NEMA Enclouser Description p14

1
General Information NEMA Enclosure Descriptions General Siemens Industrial Control Products 14 Application Data 1 NEMA Standard Publications No. 250-1979 Type 1 Type 1 enclosures are intended for indoor use primarily to provide a degree of pro- tection against contact with the enclosed equipment in locations where unusual ser- vice conditions do not exist. The enclo- sures shall meet the rod entry and rust resistance design tests. Type 3 Type 3 enclosures are intended for out- door use, primarily to provide a degree of protection against windblown dust, rain and sleet, and to be undamaged by the formation of ice on the enclosure. They shall meet rain, external icing, dust, and rust resistance design tests. They are not intended to provide protection against conditions such as internal condensation or internal icing. Type 3R Type 3R enclosures are intended for out- door use, primarily to provide a degree of protection against falling rain, and to be undamaged by the formation of ice on the enclosure. They shall meet rod entry, rain, external icing, and rust resistance design tests. They are not intended to provide protection against conditions such as dust, internal condensation, or internal icing. Type 4 Type 4 enclosures are intended for indoor or outdoor use, primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose directed water, and to be undamaged by the formation of ice on the enclosure. They shall meet hosedown, external icing, and rust resistance design tests. They are not intended to provide protection against conditions such as internal condensation or internal icing. Type 4X Type 4X enclosures are intended for indoor or outdoor use, primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, and hose-directed water, and to be undamaged by the formation of ice on the enclosure. They shall meet hosedown, external icing, and corrosion resistance design tests. They are not intended to provide protection against conditions such as internal condensation or internal icing. Shall be manufactured of American Iron and Steel Institute Type 304 Stainless steel, polymerics, or materials with equiv- alent corrosion resistance to provide a degree of protection against specific cor- rosive agents. Type 6 Type 6 enclosures are intended for indoor or outdoor use, primarily to provide a degree of protection against the entry of water during occasional temporary sub- mersion at a limited depth. Type 6P enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against the entry of water during prolonged submersion at a limited depth. Type 7 Type 7 enclosures are for indoor use in locations classified as Class l, Groups C or D, as defined in the National Electrical Code. Type 7 enclosures shall be capable of withstanding the pressures resulting from an internal explosion of specified gases and contain such an explosion sufficiently that an explosive gas-air mixture existing in the atmosphere surrounding the enclo- sure will not be ignited. Enclosed heat generating devices shall not cause exter- nal surfaces to reach temperatures capa- ble of igniting explosive gas-air mixtures in the surrounding atmosphere. Enclosures shall meet explosion, hydrostatic, and temperature design tests. Type 9 Type 9 enclosures are intended for indoor use in locations classified as Class ll Groups E, F or G, as defined in the National Electrical Code. Type 9 enclosures shall be capable of preventing the entrance of dust. Enclosed heat generating devices shall not cause external surfaces to reach temperatures capable of igniting or discoloring dust on the enclosure or igniting dust-air mix- tures in the surrounding atmosphere. Enclosures shall meet dust penetration and temperature design tests, and aging of gaskets (if used). Class lFlammable gases or vapors. Class llCombustible dust. Class lllIgnitable fibers or flyings. Division lNormal situation; the hazard would be expected to be present in every- day repair and maintenance. Division llAbnormal situation; the material is expected to be confined within closed containers or closed systems and will be present only during accidental rup- ture, breakage or unusual faulty operation. Groups Class lGases and vapors are designed for use in groups C and D, depending on the ignition temperature of the substance, its explosion pressure and other flam- mable characteristics. Class llDust locations are designed for use in groups E, F, and G, according to the ignition temperature and conductivity of the hazardous substance. Type 12 Type 12 enclosures are intended for indoor use primarily to provide a degree of protection against dust, falling dirt, and dripping non-corrosive liquids. They shall meet drip, dust, and rust resistance design tests. They are not intended to provide protection against conditions such as internal condensation. Siemens NEMA 12 may be field modified for outdoor use. NEMA 3 requires the use of watertight conduit hubs. NEMA 3R requires the use of watertight conduit hubs at a level above the lowest live part and drain holes of 1 /8" diameter shall be added at the bottom of the enclosure. Type 13 Type 13 enclosures are intended for indoor use primarily to provide a degree of protection against dust, spraying of water, oil and non-corrosive coolant. They shall meet oil explosion and rust resistance design tests. They are not intended to provide protection against conditions such as internal condensation. Type 1 Type 3/3R Type 4/4X Type 4X Type 3, 4, 7 & 9 Type 12 & 13

description

NEMA Enclouser Description

Transcript of NEMA Enclouser Description p14

  • General Information NEMA Enclosure Descriptions

    General

    Siemens Industr ial Control Products

    14

    App

    licat

    ion

    Dat

    a

    1

    NEMA Standard PublicationsNo. 250-1979

    Type 1Type 1 enclosures are intended for indooruse primarily to provide a degree of pro-tection against contact with the enclosedequipment in locations where unusual ser-vice conditions do not exist. The enclo-sures shall meet the rod entry and rustresistance design tests.

