CH;DIR EVDO;Site Name 1;65.066053;25.458366;Cell Name 1;171;150;90 EVDO;Site Name 1;65.066053;25.458366;Cell Name 2;272;150;55


Lines are drawn from the current location on a map to the active set and neighbor set cells based on the following algorithm.

Matching Channel + Pilot Matching Pilot

Note that if multiple matching cells are found, the closest cell is selected. The cell is

matched only if distance is less than 50 km (31 miles).

3.11 LTE CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String LTE Site Name SITE String Name of the site. Cell Name CELL String Unique identifier of the cell. If there is no unique name

available for every cell, Cell ID (CID) can be used Channel Number

CH Integer EARFCN number. Values range from 0 to 65535

Cell ID CID Integer Cell identification Cell identification of the current cell. Range: 0 268435455

Physical Layer Cell ID

PCI Integer Values range from 0 to 503.

Antenna Direction



Parameter Keyword Type Description TAC TAC Integer Tracking area code

Tracking area code of the currently used cell. See 3GPP TS 124.301 subclause 9.9.3.32. Range: 0 65535

Antenna Height HEIGHT Integer Values range from 0 to 1000 Antenna Tilt TILT Float Values range from -90 to 90. Antenna Beam Width





User-defined name

String Text

Example: SYSTEM;SITE;LAT;LON;CELL;CH;CID;PCI;DIR;NCELL_1;NCELL_2;NCELL_3 LTE;Site Name 1;65.066053;25.458366;Cell Name 1;65535;26842545;96;0;NEMO1;NEMO2;NEMO3 LTE;Site Name 1;65.066053;25.458366;Cell Name 2;65535;26841545;2;0;NEMO4;NEMO5;NEMO6 LTE;Site Name 1;65.056053;25.458366;Cell Name 3;65535;26844545;4;90;NEMO7;NEMO8;NEMO9



Cell Identification (Cell ID) (for serving cell) Matching Channel number + Physical Layer Cell ID (for both serving and neighbor cells)

3.12 IDEN CELL PARAMETERS


Parameter Keyword Type Description System SYSTEM String IDEN Site Name SITE String Name of the site. Cell Name CELL String Unique identifier of the cell. If unique name for every cell

is not available, concatenation of CH and CC can be used.

Channel Number

CH Integer Values range from 1 to 1200.

Color Code CC Integer Color code Range: 0 15

Antenna Direction



Parameter Keyword Type Description Antenna Height HEIGHT Integer Values range from 0 to 1000 Antenna Tilt TILT Float Values range from -90 to 90. Antenna Beam Width





User-defined name

String Text



Matching channel number + color code (for both serving and neighbor cells)

Note that if multiple matching cells are found, the closest cell is selected. The cell is matched only if distance is less than 50 km (31 miles).

Base Station File FormatVersion 1.14

1 GENERAL STRUCTURE2 Creating BTS Files3 PARAMETERS3.1 Mandatory CELL parameters3.2 OPTIONAL CELL PARAMETERS3.3 AMPS CELL PArameters3.3.1 mandatory parameters3.3.2 OPTIONAL parameters3.3.3 Cell Search Method

3.4 GSM CELL PArameters3.4.1 mandatory parameters3.4.2 OPTIONAL parameters3.4.3 Cell Search Method

3.5 CDMA CELL PArameters3.5.1 MAndatory PARAMETERS3.5.2 OPTIONAL parameters3.5.3 Cell Search Method

3.6 UMTS CELL PArameters3.6.1 MANDATORY PARameters with 28 bit cell id3.6.2 MANDATORY PARameters with 16 bit cell id and rnc id3.6.3 OPTIONAL parameters3.6.4 Cell Search Method

3.7 TETRA CELL PArameters3.7.1 MANDATORY PARameters3.7.2 OPTIONAL parameters3.7.3 Cell Search Method

3.8 TD-SCDMA CELL PArameters3.8.1 MANDATORY PARameters3.8.2 OPTIONAL parameters3.8.3 Cell Search Method

3.9 WIMAX CELL PArameters3.9.1 MANDATORY PARameters3.9.2 OPTIONAL parameters3.9.3 Cell Search Method

3.10 EV-DO CELL PArameters3.10.1 MAndatory PARAMETERS3.10.2 OPTIONAL parameters3.10.3 Cell Search Method

3.11 LTE CELL PArameters3.11.1 MANDATORY PARameters3.11.2 OPTIONAL parameters3.11.3 Cell Search Method

3.12 IDEN CELL PArameters3.12.1 mandatory parameters3.12.2 OPTIONAL parameters3.12.3 Cell Search Method

DescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthBase Station Identity Code Format. Valid values are: "OCT", "DEC", and "HEX", Case is insensitive. If this keyword is not specified, DEC is used by default IntegerBSIC_NUMBER_FORMATBSIC Number FormatRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameCell IDDescriptionTypeKeywordParameterValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterDescriptionTypeKeywordParameterIntegerSIDSystem IDIntegerNIDNetwork IDValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterLocation Area Code. Values range from 0 to 65535.IntegerLACLACRouting Area Code. Values range from 0 to 255.IntegerRACRACUTRAN Registration AreaIntegerURAURAValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterLocation Area Code. Values range from 0 to 65535.IntegerLACLACRouting Area Code. Values range from 0 to 255.IntegerRACRACUTRAN Registration AreaIntegerURAURAValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterDescriptionTypeKeywordParameterIntegerSIDSystem IDIntegerNIDNetwork IDValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterTracking area code Tracking area code of the currently used cell. See 3GPP TS 124.301 subclause 9.9.3.32.Range: 0 65535IntegerTACTACValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell TypeDescriptionTypeKeywordParameterCell NameDescriptionTypeKeywordParameterValues range from 0 to 1000IntegerHEIGHTAntenna HeightTILTAntenna TiltBEAMAntenna Beam WidthRANGECell RangeTYPECell Type

NEMO BTS Fileformat 1.14

Documents

Transcript of NEMO BTS Fileformat 1.14