    Type 3Type 3 enclosures are intended for out-door use, primarily to provide a degree ofprotection against windblown dust, rainand sleet, and to be undamaged by theformation of ice on the enclosure. Theyshall meet rain, external icing, dust, andrust resistance design tests. They are notintended to provide protection againstconditions such as internal condensationor internal icing.

    Type 3RType 3R enclosures are intended for out-door use, primarily to provide a degree ofprotection against falling rain, and to beundamaged by the formation of ice on theenclosure. They shall meet rod entry, rain,external icing, and rust resistance designtests. They are not intended to provideprotection against conditions such asdust, internal condensation, or internalicing.

    Type 4Type 4 enclosures are intended for indooror outdoor use, primarily to provide adegree of protection against windblowndust and rain, splashing water, and hosedirected water, and to be undamaged bythe formation of ice on the enclosure.They shall meet hosedown, external icing,and rust resistance design tests. They arenot intended to provide protection againstconditions such as internal condensationor internal icing.

    Type 4XType 4X enclosures are intended forindoor or outdoor use, primarily to providea degree of protection against corrosion,windblown dust and rain, splashing water,and hose-directed water, and to beundamaged by the formation of ice on the enclosure. They shall meet hosedown,external icing, and corrosion resistance

    design tests. They are not intended toprovide protection against conditions suchas internal condensation or internal icing.

    Shall be manufactured of American Ironand Steel Institute Type 304 Stainlesssteel, polymerics, or materials with equiv-alent corrosion resistance to provide adegree of protection against specific cor-rosive agents.

    Type 6Type 6 enclosures are intended for indooror outdoor use, primarily to provide adegree of protection against the entry ofwater during occasional temporary sub-mersion at a limited depth.

    Type 6P enclosures are intended forindoor or outdoor use primarily to providea degree of protection against the entry of water during prolonged submersion at alimited depth.

    Type 7Type 7 enclosures are for indoor use inlocations classified as Class l, Groups C orD, as defined in the National ElectricalCode.

    Type 7 enclosures shall be capable ofwithstanding the pressures resulting froman internal explosion of specified gasesand contain such an explosion sufficientlythat an explosive gas-air mixture existingin the atmosphere surrounding the enclo-sure will not be ignited. Enclosed heatgenerating devices shall not cause exter-nal surfaces to reach temperatures capa-ble of igniting explosive gas-air mixtures inthe surrounding atmosphere. Enclosuresshall meet explosion, hydrostatic, andtemperature design tests.

    Type 9Type 9 enclosures are intended for indooruse in locations classified as Class llGroups E, F or G, as defined in the NationalElectrical Code.

    Type 9 enclosures shall be capable ofpreventing the entrance of dust. Enclosedheat generating devices shall not causeexternal surfaces to reach temperaturescapable of igniting or discoloring dust on the enclosure or igniting dust-air mix-tures in the surrounding atmosphere.Enclosures shall meet dust penetrationand temperature design tests, and agingof gaskets (if used).

    Class lFlammable gases or vapors.

    Class llCombustible dust.

    Class lllIgnitable fibers or flyings.

    Division lNormal situation; the hazardwould be expected to be present in every-day repair and maintenance.

    Division llAbnormal situation; thematerial is expected to be confined withinclosed containers or closed systems andwill be present only during accidental rup-ture, breakage or unusual faulty operation.

    Groups Class lGases and vapors are designedfor use in groups C and D, depending onthe ignition temperature of the substance,its explosion pressure and other flam-mable characteristics.

    Class llDust locations are designed foruse in groups E, F, and G, according to theignition temperature and conductivity ofthe hazardous substance.

    Type 12Type 12 enclosures are intended forindoor use primarily to provide a degree of protection against dust, falling dirt, and dripping non-corrosive liquids. Theyshall meet drip, dust, and rust resistancedesign tests. They are not intended toprovide protection against conditions such as internal condensation.

    Siemens NEMA 12 may be field modifiedfor outdoor use. NEMA 3 requires the useof watertight conduit hubs. NEMA 3Rrequires the use of watertight conduithubs at a level above the lowest live partand drain holes of 18" diameter shall beadded at the bottom of the enclosure.

    Type 13Type 13 enclosures are intended forindoor use primarily to provide a degree of protection against dust, spraying ofwater, oil and non-corrosive coolant. They shall meet oil explosion and rustresistance design tests. They are notintended to provide protection againstconditions such as internal condensation.

    Type 1 Type 3/3R Type 4/4X Type 4X Type 3, 4, 7 & 9 Type 12 & 13